Page 1
WASHING MACHINE
User’s Manual
FEATURES..............................................................1
SAFETY INSTRUCTIONS...................................... 2
DESCRIPTION OF PARTS ....................................3
FRONT CONTROL PANEL & BUTTONS ..............4
Please read this manual before using and note
how to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
HOW TO PERFORM THE AUTOMATIC WASHING
Fuzzy course............................................................5
Heavy course ..........................................................5
Blanket course ........................................................5
Speedy course ........................................................5
Wool course ............................................................5
Clean tub course......................................................6
Soak course ............................................................6
Delay start................................................................6
MANUAL FUNCTIONS ..........................................7
INSTALLATION & MAINTENANCE........................8
Environment ............................................................8
Levelling ..................................................................8
Connecting the water supply hose ..........................9
Assembling the part protection panel ....................10
In case of pump-drained washer ..........................10
Connecting the drain hose ....................................10
How to add the fabric softener ..............................10
How to put the detergent in ..................................10
Water supply connector filter..................................11
Cleaning the filter net ....................................11
How to clean the filter ............................................11
TROUBLESHOOTING ..........................................12
SPECIFICATIONS
......5
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
Page 2
FEATURES
FUZZY CONTROL
• Fuzzy control operates with best washing course
by sensing the washload like artificial intelligence.
TRANSPARENT WINDOW
• This Transparent Window is the new concept to solve the curiosity
of users to see inside of washing machine while operation.
While operation, the laundry progress inside of washing machine can be checked by
looking through the transparent window.
PULSATOR
• The Pulsator helps water and detergent to go through fabrics efficiently
while providing both the powerful water action to clean larger and heavier clothes and
the gentle water action to clean all delicates with less wear and tear on clothes.
WATERFALL FLOW
• The Waterfall Flow injected from under the pulsator cascades with full force back into the tub,
pushing down any clothes that float right under the water surface. It is this Waterfall Flow that
enables this washing machine to effectively wash large and heavy items, such as bluejeans
and blankets.
MAGIC FILTER
• This unique magic Filter ensures that all the lint inside the tub is captured for top quality filtering
results to deliver consistently effective cleaning results.
SOFTENER DISPENSER
• The Softener Dispenser releases the fabric
softener at the appropriate time when the last
rinsing proceeds.
1
Page 3
SAFETY INSTRUCTIONS
Please note that the following precautions for safety intend to prevent unpredictable danger and damage
by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.
●
Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.
WARNING
There might be serious injury or fatal accident when
you violate this instruction.
If the power supply cord or plug is damaged or
loosened, do not use.
-
An electric shock or a fire may take place.
Do not pull the cord off or touch it with moist hands.
-
An electric shock or a fire may take place.
Do not bend the power supply cord by force or
press it with heavy things.
An electric shock or a fire may take place.
-
Do not install the washer nearby electric implement
or don’t put a candle light or cigarette light on the
washer.
-
A fire may take place.
Do not disassemble, repair or remodel it recklessly.
When you need to repair it, please call service
agent. An electric shock or a fire may take place.
During operation, do not put your hands or metal
materials under the washer.
-
You may be hurt by spinning board beneath
the washer.
Stay away from the washer when the bottom of the
washer sinks into the water.
There might be an electric shock. Please
wait until the water drains out completely.
Do not put laundry stained with gasoline, benzene,
or alcohol in the washer, and keep the materials
away from the washer.
-
An explosion or a fire may take place.
During spinning, don’t put your hand in the
spinning tub.
-
It may hurt your hands. If it does not stop within
15 seconds after you open the lid, call
service agent immediately.
CAUTIONS
There might be a slight injury or damage when you
violate this instruction.
Don’t’ install it in the area with moisture or outdoor
where it has rain or snow
-
An electric shock or a fire may take place.
Please unplug the power supply cord when you do
not use it.
An electric shock or a fire may take place.
-
If there is dust or water on the power supply plug
and its connected part, please remove it completely.
An electric shock or a fire may take place.
-
Do not make your kids look into the inside of the
washer.
-
If your kid falls into the washer, his life could be
in danger.
Ventilate immediately without touching the power
plug if gas is leaking.
-
An electric shock or a fire may take place if it
catches flame.
If the washer makes strange noise, smell or smoke,
unplug it promptly and call service agent.
An electric shock or a fire may take place.
-
When cleaning, don’t spray water to the parts of the
washer directly.
-
It may make it’s life span shorten.
Also an electric shock or fire may take place
Don’t use several appliances together with an
outlet.
-
A fire may take place due to unusual heat.
