Samsung 6400, UN40F6400, UN46F6400, UN50F6400, UN55F6400 User Manual
...
LED TV
user manual
✎ If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________ Serial No. _____________
Important Safety Instructions
Warning! Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
Ř The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
− Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
− Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
− Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
Ř Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
Ř This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries
properly. Please contact your local authorities for disposal or recycling information.
Ř Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
Ř Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at the plug end, at wall outlets, and the point where they exit from the appliance.
Ř To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
Ř Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the
local electrical supply.
Ř Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
Ř To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
Ř Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.
Ř If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately
and contact an authorized dealer or service center.
Ř Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time
(especially when children, elderly or disabled people will be left alone in the house).
− Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or
the insulation to deteriorate.
Ř Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust, high or low
temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such in an airport, a train station, etc. Failing to
do so may lead to serious damage of your TV.
Ř Use only a properly grounded plug and wall outlet.
− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
Ř To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be
readily accessible at all times.
Ř Do not allow children to hang onto the product.
Ř Store the accessories (battery, etc.) in a location safely out of the reach of children.
Ř Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
Ř Do not drop or apply any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
Ř To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals
such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance
of the TV or erase the printing on the product.
Ř Do not expose this apparatus to dripping or splashing.
Ř Do not dispose of batteries in fire.
Ř Do not short-circuit, disassemble or overheat the batteries.
Ř There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace
only with the same or equivalent type.
Ř WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
English - 2
Contents
s
o
Basic Features
5 Using the Smart Touch Control
6 Connecting to the TV
6 Inserting the Batteries (AAA X 2)
7 Low Battery Power Warning
7 Using the touch pad
7 Changing Channels by Entering Numbers
8 Show Status and Notification Banner
8 Recommended
8 History
8 Searching
9 Using the Virtual Remote Panel
10 Turning on the TV
11 Switching Between Video Sources
12 Universal Remote Setup
12 Add the External Device
3D Basic
17 3D Active Glasses
17 Pairing 3D Active Glasses
19 Watching 3D Video
Troubles
Informati
20 What is Remote Support?
21 Troubleshooting
22 Mounting the TV on the Wall Using
the Wall Mount Kit (Optional)
24 Assembling the Cable manager
24 Eco Sensor and Screen Brightness
25 Maintenance
ooting and Other
n
Viewing the e-
13 Viewing the e-Manual
13 Scrolling a Page
13 Using the Top Icons
13 Returning to the Home Page
13 Searching the Index
14 Searching Pages
14 Closing the e-Manual
14 Jumping to a Menu Item
14 Updating the e-Manual
Network Config
15 Connecting to a Network
15 Network Connection - Wireless
15 Wireless Network Precautions
15 Network Security Protocols
16 Network Connection - Wired
anual
ratio
25 Providing Proper Ventilation for Your TV
26 Securing the TV to the Wall
Specifications
27 Specifications
29 Dimensions
29 Licenses
Guides
30 Warranty Information
32 Regulatory Compliance Statements
(For 3D Active Glasses)
33 SAMSUNG BRAND PRODUCTS
33 LIMITED WARRANTY TO
ORIGINAL PURCHASER
English - 3
Figures and illustrations in this User Manual are provided for reference only and may differ from the actual
product appearance. Product design and specifications may change without notice.
Features of your new TV
Ř 3D: This new feature enables you to view 3D content.
Ř SMART HUB:
This TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you
can surf the web, download applications, and stay in touch with family and friends through social
networking services. In addition, you can view or play photo, video, and music files stored on external
storage devices.
Press the
the screen.
Smart Hub services and functionality include:
Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and
Twitter. You can also make video calls to friends by connecting the TV to a camera (sold separately).
Apps: Samsung Apps offers an extensive collection of free and paid news, sports, weather, and
gaming content you can directly download to and enjoy on your TV.
On TV: Check a listing of programs that are currently airing or are scheduled to air.
Movies & TV Shows: Purchase and watch movies and series without a separate external device.
Photos, Videos & Music: Play back photo, video, and music files from an external storage device.
™ button to launch Smart Hub. Choose a service using the icons displayed in the top part of
Ř Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support
Anynet+ with your Samsung TV’s remote.
Ř e-Manual: Provides a detailed, on-screen user's manual built into your TV.
