Page 1
FEATURES 1
SAFETY INSTRUCTIONS 2
DESCRIPTION OF PARTS 3
CONTROL PANEL 4
WASHING PROCEDURE 5
Fuzzy course 5
Heavy duty course 5
Delicate course 5
Delay start course 5
MANUAL FUNCTIONS 6
INSTALLATION & MAINTENANCE 7
Levelling 7
Connecting the water supply hose 7
Assembling the part protection panel 8
In case of pump-drained washer 8
Connecting the drain hose 8
How to add the fabric softener 8
How to put the detergent in 8
Water supply connector filter 9
Cleaning the filter net 9
How to clean the filter 9
TROUBLESHOOTING 10
SPECIFICATIONS
Please read this manual before using and note
how to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
WASHING MACHINE
User’s Manual
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
Page 2
1
FEA TURES
FUZZY CONTROL
• Fuzzy control operates with best washing course
by sensing the washload like artificial intelligence.
PULSATOR
• The Pulsator helps water and detergent to go through fabrics efficiently
while providing both the powerful water action to clean larger and heavier clothes and
the gentle water action to clean all delicates with less wear and tear on clothes.
WATERFALL FLOW
• The Waterfall Flow injected from under the pulsator cascades with full force back into the tub,
pushing down any clothes that float right under the water surface. It is this Waterfall Flow that
enables this washing machine to effectively wash large and heavy items, such as bluejeans
and blankets.
MAGIC FILTER
• This unique magic Filter ensures that all the lint inside the tub is captured for top quality filtering
results to deliver consistently effective cleaning results.
SOFTENER DISPENSER
• The Softener Dispenser releases the fabric
softener at the appropriate time when the last
rinsing proceeds.
Page 3
WARNING
There might be serious injury or fatal accident when
you violate this instruction.
If the power supply cord or plug is damaged or
loosened, do not use.
• An electric shock or a fire may take place.
Do not pull the cord off or touch it with moist hands.
• An electric shock or a fire may take place.
Do not bend the power supply cord by force or
press it with heavy things.
• An electric shock or a fire may take place.
Do not install the washer nearby electric implement
or don’t put a candle light or cigarette light on the
washer.
• A fire may take place.
Do not disassemble, repair or remodel it recklessly.
• When you need to repair it, please call service
agent. An electric shock or a fire may take place.
During operation, do not put your hands or metal
materials under the washer.
• You may be hurt by spinning board beneath
the washer.
Stay away from the washer when the bottom of the
washer sinks into the water.
• There might be an electric shock. Please
wait until the water drains out completely.
Do not put laundry stained with gasoline, benzene,
or alcohol in the washer, and keep the materials
away from the washer.
• An explosion or a fire may take place.
During spinning, don’t put your hand in the
spinning tub.
• It may hurt your hands. If it does not stop within
15 seconds after you open the lid, call
service agent immediately.
CAUTIONS
There might be a slight injury or damage when you
violate this instruction.
Don’t’ install it in the area with moisture or outdoor
where it has rain or snow
• An electric shock or a fire may take place.
Please unplug the power supply cord when you do
not use it.
• An electric shock or a fire may take place.
If there is dust or water on the power supply plug
and its connected part, please remove it completely.
• An electric shock or a fire may take place.
Do not make your kids look into the inside of the
washer.
• If your kid falls into the washer, his life could be
in danger.
Ventilate immediately without touching the power
plug if gas is leaking.
• An electric shock or a fire may take place if it
catches flame.
If the washer makes strange noise, smell or smoke,
unplug it promptly and call service agent.
• An electric shock or a fire may take place.
When cleaning, don’t spray water to the parts of the
washer directly.
• It may make it’s life span shorten.
Also an electric shock or fire may take place
Don’t use several appliances together with an
outlet.
• A fire may take place due to unusual heat.
Don’t press the button with an awl or pin.
• An electric shock or a fire may take place.
