Samsung WF8600NGA, WF8600NG, WF8600NGC, WF8600NGD, WF8600NGF User Manual

Washing Machine

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at

www.samsung.com/hk

WF8600NG(A/C/D/F/G/H/R/S/T/V/W/Z)

2_ features

features of your new samsung
washing machine

Your new washing machine will change the way you feel about doing laundry. From
its super-size capacity to its energy efficiency, the Samsung washing machine has
all the features to turn a mundane chore into a pleasure.

• Standard/ Intensive

This program has a unique apperceiving function. It can apperceive the laundry weight
automatically to select an appropriate water level, and so that saves more energy.

• Child Lock

The Child Lock function ensures that curious little hands are kept out of your washing
machine.
This safety feature stops your children from playing with the operation of the washing
machine, and alerts you when it is activated.

• Delay End

Delay a cycle for up to 19 hours in one-hour increment and increase the convenience of using
your washing machine especially when you have to go out.

• Quick Wash

No time to lose! Less than 30 minutes wash will give you time to run out before it’s too late.
Our 28 minute Quick Wash program can be the solution to your busy life. Now you can wash
your favourite clothes in only 28 minutes!

• Delicates & Hand Wash Program

Special care can be determined by the appropriate temperature, the gentle wash action and
the appropriate amount of water.

• Enzyme

Selecting Enzyme can keep the wash temperature 40~95 ˚C, which is the best condition for
wash.

• Ceramic Heater for Durability & Energy Saving (selected models)

Our truly innovative Ceramic Heater is twice as durable as regular heaters.
That saves you money on repairs. Plus, it eliminates the scale of hard water and save energy.

features _3

• Wide door

Extra wide door aperture for convenient viewing! Easily add and remove laundry, especially for
large sized laundry items such as bedding, towels etc.

This manual contains important information on the installation, use, and care of your new
Samsung washing machine. Refer to it for descriptions of the control panel, instructions on how
to use the washing machine, and tips for making the most of its state-of-the-art features and
functions. The “Troubleshooting and information codes” section on page 29 tells you what to
do if something goes wrong with your new washing machine.

4_ safety information

safety information

Throughout this manual, you’ll see Warning and Caution notes. These
warnings, cautions, and the important safety instructions that follow do not cover
all possible conditions and situations that may occur. It’s your responsibility to use
common sense, caution, and care when installing, maintaining, and operating your
washing machine. Samsung is not liable for damages resulting from improper use.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury
or death.

CAUTION

Hazards or unsafe practices that may result in minor personal injury or
property damage

.

CAUTION

To reduce the risk of fire, explosion, electric shock, or personal
injury when using your washing machine, follow these basic safety
precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Notice

These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

As with any equipment using electricity and moving parts, potential hazards exist. To safely
operate this appliance, become familiar with its operation and exercise care when using it.

Install and store your washing machine inside, away from exposure to weather.

Install and level your washing machine on a floor that can support its weight.

Your washing machine must be properly grounded. Never plug it into an ungrounded outlet.

safety information _5

To reduce the risk of fire or explosion:

• Do not wash items that have been washed, soaked, or treated with gasoline, dry
cleaning solvents, or other flammable or explosive substances. They give off vapors that
could ignite or explode. Rinse by hand any material that has been exposed to cleaning
solvent or other flammable liquids or solids before putting in your washing machine. Be
sure that all traces of such liquids, solids, and fumes have been removed. Dangerous
substances include acetone, denatured alcohol, gasoline, kerosene, certain liquid
household cleaners and spot removers, turpentine, waxes, and wax removers.

• Do not put gasoline, dry cleaning solvents, or other flammable or explosive substances
into the washing machine.

• Under certain conditions, hydrogen gas may be produced in a hot water system–such
as your hot water heater -- that has not been used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or
more, turn on all hot water taps in your home, and let the water flow for several minutes
before using your washing machine. This will release any hydrogen gas build–up. Since
hydrogen gas is flammable, do not smoke or light an open flame during this time.

Ventilate immediately without touching the power plug if there is a gas leak.

Unplug the power cord before servicing your washing machine.

Before each wash, empty the pockets of your laundry. Small, irregularly shaped hard
objects, such as coins, knives, pins, and paperclips could damage your washing machine.
Do not wash clothing with large buckles, buttons, or other heavy metal metal.

Do not open the door of the washing machine if you can still see water. Check that the
water has drained before opening the door.

Do not repair, replace, or service any part of your washing machine yourself unless you fully
understand the recommended user–repair instructions and have the skills to carry them
out. Work done by an unauthorized person may void your warranty.

