Samsung UN55FH6200F, UN60FH6200F Schematic

LED TV

Chassis:U76A

Model

UN55FH6200F UN60FH6200F

SERVICE

LED TV Contents

1. Precautions

2. Product specications

3. Disassembly and Reassembly

4. Troubleshooting

5. Wiring Diagram

Manual

UN**FH6200F

Contents

1. Precautions ...................................................................................................................1-1

1-1. Safety Precautions ..............................................................................................................1-1

1-1-1. Warnings ...................................................................................................................1-1

1-1-2. Servicing the LED TV ...............................................................................................1-1

1-1-3. Fire and Shock Hazard .............................................................................................1-1

1-1-4. Product Safety Notices ............................................................................................. 1-2

1-2. Servicing Precautions ..........................................................................................................1-3

1-2-1. General Servicing Precautions ................................................................................. 1-3

1-3. Static Electricity Precautions ...............................................................................................1-4

1-4. Installation Precautions .......................................................................................................1-5

2. Product Specications.................................................................................................2-1

2-1. Product information .............................................................................................................2-1

2-2. Product specication ...........................................................................................................2-2

2-2-1. Detailed Specications .............................................................................................2-2

2-2-2. Feature & Specications ........................................................................................... 2-5

2-3. Accessories .........................................................................................................................2-8

2-4. Viewing the Functions ........................................................................................................2-9

2-4-1. Auto Motion Plus 120 Hz .......................................................................................... 2-9

2-4-2. Supported Formats .................................................................................................2-10

3. Disassembly and Reassembly ....................................................................................3-1

3-1. Disassembly and Reassembly ............................................................................................3-1

3-1-1. LED TV .....................................................................................................................3-1

4. Troubleshooting ...........................................................................................................4-1

4-1. Troubleshooting ...................................................................................................................4-1

4-1-1. Previous Check ........................................................................................................4-1

4-2. How to Check Fault Symptom .............................................................................................4-4

4-2-1. NO Power .................................................................................................................4-4

4-2-2. No Video (3-HDMI_Digital Signal) ............................................................................4-7

4-2-3. No Video (Tuner_CVBS) ........................................................................................4-10

4-2-4. No Video (Tuner_DTV) ...........................................................................................4-13

4-2-5. No Video (Video 2-AV) ............................................................................................4-16

4-2-6. No Video (Component) ...........................................................................................4-19

4-2-7. No Sound (1. Speaker, 2. Monitor_out, 3. Optical) ................................................. 4-22

4-3. Factory Mode Adjustments ................................................................................................4-25

4-3-1. Detail Factory Option ..............................................................................................4-25

4-3-2. Entering Factory Mode ...........................................................................................4-26

4-3-3. Factory Data ...........................................................................................................4-27

4-4. White Balance ...................................................................................................................4-35

4-4-1. Calibration ..............................................................................................................4-35

4-4-2. Service Adjustment ................................................................................................. 4-35

4-4-3. Adjustment .............................................................................................................. 4-36

4-5. RS-232C ............................................................................................................................4-37

4-6. AV Control Tabe .................................................................................................................4-38

4-7. Software Upgrade ..............................................................................................................4-44

4-7-1. How to Check the Software Version .......................................................................4-44

4-7-2. How to Upgade Software ........................................................................................ 4-45

5. Wiring Diagram .............................................................................................................5-1

5-1. Wiring Diagram ....................................................................................................................5-1

5-2. Connector ............................................................................................................................5-2

5-3. Connector Functions ...........................................................................................................5-4

1. Precautions

1-1. Safety Precautions

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock.

1-1-1. Warnings

For continued safety, do not attempt to modify the circuit board.

WARNING

1-1-2. Servicing the LED TV

When servicing the LED TV, Disconnect the AC line cord from the AC outlet.1.

It is essential that service technicians have an accurate voltage meter available at all times. Check the calibration of this 2. meter periodically.

1-1-3. Fire and Shock Hazard

Before returning the monitor to the user, perform the following safety checks:

Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the 1. chassis and other metal parts in the monitor.

Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and 2. compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.

Leakage Current Hot Check:3.

Disconnect the AC power and DC power jack before servicing.

