Samsung WF457ARGSWR User Manual

Washing Machine

user manual

WF457ARG*

This manual is made with 100% recycled paper.

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service or accessory

parts, please register your product at or contact

www.samsung.com/register

1-800-SAMSUNG (726-7864)

WF457ARG-03153A-04_EN.indd 1WF457ARG-03153A-04_EN.indd 1 2012-08-31  12:30:102012-08-31  12:30:10

Key features of your new Smart PowerFoam™ washer

• The Largest Capacity

Samsung’s extra-large capacity laundry machine can wash a full set of your Bedding, PLUS a kingsize comforter or up to 32 bath towels in a single load. Since you don’t have to do as many loads, you save time, money, water and energy.

• 8” LCD Touch Screen Display

The brilliant 8” Color LCD Touch Screen displays cycle information, settings, options, and more. The easy-to-use interface allows you to scroll through all wash cycles with the slightest touch.

• Smart Control

Samsung’s innovative Smart Control technology enables you to control your washer through personal technology devices such as smart phones. You don’t have to be on standby until the cycle ends. Smart Control allows you to monitor the washing process and lets you know when the cycle is complete.

• Smart Care

Samsung’s Smart Care, an automatic error-monitoring system, detects and diagnoses problems at an early stage and provides a quick and easy solution through the LCD screen. With the innovative Smart Control technology, you can also be alerted via your smart phone when a problem occurs.

• PowerFoam™

Samsung’s e ective PowerForm delivers improved cleanliness with advanced fabric care. PowerFoam allows detergent to disperse evenly and penetrate fabrics faster and deeper.

• SpeedSpray

Samsung’s new SpeedSpray technology saves you up to 25%* more time when doing laundry by shortening the wash times while still keeping all segments of the washing process and getting your clothes clean.

*Based on 8 pounds loads, Normal cycle (under Normal Soil level without any options), on previous and existing 4.3 cu.ft. Samsung front loading washers released until 2011 without SpeedSpray.

**SpeedSpray performs in Normal, Bedding PLUS, Deep Steam, Stain Away and Eco Cold cycle and the saving time may vary by cycles and various load and option compositions.

• VRTplus™ (Vibration Reduction Technology)

This Samsung washer minimizies noise and vibrations with dual 3D vibration sensors and smart control technology, ensuring a quiet operation.

• Deep Steam

The Deep Steam feature boosts cleaning performance and loosens grime and dirt, remove thus providing a superior cleaning result.

• Pure Cycle™ (Tub Cleaning cycle)

Clean your drum with a single button! This Pure Cycle is specially designed to remove detergent residue and dirt buildup in the tub, diaphragm and on the door glass without the need for special chemical detergents.

2_ Key features of your new Smart PowerFoam™ washer

WF457ARG-03153A-04_EN.indd Sec9:2WF457ARG-03153A-04_EN.indd Sec9:2 2012-08-31  12:30:182012-08-31  12:30:18

• Diamond Drum™

Takes gentle care of your fabrics. With inside holes 36% smaller than those of conventional drums, the diamond drum prevents fabrics from sticking out through the holes and consequently being damaged.

• DD Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates a higher spin speed of 1,300 rpm for a more e ective, quieter operation. The washer also has fewer moving parts, meaning fewer repairs.

• Sanitize

When you select the NSF certiﬁ ed Sanitize cycle, the water is heated to an extra high temperature and removes 99.9% of certain bacteria typically found on clothing, bedding or towels. This certiﬁ cation is awarded by NSF International, an independent third-party testing and certiﬁ cation organization.

Please check the garment care label to avoid garment damage. Only sanitizing cycles have been designed to meet the requirements of this protocol for sanitization e cacy.

NSF Protocol P172 Sanitization Performance of Residential and Commercial, Family-Sized Clothes Washers

• Pedestal with Storage Drawers (Model No : WE357*)

An optional 15” pedestal is available to raise the washer for easier loading and unloading. It also o ers a built-in storage drawer that can hold a 100 oz. bottle of detergent

• Stacking (Model No : SK-5A/XAA)

Samsung washers and dryers can be stacked to maximize usable space. An optional stacking kit is available for purchase from your Samsung retailer.

Key features of your new Smart PowerFoam™ washer _3

WF457ARG-03153A-04_EN.indd Sec9:3WF457ARG-03153A-04_EN.indd Sec9:3 2012-08-31  12:30:182012-08-31  12:30:18

Safety information

Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many beneﬁ ts and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

The Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

Hazards or unsafe practices that may result in severe personal injury

or death.

WARNING

CAUTION

To reduce the risk of ﬁ re, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

Hazards or unsafe practices that may result in minor personal injury

or property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

These warning signs are here to prevent injury to you and others. Please follow them explicitly. After reading this section, keep it in a safe place for future reference.

SAVE THESE INSTRUCTIONS

4_ Safety instructions

WF457ARG-03153A-04_EN.indd Sec11:4WF457ARG-03153A-04_EN.indd Sec11:4 2012-08-31  12:30:192012-08-31  12:30:19

WARNING

To reduce the risk of ﬁ re, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or

spotted with gasoline, dry-cleaning solvents, other ﬂ ammable or explosive substances as they give o vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the washing

or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless speciﬁ cally

recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other ﬂ ammable or explosive substances to

the wash water. These substances give o vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not

been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washer or combination washer-dryer, turn on all hot water faucets and let the water ﬂ ow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is ﬂ ammable, do not smoke or use an open ﬂ ame during this time.

