Samsung WF339AAW/XAA, WF338AAW/XAA User Manual

Washing Machine

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/global/register

WF338*

WF338AA-02562A-01_EN.indd 1 2008-03-10 ¿ÀÈÄ 3:35:31

2_ Features of your new silvercare™ washer

features of your new silvercare™ washer

1. SilverCare™

Washing in cold water is energy efficient and better for your clothes.

2. Steam Washer

Injects steam directly onto your laundry to increase the water temperature and enhance the Soak effect, improving the wash performance.

3. Diamond Drum

With inside holes 36% smaller than those of conventional drums, the diamond drum prevents fabrics from sticking out and consequently being damaged.

4. Extra Large Capacity

Even bulky garments and blankets get super clean. The large capacity leaves enough room for a more thorough, cleaner wash.

5. High Efficiency Energy & Water Saving

The SilverCare™ system uses 92% less energy than traditional heat sanitization.

6. Direct Drive Inverter Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates a higher spin speed of 1,300rpms for more effective, quiet operation. The washer also has fewer moving parts.

7. Woolmark Certified

The machine wash wool cycle on the Samsung SilverCare™ machines has been tested and passed the required Woolmark Company specification for machine washable wool products. Fabrics should be washed according to the instructions on the garment label as specified by Woolmark and Samsung.

Pedestal with Storage Drawers (Model No : WE357A7W/S/R/L/G/B)

An optional 15” pedestal is available to raise the washer for easier loading and unloading. It also offers a built-in storage drawer that can hold a 100 oz. bottle of detergent

9. Stacking (Model No : SK-3A1/XAA , SK-4A/XAA , SK-5A/XAA)

Samsung washers and dryers can be stacked to maximize usable space. An optional stacking kit is available for purchase from your Samsung retailer.

WF338AA-02562A-01_EN.indd 2 2008-03-10 ¿ÀÈÄ 3:35:32

Safety information _3

safety information

Congratulations on your new Samsung SilverCare™ Washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your Washer’s many benefits and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your Washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

WARNING

Hazards or unsafe practices that may result in severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result in minor personal injury or property damage.

CAUTION

To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicity.

Unplug the pwer plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Read all instructions before using the appliance.

As with any equipment using electricity and moving parts, potential hazards exist. To safely operate this appliance, become familiar with its operation and exercise care when using it.

Install and store your washer inside, away from exposure to weather.

Install and level your washer on a floor that can support its weight.

Your washer must be properly grounded. Never plug it into an ungrounded outlet. See page 7 for more information on grounding your washer.

WF338AA-02562A-01_EN.indd 3 2008-03-10 ¿ÀÈÄ 3:35:33

4_ Safety information

To reduce the risk of fire or explosion:

• Do not wash items that have been washed, soaked, or treated with gasoline, dry

cleaning solvents, or other flammable or explosive substances. They give off vapors that could ignite or explode. Rinse by hand any material that has been exposed to cleaning solvent or other flammable liquids or solids before putting in your washer. Be sure that all traces of such liquids, solids, and fumes have been removed. Dangerous substances include acetone, denatured alcohol, gasoline, kerosene, certain liquid household cleaners and spot removers, turpentine, waxes, and wax removers.

• Do not put gasoline, dry cleaning solvents, or other flammable or explosive substances

into the washer.

• Under certain conditions, hydrogen gas may be produced in a hot water system–such

as your hot water heater-- that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or more, turn on all hot water faucets in your home, and let the water flow for several minutes before using your washer. This will release any hydrogen gas build–up. Since hydrogen gas is flammable, do not smoke or light an open flame during this time.

Unplug the power cord before servicing your washer.

Do not reach into the appliance when the tumbler is moving.

Do not let children play on or in your washer. The washer door isn’t easily opened from the inside, and a child could be seriously injured if trapped inside.

Do not tamper with the controls.

Do not repair, replace, or service any part of your washer yourself unless you fully understand the recommended user–repair instructions and have the skills to carry them out. Work done by an unauthorized person may void your warranty.

Store laundry detergents and other laundry supplies in a cool, dry place out of children’s reach.

Do not wash or dry items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

Do not use chlorine bleach, ammonia, or acids (such as vinegar or rust remover) in the same wash. Hazardous fumes can form.

Do not machine wash fiberglass materials. Small particles can stick to fabrics washed in subsequent loads and cause skin irritation.

