Samsung UN48H4005AFXZA-TS01, UN48H4005AFXZA-US02, UN40H4005AFXZA-US02, UN40H4005AFXZA-TS01 Owner’s Manual

I I I

only and may differ from actual product appearance. Product design and the purchaser. Conditions covered are limited only to manufacturing

I Figures and illustrations in this User Manual are provided for reference Transportation to and from the Service Center isthe responsibility of

specifications may be changed withoat notice, defects in material or workmanstqip, and only those encountered

Important Warranty Information Regarding

Television Format Viewing

=_ See tile warranty card for more information oil warranty

terms.

Wide screen format LED Displays (16:9, the aspect ratio ofthe screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should

primarily be inthe wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non- expanded standard format television video and programming, should be limited to no

more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market

reports, video game displays, station loges, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark

bars. On LED models that offer picture sizing features, use these controls to view different formats as afull screen picture. Be careful

in the selection and duration of television formats you use for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung

limited warranty.

- SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED

WARRANTY STATEMENT Subject to the requirements, conditions, exclusions and limitations

of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally

provide Warranty Repair Service inthe United States on SAMSUNG

products purchased in Canada, and in Canada on SAMSUNG

products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service (}enter. Along with this Statement,

the Original Limited Warranty Statement and a dated Billof Sale as Proof of Purchase must be presented to the Service (}enter.

innormal use of the product. Excluded, but not limited to, are

any originally specified provisions for, in-home or on-site services,

minimum or maximum repair times, exchanges or replacements,

accessories, options, upgrades, or consumables.

Forthe location of a SAMSUNG Authorized Service Center, please

call toIHree:

-- In the United States : 1-800-SAMSUNG (1-800-726-7864

-- In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture files) or still

image elements (such as TV channel loges, TV shows or movies in panorama or 4:3 format, stock or news scroll bars, etc.) on the

screen. The constant display of still pictures can cause ghosting or

image burn-in (image retention) on the LED screen, which will affect image quality.To reduce the risk of this effect, pleasefollow the

recommendations below:

- Avoid displaying the same TV channel for long periods.

- Always try to display any image in full screen mode. Use the TV's Picture Options menu to select the optimal screen size.

- Reduce brightness and contrast values to the minimum required to achieve the desired picture quality. Values that exceed the minimum may speed up the burn-in process.

- Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to proper user manual section for

details. Contact SAMSUNG WORLD WIDE

If you haveanyquestionsor comments_e!atingto Samsungproducts, i

pleasecontactthe SAMSUNGcustomercarecenter.

Samsung Electronics Samsung Electronics Canada Inc. 2050 Derry America, Inc. 85

Road West, Mississauga, Challenger Road

Ontario L5N OB9 Canada Ridgefield Park, NJ 07660

1-800-oAMSUNG (726-7864)

vww,Lsamsung.com/ca/ support (English) vwwv.samsung.com/cafr/ support

support (French)

Your TV hastwo kinds of menus, the Main menu and the various Tools menus. The Main menu gives you access to most or all of the menu options available on your TV.The Tools menus display a selected number of frequently used menu options that change depending on the screen you are viewing.

The Main menu has seven primary categories:

" Picture o Input

" Sound o Application

" Channel o Support

- Setup

To view the Main menu, press the MENU button on your remote. To view a Tools menu, press the TOOLS button on your remote.

'_' The menu options that appear in the Main menu depend

on the Source you have selected. For example, if you have selected the HDMI source, the Channel category will not

appear. To see the Channel category, you must first select TV in the Source List.

The Menu options are presented below, arranged by Main menu categories. A Tools button symbol (_['_ll) next to an option

name indicates the option is also available in one of the Tools menus.

Mode

Select your preferred picture mode.

'_' When your TV is connected to a PC, you can only select

Entertain and Standard.

[] Dynamic: Brightens the screen. Suitable for a bright room. [] Standard: Suitable for a normal.

[] Movie: Darkens the screen, making it less glary.Suitable for

watching movies in a darkened room.

