Samsung WF435ATGJWR/A1-0002, WF435ATGJRA/A1-0002, WF435ATGJWR/A1-0001, WF435ATGJRA/A1-0001, WF435A Series User Manual

100%

Recycled Paper

the possibilities

Thank you for purcnaslng this Samsung product. To receive more complete service or access br_

parts, please register your p_oduct at or contact

www.samsung.com/register

1-800-SAMSUNG 726-7864_

WF435A-03159B EN 20120619.indd 1 2012-06-19 C- 8:16:13 I

key features of your now

1. VRT PLUS TM (Vibration Reduction Technology)

This Samsung washer minimizies noise and vibration with dual 3D vibration sensors and smart control technology, ensuring quiet operation.

2. The Largest Capacity

Samsung's extra-large capacity laundry machine can wash a full set of your bedding, a

kingsize comforter, or up to 32 bath towels in a single load. Since you don't have to do as many loads, you save time, money, water, and energy.

3. PowerFoam TM

Samsung's effective PowerForm delivers improved cleanliness with advanced fabric care.

PowerFoam allows detergent to distribute evenly and penetrate fabrics faster and deeper.

4. PureCycleTa(Tub Cleaning cycle)

Clean your drum with one button! This Pure Cycle is specially designed to remove detergent residue & dirt bulidup inthe tub, diaphragm and door glass without the need for special chemical detergents.

5. SpeedSpray TM

Samsung's new Speed Spray technology saves you up to 25%* more time when doing

laundry by shortening wash times while still keeping all segments of the washing process

and getting your clothes clean. *Based on 8 pounds loads, Normal cycle (under Normal Soil level without any options),

on previous and existing 4.3 cu.ft. Samsung front loading washers released until 2011 without Speed Spray.

**Speed Spray performs in Normal, Bedding PLUS, Deep Steam, Stain Away and

Eco Cold cycle and the saving time may vary by cycles and various load and option

compositions.

6. Deep steam

The Deep Steam feature boosts cleaning performance and loosens grime and dirt, thus

providing superior cleaning results.

7. Smart Care

Samsung's Smart Care, an automatic error-monitoring system, detects and diagnoses

problems at an early stage and provides a quick and easy solution. With the innovative

Smart Control technology, you can also be alerted when the problem occurs via your smart

phones.

8. Stylish design

The stylish design of this washer blends well with your environment.

9. Digital Display & Center jog dial

The Jog dial enables you to select cycles in both directions with ease, and the display is easy to use and understand.

2 key features of your new Smart PowerFoam TMwasher

X:_T435A-03159B £N 20120619.todd Sec9:2 2012-06-19 _ 8:16:48 I

10.

11.

DD Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates

a higher spin speed of 1,300rpm for more effective, quiter operation. The washer also has fewer moving parts, meaning fewer repairs.

Sanitize

When selecting this cycle, the water heats to an extra high temperature to remove 99.9%

of certain bacteria typically found on clothing, bedding, or towels. This certification is conducted by NSF International, an independent third-party testing and certification organization.

Please check the garment care label to avoid garment damage. Only sanitizing cycles have been designed to meet the requirements of this protocol for sanitization efficacy.

_S_ NSF Protocol P172

Sanitization Performance of Residential and Commercial, Fami / Sized Clothes Washers

12. Pedestal with Storage Drawers (Model No : WE357")

An optional 15" pedestal is available to raise the washer for easier loading and unloading,

It also offers a built-in storage drawer that can hold a 100 oz. bottle of detergent

13. Stacking (Model No : SK-5A/XAA)

Samsung washers and dryers can be stacked to maximize usable space. An optional

stacking kit is available for purchase from your Samsung retailer,

X_T435A-03159B EN 20120619.mdd Sec9:3

key features of your new Smart PowerFoam TMwasher 3

2012-06-19 _ 8:16:48 I

afe v nforrnaton

©ongratulations on your new Samsung washer, This manual contains important

information on the installation, use and care of your appliance, Please take time to read this manual to take full advantage of your washer's many benefits and features,

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

The Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

Hazards or unsafe practices that may result in severe personal injury

Z_ or death.

WARNING To reduce the risk of fire, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

Hazards unsafe that result in minor

or practices

may

personal injury

CAUTION or property damage.

_} Do NOT attempt.

Do NOT disassemble.

