Samsung WF2124ZB User Manual

WF1124ZA(C/U)

WF1124ZB(C/U)

WF1124XA(C/U)

WF1124XB(C/U)

WF2124ZA(C/U)

WF2124ZB(C/U)

Washing Machine

user manual

This manual is made with 100% recycled paper.

imagine the possibilities

Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at

www.samsung.com/register

WF1124ZAC-03038K-06_EN.indd 1

2012-10-04 10:49:57

features of your new samsung washing machine

Your new washing machine will change the way you feel about doing laundry. From its specialised Eco Bubble function to its energy effi ciency, your new Samsung washing machine has all the benefi ts to make washing laundry as easy and pleasant as possible.

• Features of your new Samsung washing machine

Your new washing machine will change the way you feel about doing laundry. From its specialized Eco Bubble function to its energy effi ciency, your new Samsung washing machine has all the benefi ts to make washing laundry as easy and pleasant as possible.

• Energy Saving

This model offers more effi cient energy use compared to standard A rated machine with the special Bubble generator system and Samsung Inverter motor.

• Eco Bubble Wash

Samsung’s effective Eco Bubble delivers improved cleanliness with advanced fabric care. Eco Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper.

• Less Noise & Vibration

This Samsung washer performs very quietly minimizing noise and vibration with 3D vibration sensors and smart control technology, which enables it to maintain the lowest possible vibration. Thus, the drum keeps perfect balance.

• Quick Wash

No time to waste! Quick Wash program can help your busy life - now you can wash your favorite clothes (up to 2Kg) in 15 minutes!

• Eco Drum Clean

Using Eco Drum Clean helps to keep washing machine clean even without any chemical detergent or bleach. Keep your drum clean and odorless with specialized cleaning program.

• Baby Care

Your Samsung washing machine includes wash programs that add protection to the clothing of children with sensitive skin. These programs reduce skin irritation in children by minimizing detergent residue. In addition, these programs classify laundry into various types and the wash is performed according to the laundry characteristics so that children’s clothes feel refreshingly clean whenever they are put on.

• Wool Certified

The machine has been tested and passed the required Woolmark Company specifi cation for machine washable wool products. This mark is the upgraded certifi cation better than the existing Woolmark, which guarantees not only washing performance but also fabric care for wool products. Fabrics should be washed according to the instructions on the garment label as specifi ed by Woolmark and Samsung.

• Hand Wash

Special care can be determined by the appropriate temperature, the gentle wash action and the appropriate amount of water.

2_ features

WF1124ZAC-03038K-06_EN.indd Sec1:2

2012-10-04 10:50:01

• Delay End

Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of using your washing machine especially when you have to go out.

• Child Lock

The Child Lock function ensures that curious little hands are kept out of your washing machine. This safety feature stops your children from playing with the operation of the washing machine, and alerts you when it is activated.

• Digital Graphic Display (selected models)

The Digital Graphic Display control panel is clear and easy to use for minimum fuss and hassle. And while it is easy to operate, the Digital Graphic Display enables you to make quick and accurate adjustments to your wash for excellent washing results.

• LCD Display (selected models)

LCD display control panel is clear and easy to use for minimum fuss and hassle. And while it is easy to operate, the Display enables you to make quick and accurate adjustments to your wash for excellent washing results.

This manual contains important information on the installation, use, and care of your new Samsung washing machine. Refer to it for descriptions of the control panel, instructions on how to use the washing machine, and tips for making the most of its state-of-the-art features and functions. The “Troubleshooting and information codes” section on page 37 tells you what to do if something goes wrong with your new washing machine.

features _3

WF1124ZAC-03038K-06_EN.indd Sec1:3

2012-10-04 10:50:01

safety information

Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many benefi ts and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Please read this manual thoroughly to ensure that you know how to safely and effi ciently operate the extensive features and functions of your new appliance and retain it at a safe place near the appliance for your future reference. Use this appliance only for its intended purpose as described in this instruction manual.

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your washer.

Because these following operating instructions cover various models, the characteristics of your washer may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service center or fi nd help and information online at www.samsung.com.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

Hazards or unsafe practices that may result in severe personal injury,

WARNING death and/or property damage.

Hazards or unsafe practices that may result in personal injury and/or

CAUTION property damage.

To reduce the risk of fi re, explosion, electric shock, or personal injury CAUTION when using your washer, follow these basic safety precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service centre for help.

Note

These warning signs are here to prevent injury to you and others. Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

As with any equipment using electricity and moving parts, potential hazards exist. To safely operate this appliance, become familiar with its operation and exercise care when using it.

4_ safety information

WF1124ZAC-03038K-06_EN.indd Sec10:4

2012-10-04 10:50:01

Do not let children (or pets) play on or in your washing machine. The washing machine door does not open easily from the inside, and children may be seriously injured if trapped inside.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or WARNING mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualifi ed person in order to avoid a hazard.

This appliance should be positioned to be accessible to the power plug, the water supply tabs and the drain pipes.

For washing machines with ventilation openings in the base, ensure that the opening is not obstructed by carpet or any other obstacles.

Use the new hose-sets and old hose-sets should not be reused.

INSTRUCTION ABOUT THE WEEE MARK

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government offi ce, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

safety information _5

WF1124ZAC-03038K-06_EN.indd Sec10:5

2012-10-04 10:50:01

safety information

WARNING SEVERE WARNING SIGNS FOR INSTALLATION

The installation of this appliance must be performed by a qualifi ed technician or service company.