Ř SMART Interaction: Using this function, you can access and control menu options and functions
using motions. To use the Smart Interaction Feature, connect the SMART TV camera (sold separately)
to your TV.
Ř Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.
Ř Screen Mirroring: Displays mobile device screens on your TV using a wireless connection.
English - 4
Using the Smart Touch Control
MUTE
Use Voice Recognition function with
the microphone embedded in remote
The Voice Recognition function
✎
can be affected by unclear
pronunciation, voice level, or
surrounding noise.
Turns the TV on and off.
Displays and selects the available video
control.
sources.
TV
MIC
SOURCE
STB
Turn on and off the satellite or cable
set-top box connected to the TV.
For this, the Smart Touch Control must
be configured as a universal remote
control. See the e-Manual chapter,
Controlling the TV > Universal
Remote Setup.
VOICE: Take your voice command and
enter a text using your voice.
MUTE: Cuts
off the sound
temporarily.
Adjusts the volume.
LIGHT: Turn on the backlight for the
buttons. The backlight lasts for only a
few seconds. Turns the remote control
light on or off. When on, the buttons
become illuminated for a moment when
pressed. (Using the remote control with
this button set to On will reduce the
battery usage time.)
DVR: Displays the STB EPG
(Electronic Program Guide).
MENU: Opens the OSD.
3D: Turns the 3D function on or off.
See e-Manual chapter,
TV Viewing > 3D TV.
Returns to the previous menu.
VOL
LIGHT DVR MENU 3D
EXIT
VOICE
MORE
SMART HUB
CH
GUIDERETURN
Changes channels.
Displays a virtual remote panel on the
screen. See the e-Manual chapter,
Controlling the TV > Using the Virtual
Remote Control.
Touch Pad
Ř Drag on the touch pad to move the
focus on the screen.
Ř Press the touch pad to run,
activate, or select the highlighted
item.
Ř Press and hold the touch pad to
display the Channel List.
Displays the EPG
(Electronic Program Guide).
Brings up Smart Hub applications.
See the e-Manual chapter, SMART TV
Features > Smart Hub.
To exit an application that is
✎
running easily, press the
™
button.
English - 5
Connecting to the TV
In order to operate the TV using a Smart Touch Control, you must fi rst pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press the
P button. The remote control receiver's location may vary depending on the model.
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt
to connect to the Smart Touch Control automatically.
<Attempting to connect and completion icons>
Inserting the Batteries (AAA X 2)
1
2
3
1. Slightly lift the battery cover by pulling the strap or using a plastic card (e.g. a credit card). Next, pull on
the cover’s notch with a fi ngernail to remove the cover completely.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control, and then press down along the edges until
it is completely attached to the remote control.
Reconnecting the Smart Touch Control
If you need to reestablish the connection between the TV and the Smart Touch Control, press the pairing
button at the back of the Smart Touch Control, pointing at the remote control sensor of the TV.
The pairing button can be accessed by removing the Smart Touch Control's battery cover. Pressing the
pairing button automatically reestablishes the connection between the Smart Touch Control and the TV.
<The Smart Touch Control's pairing button>
English - 6
Low Battery Power Warning
If the battery becomes low while using the Smart Touch Control, the following
alarm window appears at the bottom of the left screen. If the alarm window
pops up, replace the batteries of the Smart Touch Control. Use alkaline
batteries for longer usage.
<Low battery alarm window>
Using the touch pad
Use the touch pad to implement various commands. Navigate to Tutorial (System > Device Manager >
Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.
Dragging Pressing
Drag on the touch pad to move the focus, pointer, or highlight in the
direction the finger is dragging.
Press the touch pad to select the item highlighted or in focus.
When watching TV, press and hold the touch pad for 2 seconds displays
the channel list. On some apps, press and hold the touch pad for 2
seconds displays a list of functions available for the app.
Changing Channels by Entering Numbers
While watching TV, tap on the protruding line on the left or right edge of
the touchpad to bring up the numerical input window on the screen. Use
your finger to enter the number for the channel you want to watch. The
recognized number is displayed on the screen and the TV switches to
the corresponding channel. However, the number you have entered may
not be recognized properly by the TV. Refer to the guide below to ensure
that your numerical entries are recognized accurately.
