How it Works
Samsung
Loading...
UN65FH6001
User Manual
2 pgs822.51 Kb0
User Manual
2 pgs2.54 Mb0

Samsung 6001, 6003, UN55FH6003, UN60FH6003, UN65FH6001 User Manual

I I I
I Figuresandillustrationsinthb UserManualareprovidedforreference
onlyand maydifferfromactualproductappearance.Productdesignand spedficationsmaybechangedwithoatnotbe.
Important Warranty Information Regarding Television Format Viewing
'z See the warranty card for more information on warranty
terms.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG willadditionally provide Warranty Repair Service in the United States on SAMSUNG products purctqased in Canada, and in Canada on SAMSUNG products purctqased in the United States, for the warranty period originally specified, and to ttqeOriginal Purchaser only. The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Billof Sale as Proof of Purchase must be presented to the Service Center.
IIIIIIIIIIIIIIIIIIIIIIIIII
Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanstqip, and only those encountered innormal use of the product. Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges orreplacements, accessories, options, upgrades, or consumables. Forthe location of aSAMSUNG Authorized Service Center, please call tolPfree:
-- In the United States : 1-800-SAMSUNG (1-800-726-7864
-- In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such asipeg picture files) or still image elements (such as TV channel Iogos, TV shows or movbs inpanorama or 4:3 format, stock or news scroll bars, etc.) on the screen. The constant display of still pictures can cause ghosting or image burnqn (image retention) on the LED screen, which will affect image quality. To reduce the risk ofthis effect, please follow the recommendations below:
- Avoid displaying the same TV channel for long periods.
- Always try to display any image infull screen mode. Use the TV's Picture Options menu to select the optimal screen size.
- Reduce brightness and contrast values to the minimum required to achbve the desired picture quality. Values that exceed the minimum may speed up the burnqn process.
- Frequently useall TV features designed to reduce image retention and screen burnqn. Refer to proper user manual section for
details.
'uContact SAMSUNGWORLDWIDE i IIIf youhaveanyquestionsor comrnentsrelatingtoSamsungproducts, uu
_ phasecontactthe SAMSUNGcusternercareceuter.
,, ,,
,,
m
,,
m
(French) m m
L............................................ a
BN68 05495A 01
@2013 Samsung Electronics Co., Ltd. All rights reserved.
-t-
' Advanced Settin s
_ Available in Standard and Movie mode only.
Your TV hastwo kinds of menus, the Main menu and the various Tools menus. The Main menu gives you access to most or all of the menu options available on your TV. The Tools menus display a selected number of frequently used menu options that change depending on the screen you are viewing. A Tools menu symbol ([])in the lower right side of the screen indicates that a Tools menu isavailable.
The Main menu has seven primary categories:
" Picture o Input
" Sound o Application
" Channel o Support
- Setup
To vies!the Main menu, press the MENU button on your remote. To vies! a Tools menu, press the TOOLS button onyour remote. 's_'The menu options that appear in the Main menu depend
on the Source you have selected. For example, if you have selected the HDMI source, the Channel category will not appear. To see the Channel category, you must first select TV inthe Source List.
The Menu options are presented below, arranged by Main menu categories. A Tools button symbol (_t_l) nextto an option name indicates the option is also available in one of the Tools menus.
Mode
Select your preferred picture mode. _'_'When your TV is connected to a PC, you can only select
Entertain and Standard.
m Dynamic: Brightens the screen. Suitable for a bright room. m Standard: Suitable for a normal.
m Movie: Darkens the screen, making it less glary. Suitable for
watching movbs in adarkened room.
m Entertain: Sharpens the picture. Suitable for games.
_ Only available when the TV is connected to a PC.
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
m Backlight: Adjusts the brightness of the screen by adjusting the
brightness of the individual pixeb.
m Contrast: Increases or decreases thecontrast between dark and
light areasof the picture.
m Brightness: Adjusts the brightness of the screen. Not as
effective as BacHight. m Sharpness: Sharpens or dulls the edges of objects. m Color: Adjusts the color saturation. The higher the Color setting,
the more intense the color. Los! settings remove color and the
picture becomes black, white and gray. m Tint (G/R): Adjusts the amount of green and red in the picture.
As you increase the amount of green, the amount of red
decreases and vice versa. '_' When the TV is connected to a PC, you can only make
changes to Backlight, Contrast, Brightness, and Sharpness.
Compared to previous models, new Samsung TVs offer a more precise picture with more precise controls.
'_' When your TV is connected to a PC, you can only make
changes to Gamma and White Balance.
[] Color Space (Auto / Native): Auto automatically matches the
range of colors available to create pictures to the color range of the video source. NatNe provides a color range wider than the color range of the video source.
[] White Balance: Adjusts the color temperature of the picture so
that white objects look white (instead of, for example, slightly pink or slightly yellow) and the overall color of the picture looks natural.
R-Offset / G-Offset / B-Offset: Adjusts each color's (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjusts each color's (red, green, blue)brightness.
Reset: Resets the White Balance to it's default settings. [] Gamma: Adjusts the primary color intensity. [] Dynamic Contrast (Off / Low / Medium / High): Adjusts the
screen contrast.
[] Black Tone (OFF/ Dark / Darker / Darkest): Selects the black
levelto adjust the screen depth. Darker settings make blacks
look darker. [] Flesh Tone: Adjusts the amount of red in skin tones. [] Motion Lighting (OFF/On): When on, the TV automatically
adjusts the brightness of the screen in response to the
brightness of the room. In bright light, the screen brightens. In
dim light, the screen dims.
_' Available in Standard mode only.
Picture Options
'_' When theTV is connected to a PC, you can only make
changes to the Color Tone, Size and HDMI Black Level.
[] Color Tone (Cool / Standard / Warm1 / Warm2): Cool makes
the picture bluer (cooler). Warm 1 and Warm 2 make the picture
redder (warmer).
_' Warm1 and Warm2 are deactivated when the picture
mode is set to Dynamic.
[] Size: Set the size and aspect ratio of the picture on the screen.
Your cable box or satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use
the TVs 16:9 mode most of the time.
16:9: Sets the picture to the 16:9 wide screen format.
Zoom1 : Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.
Zoom2: Provides larger magnification of the picture. Sides, top,
and bottom arecut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture
fits the entire screen.
4:3: Sets the picture to the old, 4:3 format and puts black orgray
borders on the right and left of the picture.
'_' Do not watch your TV in the 4:3 format for a long time.
Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which
is not covered by the warranty. Screen Fit: Displays the full image without any cut-off when your TV is inputting H DMI(720p/1080i/1080p) or Component (1080i/1080p) HD signals.
_' HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
(1920x1080) or 720p (1280x720) resolution.
