Samsung VAU5863B User Manual

DJ68-00075K REV(0.0
)
Vacuum Cleaner
Commercial Products
Operating Instructions
EN
EN
F
Produits commercial
Directives d’utilisation
F
ENGLISH FRANCAIS
1 ~ 8 9 ~ 16
Série VAU-5400 Série VAU-5200
EN
F
Read these instructions before operating the vacuum cleaner Lisez ces directives avant d’utiliser la balayeuse
EN
1
Fill in and retain
Index

Safety lnstructions

Warning:
The model and serial number are located on the bottom of the cleaner. For your personal records, please enter the COMPLETE model and serial number
in the spaces provided and retain this information. Your cleaner is model and has serial number It is suggested that you attach your sales receipt to this owner’s manual.
Verification of date of purchase may be required for warranty service of your SAMSUNG product.
Thank you for purchasing a Samsung vacuum cleaner. When using an electrical
appliance, basic precautions should always be followed, including the following:
To reduce the risk of fire, electric shock, or injury:
Do not leave appliance unattended when plugged in. Unplug the vacuum from the
outlet when it is not in use, or when it is being cleaned.
Do not use outdoors or on wet surfaces.
Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
Use only as described in this manual. Use only manufacturer’s recommended
attachments.
Do not use with damaged cord or plug. If appliance is not working as it should, or
has been dropped, damaged, left outdoors or dropped in water, take it to a service center.
Do not pull or carry the vacuum by the cord, or use the cord as a handle. Do not
close a door on cord, or pull the cord around sharp edges or corners. Do not run the appliance over its cord. Keep the cord away from heated surfaces.
Do not unplug the vacuum by pulling on the cord. To unplug, grasp the plug, not
the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into vacuum openings. Do not operate with any opening
blocked:Keep free of dust, lint, hair and anything that may reduce air flow.
Keep hair, loose clothing, fingers and all parts of body away from openings and
moving parts.
Do not use to pick up anything that is burning or smoking, such as cigarettes,
matches or hot ashes.
Do not use without dust bag and filters in place.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
Do not use to clean up flammable or combustible liquids such as gasoline. Do not
use the vacuum in areas where such liquids may be present.
Store your cleaner indoors in a cool, dry area.
Do not use extension cords or plug into an electrical outlet with inadequate
current carrying capacity.
Avoid vacuuming up sharp objects.
Always turn this appliance off before connecting or disconnecting the hose,
replacing bags, or removing the bottom plate for maintenance.
Unplug electrical appliances before vacuuming them.
PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS APPLIANCE
AA
ssembling Parts Checking Parts Attaching the Handle Attaching the Hose and Tools Assembled Vacuum Cleaner Parts
OO
peration ON-OFF switch Handle positions Transporting Cleaner Carrying Handle Cleaning Lightweight Flexible rugs Cleaning Tool Attachments Motor Protector Feature
MM
aintenance Replacing the Dust Bag Cleaning the Filters Replacing the Headlight Replacing the Belt Clearing Clogs
TT
hermal Protector
TT
roubleshooting
Save these instructions!
To reduce the risk of electrical shock, this appliance has a polarized plug with one blade wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to replace the outlet. Do not change the plug in any way.
2~3
3~4
4~7
7 8
EN
2

1. Assembling Parts

Checking Parts
Step 1. Attaching the Handle
You should have the following items when you unpack your vacuum cleaner.
A. Owner’s manual B. Handle C. Extension wand D. Crevice tool E. Combination tool F. Belt G. Vacuum body
Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body.
1-1
1-2
Insert the screw provided into the existing hole. Tighten the screw securely with a screwdriver. Before securing the handle, please check that the handle is fitted to the vacuum body and make sure there’s no gap.
1-3
Step 2. Attaching the Hose and Tools
Slide the end of the hose wand with tabs into the suction intake valve.
Slide the extension wand and the crevice tool together into the storage clip.
1-4 1-5
ABCDEF G
EN
3

2. Operation

ON-OFF Switch
Assembled Vacuum Cleaner Parts
The assembled cleaner will look like the illustration to the left.
1.Handle
2.ON/OFF switch
3.Quick release cord hook
4.Exhaust filter
5.Crevice tool
6.Handle release
7.Carrying handle
8.Hose
9.Extension wand
10.Combination tool
WARNING!
OPERATE THE VACUUM CLEANER ONLY AT THE VOLTAGE SPECIFIED ON THE NAMEPLATE.
1.To turn cleaner ON(I), press the ON/OFF switch to the ON position.
2.To the cleaner OFF(O), press the ON/OFF switch to the OFF position.
Handle positions
The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating for general operation on carpet and floors; low for reaching under low furniture. Step on handle release pedal to lower handle.
Transporting cleaner
To move your cleaner from room to room, put the handle in upright position, tilt the cleaner back on its rear wheels and push forward.
2-1 2-2 2-3
Front Back
1
2
4
8
3
5 9
7
10
6
1-7
EN
4
Carrying handle
The cleaner can also be moved by using the carrying handle.
Cleaning lightweight flexible rugs
Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle(front of cleaner)and will prevent rug from clinging to cleaner. Continue to lift front of cleaner so that when you have reached the edge, it is completely off the rug. Move cleaner back to start again, lower front of cleaner, and use only forward strokes.
Cleaning Tool attachments
Attachment tools can be used to clean furniture or drapes, on stairs or in corners. Place the vacuum on the floor with the handle in the upright position.
while using attachment tools. Do not place the vacuum on top of furniture or steps as the brushroller may cause damage
.
A. Combination tool:
Two types of cleaning tools are included in one attachment: rotate for desired tool.
Use brush side to dust furniture,
blinds, books, lamps, shelves.
Use upholstery side for curtains,
draperies, cushions, fabrics.
B. Crevice tool:
Use in corners, on stairs, baseboards, and behind furniture.
C. Extension Wand:
Use with desired attachments and narrow wand for a longer reach.
2-4
Carpet height adjustment
Carpet and rug cleaning takes place at the nozzle (A).
When it is necessary to raise and lower the nozzle for various carpet pile heights, rotate the nozzle control knob (B) to the desired setting.
2-7
2-8
2-8
2-6
2-5
A
B
C
For maximum cleaning performance,
The following carpet height settings are recommended:
Lowest setting: for all types of carpet
Higher settings: for very deep pile
carpet where easier pushing effort is desired, while maintaining good cleaning performance.
Note: If the cleaner is difficult to push, rotate knob to the next higher setting.

3. Maintenance

Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness.
Check the dust bag from time to time. Change the dust bag when dirt reaches the dotted line. If more dirt than this accumulates, your cleaner will not operate effectively.
Note: All new carpet has loose fibers which can fill the bag quickly while vacuuming.
When to replace the Dust bag
Loading...
+ 12 hidden pages