Samsung UN55F6800AF, UN46F6800AF User Manual

Attach the TV to the Stand
Step
Welcome to your new Smart TV!
QUICK START
The following instructions cover assembling, connecting, and setting up your new TV. Make sure you have the accessories listed below.
GUIDE
BN68-05032A-01
Connect video devices
1
Step
2
Insert the batteries into the remote control
Step
3
Power on and start the initial setup
Step
4
Included in this box
Remote Control Stand Parts and Cables
Smart Touch Control Power cord IR extender Stand Cover
Batteries (AAA x 2)
x 2
Cable manager
Wall mount adapter
46 - 50 inches models: 2 pieces
55 inches model: 4 pieces
x 2
Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV by the edges, as shown.
Step 1 Attach the TV to the Stand
Lay the TV on a soft surface, screen side down. Use the packing material to protect the screen.
1
Also included: Cleaning cloth, user manual, regulatory guide, 3D Active Glasses
Place the stand covers on the stands and press them until they click in place.
5
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV (such as the box).
Put a leg and screws off to assemble the stand out of the box.
2
x 2
Leg
3
x 4
Screws
Insert the stands into the grooves on both sides on the bottom of the TV’s back.
To detach the stand covers from the TV, use a flat screwdriver. Insert a flat screwdriver into the gap at the bottom of the stand covers, and pull it up until
they separate.
[ Be careful not to scratch the stand with the screwdriver.
Put up the TV with assistance from a person after attaching the stands to the TV.
6
4
x4 (M4 X L12)
Insert 4 screws and secure the stand to the TV.
AIR/CABLE
Connect the IR extender to the IR Out port
to control external devices connected to
the TV using the Smart Touch Control. For
more detailed information, refer to the
"Universal Remote Control Setup" section
on the User manual.
Step 2 Connect video devices
We suggest using HDMI connections whenever possible for the best picture quality.
The displayed image may differ depending on the model.
USB Connections
You can connect USB storage devices
to the USB jacks and enjoy personal photos, videos, and music.
Best Connection : HDMI
We suggest using HDMI whenever possible.
HDMI 1 is the default port for a cable
HDMI Cable
HDMI Port
or satellite set-top box.
Use the other ports for Blu-ray players, game consoles, and other devices.
Connect the IR extender to the IR Out port to control external devices connected to the TV using the Smart Touch Control. For more detailed information, refer to the "Universal Remote Control Setup" section on the User manual.
USB (5V 0.5A)
USB
(HDD 5V 1A)
USB
(TV CAMERA)
HDMI IN 3
HDMI IN 2
(ARC)
HDMI IN 1
(STB)
ANT IN
AIR/CABLE
HDMI IN 4
(DVI)
IR OUT
AUDIO OUT
Power Input
Wired Ethernet
COMPONENT
/ AV IN
LAN
VIDEO
AUDIO
DIGITAL
AUDIO OUT
(OPTICAL)
EX-LINK
You can connect home theater systems to the OPTICAL or AUDIO OUT ports.
Good Connection : Component and AV
Match the colors on your device's cables to the colors on the jacks. Connect the yellow composite video out connector from an AV device to the green AV IN jack.
AV also accepts component video connections (red/green/blue).
+
Connect the cable from the antenna or cable TV outlet.
Step 3 Insert the batteries into the remote control
To open, put your plastic card into the notch.
Step 4 Power on and start the initial setup
The AUDIO OUT port can connect to a speaker.
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.
HDMI
USB
Optical
Troubleshooting
Cable Plugs Ports / Jacks
Warning
Do not plug cables in upside down. Be sure to check the orientation of the plug before plugging it in.
Information required:
Wi-Fi network password (if you use one)
Zip code
Cable or satellite provider info
The TV must be connected to the Internet to use the Smart Features. If you have a wireless network, we recommend that you confirm that your network router is switched on and working before you start the initial setup. If you have a wired network, we recommend that you connect the TV to the network with a CAT 7 cable before you begin.
Power on to start the initial setup.
Connect to your network (wired or wireless)
Search for channels from your TV service provider
or
After you have finished the initial setup, you can configure the universal remote control settings. These settings let the Smart Touch remote control external devices connected to the TV, such as a set-top box or Blu-ray player.
The stand is wobbly or crooked
Make sure the arrows on the stand are properly aligned.
The TV won’t turn on
Make sure all cables are fully inserted, and that the remote has batteries installed.
My remote, gesture, or voice controls don't work
The TV ships with protective stickers covering some of the sensors. Make sure all of them have been removed.
I have extra parts
The TV includes some optional parts to help with wall mounting and cable routing.
If you experience issues, please do not take the TV back to the store.
\
In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www. samsung.com/spsn for support and warranty service.
For other countries, refer to "Contact SAMSUNG WORLDWIDE" in the user guide.
Congratulations on your new Smart TV!