_' You can adjust and store settings for each external device you
have connected to an input on the TV. Picture Sizes available by Input Source are listed below:
-2-
ATV,AV,Component (480i,480p) 16:9, Zoom1, Zoom2,
4:3
DTV(1080i, 1080p), Component (1080i, 16:9, Wide Fit, 4:3, 1080p),HDMI (720p, 1080i, 1080p) Screen Fit
[] Digital Noise Filter (OFF/ Low / Medium / High / Auto) : Ifthe
broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. '_' When the signal is weak, try all the Digital Noise Filter
options until the TV displays the best picture.
[] HDMI Black Level (Normal / Low) : For HDMI signals, select
the black bvel to adjust the screen depth. Los! make blacks look darker.
'_ Available only inHDMI mode (RGB signals).
[] Film Mode (OFF/Auto) : Sets the TVto automatically sense and
process film signals from all sources and adjusts the picture for optimum quality. '_' Available inATV, DTV (interlace), AV,COMPONENT (480i /
1080i) and HDMI (480i/1080%
[] Auto Motion Plus (OFF/ Clear / Standard / Smooth / Custom /
Demo): Enhances motion in fast moving scenes. '_' The info screen on your TV displays the resolution and
frequency of the incoming video signal (60Hz).This displayed frequency is not what the TV is displaying by using the Auto Motion Plus function.
[] LED Motion Plus (OFF/ On): Removes drag from fast scenes
with a lot of movement to provide a clear picture.
Picture Reset
picture settings to their factory defaults.
Mode
[] Standard: Selects the normal sound mode. [] Music: Emphasizes music over voices. [] Movie: Provides the best sound for movies. [] Clear Voice: Emphasizes voices over other sounds. [] Amplify: Increase the intensity of high-frequency sounds to allow
a better listening experience for the hearing impaired.
Equalizer
Available in Standard sound mode only. [] Balance L/R: Adjusts the balance bets!een the right and left
speaker.
[] 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth frequencies.
[] Reset: Resets the equalizer to its default settings.
SRS TruSurround HD
Available in Standard sound mode only. SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multbhannel content through two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal tebvbion speakers, it is fully compatibb with all
multichannel formats.
Preferred Lan ua e
Digital channeb only. DigitaPTV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program into foreign languages). '_' You can only select a language from among the ones being
broadcast.
Multi=Track Sound (MTS}
Analog channeb only. [] Mono: Select for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal. [] Stereo: Select for channels that are broadcasting instereo. [] SAP: Select to listen to the Separate Audio Program, which is
usually aforeignqanguage translation. '_' Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP
Auto Volume
Because each station has itsown broadcasting conditions, the volume may fluctuate each time you change the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is los!.
Sound Reset
[] Reset All: Resets all sound settings to the factory defaults.
_3Memorizing Channels
When you first set up your TV using Plug & Play, the TV memorized the channels that were avaibbb over the air or through your cable system and added them to the Channel List. The Antenna and Auto program functions described below let you re-run the channel memorization function without having to re-run the Plug & Play procedure.
Antenna _
Before your television can memorize the available channels, you must select your TV's signal source, Air (using an antenna) or Cable. Select Menu >Channel > Antenna > Air or Cable. After you have selected the signal source, go on to theAuto Program function.
'_' Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example, ifyou receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture.
-3-
The Auto Program function memorizes all ctsannels that are available over ttseair or ttsrough your cable system and adds ttsem to the Channel List.
To start Auto Program, follow these steps:
1. Pust_ MENU Eli -_ Channel _ Auto Program -_ ENTER _ on your remote. The Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV signal.
Air Ifyour TV is connected to an antenna choose Air, and ttqen press ENTER _. The TV will automatically start memorizing channeb. Cable Ifyour TV is connected to a cable outlet, ctqoose Cable, and then press ENTERS. Go to Step 3. Auto
Ifyou choose Auto, and then press ENTERS, the TV will automatically select the correct Antenna source. Go to Step 3.
3. On the (}able Typescreen, use the _1/1_/_/_ buttons to select the type of digital and analog cable systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select Start, and then press ENTER_. The TV will start memorizing
channels.
'z Channel memorizationcantakeup to45 minutes,depending
onyour cablesystem.
'z Memorized channeb areadded totheAdded Channels
list.These arethechanneb you willseewhen you usethe Channelbuttonson yourremote.
Clear Scrambled Channel
This function filters out scrambbd channeb after Auto Program is completed. This process may take up to 20_30 minutes. 'z Press the ENTER _ button to stop the Clear Scrambled
Channel.
'z This function is only available inCable mode.
C3Managing Channels
Channel List
Seeyour list ofAdded channels, Favorite channels, or channeb you've scheduled for viewing. Add or delete Favorite channels, add ordelete channeb from the Added Channeb list, schedule channels orprograms for viewing. Watch a channel by selecting the channel inthe All Channels, Added Channels, or Favorite screen, pressing the • / _' buttons, and then pressing the ENTER_ button.
Channel List Screens icons are listed on the left side. Select an icon using the &IT buttons to view each list.
-4-
[] _ All Channels: Shows all currently available channels including
those you deleted from the Added Channels list.
[] _ Added Channels: Shows allAdded Channels. These are the
channels that appear when you press the CH button. [] _ Favorite: Shows allfavorite channels. [] _ Programmed: Shows all channels and programs currently
scheduled using Timer Viewing.
'_' Remote control buttons active on the Channel List screen.
* Green (Zoom): Enlarges orshrinks a channel number. * Yellow (Select): Move thecursor to achannel. Press the Yellow
button to select thechannel. A # mark appears. Repeat to select additional channels. Then, open the Toolsmenu and apply a function to the channels youselected.
* _r3(Tools): Displaysthe Channel List Tools menu.(The Tools
menus maydiffer depending on the situation.)
Display Icons Used in the Channel List Screens
-7 A selected channel. A Favorite channel.
(_) A reserved program.
A program currently being broadcast.
The Channel List Tools Menu
The Channel List -fbob menu contains most of the functions you can use orsthe All Channel, Added Channels, and Favorite List screens, [b view, select a list screen, select a channel, and then press the TOOLS button, [] Add / Delete: Delete a ctqannel from or add a ctqannelto the
Added Channels list.
To delete ctqanneb from the Added Channels list, follow ttqese steps:
1. Select one or more ctqanneb in the Added Channels list using the _/_ buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. TheTools menu appears.
3. Select Delete inthe Tools menu, and then press the ENTER button.
To add channels to the Added Channels list, follow these steps:
1. Select one or more channels in the All Channels listusing the _k/_ buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. TheTools menu appears.
3. Select Add in the Tools menu, and then press the ENTER button.
'_' All deleted channels will be shown on the All Channels list.
You add channels back to the Added Channels list on the All Channels list.
'_' A gray-colored channel indicates the channel has been
deleted from the Added Channels list.
'_' The Add menu option only appears for deleted channels.
[] Add to Favorite/Delete from Favorite Ii_i_'_: Lets you add
channels to and delete channels from your Favorites list.
To add channels to the Favorites list,follow these steps:
1. Select one or more channels in the All Channels listusing the
• /V buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. TheTools menu appears.