-Failure to do so may result in electric shock, fi re, an explosion, problems with the product, or injury.

The appliance is heavy, take care upon lifting it

Plug the power cord into an AC 220-240V / 50Hz wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.

-Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fi re.

-Ensure that the power voltage, frequency and current are the same as those of the product specifi cations. Failure to do so may result in electric shock or fi re. Plug the power plug into the wall socket fi rmly.

Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.

-Unplug the power plug and clean it with a dry cloth.

-Failure to do so may result in electric shock or fi re.

Plug the power plug into the wall socket in the right direction so that the cord runs towards the fl oor.

-If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fi re.

Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.

- If a child places a bag over its head, it may result in suffocation.

When the appliance or power plug or power cord is damaged, contact your nearest service centre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

-This may result in electric shock, fi re, an explosion, or problems with the product.

-Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.

Do not install this appliance near a heater, infl ammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

Do not install this appliance in a location of low temperature - Frost may cause tubes to burst.

Do not install this appliance in a location where gas may leak. - This may result in electric shock or fi re.

Do not use an electric transformer.

- It may result in electric shock or fi re.

Do not use a damaged power plug, damaged power cord or loose wall socket. - This may result in electric shock or fi re.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

6_ safety information

WF1124ZAC-03038K-06_EN.indd Sec2:6

2012-10-04 10:50:01

Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.

- This may result in electric shock or fi re.

Do not pull the power cord, when unplugging the power plug.

-Unplug the power plug by holding the plug.

-Failure to do so may result in electric shock or fi re.

Do not lay the power cord and tubes where you may fall over them.

CAUTION CAUTION SIGNS FOR INSTALLATION

This appliance should be positioned in such a way that it is accessible to the power plug. - Failure to do so may result in electric shock or fi re due to electric leakage.

Install your appliance on a level and hard fl oor that can support its weight.

-Failure to do so may result in abnormal vibrations, moves, noise, or problems with the product.

WARNING SEVERE WARNING SIGNS FOR USING

If the appliance is fl ooded, Turn off the water & power supply immediately and contact your nearest service centre.

-Do not Touch the power plug with wet hands.

-Failure to do so may cause electric shock.

If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact your nearest service centre.

- Failure to do so may result in electric shock or fi re.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord.

-Do not use a ventilating fan.

-A spark may result in an explosion or fi re.

Do not let children play in or on the washer. In addition, when disposing of the appliance, remove the washer door lever.

- If trapped inside, the child may become trapped and suffocate to death.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it.

safety information _7

WF1124ZAC-03038K-06_EN.indd Sec2:7

2012-10-04 10:50:02

safety information

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other fl ammable or explosive substances.

- This may result in electric shock, fi re or an explosion.

Do not open the washer door by force while it is operating (high-temperature washing/ drying/spinning).

- Water fl owing out of the washer may result in burns or cause the fl oor to be slippery.

This may result in injury.

- Opening the door by force may result in damage to the product or injury.

Do not insert your hand under the washer. - This may result in injury.

Do not touch the power plug with wet hands. - This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

-Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fi re.

Do not let children or infi rm persons use this washer unsupervised. Do not let children climb in the appliance.

- Failure to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating. - This may result in injury.

Do not unplug the appliance by pulling at the power cord, always grip plug fi rmly and pull straight out from the outlet.

- Damage to the cord may cause short-circuit, fi re and/or electric shock.

Do not attempt to repair, disassemble, or modify the appliance yourself.

-Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.

-When repairing or reinstalling the appliance is required, contact your nearest service centre.

-Failure to do so may result in electric shock, fi re, problems with the product, or injury.

If the water supply hose comes loose from the Water tap and fl oods the appliance, unplug the power plug.

- Failure to do so may result in electric shock or fi re.

Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm.

- Failure to do so may result in electric shock or fi re.

8_ safety information

WF1124ZAC-03038K-06_EN.indd Sec2:8

2012-10-04 10:50:02

CAUTION CAUTION SIGNS FOR USING

When the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp and soft cloth. - Failure to do so may result in discolouration, deformation, damage or rust.

The front glass may be broken by a strong impact. Take care when using the washer. - When the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the Water Tap slowly.

Open the Water Tap slowly after a long period of non-use.

-The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage.

If a drain error occurs during an operation, check if there is a draining problem.

-If the washer is used when it is fl ooded because of a draining problem, it may result in electric shock or fi re due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the door.

-If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in water leakage.

Ensure that the Water Tap is turned off when the washer is not being used.

-Ensure that the screw on the water supply hose connector is properly tightened.

-Failure to do so may result in property damage or injury.

Take care that the rubber seal and the front door glass are not contaminated by a foreign substance (e.g. waste, thread, hair, etc.)

-If a foreign substance is caught in the door or the door is not completely closed, it may cause a water leakage.

Open the Water Tap and check if the water supply hose connector is fi rmly tightened and that there is no water leaking before using the product.

-If the screws or the water supply hose connector are loose, it may result in water leakage.

The product you have purchased is designed for domestic use only.

The use for business purposes qualifi es as product misuse. In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.

safety information _9

WF1124ZAC-03038K-06_EN.indd Sec2:9

2012-10-04 10:50:02

safety information

Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, fi re, problems with the product, or injury.