State of California Proposition 65 Warnings:

WARNING

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of potential exposure to such substances. This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, and carbon monoxide.

SAVE THESE INSTRUCTIONS

Safety instructions _5

WF457ARG-03153A-04_EN.indd Sec11:5WF457ARG-03153A-04_EN.indd Sec11:5 2012-08-31  12:30:192012-08-31  12:30:19

Safety instructions

CRITICAL INSTALLATION WARNINGS

WARNING

Plug the power cord into an AC 120 V / 60 Hz / 15 A wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.

- Sharing a wall socket with other appliances, using a power strip, or using an extension cord may result in electric shock or ﬁ re.

- Do not use an electric transformer. It may result in electric shock or ﬁ re.

- Ensure that the voltage, frequency, and amperage provided at the wall socket match the power speciﬁ cations of the product.

The installation of this appliance must be performed by a qualiﬁ ed technician or service company.

- Failing to do so may result in electric shock, ﬁ re, an explosion, problems with the product, or injury.

Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.

- Unplug the power plug and clean it with a dry cloth.

- Failing to do so may result in electric shock or ﬁ re.

Plug the power plug into the wall socket in the right direction so that the cord runs towards the ﬂ oor.

- If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or ﬁ re.

This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

- Improper grounding may result in electric shock, ﬁ re, an explosion, or problems with the product.

- Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.

Do not install this appliance near a heater or inﬂ ammable material. Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak.

- This may result in electric shock or ﬁ re.

Plug the power plug into the wall socket ﬁ rmly. Do not use a damaged power plug, damaged power cord, or loose wall socket.

- This may result in electric shock or ﬁ re.

Do not pull or excessively bend the power cord. Do not twist or tie the power cord. Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.

- This may result in electric shock or ﬁ re.

SAVE THESE INSTRUCTIONS

6_ Safety instructions

WF457ARG-03153A-04_EN.indd Sec11:6WF457ARG-03153A-04_EN.indd Sec11:6 2012-08-31  12:30:192012-08-31  12:30:19

Do not pull the power cord when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failing to do so may result in electric shock or ﬁ re.

If the power plug or power cord is damaged, contact your nearest service center.

INSTALLATION CAUTIONS

CAUTION

Position the appliance so that the power plug is easily accessible.

- Failing to do so may result in electric shock or ﬁ re due to electric leakage. Install your appliance on a level and hard ﬂ oor that can support its weight.

- Failing to do so may result in abnormal vibrations, noise, or problems with the product.

Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm.

- Failing to do so may result in electric shock or ﬁ re.

CRITICAL USAGE WARNINGS

WARNING

If the appliance is ﬂ ooded, cut the power immediately and contact your nearest service center. If the appliance emits a strange noise, a burning smell, or smoke,, unplug the power plug immediately and contact your nearest service center.

- Failing to do so may result in electric shock or ﬁ re. In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without

touching the power plug. Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or ﬁ re. Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other ﬂ ammable or explosive substances.

- This may result in electric shock, ﬁ re or an explosion. Do not open the washer door by force while the washer is operating (high-temperature

washing/drying/spinning).

- Water ﬂ owing out of the washer may result in burns or cause the ﬂ oor to be slippery. This may result in injury.

- Opening the door by force may result in damage to the product or personal injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it.

Do not insert your hand under the washer.

- This may result in injury.

SAVE THESE INSTRUCTIONS

Safety instructions _7

WF457ARG-03153A-04_EN.indd Sec11:7WF457ARG-03153A-04_EN.indd Sec11:7 2012-08-31  12:30:192012-08-31  12:30:19

Safety instructions

Do not touch the power plug with wet hands.

- This may result in electric shock. Do not turn the appliance o by unplugging the power plug while an operation is in

progress.

- Plugging the power plug into the wall socket again may cause a spark and result in electric shock or ﬁ re.

Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.

- If a child places a bag over its head, it may result in su ocation.

Do not let children or inﬁ rm persons use this washer unsupervised.

- Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

- This may result in injury.

Make sure the detergent drawer is closed before you put laundry into the washer or remove laundry from the washer.

- If the detergent drawer is open, you could strike the drawer with your head and injure yourself.

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.

- If you need to repair or reinstall the appliance, contact your nearest service center.

- Failing to do so may result in electric shock, ﬁ re, problems with the product, or injury.

If water has enters the appliance anywhere but the drum, unplug the power plug and contact your nearest service center.

- Failing to do so may result in electric shock or ﬁ re.

When the water supply hose comes loose from the faucet and ﬂ oods the appliance, unplug the power plug.

- Failing to do so may result in electric shock or ﬁ re.

If any foreign substance enters the appliance, unplug the power plug and contact you nearest service center.

- Failing to do so may result in electric shock or ﬁ re.

USAGE CAUTIONS

CAUTION

If the the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp, soft cloth.

- Failing to do so may result in discoloration, deformation, damage or rust.

If struck hard, the front glass can break. Take care when using the washer.

- If the glass is broken, it may result in injury.

SAVE THESE INSTRUCTIONS

8_ Safety instructions

WF457ARG-03153A-04_EN.indd Sec11:8WF457ARG-03153A-04_EN.indd Sec11:8 2012-08-31  12:30:192012-08-31  12:30:19

After a water supply failure or when reconnecting the water supply hose, open the faucet slowly. Open the faucet slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage.