3. Select Add to Favorite in the Tools menu, and then press the ENTER_ button.
To delete channels from the Favorites list, follow these steps:
1. Select one or more channels in the Favorite Channeb list using the _k/T buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. TheTools menu appears.
3. Select Delete from Favorite in the Tools menu, and then press the ENTER _ button.
[] Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you arewatching another channel. You must set the current time first inthe Time > Clock
function to use Time Viewing.
To schedule a channel, follow these steps:
1. Select a channel inthe Added Channels list using the A/V buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. TheTools menu appears.
3. Select Time Viewing in the Tools menu, and then press the ENTER_ button. The Time Viewing screen appears.
4. Use the _l/!_ buttons to move from entry field to entry field and the A/_ buttons to change the entries. Where numbers aredisplayed, you can also enter numbers directly using the number keypad on your remote.
'_' If you select Everyday or Every Week, the date you
select in the Date field becomes the start date for your scheduled viewing. For Everyday, the TV will turn on every day, at the time you selected, starting from that date. For Everyweek, the TV will turn on every week, on the same day of the week as the start date you selected, at the time you selected, from that day on. If you select Once, the TVwill turn on once, on the date and time you selected.
5. Press the ENTER _ button on your remote when done. :_' Only Added Channels can be scheduled. :_' Scheduled programs and channels are displayed in the
Programmed List.
'_' When you select adigital channel, press the !_ button to
view the digital program list. Ifyou highlight a program in the list, and then press the ENTERS(Schedule) button,
you set Timer Viewing for that program directly. [] Select All: Select allthe channels in the displayed channel list. [] Deselect All: Desebct all the selected displayed channels.
'_' You can only select Deselect All when one or more
channels are selected. [] Channel Name Edit: Analog channels only. Lets you assign a
name of up to five characters to an analog channel. For example, Hist, Food, Golf, etc. Thismakes it easier to find and select a channel.
[] Auto Program: See Auto Program under Memorizing Channels.
(_ Programmed List (on the Channel List Screen)
The Programmed list displays the channels and programs you have scheduled for viewing using the Time Viewing function. You can vies!, modify, ordelete a show you have scheduled using the functions on the Programmed List screen Tools menu.
Programmed List Screen Tools Menu [] Change Info: Change the scheduling information for a show or
channel you have scheduled.
To change the information, follow these steps:
1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER_ button.
2. On the Programmed List screen, select the show or channel entryyou want to change, and then press the TOOLS button. TheTools Menu appears.
3. Select Change Info. and then press the ENTER _ button. TheTime Viewing screen appears.
4. Use the _1/!_ buttons to move from entry field to entry field and the A/_ buttons to change the entries. Where numbers aredisplayed, you can also enter numbers directly using the number keypad on your remote.
5. Press the ENTER _ button when done.
[] Cancel Schedules: Cancel a show or channel you have
scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER_ button.
2. On the Programmed List screen, select the show or channel entryyou want to cancel, and then press the TOOLS button. TheTools Menu appears.
3. Select Cancel Schedules, and then press the ENTER button. The Cancel Schedule screen appears.
4. Select OK, and then press the ENTER _ button.
[] Information: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel entryyou want information for, and then press the TOOLS button. The Tools Menu appears.
3. Select Information, and then press the ENTER _ button. The Time Viewing Information screen appears.
4. Select Change Info and press the ENTER_ button to change information, orselect Close and press the ENTER_ button to close the Information screen.
[] Select All / Deselect All: You can select or desebct all
channels in ttqectqannel list.
C3Other Channel Menu Functions
Channel Mode (Added Channels/Favorite Channels)
Letsyou select the channel list displayed when you press the ACHV (Channel) button on your remote. For example, if you select Favorite Channeb, you will only see Favorite channels when you press the ACHV button.
Fine Tune
Analog channeB only. Ifthe reception is clear,you do not have to fine tune the channel,
as this is done automatically during the search and store operation. Ifthe signal isweak or distorted, fine tune the channel manually.
'_' Select the channel, and then select Fine Tune. '_' Fine tuned channels that have been saved are marked with
an asterisk "*"on the right-hand side of the channel number inthe channel banner.
'_' To reset fine-tuning, select the channel, select Fine Tune, and
then select Reset on the Fine Tune screen.
Plug & Play
Letsyou re-run the Plug & Play initialsetup procedure. For instructions, see your Quick Start Guide.
Language Set the menu language. '_' Choose between English, EspaSol, and Francais.
_3 Setting the Time
Time
'_' The time you set will appear when you press the INFO
button.
[] Clock: Set the clock so you can use the various timer features
of the TV. '_' If you disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTER _ and select Auto or Manual, and then press ENTER _ again.
if you selected Auto: TheTV will automatically download the correct time from a
digital channel.
- Select Time Zone, and then press the ENTER_ button.
Usethe_/_ buttons to select your Time Zone, and then press ENTER _.
- Select DST (Daylight Savings Time), and then press
ENTER_. Select On if you want to turn the DST adjustment on and off manually. Select OFFto turn offthe DST adjustment. Select Auto if you want the TV to adjust to DST automatically. Press ENTER _ when done.
'_' DST and Time Zone function are only available when
the Clock Mode is set to Auto.
if you selected Manual: The Clock Set screen appears. Use the _/T buttons to change the values in each field or use the number buttons to enter the values directly. Use the _/!_ buttons to move from field to field. When done with all the fields, press ENTER _.
'_ Available only when Clock Mode is set to Manual.
[] Sleep Timer
Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
'_' To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you select. You can set three different on/off timer settings. '_' You must set the clock first.
[] On Time / OFFTime: Set the hour, minute, am/pm, and
Activate/Inactivate fields for the On Time and OFFTime. Use the
_1/!_ buttons to move from field to field. Use the A/T buttons to change the values in each field. To activate the timer with the setting you have chosen, set the Activate/Inactivate field to Activate.
[] Volume: Set the desired loudness. [] Contents: To select what will be turned on when the timer
setting is activated. Youcan set the TV to turn on a specific channel or play back contents such as photo or audio files. Use the ,_/_ buttons to move to move to the Contents field, and then press the ENTER_ button. The Contents screen appears. Use the _1/!_ buttons to move from field to field. Use the A/_ buttons to change the values in each field.
- TV/USB: Select TV or USB. The USB device must be
connected to your TV before you can select USB.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo)files on the USB device:
'_' The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
'_' The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the ,_/_ buttons to move to the field under Music or the field under Photo, and then press the ENTER button. The TV displays a single folder (the Root folder) and the type or name of the device.
2. Press the ENTER _ button. A list of folders on the device appears. '_' Ifthere are no folders on your device, press the
Yellow select button to select the Root folder, and then press the RETURN button. The Timer screen re-appears.
3. Use the A/_ buttons to highlight a folder that contains music or photos, and then press the Yellow select button to select the folder.