[_ Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

These warning signs are here to prevent injury to you and others.

Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

SAVE THESE INSTRUCTIONS

4 safety information

WF435A-03159B £N 20120619.mdd Secl:4 2012-06-19 C-8:16:48 I

Z_ WARNING

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow

basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the washing or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions

that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give offvapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not

been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washer or combination washer-dryer,

turn on all hot water faucets and let the water flow from each for several minutes. This will

release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an

open flame during this time.

_ State of California Proposition 65 Warnings:

WARNING

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the State of California to cause cancer,

birth defects, or other reproductive harm, and requires businesses to warn of potential exposure to such substances. This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, and carbon monoxide.

SAVE THESE INSTRUCTIONS

safety informatior_ 5

WF435A-03159B EN 20120619.todd Secl:5 2012-06-19 Z- 8:16:48 I

nforrn t on

Z_ CRITICAL INSTALLATION WARNINGS

WARNING

Plug the power cord into an AC 120 V / 60 Hz / 15 A wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.

Sharing a wall socket with other appliances, using a power strip, or using an extension cord may result in electric shock or fire. Do not use an electric transformer. It may result in electric shock or fire. Ensure that the voltage, frequency, and amperage provided at the wall socket match the power specifications of the product.

The installation of this appliance must be performed by a qualified technician or service company.

Failing to do so may result in electric shock, fire, an explosion, problems with the product, or injury.

Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.

Unplug the power plug and clean it with a dry cloth. Failing to do so may result in electric shock or fire.

Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.

If you plug the power plug into the socket in the opposite direction, the electric wires

within the cable may be damaged and this may result in electric shock or fire.

This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

Improper grounding may result in electric shock, fi re, an explosion, or problems with the product. Never plug the power cord into a socket that is not grounded correctly and make sure

that it is in accordance with local and national codes.

Do not install this appliance near a heater or inflammable material. Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak.

This may result in electric shock or fire.

Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord, or loose wall socket.

This may result in electric shock or fire.

Do not pull or excessively bend the power cord. Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.

This may result in electric shock or fire.

SAVE THESE INSTRUCTIONS

safety information

WF435A-03159B EN 20120619.mdd Secl:6 2012-06-19 Z-8:16:48 I

Do not pull the power cord when unplugging the power plug.

Unplug the power plug by holding the plug. Failing to do so may result in electric shock or fire.

power plug or power damaged, contact your nearest center.

If the cord is service

Z_X INSTALLATION CAUTIONS

CAUTION

Position the that the is accessible.

appliance

power

plug easily

Failing to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a level and hard floor that can support its weight.

Failing to do so may result in abnormal vibrations, noise, or problems with the product.

Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm.

Failing to do so may result in electric shock or fire.

/_" CRITICAL USAGE WARNINGS

WARNING

(_ f the appliance is flooded, cut the power immediately and contact your nearest service

center. If the appliance emits a strange noise, a burning smell, or smoke,, unplug the power plug

immediately and contact your nearest service center.

Failing to do so may result in electric shock or fire.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord.

Do not use a ventilating fan.

A spark may result in an explosion or fire.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other flammable or explosive substances.

This may result in electric shock, fire or an explosion.

Do not open the washer door by force while the washer is operating (high-temperature washing/drying/spinning).

Water flowing out of the washer may result in burns or cause the floor to be slippery. This may result in injury. Opening the door by force may result in damage to the product or personal injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it.

Do not insert your hand under the washer.

This may result in injury.

SAVE THESE INSTRUCTIONS

safety informatior_ 7

WF435A-03159B EN 20120619.indd Secl:7 2012-06-19 -- 8:16:48 I

, fetv nforrn t on

Do touch the with hands,

not

power

plug

wet

This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire.

Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.

If a child places a bag over its head, it may result in suffocation.

Do not let children or infirm persons use this washer unsupervised.

Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

This may result in injury.

Make sure the detergent drawer is closed before you put laundry into the washer or remove laundry from the washer.

If the detergent drawer is open, you could strike the drawer with your head and injure

yourself.

not attempt to repair, disassemble, or modify appliance yourself.

Do the

Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse. If you need to repair or reinstall the appliance, contact your nearest service center. Failing to do so may result in electric shock, fire, problems with the product, or injury.

If water has enters the appliance anywhere but the drum, unplug the power plug and contact your nearest service center.

