Samsung WF218ANW User Manual

Washing Machine

user manual

WF218ANB

WF218ANW

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/global/register

WF218ANB-02240B_EN.indd 1 2008-02-20 ¿ÀÀü 10:30:36

2_ Features of your new washer

features of your new washer

1. Extra Large Capacity

Even bulky garments and blankets get super clean. The large capacity leaves enough room for a more thorough, cleaner wash.

2. Direct Drive Inverter Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates a higher spin speed of 1,150rpms for more effective, quiet operation. The washer also has fewer moving parts.

3. Woolmark Certified

The machine wash wool cycle on the Samsung machines has been tested and passed the required Woolmark Company specification for machine washable wool products. Fabrics should be washed according to the instructions on the garment label as specified by Woolmark and Samsung.

4. Pedestal with Storage Drawers (Model No : WE357A7W/S/R/L/G/ B)

An optional 15” pedestal is available to raise the washer for easier loading and unloading. It also offers a built-in storage drawer that can hold a 100 oz. bottle of detergent

5. Stacking (Model No : SK-3A1/XAA , SK-4A/XAA)

Samsung washers and dryers can be stacked to maximize usable space. An optional stacking kit is available for purchase from your Samsung retailer.

WF218ANB-02240B_EN.indd 2 2008-02-20 ¿ÀÀü 10:30:37

Safety information _3

safety information

Congratulations on your new Samsung Washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your Washer’s many benefits and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your Washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

WARNING

Hazards or unsafe practices that may result in severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result in minor personal injury or property damage.

CAUTION

To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow dir

ections explicity

Unplug the pwer plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Read all instructions befor

e using the appliance.

ith any equipment using electricity and moving parts, potential hazards exist.

o safely operate this appliance, become familiar with its operation

and be careful when

using it.

Install and store your washer inside, away from exposure to weather.

Install and level your washer on a floor that can support its weight.

Your washer must be pr

operly grounded. Never plug it into an ungrounded outlet. See page

7 for more information on grounding your washer.

WF218ANB-02240B_EN.indd 3 2008-02-20 ¿ÀÀü 10:30:37

4_ Safety information

To reduce the risk of fire or explosion:

• Do not wash items that have been washed, soaked, or treated with gasoline, dry

cleaning solvents, or other flammable or explosive substances. The

y give off vapors that could ignite or explode. Rinse by hand any material that has been exposed to cleaning solvent or other flammable liquids or solids before putting in your washer. Be sure that all traces of such liquids, solids, and fumes have been removed. Dangerous substances include acetone, denatured alcohol, gasoline, kerosene, certain liquid household cleaners and spot removers, turpentine, waxes, and wax removers.

• Do not put gasoline, dry cleaning solvents, or other flammable or explosive substances

into the washer

• Under certain conditions, hydrogen gas may be pr

oduced in a hot water system–such as your hot water heater-- that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or more, turn on all hot water faucets in your home, and let the water flow for several minutes before using your washer. This will release any hydrogen gas build–up. Since hydrogen gas is flammable, do not smoke or light an open flame during this time.

Unplug the power cord before servicing your washer.

Do not reach into the appliance when the tumbler is moving.

Do not let children play on or in your washer. The washer door isn’t easily opened from the inside, and a child could be seriously injured if trapped inside.

Do not tamper with the controls.

Do not repair, replace, or service any part of your washer yourself unless you fully understand the recommended user–repair instructions and have the skills to carry them out. Work done by an unauthorized person may void your warranty.

Store laundry detergents and other laundry supplies in a cool, dry place out of children’s reach.

Do not wash or dry items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

Do not use chlorine bleach, ammonia, or acids (such as vinegar or rust remover) in the same wash. Hazardous fumes can form.

Do not machine wash fiberglass materials. Small particles can stick to fabrics washed in subsequent loads and cause skin irritation.

Befor

e disposing of your washer

, remove the door so that children or small animals cannot

get trapped inside.

Do not sit on top of your Washer

Inlet hoses are subject to damage and deterioration over time. Check the hoses periodically for bulges, kinks, cuts, wear or leaks, and replace them every five years.

Ensure pockets are free from small irregularly shaped hard objects or foreign materials, such as coins, knives, pins, etc. These objects could damage your washer.

Do not wash clothing with large buckles, buttons, or other heavy metal.