4. Press the RETURN button. The Timer screen re-appears.
[] Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat-Sun
or Manual. If you select Manual, you can select the days you want to activate the timer by using the _1/_ buttons to highlight the day, and then pressing the ENTER _ button. To unselect a
day, highlight it, and then press the ENTER _ button. When you finished making all your selections on theTimer screen, press either the ENTER _ or RETURN button.
Other Features
Program Rating Lock
The Program Rating Lock feature lets you block programs you've determined are inappropriate for your children based on the program's ratings. To access the Program Rating Lock feature and make any changes, you must enter a PIN (personal identification number). Towatch a blocked program, you must also enter the same PIN.
'_' Program Rating Lock is not available inHDMI or
Component mode.
'_' The default PIN number of a new TV set is "0-0-0-0". You can
set your own PiN using the Change PIN function.
How It Works
When you access the Program Rating Lock Menu functions for the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen closes and the Program Rating Lock Menu appears. Every time you access the Program Rating Lock functions, the PIN screen will appear and you must enter a PIN.
When the Rating Lock screen appears, select Program Rating Lock, and then press ENTER _. Select On, and then press the ENTER_ key again. Depending on what type of programs or movies you want to block, select one of the options on the screen, and then press the ENTER _ button. The options are listed below:
[] TV Parental Guidelines: Youcars block TV programs based
on their ratings. This function allows you to control what your
children are watching. [] MPAA Rating: You can block movies based on their MPAA
ratings. The Motion Picture Association of America (MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children. [] Canadian English: You can block TV programs based on their
Anglophone Canadian ratings. [] Canadian French: You can block TV programs based on their
French Canadian ratings. [] Downloadable U.S. Rating: Parental restriction information can
be used while watching DW channels.
Locking/Blocking Programs or Movies You lock or block programs and/or movbs in essentially the same
way for each option. Each option displays a grid or table. All the tables have ratings listed on the left. The TV Parental Guidelines option also has kinds of content listed across the top: ALL: Lock all TV ratings. / FV: Fantasy violence / V:Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog.
To IocWblock movies or shows with certain ratings and/or kinds of content, click the square nextto the rating and/or under the kind of content. A lock appears. To unlocWunblock, click the square again. When you click alos! rating, all the ratings above itwill also display locks. You can also Allow All or Lock All. When done, press the RETURN button on your remote.
[] Change PIN: The Change PIN screen will appear. Choose any
4digits for your PIN and enter them in Enter New PIN fields. Re-enter the same 4 digits in Confirm New PIN fields. When the Change PIN screen disappears, press the OK button. The TV has memorized your new PIN. '_' If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to "0-0-0-0" : POWER (off) _ MUTE _ 8 _ 2_ 4 _ POWER (on)
Game Mode (On/OFF)
When you connect a game console such as a PlayStation TM or XboxTM to your TV, you can enjoy a more realistic gaming experbnce by turning on the Game Mode function.
'_' Precautions and limitations for game mode:
° Before you disconnect the game console and connect another
exfernal device, set Game Mode to Off inthe setup menu.
° If you displaythe TV menu in Game Mode, the screen shakes
slightly.
'_ Game Mode is not available when the input source isset to
TV.
'_' After connecting the game console, set Game Mode to On.
You may notice slightly reduced picture quality.
Caption
(On-Screen Text Dialogue) [] Caption: You can switch the caption function on or off. If
captions are not available, theywill not be displayed on the screen.
'_' The Caption feature does not work in Component or
HDMI mode.
[] Caption Mode: Youcan select the desired caption mode.
Default / CCl ~CC4 / Text1 ~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV.(Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.) Default / Service1 ~Service6 / CC1 ~CC4 / Text1 ~Text4: (Digitalchannels only) The Digital Captions function works with digital channeb. '_' Service1~6 may not be available in digital caption mode
depending on the broadcast.
[] Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard and Large. The default is Standard.
Font Style: Options include Default and Styles 0 to 7. The default is Style0.
Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letters. The default isWhite.
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the captions. The default is Black. Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing. Background Opacity: This adjusts the opacity of thecaption background. Options include Default, Transparent, Translucent,
Solid and Flashing.
Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default. '_' Digital Caption Options are available only when you can
select Default and Service1 ~ Service6 in Caption Mode.
'_' The Foreground and Background cannot be set to the
same color.
Melody
Letsyou control whether a melody plays when the TV isturned on or off,
'_' The Melody does not play:
° When no sound is output from the TV because the MUTE
button has been pressed.
• When no sound isoutput from the TV because the volume has been reduced to minimum with the VOL - button.
° When the TV is turned off by the Sleep Timer function.
Auto Protection Time
[] Auto Protection Time (OFF/ 2 hours / 4 hours / 8 hours / 10
hours): Ifthe screen remains idle with a still image for a certain
[] Reset: Reset all settings to the factory defaults.
'_ The PIN input screen appears before the setup screen. '_' Enter your 4-digit PIN. Change the PIN using the Change
PiN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest firmware from samsung.com to a USB memory device.
HD Connection Guide
Referto this information when connecting external devices to the TV.
Contact Samsun
Vies! this information when your TV does not work properly or when you want to upgrade the softs!are. You can find information regarding our call centers and how to download products and software.
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MS(}) device.
Connecting a USB Device
1. Turn on your TV.
period of time you define, the screen saver is activated to prevent 2. Connect a USB device containing photo, music, and/or movie
the formation of ghost images on the screen, files to the USB jack on the back of theTV. A pop up window
Eco Solution
[] Energy Saving (Off / Low / Medium / High / Picture OFF):
This adjust the brightness of the TV in order to reduce power consumption. Ifyou select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume
button to turn on the screen.
[] No Signal Power Off (OFF/ 15 min. / 30 min. / 60 rain.): Sets
how quickly the TV switches to standby mode, if no picture is being received. _ Disabled when the PC is in power saving mode.
[] Auto Power OFF(OFF/On): The TVwill be automatically turned
off when no user operation is received for 4 hours.
appears.
3. Press the MED_A,P button on your remote. The Media Play menu appears.
_3Using the Media Play Menu
Self Diagnosis
[] Picture Test: Use to check for picture problems. If the problem
appears inthe test picture, select Yes and follow the directions orsthe screen.
[] Sound Test: Use the builtqn melody sound to check for sound
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
[] Signal Strength: (Digital channels only) An HD channeFs
reception quality is either perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
To open Media Play in the Menu, follow these steps:
1. Press the MENU button. Then, press the A or _ button to select Application on the left, and ttqenpress ttqe ENTER button.
2. Press the A or _' button to select Media Play (USB), and then press the ENTER _ button.
3. Press the "_ or I_ button to select an icors (Videos, Music, Photos, Settings), and then press the ENTER _ button.
'_' Media Play might not work properly with unlicensed
multimedia files.
'_' Need-to-Know List before using Media Play (USB)
° The file system supports FAT16, FAT32 and NTFS. ° Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
° Media Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Devices should be connected directly to the TV's USB port. USB HDD is not supported.