English - 7
Numerical Input Guide
Refer to the diagrams below when entering numerical values. The TV may not recognize your entries if you
do not follow the sequences shown below.
Show Status and Notification Banner
Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel
that appears on the screen. The status and notification banner appears at the top of the screen. For more
information about using the status and notification banner, refer to e-Manual > SMART TV Features >
Status and Notification.
Recommended
Press the RECOMM. / SEARCH button and then select the Recommended from the list on bottom of the
screen. This shows the current/scheduled program and application recommendations.
Select a program that is currently airing to jump to the corresponding channel or a program that is
scheduled to air to set up a Schedule Viewing setting. Refer to e-Manual > SMART TV Features > On TV
for more information.
Select an application to launch. Samsung Apps will launch if the selected application is not installed on the
TV. Refer to e-Manual > SMART TV Features > Apps > Samsung Apps for more information.
History
Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of
the screen. This displays an interactive list of recently accessed channels, media content and applications.
Searching
Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears at the bottom of the
screen. Press the RECOMM. / SEARCH button again. The keypad will appear on the screen. Enter search
criteria to search not only many apps and their contents on the TV but also the Web.
Refer to e-Manual > SMART TV Features > Searching for more information.
English - 8
Using the Virtual Remote Panel
Press the MORE button to display the virtual remote panel on the TV screen. The virtual remote panel
consists of the number panel, a playback control panel, and the quick access panel. Use the touch pad to
highlight and select icons, numbers, and buttons on the panels.
The displayed virtual remote panel on the TV screen may differ depending on the country.
✎
Channel History
No Channel numbers
have been saved.
D
TOOLS
E F G
STATUS MENU3D
INFO
Netflix Amazon
STATUS
TOOLS
Ext. SpeakerP.Size CC
Web Brow...
P.Mode
MTS e-Manual
PIP
B
Changing the Virtual Remote Panel
You can change which virtual remote panel is displayed on the TV screen. To shift between panels, move
the focus highlight beyond the left or right edge of the displayed panel.
Use left/right scroll function on the touch pad to change the panel easily.
Change a position of the Virtual Remote Panel
Press the MORE button on the Smart Touch Control. The virtual remote panel appears on the screen.
Press and hold the touch pad for one second. Users can change a position of the virtual remote panel of
the screen.
Using the Number Panel
Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while
watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to
previous channels.
Using the Playback Control Panel
Use the playback control panel to pause, rewind, fast forward, skip to the next file, select a function with
the a, b, {, } button, and much more while enjoying media content.
Using the Quick Access Panel
Use the buttons on the quick access panel to bring up the TV's INFO, TOOLS, or e-Manual screens. Note
that the buttons that appear may vary depending on the operating mode of the Smart Touch Control (with
the TV only, as a universal remote, etc.).
English - 9
Turning on the TV
Turn on the TV using the P button on the Smart Touch Control or TV panel.
The product color and shape may vary depending on the model.
✎
The first time you turn on your TV, it will immediately start the initial setup.
✎
The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV
✎
without the remote control.
Open Smart Hub.
Open the menu.
mR
Select a source.
P
Turn off the TV.
TV Controller
The control stick is located at the
lower-left corner on the back of the TV.
Remote control sensor
TV
MIC
STB
SOURCE
VO
L
VOIC
E
CH
MORE
LIGH
T
DVR
RETURN
MENU
EXI
T
3D
SMART
HU
B
GUID
E
When you use the Smart Touch
Control, the standby LED does not
respond, except when you press
P
button.
the
Caution of the cover-jack (32 - 50 inches models only)
CAUTION
The cover-jack is for use by qualified service personnel only.
To reduce the risk of electric shock or fire hazard, do not use the cover jack, unless you are qualified to do
so.
TV Rear Panel
Cover-jack
The rear panel may differ depending on the model.
✎
English - 10
Switching Between Video Sources
Press the SOURCE button to switch between devices connected to the TV.
For example, to switch to a game console connected to the second HDMI connector, press the
button. From the Source list, select HDMI2. The connector names may vary depending on the product.
Select Tools at the upper-right corner of the source screen to access the following functions.
Ř Edit Name: Lets you associate a device name to an input source.