2
SAFETY INSTRUCTIONS
Please note that the following precautions for safety intend to prevent unpredictable danger and damage
by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.
• Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.
Page 4
3
DESCRIPTION OF PARTS
DRAIN-HOSE (PUMP)
WATER SUPPLY HOSE(HOT)
WATER SUPPLY HOSE (COLD)
LID
Be sure to keep the lid
closed during washing
and spinning.
Lint will be collected in
the filter during
washing.
FILTER
DETERGENT BOX
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
GROUND LEAD
When the water pipe is
metal, make sure to cover
the end of the ground wire.
POWER CORD
WATER DRAIN HOSE
SOUND ABSORPTION
PANEL
SPIN BASKET
ADJUSTABLE LEGS
Adjust the length
of the legs when
installing the washer.
CONTROL PANEL
BLEACH INLET
FABRIC SOFTENER
DISPENSER
PULSATOR
Page 5
For more details, see control panel of your washing machine.
4
CONTROL PANEL
POWER BUTTON
Press this button once to operate.
Press once again to turn the power off.
START/PAUSE BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation, press this button to stop,
and once again to restart after changing the procedure.
DELAY START BUTTON
Press this button when delay start washing is needed.
COURSE SELECT BUTTON
With every press of this button, the washing course changes;
FUZZY➔ HEAVYDUTY➔ DELICATE
CYCLE SELECT BUTTON
With every press of this button, the function changes;
WASH
➔
RINSE ➔ SPIN ➔ RINSE&SPIN
WATER LEVEL SELECT BUTTON
According to the washload,select the water level ;
LOW
➔
MEDIUM ➔ HIGH
TEMPERATURE SELECT BUTTON
As you press this button, the type of water is selected as follows.
COLD
➔
WARM ➔ HOT
REMAINING TIME INDICATOR LIGHT
The indicator light shows the remaining time (in minutes) of each wash cycle.
At the end of the cycle,the power automatically switches off.
POWER
START/
PAUSE
DELAY
START
COURSE
CYCLE
TEMPERATURE
WA TER
LEVEL
Page 6
5
WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pump)
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
FUZZY COURSE
Selects the best washing course
automatically.
1. Press the POWER Button to"ON".
2. Press the START/PAUSE button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/PAUSE
button again.You can change the course when paused.
3. Close the lid.
HEAVYDUTY COURSE
1. Press the power button to "ON".
2. Press the course select button once.
3. Press the START/PAUSE button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/PAUSE
button again.You can change the course when paused.
4. Close the lid.
DELICATE COURSE
1.Press the power button to "ON".
2.Press the course select two times.
3.Press the START/PAUSE button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/PAUSE
button again.You can change the course when paused.
4. Close the lid.
DELAY START COURSE
Select this course when you have to go out or do
something else.
1. Press the power button to "ON".
2. Press the DELAYSTART button once.
You may change the delay start time with
use the DEALY START button.
(from 3 hours to 18 hours)
3. Press the START/PAUSE button and put
the proper amount of detergent into tub.
4. Close the lid.
The washing finishes by the time you reserved.
POWER
COURSE
COURSE
START/
PAUSE
POWER
START/
PAUSE
DELAY
START
POWER
COURSE
START/
PAUSE
POWER
START/
PAUSE
Page 7
Note
•
It water still remains after wash
select SPIN only.
Remainder of water to be removed.
•
Even though the water level is auto
matically set up, select the adequate
water level according to the laundry.
Note
•
It water still remains after wash
select SPIN only.
Remainder of water to be removed.
•
Even though the water level is
automatically set up, select the
adequate water level in case that the
laundry is soaked.
Note
•
If you select SPIN only, there is a gap
shown between the timer for spinning
and the timer for whole working, which
included more time for draining and
holding. So, note it does not mean out
of order.
Note
•
If more rinsing is necessary,
select the rinsing water supplement.
