Page 1
WASHING MACHINE
User’s Manual
FEATURES 1
SAFETY INSTRUCTIONS 2
DESCRIPTION OF PARTS 3
CONTROL PANEL 4
WASHING PROCEDURE 4
Digital(Fuzzy) course 4
Speedy course 4
Rinse 4
Spin 4
Rinse+Spin 4
INSTALLATION & MAINTENANCE 5
Environment 5
Levelling 5
Connecting the water supply hose 5
Assembling the rat protection panel 5
In case of pump-drained washer 5
Connecting the drain hose 6
How to add the fabric softener 6
Water supply connector filter 6
Cleaning the filter net. 6
How to clean the filter 6
Please read this manual before using and note
how to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
How to assemble the legs 6
TROUBLESHOOTING
SPECIFICATIONS
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
Register your porduct at
www.samsung.com/global/register
Page 2
FEATURES
PULSATOR
• The Pulsator helps water and detergent to go through fabrics efficiently
while providing both the powerful water action to clean larger and heavier clothes and
the gentle water action to clean all delicates with less wear and tear on clothes.
WATERFALL FLOW
• The Waterfall Flow injected from under the pulsator cascades with full force back into the tub,
pushing down any clothes that float right under the water surface. It is this Waterfall Flow that
enables this washing machine to effectively wash large and heavy items, such as bluejeans
and blankets.
MAGIC FILTER
• This unique magic Filter ensures that all the lint inside the tub is captured for top quality filtering
results to deliver consistently effective cleaning results.
SOFTENER DISPENSER
• The Softener Dispenser releases the fabric softener at the appropriate time when the last rinsing proceeds.
CHILD LOCK FUNCTION
This is a device to protect children from being accidentally hurt while playing with the washer.
How to start the Child-Lock function:
•
Press the "Power" button to go to an initial washing mode.
•
By pressing "Start/Hold" button, you start washing and in case Child Lock function is needed during the laundry
•
Press and hold down the COURSE button for more than 3 seconds to run the CHILD LOCK feature.
To release the function of Child-Lock:
•
In case the "Child-Lock" is programmed, press the "Course" button for 3 seconds.
AUTO RESTART
• The power is turned on automatically after power failure.
1
Page 3
SAFETY INSTRUCTIONS
Please note that the following precautions for safety intend to prevent unpredictable danger and damage
by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.
• Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.
WARNING
There might be serious injury or fatal accident when
you violate this instruction.
If the power supply cord or plug is damaged or
loosened, do not use.
• An electric shock or a fire may take place.
Do not pull the cord off or touch it with moist hands.
• An electric shock or a fire may take place.
Do not bend the power supply cord by force or
press it with heavy things.
• An electric shock or a fire may take place.
Do not install the washer nearby electric implement or
don’t put a candle light or cigarette light on the washer.
• A fire may take place.
Do not disassemble, repair or remodel it recklessly.
• When you need to repair it, please call service
agent. An electric shock or a fire may take place.
During operation, do not put your hands or metal
materials under the washer.
• You may be hurt by spinning board beneath
the washer.
Stay away from the washer when the bottom of the
washer sinks into the water.
• There might be an electric shock. Please
wait until the water drains out completely.
Do not put laundry stained with gasoline, benzene,
or alcohol in the washer, and keep the materials
away from the washer.
• An explosion or a fire may take place.
During spinning, don’t put your hand in the spinning tub.
• It may hurt your hands. If it does not stop within
15 seconds after you open the lid, call
service agent immediately.
CAUTIONS
There might be a slight injury or damage when you
violate this instruction.
Don’t’ install it in the area with moisture or outdoor
where it has rain or snow
• An electric shock or a fire may take place.
Please unplug the power supply cord when you do
not use it.
• An electric shock or a fire may take place.
If there is dust or water on the power supply plug
and its connected part, please remove it completely.
• An electric shock or a fire may take place.
Do not make your kids look into the inside of the
washer.
• If your kid falls into the washer, his life could be
in danger.
Ventilate immediately without touching the power
plug if gas is leaking.
• An electric shock or a fire may take place if it
catches flame.
If the washer makes strange noise, smell or smoke,
unplug it promptly and call service agent.
• An electric shock or a fire may take place.
When cleaning, don’t spray water to the parts of the
washer directly.
• It may make it’s life span shorten.
Also an electric shock or fire may take place
Don’t use several appliances together with an outlet.
• A fire may take place due to unusual heat.
Don’t press the button with an awl or pin.
• An electric shock or a fire may take place.