Failing to do so may result in electric shock or fire.

When the water supply hose comes loose from the faucet and floods the appliance, unplug the power plug.

Failing to do so may result in electric shock or fire.

If any foreign substance enters the appliance, unplug the power plug and contact you nearest service center.

Failing to do so my result in electric shock or fire.

Z_ USAGE CAUTIONS

CAUTIO_

(_ f the the washer is contaminated by a foreign substance such as detergent, dirt, food

waste, etc., unplug the power plug and clean the washer using a damp, soft cloth.

Failing to do so may result in discoloration, deformation, damage or rust.

If struck hard, the front glass can break. Take care when using the washer.

If the glass is broken, it may result in injury.

SAVE THESE INSTRUCTIONS

8 safety informatior_

WF435A-03159B £N 20120619.mdd Secl:8 2012-06-19 C-8:16:48 I

After a water supply failure or when reconnecting the water supply hose, open the faucet slowly. Open the faucet slowly after a long period of non-use.

The air pressure in the water supply hose or the water pipe may result in damage to a

part or in water leakage.

If a drain error occurs during an operation, check if there is a drainage problem.

If the washer is used when it is flooded because of a drainage problem,, it may result in

electric shock or fire due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the door.

If laundry gets caught in the door, it may result in damage to the laundry or the washer,

or result in water leakage.

Ensure that the faucet is turned off when the washer is not being used.

Ensure that the screw on the water supply hose connector is firmly connected to the

faucet and properly tightened.

Failing to do so may result in property damage or injury.

Take care that the Rubber Seal and the Front Door Glass are not contaminated by a foreign substance (e.g. waste, thread, hair, etc.)

If a foreign substance is caught in the door or the door is not completely closed, it may

cause water leakage.

Open the faucet and check if the water supply hose connector is firmly tightened and that there is no water leaking before using the product.

If the water supply hose connectors are loose, it may result in water leakage.

The product you have purchased is designed for domestic use only.

The use for business purposes qualifies as product misuse. In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.

If the wash is not performed and the laundry is left for a period of time after adding detergent or applying stain remover or pre-treatment onto the laundry, the laundry may be

discolored.

Select the recommended cycle and temperature on the basis of the laundry items, sort the laundry by color on the basis of its colorfastness and select the appropriate cycle.

Make sure that foreign objects such as pins, buttons and coins are removed from clothing items when adding laundry into the washer. Wash dirty laundry separately from relatively clean items and wash fragile items separately from tougher textiles.

If an item is stained, wash it as fast as possible. Use stain remover or detergent only after testing the colorfastness of the item by applying a small quantity to an inside seam.

SAVE THESE INSTRUCTIONS

safety informatior_

WF435A-03159B EN 20120619.indd Secl:9 2012-06-19 Z- 8:16:49 I

nforrn t on

Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

This may result in electric shock, fire, problems with the product, or injury.

Do not operate the appliance with wet hands.

This may result in electric shock.

Do not spray volatile material such as insecticide onto the surface of the appliance.

As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.

Do not place an object that generates a electromagnetic field near the washer.

This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water.

This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats or clothing (*).

Do not wash thick, hard mats even if the washer mark is on the care label.

This may result in injury or damage to the washer, walls, floor or clothing due to abnormal vibrations.

* Woolen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers,

sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed.

This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot.

This may result in burns.

Do not insert your hand into the detergent dispenser after opening it.

This may result in injury as your hand may be caught.

Do not place any non-laundry objects, such as shoes, food waste, or animals into the washer.

This can cause abnormal vibrations that can damage the washer, and, in the case of

pets, cause severe injury or death.

Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.

This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.

This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods of time.

This may cause the tub to rust.

If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface

and use a sponge to clean it. Never use a metal brush.

SAVE THESE INSTRUCTIONS

10 safety informatior_

WF435A-03159B EN 20120619.mdd Secl:10 2012-06-19 Z-8:16:49 I

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.

This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil.

Do not use hot water from water cooling/heating devices.

This may result in problems with the washer.

Do not use natural hand-washing soap in the washer.

If it hardens and accumulates inside the washer, it may result in problems with the product, discoloration, rust or bad odors.

Do not wash large laundry items such as bedding in the washing net.

Failing to do so may result in injury due to abnormal vibrations. Place smaller items, such as lace socks and lingerie in the washing net.