-5- -6- -7- -8-
[UFH6003-ZA]BN68-05495A-00ENGindd 1 2013-07-29 nn9:24:40
I I I
° Before connecting your device to the TV, please back up your
files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
° A USB device that requires high power (more than 0.5A) may not
be supported.
° Do not disconnect the USB device while it is loading. ° The higher the resolution of the image, the longer it takes to
display on the screen.
° If a file is corrupted or the TV does not support the file type, the
"Not Supported File Format" message appears.
° The TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management (DRM) is a technology that supports the creation, distribution, and management of digital content in an integrated and comprehensive way, including protecting the rights and interests of content providers, preventing illegal copying of contents, and managing billing and settlements.
° PTP devices are not supported. ° If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be recognized or may malfunction.
° If the TV has no input during the time period set in Auto
Protection Time, the Screensaver will run.
° The power-saving mode of some external hard disk drives may
be released automatically when your connect them to the TV.
° If you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
° If a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played, connect the USB device to a PC, format the device, and check the connection.
° If a file you deleted from the PC is ,still found when you run Media
Play, use the "Empty the Recycle Bin" function on the PC to
permanently delete the file.
° Photos only supports the sequential jpeg format. ° The Videos option does not support the scene search and
thumbnail functions.
° If the number of files and folders saved on a USB storage device is
over approximately 4000, the files and folders may not appear and some folders may not open.
° The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
° The media may not be playing smoothly when using the device
lower than USB 2.0.
Videos
1. In the Media Play menu, press the _ or !_ button to select Videos, and then press the ENTER_ button.
2. Press the 4/_/A/T buttons to select a video in the file list.
3. Press the ENTER _ button or [_ (Play)button.
Thefile name is displayed on the top of the screen with the playing time.
Ifvideo time information is unknown, playing time and the progress bar are not displayed.
During video playback, you can search using the -ql and
_. buttons.
'_' In this mode, you can play movie clips contained in a game,
but you cannot play the game itself.
-9-
o Supported Subtitle Formats
External
MPEG4timedtext
SAMI
SubRip SubViewer MicroDVD
SubStationAlpha
AdvancedSubStationAlpha
Internal
Xsub
SubStationAlpha
AdvancedSubStationAlpha
SubRip
MPEG4Timedtext
o Supported Video Formats
ii¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i¸i!ii#iii_i!i_i_!_i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiill
ttxt
sm_ srt sub
sub or txt
ssa ass
iiiiiiiii!i!!!!!i!iiiiiii@_ii_:J_!_iiiiiiiiiii!i!i!iiiii!iiiii!iii
AVI MKV MKV MKV MP4
Picture Format
Text Format Text Format Text Format Text Format
DivX
311/4.x/5 1 1920x1080 6-_30 80Mbps
/60
*rap4 MP4 H264 1920x1080 6-_30 80Mbps
AVC 1920x1080 6-_30 80Mbps
MJPEG 640x480 6-_30 10Mbps
DivX
311/4.x/5 1 1920x1080 6-30 80Mbps
/60
*avi AVI, MPEG4 SP
1920x1080 6-30 80Mbps
*mkv MKV /ASP
H264 1920x1080 6-_30 80Mbps
MJPEG 640x480 6-_30 10Mbps
DivX 3 11
/ 4x/5,1 1920x1080 6-_30 80Mbps
/60
ASF
MPEG4 SP
1920x1080 6-_30 80Mbps
/ ASP
H264 1920x1080 6-_30 80Mbps
*ts MPEG2 1920x1080 6-_30 80Mbps
TS H 264 BP
1920x1080 6-30 80Mbps
*m2ts / MP/ HP
MPEG1 1920x1080 24/25/30 80Mbps
*dat
MPEG2 1920x1080 24/25/30 30Mbps
PS
H 264 BP
*rob / MP/ HP 1920x1080 6-_30 80Mbps
MPEG4 SP
1920x1080 6-_30 80Mbps
*3gp 3GPP /ASP
H264 1920x1080 6-_30 80Mbps H264 1920x1080 6-_30 30Mbps
*fly flash
*swf formats Sorenson
1920x1080 6-_30 80Mbps
H2e3
MP3 /
ADPCM /
AAC
MP3 / AC3 / LPCM /
ADPCM
/ DTS Core
MP3 / AC3 / LPCM /
ADPCM
/ WMA / WMA
Pro
AC3 / AAC / MP3 / DD+ /
HE AAC
AC3 /
MPEG /
LPCM /
AAC
MP3
MP3
Other Restrictions Photos
,_Video content will not play, or not play correctly, ifttlere is anerror
inthe content or the container.
,_Sound or video may not work if the contents have astandard
bit rate/frame rate above the compatible Frame/sec listed in the Supported Video Formats table.
supported.
,_The menu may take longer to appear if the video's bit rate
exceeds 10Mbps.
,_Video content can not be played if there are many contents in 1. In the Media Play menu, press the 4 or _* button to select
one file. Photos, then press the ENTER _ button.
2. Press the _I/_/A/T buttons to select a photoin the file list. Supports up to H.264, Level 4.1 H.264 FMO / ASO / RS, VC1 SP/ MP / AP L4 and AVCHD are not supported. MPEG4 SP, ASP :
- Below 1280 x 720:60 frame max
- Above 1280 x 720:30 frame max H.263 is not supported. GMC is not support.
Supports up to WMA7, 8, 9STD, 9 PRO, 10 PRO WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR
mode of WMA Pro isnot supported) WMA Lossless is not supported.
3. Press the ENTER _ button or [_ (Play)button.
'_' NOTE
• While a photo list isdisplayed, press the _ (Play)/ ENTERF4J button onthe remote control to start aslide show.
" All filesin the filelist section will be displayed inthe slideshow. " During the slideshow, files are displayed inorder. " During the slideshow, you can adjust the slide show speed
using(_) (REW)or (_) (FF) button.
" Youcan move to other files using _1or I_ button.
_' Media Play can play Music files automatically during a Slide
Show if Background Music isset to On.
'_' You cannot change the Mode in Background Music until the
Background Music file has finished loading.
oSupported Photo Formats
Music
1. In the Media Play menu, press the _1or !_ button to select Music, and then press the ENTER_ button.
2. Press the 4/I_/A/T buttons to select the desired Music in the file list.
3. Press the ENTER _ button or _ (Play) button.
'_ During music playback, you can search using the ,_ and
!_ button.
_' [_ (REW) and _ (FF) buttons do not function during
play.
_' Media Play only displays files with MP3 and PCM file
extension. Other file extensions are not displayed, even if they are saved on the same USB device.
_' If the sound is abnormal when playing MP3 files, adiust the
Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)
Other Restrictions
" CMYK, YCOK Color space JPEG are not supported.