Connect the washing machine to the water mains using the new set of hoses. Do not reuse
the old set of hoses.

Water inlet hoses deteriorate over time. Check the hoses periodically for bulges, kinks, cuts,
wear, and leaks, and replace them as needed and at least every five years.

All packaging and shipping bolts must be removed before the appliance is used. Serious
damage may occur if they are not removed. See page 12 “Removing the shipping bolts”.

Before washing clothes for the first time, you must run a complete cycle without clothes.
See “Washing for the first time”.

CAUTION

6_ safety information

The appliance is designed for home use only.

Make sure that water and electrical connections are made by qualified technicians,
observing the user manual (see “Installing your washing machine”) and local safety
regulations.

Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet.

Always unplug the appliance and turn off the water after use.

Make sure that the pockets of all clothing to be washed are empty.

Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.

Never allow pets and children to play on or in the appliance. It may cause injury or suffocate
them.

The glass door becomes very hot during the washing cycle. Never touch on the glass door
while it is in use.

Do not attempt to repair the appliance yourself. Repairs made by inexperienced or
unqualified persons may cause injury and/or make more serious repairs to the appliance
necessary.

If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.

This appliance should only be serviced by our authorized service center, and only rated
spare parts should be used.

Do not let children (or pets) play on or in your washing machine. The washing machine door
does not open easily from the inside, and children may be seriously injured if trapped inside.

This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.

Children should be supervised to ensure that they do not play with the appliance.

To use this appliance safely, the user should become familiar with the instructions for
operation of the appliance and always take extra care when using it.

This appliance should be positioned to be accessible to the power plug, the water supply
tabs and the drain pipes.

Packing materials can be dangerous to children; keep all packing material (plastic bags,
polystyrene, etc.) well out of the reach of children.

Do not use processed water containing oil, cream or lotion, which is usually found in
skincare shops or massage clinics.

• Otherwise this will cause the packing to be deformed, which causes a malfunction or
water leak.

safety information

WARNING

WARNING

WARNING

WARNING

safety information _7

A stainless washing tub does not usually rust. However if some metal such as a hair pin is
left in the tub for an extended time, the tub could rust.

• Do not leave water or bleach containing chlorine in the tub for an extended period of
time.

• Do not regularly use or leave water containing iron in the tub for an extended period of
time. If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral)
to the surface and use a sponge or soft cloth to clean it. (Under no circumstances use a
metal brush)

For washing machines with ventilation openings in the base, ensure that the opening is not
obstructed by carpet or any other obstacles.

Use the new hose-sets and old hose-sets should not be reused.

Instruction about the WEEE mark

This marking shown on the product or its literature, indicates that it should not be disposed
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources.

Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling.

Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for disposal.

8_ contents

contents

SETTING UP YOUR WASHING

MACHINE

9

9 Checking the parts
10 Meeting installation requirements

10 Electrical supply and grounding
10 Water Supply
11 Drain
11 Flooring
11 Surrounding temperature
11 Alcove or closet installation

11 Installing your washing machine

WASHING A LOAD OF LAUNDRY

17

17 Washing for the first time
17 Basic instructions
18 Using the control panel

20 Child lock
20 Sound off
20 Delay end
21 Washing clothes using fuzzy logic
22 Washing clothes manually

22 Laundry guidelines
24 Detergent and additives information

24 Which detergent to use
24 Detergent drawer

CLEANING AND MAINTAINING YOUR

WASHING MACHINE

25

25 Draining the washing machine in an emergency
25 Cleaning the exterior
26 Cleaning the detergent drawer and drawer

recess

27 Cleaning the debris filter
27 Cleaning the water hose mesh filter
28 Repairing a frozen washing machine
28 Storing your washing machine

TROUBLESHOOTING AND

INFORMATION CODES

29

29 Check these points if your washing machine...
30 Information codes

CYCLE CHART

31

31 Cycle chart

APPENDIX

32

32 Fabric care chart
32 Protecting the environment
32 Declaration of conformity
33 Specifications

10_ setting up your new washing machine

setting up your washing
machine

MEETING INSTALLATION REQUIREMENTS

Electrical supply and grounding

To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest
Revision and local codes and ordinances. It is the personal responsibility of the appliance owner
to provide adequate electrical service for this appliance.

Never use an extension cord.
Use only the power cord that comes with your washing machine.