You can select the following device names in the Edit Name option:
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI
PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA
To associate a device name to an input source follow these steps:
1. Select Tools in the upper right corner of the source screen.
2. Select Edit Name.
3. Find the input source you want in the Source list (HDMI1, HDMI2, Component, etc.).
4. Select the blank field next to the input.
5. In the device name list that appears, select the name of the device attached to the input.
When you view the Source list, the device name and the input jack will be displayed together.
SOURCE
− If you have connected a PC to the
device name list.
− If you have connected a PC to the
from the device name list.
− If you connected an AV device to the
Devices from the device name list.
Ř Information: View detailed information about the connected devices.
Ř Refresh: Select if a connected device does not appear in the list. If the list does not show the device
after selecting Refresh, check the status of the TV-to-device connection.
Ř Remove USB: Remove the USB device from the list safely. This function is only available when the
USB device selected.
Universal Remote Setup: Use to configure universal remote control settings. Using the universal remote
control, you can control external devices connected to the TV, such as a set-top box, Blu-ray player, and
AV receiver.
HDMI IN 4 (DVI) port with an HDMI cable, select PC from the
HDMI IN 4 (DVI) port with an HDMI to DVI cable, select DVI PC
HDMI IN 4 (DVI) port with an HDMI to DVI cable, select DVI
English - 11
Universal Remote Setup
This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home
theaters, and other third-party external devices connected to the TV using the TV's remote control.
2 inches
Keep a distance of 2 inches at least between the IR Extender and the external device, as the illustration
shows. Face the IR Extender toward the external device’s remote control signal receiver. Note that it should
be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with
the transmission of the remote control signal.
Add the External Device
1. Turn on the external device you wish to set up universal remote function for and then press the
SOURCE to bring up the Source screen.
2. Select Universal Remote Setup from the top of the screen. This initiates the universal remote setup
process.
3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the
remote control by entering the model number manually.
English - 12
Viewing the e-Manual
This TV has a built-in e-Manual that contains information about your TV's key features and instructions for
using them. To view the e-Manual, use one of the following methods:
Ř Open the Support menu and choose e-Manual (Troubleshooting).
Ř Press the
screen. Flick the touch pad until the quick access panel appears, select the e-Manual icon, and then
press the touch pad.
In the e-Manual, words in blue refer to screen menu options and words in light blue refer to remote
✎
control buttons.
A printable version of this guide is also available at www.samsung.com/support.
✎
MORE button on the Smart Touch Control to display the virtual remote panel on the TV
Scrolling a Page
To scroll a page, use of one of the following methods:
Ř Place the focus on the
Ř Drag or flick up or down from the line on either the left or right edge of the touch pad.
Ř Place the focus on the
touch pad.
or button at the right edge of the screen, and then press the touch pad.
or button at the right edge of the screen, drag or flick up or down on the
Using the Top Icons
Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through
pages. These icons are available after you have viewed two or more pages.
Returning to the Home Page
To return to the home page, select the a button or select on the top right of the screen.
To select a letter button (a, b, {, }), press the MORE button on the Smart Touch Control to
✎
display the virtual remote panel on the TV screen. Flick the touch pad until the playback control panel
appears, select the
a button, and then press the touch pad.
Searching the Index
Select the b button or select on the top right of the screen to display the index. Select a term to
display the page containing the term.
English - 13
Searching Pages
Select the { button or select on the top right of the screen, and enter search criteria. Select a page
from the list of search results to display it.
Closing the e-Manual
To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the
screen.
Jumping to a Menu Item
To jump directly to the menu item that is described in the current section, select . It is possible to
jump from a menu item directly to the related section in the e-Manual. On a menu screen, press the MORE
button on the Smart Touch Control and then select e-Manual on the virtual remote panel that appears on
the screen.
This feature may not be available, depending on the menu.
✎
Picture
Picture Mode
۷ Backlight
۷ Contrast
۷ Brightness
۷ Sharpness
۷ Color
۷ Tint (G/R)
G50
Standard
R50
100
14
45
50
50
e-Manual
Try Now
Updating the e-Manual
Press the ™ button and select Apps, and then select More Apps. The e-Manual can be updated in the
same way with an application update.
On the More Apps screen, select Update Apps, and then select e-Manual from the list. The e-Manual
starts updating to the latest version. However, Update Apps appears on the screen only when the update
is required.
English - 14
Loading...