6
Each washing course changes manually.
Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Pause button
1. Press the POWER button to on.
2. Select WASH.
•
Press the cycle button and adjust the washing time.
• Lode size and water level is determined automatically.
3.Press START/P AUSEbutton (close the lid)
•
Y ou can adjust the washing time from 3 to
25 minutes per one minute.
1. Press the POWER button to on.
2. Select RINSE.
•
Press the cycle button and select the rinsing
frequency.
3.Press START/P AUSEbutton (close the lid)
•
Y ou can adjust the frequency from 1 to 5 times.
1. Press the POWER button to on.
2. Select SPIN.
•
Press the cycle button and adjust the time of
spinning.
•
The washer spins slowly in order to prevent
the clothes being tangled.
3.Press START/P AUSEbutton (close the lid)
•
Y ou can adjust from 1 minute to 7 minutes.
1. Press the POWER button to on.
2. Select RINSE and SPIN.
•
Adjust the rinsing frequency and spinning time.
3. Press Start/Pause button (close the lid)
POWER CYCLE
START/
PAUSE
POWER CYCLE
START/
PAUSE
POWER CYCLE
CYCLE
START/
PAUSE
POWER
START/
PAUSE
WASH ONLY
RINSE ONLY
SPIN ONLY
RINSE + SPIN
MANUAL FUNCTIONS
Page 8
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
7
INSTALLATION & MAINTENANCE
•
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order.
So, make sure that the washer is leveled properly.
ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface,
noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the
washer is directly exposed to rain.Moisture may destroy the
electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic and electrical components are affected by direct
heat,never place the washer near furnaces, boilers, etc.
Do not place under direct sunlight.
LEVELLING
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
•
Open the lid of the machine, pour water into the tub up to the level
just below the pulsator, and adjust the legs so that the pulsator is
positioned at the center of the water as shown in the figure.
•
Place the machine more than
10cm away from the wall.
•
Adjust the legs on feet
for levelling .
1. Remove the adaptor
from the water
supply hose.
2. First,using a "+" type
screw driver, loosen the
four screws on the adaptor.
Next,take the adaptor and
turn part(b) following the
arrow for gap about 5mm
between them.
3. Connect adaptor to the
water tap by tightening
the screws firmly.
Then, turn part (b)
following the arrow and
put (a) and (b)together.
4. Connect the water supply
hose to the adaptor. Pull down
the part (c) of the water supply
hose .When the part (c)is released,
the hose is automatically
connected to the adaptor
making a 'click' sound.
a
b
a
b
c
CONNECTING THE WATER SUPPLY HOSE
5. Connect the other end of the water
supply hose to the inlet water valve
at the back of the washer.
Screw the hose clockwise all the
way in.
5-1.Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
Screw the hose clockwise all the way in.
If the water tap is a screw type,assemble
a water supply hose that fits to the
tap as shown.
NOTICE After completing connection, if water leaks from the hose,
then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big,remove the spacing
ring before inserting the faucet into the adaptor.
Adjustment the heigt of the machine
Adjust the legs to level the washer
Be careful not to put in your hand under the legs.
Pull the handles located at the
right and left of the front side
and slide off.
Adjust the height of the machine
upward or downward.
When the adjustment
is finished, push the handles
to fix the adjusting legs.
Page 9
8
Install the drain hose in the
position of about 90~100cm
above the ground.
•
When a proper amount (one time does) of fabric
softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.
•
Do not use detergent, bleach or starch into
the Softener Inlet.
•
Using too much softener may produce
unsatisfactory results.
•
Do not open the lid during the Spin Dry cycle.
If added too early, its effectiveness will decrease.
•
Do not leave the softener
into the Softener
Dispenser for a long time.
Because softner
became stiff.
CONNECTING THE DRAIN HOSE
After pressing the joint ring(a), insert the drain hose(b)
to drain direction.