Do not spray volatile material such as insecticide onto the surface of the appliance.

-As well as being harmful to humans, it may also result in electric shock, fi re or problems with the product.

Do not place an object that generates a electromagnetic fi eld near the washer. - This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water.

- This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a special program for washing these items.

-Do not wash thick, hard mats even if the washer mark is on the care label.

-This may result in injury or damage to the washer, walls, fl oor or clothing due to abnormal vibrations.

*Woollen Bedding, rain covers, fi shing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed. - This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot. - This may result in burns.

Do not insert your hand into the detergent box after opening it.

-This may result in injury as your hand may be caught by the detergent input device. Do not place any objects (such as shoes, food waste, animals) other than laundry into the washer.

-This may result in damage to the washer, or injury and death in the case of pets due to the abnormal vibrations.

Do not press the buttons using sharp objects such as pins, knifes, fi ngernails, etc. - This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long periods of time.

-This may cause the tub to rust.

-If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the surface and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.

-This may result in spontaneous combustion or ignition due to the heat of the oxidation of the oil.

Do not use hot water from water cooling/heating devices. - This may result in problems with the washer.

10_ safety information

WF1124ZAC-03038K-06_EN.indd Sec2:10

2012-10-04 10:50:02

Do not use natural hand-washing soap for the washer.

-If it hardens and accumulates inside the washer, it may result in problems with the product, discolouration, rust or bad odors.

Do not wash large laundry items such as Bedding in the washing net.

-Place socks and brassieres into the washing net and wash them with the other laundry.

-Failure to do so may result in injury due to abnormal vibrations.

Do not use hardened detergent.

- If it accumulates inside the washer, it may result in water leakage.

For washing machines with ventilation openings in the base, ensure that the opening is not obstructed by carpet or any other obstacles.

Make sure that the pockets of all clothing to be washed are empty.

-Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance.

Do not wash clothing with large buckles, buttons, or other heavy metal.

WARNING SEVERE WARNING SIGNS FOR CLEANING

Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance.

- This may result in discolouration, deformation, damage, electric shock or fi re.

Before cleaning or performing maintenance, unplug the appliance from the wall socket. - Failure to do so may result in electric shock or fi re.

safety information _11

WF1124ZAC-03038K-06_EN.indd Sec2:11

2012-10-04 10:50:02

contents

SETTING UP YOUR WASHING MACHINE

13

WASHING A LOAD OF LAUNDRY

21

CLEANING AND MAINTAINING YOUR WASHING MACHINE

32

TROUBLESHOOTING AND INFORMATION CODES

37

CALIBRATING YOUR WASHING MACHINE

39

CYCLE CHART

40

APPENDIX

41

12_ contents

13Checking the parts

14Meeting installation requirements

14Electrical supply and grounding

14Water Supply

15Drain

15	Flooring
15	Surrounding temperature
15	Alcove or closet installation
15	Installing your washing machine

21Washing for the fi rst time

21Basic instructions

22Using the control panel

25Eco Display (selected LCD models)

25Child lock

25Sound off

26Delay end

26My cycle

27Eco Bubble

28Washing clothes using the cycle selector

29Washing clothes manually

29Laundry guidelines

30Detergent and additives information

30Which detergent to use

31Detergent drawer

31Liquid Detergent (Selected models)

32Eco Drum Clean

33Draining the washing machine in an emergency

34Cleaning the debris fi lter

34Cleaning the exterior

35Cleaning the detergent drawer and drawer recess

35Cleaning the water hose mesh fi lter

36Repairing a frozen washing machine

36Storing your washing machine

37Check these points if your washing machine...

38Information codes

39Calibration mode

40Cycle chart

41Fabric care chart

41Protecting the environment

41Declaration of conformity

42Specifi cations

43Sheet of household washing machines (EU Only)

WF1124ZAC-03038K-06_EN.indd Sec3:12

2012-10-04 10:50:02

setting up your washing machine

Be sure to have your installer follow these instructions closely so that your new washing machine works properly and so that you’re not at risk of injury when doing laundry.

CHECKING THE PARTS

Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below. If your washing machine was damaged during shipping, or if you do not have all of the parts, contact Samsung Customer Service or your Samsung dealer.

	Work top
Release lever
Detergent drawer
Control panel	Plug

Door

	Drain hose
	Emergency drain
	tube
Levelling feet
Tub	Debris filter
	Filter Cover

UP SETTING 01

			Hot		Liquid
Spanner	* Bolt hole	Cold	(Selected	Hose guide	detergent box
	covers		model)		(Selected
		Water supply hose			model)

* Bolt hole covers : The number of bolt hole covers depends on the model (3~6 covers).

setting up your washing machine _13

WF1124ZAC-03038K-06_EN.indd Sec4:13

2012-10-04 10:50:02

setting up your washing machine

MEETING INSTALLATION REQUIREMENTS

Electrical supply and grounding

Never use an extension cord.

WARNING Use only the power cord that comes with your washing machine.

When preparing for installation, ensure that your power supply offers:

•AC 220-240 V / 50 Hz fuse or circuit breaker

•Individual branch circuit serving only your washing machine

Your washing machine must be grounded. If your washing machine malfunctions or breaks down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current.

Your washing machine comes with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Improperly connecting the equipment-grounding conductor can result in electric shock. Check with a qualifi ed electrician or serviceman if you are unsure if the washing machine is properly grounded. Do not modify the plug provided with the washing machine. If it does not fi t the outlet, have a proper outlet installed by a qualifi ed electrician.

Water Supply

Your washing machine will fi ll properly when your water pressure is 50 kPa ~ 800 kPa. Water pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut off completely. Or, it may take the washing machine longer to fi ll than what the controls allow, resulting in your washing machine turning off. (A fi ll-time limit, designed to prevent overfl ows/ fl ooding if an internal hose becomes loose, is built into the controls.)

The water taps must be within 120cm of the back of your washing machine for the provided inlet hoses provided to reach your washing machine.

Most plumbing supply stores sell inlet hoses of various lengths up to 305 cm long.

You can reduce the risk of leaks and water damage by:

•Making water taps easily accessible.

•Turning off taps when the washing machine is not in use.

•Periodically checking for leaks at water inlet hose fi ttings.

Before using your washing machine for the fi rst time, check all connections at the water WARNING valve and taps for leaks.

14_ setting up your washing machine

WF1124ZAC-03038K-06_EN.indd Sec4:14

2012-10-04 10:50:03

Drain

Samsung recommends a standpipe height of 65cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, your washing machine must be installed on a solidly constructed fl oor. Wood fl oors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are contributing factors to vibrations and the tendency for your washing machine to move slightly during the spin cycle.

Never install your washing machine on a platform or poorly supported structure.

Surrounding temperature

Do not install your washing machine in areas where water may freeze, since your washing machine always retains some water in its water valve, pump, and hose areas. Frozen water in the lines can cause damage to belts, the pump, and other components.

Alcove or closet installation

To operate safely and properly, your new washing machine requires minimum clearances of:

Sides – 25 mm	Rear – 50 mm
Top – 25 mm	Front – 465 mm

If both the washing machine and a dryer are installed together, the front of the alcove or closet must have at least 465 mm unobstructed air opening. Your washing machine alone does not require a specifi c air opening.

INSTALLING YOUR WASHING MACHINE

STEP 1

Selecting a location

Before you install the washing machine, make sure the location:

•Has a hard, level surface without carpeting or fl ooring that may obstruct ventilation

•Is away from direct sunlight

•Has adequate ventilation

•Will not be freezing (below 0 ˚C)

•Is away from heat sources such as oil or gas

•Has enough space so that the washing machine doesn’t stand on its power cord

setting up your washing machine _15

UP SETTING 01

WF1124ZAC-03038K-06_EN.indd Sec4:15

2012-10-04 10:50:03

setting up your washing machine

STEP 2

Removing the shipping bolts

Before installing the washing machine, you must remove all shipping bolts from the back of the unit.

1. Loosen all the bolts with the supplied wrench.

Option

2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.	Option

3. Fill the holes with the supplied plastic covers.

Option

4.Store the shipping bolts away safely in case you have to move the washing machine in the future.

Packaging materials can be dangerous to children; keep all packaging material (plastic WARNING bags, polystyrene, etc.) well out of the reach of children.

16_ setting up your washing machine

WF1124ZAC-03038K-06_EN.indd Sec4:16

2012-10-04 10:50:03

STEP 3

Adjusting the Levelling feet

When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible.

1.Slide the washing machine into position.

2.Level your washing machine by turning the

levelling feet in and out as necessary by hand.

3.When your washing machine is level, tighten the nuts using the wrench supplied with your washing machine.

UP SETTING 01

STEP 4

Connecting the water and drain

Connecting the water supply hose

1. Take the L-shaped arm fi tting for the cold water

Option

supply hose and connect it to the cold water supply intake on the back of the machine. Tighten by hand.

The water supply hose must be connected to the washing machine at one end and to the water tap at the other. Do not stretch the water supply hose. If the hose is too short, replace the hose with a longer, high pressure hose.

2.Connect the other end of the cold water supply hose to your sink’s cold water tap and tighten it by hand. If necessary, you can reposition the

water supply hose at the washing machine end by loosening the fi tting, rotating the hose, and retightening the fi tting.

For selected models with an additional hot water intake:

1.Take the red L-shaped arm fi tting for the hot water supply hose and connect it to the hot water supply intake on the back of the machine. Tighten by hand.

2.Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten it by hand.

3.Use a Y-piece if you only want to use cold water.

setting up your washing machine _17

WF1124ZAC-03038K-06_EN.indd Sec4:17

2012-10-04 10:50:03

setting up your washing machine

Connecting the water supply hose

1. Remove the adaptor from the water supply hose.

		Adaptor
		Water supply
		hose
	2. First, using a ‘+’ type screwdriver, loosen the four screws
	on the adaptor. Next, take the adaptor and turn part (2)	1
	following the arrow until there is a 5 mm gap.
		5 mm
		2

3. Connect the adaptor to the water tap by tightening the screws fi rmly while lifting the adaptor upwards.

Turn part (2) following the arrow and connect (1) and (2).

Water tap

1

2

4. Connect the water supply hose to the adaptor. When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.

After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.

3

5. Connect the other end of the water supply hose to the inlet water valve at the rear of the washing machine. Screw the

hose clockwise all the way in.	Option

18_ setting up your washing machine

WF1124ZAC-03038K-06_EN.indd Sec4:18

2012-10-04 10:50:03

	6. Turn on the water supply and ensure that no water leaks
	from the water valve, tap or adaptor. If there is a water
	leaks, repeat the previous steps.
	Do not use your washing machine if there is a water leak.
	WARNING This may cause electric shock or injury.