Playing Multiple Files
[] Playing selected video/music/photo files
1. On the File List screen, highlight a file, and then press the Yellow button on your remote.
2. Repeat Step 1 to select multiple files.
'_' NOTE
° A _ mark appears to the left of the selected files. " To cancel a selection, press the Yellow button again. " To deselect all selected files, press the TOOLS button, select
Deselect All, and then the ENTER _4 _button.
3. Press the TOOLS button, select Play Selected Contents, and then press the ENTER _ button.
[] Playing a video/music/photo folder
1. With the folders on your USB device displayed, use the
_/1_/_/_ buttons to highlight a folder.
2. Press the TOOLS button, select Play Folder, and then press the ENTER _ button.
-10-
Media Play =Additional Functions
[] Videos/Music/Photos Play Option menus When playing a file, press the TOOLS button.
Repeat Mode
Picture Size Picture Mode
Auto Motion
Plus Sound Mode
Subtitle Setting
Audio Format
Audio
Language
Stop Slide Show /
Start Slide Show
Slide Show Speed
Background Music
Zoom
Rotate
Information
_ra
You canselect another video file to pby directly. "/
You can play movie and music files repeatedly. "/
You can adjust the picture size to your preference. "/
You can adjust the picture setting. ,,/ You can enhance motion in fast
moving scenes. "/ You can adjust the sound setting. ,,/ You can play the videowith
Subtitles. This function only works ifthe subtitles have the same file "/
name asthe video. You canselect the digital audio
output format. "/ You can change the audio
language if the video has more ,,/ than one language.
You canstart or stop a Slide Show.
You canselect the slide show speed during the slide show. You canset and select background music when watching aSlide Show.
You canzoom into images in full screen mode.
You can rotate images infull screen mode.
You cansee detailed information about the played file. "/
-,Z
,,4
-,Z ,,4
,,4
,,4
,,4
,,4
,,4
,,Z ,,4
Settings
Using the Setup Menu
[] DivX® Video On Demand :Shows the registration code
authorized for the TV. If you connect to the DNX web site and register with the 10-digit registration code, you can download the VOD activation file. Once you play it using Media Play, the registration is completed. '_' For more information on DivX® VOD, visit "http://vod.divx.
corn".
[] Information: Select to vies! information about the connected
USBdevice.
NOTE " Standard dimensions for wall mount kits are shown in the table
below.
" When purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
" Do not use screws that do not comply with the VESA standard
screw specifications.
" Do not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.
" For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ depending on the wall mount specifications.
" Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
" Samsung is not liable for product damage or personal injury
when a nomVESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
" Do not mount the TV at more than a 15 degree tilt. " Always have two people mount the TV on a wall.
19_22
26
LED-TV
32,40
75 X75
M4
100X 100
4
200 X 200 M6
46_60 400X 400 M8
Do not install your Wall Mount Kit whib
TVis turned It result in
your
on.
may
personal injury due to electric shock.
Securing the "iV to the Wall
Caution: Pulling, pushing, or Climbing onto _he TV may Cause the TV to fall. In particular, ensure that Your children do not
hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, asfollows.
To prevent the IV from failing '_, Since the necessary brackets, screws, and string or cable are
not supplied, please purchase these separately.
1. Insert the screws into the wall brackets and firmly fasten them to the wall. Make sure the screws arefirmly fixed to the wall.
'_' We strongly recommend you drive the screws into a stud.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information about installing the wall mount, see the instructions provided with the wall mount items. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others ifyou elect to install the wall mount on your own.
Wall Mount Kit Specifications 6/ESA) '_, The wall mount kit is not supplied, but sold separately. Installyour wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your nearest dealer. Ifyou install theTV on a ceiling or slanted wall, it mayfall and result insevere personal injury.
2. Using screws, insert the screws through the TV brackets, and then fasten the screws to the top VESA screw holes on the back of the T_
3. Connect the brackets on the TV and the brackets on the wall with a strong string or cable, and then tie the string or cable tightly to the brackets.
_' Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.
'_ Install the TV close to the wall so that it does not fall. '_' Connect the string or cable so that the brackets on the wall
are at the same height or lower than the brackets on the TV. Untie the string or cable before moving the TV.
'_' To purcase aTV Holder kit, contact Samsung customer care.
-11-
_ton Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. Refer to the manual provided with the Kensington Lock for additional information on proper use. '_' Please find a "i_" icon on the rear of the TV. The Kensington
slot is beside the "i_" icon.
'_' The position and color may differ depending on the model.
Dis la IVlodes HDMI/DVI In ut
Optimal resolution is 1920 x 1080@60Hz.
IBM
MAC
VESA DMT
640x 350 31469 70086 25176 720x 400 31469 70087 28322 640x 480 35000 66667 30240 / 832x 624 49726 74551 57284 /
1152x 870 68681 75062 100000 /
640x 480 31469 59940 26176 / 640x 480 37861 72809 31600 / 640x 480 37500 75000 31600 /
800x 600 37879 60317 40000 +/+ 800x 600 48077 72188 60000 +/+ 800x 600 46875 75000 49500 +/+ 1024x 768 48363 60004 65 000 / 1024x 768 56476 70069 75000 / 1024x 768 60023 76 029 78 750 +/+ 1152x 864 67500 76 000 108000 +/+ 1280x 720 45000 60000 74250 +/+ 1280x 800 49702 69 810 83500 /+ 1280x 1024 63981 60020 108000 +/+ 1280x 1024 79976 76025 135000 1366x 768 47712 69790 85500 1440x 900 55935 69 887 106500 /+
1600x 900RB 60000 60000 108000 +/+
1680x 1050 65290 69954 146250 /+ 1920x 1080 67600 60000 148500 +/+
Troubleshooting
Ifthe TV seems to have a problem, first review ttqis list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung.com, ttqen click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Flickering and Dimming
Component Connections / Screen Color
Ifyour Samsung Television is flickering or dimming sporadically, you may need to disable some ofits energy efficient features like theEnergy Saving feature. Follow the steps below with your remote to turn these features off or on.
Energy saving :Menu _ Setup _ Eco Solution _ Energy Saving _Select Settings
Ifyou find that the color on your Samsung television's screen isnot correct or black and white, first run a Self Diagnosis Test on theTV to make surethere are no device issues.
Self Diagnosis : User Menu _ Support _ Self Diagnosis _ Picture Test _.If the test is ok, try making sure ; _.Your connections areall consistent. For example, if you've used the AV Injack on your TV, make sure youhave
used theAV Out jack onyour video source. _.Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr,and Y, to connect your TV andvideo source, make sure you have connected the blue Pb jack on the
video source to the blue Pb jack on the TV,the redPr jack on the source to the red Prjack on the TV.
Screen Brightness Ifyou find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
you should check before calling for arepair. _.Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try
adjusting these options.