WARNING

CAUTION

WF218ANB-02240B_EN.indd 4 2008-02-20 ¿ÀÀü 10:30:37

Contents _5

contents

INSTALLING YOUR WASHER

6 Unpacking your washer

6 Overview of your washer

7 Electrical

7 Gr

ounding

7 W

ater

8 Drain facility

8 Flooring

8 Location considerations

8 Alcove or closet installation

Important note to installer

OPERATING INSTRUCTIONS

12 Loading your washer

12 Getting started

WASHING A LOAD OF LAUNDRY

13 Overview of the control panel

14 Child lock

14 Garment+

Detergent use

15 Features

MAINTAINING YOUR WASHER

17 Cleaning the exterior

17 Cleaning the interior

17 Cleaning the dispensers

17 Storing your washer

18 Cleaning the debris filter

TROUBLESHOOTING

19 Check these points if your washer…

21 Information codes

APPENDIX

23 Fabric care chart

24 Helping the environment

24 Declaration of conformity

24 Specifications

25 Cycle chart

WF218ANB-02240B_EN.indd 5 2008-02-20 ¿ÀÀü 10:30:38

6_ Installing your washer

installing your washer

UNPACKING YOUR WASHER

Unpack your Washer and inspect it for shipping damage. Make sure you have received all of the items shown below. If your Washer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG(7267864).

OVERVIEW OF YOUR WASHER

Detergent drawer

Control panel

Door

Hot water supply

hose

Cold water supply hose

Drain Hose

Adjustable legs

( use for the Upper Bolt Hole )

Wrench Bolt hole covers Water Supply Hose Rubber Washers

Hose guide Soundproof Board Scr

WF218ANB-02240B_EN.indd 6 2008-02-20 ¿ÀÀü 10:30:40

ews

Installing your washer _7

BASIC LOCATION REQUIREMENTS

Electrical

• 120 Volt 60 Hz 15 AMP fuse or circuit breaker

• Individual branch circuit serving only your W

asher is recommended.

• Your Washer is equipped with a power cord.

NEVER USE AN EXTENSION CORD.

Grounding

ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet.

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT SAFETY PRECAUTIONS

• To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and

grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.

NEVER CONNECT GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR HOT WATER PIPES.

Water

To correctly fill your Washer in the proper amount of time, water pressure of 20 – 120 psi is required.

Water pressure less than 20 psi may cause water valve failure, ,or may not allow the water valve to shut off completely. Or, it may extend the fill time beyond what your Washer controls allow, resulting in your Washer turning off. A time limit is built into the controls in the event of an internal hose becoming loose and flooding your home.

The water faucets must be within 4 feet/122cm of the back of your W

asher for the inlet hoses

provided with your Washer.

Accessory inlet hoses are available in various lengths up to 10 feet/305cm for faucets that are further away from the back of your Washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible

• Turn off faucets when the washer is not in use.

• Periodically check that there is no leakage fr

om the water inlet hose fittings.

CHECK ALL CONNECTIONS AT THE WATER VALVE AND FAUCET FOR LEAKS.

01 Installing your washer

CAUTION

WARNING

WF218ANB-02240B_EN.indd 7 2008-02-20 ¿ÀÀü 10:30:41

8_ Installing your washer

Drain facility

The recommended height of the standpipe is 18 in/46 cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, your Washer must be installed on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting and soft tile surfaces are contributing factors in vibration and may cause your washer to move slightly during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location considerations

Do not install your washer in areas where water may freeze, since your washer will always maintain some water in its water valve, pump, and hose areas. This can cause damage the belts, the pump, hoses and other components. Operating temperature should be above 60°F/16°C.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides – 1 in / 25 mm

Rear – 4 in / 102 mm

Top – 17 in / 432 mm

Closet Fr

ont – 2 in / 51 mm

If the washer and dryer are installed together, the closet front must have at least 72 in² or 465 cm² of an unobstructed air opening. Your washer alone does not require a specific air opening.

installing your washer

WF218ANB-02240B_EN.indd 8 2008-02-20 ¿ÀÀü 10:30:41

Installing your washer _9

IMPORTANT NOTE TO INSTALLER

Please read the following instructions carefully before installing your Washer.

These instructions should be retained for future reference.

We recommend you hire a professional for installation of this washer.

STEP 1 Assembling the Bottom Cover-Plate

To install the Washing Machine, you have to assemble the soundproof board first.

• If you want to install the Pedestal onto the washing machine, do not install the

soundpr

oof board.

• If the soundproof boar

d has been installed before installing the Pedestal, you will not be

able to install the Pedestal onto the washing machine.

1. Lay the Washing Machine on its side and place the

soundpr

oof board so that the arrow marked on the soundproof board points to the front of the Washing Machine.

2. Insert part ‘A’ of the soundpr

oof board into part ‘B’ at the

bottom of the Washing Machine.

3. Fasten the 4 screws thr

ough the holes on each of the sides

of the soundproof board as shown in the figure.

4. Do not lay the washer on its back or front. It can cause the

oduct damage.

01 Installing your washer

Part B

Part A

WF218ANB-02240B_EN.indd 9 2008-02-20 ¿ÀÀü 10:30:43

+ 19 hidden pages