Do not use hardened detergent.

If it accumulates inside the washer, it may cause water leakage.

Do not wash throw rugs or doormats.

If you wash throw rugs or doormats, sand will accumulate inside the washer. It may result in errors such as no draining.

Take care that children's fingers are not caught in the door when closing it.

This may result in injury.

CRITICAL CLEANING INSTRUCTIONS

WARNinG

_} Do not clean the appliance by spraying water directly onto it.

Do not use benzene, thinner or alcohol to clean the appliance.

This may result in discoloration, deformation, damage, electric shock or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

Failing to do so may result in electric shock or fire.

SAVE THESE INSTRUCTIONS

safety information 1

WF435A-03159B EN 20120619.todd Secl:ll 2012-06-19 Z- 8:16:49 I

cont nt,

iNSTALLiNG YOUR WASHER

14 Unpacking your washer 14 Overview of your washer

15 Electrical 15 Grounding

15 Water 15 Drain facility

16 Flooring 16 Location considerations

16 Alcove or closet installation 16 Undercounter installation(washer only)

17 With optional pedestal base or stacking kit 18 Important note to installer

OPERATING iNSTRUCTIONS

21 Loading your washer 21 Getting started

WASHING A LOAD OF LAUNDRY

}

22 Overview of the control panel 24 Delay Start

25 Child Lock 26 Spin Only

26 Drum Light 26 Garment+

26 My cycle 27 Steam

27 Smart Care 28 Washing clothes using the cycle selector

29 Detergent use 29 Features

12 contents

WF435A-03159B EN 20120619.mdd Sec6:12 2012-06-19 Z-8:16:49 I

MAiNTAiNiNG YOUR WASHER

31 Cleaning the exterior 31 Cleaning the interior 32 Cleaning the dispensers 32 Storing your washer 33 Cleaning the debris filter 34 Cleaning the door seal/bellow 34 Preserving the top cover and the front frame 35 Pure Cycle TM

TROUBLESHOOTING 36 Check these points if your washer...

38 Information codes

APPENDIX

40 Fabric care chart 41 Cycle chart

43 Helping the environment 43 Declaration of conformity 43 Specification

X_T435A-03159B IZN 20120619.mdd Sec6:13

contents 13

2012-06-19 _ 8:16:49 I

nsta na vo(]r washer

UNPACKING YOUR WASHER

Unpack your Washer and inspect it for shipping damage. Make sure you have received all of the items

shown below. If your Washer was damaged during shipping, or you do nat have all of the items, contact

1-800-SAMSUNG(726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

/_ Packing materials can be dangerous to children; keep all packing material (plastic bags, polystyrene,

......._ etc.) well out of the reach of children.

OVERVIEW OF YOUR WASHER

Hot water supply

hose

Cold water supply hose

Detergent drawer i

Control panel

Door

Drain Hose

Tub

Debris filter

Drain

Filter cover i 4 Adjustable legs

OOO

Wrench Bolt hole covers

Water supply hoses

Plastic zip hose tieHose guide User manual book

Tools needed

Pliers Flat screwdriver

14 installing your washer

WF435A-03159B £N 20120619.indd Sec3:14 2012-06-19 C-8:16:49 I

BASIC LOCATION REQUIREMENTS

Electrical

120 Volt 60 Hz 15 AMP fuse or circuit breaker Individual branch circuit serving only your Washer is recommended.

Your Washer is equipped with a power cord.

NEVER USE AN EXTENSION CORD.

CAUTION

Grounding

ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a

properly installed and grounded outlet.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electrical

....... shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT SAFETY PRECAUTIONS

To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.

70 Latest Revision and local codes and ordinances. It is the personal responsibility of the

appliance owner to provide adequate electrical service for this appliance.

Z_ NEVER CONNECT GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR HOT

....... WATER PIPES.

Wat e r

To correctly fill your Washer in the proper amount of time, water pressure of 20-116 psi (137-

800kPa) is required.

Water pressure less than 20 psi may cause water valve failure, or may not allow the water valve to shut off completely. Or, it may extend the fill time beyond what your Washer controls allow,

resulting in your Washer turning off. A time limit is built into the controls in the event of an internal hose becoming loose and flooding your home.