(READING SHOULD)

DEVICE UNDER

TEST

ALSO TEST WITH PLUG REVERSED (USING AC ADAPTER PLUG AS REQUIRED)

NOT BE ABOVE 0.5mA

2-WIRE CORD

TEST ALL

EXPOSED METAL

SURFACES

LEAKAGE CURRENT

TESTER

EARTH

GROUND

Do not use an isolation transformer during this test.

Use a leakage current tester or a metering system that complies with American National Standards

WARNING

Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).

With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch rst 4.

in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit, etc.) and all exposed metal parts, including: metal cabinets, screwheads and control shafts. The current measured should not exceed 0.5 milliamp. Reverse the power-plug prongs in the AC outlet and repeat the test.

1-1

1-2

1. Precautions

1-1-4. Product Safety Notices

Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage,

wattage, etc. Parts that have special safety characteristics are identied by

replacement that does not have the same safety characteristics as the recommended replacement part might create

shock, re and/or other hazards. Product safety is under review continuously and new instructions are issued whenever

appropriate.

on schematics and parts lists. A substitute

1-3

1. Precautions

1-2. Servicing Precautions

An electrolytic capacitor installed with the wrong polarity might explode.

WARNING

Before servicing units covered by this service manual, read and follow the Safety Precautions section of

CAUTION

NOTE

1-2-1. General Servicing Precautions

Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before 1. attempting to: (a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test component in parallel with an electrolytic capacitor.

Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes used. 2. The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such elements to their original position.

After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that 3. the area around the serviced part has not been damaged.

Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input 4. terminals and earphone jacks).

Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. Connect 5. an insulation resistance meter (500 V) to theblades of the AC plug. The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be greater than 1 megohm.

Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; 6. always remove the instrument’s ground lead last.

this manual.

If unforeseen circumstances create conict between the following servicing precautions and any of the

safety precautions, always follow the safety precautions.

1-4

1. Precautions

1-3. Static Electricity Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly

called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some eld-effect

transistors. The following techniques will reduce the incidence of component damage caused by static electricity.

Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your 1. body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard, be sure to remove the wrist strap before applying power to the monitor.

After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent 2. accumulation of an electrostatic charge.

Do not use freon-propelled chemicals. These can generate electrical charges sufcient to damage ESDs.3.

Use only a grounded-tip soldering iron to solder or desolder ESDs.4.

Use only an anti-static solder removal device. Some solder removal devices not classied as “anti-static” can generate 5. electrical charges sufcient to damage ESDs.

Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs 6. are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive materials.

Immediately before removing the protective material from the leads of a replacement ESD, touch the protective material 7. to the chassis or circuit assembly into which the device will be installed.

Be sure no power is applied to the chassis or circuit and observe all other safety precautions.

CAUTION

Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, or 8.

lifting your foot from a carpeted oor can generate enough static electricity to damage an ESD.

1-5

1. Precautions

1-4. Installation Precautions

For safety reasons, more than a people are required for carrying the product.1.

Keep the power cord away from any heat emitting devices, as a melted covering may cause re or electric shock.2.

Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature 3.

may cause re.

Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed 4.

to moisture. Otherwise, it may cause a re or electric shock.

Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check 5.

the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause re or electric

shock.

Keep the antenna far away from any high-voltage cables and install it rmly. Contact with the highvoltage cable or the 6. antenna falling over may cause re or electric shock.

When installing the product, leave enough space (0.4m) between the product and the wall for ventilation purposes. 7.

A rise in temperature within the product may cause re.

2. Product Specications

2-1. Product information

Model UN**FH6200F

2. Product specications

Front View

Detail View

Front Color Black

Dimensions

55"

(W x H x D)

60"

55"

Weight

60"

Panel Type Super Clear

Set with Stand 1250.6 x 789.2 x 227.6 mm / 49.2 x 31.0 x 8.9 inches

Set without Stand 1250.6 x 735.7 x 94.3 mm / 49.2 x 28.9 x 3.7 inches

Set with Stand 1375.6 x 862.5 x 329.7 mm / 54.1 x 33.9 x 12.9 inches

Set without Stand 1375.6 x 799.3 x 94.4 mm / 54.1 x 31.4 x 3.7 inches

Set with Stand 23.2 kg / 51.1 lbs

Set without Stand 20.6 kg / 45.4 lbs

Set with Stand 23.0 kg / 50.7 lbs

Set without Stand 27.2 kg / 59.9 lbs

* W : Width H : High D : Depth

Internal Memory 2G

DDR 768MB

Feature SMART HUB / Full browsing / Media Play

2-1

2-2

2. Product specications

2-2. Product specication

2-2-1. Detailed Specications

NOTE

Design and specications are subject to change without prior notice.