If a drain error occurs during an operation, check if there is a drainage problem.

- If the washer is used when it is ﬂ ooded because of a drainage problem,, it may result in electric shock or ﬁ re due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the door.

- If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in water leakage.

Ensure that the faucet is turned o when the washer is not being used.

- Ensure that the screw on the water supply hose connector is ﬁ rmly connected to the faucet and properly tightened.

- Failing to do so may result in property damage or injury.

Take care that the Rubber Seal and the Front Door Glass are not contaminated by a foreign substance (e.g. waste, thread, hair, etc.)

- If a foreign substance is caught in the door or the door is not completely closed, it may cause water leakage.

Open the faucet and check if the water supply hose connector is ﬁ rmly tightened and that there is no water leaking before using the product.

- If the water supply hose connectors are loose, it may result in water leakage.

The product you have purchased is designed for domestic use only.

The use for business purposes qualiﬁ es as product misuse. In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.

If the wash is not performed and the laundry is left for a period of time after adding detergent or applying stain remover or pre-treatment onto the laundry, the laundry may be discolored.

Select the recommended cycle and temperature on the basis of the laundry items, sort the laundry by color on the basis of its colorfastness and select the appropriate cycle.

Make sure that foreign objects such as pins, buttons and coins are removed from clothing items when adding laundry into the washer. Wash dirty laundry separately from relatively clean items and wash fragile items separately from tougher textiles.

If an item is stained, wash it as fast as possible. Use stain remover or detergent only after testing the colorfastness of the item by applying a small quantity to an inside seam.

SAVE THESE INSTRUCTIONS

Safety instructions _9

WF457ARG-03153A-04_EN.indd Sec11:9WF457ARG-03153A-04_EN.indd Sec11:9 2012-08-31  12:30:192012-08-31  12:30:19

Safety instructions

Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, ﬁ re, problems with the product, or injury. Do not operate the appliance with wet hands.

- This may result in electric shock. Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also result in electric shock, ﬁ re or problems with the product.

Do not place an object that generates a electromagnetic ﬁ eld near the washer.

- This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water.

- This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats or clothing (*).

- Do not wash thick, hard mats even if the washer mark is on the care label.

- This may result in injury or damage to the washer, walls, ﬂ oor or clothing due to abnormal vibrations.

* Woolen bedding, rain covers, ﬁ shing vests, ski pants, sleeping bags, diaper covers,

sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed.

- This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot.

- This may result in burns.

Do not insert your hand into the detergent dispenser after opening it.

- This may result in injury as your hand may be caught.

Do not place any non-laundry objects, such as shoes, food waste, or animals into the washer.

- This can cause abnormal vibrations that can damage the washer, and, in the case of pets, cause severe injury or death.

Do not press the buttons using sharp objects such as pins, knifes, ﬁ ngernails, etc.

- This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods of time.

- This may cause the tub to rust.

- If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface and use a sponge to clean it. Never use a metal brush.

SAVE THESE INSTRUCTIONS

10_ Safety instructions

WF457ARG-03153A-04_EN.indd Sec11:10WF457ARG-03153A-04_EN.indd Sec11:10 2012-08-31  12:30:192012-08-31  12:30:19

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.

- This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil.

Do not use hot water from water cooling/heating devices.

- This may result in problems with the washer.

Do not use natural hand-washing soap in the washer.

- If it hardens and accumulates inside the washer, it may result in problems with the product, discoloration, rust or bad odors.

Do not wash large laundry items such as bedding in the washing net.

- Failing to do so may result in injury due to abnormal vibrations.

- Place smaller items, such as lace socks and lingerie in the washing net.

Do not use hardened detergent.

- If it accumulates inside the washer, it may cause water leakage.

Do not wash throw rugs or doormats.

- If you wash throw rugs or doormats, sand will accumulate inside the washer. It may result in errors such as no draining.

Take care that children’s ﬁ ngers are not caught in the door when closing it.

- This may result in injury.

CRITICAL CLEANING INSTRUCTIONS

WARNING

Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance.

- This may result in discoloration, deformation, damage, electric shock or ﬁ re.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failing to do so may result in electric shock or ﬁ re.

SAVE THESE INSTRUCTIONS

Safety instructions _11

WF457ARG-03153A-04_EN.indd Sec11:11WF457ARG-03153A-04_EN.indd Sec11:11 2012-08-31  12:30:192012-08-31  12:30:19

Safety instructions

REGULATORY NOTICE

1. FCC Notice

FCC CAUTION:

CAUTION

Any changes or modiﬁ cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received including interference that cause

undesired operation.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.

FCC STATEMENT:

This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a di erent circuit from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

SAVE THESE INSTRUCTIONS

12_ Safety instructions

WF457ARG-03153A-04_EN.indd Sec11:12WF457ARG-03153A-04_EN.indd Sec11:12 2012-08-31  12:30:192012-08-31  12:30:19

2. IC Notice

The term “IC” before the radio certiﬁ cation number only signiﬁ es that Industry Canada technical

speciﬁ cations were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.

IC RADIATION EXPOSURE STATEMENT:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Open Source License Notice

This device uses open source software. Open Source Licenses are available on the product menu.

Tap “Settings > Network > Software Update > Legal Information” on the device for more details.