Unwanted Powering off
Trouble Powering On
Ifyour Samsung TV appears to turn off by itself,there may be an bsue with either your Timer settings or your Eco friendly No Signal Power Off feature. First makesure the Sleep Timer is not accidentally set. The Sleep Timer letsyou fall asleep with the TV still on knowing that it will turn off after acertain period of time and not waste energy. _.Sleep Timer : User Menu _ Setup _ Time _ Sleep Timer Ifthe Sleep Timer is notactivated, you may have engaged the No Signal Power Off orAuto Power Off feature. _.No Signal Power Off : User Menu _ Setup _ Eco Solution _ No Signal Power _,Auto Power Off : User Menu _ Setup _ Eco Solution _ Auto Power Off
Before you turn the TV on, find the red light on the right or left bottom of your TV.Press the power on button on the TV or remote and the light should blink about 5times before the TV turns on. Ifyou find that you are having trouble powering on your Samsung tebvision, there area number of things to check it before making a call to the service department. _.If you happen to be using the TV asa monitor and the stand-by light only blinks for a few seconds when you
pressthe power button, your PCis in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on. Ifyou're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you havea cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. Totest the signal output of your cable or satellite box, press the guide orinfo button on the cable or satellite box remote control. Ifthe screen displays the guide or info data, the problem iscaused bythe box.
-12-
Stand Assembly * If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide. Cannot find a channel * Re-run Plug &Play or run Auto Program. (go to MENU - Channel - Auto Program) Po0r Picture First, perform the picture Test and to see ifyour IV isdisplaying the test image properly.
Go to MENU _Support = Self Diagnosis-. Picture Test Ifthe test image is properly displayed, the poor picture may be caused by the source or signal.
The TVimage does not look as good as If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to itdid inthe store, deliverHD (high definition) picture quality.
Cabb/Satellite subscribers: Try HDchannels from the channel line up. Air/Cabb Antenna connection: Try HD channels after running Auto Program.
Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up scaled SD content islow.
Adjust the Cable/Set top box video output resolution to 1080i or720p.
The picture is distorted: macroblock * Compression of video contents may cause picture distortion, especially on fast moving pictures such asthose in error, small block, dots, pixelization, sports and action movies.
• A weak signal can cause picture distortion. This is nota TV problem.
• Mobile phones used close tothe TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Color is wrong or missing. * If you're using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness. * Adjust the Picture options in theTV menu. (goto Picture Mode / Color / Brightness / Sharpness)
• Adjust the Energy Saving option inthe TV menu. (go to MENU - Setup -Eco Solution - Energy Saving ) Tryresetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
There is adotted lineon the edge of * If the picture size is set to Screen Fit, change it to 16:9. the screen. * Change the cable/satellite box resolution.
The picture is black and white. * Ifyou are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1
onthe TV.
When changing channels, the picture * If connected to acable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It freezes or is distorted or delayed, maytake up to 20 minutes)
Setthe output resolution ofthe cable box to 1080i or 720p.
Sound Problems perform the S0und Test to confirm thatYOUr _ audio is properly olaerating,
(goto MENU _ Support : Self Diagnosis - Sound Test) ifthe audio is OK, thesound problem may be caused by the source or signal
There is nosound orthe sound is too * Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV. low at maximum volume.
The picture is good, but there is no * if youare using an external device, check the device's audio output option Ex.you may need to change your cable sound, box's audio option to HDMI if the box b connected to your TV using an HDMI cable.
Reboot the connected device by reconnecting the device's power cable.
The speakers are making an * Check the cable connections. Make sure a video cable is not connected to an audio input. inappropriate noise. * For Antenna or Cable connections, check the signal information. A weak signal maycause sound distortion.
Perform the Sound Test as explained above.
No Picturel No Video I The TVwill not turn on. • Make surethe AC power cord is securely plugged into the wall outlet and the TV.
Make surethe wall outlet isworking. Trypressing the POWER button on the TV to make sure the problem is not the remote.
Itthe IV turns on, reter to 'Remote control does not work' below.
The TVturns offautomatically. * Ensure the Sleep Timer is set to Off in the Time menu.
Ifyour PC is connected to the TV,check your PC power settings. Make surethe AC power cord is plugged securely into the wall outlet and the TV. When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15minutes ifthere is no signal.
There is no picture/video. Check the cable connections. (Remove and reconnect all cables connected to the TVand external devices).
Setyour external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if anexternal device's output is HDMI, it should be connected to an HDMI input on the TV. Make sureyour connected devices are powered on. Be sureto select the correct input source by pressing the SOURCE button on the remote control. Reboot the connected device by reconnecting the device's power cable.
RF(Cable/Antenna) Connection The TVis not receiving all channels. * Make sure the coaxial cable is connected securely.
RunAuto Program to add available channels to the channel list. goto MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set inthe menu. There are 3options. (STD, HRC and IRC) Verify the antenna is positioned correctly.
No Caption on digital channels. * Check the Caption Setup menu. Try changing Caption Mode Service 1 to CCl.
Some channels may not have caption data.
The picture is distorted: macroblock, * Compression of videocontents may cause picture distortion, especially on fast moving pictures such as those in error, small block, dots, pixelization, sports and action movies.
Aweak signal can cause picture distortion, This is not a TVproblem,
Others
Purpb/green rolling borizontal bars and * Remove the leftand right audio connections from the set4op-box. Ifthe buzzing stops, this indicates that the set- buzzing noise from the TV speakers with top-box has a grounding issue. Replace the Component video cables with an HDMI connection. Component cable connection.
The picture will not display in fullscreen. * HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
Black bars onthe top and bottom appear when movies that have aspect ratios different from your TV play on the TV.
Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work. * Replace the remote control's batteries. Make sure you insert them with the polarity (+/-) correct.
Clean thetransmission window located on the top of the remote control. Trypointing the remote directly at the TVfrom 5,_6feet away.
The cabb/set top box remote control * Program the Cabb/Set top box remote control to operate the TV. Refer to the Cabb/Set top box user manual for does not turn the TV on or off, oradjust the SAMSUNG TV code. the volume.
A "Mode Not Supported" message • Check the supported resolution of the TVand adjust the external device's output resolution accordingly. Refer to appears, resolution settings in this manual.
Caption on the TVmenu is greyed out. * You cannot select Caption inthe TV menu when watching content from a device connected via HDMI or
Component.
Caption must be activated onthe external device. There isa pbstic smell from the TV. • This smell is normal and will dissipate in afew days. %/Signal Strength is unavailable in the * This function is only available for digital channels received through an Antenna / RF/Coax connection.
Self Diagnosis Test menu. TVis tilted to the right or left side. * Remove the stand base from the TV and reassemble it. The Channel menu isgrey out * The Channel menu is only available when you select the TV source.
(unavailable). Your settings are lost after30 minutes or * IfTV is inthe Store Demo mode, it will reset audio and picture settings every 30 minutes, Please change from
everytime the TV isturned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select
TVmode, go to MENU _ Setup _ Plug & Play _ ENTER E:_. You have intermittent loss of audio or * Check the cable connections and reconnect them. video. * Loss ofaudio orvideo can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. You seesmall particles when you look * This ispart of the product's design and is nota defect.
closely st the edge of the frame of the TV.