The water faucets must be within 4 feet/122 cm of the back of your Washer for the inlet hoses

provided with your Washer,

2} ccessory inlet hoses are available in various lengths up to 10 feet/305cm for faucets that

are further away from the back of your Washer. To avoid the possibility of water damage:

Have water faucets easily accessible Turn off faucets when the washer is not in use.

Periodically check that there is no leakage from the water inlet hose fittings.

CHECK ALL CONNECTIONS AT THE WATER VALVE AND FAUCET FOR LEAKS.

WARNINe

Z_ Using hard water or bad quality water may cause the water supply valve to operate

....... abnormally.

Drain facility

The recommended height of the standpipe is 18 in/46 cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the

outside diameter of the drain hose. The drain hose is attached at the factory.

installing your washer 15

WF435A-03159B £N 20120619.mdd Sec3:15 2012-06-19 C-8:16:49 I

nsta na vo(]r washer

k_J j

Flooring

For Best performance, your Washer must be installed on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting

and soft tile surfaces are contributing factors in vibration may cause your washer to move slightly

during the spin cycle. Never install your washer on a platform or weakly supported structure.

Location considerations

Do not install your washer in areas where water may freeze, since your washer will always maintain some water in its water valve, pump, and hose areas. This can cause damage to the

pump, hoses and other components.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides - 1 in / 25 mm Top - 17 in / 432 mm Rear - 5.9 in / 150 mm Closet Front - 2 in / 51 mm If the washer and dryer are installed together, the closet front must have at least a 72 in2 (465

cm*) unobstructed air opening. Your washer alone does not require a specific air opening.

1 in.

(2.5cm)

l in. 411_ 27 in. _ I_ 27 in. 21I* l in.

(2.5 cm) (68.6 cm) (68.6 crn) (2.5cm)

A. Recessed area

B. Side view - closet or confined area

17in. _'

(43.2cm)

J_,il .....

i_ill _ii ii i

2in._I I_ 34,1in._1 1_5.ein.

(5cm) (86.5crn) (15crn)

Undercounter installation(washer only)

m i

39.6 in.

(100.6 cm)

823

l in. --_11_

(2.5cm)

27,°-HI*- ,,o

(68.6cm) (2.5 cm)

16 installing your washer

X_T435A-03159B £N 20120619.mdd Sec3:16 2012-06-19 C-8:16:49 I

With optional pedestal base or stacking kit

Required Dimensions for Installation With Pedestal

I_ 51.2 in.(130 cm) to clear open door

48 in.2. f

(310ore2)

I_ 34.1in. _ 1_-8.9in.

(86.5cm) (15cm)

39.0 in. (99cm)

: _::_ ....... 53.6in.

(136.2cm) w

"_ 27in. ---_

(68.6 cm)

iii/ _!_i i_ii: i_

Closet or Door

1 in.--_

(2.5cm)

--_ I_ 6in.

(12.7cm)

34.1 in. _ I_ - 5.9in.**

(86.5cm) (15crn)

Required Dimensions for Installation With Stacking Kit

6 in. *

(15.2c_

78 in.

(198crr

l in. 4_ 14 27 in. _1

(2.5cm) (68.6 cm)

X_T435A-03159B £N 20120619.mdd Sec3:17

installing your washer 17

2012-06-19 C-8:16:49 I

nsta na vo(]r washer

IMPORTANT NOTE TO INSTALLER

Please read the following instructions carefully before installing your Washer.

These instructions should be retained for future reference. We recommend you hire a professional for installation of this washer.

STEP 1 Selecting a Location

Before install washer, make the location:

you your

sure

Has a hard, level surface without carpeting or flooring that may obstruct ventilation. Has no dust, oil and detergent etc. Is away from direct sunlight Has adequate ventilation

Will not freeze (below 32°F or O°C)

Is away from heat sources such as oil or gas Has enough slack for the power cord. Doesn't have any carpeting that will obstruct ventilation openings.

STEP 2 Removing the Shipping Bolts

Before using your Washer, you must remove the four shipping bolts from the back of the unit.

t. Loosen all the bolts with the supplied wrench.

2. Slide the bolt and spacer up and remove the bolt with the spacer through the hole in the rear wall of your washer.

Repeat for each bolt.

3. Fill the holes with the supplied Bolt Hole Covers (See page 14).

4. Keep the shipping bolts and spacers for future use.

STEP 3 installing your Washer

t. Place the drain hose in the drain facility. Be

sure an airtight connection is NOT made

between the drain hose and the standpipe. The standpipe must be at least 18 in or 46 cm high.