Don’t press the button with an awl or pin.
-
An electric shock or a fire may take place.
2
Page 4
FILTER
Lint will be collected in
the filter during
washing.
FABRIC SOFTENER
DISPENSER
LID
Be sure to keep the lid
closed during washing
and spinning.
WATER SUPPLY HOSE(HOT)
WATER SUPPLY HOSE (COLD)
DRAIN-HOSE (PUMP)
DETERGENT BOX
SPIN BASKET
Make use of the User’s Manual depending upon your washing machine model.
DESCRIPTION OF PARTS
The User’s Manual is for common use.
3
POWER CORD
BLEACH INLET
PULSATOR
GROUND LEAD
FRONT CONTROL
PANEL
When the water pipe is
metal, make sure to cover
the end of the ground wire.
WATER DRAIN HOSE
ADJUSTABLE LEGS
Adjust the length
of the legs when
installing the washer.
SOUND ABSORPTION
PANEL
Page 5
FRONT CONTROL PANEL & BUTTONS
For more details, see control panel of your washing machine.
POWER BUTTON
POWER
- Press this button to turn the power on/off.
- The power is automatically turned off after
washing or if not disturbed for 10 minutes.
START
START/ HOLD BUTTON
HOLD
- Select this button when you are about to start
washing or wish to pause.
COURSE BUTTON
COURSE
- Choose the course according to the types and
status of laundry.
- For further details about each course, please
refer to pages 11~16.
SPIN BUTTON
SPIN
- Use this function when you want to spin only or
adjust the spinning time. (1~9 min.)
- Select "1 min. Spin" when you want to prevent
wrinkles during the spin.
- When you select "Spin" only, there will be a
difference between the spinning time and the
remaining time. This is because the remaining
time includes the draining and holding time as
well as the actual spinning time.
WATER
WATER LEVEL BUTTON
LEVEL
- Water level is automatically indicated, but you
can select the water level by pressing this button
if you want it otherwise.
WATER
WATER SUPPLY BUTTON
SUPPLY
- Use this function when choosing between cold or
hot water.
DELAY
DELAY START BUTTON
START
- Use this function when you would like to finish
washing at the time you want.
- Turn the power off in order to cancel the set time.
LEVEL METER
- Adjusts the water inflow to the center by turning
the adjustable legs.
❖ WATER LEVEL/DETERGENT INDICATOR
- According to the amount of laundry, amount of
detergent and water level are automatically
indicated in proportion.
- Indicates the water level in 10 grades.
SOAK BUTTON
SOAK
- Use this function when you want to perform soak
washing.
- This function will not be selected in the water
cleaning course.
WASH BUTTON
WASH
- Select this function when you want to wash only
or adjust the washing time. (6~30 min.)
RINSE BUTTON
RINSE
- Select this function when you want to rinse only
or change the number of times on rinsing. (Max.
5 times)
❖ TIME LEFT/DELAY START/ERROR SIGN
INDICATOR
- Indicates the time left to the end of washing.
- Indicates the lapsed time.
- If anything should go wrong, it indicates error
messages in different circumstances, allowing
you to rectify the problem.
❖ PROCEDURE INDICATOR
- Indicates the stage of washing.
- The next stage is lightened up when it is done
with the current procedure, and the one finished
is automatically turned off. It flickers during the
procedure.
4
Page 6
HOW TO PERFORM THE AUTOMATIC WASHING
FUZZY COURSE
POWER
START/
HOLD
1. Put the laundry into the washing machine and press
POWER button.
2. Press START/HOLD button.
●
After spinning its washing board without water,
your machine measures the weight of the laundry
and indicates adequate amount of water and
detergent.
3. Open the lid to add the detergent/rinse in proportion
to the water level indicated, and then close the lid.
NOTE
- When you open the lid during operation, the machine will
stop for your safety. (Except during water supply.)
- If you chose hot water only, cold water will be supplied
for the first 20 seconds to prevent the hot water from
damaging the laundry.
- You can adjust washing time, number of rinsing and
spinning time at any stage during the operation.
START/
HOLD
HEAVY COURSE
POWER
COURSE
(For jeans or heavily soiled laundry)
1. Put the laundry in the washing machine and press
POWER button.
2. Select HEAVY course by pressing COURSE button.
3. Press START/HOLD button.
Add the detergent/rinse in proportion to the water
level and then close the lid.
START/
HOLD
BLANKET COURSE
POWER
COURSE
(For big laundry such as quilts or bedcovers)
1. Put the laundry in the washing machine and press
POWER button.