Before disposing of your washer, remove the door so that children or small animals cannot get trapped inside.

Do not sit on top of your Washer.

Inlet hoses are subject to damage and deterioration over time. Check the hoses periodically for bulges, kinks, cuts, wear or leaks, and replace them every five years.

Ensure pockets are free from small irregularly shaped hard objects or foreign materials, such as coins, knives, pins, etc. These objects could damage your washer.

Do not wash clothing with large buckles, buttons, or other heavy metal.

WARNING

CAUTION

WF338AA-02562A-01_EN.indd 4 2008-03-10 ¿ÀÈÄ 3:35:33

Contents _5

contents

INSTALLING YOUR WASHER

6 Unpacking your washer 6 Overview of your washer

7 Electrica

7 Groundin

7 Wate

8 Drain facilit

8 Floorin

8 Location consideration

8 Alcove or closet installatio

9 Important note to installer

OPERATING INSTRUCTIONS

11 Loading your washer 11 Getting started

WASHING A LOAD OF LAUNDRY

12 Overview of the control panel

14 Child loc

14 Garment

15 For SilverCare™ washing 15 Using Steam Wash 16 Detergent use 16 Features

MAINTAINING YOUR WASHER

18 Cleaning the exterior 18 Cleaning the interior 18 Cleaning the dispensers 19 Cleaning the debris filter 20 Storing your washer

TROUBLESHOOTING

21 Check these points if your washer… 23 Information codes

APPENDIX

25 Fabric care chart 26 Helping the environment 26 Declaration of conformity 26 SPECIFICATIONS 27 Cycle chart

WF338AA-02562A-01_EN.indd 5 2008-03-10 ¿ÀÈÄ 3:35:33

6_ Installing your washer

installing your washer

UNPACKING YOUR WASHER

Unpack your Washer and inspect it for shipping damage. Make sure you have received all of the items shown below. If your Washer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG(7267864).

OVERVIEW OF YOUR WASHER

( use for the Upper Bolt Hole )

Wrench Bolt hole covers Water Supply Hose Rubber Washer Hose guide

Cold water supply hose

Hot water supply

hose

Drain hose

Debris filter

Detergent drawer

Control panel

Door

Drain tube

Adjustable leg

Filter cover

WF338AA-02562A-01_EN.indd 6 2008-03-10 ¿ÀÈÄ 3:35:35

Installing your washer _7

BASIC LOCATION REQUIREMENTS

Electrical

• 120 Volt 60 Hz 15 AMP fuse or circuit breaker

• Individual branch circuit serving only your Washer is recommended.

• Your Washer is equipped with a power cord.

NEVER USE AN EXTENSION CORD.

Grounding

ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet.

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT SAFETY PRECAUTIONS

• To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and

grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.

NEVER CONNECT GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR HOT WATER PIPES.

Water

To correctly fill your Washer in the proper amount of time, water pressure of 20 – 120 psi is required.

Water pressure less than 20 psi may cause water valve failure, not allowing the water valve to shut off completely. Or, it may extend the fill time beyond what your Washer controls allow, resulting in your Washer turning off. A time limit is built into the controls in the event of an internal hose becoming loose and flooding your home.

The water faucets must be within 4 feet/122cm of the back of your Washer for the inlet hoses provided with your Washer.

Accessory inlet hoses are available in various lengths up to 10 feet/305cm for faucets that are further away from the back of your Washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible

• Turn off faucets when the washer is not in use.

• Periodically check that there is no leakage from the water inlet hose fittings.

CHECK ALL CONNECTIONS AT THE WATER VALVE AND FAUCET FOR LEAKS.

01 Installing your washer

CAUTION

WARNING

WF338AA-02562A-01_EN.indd 7 2008-03-10 ¿ÀÈÄ 3:35:36

8_ Installing your washer

Drain facility

The recommended height of the standpipe is 18 in/46 cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, your Washer must be installed on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting and soft tile surfaces are contributing factors in vibration and/or tendency for your washer to move slightly during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location considerations

Do not install your washer in areas where water may freeze, since your washer will always maintain some water in its water valve, pump, and hose areas. This can cause damage to the belts, pump, hoses and other components. Operating temperature should be above 60°F/16°C.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides – 1 in / 25 mm Rear – 4 in / 102 mm

Top – 17 in / 432 mm Closet Front – 2 in / 51 mm

If the washer and dryer are installed together, the closet front must have at least 72 in² or 465 cm² of an unobstructed air opening. Your washer alone does not require a specific air opening.

installing your washer

WF338AA-02562A-01_EN.indd 8 2008-03-10 ¿ÀÈÄ 3:35:36

Installing your washer _9

IMPORTANT NOTE TO INSTALLER

Please read the following instructions carefully before installing your Washer. These instructions should be retained for future reference. We recommend you hire a professional for installation of this washer.