When preparing for installation, ensure that your power supply offers:

• 220V~240V 50Hz 15 AMP fuse or circuit breaker

• Individual branch circuit serving only your washing machine

Your washing machine must be grounded. If your washing machine malfunctions or breaks
down, grounding will reduce the risk of electric shock by providing a path of least resistance for
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in
a properly installed and grounded outlet.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Improperly connecting the equipment-grounding conductor can result in electrical shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is
properly grounded. Do not modify the plug provided with the washing machine. If it does not fit
the outlet, have a proper outlet installed by a qualified electrician.

Water Supply

Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water
pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut
off completely. Or, it may take the washing machine longer to fill than what the controls allow,
resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/
flooding if an internal hose becomes loose, is built into the controls.)

The water taps must be within 4 feet (122cm) of the back of your washing machine for the
provided inlet hoses provided to reach your washing machine.

Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305cm) long.

You can reduce the risk of leaks and water damage by:

• Making water taps easily accessible.

• Turning off taps when the washing machine is not in use.

• Periodically checking for leaks at water inlet hose fittings.
Before using your washing machine for the first time, check all connections at the water

valve and taps for leaks.

WARNING

WARNING

setting up your new washing machine _11

01 SETTING UP

Drain

Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed
through the drain hose clip to the standpipe. The standpipe must be large enough to accept the
outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, your washing machine must be installed on a solidly constructed floor.
Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting
and soft tile surfaces are contributing factors to vibrations and the tendency for your washing
machine to move slightly during the spin cycle.

Never install your washing machine on a platform or poorly supported structure.

Surrounding temperature

Do not install your washing machine in areas where water may freeze, since your washing
machine always retains some water in its water valve, pump, and hose areas. Frozen water in
the lines can cause damage to belts, the pump, and other components.

Alcove or closet installation

To operate safely and properly, your new washing machine requires minimum clearances of:

Sides – 25 mm Rear – 51 mm

Top – 25 mm Front – 465 mm

If both the washing machine and a dryer are installed together, the front of the alcove or closet
must have at least 465 mm unobstructed air opening. Your washing machine alone does not
require a specific air opening.

INSTALLING YOUR WASHING MACHINE

STEP 1

Selecting a location

Before you install the washing machine, make sure the location:

• Has a hard, level surface without carpeting or flooring that may obstruct ventilation

• Is away from direct sunlight

• Has adequate ventilation

• Will not be freezing (below 32 ˚F or 0 ˚C)

• Is away from heat sources such as oil or gas

• Has enough space so that the washing machine doesn’t stand on its power cord

12_ setting up your new washing machine

STEP 2

Removing the shipping bolts

Before installing the washing machine, you must remove the five shipping bolts from the back of
the unit.

1. Loosen all the bolts with the supplied wrench.

2. Hold the bolt with the spanner and pull it through the wide

section of the hole. Repeat for each bolt.

3. Fill the holes with the supplied plastic covers.

4. Store the shipping bolts away safely in case you have to move the washing machine in the

future.

Packaging materials can be dangerous to children; keep all packaging material (plastic
bags, polystyrene, etc.) well out of the reach of children.

Insert the cap fixer, (one of the accessories
in the vinyl pack), into the hole from which
you removed the power cord at the back
of the product.

setting up your washing
machine

WARNING

setting up your new washing machine _13

01 SETTING UP

STEP 3

Adjusting the levelling feet

When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.

1. Slide the washing machine into position.

2. Level your washing

machine by turning the
leveling feet in and out as
necessary by hand.

3. When your washing machine is level, tighten the nuts using

the wrench supplied with your washing machine.

STEP 4

Connecting the water and drain

Connecting the water supply hose

1. Take the L-shaped arm fitting for the cold water

supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.

The water supply hose must be connected
to the washing machine at one end and to
the water tap at the other. Do not stretch the
water supply hose. If the hose is too short,
replace the hose with a longer, high pressure
hose.

2. Connect the other end of the cold water supply

hose to your sink’s cold water tap and tighten
it by hand. If necessary, you can reposition the
water supply hose at the washing machine end
by loosening the fitting, rotating the hose, and
retightening the fitting.

For selected models with an additional hot water intake:

1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot

water supply intake on the back of the machine. Tighten by hand.

2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten

it by hand.

14_ setting up your new washing machine

Connecting the water supply hose (selected models)

1. Remove the adaptor from the water supply hose.

2. First, using a ‘+’ type screwdriver, loosen the four screws

on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.

3. Connect the adaptor to the water tap by tightening the

screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).

4. Connect the water supply hose to the adaptor.

When you release part (3), the hose automatically
connects to the adaptor making a ‘click’ sound.

After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.