[] Entertain: Sharpens the picture. Suitable for games.

_ Only available when the TV is connected to a PC.

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

[] Backlight: Adjusts the brightness of the screen by adjusting the

brightness of the individual pixeIs.

[] Contrast: Increases or decreases the contrast between dark and

light areas of the picture.

[] Brightness: Adjusts the brightness of the screen. Not as

effective as BacHight.

[] Sharpness: Sharpens or dulls the edges of objects. [] Color: Adjusts the color saturation. The higher the Color setting,

the more intense the color. Low settings remove color and the

picture becomes black, white and gray.

[] Tint (G/R): Adjusts the amount of green and red in the picture.

As you increase the amount of green, the amount of red decreases and vice versa.

'_' When the TV is connected to a PC, you can only make

changes to Backlight, Contrast, Brightness, and Sharpness.

Picture Options

=_ When the TV is connected to a PC, you can only make

changes to ttqeColor Tone, Size and HDMI Black Level.

[] Color Tone (Cool / Standard / Warm): Cool makes the picture

bluer (cooler). Warm 1 and Warm 2 make the picture redder (warmer).

[] Size: Set ttqesize and aspect ratio of the picture on the screen.

Your cable box or satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use

ttqeTVs 16:9 mode most of the time.

=z The menu is deactivated, when ttqe H. 264 (1080p) DTV is

being played.

16:9: Sets the picture to the 16:9 wide screen format. Zoom1 : Provides moderate magnification of the picture. Sides,

top, and bottom are cut off.

Zoom2: Provides larger magnification of the picture. Sides, top, and bottom are cut off.

Wide Fit: Enlarges ttqeaspect ratio of the picture so the picture fits the entire screen.

4:3: Sets ttqepicture to the old, 4:3 format and puts black or gray borders on the right and left of the picture.

=z Do not watctq your TV in ttqe4:3 format for a long time.

Traces of borders displayed on the left, right and center of the screen may cause image retention (screen bum) wtqictq is not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when

your TV is inputting HDMI (720p/1080i/1080p) or Component

(1080i/1080p) HD signals.

=z HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

=z You can adjust and store settings for eactq external device you

have connected to an input on the TV. Picture Sizes available by hqputSource are listed below:

ATV,AV,Component (480i, 480p) Zoom2, 4:3

DTV(1080i),Component (1080i, 1080p),HDMI 16:9, Wide Fit, (720p, 1080i, 1080p) 4:3, Screen Fit

[] Digital Clean View (Off / Low / Medium / High / Auto) : If the

broadcast signal received by your TV is weak, you can activate ttqe Digital Clean View feature to reduce any static and ghosting ttqat may appear on the screen.

=z When the signal is weak, try all ttqeDigital Clean View

options until the TV displays ttqebest picture.

[] HDMI Black Level (Normal / Low) : For HDMI signals, select

ttqe black level to adjust ttqe screen depth. Low make blacks look

darker.

=z Available only in HDMI mode (RGB signals).

[] Film Mode (Off / Auto) : Sets the TV to automatically sense and

process film signals from all sources and adjusts the picture for

optimum quality.

=z Available in ATV, DTV (interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

[] Motion Lighting (Off/On): Reduce power consumption by

brigtltness control adapted motion.

=z Available in Standard mode only.

16:9, Zoom1,

Picture Reset

[] Picture Reset (Reset Picture Mode/Cancel): Resets ttqe

picture settings to their factory defaults.

Mode

[] Standard: Selects the normal sound mode. [] Music: Emphasizes music over voices.

[] Movie: Provides the best sound for movies. [] Clear Voice: Emphasizes voices over other sounds.

Equalizer

Available in Standard sound mode only. [] Balance L/R: Adjusts the balance between the right and left

speaker.

[] 100Hz / 300Hz / 1 KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the loudness of specific bandwidth frequencies.

[] Reset: Resets the equalizer to its default settings.

DTS TruSurround

Available in Standard sound mode only.

DTSTruSurround is a patented DTS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,

including internaltelevision speakers. It is fully compatible with all

multichannel formats.

