Samsung UN60F7500AF, UN55F7500AF, UN46F7500AF User Manual

QUICK START GUIDE

Welcome to your new Smart TV!

The following instructions cover assembling, connecting, and setting up your new TV. Make sure you have the accessories listed below.

Included in this box

BN68-05035A-01

Remote Control

Stand Parts and Cables

x 4

Attach the TV to

Connect video

Insert the

Power on and

Smart Touch Control

Wall mount adapter

Cable manager

Stand Mount

batteries into the

start the initial

the Stand

devices

remote control

setup

Step

1

Step

2

Step

3

Step

4

Batteries (AAA x 2)

Power cord

IR extender

RCA Adapter

Warning: Screens can be damaged

from direct pressure when handled

Also included: User Manual, Regulatory Guide, 3D Active Glasses

incorrectly. We recommend lifting the

TV by the edges, as shown.

Step 1	Attach the TV to the Stand
1	Lay the TV on a soft surface, screen side down.	4	Insert 4 screws and secure the stand to the
	Use the packing material to protect the screen.		mount.
			x4 (M4 X L12)	40” ~ 55”
			x4 (M4 X L10)	60”

	REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV	5	Holding the stand parallel to the screen, slide
	(such as the box).
			the stand into the notches on the back of the
			TV.

2	Put a base and screws off to assemble the stand
	out of the box.

	x 8
Base	Screws

1

2

3

3	Fit the stand and mount together, making sure	6	Insert 4 screws and secure the stand to the TV.
	the notch on the mount aligns with the stand.		x4 (M4 X L12)	40” ~ 55”
			x4 (M4 X L10)	60”

Step 2 Connect video devices

We suggest using HDMI connections whenever possible for the best picture quality. Use the included AV adapter to connect older devices. The displayed image may differ depending on the model.

You can connect home theater systems to the OPTICAL or AUDIO OUT ports.

USB Connections

You can connect USB storage devices to the USB jacks and enjoy personal photos, videos, and music.

Best Connection : HDMI

We suggest using HDMI whenever possible.

HDMI 1 is the default port for a cable or satellite settop box.

Use the other ports for Bluray players, game consoles, and other devices.

Power Input

		Good Connection : Component and AV
	HDMI Cable	Match the colors on your device's cables to the
		colors on the jacks. Connect the yellow composite
		video out connector from an AV device to the yellow
		AV IN jack.
		EX-LINK
	HDMI Port	Component
		AV

Wired Ethernet

Connect the cable from the antenna or cable TV outlet.

The AUDIO OUT port can connect to a speaker.

Step 3 Insert the batteries into the remote control

To open, put your plastic card into the notch.

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.

Cable Plugs

Ports / Jacks

HDMI

USB

Optical

Do not plug cables in upside down.

Be sure to check the orientation of Warning the plug before plugging it in.

Step 4 Power on and start the initial setup

Information required:

•Wi-Fi network password (if you use one)

•Zip code

•Cable or satellite provider info

The TV must be connected to the Internet to use the Smart Features. If you have a wireless network, we recommend that you confirm that your network router is switched on and working before you start the initial setup. If you have a wired network, we recommend that you connect the TV to the network with a CAT 7 cable before you begin.

Power on to start the initial setup.

Connect to your network (wired or wireless)	Search for channels from
	your TV service provider
or

After you have finished the initial setup, you can configure the universal remote control settings. These settings let the Smart Touch remote control external devices connected to the TV, such as a set-top box or Blu-ray player.

Congratulations on your new Smart TV!

Troubleshooting

The stand is wobbly or crooked

Make sure the arrows on the stand are properly aligned.

The TV won’t turn on

Make sure all cables are fully inserted, and that the remote has batteries installed.

My remote, gesture, or voice controls don't work

The TV ships with protective stickers covering some of the sensors. Make sure all of them have been removed.

I don’t know where to plug in <device>

Devices without HDMI may require the included A/V adapter.

I have extra parts

The TV includes some optional parts to help with wall mounting and cable routing.

If you experience issues, please do not take the TV back to the store.

In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www. samsung.com/spsn for support and warranty service.

For other countries, refer to "Contact SAMSUNG WORLDWIDE" in the user guide.