●
As shown in the figure below, fold the laundry of
great bulk such as quilts or bedcovers before
putting in the washing machine.
●
Do not wash electric blankets or carpets in your
machine.
●
In cases where you wash the light yet bulky
laundry(e.g. cashmere, etc.), it is recommended
that you wash in the laundry net that can be
purchased separately.
2. Select BLANKET course by pressing COURSE
button.
3. Press START/HOLD button.
Add the detergent/rinse in proportion to the water
level and then close the lid.
NOTE
- The following quilts with hand washing mark are
washable in your machine:
- Acryl Blankets (acryl 100%, nylon coating);
Mixed Blankets (cotton polyester); Woolen Blankets and
Quilt Linings (polyester 100%, below 200(250cm)
- Blankets (5kg or less);
Quilt Linings (2kg, 3.5kg in total weight)
START/
HOLD
SPEEDY COURSE
POWER
COURSE
(In cases where you want to wash lightly soiled
laundry such as towels in a short time)
1. Put the laundry into the washing machine and press
POWER button.
2. Select SPEEDY course by pressing COURSE
button.
3. Press START/HOLD button.
Add the detergent/rinse in proportion to the water
level and then close the lid.
START/
HOLD
WOOL COURSE
POWER
COURSE
(For the laundry with wool washing mark such as
sweaters, cardigans or delicate clothes)
1. Put the laundry into the washing machine and press
POWER button.
●
Be sure the weight of the laundry is less than 2kg.
2. Select WOOL course by pressing COURSE button.
●
In case where you wash the bulky yet light
laundry, it is recommended that you adjust water
level properly (only over the middle of water level,
the water level is indicated).
3. Press START/HOLD button.
Add the detergent/rinse in proportion to the water
level and then close the lid.
●
Spin-dry the laundry only for a short period at the
end to avoid wrinkles.
●
Cold water should only be selected.
●
It is highly recommended that you use neutral
detergent.
NOTE
- You can select hot/cold water by pressing WATER
SUPPLY button in all courses, except for wool course,
where cold water should be selected only.
5
Page 7
CLEAN TUB COURSE
POWER
COURSE
START/
HOLD
(In case you want to clean the tub)
1. Press POWER button.
2. Select CLEAN TUB course by pressing COURSE
button.
3. Press START/HOLD button.
Add the detergent/rinse in proportion to the water
level and then close the lid.
●
Soak washing function is adopted.
●
WATER SUPPLY button only is controllable.
●
Remove the dirt on the outer wall of the washing
tub with a form of powerful stream of water.
START/
SOAK COURSE
POWER
SOAK
HOLD
(In case you want to perform soak washing for heavily
soiled laundry)
1. Put the laundry into the washer and press POWER
button.
2. Select a course you want by pressing COURSE
button.
●
Select hot or cold water by pressing WATER
SUPPLY button.
3. Press SOAK button.
●
You can't select SOAK function during the
WATER stage.
4. Press START/HOLD button.
Add the detergent/rinse in proportion to the water
level and then close the lid.
●
In this course, your machine repeats 1-minute
operations and 4-minute pauses (soaking) until
the start of washing.
●
If the detergent is added directly onto the laundry,
it may cause discoloration as the delay gets
longer.
●
Press POWER button in order to cancel this
function.
●
The delay could be finished at slightly different
time according to the water pressure.
DELAY START
POWER
START
HOLD
START/
DELAY
1. Put the laundry into the washer and press POWER
button.
●
Make sure to leave the taps open.
2. Press DELAY START button.
1) You can select from 3 hours, up to maximum of
19 hours in increment of one hour.
2) At the end of the selected time, your machine will
have finished washing.
●
You can choose a course as you wish.
3. Press START/HOLD button.
●
Add the detergent/rinse in proportion to the water
level and then close the lid.
●
Make sure to add the detergent into the liquid
soap device.
6
Page 8
MANUAL FUNCTIONS
You can choose each course manually.
Ex) If you want to wash in the SPEEDY course, you should select "POWER-SPEEDY COURSE-WASH-START/HOLD"
WASH ONLY
POWER WASH
1. Press POWER button.
2. Select WASH.
●
Adjust the washing time by pressing
START/
HOLD
WASH button
●
You can adjust the washing time by unit of
2 minutes within the limits of 8 to 30 min.
●
Soak washing is available.
3. Press START/HOLD button.
●
Close the lid.
Note
●
The water will still remain after wash.
Select SPIN only to drain water.
●
Despite the water level being
automatically set up, you would need
to select the adequate water level
according to the laundry.