Caution must always be exercised to avoid collapsing or damaging the drain

hose. For best results, the drain hose should not be restricted in any way - by elbows, couplings, or excessive lengths.

For situations where the drain hose cannot be conveniently elevated to at

least 18 in or 46 cm, the drain hose must be supported.

Stand pipe

18 installing your washer

WF435A-03159B EN 20120619.indd Sec3:18 2012-06-19 -- 8:16:50 I

2. Check the inlet hose to ensure a washer is inside each fill hose. Cold

Thread the inlet hoses to the HOT and COLD faucet connections.

On the other end of the hose, check for one rubber washer

per hose and install each fill hose to the water valve. Make

sure the hose with the Hot printed line is attached to the r_"a/--,

HOT faucet. Tighten by hand until snug, then two-thirds of a

turn with pliers.

3. Connect the other end of the Hot and Cold water supply hose to the inlet water valve at the rear of the washing machine.Tighten by hand until snug, then two-thirds of a

turn with pliers. Cold printed

For correct water use, connect both HOT and COLD water valves. If either or both are not connected, an "nF" (no fill)

error can occur.

4. Turn on the "HOT" and "COLD "water supply and check all

connections at the water valve and the faucet for leaks.

Hot

Rubber

Washer

Hot printed

5. Plug the power cord into a 3-Prong, well grounded 120 volt

60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. Your washer is grounded through the third prong of the

power cord when plugged into a three-prong grounded receptacle.

6. Slide your washer into position.

7. Level your washer by turning the leveling legs in or out as necessary by hand or by using the wrench included with

your washer. When your washer is level, tighten the locking nuts using the wrench or (-) flathead screwdriver.

[_ Your Washer must be leveled on all four sides. A

carpenter's level should be used on all four corners of your Washer. It's a good idea after the first dozen washes to recheck your washer's levelness.

Nut

Levelling Leg

[_ Avoid damage to the legs. Do not move

the Washer unless the Locking-nuts are fastened to the bottom of the Washer.

WF435A-03159B EN 20120619.indd Sec3:19

installing your washer 19

2012-06-19 Z-8:16:50 I

nsta na vo(]r washer

STEP 4 Calibration mode

[_ Before Calibration be take all items from the drum.

using mode,

sure to out

Your Samsung washer automatically detects the weight of the laundry.

For more accurate weight detection, please run Calibration Mode alter the installation. Calibration mode is performed by following the steps below. t. Turn on the washer.

2. Press the Temp. button and Delay Start button simultaneously at least 3 seconds.

3. Remove any contents in the tub and close the door.

4. Press the Start/Pause button to run Calibration Mode.

5. The drum rotates clockwise and counterclockwise approximately for for approximately 3 minutes.

6. When Calibration Mode is finished, the "En/End" appears on the display and the washing machine turns off automatically. The washing machine is now ready for use.

20 installing your washer

WF435A-03159B £N 20120619.mdd Sec3:20 2012-06-19 C-8:16:51 I

LOADING YOUR WASHER

You can fill the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub. Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or

wrinkling of the load. Wash delicate items such as bras, hosiery, and other lingerie in the Delicates cycle with similar

lightweight items. When washing big bulky items or a few smaller items that don't fill the tub completely - a rug, a pillow,

stuffed toys, or one or two sweaters, for example - add a few towels to improve tumbling and spin performance.

[_ uring the spin cycle, the washer may add additional water to redistribute the excessive imbalance

inside the drum.

When washing heavily soiled loads, do not overload your Washer in order to assure good cleaning results.

To add a forgotten item:

1. Press the Start/Pause Button.

2. Wait for the Door Lock light to go out (5 seconds)

3. Add the item, close the door, and press the Start/Pause Button. After a 10-second pause, the cycle will resume.

GETTING STARTED

1. Load your Washer.

2. Close the door.

Z_ Push the laundry into the drum completely to prevent the laundry from being caught in the door or

....... from falling out of the drum.

3. Add detergent and additives to the dispenser (see page 29).

4. Select the appropriate cycle and options for the load (see page 22).

5. Press the Start/Pause Button.

The drum automatically rotates and measures the weight of the laundry without supplying water in

order to adjust the wash time. (The rotating display on the display panel indicates that the weight of the laundry is being measured.)