5. Connect the other end of the water supply hose to the inlet

water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.

setting up your washing
machine

Adaptor

Water supply
hose

1

2

5 mm

3

1

2

Water tap

setting up your new washing machine _15

01 SETTING UP

6. Turn on the water supply and ensure that no water leaks

from the water valve, tap or adaptor. If there is a water leak,
repeat the previous steps.

Do not use your washing machine if there is a water leak.
This may cause electric shock or injury.

• If the water tap is a screw type tap, connect the water

supply hose to the tap as shown.

Use the most conventional type of tap for the water supply. In case the tap is square or too
big, remove the spacing ring before inserting the tap into the adaptor.

✗

✗

WARNING

16_ setting up your new washing machine

Connecting the drain hose

The end of the drain hose can be positioned in three ways:

1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60

and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure
the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose
from moving.

2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that

the end of the hose is at least 60 cm above the ground.

3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than

60 cm and no longer than 90 cm.

STEP 5

Powering your washing machine

Plug the power cord into a wall socket, a 230 volt 50 Hz approved electrical outlet protected by
a 15-amp fuse or comparable circuit breaker. (For more information on electrical and grounding
requirements, see page 10.)

setting up your washing
machine

Drain hose

Hose guide

60 ~ 90 cm

washing a load of laundry _17

02 WASHING A LOAD OF LAUNDRY

washing a load of laundry

With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash first.

WASHING FOR THE FIRST TIME

Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).

1. Press the Power button.

2. Add a little detergent to the detergent compartment in

the detergent drawer.

3. Turn on the water supply to the washing machine.

4. Turn the Fuzzy Control dial to Drum Clean.

5. Press the Start/Pause button.

This will remove any water that might be left over in the
machine from the manufacturer’s test run.

Compartment : Detergent for prewash, or starch.
Compartment : Detergent for the main wash, water softener, pre-soaking agent, bleach and

stain removal product.

Compartment : Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX)

of “A”)

BASIC INSTRUCTIONS

1. Load your laundry into the washing machine.

Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 23.

• Make sure that laundry is not caught in the door, as this may cause a water leak.

• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
Remove any remaining detergent, as they may cause a water leak.

• Do not wash waterproof items.

2. Close the door until it latches.

3. Turn the power on.

4. Add detergent and additives to the dispenser drawer.

5. Select the appropriate cycle and options for the load.

The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.

6. Press the Start/Pause button.

WARNING

18_ washing a load of laundry

USING THE CONTROL PANEL

A

part indicates the washing process: (Wash)- (Rinse)- (Spin).

DIGITAL GRAPHIC
DISPLAY

Displays the remaining wash cycle time, all cycle information, and error
messages.

FUZZY CONTROL
DIAL

Select the tumble pattern and spin speed for the cycle.

For detailed information, refer to “Washing clothes using the Fuzzy
Control dial”.

Standard - For averagely or lightly soiled cotton, bed linen, table linen,
underwear, towels, shirts, etc.

Super Quick - For lightly soiled garments that you require quickly.
Intensive - Select the pattern when the laundry is heavily soiled and

needs to be washed intensively. The cycle time is increased for each
cycle.
Delicates - For sheer fabrics, brassieres, lingerie, dresses, shirts and
blouses. For best results, use liquid detergent.
Wool - Only for machine-washable wool. A load should be less than 2.0
kg.

Single Wash - It’s used to wash clothes not heavily stained.
Single Rinse - Use for a load that needs rinsing only or to add rinse-

added fabric softener to a load.

Single Spin - Performs an additional spin cycle to remove more water.
Drain - Just drain the water from washing machine without spinning.
Drum Clean - To keep the drum clean, a sanitization is needed at least

every one to three months.

• The default wash temperature is 60 ˚C.

• The default spin speed is the maximum speed.

• The Function button cannot be used at this time. But you can use

Delay function if necessary.

Drum Clean Tips:
The drum must be keep clean all the time. After long time using,
many kinds of bacteria from water and air would adhere to the
drum in the form of besmirch, which does harm to your family’s
health. So please use the Drum Clean function once every one to
three months, to keep the drum always under a clean and healthful
condition for using.

washing a load of laundry

5

4

3

6

8

9

7

10

1

2

1

2

A

washing a load of laundry _19

02 WASHING A LOAD OF LAUNDRY

HIGH LEVEL
SELECTION BUTTON

When you have a large load of laundry, you can select High Level for a
better washing performance.

• High Level is available with program of Standard, Intensive, Super

Quick, Delicate, Wool and Single Wash.

DELAY

SELECTION

BUTTON

Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increment).
The hour displayed indicates the time when the wash cycle will be
finished.

TEMPERATURE
SELECTION BUTTON

Press this button repeatedly to cycle through the available water
temperature options:
(Cold, 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).

SPIN SELECTION
BUTTON

Press the button repeatedly to cycle through the available speeds for the
spin cycle.

WF8600NG

All Lamps Turn Off,

, 400, 800, 1000 rpm

“No spin ” - The laundry remains in the drum and no spin cycle is
performed after the final drain.

FUNCTION
SELECTION BUTTON

Press this button repeatedly to cycle through the wash options:
(Rinse Hold)  (Rinse+)  (Pre Wash)  (Rinse Hold) + (Rinse+) 
(Rinse Hold) + (Pre Wash)  (Rinse+) + (Pre Wash)  (Rinse Hold)+
(Rinse+) + (Pre Wash)
 off
“Rinse Hold” : The laundry remains soaking in the final rinse water.

• It’s available only with program of Standard, Super Quick,
Intensive, Delicate, Wool and Single Rinse.

“Rinse+”: Your machine will run through an additional rinsing cycle. The
washing duration will be prolonged accordingly.

• It’s available only with program of Standard, Intensive, and Single
Rinse.

“Pre Wash”: For particularly dirty clothes, you can use Pre Wash to run
a short cycle of washing and spinning before the main wash, in order to
disintegrate the headachy besmirch.

• It’s available only with program of Standard and Intensive.

ENZYME SELECTION
BUTTON

Press this button to select Enzyme function. It can keep the wash
temperature 40~95 ˚C to make the best condition for wash. It cannot be
used when temperature is below 40 ˚C.

• It’s available only with program of Standard, Intensive, and Single
Rinse(40 ˚C).

START/PAUSE
SELECTION BUTTON

Press to pause and restart a cycle.

POWER BUTTON

Press it once to turn your washing machine on, press it again to turn
your washing machine off.
If the washing machine is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.

3

4

6

7

8

9

10

5

20_ washing a load of laundry

Child lock

The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen
can’t be changed.

Activating/Deactivating

If you want to activate or deactivate the Child Lock function,
press the Temperature

and Spin buttons at the same time

for 2 seconds. “Child Lock ” will be lit when this feature is
activated.

When the Child Lock function is activated, only the
Power button works. The Child Lock function remains
on even after the power is turned on and off or after the
disconnecting and reconnecting the power cord.

Sound off

The Sound Off function can be selected during all courses. When this function is selected, sound
is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is
retained.

Activating/Deactivating

If you want to activate or deactivate the Sound Off function,
press the

Function and Enzyme buttons at the same time for

2 seconds. The “Sound Off ” will be lit when this feature is
activated.

Delay end

You can set the washing machine to fi nish your wash automatically at a later time, choosing a
delay of between 3 to 19 hours (in 1 hour increment). The hour displayed indicates the time at
which the wash will be fi nished.

1. Manually or automatically set your washing machine according to the type of laundry you are

washing.

2. Press the Delay End button repeatedly until the delay time is set.

When using delay function, if your selected washing cycle needs more than 3 hours, you
should choose a delay time more than 3 hours.

3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will

begin counting down until it reaches the set time.

4. To cancel a Delay End function, press the Power button and then turn the washing machine

on again.

washing a load of laundry

2 SEC.

2 SEC.

washing a load of laundry _21

02 WASHING A LOAD OF LAUNDRY

Washing clothes using fuzzy logic

Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Logic”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.

1. Turn on your sink’s water tap.

2. Press the Power button.

3. Open the door.

4. Load the articles one at a time loosely into the drum, without overfilling it.

5. Close the door.

6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate

compartments.

Pre-wash is only available when selecting the Standard

and Intensive cycles. It is only

necessary if your clothing is heavily soiled.

7. Use the Fuzzy Control dial to select the appropriate cycle according to the type of material:

Standard, Super Quick, Intensive, Delicate, Wool, Drum Clean, Drain, Single Spin, Single
Rinse, Single Wash.
The relevant indicators will illuminate on the control panel.

8. At this time, you can control the wash temperature, the spinning speed, and the delay time

by pressing the appropriate option button.

9. Press the Start/Pause button and the wash will begin. The process indicator will light up

and the remaining time for the cycle will appear in the display.

Pause Option

Within 5 minutes of starting a wash, it is possible to add/remove laundry items.

1. Press the Start/Pause button to unlock the door.

The door cannot be opened when the water is too HOT or the water level is too HIGH.

2. After closing the door, press the Start/Pause button to restart the wash.

When the cycle is finished:

After the total cycle has finished, the power will turn off automatically.

1. Open the door.

2. Remove laundry.