SAVE THESE INSTRUCTIONS

Safety instructions _13

WF457ARG-03153A-04_EN.indd Sec11:13WF457ARG-03153A-04_EN.indd Sec11:13 2012-08-31  12:30:192012-08-31  12:30:19

Contents

INSTALLING YOUR WASHER

WASHING A LOAD OF LAUNDRY

16 Unpacking your washer 16 Overview of your washer 17 Meeting the installation requirements

17 Electrical supply and grounding 17 Water supply 18 Drain 18 Flooring 18 Surrounding temperature 18 Alcove or closet installation

20 Installing your washer

20 Installation ﬂ ow chart

25 Setting up your washer for the ﬁ rst time

25 Choosing the language 25 Setting the current date 26 Setting the current time 26 Setting the Automatic Update

27 Washing for the ﬁ rst time 27 Basic instructions 28 Using the control panel

29 Available cycles 30 Specialty Cycles 30 Available options 31 Available actions 33 Washing your laundry using the Cycle

Selection screen 35 Using the My Cycle function 36 Using the Delay Start function 37 Using the Child Lock function 38 Turning the Light On and O 38 Controlling the sound volume 39 Controlling the brightness level 40 Using the Stain Guide 41 Viewing the Energy E ciency 41 Using the Smart Grid

43 Detergent use 43 Using the detergent drawer

43 Automatic dispenser 43 Detergent compartment 44 Pre wash compartment 44 Bleach compartment 44 Fabric softener compartment

14_ Contents

WF457ARG-03153A-04_EN.indd 14WF457ARG-03153A-04_EN.indd 14 2012-08-31  12:30:192012-08-31  12:30:19

USING YOUR MOBILE PHONE

45 Conﬁ guring your washer’s network settings

and connecting to your network

45 Conﬁ guring the IP address settings 46 Connecting your washer to the network

46 Turning on your washer’s Wi-Fi networking

function

47 How to update the software 48 Downloading and running the mobile app,

Samsung Smart Washer/Dryer App

50 Using the mobile App

50 Disconnecting the connection 51 Starting a new wash 52 Registering your washer

54 Overview for Wi-Fi Settings and AP

Connection

MAINTAINING YOUR WASHER

TROUBLESHOOTING

APPENDIX

55 Cleaning the exterior 55 Cleaning the interior 55 Cleaning the dispensers 55 Storing your washer 56 Cleaning the debris ﬁ lter 57 Cleaning the door seal/bellow 57 Preserving the top cover and the front frame 58 Pure Cycle

59 Check these points if your washer… 61 Information codes 63 Network Setup Q&A

65 Fabric care chart 66 Cycle chart 68 Helping the environment 68 Declaration of conformity 68 Speciﬁ cations

Contents _15

WF457ARG-03153A-04_EN.indd 15WF457ARG-03153A-04_EN.indd 15 2012-08-31  12:30:192012-08-31  12:30:19

Installing your washer

UNPACKING YOUR WASHER

Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown below. If your washer was damaged during shipping, or you do not have all the items, contact 1-800-SAMSUNG (726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

The packaging materials can be dangerous to children; keep all packaging material (plastic bags, polystyrene, etc.) well out of the reach of children.

WARNING

OVERVIEW OF YOUR WASHER

Detergent drawer

Control panel

Debris ﬁ lter

Drain tube

Filter cover

Parts supplied

Wrench Bolt hole covers Water supply hoses

Door

Tub

Hot water supply hose

Cold water supply hose

Drain Hose

Adjustable legs

Hose guide User manual Plastic zip hose tie

Tools needed

Pliers Flat screwdriver

16_ Installing your washer

WF457ARG-03153A-04_EN.indd 16WF457ARG-03153A-04_EN.indd 16 2012-08-31  12:30:192012-08-31  12:30:19

MEETING THE INSTALLATION REQUIREMENTS

Electrical supply and grounding

Never use an extension cord. Use only the power cord that comes with your washer.

WARNING

When preparing the installation, ensure that your power supply o ers:

• An AC 120 V / 60 Hz / 15-amp fuse or circuit breaker

• An individual branch circuit dedicated to your washer Your washer must be grounded. If your washer malfunctions or breaks down, grounding will

reduce the risk of electric shock by providing a path of least resistance for the electric current. Your washer comes with a power cord that has a three-prong grounding plug for use in a

properly installed and grounded outlet.

Never connect the ground wire to plastic plumbing lines, gas lines or hot water pipes.

WARNING

Improperly connecting the equipment-grounding conductor can result in electric shock. Check with a qualiﬁ ed electrician or serviceman if you are unsure if the washer is properly

WARNING

grounded.

Do not modify the plug provided with the washer. If it does not ﬁ t the outlet, have a proper outlet installed by a qualiﬁ ed electrician.

CAUTION

Important safety precautions

To prevent unnecessary risk of ﬁ re, electrical shock or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.

CAUTION

70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.

Water supply

Your washer will ﬁ ll properly when your water pressure is between 20 psi (137 kPa) to 116 psi (800 kPa). A water pressure less than 20 psi (137 kPa) may cause a water valve failure and not allow the water valve to shut o completely. Alternatively, it may take the washer than allowed by the controls, causing your washer to turn o . (A ﬁ ll-time limit has been built into the controls, designed to prevent overﬂ ows or ﬂ ooding if an internal hose becomes loose.)

The water taps must be within 4 feet (122 cm) of the back of your washer for the provided water supply hoses to reach your washer.

Most plumbing supply stores sell water supply hoses of various lengths up to 10 feet (305cm) long.

You can reduce the risk of leaks and water damage by:

• Making water taps easily accessible.

• Turning o water taps when the washer is not in use.

• Periodically checking the water supply hose ﬁ ttings for leaks. Before using your washer for the ﬁ rst time, check all connections at the water valve and

taps for leaks.

WARNING

Using hard water or bad quality water may cause the water supply valve to operate abnormally.

CAUTION

01 INSTALLING YOUR WASHER

Installing your washer _17

WF457ARG-03153A-04_EN.indd 17WF457ARG-03153A-04_EN.indd 17 2012-08-31  12:30:202012-08-31  12:30:20

Installing your washer

Drain

Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, your washer must be installed on a solidly constructed ﬂ oor. Wooden ﬂ oors may need to be reinforced to minimize vibrations and/or unbalanced loads. Carpeting and soft tile surfaces are contributing factors to vibrations and the tendency for your washer to move slightly during the spin cycle.

Never install your washer on a platform or poorly supported structure.

WARNING

Surrounding temperature

Do not install your washer in areas where water may freeze, since your washer always retain some water in the water valve, pump and hose areas. Frozen water in the lines can cause damage to the belts, the pump and other components.

Alcove or closet installation

To operate safely and properly, your new washer requires the following minimum clearances:

Sides 1 in / 25 mm Rear 5.9 in / 150mm Top 17 in / 432 mm Front 2 in / 51 mm

If both the washer and a dryer are installed together, the front of the alcove or closet must have an unobstructed air opening of at least 72 in² (465 cm²). Your washer by itself does not require a speciﬁ c air opening.

1 in.

(2.5 cm)

27 in.

(68.6 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

1 in.

(2.5 cm)

2 in.

(5 cm)

17 in.

(43.2 cm)

34.1 in.

(86.5 cm)

5.9 in.

(15 cm)

Recessed area Side view - closet or conﬁ ned area

18_ Installing your washer

WF457ARG-03153A-04_EN.indd 18WF457ARG-03153A-04_EN.indd 18 2012-08-31  12:30:202012-08-31  12:30:20

When installing your washer under the counter (washer only)

39.6 in.

(100.6 cm)

01 INSTALLING YOUR WASHER

1 in.

(2.5 cm)

27 in.

(68.6 cm)

1 in.

(2.5 cm)

When installing your washer with an optional pedestal base or stacking kit

Required dimensions for an installation with a pedestal

51.2 in. (130 cm) to clear open door

39 in.

(99 cm)

53.6 in.

(136.2 cm)

48 in.² *

(310 cm²)

24 in.² *

(155 cm²)

34.1 in.

(86.5 cm)

Closet or Door

5.9 in.

(15 cm)

(7.6 cm)

3 in.

27 in.

(68.6 cm)

5 in.

(12.7 cm)

Required dimensions for an

installation with a stacking kit

6 in. *

(15.2 cm)

78 in.

(198 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

3 in.

1 in.

34.1 in.

(7.6 cm)

(2.5 cm)

(86.5 cm)

5.9 in.** (15 cm)

It is not recommended to stack DV457* on WF457. (it might be hard to control dryer LCD because of the viewing angle.)

* Required spacing ** An external exhaust elbow requires additional space.

Installing your washer _19

WF457ARG-03153A-04_EN.indd 19WF457ARG-03153A-04_EN.indd 19 2012-08-31  12:30:202012-08-31  12:30:20

Installing your washer

INSTALLING YOUR WASHER

Before STEP 5 is complete, do not plug the power cord into a wall socket.

CAUTION

Packaging materials can be dangerous to children; keep all packaging material (plastic bags, polystyrene, etc.) well out of the reach of children.

WARNING

Installation ﬂ ow chart

Selecting a

location

Please

check again

before steps.

Yes

Adjusting the

levelling feet

have excess vibration

Removing the shipping

bolts (*Drum only)

Does

your washer

or noise?

Connecting the water

Powering your washing

machine

Running a Calibration mode

(Refer to the following

description)

and the drain

[Running a test cycle]

Run a test cycle (Rinse+Spin) with

small amount of laundary

(about 4~5 Towels)

Finish the

installation

STEP 1 Selecting a location

Before you install the washer, make sure the location:

• Has a hard, level surface without carpeting or ﬂ ooring that may obstruct ventilation Is away from direct sunlight

• Has adequate ventilation

• Is not exposed to freezing temperatures (temperatures are never below 32 °F or 0 °C)

• Is away from heat sources such as oil or gas

• Has enough space so that the washer doesn’t stand on its power cord

STEP 2 Removing the shipping bolts

Before installing the washing machine, you must remove all shipping bolts from the back of the unit.

1. Hold the shipping bolt with your hand and pull it through

the wide section of the hole. Repeat for each shipping bolt.

2. Fill the holes with the supplied bolt hole covers.

3. Store the shipping bolts in a safe location where they can

be easily retrieved in the event that you have to move the washing machine in the future.

20_ Installing your washer

WF457ARG-03153A-04_EN.indd 20WF457ARG-03153A-04_EN.indd 20 2012-08-31  12:30:212012-08-31  12:30:21

STEP 3 Connecting the water and the drain

Connecting the water supply hose

Do not connect multiple water supply hoses. This may result in a water leakage and electric shock due to the water leakage. If the hose is too short, replace the hose with a longer,

CAUTION

high pressure hose.