●
In the wool course, you can adjust
washing time by units of 2 minutes
within the limits of 1 to 15 min.
RINSE ONLY
POWER RINSE
SPIN ONLY
POWER SPIN
WASH + RINSE
WASH
POWER
RINSE
RINSE + SPIN
RINSE
POWER
SPIN
1. Press POWER button.
2. Select RINSE.
●
Select a rinsing frequency by pressing
START/
HOLD
RINSE button.
●
You can adjust the frequency from 1 to 5
min.
3. Press START/HOLD button.
●
Close the lid.
1. Press POWER button.
2. Select SPIN.
●
START/
HOLD
Select the spinning time by pressing SPIN
button.
●
You can adjust the time from 1 to 9 min.
●
If you select 1 min., your machine spindries the laundry slightly to avoid wrinkles.
3. Press START/HOLD button.
●
Close the lid.
1. Press POWER button.
2. Select WASH and RINSE.
●
Please adjust the washing time and
START/
HOLD
number of rinsing.
3. Press START/HOLD button.
●
Close the lid.
1. Press POWER button.
2. Select RINSE and SPIN.
●
Please adjust the number of rinsing and
spinning time.
START/
3. Press START/HOLD button.
HOLD
●
Close the lid.
Note
●
The water will still remain after rinse.
Select SPIN only to drain water.
●
Despite the water level is
automatically set up, you would need
to select the adequate water level in
case the laundry is soaked.
Note
●
If you select SPIN only, there will be
a difference between the spinning
time and the remaining time. This is
because the remaining time includes
the draining and holding time as well
as the actual spinning time. So, note
that it does not mean it is "out of
order".
Note
●
The water will still remain after rinse.
Select RISE only to drain water.
7
Page 9
INSTALLATION & MAINTENANCE
LOCK
UNLOCK
LOCK
UNLOCK
LOCK
UNLOCK
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface,
noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
LEVELLING
(Type A)
● Adjust the height control legs to make eve.
Lock
●
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order.
So, make sure that the washer is leveled properly.
The User’s Manual is for common use.
Never install the washer near water.
Do not place the washer in steamy rooms or where the
washer is directly exposed to rain.Moisture may destroy the
electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic and electrical components are affected by direct
heat,never place the washer near furnaces, boilers, etc.
Do not place under direct sunlight.
Adjustment of height
If not leveled, adjust the legs to level the washer.
● Be careful not to put in your hand under the legs.
(It may cause some injury)
Lock Nut
Adjustable
Leg
Unlock
● After slightly lifting up the machine, rotate the
adjustable leg counter-clockwise and pull
as much as need to adjust the reight.
● After putting down the machine after adjustment.
Lock
● Adjust the height and secure.
● Secure the lock nut by rotating it firmly.
● If the lock nut is not secured, the adjustable
Unlock
leg may be released.
Waterdrop mark
Cause
The front part is
lower
The back part is
lower
The left part is
lower
How to level
Level it by adjustable legs.
Adjust the height by using the adjustable rubber
or prop at the back.
Adjust the left part by using the adjustable legs
at the front and the adjustable rubber at the back.
Pull the handles located at the
right and left of the front side
and slide off.
Adjust the water drop mark to
be in the red circle pulling back
the machine slightly, and then,
push it with a feet to fix.
Fix the handles by hand
completely.
The right part is
lower
Adjust the right part of the washer by using the adjustable leg
at the front and the adjustable rubber at the back.
8
Page 10
a
b
a
b
c
LEVELLING
(Type B)
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
● Open the lid of the machine, pour water into the tub up to the level
just below the pulsator, and adjust the legs so that the pulsator is
positioned at the center of the water as shown in the figure.
● Place the machine more than
10cm away from the wall.
● Adjust the legs on feet
for levelling .
LockLoosen
CONNECTING THE WATER SUPPLY HOSE
1.Remove the adaptor
from the water
supply hose.
1. Adjust the side horizontally
first and the front
in same direction ❷ next.
2. If the thread is not
within the limit, adjust
the height of
the legs.
5. Connect the other end of the water
supply hose to the inlet water valve
at the back of the washer.
Screw the hose clockwise all the
way in.
2.First,using a "+" type
screw driver, loosen the
four screws on the adaptor.
Next,take the adaptor and
turn part(b) following the
arrow for gap about 5mm
between them.
3. Connect adaptor to the
water tap by tightening
the screws firmly.
Then, turn part (b)
following the arrow and
put (a) and (b)together.