Item UN**FH6200FXZC

General Information

Display

Audio

Smart Content

Product LED

Series 6

Country CANADA

Inch 55" / 60"

Resolution 1,920 X 1,080

Ultra Clear Panel No

Clear Motion Rate 240

Micro Dimming No

Digital Noise Filter Yes

Wide Color Enhancer Wide Color Enhancer Plus

3D Sound No

Sound Output (RMS) 10W x 2

Dolby Dolby Digital Plus / Dolby Pulse

SRS SRS TheaterSound HD

dts 2.0+Digital Out Yes

Speaker Type Down Firing + Full Range

Auto Volume Leveler Yes

Samsung SMART TV Yes

Smart Convenience

Family Story Yes

Fitness Yes

Kids Yes

Smart Hub Yes

Search All Yes

Your Video Yes

Social TV Yes

Samsung Apps Yes

Skype™ on Samsung TV Yes

Web Browser Yes

Recent History No

Personal Video Recorder Ready No

Time Shift Ready No

ConnectShare™ (USB2.0) Movie

2-3

2. Product specications

Item UN**FH6200FXZC

Smart Convenience

Smart Convergence

Smart Interaction

RUI No

RVU No

Smart Phone Remote supported Yes

Wirelss LAN Adapter Ready No

BD Wise Yes

Game Mode Yes

Anynet+ (HDMI-CEC) Yes

Picture-In-Picture Yes

Triple Protector N/A

OSD Language English, French, Spanish

Allshare (Powered by DLNA) Yes

AllShare Play Yes

Samsung SMART View No

WiFi Direct Yes

Camera Built-in No

Face recognition No

Motion control No

Smart Evolution

Tuner/Broadcasting

Connectivity

Voice Control (Embedded) No

Voice Control (Server) No

Camera App No

Samsung TV Apps supported No

Smart Evolution Ready No

3D No

3D Converter No

3D Sound No

DTV Tuner ATSC / Clear QAM

Analog Tuner Yes

MHP / MHEG (version)/ ACAP No

EPG No

Channel List USB-Clone N/A

CI+ N/A

Auto Channel Search Yes

Teletext (TTX) (1,000 pages) No

HDMI 2

USB 1

Headphone No

Wireless LAN Built-in Yes

Component In (Y/Pb/Pr) 1

2-4

2. Product specications

Item UN**FH6200FXZC

Connectivity

Design

Accessory

Composite In (AV) 1 (Common Use for Component Y)

Digital Audio Out (Optical) 1

PC In (D-sub) No

Scart N/A

RF In (Terrestrial / Cable input) 1

RF In (Satellite Input) No

PC Audio In (Mini Jack) No

DVI Audio In (Mini Jack) 1

Audio Out (Mini Jack) 1

Ethernet (LAN) 1

MHL No

Design One Desgin

Color Black

Bezel Type D2

Light Effect (Deco) No

Swivel (Left/Right) No

Stand Type Square

3D Active Glasses (Included) No

Samsung Smart Touch Control (Included) No

Samsung IR Blaster (Included) No

Wireless LAN Adaptor (Included) No

MoIP Camera No

Wireless Keyboard No

Remote Controller Model TM1240

Batteries (for Remote Control) Yes

Ultra Slim Wall Mount Supported No

Mini Wall Mount Supported Yes

Vesa Wall Mount Supported Yes

Slim Gender Cable No

Power Cable Yes

ANT-Cable No

User Manual Yes

E-Manual Yes

2-5

2. Product specications

2-2-2. Feature & Specications

Feature 

Digital-TV, RF, 2-HDMI, 1-Component,1-A/V(shared), 1-USB2.0(Media Play), LAN, Wi-Fi•

Contrast Ratio : Mega Contrast•

Dynamic contrast , Super-PVA•

PIP(in HDMI 1, 2, Component and Sub picture is available only in TV mode(DTV/ATV))•