Preferred Language

Digital channels only.

DigitaI-TV broadcasts can transmit many audio tracks simultaneously (for example, simultaneous translations of a program

into foreign languages).

'_' You can only select a language from among the ones being

broadcast.

Multi-Track Sound (MTS)

Analog channels only. [] Mono: Select for channels that are broadcasting in mono or if

you are having difficulty receiving a stereo signal.

[] Stereo: Select for channels that are broadcasting in stereo. [] SAP: Select to listento the Separate Audio Program, which is

usually a foreign-language translation.

'_' Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP

Auto Volume

Automatically adjusts the volume levelwtqen you ctqangevideo sources or content so the level remains the same.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an

uncompressed digital audio signal when you connect the digital audio jack on the back of the TVto a digital audio in jack on a

receiver or home theater. [] Audio Format (PCM/Dolby Digital): You can select the Digital

Audio output (SPDIF) format. The available Digital Audio output format may differ depending on the input source.

'_' By connecting the TV to a receiver or home theater with

Dolby Digital and 5.1ch speakers and selecting Dolby Digital, you can maximize your interactive 3D sound experience.

[] Audio Delay: Lets you correct timing mismatches between the

audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external

device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the

slider. Press ENTER _ when done (0ms _ 250ms).

Speaker Select

A sound echo may occur due to a difference in decoding speed

between the main speaker and the audio receiver. In this case, set

the TV to External Speaker.

'_' When Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the sound settings will be limited.

'_' When Speaker Select is set to External Speaker.

* TV Speaker: Off, External Speaker: On

'_' When Speaker Select is set to TV Speaker.

* TV Speaker: On, External Speaker: On

'_' If there is no video signal, both speakers will be mute.

Visual Impaired

Digital channels only.

Adds verbal description to the main audio to help the visually

impaired.

Sound Reset

[] Reset All: Resets all sound settings to ttqefactory defaults.

_3Memorizing Channels

When you first set upyour TV using Plug & Play, the TV

memorized the channels that were available over the air or through your cable system and added them to the Channel List. The Antenna and Auto program functions described below let you

re-run the channel memorization function without having to re-run the Plug & Play procedure.

Antenna (Air / Cable)

Before your television can memorize the available channels, you

must select your TV's signal source, Air (using an antenna) or

Cable. Select Menu >Channel > Antenna > Air or Cable. After you have selected the signal source, go on to the Auto Program

function.

'_' Selecting the signal source using the Antenna function also

determines the signal source the TV is tuned to. For example, ifyou receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture.

Auto Program

The Auto Program function memorizes all ctqannelsthat are available over the airor through your cable system and adds them

to the Channel List. To start Auto Program, follow these steps:

1. Push MENUrrrl _ Channel _ Auto Program _ ENTER_ on your remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV signal.

Air

Ifyour TV is connected to an antenna choose Air, and ttqen press ENTER _. The TV will automatically start memorizing channels. Cable

Ifyour TV is connected to a cable outlet, ctqoose Cable, and then press ENTERS. Go to Step 3.

Auto

If you choose Auto, and then press ENTERS, the TV will automatically select the correct Antenna source. Go to Step 3.

3. On the Cable Type screen, use the _/I_/A/T buttons to select the type of digital and analog cable systems you have: STD, HRC,

or IRC. Most systems are STD (Standard). When done, select Start, and then press ENTER _. The TV will start memorizing

channels.

=z Channel memorization can take up to 45 minutes, depending

on your cable system.

=z Memorized ctqannels are added to ttqe Added Channels

list. These are ttqe channels you will see wtqen you use ttqe Channel buttons on your remote.

Clear Scrambled Channel

This function filters out scrambled cilannels after Auto Program is

completed. This process may take up to 20_30 minutes. =z Press the ENTER _ button to stop the Clear Scrambled

Channel.

=z This function is only available in Cable mode.

C3Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels

you've scheduled for viewing. Add or delete Favorite channels, add

or delete channels from the Added Channels list, schedule channels or programs for viewing. Watch a channel by selecting the channel

in the All Channels, Added Channels, or Favorite screen, pressing

the A / T buttons, and then pressing the ENTER_ button.