POP (TV'sinternal banner ad) appears * Select Home Use under Plug &Play mode. For details, refer to Plug & Play (InitialSetup). on the screen.
'_' This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be afew bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. '_' Watch these troubleshooting on video at www.samsung.com/spsn. '_' Some functions and pictures shown in this manual are available on specific models only. '_' You can keep your TV in optimum condition byupgrading it with the latest firmware from the Samsung web site (samsung.com
Support -_ Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,
insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.
Storage and Maintenance
'_' If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching
the TV.
'_' The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using
asoft cloth to prevent scratches.
License
D° not spray water directly onto the _r_- tl product. Any liquid that goes into the product may Cause a failure, fire, or electric shock.
Clean the product with a Soft Cloth dampened with ina small amount of water. Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent,
TM
TheaterSound, SRS and the _ symbol are SRS TheaterSound provides the most immersNe
$I"5
trademarksofSRSLabs,,nc surroondsoondexper,enoefromtheTM'sbo,,t,n
Thea_erSound_ TheaterSound technology is incorporated under speakers, while maintaining steady volume and
license from SRS Labs, Inc. delivering rich bass and clear dialog,
_n _11_[,, DivX Certified® to play DNX® video up to HD 1080p, including premium content.
HD
ABOUT DIVXVIDEO: DNX@ is adigital video format created byDNX, LLC, asubsidiary of Rovi Corporation. This is an official DNX Certified® device that plays DivX video.Visit divx. corn for more information and software tools to convert your files into DivXvideos. ABOUT DIVXVIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DNXVideo-on- Demand (VOD) movies. Toobtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx. corn for more information on how to complete your registration. Covered by one or more of the following U.S. patents ;7,295,673; 7,460,668; 7,515,710; 7,519,274 DNX®, DivXCertified® and associated Iogos are trademarks of Rovi Corporation or its subsidiaries and are used under license,
[][] DOLBY
OlalTAL PLUS I
_ULSE1
Manufactured under license from Dolby Laboratories. Dolby and the doubb-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and
@_ worldwide patents issued & pending. DTS, the Symbol, & DTSand the Symbol together are registered
2.0Channel trademarks & DTS 2.0 Channel is atrademark of DTS, Inc. Product includes software. @ DTS, Inc. All Rights Reserved.
_ _ _ Theterms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
[]
registered trademarks of HDMI Licensing LLC in ttqeUnited States and other countries.
Open Source License Notice Open Source used inthis product can be found on the following webpage. (http://opensoume.samsung.com) Open Source License
Notice is written only English.
Tosend inquires and requests for questions regarding opensoumes, contact Samsung via Email (oss.mquest@samsung.com). [] This product uses some software programs which are distributed under the Independent JPEG Group. ICU License- ICU 1.8.1and later COPYRIGHTAND PERMISSION NOTICE Copyright (c)1995-2008 International Business Machineseorperation and others Allrights reserved. Permission ishereby granted, free ofcharge, to any personobtaining acopy of this software andassociated documentation files (the"Software"), to deal inthe Software
without restriction, including without limitation therights to use,copy, modify, merge, publish,distribute, and/or sellcopies of the Software, andto permit persons to whom the Software isfurnished to do so,provided thatthe above copyright notice(s) and thispermission notice appear inall copies of the Sofb¢,_areand that both the above copyright notice(s)and this permission notice appearin supperting documentatien. THE SOFTWAREIS PROVIDED"AS IS",WITHOUT WARRANTY OFANY KIND, EXPRESSOR IMPUED, INCLUDINGBUT NOT UMITED TO THEWARRANTIES OF MERCHANTABILITy,FITNESS FORA PARTICULARPURPOSE AND NONINFRINGEMENT OFTHIRD PARTYRIGHTS. INNO EVENT SHALLTHE COPYRIGHT HOLDER ORHOLDERS INCLUDED INTHIS NOTICE BELIABLE FORANY CLAIM, OR ANYSPECIAL INDIRECTOR CONSEQUENTIAL DAMAGES, ORANY DAMAGES WHATSOEVERRESULTING FROMLOSS OFUSE, DATAOR PROFITS,WHETHER INAN ACTIONOF CONTRACT, NEGLIGENCEOR OTHER TORTIOUS ACTION,ARISING OUT OF ORIN CONNECTIONWITH THE USEOR PERFORMANCE OFTHIS SOFTWARE.
Except ascontained inthis notice, the nameof a copyright holder shallnot be used inadvertising or otherwise to promote the sale,use or otherdealings inthis Software without priorwritten authorization of the copyright holder. Alltrademarks andregistered trademarks mentioned herein arethe property of their respectiveowners.
Environmental Considerations _ating Temperature
StorageTemperature Storage Humidity
50°F to 104°F (10°C to 40°C) 10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C ) 5% to 95%, non-condensing
1920x 1080
55" Class 60" Class 65" Class (Diagonal) (54.6" measured diagonally) (60.0" measured diagonally) (64.5" measured diagonally) Sound Output 10W x 2
Dimensions_ _ x Hx D)
49.2 X28.9 X 3.7 inches 54.1 X 22.2 X3.7 inches 58.4 X 34.4 X3.7 inches
(125g.6 X 735.7 X94.3 (ram)) (1375.6 X565.1 X 94.4 ((ram)) (1484.5 X873.8 X 96.3 (ram))
49.2 X31.0 X 8.9 inches 54.1 X 33.9 X 12.9 inches 58.4 X 36.4 X 12.9 inches
(1250.6 X 789.2 X 227.6 (ram)) (1375.6 X 862.5 X 329.7 ((ram)) (1484.5 X926.5 X 329.8 (ram))
Without Stand 38.8 Ibs (t 7.6 kg) 49.8 Ibs (22.6 kg) 63.0 Ibs (28.6 kg) With Stand 44.7 Ibs (20.3 kg) 59.0 Ibs (26.8 kg) 72.3 Ibs (32.8 kg)
'_, Design and specifications are subject to change without prior notice. '_, This device is a Class Bdigital apparatus. '_, For information about power supply, and more about power consumption, refer to the label attached to the
product. "_,Typical power consumption is measured according to Energy Star Program requirements for Televisions. '_, Dispose unwanted electronics through an approved recycler, To find the nearest recycling location, go to our
website: www.samsung,com/recyclingdirect orcall, (877) 278-0799.
[] JACK PANEL DETAIL / REAR VIEW
(Unit: inches)
UN55FH6003 16.7 15.7 15.7 6.1 7.5 36.4 12.6 UN60FH6003 19.1 15.7 15.7 8.6 9.2 38.8 14.9 UN65FH6001 21.3 15.7 15.7 10.7 9.5 41.0 17.2
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2013 Samsung Electronics America, Inc
-13- -14- -15- -16-
[UFH6003-ZA]BN68-05495A-00ENGindd 2 2013-07-29 BI]9:24:44
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use