Dolby Digital+, SRS theater, DVIX HD•

SMART HUB, Full Browser•

2-6

2. Product specications

Specications 

Model UN55FH6200F

Item Description

LCD Panel 55 inch FHD 120 Hz

Scanning Frequency Horizontal : 67.5 kHz

Vertical : 60 Hz

Display Colors 1.07B

Maximum resolution Horizontal : 1920 Pixels

Vertical : 1080 Pixels

Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock rate 148.5 MHz

Active Display (H x V)*

* Horizontal x Vertical

AC Power Voltage & Frequency AC110-120V 60Hz

Environmental Considerations Operating Temperature: 50˚F ~ 104˚F (10˚C ~ 40˚C)

Audio Spec. MAX Internal Audio Output Power : Each 3W (Left/Right)

Note : AllShare, 3D, USB 2.0, Energy Saving, ECO Sensor

1209.6 (H) x 680.4 (V) mm

Operating Humidity: 10% ~ 80%

Storage Temperature: -4˚F ~ 113˚F (-20˚C ~ 45˚C)

Storage Humidity: 5% ~ 95%

Equalizer : 5Band

Output Frequency : RF : 20 Hz ~ 15.4 kHz

AV/Componet/HDMI : 20 Hz ~ 20 kHz

2-7

2. Product specications

Model UN60FH6200F

Item Description

LCD Panel 60 inch FHD 120 Hz

Scanning Frequency Horizontal : 67.5 kHz

Vertical : 60 Hz

Display Colors 1.07B

Maximum resolution Horizontal : 1920 Pixels

Vertical : 1080 Pixels

Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock rate 148.5 MHz

Active Display (H x V)*

* Horizontal x Vertical

AC Power Voltage & Frequency AC110-120V 60Hz

Environmental Considerations Operating Temperature: 50˚F ~ 104˚F (10˚C ~ 40˚C)

Audio Spec. MAX Internal Audio Output Power : Each 3W (Left/Right)

Note : AllShare, 3D, USB 2.0, Energy Saving, ECO Sensor

1329.12 (H) x 747.63 (V) mm

Operating Humidity: 10% ~ 80%

Storage Temperature: -4˚F ~ 113˚F (-20˚C ~ 45˚C)

Storage Humidity: 5% ~ 95%

Equalizer : 5Band

Output Frequency : RF : 20 Hz ~ 15.4 kHz

AV/Componet/HDMI : 20 Hz ~ 20 kHz

2-8

2. Product specications

2-3. Accessories

NOTE

The items’ colors and shapes may vary depending on the model.•

Check that there is no accessory hidden behind packing materials when you open the box.•

The part code for some accessories may differ depending on your region.•

Product Code. No Product Code. No

Remote Control• AA59-00854A User Manual• BN68-05591B

Batteries (AAA x 2)• 4301-000121 Warranty Card• BN68-02021A

Power Cord• 3903-000599

Image Product Code. No

Holder-Wire Stand• BN61-05491A

2-9

2. Product specications

2-4. Viewing the Functions

2-4-1. Auto Motion Plus 120 Hz

Function Naming 

120 Hz FRC + MJC : Auto Motion Plus 120 Hz -

Detail Specications 

Function (OSD) 120 Hz FRC

Off

Clear

Standard

Smooth

Custom

Demo

(repeat)

(interpolation)

120Hz Motion Enhancement 

Off

Judder reduction (only 24p source)

Off Off

Off High

Medium Medium

High High

Level variable

(0~10)

Demo

(Standard / Off)

Blur reduction

Off Low / Mudium / High Demo

2-10

2. Product specications

2-4-2. Supported Formats

Supported Subtitle Formats 

Exterminal

Name File Extension

MPEG-4 Timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

Powerdivx .psb

Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

Supported Photos Formats 

File Extension Type Resolution

*.jpg

*.jpeg

*.bmp BMP 4096 x 4096

*.mpo MPO 15360 x 8640

* The MPO type le does not support Zoom, Rotate and Slide Show Effect functions.