2
Page 4
DESCRIPTION OF PARTS
Make use of the User’s Manual depending upon your washing machine model.
DRAIN-HOSE (PUMP)
WATER SUPPLY HOSE (COLD)
The User’s Manual is for common use.
SPIN BASKET
POWER CORD
GROUND LEAD
When the water pipe is
metal, make sure to cover
the end of the ground wire.
WATER DRAIN HOSE
SOUND ABSORPTION
PAN EL
LID
and spinning.
closed during washing
Be sure to keep the lid
FILTER
washing.
the filter during
Lint will be collected in
DISPENSER
FABRIC SOFTENER
BLEACH INLET
3
PANEL
PULSATOR
Adjust the length
of the legs when
FRONT CONTROL
ADJUSTABLE LEGS
installing the washer.
Page 5
For more details, see control panel of your washing machine.
CONTROL PANEL
➣ POWER BUTTON
Press this button once to operate.
Press once again to turn the power off.
➣
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation,
press this button to stop, and once again to restart
after changing the procedure.
POWER
START/
HOLD
➣ COURSE SELECT BUTTON
With every press of this button,
the washing course changes;
Digital(Fuzzy) → SPEEDY → RINSE → SPIN →
RINSE+SPIN → Digital(Fuzzy)
➣ WATER LEVEL SELECT BUTTON
According to the washload,
select the water level ;
MEDIUM → HIGH → EXTRA LOW → LOW → MEDIUM
COURSE
WATER
LEVEL
WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in.
Make sure to lay down the drain hose. (In case no drain pump)
Detergent Usage
1. Put the detergent evenly into the tube before placing the laundry in.
2. If you put the detergent into the tube next to the laundry and leave it for an extended time, the laundry may become discolored.
3. Do not use too much detergent. Some of the detergent may not dissolve immediately and may remain on the laundry
causing damage to it, if too much detergent is used or the water temperature is too low.
❮
➣ Digital(Fuzzy) COURSE
Selects the best washing course
automatically.
1. Press the POWER Button to"ON".
2. Press the START/HOLD button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
3. Close the lid.
➣ SPEEDY COURSE
Because washing is speedy,
it is good for light or less stained laundry.
1. Press the POWER Button to"ON".
2. Press the course select button once.
3. Press the START/HOLD button
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
➣ RINSE COURSE
When you want rinse only
do the followings.
POWER
POWER
POWER
❮❮
COURSE
❮❮
COURSE
START/
HOLD
START/
HOLD
START/
HOLD
1. Press the POWER Button to "ON".
2. Press the course select button twice.
3. Press the START/HOLD button
4. Close the lid.
❮❮
POWER
POWER
COURSE
❮❮
COURSE
➣ SPIN COURSE
When you want spin only
do the followings.
1. Press the POWER Button to "ON".
2.Press the course select three times.
3.Press the START/HOLD button.
4. Close the lid.
➣ RINSE+SPIN
1. Press the POWER Button to "ON".
2. Press the course select button four times.
3. Press the START/HOLD button.
4. Close the lid.
Rinsing and spin drying
follow.
START/
HOLD
START/
HOLD
4
Page 6
INSTALLATION & MAINTENANCE
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise or
vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
•
LEVELLING
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order.
So, make sure that the washer is leveled properly.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
•
Open the lid of the machine, pour water into the tub up to the level
just below the pulsator, and adjust the legs so that the pulsator is
positioned at the center of the water as shown in the figure.
•
Place the machine more than 10cm away from the wall.
•
Adjust the legs on feet for levelling .
CONNECTING THE WATER SUPPLY HOSE
1. Remove the adaptor
from the water
supply hose.
2. First,using a "+" type scre driver,
loosen the four screws on the adaptor.
Next,take the adaptor and turn part(b)
following the arrow for gap about 5mm
between them.
3. Connect adaptor to the water tap by
tightening the screws firmly.
Then, turn part (b) following the arrow
and put (a) and (b)together.
4. Connect the water supply hose to the adaptor.
Pull down the part (c) of the water supply
hose .When the part (c)is released,
the hose is automatically connected to
the adaptor making a 'click' sound.
The User’s Manual is for common use.
a
b
a
b
NOTICE After completing connection, if water leaks from the hose,
then repeat the same steps.
c
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big,remove the spacing
ring before inserting the faucet into the adaptor.
Never install the washer near water.
Do not place the washer in steamy rooms or where the
washer is directly exposed to rain.Moisture may destroy the
electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic and electrical components are affected by direct
heat,never place the washer near furnaces, boilers, etc.