(a)
(b)
REAR SIDE
70~80cm
Be sure to join tightly the drain
hose into the drain-outlet
on the side of the machine.
Be sure to join tightly the drain hose into
the drain-outlet on the back of the
machine.
Take out the cap-hose and
connect the outlet-hose.
IN CASE OF PUMP-DRAINED WASHER
cap-hose
outlet-hose
ASSEMBLING THE RAT PROTECTION PANEL
Tilt the washer a little and lift up the panel until it clicks,
finally fix the panel with screw to the base as shown
in the figure.
HOW TO ADD THE FABRIC SOFTENER
90~100cm
1.Open the detergent box by pulling in the direction of the arrow as shown in the
figure and then put the powder detergent in the detergent box.
2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.
HOW TO PUT THE DETERGENT IN
Detergent Device
Put the detergent
in proportion to
water level
Softener Device
Softener
baseline
CAUTION : If softener is stored over the above base line, it may flow down at any time.
1.Insert the sound
absorbing panel
to the assembling
hole on front side
to the end.
2.If you have difficulty
inserting the panel
lift up the washer a
little and insert it
Anti-rat cover
Page 10
1. Place a rag under the washer filter not to wet the floor .
2. Rotate the filter counterclockwise
and pull out the filter.
3. Remove dirts and rotate
the filter clockwise
until it locks in position.
9
WATER SUPPLY CONNECTOR FILTER
1.
Pull out the filter and wash well.
2.
Pull in the filter and connect
the hose to the inlet water
valve tightly.
inlet water
valve
3.
Check if there is a leakage.
Note to tighten up the
connector.
CLEANING THE FILTER NET
Clean the filter net often to keep the washer clean.
1. Push the upper part
of the filter and pull in.
2. Open the cover as
shown in the figure.
3. Clean the filter. 4. Close the cover and insert the
lower part of the filter in the
basket first and then push the
filter with "click" sound .
HOW TO CLEAN THE FILTER
(pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and
remove dirts.
4. Reassemble in
reverse order.
1. Push up and
pull out the filter net.
2.
Remove the collected
lint from the filter net.
3. Clean the filter. 4.
Pull down the filter net.
Page 11
WASHING MACHINE WON'T WORK
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
WATER IS NOT SUPPLIED
Is the water tap opened?
Is the water cut off?
Is the water supply hose
or hose connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound, and the remaining
time indicator will show "7E".
WATER DOSE NOT DRAIN
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15
minutes, a buzzer will sound,
and the remaining time indicator
will show "E”.
SPINNING DOES NOT WORK
Is the laundry spread out
evenly in the washer?
Is the washer set on a sturdy flat
surface?
"UE"
"DE"
WATER SUPPLY DOSE NOT STOP
Close the water tap.
Disconnect the power
supply card.
Call to service center or agency.
10
TROUBLESHOOTING
Page 12
NORMAL
CAPACITY
DIMENSIONS(mm)
WEIGHT
WATER PRESSURE
WASHING TYPE
W600xD660xH1010
48 kg
0.05~0.78 MPa
(0.5 ~ 8.0 kg. f/cm2)
Stirring Type
STANDARD
WATER LEVEL
WATER USAGE
150
l
105 rpm
680rpm
PULSAT OR
ROTATING SPEED
SPINNING TUB
ROTATING SPEED
SPECIFICATIONS
IN CASE THE NEED FOR SERVICING ARISES.
If any problem occurs with your products,do not hestitate to call any nearby.
Name, address, telephone number is required.
WASH
SPIN
8 kg
8 kg
HIGH
MEDIUM
LOW
74 l
55 l
42 l
WASHING
Continue
SPINNING
15 Minutes
450W
WASHING
WASHING
SPINNING
SPINNING
MOTOR
INPUT
MOTOR MAX
INPUT
NORMAL
CAPACITY
450W
280W
CODE NO. : DC68-01124K
Loading...