4.Connect the water supply
hose to the adaptor. Pull down
the part (c) of the water supply
hose .When the part (c)is released,
the hose is automatically
connected to the adaptor
making a 'click' sound.
5-1.Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
Screw the hose clockwise all the way in.
If the water tap is a screw type,assemble
a water supply hose that fits to the
tap as shown.
NOTICE After completing connection, if water leaks from the hose,
then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big,remove the spacing
ring before inserting the faucet into the adaptor.
9
Page 11
Sisi belakang
70~80cm
ASSEMBLING THE RAT PROTECTION PANEL
Tilt the washer a little and lift up the panel until it clicks,
finally fix the panel with screw to the base as shown
in the figure.
IN CASE OF PUMP-DRAINED WASHER
Take out the cap-hose and
connect the outlet-hose.
Be sure to join tightly the drain hose into
the drain-outlet on the back of the
machine.
1.Insert the sound
absorbing panel
to the assembling
hole on front side
to the end.
2.If you have difficulty
inserting the panel
lift up the washer a
little and insert it
Be sure to join tightly the drain
hose into the drain-outlet
on the side of the machine.
Anti-rat cover
Install the drain hose in the
position of about 90~100cm
above the ground.
cap-hose
outlet-hose
CONNECTING THE DRAIN HOSE
(a)
After pressing the joint ring(a), insert the drain hose(b)
to drain direction.
(b)
HOW TO ADD THE FABRIC SOFTENER
●
When a proper amount (one time does) of fabric
softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.
●
Do not use detergent, bleach or starch into
the Softener Inlet.
●
Using too much softener may produce
unsatisfactory results.
●
Do not open the lid during the Spin Dry cycle.
If added too early, its effectiveness will decrease.
●
Do not leave the softener
into the Softener
Dispenser for a long time.
Because softner
became stiff.
HOW TO PUT THE DETERGENT IN
1.Open the detergent box by pulling in the direction of the arrow as shown in the
figure and then put the powder detergent in the detergent box.
2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.
Detergent Device
Put the detergent
in proportion to
water level
90~100cm
Softener Device
Softener
baseline
CAUTION : If softener is stored over the above base line, it may flow down at any time.
10
Page 12
WATER SUPPLY CONNECTOR FILTER
1.
Pull out the filter and wash well.
inlet water
valve
2.
Pull in the filter and connect
the hose to the inlet water
valve tightly.
3.
Check if there is a leakage.
Note to tighten up the
connector.
CLEANING THE FILTER NET
1. Push the upper part
of the filter and pull in.
1. Push up and
pull out the filter net.
Clean the filter net often to keep the washer clean.
2. Open the cover as
shown in the figure.
2.
Remove the collected
lint from the filter net.
HOW TO CLEAN THE FILTER
1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise
and pull out the filter.
3. Remove dirts and rotate
the filter clockwise
until it locks in position.
3. Clean the filter. 4. Close the cover and insert the
3. Clean the filter. 4.
(pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and
remove dirts.
4. Reassemble in
reverse order.
lower part of the filter in the
basket first and then push the
filter with "click" sound .
Pull down the filter net.
11
Page 13
TROUBLESHOOTING
WASHING MACHINE WON'T WORK
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
WATER IS NOT SUPPLIED
Is the water tap opened?
Is the water cut off?
Is the water supply hose
or hose connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound, and the remaining
time indicator will show "4E".
WATER DOSE NOT DRAIN
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15
minutes, a buzzer will sound,
and the remaining time indicator
will show "5E".
CHECK YOUR VOLTAGE
Call to service center
or agency.
SPINNING DOES NOT WORK
Is the laundry spread out
evenly in the washer?
Is the washer set on a sturdy flat
surface?
12
Page 14
IN CASE THE NEED FOR SERVICING ARISES.
If any problem occurs with your products,do not hestitate to call any nearby.
Name, address, telephone number is required.
SPECIFICATIONS
WASHING CAPACITY
POWER
CONSUMPTION
DIMENSIONS(mm)
WEIGHT
WATER PRESSURE
WASHING TYPE
WASH
-
550W
W640xD698xH1020
46 kg
0.05~0.78 MPa
(0.5 ~ 8.0 kg. f/cm2)
Stirring Type
STANDARD
WATER
LEVEL
EXTRA LOW
WATER USAGE
PULSATOR
ROTATING SPEED
SPINNING TUB
ROTATING SPEED
MIXIMUM
HIGH
MEDIUM
LOW
LOWEST
90 l
73 l
63 l
48 l
38 l
28 l
230
l
105 rpm
710 rpm
CODE NO. : DC68-01174A
Loading...