STEP 1

Removing the Shipping Bolts

Before using your Washer, you must remove the four shipping bolts from the back of the unit.

1. Loosen all four bolts with the supplied wrench.

2. Slide the bolt and spacer up and remove the bolt with

the spacer through the hole in the rear wall of your washer. Repeat for each bolt.

3. Fill the holes with the supplied plastic covers.

4. Keep the shipping bolts and spacers for future use.

STEP 2

Selecting a Location

Before you install your washer, make sure the location:

• Has a hard, level surface

• Is away from direct sunlight

• Has adequate ventilation

• Will not be freezing (below 32°F or 0°C)

• Is away from heat sources such as oil or gas

• Has enough space so that your Washer need not stand on its power cord

• Doesn’t have any carpeting that will obstruct ventilation openings.

STEP 3

Installing your Washer

1. Place the drain hose in the drain facility. Be

sure an airtight connection is NOT made between the drain hose and the standpipe. The standpipe must be at least 18 in or 46 cm high.

Caution must always be exercised to avoid collapsing or damaging the drain hose. For best results, the drain hose should not be restricted in any way – by elbows, couplings, or excessive lengths. For situations where the drain hose cannot be conveniently elevated to at least 18 in or 46 cm, the drain hose must be supported.

01 Installing your washer

96” Max 18” Min

Hose

retainer

Tie strap

Laundry tub Stand pipe

WF338AA-02562A-01_EN.indd 9 2008-03-10 ¿ÀÈÄ 3:35:38

10_ Installing your washer

2. Insert new rubber washer (supplied) into each end of the

inlet hoses. Firmly seat the washers in the couplings.

3. Check the inlet hose to ensure a washer is inside each fill

hose. Thread the inlet hoses to the HOT and COLD faucet connections. On the other end of the hose, check for one rubber washer per hose and install each fill hose to the water valve. Make sure the hose with the Hot printed line is attached to the HOT faucet. Tighten by hand until snug, then two-thirds of a turn with pliers.

For correct water use, connect both HOT and COLD water valves. If one is not connected, an “nF” (no fill) error can occur.

4. Turn on the “HOT” and “COLD “water supply and check all

connections at the water valve and the faucet for leaks.

5. Plug the power cord into a 3-Prong, well grounded 120 volt

60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. Your washer is grounded through the third prong of the power cord when plugged into a three-prong grounded receptacle.

6. Slide your washer into position.

7. Level your washer by turning the leveling legs in or out as

necessary by hand or wrench included with your washer. When your washer is level, tighten the nuts using the wrench or (-) driver.

Your Washer must be leveled on all four sides. A carpenter’s level should be used on all four corners of your Washer. It’s a good idea after the first dozen washes to recheck your washer’s levelness.

Avoid the damage of legs, Do not move the Washer unless the Lockingnuts are fastened to the bottom of the Washer.

installing your washer

Cold Hot

Cold printed Hot printed

Rubber washer

WF338AA-02562A-01_EN.indd 10 2008-03-10 ¿ÀÈÄ 3:35:41

Operating instructions _11

operating instructions

LOADING YOUR WASHER

• You can fill the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub.

• Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or

wrinkling of the load.

• Wash delicate items such as bras, hosiery, and other lingerie in the Delicates cycle with similar

lightweight items.

• When washing big bulky items or a few smaller items that don’t fill the tub completely – a rug, a pillow,

stuffed toys, or one or two sweaters, for example – add a few towels to improve tumbling and spin performance.

During the spin cycle, the washer may add additional water to redistribute the excessive unbalance inside the drum.

• When washing heavily soiled loads, not overloading your Washer is very important to assure good

cleaning results.

• To add a forgotten item:

1. Press the Start/Pause Button.

2. Wait for the Door Lock light to go out (5 seconds)

3. Add the item, close the door, and press the Start/Pause Button.

After a pause of 10 seconds, the cycle will resume.