6. The Wash Indicator light will illuminate.

7. The estimated cycle time will appear in the display. The time may fluctuate to better indicate the time remaining in the cycle.

The actual time required for a cycle may differ from the estimated time in the display depending on the

water pressure, water temperature, detergent, and laundry.

8. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.

[_. When the cycle is complete, the Door Lock light will go out and "End" will appear in the display.

• DO NOT attempt to open the door until the Door Lock light is off. To add aforgotten item, see "Loading your Washer" section. (page 21)

• When your Washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle continues.

• Pressing the Power button cancels the cycle and stops your washer.

" The Pre Wash, Wash, Rinse and Spin indicator lights will illuminate during those portions of the cycle.

Z_Do not place anything on top of your washer while it is running.

WARNINe

operating instructions 21

X_T435A-03159B £N 20120619.mdd Sec2:21 2012-06-19 C-8:16:51 I

wash na a cad of aLAndrv

_s j

Z_ WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT

....... SAFETY INSTRUCTIONS before operating this appliance.

OVERVIEW OF THE CONTROL PANEL

Normal--

Bedding PLUS-

[] Steam Cycles

....................................Active Wear

Delicates I

Wool

--Quick Wash

-- Rinse+Spin

Power

Start/Pause

@ @ @ @@ @ @

Select the appropriate cycle for the type of load. This will determine the tumble pattern and spin speed for the cycle.

To minimize of select the Perm Press

wrinkling laundry, cycle.

Normal - For most fabrics including cottons, linens, and normally soiled garments. Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.

Bedding PLUS - For bulky items such as blankets and sheets. When you are washing comforters, use liquid detergent.

Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to 150°F to eliminate bacteria.

If Pause is selected during the heating portion of the Sanitize Cycle, your

Washer door will remain locked for your safety.

Stain Away - F:orstained clothes. Stain Away cycle provides outstanding stain removal performance, with the utmost gentle care, avoiding the need for pre-treatment d stains.

For Best stain removal performance, it is recommended to use hot temperature option in this cycle, in which the wash temperature is increased

using the internal heater, for overall cleaning of the different stains. Deep Steam - For heavily soiled, colorfast garments, this cycle provides high

washing temperature and steam and is efficient in cleaning stains. Eco Cold - It provides useful daily care for normally and lightly soiled laundry

by using only cold water, saving energy and caring fabric. It cleans as effectively as the warm wash setting on *conventional Normal

cycle under Normal and Light Soil level options. (Cleaning performance of Eco Cold cycle may not be equal to conventional Normal cycle under heavy soil level option) For best result, it is recommended to use less than 8 pounds.

* conventional Normal cycle - Normal cycle on previous and existing Samsung front loading washers released until 2009 without PowerFoam

Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally soiled garments.

Active Wear - Use this cycle to wash exercise wear such as sports jersey, training pants, shirts/tops and other performance clothing. This cycle provides effective soil removal with gentle action for special fabric care.

22 washing a load of laundry

WF435A-03159B £N 20120619.indd Sec5:22 2012-06-19 C-8:16:51 I

Delicates/Hand Wash - For sheer fabrics, bras, lingerie silk, and other handwash-only fabrics. For best results, use liquid detergent.

Wool - For machine-washable wool. Loads should be under 8 pounds. For best results, we recommend a load of 4.4 pounds or less.

• The Wool cycle washes laundry by moving the wash drum horizontally to maintain the characteristics of the wool fibers and to prevent damage to the cloth. It then stops for a while to allow the laundry to soak in the

water. This pause in the operation of the Wool cycle is normal.

• We recommend you use a neutral detergent to prevent damage to the

cloth and to improve the washing results. Quick Wash - For lightly soiled garments needed quickly. Rinse + Spin - Use for loads that need rinsing only or to add rinse-added

fabric softener to a load. The large Digital Display is easy to use. It provides instructions and

diagnostics while keeping you updated on the cycle status and time remaining.

Press the button repeatedly to cycle through the different water temperature options.

Extra Hot - Heavily soiled, colorfast items. Only available with the Sanitize cycle.

Hot - Whites and heavily soiled, colorfast items. Warm - Colorfast items. When warm rinse is selected, only the final rinse will

be warm. The other rinses will be cold to conserve energy.