Do not place under direct sunlight.
Loosen
Lock
5. Connect the other end of the water
supply hose to the inlet water valve at the
back of the washer. Screw the hose
clockwise all the way in.
5-1.Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
Screw the hose clockwise all the way in.
If the water tap is a screw type,assemble
a water supply hose that fits to the
tap as shown.
ASSEMBLING THE RAT PROTECTION PANEL
1.Insert the sound
absorbing panel
to the assembling
hole on back side
to the end.
IN CASE OF PUMP-DRAINED WASHER
Take out the cap-hose and
connect the outlet-hose.
cap-hose
outlet-hose
Be sure to join tightly the drain hose into
the drain-outlet on the back of the
machine.
2.If you have difficulty
inserting the panel
lift up the washer a
little and insert it
Be sure to join tightly the drain
hose into the drain-outlet
on the side of the machine.
5
Install the drain hose in the
position of about 90~100cm
above the ground.
70~80cm
90~100cm
Page 7
CONNECTING THE DRAIN HOSE
After pressing the joint ring(a), insert the drain hose(b)
to drain direction.
HOW TO ADD THE FABRIC SOFTENER
•
When a proper amount (one time does) of fabric
softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.
•
Do not use detergent, bleach or starch into
the Softener Inlet.
•
Using too much softener may produce
unsatisfactory results.
WATER SUPPLY CONNECTOR FILTER
2.
1.
Pull out the filter and wash well.
Pull in the filter and connect
the hose to the inlet water
valve tightly.
(a)
(b)
•
Do not open the lid during the Spin Dry cycle.
If added too early, its effectiveness will decrease.
•
Do not leave the softener
into the Softener
Dispenser for a long time.
Because softner
became stiff.
inlet water
valve
3.
Check if there is a leakage.
Note to tighten up the
connector.
CLEANING THE FILTER NET
1. Push the upper part
of the filter and pull in.
Clean the filter net often to keep the washer clean.
2. Open the cover as
shown in the figure.
3. Clean the filter. 4. Close the cover and insert the
HOW TO CLEAN THE FILTER
1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise
and pull out the filter.
3. Remove dirts and rotate
the filter clockwise
until it locks in position.
(pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and
remove dirts.
4. Reassemble in
reverse order.
HOW TO ASSEMBLE THE LEGS
1. Check the 4 Legs.(Front-right. Front-left. Rear-right. Rear-left)
2. Lay down the Washing Machine to the front.
3. Insert the hook of leg in to the square hole of base.
4. Push the leg to the arrow direction to “Click”.
5. Finaly fix the legs on the base with screw like a figure.
6
lower part of the filter in the
basket first and then push the
filter with "click" sound .
Hook
Hole
2
1
Base
Screw
Page 8
TROUBLESHOOTING
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound.
DISPLAY : Speedy LED On +
Water Level LEDS Blink
IN CASE THE NEED FOR SERVICING ARISES.
If any problem occurs with your products,do not hestitate to call any nearby.
Name, address, telephone number is required.
Water dose not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15
minutes, a buzzer will sound.
DISPLAY : Spin LED + Speedy LEDS On +
Water Level LEDS Blink
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Water is overflowed
Restart after spinning.
If the error sign still indicates,
call agency.
SPECIFICATIONS
POWER
CONSUMPTION
DIMENSIONS(mm)
WEIGHT
WATER PRESSURE
WASHING TYPE
WASH
SPIN
330W
246W
W540xD560xH850
30 kg
0.05~0.78 MPa
(0.5 ~ 8.0 kg
Stirring Type
.
f/cm2)
STANDARD
WATER LEVEL
WATER USAGE
PULSATOR
ROTATING SPEED
HIGH
MED
LOW
MIN
CODE NO. : DC68-02197A
56 l
49 l
41 l
34 l
140
113 rpm
l
Page 9
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Contact SAMSUNG WORLD WIDE
Country
AUSTRALIA
INDIA
MALAYSIA
PHILIPPINES
SINGAPORE
VIETNAM
RUSSIA
SOUTH AFRICA
Customer Care Center
1300 362 603
3030 8282
1600 1100 11
1800-88-9999
1800-10-SAMSUNG
(7267864)
1800-SAMSUNG
(7267864)
1 800 588 889
8-800-200-0400
0860 7267864
(SAMSUNG)
Web Site
www.samsung.com/au
www.samsung.com/in
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/vn
www.samsung.com/ru
www.samsung.com/za
Loading...