1. Connect one end of the COLD water supply hose to the

COLD water supply intake at the back of the washer.

2. Tighten part (A) by hand until it is snug, then make two-

thirds of a turn with a wrench.

3. On the other end of the hose, check for one rubber washer

per hose and install each water supply hose to the faucet.

Make sure the hose with the printed word HOT is attached to the HOT faucet.

4. Tighten part (A) by hand until it is snug, then make two-

thirds of a turn with a wrench.

For the correct water use, connect both the HOT and COLD water faucets. If either or both are not connected, an “nF” (no ﬁ ll) error can occur.

After you have connected the water supply hose to the faucet, ensure that it is connected correctly by pulling the water supply hose downwards.

Check if the water supply hose is not twisted or bent. If the hose is twisted or bent, there is a danger of a

WARNING

water leakage and electric shock due to the water leakage.

5. Turn on the HOT and COLD water supply and check all

connections at the water intake and the faucet for leaks.

Cold Hot

Rubber Washer

01 INSTALLING YOUR WASHER

Installing your washer _21

WF457ARG-03153A-04_EN.indd 21WF457ARG-03153A-04_EN.indd 21 2012-08-31  12:30:212012-08-31  12:30:21

Installing your washer

Connecting the drain hose

The end of the drain hose can be positioned in three ways:

Over the edge of a wash basin

The drain hose must be placed at a height between 23.6 in (60cm) and 35.4 in (90cm). To keep the drain hose spout bent, use the supplied plastic hose guide (A). Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.

In a standpipe or laundry tub

We recommend using a 20 in (52 cm) high vertical pipe or laundry tub. It must be no shorter than 18 in (46 cm) and no longer than 96 in (245 cm).

Make sure that the connection between the drain hose and the standpipe is NOT airtight.

96” Max

18” Min

Hose retainer

Tie strap

Laundry tub

Hose retainer

Tie strap

Stand pipe

96” Max

18” Min

22_ Installing your washer

WF457ARG-03153A-04_EN.indd 22WF457ARG-03153A-04_EN.indd 22 2012-08-31  12:30:212012-08-31  12:30:21

STEP 4 Adjusting the levelling feet

When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible.

1. Slide the washing machine into position.

2. Loosen all the lock nuts with the supplied wrench.

3. Level your washing machine by turning the levelling feet in

and out as necessary by hand.

4. When your washing machine is level, tighten the locking

nuts using a wrench or ﬂ athead screwdriver.

Your washer must be level on all four sides. A carpenter’s level should be used on all four corners of your washer. It’s a good idea after the ﬁ rst dozen washes to make sure your washer is still level.

Avoid damage to the legs. Do not move the washer unless the locking nuts are fastened to the bottom of the washer.

01 INSTALLING YOUR WASHER

Installing your washer _23

WF457ARG-03153A-04_EN.indd 23WF457ARG-03153A-04_EN.indd 23 2012-08-31  12:30:212012-08-31  12:30:21

Installing your washer

STEP 5 Powering your washing machine

Plug the power cord into a wall socket, an AC 120V / 60Hz approved electrical outlet protected by a 15-amp fuse or circuit breaker. (For more information on the electrical and grounding requirements, refer to the “Electrical supply and grounding” section on page 17.)

When the power plug is connected, the Samsung logo is displayed for about 15 seconds before the screen turns o . Press the Power button to use your washer.

The process shown in this ﬁ gure is a preparation step for using your washer. It is not an indication of a failure.

STEP 6 Calibration mode

Before using Calibration mode, be sure to take all items out of the drum.

Your Samsung washing machine automatically detects the weight of the laundry. For a more accurate weight detection, please run Calibration Mode after the installation. To run Calibration Mode, follow these steps:

1. Turn on the washer.

2. Tab Settings and then Calibration Mode.

3. Remove any contents in the tub and close the

door.

4. Tab Calibration Ready

5. Press the Start/Pause button to run

Calibration Mode.

6. The drum rotates clockwise and

counterclockwise for approximately 3 minutes.

7. When Calibration Mode is ﬁ nished, the “Cycle

complete” message appears on the display and the washing machine turns o automatically. The washing machine is now ready for use.

24_ Installing your washer

WF457ARG-03153A-04_EN.indd 24WF457ARG-03153A-04_EN.indd 24 2012-08-31  12:30:222012-08-31  12:30:22

SETTING UP YOUR WASHER FOR THE FIRST TIME

When your washer is turned on for the ﬁ rst time, the intro animation is played which shows the Samsung logo and is played each time your washer is turned in the LCD panel and then you are guided through the initial setup procedures. Through this procedure you can set your preferences for use of your washer. This procedure consists of the following 5 steps:

1. Choosing your language

2. Setting the current date

3. Notiﬁ cation for setting up your mobile network

Precautions for using the LCD panel

• If you tap on the LCD screen while wearing rubber gloves, your tapping may sometimes not be recognized.

• If you tap on the LCD screen with a wet ﬁ nger, your tapping may sometimes not be recognized or other unwanted cycle or option may be selected.

• If you tap on the LCD screen while it is wet, another cycle or option may sometimes be selected.

Choosing the language

1. Tap the language you want to use for the

controls, instructions and descriptions shown on the LCD panel.

There are 4 available languages: English, Español (Spanish), Français (French) and Português (Portuguese).

2. Tap the Next button when done.

Setting the current date

01 INSTALLING YOUR WASHER

1. Tap the up and down arrows to set the date.

Tap the left and right arrows at the bottom o the screen to move to other calendar months.

2. Tap the Next button when done.

Installing your washer _25

WF457ARG-03153A-04_EN.indd 25WF457ARG-03153A-04_EN.indd 25 2012-08-31  12:30:222012-08-31  12:30:22

Installing your washer

Setting the current time

1. Set the time by tapping on the up and down

arrows.

2. Tap the Next button when done.

Setting the Automatic Update

1. The Automatic Update function allows various

updates such as performance improvements, patches and bug ﬁ xes to be installed automatically by communicating with the update server.

2. When you agree to this setting, you are

considered as having agreed to the terms and conditions for the Automatic Update function.

3. When the software is updated, some functions

provided by the previous software version may be unavailable depending on the update.

After completing the initial setup, you can access each step and change your preferences any time using the Settings control located at the bottom right of the Cycle Selection screen displayed on the LCD panel.

For example, If you want to set the time again...

1. Tap the Settings at the bottom right of the Cycle Selection screen.

2. Tap the Time & Language at the Settings screen.

3. Tap the Change button under the Time.

4. Tap the up and down arrows to change the time.

5. Tap the OK button. You can view and change the settings of the Language, Date, and Network through the same steps

above.

26_ Installing your washer

WF457ARG-03153A-04_EN.indd 26WF457ARG-03153A-04_EN.indd 26 2012-08-31  12:30:222012-08-31  12:30:22

Washing a load of laundry

With your new Samsung washer, the hardest part of doing laundry will be deciding which load to wash ﬁ rst.

To reduce the risk of ﬁ re, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

WARNING

WASHING FOR THE FIRST TIME

Before washing laundry for the ﬁ rst time, you must run a complete cycle with the washer empty.

1. Press the Power button.

2. Add a little detergent to the detergent compartment

the detergent drawer.

3. Turn on the water supply to the washer.

4. Press the Start/Pause button.

The washer runs the Normal cycle, this is the factory default cycle the washer will run until you select another cycle. The ﬁ rst empty cycle removes any water that might be left over in the machine from the manufacturer’s test run.

02 WASHING A LOAD OF LAUNDRY

Compartment Compartment Compartment

Compartment

Detergent for Prewash or Starch. Detergent for Main Wash, water softener. Bleach.

To use liquid detergent, use the liquid detergent compartment. Do not add powdered detergent to the liquid detergent box.

For additives, for example, fabric softener. Fill no higher than the lower edge (labeled MAX).

BASIC INSTRUCTIONS

Before washing laundry for the ﬁ rst time, you must run a cycle with the washer empty.

1. Press the Power button.

2. Load your laundry into the washer.

Do not overload the washer. To determine the load capacity for each type of laundry, refer to the “Cycle chart”

WARNING

section on page 66.

• Make sure that laundry is not caught in the door, as this can cause a leak.

• Washing detergent may remain in the front rubber part of the washer after a wash cycle. Remove any remaining detergent, as this can cause a leak.

• Do not touch the door glass while your washer is running as it may be hot.

• Do not open the detergent drawer or the debris ﬁ lter while your washer is running. You may be exposed to hot water or steam.

• Be sure to wash water-proofed items using the Picnic & Camping cycle.

3. Close the door until it latches.

4. Add detergent and additives to the detergent drawer.

5. Select the appropriate cycle and options on the LCD panel. The selected cycle and its

selected options light up and the estimated cycle time appears at the top right of the LCD panel.

6. Press the Start/Pause button.

Washing a load of laundry _27

WF457ARG-03153A-04_EN.indd 27WF457ARG-03153A-04_EN.indd 27 2012-08-31  12:30:232012-08-31  12:30:23

Washing a load of laundry

USING THE CONTROL PANEL

1 2

Select the cycle you want to use for your laundry. The Cycle pane contains a list of cycles that you can scroll down or up. To view more cycles, drag from

CYCLE PANE

OPTION PANE

CYCLE TIME

SECTION

ECO BAR

SECTION

ACTIONS

SECTION

the bottom to the top along the Cycle pane.

• For more information on the cycles you can select in the Cycle pane,

refer to the “Available cycles” section on page 29.

• For more information, refer to the “Washing your laundry using the Cycle Selection screen” section on page 33.

Displays the currently selected options for the selected cycle and allows you to change them.

There are four options: Temperature, Spin Speed, Soil Level and Extras.

For more information on the options you can select in the Options pane, refer to the “Available options” section on page 30.

Displays the estimated amount of time the selected cycle and its selected options will take to complete.

Displays the energy e ciency of the selected cycle by showing the estimated environmental friendliness of the selected cycle and its selected options on a scale.

Provides the following additional controls that allow you to carry out additional actions and view and conﬁ gure other settings: Smart Control, Save as My Cycles, Delay Start, Child Lock, Light, and Settings.

For more information on the additional controls you can use in the Actions section, refer to the “Available actions” section on page 31.