Channel List Screens icons are listed on the left side. Select an icon using the A/T buttons to view each list. [] _ All Channels: Shows all currently available channels including

[] _ Added Channels: Shows all Added Channels. These are the

channels that appear when you press the CH LIST button.

[] _ Favorite: Shows allfavorite channels.

those you deleted from the Added Channels

list,

[] (_ Programmed: Shows all ctqannelsand programs currently

'_' Remote control buttons active on the Channel List screen.

* Green (Zoom): Enlarges or shrinks a channel number. * Yellow (Select): Move the cursor to a channel. Press the Yellow

button to select the channel. A _ mark appears. Repeat to select additional channels. Then, open the Tools menu and apply a function to the channels you selected.

* _r3 (Tools): Displays the Channel List Tools menu. (The Tools

menus may differ depending on the situation.)

scheduled using Timer Viewing.

Display Icons Used in the Channel List Screens

A selected channel.

.,z

A Favorite channel.

A reserved program. A program currently being broadcast.

_3The Channel List Tools Menu

The Channel List Tools menu contains most of the functions you can use on the All Channel, Added Channels, and Favorite List

screens, [b view, select a list screen, select a channel, and then

press the TOOLS button, [] Add / Delete: Delete a channel from or add a channel to the

Added Channels list.

To delete channels from the Added Channels list, follow these steps:

1. Select one or more channels in the Added Channels list using the &/_ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Delete in the Tools menu, and then press the ENTER

button.

To add channels to the Added Channels list,follow these steps:

1. Select one or more channels in the All Channels list using the A/_' buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Add inthe Tools menu, and then press the ENTER

button.

'_' All deleted channels will be shown on the All Channels list.

You add channels back to the Added Channels list on the All Channels list.

'_' A gray-colored channel indicates the channel has been

deleted from the Added Channels list.

'_' The Add menu option only appears for deleted channels.

[] Add to Favorite/Delete from Favorite: Lets you add channels to

and delete channels from your Favorites list.

To add channels to the Favorites list, follow these steps:

1. Select one or more channels in the All Channels list using the A/T buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Add to Favorite in the Tools menu, and then press the

ENTER_ button.

BN68 05829L-00

To delete channels from the Favorites list,follow these steps:

1. Select one or more channels in the Favorite Channels list using the A/T buttons and the Yellow Select button on your

remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Delete from Favorite in the Tools menu, and then press the ENTER _ button.

[] Timer Viewing: You can schedule a channel to be displayed

automatically at aset time, even when you are watching another channel. You must set the current time first in the Time > Clock

function to use Time Viewing.

To schedule a channel, follow these steps:

1. Select a channel in the Added Channels list using the A/_ buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Time Viewing in the Tools menu, and then press the ENTER _ button. The Time Viewing screen appears.

4. Use the _/1_ buttons to move from entry field to entry field and the &/_ buttons to change the entries. Where numbers are displayed, you can also enter numbers directly using the number keypad on your remote.

'_' If you select Everyday or Every Week, the date you

select in the Date field becomes the start date for your scheduled viewing. For Everyday, the TV will turn on every day, at the time you selected, starting from that date. For Everyweek, the TV will turn on every week, on the same day of the week as the start date you selected, at the time you selected, from that day on. If you select Once, the TV will turn on once, on the date and time you selected.

5. Press the ENTER _ button on your remote when done.

_' Only Added Channels can be scheduled. _' Scheduled programs and channels are displayed in the

Programmed List.

'_' When you select a digital channel, press the !_ button to

view the digital program list. If you highlight a program in the list, and then press the ENTERS(Schedule) button, you set Timer Viewing for that program directly.

[] Channel Name Edit: Analog channels only. Lets you assign a

name of up to five characters to an analog channel. For example, Hist, Food, Golf, etc. This makes it easier to find and select a

channel.

[] Select All: Select all the channels in the displayed channel list. [] Deselect All: Deselect all the selected displayed channels.