Eco Warm - Moderately soiled, colorfast items; most wrinkle-free items. Cold - Brightly colored, very lightly soiled items. Press the button repeatedly to cycle through the different spin speed options. Extra High - Removes more water from loads during spin.

To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use the Extra High spin option for these loads, nor overload your Washer.

High - Use for underwear, t-shirts, jeans and sturdy cottons. Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.

Low - Use for delicate items needing a slow spin speed. No Spin - Drains your Washer without spinning. Use for extremely delicate

items that cannot tolerate any spin. Press the button to select the soil level/washing time.

(Heavy -->,A ÷ Normal --> Y --> Light) Heavy - For heavily soiled loads.

Normal - For moderately soiled loads. This setting is best for most loads.

Light - For lightly soiled loads.

X:_T435A-03159B £N 20120619.todd Sec5:23

washing a load of laundry 23

2012-06-19 _ 8:16:51 I

wash na a cad of aLAndrv

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

______________________________________________________________________________________________________________________

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

______________________________________________________________________________________________________________________

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

______________________________________________________________________________________________________________________

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

______________________________________________________________________________________________________________________

Delay Start

Press these buttons to select different cycle options. Pre Wash - To use this feature, add detergent to the pre wash section of the detergent compartment. When turned on, the washer fills with cold water and detergent, tumbles, then drains and advances to the selected wash cycle. Some cycles cannot be selected with with this option.

You cannot select the prewash option in the Wool, Quick Wash,

Delicates/Handwash and Rinse+Spin cycles.

Extra Rinse - Add an additional rinse at the end of the cycle to more thoroughly remove laundry additives and perfumes.

Extra Spin - Add additional time to remove more water from loads. Signal On/Off - When you activate Signal off function, the "Signal off [_]"

lamp illuminate. My Cycle - Choose your favorite cycle including temperature, spin, soil level,

option, etc. Delay Start - Any cycle can be delayed for up to 24 hours in one-hour

increments. Displayed hour indicates the time at which the wash will be started. Pure Cycle TM - Use to clean dirt and bacteria from the drum. Regular use

(after every 40 washes) is recommended. No detergent or bleach is needed (see page 35).

Steam - Press this button to use the Steam Wash function. Steam Wash is available with Heavy Duty, Normal, Perm Press, Sanitize, Bedding PLUS

cycles. For heavily soiled, colorfast garments, Steam Wash improves stain treatment and uses less water (See page 27).

Press to pause and restart programs.

Press once to turn your washer on, press again to turn your washer off. If the washer is left on for more than 10 minutes without any buttons being

touched, the power automatically turns off.

You can set the washing machine to finish your wash automatically at a later time, choosing a

delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time at

which the wash will be finished.

t. Manually or automatically set your washing machine according to the type of laundry you are

washing.

2. Press the Delay Start button repeatedly until the delay time is set.

3. Press the Start/Pause button. The "Delay Start [_]" indicator will be lit, and the clock will begin counting down until it reaches the set time.

4. To cancel a Delay End function, press the Power button and then turn the washing machine on again.

24 washing a load of laundry

WF435A-03159B £N 20120619.mdd Sec5:24 2012-06-19 C-8:16:51 I

Child Lock

This function prevents children from playing with your washer.

Z_ Although the Child Lock function is activated, you must keep an eye on children so that

o,oT,o,they do not operate your washer.

Activating the Child Lock function

Press and hold both the Spin and Soil Level buttons simultaneously for approximately 3 seconds.

When you activate the Child Lock function, the door locks and the "Child Lock [t_1 ]" lamp

illuminates. If you press the Start/Pause button after you have activated the Child Lock function, none

of the buttons will work except for the Power button.

If you press a button when the buttons are locked, the "Child Lock [6)]" lamp blinks.

Pausing the Child Lock function

When the door is locked or the buttons are locked by the Child Lock function, you can pause the

Child Lock operation for 1 minute by pressing and holding both the Spin and Soil Level buttons simultaneously for approximately 3 seconds.

If you pause the Child Lock mode temporarily, the door lock is released for 1 minute for user

convenience. During this period, the "Child Lock

Samsung WF435ATGJWR/A1-0002, WF435ATGJRA/A1-0002, WF435ATGJWR/A1-0001, WF435ATGJRA/A1-0001, WF435A Series User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual