Samsung WF6702N1W User Manual

WF6704N1/WF6702N1 WF6700N1/WF6708N1 WF6604N1/WF6602N1 WF6600N1/WF6608N1 WF6522N1/WF6520N1 WF6528N1/WF6452N1 WF6450N1/WF6458N1 WF6350N1/WF6358N1

Washing Machine

user manual

imagine the possibilities

Thank you for purchasing a Samsung product. To receive a more complete service,

please register your product at

www.samsung.com/global/register

2_ Safety information

safety information

Throughout this manual, you’ll see Warning and Caution notes. These warnings, cautions, and the important safety instructions that follow do

not cover all possible conditions and situations that may occur. It’s your resposibility to use common sense, caution, and care when installing,

maintaining, and operation your washer. Samsung is not liable for damages resulting from improper use.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual means:

Hazards or unsafe practices that may result in severe personal injury or

WARNING

CAUTION

BEFORE USING THE APPLIANCE

death.

Hazards or unsafe practices that may result in minor personal injury or property damage.

To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions:

Packing materials can be dangerous to children; keep all packing material (plastic bags, polystyrene, etc.) well out of the reach of children.

CAUTION

The appliance is designed for home use only.

Make sure that water and electrical connections are made by qualified technicians, observing the manufacturer’s instructions (see “Installing the Washing Machine”) and local safety regulations.

All packaging and shipping bolts must be removed before the appliance is used. Serious damage may occur if they are not removed. See “Removing the shipping bolts”.

Before washing clothes for the first time, you must run a complete cycle without clothes. See “Washing for the first time”.

SAFETY INSTRUCTIONS

Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet or set the (On/Off ) button to Off.

WARNING

Make sure that the pockets of all clothing to be washed are empty. Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance.

Always unplug the appliance and turn off the water after use.

Before you open the door of the appliance, check that the water has drained. Do not open the door if you can still see water.

Pets and small children may climb into the appliance. Check the appliance before each use.

Safety information _3

The glass door becomes very hot during the washing cycle. Keep children away from the appliance while it is in use.

Do not attempt to repair the appliance yourself. Repairs made by inexperienced or unqualified persons may cause injury and/or make more serious repairs to the appliance necessary.

If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.

This appliance should only be serviced by an authorized service center, and only genuine spare parts should be used.

This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance.

This appliance has to be connected to the plug endurable to proper power consumption.

This appliance has to be positioned so that the plug is accessible after installation.

Do not use processed water containing oil, cream or lotion, which is usually found in skincare shops or massage clinics.

• Otherwise this will cause the packing to be deformed, which causes a malfunction or water leak.

A stainless washing tube does not usually rust. However if some metal such as a hair pin is left in the tube for an extended time, the tube could rust.

• Do not leave water or bleach containing chlorine in the tube for an extended period of time.

• Do not regularly use or leave water containing iron in the tube for an extended period of time.

• If rust starts appearing on the surface of the tube, apply a cleansing agent (neutral) to the surface and use a sponge or soft cloth to clean it. (Under no circumstances use a metal brush)

For washing machines with ventilation openings in the base, that a carpet must not obstruct the openings.

Use the new hose-sets and old hose-sets should not be reused.

contents

INSTALLING THE WASHING

MACHINE

WASHING A LOAD OF LAUNDRY

MAINTAINING THE WASHING

MACHINE

TROUBLESHOOTING

5 Unpacking the Washing Machine

5 Overview of the washing machine

5 Selecting a location

6 Adjusting the leveling feet

6 Removing the shipping bolts

6 Connecting the water supply hose

6 Positioning the drain hose

7 Plugging in the machine

9 Washing for the first time

9 Putting detergent in the washing machine:

10 Washing clothes manually

10 Selecting options

11 Washing tips and hints

12 Repairing a frozen washing machine

12 Cleaning the exterior

12 Cleaning the debris filter

12 Cleaning the water hose mesh filter

13 Problems and solutions

13 Understanding error messages

4_ Contents

PROGRAMME CHART

APPENDIX

14 Programme chart

15 Fabric care chart

15 Electrical warnings

15 Protecting the environment

16 Declaration of conformity

16 Specification

Installing the washing machine _5

installing the washing machine

UNPACKING THE WASHING MACHINE

Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the items shown below. If the washing machine was damaged during shipping or you do not have all of the items, contact your Samsung dealer immediately.

OVERVIEW OF THE WASHING MACHINE

Cover top

Detergent drawer

Drain Hose

Control panel

Door

Plug

01 Installing the washing machine

Wrench Cold Hot (option)

Water supply hose

SELECTING A LOCATION

Before you install the washing machine, select a location with the following characteristics:

• A hard, level surface (if the surface is uneven, see “Adjusting the leveling feet,” below)

• Away from direct sunlight.

• Adequate ventilation

• Room temperature that will not fall below 0 ˚C

• Away from sources of heat such as coal or gas Make sure that the washing machine does

not stand on its power cord. Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Base cover Adjustable feet

Hose guide Bolt hole covers

6_ Installing the washing machine

installing the washing machine

C rp

Fuzzy control

Temp Spin Delay Start Function

Door open

Powe

Spin

Check

Remaining Ti

Delay Star

Rins

Pre-wash

Eco

Speed

Delicate

Synthetic

tton

START PAUS

12:00

ADJUSTING THE LEVELING FEET

If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):

1. Loosen the leg bolt by turning it with your hand until it is at the desired height.

2. Tighten the locking nut by turning it with the wrench.

• Place the washer on a sturdy, flat surface.

If the washer is placed an uneven or weak surface, noise or vibration occurs. (Only a 1 degrees angle is allowed.)

REMOVING THE SHIPPING BOLTS

Before using the washing machine, you must remove all of the shipping bolts from the back of the unit. To remove the bolts:

1. Loosen all bolts with the wrench before removing them.

2. Take each bolt head and pull it through the wide part of the

hole. Repeat for each bolt.

3. Fill the holes with the supplied plastic covers.

4. Keep the shipping bolts for future use.

CONNECTING THE WATER SUPPLY HOSE

The water supply hose must be connected to the washing machine at one end and to the water faucet at the other.

Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the hose with a longer, high pressure hose.

To connect the water supply hose:

1. Take the L-shaped arm fitting for the cold water supply hose

and connect to the cold water supply intake on the back of the machine. Tighten by hand.

2. Connect the other end of the cold water supply hose to your sink’s cold water faucet and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting.

POSITIONING THE DRAIN HOSE

The end of the drain hose may be positioned in three ways:

Over the edge of a sink

The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the faucet with a piece of string to prevent the drain hose from moving.

+ 14 hidden pages