28_ Washing a load of laundry

WF457ARG-03153A-04_EN.indd 28WF457ARG-03153A-04_EN.indd 28 2012-08-31  12:30:232012-08-31  12:30:23

Available cycles

The preset cycles listed in the Cycle pane of the Cycle Selection screen are listed below including the Specialty Cycles.

My Cycles Shows the 3 custom or favourite cycles you saved as My Cycles. Each

Eco Cold The Eco Cold cycle is an energy saving daily care cycle for normally and

Normal The Normal Cycle is for most fabrics including cotton, linen and normally

Heavy Duty The Heavy Duty cycle is for sturdy, colorfast fabrics and heavily soiled

Perm Press The Perm Press cycle is for wash-and-wear, synthetic fabrics and lightly

Delicates/Hand Wash

Active Wear The Active Wear cycle is for exercise wear such as sports jerseys,

Bedding PLUS The Bedding PLUS cycle is for bulky items such as blankets, comforters

DEEP STEAM The DEEP STEAM cycle is for heavily soiled, colorfast garments.

Stain Away This cycle provides an outstanding stain removal performance, with the

Sanitize The Sanitize cycle is for heavily soiled, colorfast garments. This cycle

Wool The Wool cycle is for machine-washable wool. Loads should be under 8

Quick Wash The Quick Wash cycle is for lightly soiled garments that you need

Rinse + Spin The Rinse+Spin cycle is for loads that need rinsing only or when you

Spin Only The Spin Only cycle performs an additional spin cycle to remove more

Pure Cycle The Pure Cycle cleans dirt and bacteria from the drum. Regular use

My Cycle remembers the temperature, spin speed, soil level and extra cycle options you set so that you can use them easily to wash speciﬁ c laundry items.

lightly soiled laundry that uses only cold water.

soiled garments.

garments.

to normally soiled garments. The Delicates/Hand Wash cycle is for sheer fabrics, bras, lingerie (silk)

and other handwash-only fabrics. For best results, use liquid detergent.

training pants and other performance clothing.

and sheets. When you are washing bulky items, use liquid detergent.

It provides a high wash temperature and steam and cleans stains e ectively.

utmost gentle care.

heats the water to 150 °F (65.6 °C) to eliminate bacteria.

pounds. For best results, we recommend a load of 4.4 pounds (2 kg) or less.

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products, provided that the products are washed according to the instructions on the garment label and those issues by the manufacturer of this washer, M1207.

quickly.

need to add fabric softener to a load.

water.

(after every 40 washes) is recommended. No detergent or bleach is needed.

02 WASHING A LOAD OF LAUNDRY

Washing a load of laundry _29

WF457ARG-03153A-04_EN.indd 29WF457ARG-03153A-04_EN.indd 29 2012-08-31  12:30:242012-08-31  12:30:24

Washing a load of laundry

Specialty Cycles

Specialty Cycles provide 6 ready-to-use cycles to meet all your laundry needs. For laundry that goes beyond the “everyday” type of wash, Specialty Cycles provide the optimal

settings to clean all potential stains and dirt based on the type of stain.

1. Tap Specialty Cycles in the Cycle pane. 6 cycles will be displayed.

2. Select cycles.

3. Specialty Cycles provide the optimal wash settings to clean stained clothes depending on

the type of stain without setting the soil level, water temperature and other options.

Depending on the selected cycle, some settings and options are unavailable and are shown as disabled.

Adjusting the water temperature is unavailable as Specialty Cycles provide the optimal temperature setting to clean each type of stain. However, if you have heavily or lightly soiled garments, you can adjust the soil, and the Specialty Cycles will automatically adjust the water temperature, washing time and other options for the best stain removal performance.

Cooking & Dining The Cooking & Dining cycle is for most fabrics used with food or

Gardening & Yard Work

Working & Everyday

Outdoors & Travel The Outdoors & Travel cycle is for normally soiled outdoor clothing

Active Kids The Active Kids cycle is for most kids wear. This cycle removes food,

Baby Care The Baby Care cycle is for baby items including baby clothes,

cooking. This cycle removes food and cooking stains e ectively.

DO NOT use this cycle for laundry contaminated by oil/grease.

The Gardening & Yard Work cycle is for gardening clothes. This cycle removes grass, mud/dirt stains and cleans sweat and sebum e ectively.

DO NOT use this cycle for laundry contaminated by oil/grease.

The Working & Everyday cycle is for lightly soiled clothing including synthetics. This cycle removes slightly soiled ink stains and cleans daily dirt e ectively.

DO NOT use this cycle for laundry contaminated by oil/grease.

including synthetics. This cycle removes grass, mud/dirt, slightly soiled food stains and cleans sweat and make-up stains e ectively.

beverage, mud/dirt and ink/crayon stains e ectively.

underwear, pillow covers, bed sheets, cloth diapers. This cycle removes urine/feces, vomit stains etc. e ectively.

Available options

You can view the currently selected options for the selected cycle and change them in the Options pane of the Cycle Selection screen.

There are four options: Temperature, Spin speed, Soil level, and Extras.

Temperature

Tap this option to change the currently selected temperature setting. The available temperature settings are Cold, Eco Warm, Warm, Hot, and Extra Hot. However, depending on the selected cycle, some of them are unavailable and are shown as disabled.

30_ Washing a load of laundry

WF457ARG-03153A-04_EN.indd 30WF457ARG-03153A-04_EN.indd 30 2012-08-31  12:30:242012-08-31  12:30:24

+ 198 hidden pages