JPEG 15360 x 8640

Supported Music Formats 

File Extension Type Codec Comments

*.mp3 MPEG MPEG1 Audio Layer 3

*.m4a

MPEG4 AAC*.mpa

*.aac

*.ac FLAC FLAC Supports up to 2 channel

*.ogg OGG Vorbis Supports up to 2 channel

WMA 10 Pro supports up to 5.1

*.wma WMA WMA

*.wav wav wav

*.mid

*.midi

midi midi type 0, type 1 are supported.

channel. WMA lossless audio is not supported. Supports up to M2 prole (except LBR mode)

2-11

2. Product specications

Supported Video Formats 

File

Extension

*.avi

*.mkv

*.asf

*.wmv *.mp4

*.3gp

*.vro

*.mpg

*.mpeg

*.ts *.tp

*.trp

*.mov

*.v

*.vob

*.svi

*.m2ts

*.mts

*.divx

*.webm WebM VP8 1920 x1080 20 Vorbis

Container Video Codec Resolution

Divx 3.11 / 4 / 5 / 6

1920 x

1080

1280 x 720

1920x1080

640 x 480

AVI

MKV

ASF

MP4

3GP

MOV

FLV

VRO VOB

PS TS

SVAF

MPEG4 SP/ASP

H.264 BP/MP/HP

Motion JPEG 640 x 480

Microsoft MPEG-4 v3

Window Media Video

v7,v8

Window Media Video v9

MPEG2

MPEG1

MVC

VP6 6~30 4

Frame rate

(fps)

6~30

24/25/30 60

Bit rate

(Mbps)

Audio Codec

AC3

LPCM

ADPCM(IMA,

MS)

AAC

HE-AAC

WMA

DD+

MPEG(MP3)

G.711(A-Law,

μ-Law)

Other Restrictions 

Video content will not play, or not play correctly, if there is an •

Video Decorders 

Supports up to H.264, Level 4.1 (does not support FMO/ASO/RS)•

VC1 AP L4 is not supported.•

All video codecs excluding WMV v7, v8, MSMPEG4 v3, MVC, and VP6:•

Below 1280 x 720: 60 frame max -

Above 1280 x 720: 30 frame max -

GMC is not supported.•

Supports SVAF top/bottom and left/right only.•

Supports Blu-ray/DVD MVC specs only.•

Audio Decorders 

WMA 10 Pro supports up to 5.1 channels. Supports up to M2 prole. (Excluding M0 LBR mode)•

WMA lossless audio is not supported.•

Vorbis is supported for up to 2 channels.•

DD+ is supported for up to 5.1 channels.•

3. Disassembly and Reassemble

3. Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the LED TV.

This LED TV contains electrostatically sensitive devices. Use caution when handling these components.

WARNING

3-1. Disassembly and Reassembly

Disconnect the LED TV from the power source before disassembly.1.

Follow these directions carefully; never use metal instruments to pry apart the cabinet.2.

CAUTION

3-1-1. LED TV

Place TV face down on cushioned table.

If there is no additional coment, it is same for all inches.3.

Description Picture Description Screws

Remove 4 screws from the ASSY

GUIDE P-STAND.

Remove STAND.

6003-001782

SCREW-MACHINE

M4.0, L12.0 BLK

3-1

3-2

3. Disassembly and Reassemble

Description Picture Description Screws

Remove screws of ASSY COVER

P-MIDDLE, REAR.

55 inch : 13 EA•

60 inch : 17 EA •

55 inch : 14 EA•

60 inch : 12 EA•

6003-001782

SCREW-MACHINE

M4.0, L12.0 BLK

6001-002755

SCREW-MACHINE

M3.0, L6.0 BLK

Remove the ASSY COVER P-MIDDLE,

REAR.

Remove the Power Cables and Speaker

Cables.

Remove the LVDS Cable and Panel Drive Cable.

Power Cable

Speaker Cable

Power Cable

LVDS Cable

Panel Drive Cable

LVDS Cable

3-3

3. Disassembly and Reassemble

Description Picture Description Screws

Remove the screws of ASSY PCB

MAIN.

Remove the screws of DC VSS-LED TV

PD BD.

6001-002756

SCREW-MACHINE

M3.0, L6.0 WHT

6001-002756

SCREW-MACHINE

M3.0, L6.0 WHT

Remove the ASSY COVER-REAR.

Remove the ASSY SPEAKER (L/R).

Remove the 4 screws of Stand Link.

6001-002757

SCREW-MACHINE

M3.0, L6.0 WHT

3-4

3. Disassembly and Reassemble

Description Picture Description Screws

Remove the 4 screws of T-con.

Unlock the locking of T-con cable.

6001-002757

SCREW-MACHINE

M3.0, L6.0 WHT

Completed disassembly.

Reassembly procedures are in the reverse order of disassembly procedures.

Panel.•

Front.•

NOTE

+ 51 hidden pages