To ensure thorough cleaning, add items within five minutes of starting the wash cycle.

Try washing bedding, towels, undergarments, and other articles that usually have close body contact using the SilverCare™ Option, which sanitizes using cold water.

GETTING STARTED

1. Load your Washer.

2. Close the door.

3. Add detergent and additives to the dispenser (see pages 16~17).

4. Select the appropriate cycle and options for the load (see pages 12~15).

5. Press the Start/Pause Button.

6. The Wash Indicator light will illuminate.

7. The estimated cycle time will appear in the display.

The time may fluctuate to better indicate the time remaining in the cycle.

8. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a

quick drain.

• When the cycle is complete, the Door Lock light will go out and “End” will appear in the display.

• DO NOT attempt to open the door until the Door Lock light is off. To add a forgotten item, see

“Loading your Washer” section. (page 11)

• When your Washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle

continues.

• Pressing Power cancels the cycle and stops your washer.

• The Pre Wash, Wash, Rinse and Spin indicator lights will illuminate during those portions of the

cycle.

02 Operating instructions

WF338AA-02562A-01_EN.indd 11 2008-03-10 ¿ÀÈÄ 3:35:42

12_ Washing a load of laundry

washing a load of laundry

OVERVIEW OF THE CONTROL PANEL

Digital graphic display

Displays the remaining cycle time, all cycle information, and error messages.

Temperature selection button

Press the button repeatedly to cycle through the different water temperature options.

Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the Sanitize cycle. Hot/Cold - Whites and heavily soiled, colorfast items. Warm/Warm - Colorfast items. When warm rinse is selected, only the final rinse will

be warm. The other rinses will be cold to conserve energy.

Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items. Cold/Cold - Brightly colored, very lightly soiled items.

Spin selection button

Press the button repeatedly to cycle through the different spin speed options. Extra High - Removes more water from loads during spin.

To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use the Extra High spin option for these loads, nor overload your Washer.

High - Use for underwear, t-shirts, jeans and sturdy cottons. Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics. Low - Use for delicate items needing a slow spin speed. No Spin - Drains your Washer without spinning. Use for extremely delicate

items that cannot tolerate any spin.

Steam Button

Press the button to add steam to your laundry. When steam is added, steam fills the inside of the washer, the door glass mists up and the sound of steam is heard. The door does not open during or after the steam operation if the internal temperature is too high. Steam is only available when a Steam cycle is selected.

Soil Level selection button

Press the button to select the Soil Level/washing time.

Heavy - For heavily soiled loads. Normal - For moderately soiled loads. This setting is best for most loads. Light - For lightly soiled loads.

Signal selection button

Press the button to increase or decrease the end of cycle signal volume or turn off the signal.

WF338AA-02562A-01_EN.indd 12 2008-03-10 ¿ÀÈÄ 3:35:43

Washing a load of laundry _13

Select Cycle Option

Press these buttons to select different cycle options. Delay Start - Any cycle can be delayed for up to 24 hours in one-hour

ncrements. Displayed hour indicates the time at which the wash will be started.

Extra Wash - Add additional time to the wash cycle for better stain removal. Extra Rinse - Add an additional rinse at the end of the cycle to more

thoroughly remove laundry additives and perfumes.

Extra Spin - Add additional time to remove more water from loads. Silver Care - The SilverCare™ system uses 92% less energy than traditional

heat sanitization. Pre Wash - To use this feature add detergent to the Pre Wash section of the

detergent compartment. When turned on, the washer fills with cold water and detergent, tumbles, then drains and advances to the selected wash cycle. Some cycles cannot be selected with this option.*

* You cannot select the PreWash option in the Delicate, Wool and Quick

Wash cycles.

Cycle Selector

Select the appropriate cycle for the type of load. This will determine the tumble pattern and spin speed for the cycle.

To minimize wrinkling of laundry, select the Perm Press cycle.

Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments. Normal - For most fabrics including cottons, linens, and normally soiled garments. Whites - For white fabrics with or without bleach. Deep Steam - A wash course for extremely soiled laundry. Delicates - For sheer fabrics, bras, lingerie silk, and other handwash-only

fabrics. For best results, use liquid detergent. Wool - For machine-washable wool. Loads should be under 8 pounds.

The wool wash cycle of this machine has been approved by

Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine, M0509.

Quick Wash - For lightly soiled garments needed quickly. Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to

150°F to eliminate bacteria.

If Pause is selected during the heating portion of the Sanitize Cycle, your Washer door will remain locked for your safety.

Rinse + Spin - Use for loads that need rinsing only or to add rinse-added fabric softener to a load.

Spin Only - Provides a spin to remove more water. Towels - For bath towels, washcloths and mats. Hand Wash – A very light wash course similar to a hand wash.

Start/Pause selection button

Press to pause and restart programs.

Power button

Press once to turn your washer on, press again to turn your washer off. If the washer is left on for more than 10 minutes without any buttons being touched, the power automatically turns off.

03 Washing a load of laundry

WF338AA-02562A-01_EN.indd 13 2008-03-10 ¿ÀÈÄ 3:35:45

14_ Washing a load of laundry

Child lock

A function that prevents children from playing with your washer.

ACTIVATING/DEACTIVATING

If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal buttons at the same time for 3 seconds.

How It Works:

1. “Child Lock” can be activated while your Washer is running.

2. Once you activate “Child Lock”, all controls (except for the Power button) will be locked

until you deactivate “Child Lock”.

3. The Child Lock button will be lit while it is in effect.

When buttons, other than the Power button, do not respond, please check if the “Child Lock” function is on.

Garment+

You can add or take out laundry items even after the wash has started, as long as the “Garment+” light is on. Pushing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much water in your Washer. If you are able to unlock the door and wish to continue the wash cycle, close the door and press the

Start/Pause button.

washing a load of laundry

WF338AA-02562A-01_EN.indd 14 2008-03-10 ¿ÀÈÄ 3:35:45

Washing a load of laundry _15

FOR SILVERCARE™ WASHING

Extra delicate blouses, shirts, or even lingerie that can’t be washed in hot water can now be sanitized effectively without the adverse effects of hot water. The silver plates can easily be replaced by a Service Technician if needed.

To use :

1. Load the washer.

2. Press the Power button.

3. Select a Cycle by turning the Cycle Selection dial.

4. Press the SilverCare™ button.

5. Add detergent in the dispenser tray for main washing, and add fabric softener up to the marked line.

6. Press the Start/Pause button.

: The washer automatically selects optimal washing conditions by sensing the laundry’s weight.

FOR HOME USE ONLY– COMMERCIAL USERS SHOULD NOTIFY THEIR LOCAL WASTE TREATMENT AUTHORITIES BEFORE USE

To display the total number of silver cycles performed by the washer, press both the Signal and SilverCare™ buttons at the same time and hold them down for 3 seconds.

LU1 : less than 1000 times LU0 : 1000 times You should replace the SilverCare™ kit when the display reads “LU0” as the electrodes are near the end of

their useful life. Contact 1-800-SAMSUNG.

You cannot choose the SilverCare™ option with the Wool cycle.

USING STEAM WASH

Injects steam directly onto the laundry in the wash tub to increase the wash temperature and enhance the Soak effect, improving the wash performance.

1. Load the washer.

2. Press the Power button.

3. Turn the Cycle Selector and select a Steam Cycle. (The Deep Steam course automatically selects

Steam.)

4. Press the Steam button.

5. Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked line.

6. Press the Start/Pause button.

: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.

If steam wash is selected, steam is injected at the most effective time for the detected amount of laundry in order to maximize the effect of the steam.

Steam is injected 8 minutes after the start of the cycle. Steam is injected for 1.5 seconds and then stops for 13 seconds. This operation is repeated for the next 16 minutes. The Steam function can selected with standard cycles (except pre-wash).

03 Washing a load of laundry

WF338AA-02562A-01_EN.indd 15 2008-03-10 ¿ÀÈÄ 3:35:45

16_ Washing a load of laundry

DETERGENT USE

Your Washer is designed to use high efficiency (HE) detergents.

• For best cleaning results, use a high efficiency detergents such as Tide

HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more efficiently and cleaning is maximized.

Regular detergent is NOT recommended. Please use HE detergents only.

Reducing the amount of detergent may reduce cleaning quality. It is important to pre–treat stains, sort carefully by color and soil level, and avoid overloading. * Brand names are trademarks of their respective manufacturers.

FEATURES

Automatic dispenser

Your Washer has separate compartments for dispensing detergent and color-safe bleach, chlorine bleach, and fabric softener. All laundry additives are added to their respective compartments before starting your Washer.

The automatic dispenser MUST ALWAYS be in place before starting your Washer.

DO NOT open the automatic dispenser when your Washer is running.

To use:

1. Pull out the dispenser drawer on the left side of the control

panel.

2. Add recommended quantity of additive to the appropriate

compartments with laundry additives, being careful not to overfill or spill.

3. Slide the dispenser drawer carefully and completely back

into the compartment.

Detergent compartment

1. Pour the recommended amount of laundry detergent directly into the detergent compartment

before starting your Washer.

2. If color-safe bleach is to be used, it should be added with detergent to the detergent

compartment.

• When adding color-safe bleach with detergent, it is best if both laundry products are in the same form – granular or liquid.

If using liquid detergent, lower the detergent selector and add the detergent to the detergent compartment.

washing a load of laundry

WARNING

Detergent selector

Pre wash compartment

Detergent compartment

WF338AA-02562A-01_EN.indd 16 2008-03-10 ¿ÀÈÄ 3:35:46

Washing a load of laundry _17

Pre wash compartment

When using the Pre Wash option, detergent should be added to both the Pre Wash compartment and the detergent compartment. The detergent will automatically be dispensed during Pre Wash.

• If high efficiency (HE) detergent is used, add 1/3 of the recommended amount to the Pre

Wash compartment and 2/3 of the recommended amount to the detergent compartment.

Bleach compartment

(Liquid chlorine bleach only)

1. Add chlorine bleach to the bleach compartment.

DO NOT exceed the MAX FILL line.

2. Avoid splashing or over–filling the compartment.

3. Your Washer automatically dispenses bleach into the tub at

the appropriate time.

4. The dispenser automatically dilutes liquid chlorine bleach

before it reaches the wash load.

• Never pour undiluted liquid chlorine bleach directly

onto the load or into the tub. It is a powerful chemical and can cause fabric damage, such as weakening of the fibers or color loss, if not used properly.

• If you prefer to use color–safe, non–chlorine bleach,

add it to the appropriate detergent compartment. DO NOT pour color–safe bleach into the Bleach compartment.

Fabric softener compartment

1. Pour the recommended amount of liquid fabric softener into the softener compartment.

For smaller loads, use less than one capful.

2. Fabric softener should be diluted with water until it reaches MAX FILL in the compartment.

3. The dispenser automatically releases liquid fabric softener at the proper time during the rinse

cycle.

• Use the softener compartment ONLY for liquid fabric softeners.

• DO NOT use a Downy Ball* in the Fabric softener Compartment with this Washer. It will

not add fabric softener at the appropriate time. Use the detergent Compartment.

* Brand names are trademarks of their respective manufacturers.

03 Washing a load of laundry

Fabric Softener

compartment

Bleach

compartment

WF338AA-02562A-01_EN.indd 17 2008-03-10 ¿ÀÈÄ 3:35:46

18_ Washing a load of laundry

maintaining your washer

CLEANING THE EXTERIOR

Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to your Washer and prevent the unlikely possibility of damage from

escaping water. Leave the door open to allow the inside of your Washer to dry out. Use a soft cloth to wipe up all detergent, bleach or other spills as they occur. Clean the following as recommended: Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not spray

cleaners directly on the panel. Cabinet – Clean with soap and water.

CLEANING THE INTERIOR

Clean the interior of your Washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial residue that may remain in your Washer as a result of washing clothes.

Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent stains on your Washer or laundry.

Hard water deposits may be removed, if needed. Use a cleaner labeled “Washer safe”.

CLEANING THE DISPENSERS

The Automatic Dispenser may need to be cleaned periodically due to laundry additive buildup.

1. Press the release lever on the inside of the dispenser and pull out.

2. Remove the Siphon Cap from the fabric softener and bleach

compartments.

3. Wash all of the parts under running water.

4. Clean the dispenser recess with a soft brush.

5. Reinsert the Siphon Cap, and push it firmly into place.

6. Push the dispenser back into place.

7. Run a Rinse & Spin cycle without any load in your Washer.

Siphon cap

WF338AA-02562A-01_EN.indd 18 2008-03-10 ¿ÀÈÄ 3:35:47

+ 42 hidden pages