'_' You can only select Deselect All when one or more

channels are selected.

[] Auto Program: See Auto Program under Memorizing Channels.

-t-

@_Programmed List (on the Channel List Screen)

The Programmed list displays the channels and programs you

have scheduled for viewing using the Time Viewing function. You can view, modify, or delete a show you have scheduled using the functions on the Programmed List screen Tools menu.

Programmed List Screen Tools Menu

[] Change Info: Change the scheduling informationfor a show or

channel you have scheduled.

To change the information,follow these steps:

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER_ button.

2. On the Programmed List screen, select the show or channel entry you want to change, and then press the TOOLS button. The Tools Menu appears.

3. Select Change Info, and then press the ENTER _ button. The Time Viewing screen appears.

4. Use the _/!_ buttons to move from entry field to entry field and the A/V buttons to change the entries. Where numbers

are displayed, you can also enter numbers directly using the number keypad on your remote.

5. Press the ENTER _ button when done.

[] Cancel Schedules: Cancel a show or channel you have

scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER_ button.

2. On the Programmed List screen, select the show or channel entry you want to cancel, and then press the TOOLS button. The Tools Menu appears.

3. Select Cancel Schedules, and then press the ENTER button. The Cancel Schedule screen appears.

4. Select OK, and then press the ENTER _ button.

[] Information: Display the informationfor a show or channel you

have scheduled. You can also change the schedule Information.

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the ENTER_ button.

2. On the Programmed List screen, select the show or channel entry you want information for, and then press the TOOLS button. The Tools Menu appears.

3. Select Information, and then press the ENTER _ button. The Time Viewing Information screen appears.

4. Select Change Info and press the ENTER_ button to change information, or select Close and press the ENTER

button to close the Information screen.

[] Select All / Deselect All: You can select or deselect all channels

in the channel list.

_3 Other Channel Menu Functions

Channel Mode (Added Channels/Favorite Channels)

Lets you select the channel list displayed when you press the ACHV (Channel) button on your remote. For example, if you

select Favorite Channels, you will only see Favorite channels when you press the ACHV button.

Fine Tune

Analog channels only.

Ifthe reception isclear, you do not have to fine tune the channel, as this isdone automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel

manually.

'_' Select the channel, and then select Fine Tune.

'_' Fine tuned channels that have been saved are marked with

an asterisk "*" on the right-hand side of the channel number in the channel banner.

'_' To reset fine-tuning, select the channel, select Fine Tune, and

then select Reset on the Fine Tune screen.

Plug & Play

Lets you re-run the Plug & Play initial setup procedure. For

instructions, see your Quick Start Guide.

Language Set the menu language.

'_' Choose between English, Espahol, and Francais.

_3 Setting the Time

Time

'_' The time you set will appear when you press the INFO

button.

[] Clock: Set the clock so you can use the various timer features

of the TV.

'_' If you disconnect the power cord, you have to set the

clock again.

To set the clock, follow these steps:

1. Select Setup >Time > Clock.

2. Press ENTER _ and select Auto or Manual, and then press ENTER _ again.

if you selected Auto:

The TV will automatically download the correct time from a

digital channel.

- Select Time Zone, and then press the ENTER _ button.

Use the_,/_' buttons to select your Time Zone, and then press ENTER _.

- Select DST (Daylight SavingsTime), and then press

ENTER _. Select On if you want to turn the DST adjustment on and off manually. Select Off to turn off the DST adjustment. Select Auto if you want the TV to adjust to DST automatically. Press ENTER_ when done.

_' DST and Time Zone function are only available when

the Clock Mode is set to Auto.

-2- -3- -4-

if you selected Manual: The Clock Set screen appears. Use the &/T buttons to

change the values in each field or use the number buttons to enter the values directly. Use the ,_/_ buttons to move from field to field. When done with all the fields, press ENTER _.

'_ Available only when Clock Mode is set to Manual.

[] Sleep Timer

Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

'_' To cancel the Sleep Timer, select Off.