• If the water tap has a screw type tap, connect the water supply hose to the tap as shown.

UP SETTING 01

Use the most conventional type of tap for the water supply. In case the tap is square or too big, remove the spacing ring before inserting the tap into the adaptor.

Connecting the Aqua Hose (Selected models)

The Aqua Hose was invented for perfect leakage protection. It is attached to the water supply hose and automatically cuts off the water fl ow if the hose is damaged. It also displays a warning indicator.

•Connect the water supply hose to the tap as shown.

setting up your washing machine _19

WF1124ZAC-03038K-06_EN.indd Sec4:19

2012-10-04 10:50:04

setting up your washing machine

Connecting the drain hose

The end of the drain hose can be positioned in three ways:

1.Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.

2.ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.

Drain hose

60 ~ 90 cm

Hose guide

3.ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm.

The standpipe drain requires;

•minimum diameter 5 cm.

•minimum carry-away capacity 60 liter per minute.

60 ~ 90 cm

STEP 5

Powering your washing machine

Plug the power cord into a wall sockets, an AC 220-240 V / 50 Hz approved electrical outlet protected by a fuse or circuit breaker. (For more information on electrical and grounding requirements, see page 14.)

STEP 6

Select the Language (selected LCD models)

At the beginning setting (After power on), the “Language setting” message appears on the display. you can select one language among English, French, Dutch, German, Italian, or Spanish. (Portuguese, Danish, Finnish, Norwegian, or Swedish.)

* Language selections can be changed according to derived models.

1. Push the Rinse button to choose a language.

2. Push the Spin button to set the chosen language.

To reselect the language, press the Rinse and Spin buttons simultaneously for 3 seconds.

The LCD display Language may differ depending on the model.

These languages are available only for WF1124 series.

These languages are available only for WF2124 series.

20_ setting up your washing machine

WF1124ZAC-03038K-06_EN.indd Sec4:20

2012-10-04 10:50:04

washing a load of laundry

With your new Samsung washing machine, the hardest part of doing laundry will be deciding which load to wash fi rst.

WASHING FOR THE FIRST TIME

Before washing laundry for the fi rst time, you must run a complete empty cycle (i.e. no laundry).

1.	Press the Power button.
2.	Add a little detergent to the detergent compartment in
	the detergent drawer.
3.	Turn on the water supply to the washing machine.
4.	Press the Start/Pause button.
	This will remove any water that might be left over in the
	machine from the manufacturer’s test run.

Compartment : Detergent for prewash, or starch.

Compartment : Detergent for the main wash, water softener, pre-soaking agent, bleach and stain removal product.

To use liquid detergent, use the liquid detergent box (refer to page 31 of the manual for the corresponding model). Do not add powdered detergent into the liquid detergent box.

Compartment : Additives, e.g. fabric softener or former (fi ll no higher than lower edge (MAX) of “A”).

BASIC INSTRUCTIONS

1. Load your laundry into the washing machine.

Do not overload the washing machine. To determine the load capacity for each type of WARNING laundry, refer to the chart on page 30.

• Make sure that laundry is not caught in the door, as this may cause a water leak.

•Washing detergent may remain in the front rubber part of the washer after a wash cycle. Remove any remaining detergent, as they may cause a water leak.

•Do not touch the door glass while your washing machine is running or it may be hot.

•Do not open the detergent drawer or the debris fi lter while your washing machine is running or you might be exposed to hot water or steam.

•Do not wash water-proofed items in normal cycle except outdoor care program.

2.Close the door until it latches.

3.Turn the power on.

4.Add detergent and additives to the dispenser drawer.

5.Select the appropriate cycle and options for the load.

The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.

6.Press the Start/Pause button.

washing a load of laundry _21

LAUNDRY OF LOAD A WASHING 02

WF1124ZAC-03038K-06_EN.indd Sec5:21

2012-10-04 10:50:05

washing a load of laundry

USING THE CONTROL PANEL

1

2

3

4

5

6

7

8

9

10

11

12

13

1

2

3

4

5

6

7

8

9

10

11

12

13

Select the tumble pattern and spin speed for the cycle.

For detailed information, refer to “Washing clothes using the cycle selector”. (see page 28)

Cotton - For average or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc.

Synthetics - For averagely or lightly soiled blouses, shirts, etc., made of polyester (diolen, trevira), polyamide (perlon, nylon) or other similar blends.

Denim - A higher water level in the main wash and extra rinse ensure that no washing powder remains that may mark your clothing. Bedding - For bed spread, bed sheet, Bedding cover etc.

	Wash under 2.5kg and only 1 kind of Bedding to achieve the best
1 CYCLE SELECTOR	result.

Dark Garment - Additional rinses and reduced spinning ensure that your favourite dark clothes are washed gently and rinsed thoroughly.

Daily Wash - Use for everyday items such as underwear and shirts. Eco Drum Clean - Use for drum cleaning. It cleanses dirt and bacteria of drum. Regular use (after every 40 washes) is recommended. No detergent or bleach needed.

Super Eco Wash - Low temperature Eco Bubble ensures that you achieve perfect wash results while allowing effective energy saving. Outdoor Care - Use for outdoor wear such as mountain clothes, skiwear, and sports wear. Fabrics include functional technology fi nishes and fi bers such as spandex, stretch, and micro-fi ber.

Baby Care - High temperature wash and extra rinses ensure that no washing powder remains to mark your thin clothes.

22_ washing a load of laundry

WF1124ZAC-03038K-06_EN.indd Sec5:22

2012-10-04 10:50:05

Wool - Only for machine-washable wool. A load should be less than 2.0 kg.

•The wool course washes the laundry using gentle cradling actions. During the wash, the gentle cradling and soaking actions are continued to protect the wool fi bers from shrinkage / distortion and for a super gentle clean. This stop operation is not a problem.

•Neutral detergent is recommended for wool course, for improved washing results and for improved care of the wool fi bers.

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine-washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine, M1108 (Certifi cate Number issued by I.W.S. Nominee Co., Ltd.)

			Hand Wash - A very light wash cycle as gentle as a hand wash.
			Spin - Performs an additional spin cycle to remove more water.
			Rinse + Spin - Use for a load that needs rinsing only or to add rinse-
			added fabric softener to a load.
	2	LCD DISPLAY /	Displays the remaining wash cycle time, all cycle information, and error
		DIGITAL GRAPHIC
			messages.
		DISPLAY
	3	TEMP SELECTION	Press this button repeatedly to cycle through the available water
		BUTTON	temperature options: (Cold Water , 20 ˚C, 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
	4	RINSE SELECTION	Press this button to add additional rinse cycles. The maximum number
		BUTTON	of rinse cycles is fi ve.
			Press the button repeatedly to cycle through the available speeds for the
			spin cycle.
		SPIN SELECTION	WF1124 / WF2124			, , 400, 800, 1000, 1200, 1400 rpm
	5		“No spin ” - The laundry remains in the drum and no spin cycle is
		BUTTON
			performed after the fi nal drain.
			“Rinse Hold	” - The laundry remains soaking in the fi nal rinse water.
			Before the laundry can be unloaded, either a Drain or Spin cycle must be
			performed.
			Press this button repeatedly to cycle through the options:
			Soak  Intensive  Prewash  Soak + Intensive  Soak + Prewash 
			Intensive + Prewash  Soak + Intensive + Prewash  off
			“Prewash	”: Press this button to select pre-wash. Pre-wash is only available
			with: Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Super
			Eco Wash, Baby Care.
			“Soak ”: Use this option to effectively remove stains from your laundry
	6	OPTION SELECTION	by soaking your laundry.
		BUTTON	• The Soak function is performed 13 minutes into the wash cycle.

•The Soak function continues for 30 minutes with six cycles, where one cycle is a soak cycle that spins for 1 minute and stands still for 4 minutes.

•The Soak function is only available for the following wash programs: Cotton, Synthetics, Denim, Bedding, Daily Wash, Super Eco Wash ,

Baby Care.

“Intensive ”: Press this button when the laundry is heavily soiled and needs to be washed intensively. The cycle time is increased for each cycle.

washing a load of laundry _23

LAUNDRY OF LOAD A WASHING 02

WF1124ZAC-03038K-06_EN.indd Sec5:23

2012-10-04 10:50:06

washing a load of laundry

			Eco Bubble selection is turned on as a default. Press the Eco Bubble
			option button once to deselect and the Bubble Generator OFF (shown
			on the panel), press it again to turn the function back ON.
		ECO BUBBLE	• Some wash cycles must have Eco Bubble option ON (will show on
	7		the panel, and the Generator will turn on automatically).
		SELECTION BUTTON	• Other wash cycles do not need this option and automatically turn the
			Generator OFF.
			• On many cycles, you can manually adjust this option, which will
			visibly affect wash time on the panel to achieve results (please see
			page 27 for more information).
			Press this button to prepare your laundry so that it can be easily ironed by
			reducing the wrinkles during the spin cycle.
			• Easy Iron is only available for the following wash programs: Cotton,
		EASY IRON	Synthetics, Denim, Bedding, Dark garment, Daily wash, Super Eco
	8		Wash, Baby Care
		SELECTION BUTTON
			• When Easy Iron is selected, you can set the spin cycle speed up to
			800 rpm. (If you select Easy Iron with a spin cycle speed set to higher
			than 800 rpm, the spinning speed is automatically changed to 800
			rpm.)
			For lightly soiled garments and less than 2kg laundry that you require
			quickly. It takes about minimum 15 minute, but can vary from the
			indicated values depending on water pressure, water hardness, water
			inlet temperature, room temperature, type and amount of washing and
	9	QUICK WASH	degree of soiling, utilized detergent unbalaced load, fl uctuation in the
		SELECTION BUTTON	electricity supply and extra options selected.
			• Press this button repeatedly to choose cycle time: 15min  20min 
			30min  40min  50min  1hr  Off
			Powdered/Liquid detergent should be under 20g(for 2kg load) or
			WARNING detergent may remain on the clothes.
		DELAY END	Press this button repeatedly to cycle through the available Delay End
	10		options (from 3 hours to 19 hours in one hour increments).
		SELECTION BUTTON	The hour displayed indicates the time when the wash cycle will be fi nished.
	11	START/PAUSE	Press to pause and restart a cycle.
		SELECTION BUTTON
	12	MY CYCLE	Choose your favorite cycle including temperature, spin, soil level, option, etc.
		SELECTION BUTTON
			Press it once to turn your washing machine on, press it again to turn
	13	POWER BUTTON	your washing machine off.
			If the washing machine is left on for more than 10 minutes without any

buttons being touched, the power automatically turns off.

24_ washing a load of laundry

WF1124ZAC-03038K-06_EN.indd Sec5:24

2012-10-04 10:50:06

Eco Display (selected LCD models)

This function decreases the brightness of the LCD backlight if you do not use the Cycle Selector or press any of the buttons for the pre-determined period of time.

Operating Mechanism

If you press the Start/Pause button, the Eco Display function automatically runs after 1 minute. If you use the Cycle Selector or press any button, the Eco Display function is cancelled.

The Eco Display function will start automatically unless you use the Cycle Selector or press the button within 1 minute.

Unless the Start/Pause button is pressed, the Eco Display function is not activated.

Child lock

The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed.

Activating/Deactivating

If you want to activate or deactivate the Child Lock function, press the Temp and Rinse buttons at the same time for 3 seconds. “Child Lock ” will be lit when this feature is activated.

When the Child Lock function is activated, only the Power button works. The Child Lock function remains on even after the power is turned on and off or after the disconnecting and reconnecting the power cord.

LAUNDRY OF LOAD A WASHING 02

3 SEC.

3 SEC.

Sound off

The Sound Off function can be selected during all courses. When this function is selected, sound is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is retained.

Activating/Deactivating

If you want to activate or deactivate the Sound Off function, press the Spin and Option buttons at the same time for 3 seconds. The “Sound Off ” will be lit when this feature is activated.

			3 SEC.		3 SEC.

washing a load of laundry _25

WF1124ZAC-03038K-06_EN.indd Sec5:25

2012-10-04 10:50:06

washing a load of laundry

Delay end

You can set the washing machine to fi nish your wash automatically at a later time, choosing a delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at which the wash will be fi nished.

1.Manually or automatically set your washing machine according to the type of laundry you are washing.

2.Press the Delay End button repeatedly until the delay time is set.

3.Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will begin counting down until it reaches the set time.

4.To cancel a Delay End function, press the Power button and then turn the washing machine on again.

My cycle

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button convenience.

By pushing the My Cycle button, press the My Cycle button to load and use the saved My Cycle options. The “My Cycle” light will indicate activation. Also, the chosen course and option lights will fl icker.

You can set all options as follows in the My Cycle mode.

1.Turn the water supply on.

2.Press the Power button.

3.Select cycle using the Cycle Selector.

4.After cycle selection, set each option.

See the “Cycle Chart” on page 40 for available option settings with each cycle.

5.You can then store the selected cycle and options by pressing and holding the My Cycle button for longer than 3 seconds in My Cycle mode. The cycle and options you select will be displayed the next time you choose the My Cycle function.

You can change the My Cycle settings by repeating the same process above.

The last used setting will be displayed the next time you choose the My Cycle function.

If you press My Cycle and release it within 3 seconds, the previously saved course and options appear. If you press and hold My Cycle for 3 second or longer, the currently set course and options are saved and the LED blinks for 3 seconds.

26_ washing a load of laundry

WF1124ZAC-03038K-06_EN.indd Sec5:26

2012-10-04 10:50:07

Eco Bubble

Eco Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper.

The bubble function is available in all courses except for Eco Drum Clean course and the function availability is as follows.

	Course	Bubble function	Canceling the bubble function
	Cotton, Synthetics, Denim, Bedding,		Available
	Dark Garment, Daily Wash
		Available
	Super Eco Wash, Outdoor Care,		Not available
	Baby Care, Wool, Hand Wash
	Eco Drum Clean	Not available	-

•A different bubble function may be applied depending the course.

Eco Bubble selection is default. Press it once to deselect bubble option, press it again to select bubble option.

1.Open the door, place the laundry inside the wash tub and close the door.

2.Press the Power button.

3.Select a function.

4.Place the appropriate amount of detergent and fabric

softener into the corresponding compartments depending on the amount of laundry and close the detergent drawer.

• Add the appropriate amount of detergent into the detergent compartment , and add the fabric softener to softener compartment just under the fi ber softener base line (MAX) of “A”).

•When the Prewash course is selected, add detergent into the prewash compartment as well.

•To use liquid detergent, leave the liquid detergent box in the drawer(refer to “Liquid Detergent” section on page 31).

Do not add powdered detergent into the liquid detergent box.

5.Press the Start/Pause button.

•Press the Start/Pause button to start the wash.

•The amount of the laundry is automatically detected and the laundry is washed.

•Once a washing machine operation begins, you cannot add or select the bubble function.

• Enough bubbles are generated with the specifi ed amount of detergent.

•Please clean the Debris fi lter frequently. Periodic cleaning helps generate suffi cient bubbles.

•Depending on the detergent and the laundry, the bubbles may be absorbed and seem like a small quantity.

•Although bubbles are generated once the wash begins, it may take several minutes for users to see them.

washing a load of laundry _27

LAUNDRY OF LOAD A WASHING 02

WF1124ZAC-03038K-06_EN.indd Sec5:27

2012-10-04 10:50:08

washing a load of laundry

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.

1.Turn on your sink’s water tap.

2.Press the Power button.

3.Open the door.

4.Load the articles one at a time loosely into the drum, without overfi lling it.

5.Close the door.

6.Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate compartments.

Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Super Eco Wash, Baby care cycles. It is only necessary if your clothing is heavily soiled.

7.Use the Cycle Selector to select the appropriate cycle according to the type of material: Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Super Eco Wash, Outdoor Care, Baby Care, Wool, Hand Wash. The relevant indicators will illuminate on the control panel.

8.At this time, you can control the wash temperature, the amount of rinses, the spinning speed, and the delay time by pressing the appropriate option button.

9.Press the Start/Pause button and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.

Pause Option

Within 5 minutes of starting a wash, it is possible to add/remove laundry items. 1. Press the Start/Pause button to unlock the door.

The door cannot be opened when the water is too HOT or the water level is too HIGH.

2. After closing the door, press the Start/Pause button to restart the wash.

When the cycle is finished:

After the total cycle has fi nished, the power will turn off automatically.

1.Open the door.

2.Remove laundry.

28_ washing a load of laundry

WF1124ZAC-03038K-06_EN.indd Sec5:28

2012-10-04 10:50:08

Washing clothes manually

10. Press the Delay End button repeatedly to cycle through the available Delay End options (from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at which the wash will be fi nished.

You can wash clothes manually without using the Cycle Selector.
1.	Turn the water supply on.
2.	Press the Power button on the washing machine.
3.	Open the door.	02
4.	Load the articles loosely into the drum one at a time, without overfi lling it.
		WASHING
7.	Press the Temp button to select the temperature. (Cold water, 20 ˚C, 30 ˚C, 40 ˚C, 60 ˚C, 95
5.	Close the door.
6.	Add detergent and, if necessary, softener or prewash detergent, into the appropriate
	compartments.
	˚C)	A
		LOAD
8.	Press the Rinse button to select the required number of rinse cycles.
	The maximum number of rinse cycles is fi ve.
	The wash duration is increased accordingly.	OF
9.	Press the Spin button to select the spin speed.( : No Spin)
		LAUNDRY

11. Press the Start/Pause button and the machine will begin the cycle.

LAUNDRY GUIDELINES

Follow these simple guidelines for the cleanest laundry and the most effi cient wash.

Always check the Care label on clothing before washing.

Sort and wash your laundry according to the following criteria:

•Care Label: Sort laundry into cottons, mixed fi bres, synthetics, silks, wools and rayons.

•Colour: Divide whites and colours. Wash new colour items separately.

•Size: Placing items of different sizes in the same load will improve the wash action.

•Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new woollen items, curtains and silk articles. Check the labels on the items you are washing or refer to the fabric care chart in the appendix.

Emptying pockets

Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects, such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash clothing with large buckles, buttons, or other heavy metal objects.

Metal on clothing may damage your clothing as well as the tub. Turn clothing with buttons and embroidered clothes inside out before washing them. If zips of pants and jackets are open while washing, the spin basket may be damaged. Zips should be closed and fi xed with a string before washing.

Clothing with long strings may become entangled with other clothes damaging them. Be sure to fi x the strings before starting the wash.

Prewashing cotton

Your new washing machine, combined with modern detergents, will give perfect washing results, thus saving energy, time, water and detergent. However, if your cotton is particularly dirty, prewash with a protein-based detergent.

washing a load of laundry _29

WF1124ZAC-03038K-06_EN.indd Sec5:29

2012-10-04 10:50:08

washing a load of laundry

Determining the load capacity

Do not overload the washing machine or your laundry may not wash properly. Use the chart below to determine the load capacity for the type of laundry you are washing.

Fabric Type	Load Capacity
Model	WF1124 / WF2124
Cotton
- average/lightly soiled	12.0 kg
- heavily soiled
Synthetics	5.0 kg
Denim	3.0 kg
Bedding	2.5 kg
Outdoor Wear	2.0 kg
Wool	2.0 kg

• When the laundry is unbalanced (“UE” lights up on the display), redistribute the load. If the laundry is unbalanced, the spin effi ciency may be degraded.

•When washing Bedding or Bedding cover, the wash time may be lengthened or the spin effi ciency may be degraded.

•For Bedding or Bedding cover, the recommended load capacity is 2.5 kg or less.

Make sure to insert brassieres (water washable) into a laundry net (to be purchased additionally).

• The metal parts of the brassieres may break through the material and damage the laundry. Therefore make sure to place them inside a fi ne laundry net.

• Small, light clothing such as socks, gloves, stockings and handkerchiefs may become caught around the door. Place them inside a fi ne laundry net.

Do not wash the laundry net by itself without other laundry. This may cause abnormal CAUTION vibrations that could move the washing machine and cause an accident resulting in

injury.

DETERGENT AND ADDITIVES INFORMATION

Which detergent to use

The type of detergent you should use is based on the type of fabric (cotton, synthetic, delicate items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry detergent, which is designed for automatic washing machines.

Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the degree of soiling, and the hardness of the water in your area. If you do not know how hard your water is, enquire at your local water authority.

Do not use detergent that has hardended or solidifi ed as the detergent may remain in the rinse cycle. It may cause your washing machine to not rinse properly or result in the overfl ow becoming blocked.

30_ washing a load of laundry

WF1124ZAC-03038K-06_EN.indd Sec5:30

2012-10-04 10:50:08