Timer 1/ Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you

select. You can set three different on/off timer settings. '_' You must set the clock first.

[] On Time / Off Time: Set the hour, minute, am/pm, and

ActivatdlnactNate fields for the On Time and Off Time. Use the

_/!_ buttons to move from field to field. Use the A/T buttons

to change the values in each field. To activate the timer with the setting you have chosen, set the Activate/Inactivate field to

Activate.

[] Volume: Set the desired loudness. [] Contents: To select what will be turned on when the timer

setting is activated. You can set the TV to turn on a specific channel or play back contents such as photo or audio files.

Use the ,_/_ buttons to move to move to the Contents field, and then press the ENTER _ button. The Contents screen

appears. Use the _/!_ buttons to move from field to field. Use the &/_ buttons to change the values in each field.

- TV/USB: Select TV or USB. The USB device must be connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

- Channel: Ifyou have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, follow these steps to select a folder containing MP3 (Music) or JPEG (Photo) files on

the USB device:

_' The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

'_' The media may not be playing smoothly when using the

device lower than USB 2.0.

1. Use the ,_/_ buttons to move to the field under Music

or the field under Photo, and then press the ENTER

button. The TV displays a single folder (the Root folder)

and the type or name of the device.

2. Press the ENTER _ button. A list of folders on the device

appears.

'_' If there are no folders on your device, press the

Yellow select button to select the Root folder, and then press the RETURN button. The Timer screen

re-appears.

3. Use the A/T buttons to highlight a folder that contains

music or photos, and then press the Yellow select button

to select the folder.

4. Press the RETURN button. The Timer screen re-appears.

[] Repeat: Select Once, Everyday, Mon-Fri, Men-Sat,

Sat-Sun or Manual. If you select Manual, you can select the days you want to activate the timer by using the _1/!_ buttons

to highlight the day, and then pressing the ENTER _ button.

To unselect a day, highlight it, and then press the ENTER _

button.

When you finished making allyour selections on the Timer screen,

press either the ENTER _ or RETURN button.

_3 Other Features

Program Rating Lock

The Program Rating Lock feature lets you block programs you've determined are inappropriate for your children based on

the program's ratings. To access the Program Rating Lock feature and make any changes, you must enter a PIN (personal

identification number). Towatch a blocked program, you must also

enter the same PIN.

'_' Program Rating Lock is not available in HDMI or

Component mode.

'_' The default PIN number of a new TV set is "0-0-0-O". You can

set your own PIN using the Change PIN function.

How It Works

When you access the Program Rating Lock Menu functions for the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen closes and the Program Rating Lock Menu appears. Every time you access the Program Rating Lock functions, the PIN screen will appear and you must enter a PIN.

When the Rating Lock screen appears, select Program Rating

Lock, and then press ENTER _. Select On, and then press the ENTER _ key again. Depending on what type of programs or

movies you want to block, select one of the options on the screen,

and then press the ENTER _ button. The options are listed below: [] TV Parental Guidelines: You can block TV programs based

on their ratings. This function allows you to control what your children are watching.

[] MPAA Rating: You can block movies based on their MPAA

ratings. The Motion Picture Association of America (MPAA) has implemented a rating system that provides parents or guardians

with advanced information on which films are appropriate for children.

[] Canadian English: You can block TV programs based on their

Anglophone Canadian ratings.

[] Canadian French: You can block TV programs based on their

French Canadian ratings.

[] Downloadable U.S. Rating: Parental restriction information can

be used while watching DW channels.

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same way for each option. Each option displays a grid or table. All the tables have ratings listed on the left. The TV Parental Guidelines option also has kinds of content listed across the top: ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog.

To IocWblock movies or shows with certain ratings and/or kinds of content, click the square next to the rating and/or under the kind of content. A lock appears. To unlock/unblock, click the square again. When you click a low rating, all the ratings above it will also display

locks. You can also Allow All or Lock All. When done, press the RETURN button onyour remote.

[] Change PIN: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter them in Enter New PIN fields. Re-enter the same 4 digits in Confirm New PiN fields. When the

Change PIN screen disappears, press the OK button. The TV

has memorized your new PIN. '_' If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to "0-0-0-0" : POWER (off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on)

Game Mode (On/Off)

When you connect a game console such as a PlayStation TM or Xbox TM to your TV,you can enjoy a more realistic gaming experience by turning on the Game Mode function.

'_' Precautions and limitations for game mode:

° Before you disconnect the game console and connect another

external device, set Game Mode to Off inthe setup menu.

° Ifyou display the TV menu in Game Mode, the screen shakes

slightly.

'_' Game Mode is not available when the input source is set to

TV.

'_' After connecting the game console, set Game Mode to On.

You may notice slightly reduced picture quality.

Caption

(On-Screen Text Dialogue) [] Caption: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the screen.

'_' The Caption feature does not work inComponent or

HDMI mode.

[] Caption Mode: You can select the desired caption mode.

Default / CCl -CC4 / Text1 -Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1 -Service6 / CCl -CC4 / Text1 -Text4:

(Digital channels only) The Digital Captions function works with

digital channels.

'_' Service1-6 may not be available in digital caption mode

depending on the broadcast.

[] Digital Caption Options: (Digital channels only)

Size: Options include Default, Small, Standard and Large. The

default is Standard.

Font Style: Options include Default and Styles 0 to 7. The

default is Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

color of the letters. The default isWhite.

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the captions. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

'_' Digital Caption Options are available only when you can

select Default and Service1 - Service6 in Caption Mode.

'_' The Foreground and Background cannot be set to the

same color.

Boot Logo

Enable/disable displaying the logo wt_ilethe TV starts up.

Eco Solution

[] Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjust the brightness of the TV in order to reduce power consumption. Ifyou select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume

button to turn on the screen.

[] Eco Sensor (Off / On): Toenhance your power savings; the

picture settings will automatically adapt to the light in the room. '_' If you adjust the Backlight, the Eco Sensor will be set to Off.

Min. Backlight: When Eco Sensor is On, the minimum screen brightness can be adjusted manually.

'_' If Eco Sensor is On, the display brightness may change

(become slightly darker in most cases) depending on the surrounding light intensity.

[] No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets

how quickly the TV switches to standby mode, if no picture is being received.

_ Disabled when the PC is in power saving mode.

[] Auto Power Off (Off / On): The TV will be automatically turned

off when no user operation is received for 4 hours.

Auto Protection Time

[] Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10

hours): Ifthe screen remains idlewith a still image for a certain period of time you define, the screen saver is activated to prevent

the formation of ghost images on the screen.

_nosis

[] Picture Test: Use to check for picture problems. If the problem

appears in the test picture, select Yes and follow the directions on the screen.

[] Sound Test: Use the built-in melody sound to check for sound

problems. If the problem occurs during the test, select Yes and

follow the directions on the screen.

[] Signal Strength: (Digital channels only) An HD channeFs

reception quality is either perfect or the channels are unavailable.

Adjust your antenna to increasesignal strength.

[] Reset: Reset all settings to the factory defaults.

'_ The PIN inputscreen appears before the setup screen. '_' Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest firmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to ttqe

TV.

Contact Samsung

View this informationwhen your TV does not work properly or when you want to upgrade the software. You can find information

regarding our call centers and how to download products and

software.

Enjoy photos, music and/or movie files saved on a r----q USB Mass Storage Class (MS(}) device.

_3Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, and/or movie files to the USB jack on the back of the TV. A pop up window appears.

3. Press the MED_A,P button on your remote. The Media Play menu appears.

_3Using the Media Play Menu

To open Media Play in the Menu, follow these steps:

1. Press the MENU button. Then, press ttqe _ or _ button to select Application on the left, and ttqen press ttqe ENTER

button.

2. Press the • or • button to select Media Play (USB), and then press the ENTER _ button.

3. Press the _ or I_ button to select an icon(Videos, Music, Photos, Settings), and then press the ENTER _ button.

Media Play might not work properly with unlicensed multimedia files.

_' Need-to-Know List before using Media Play (USB)

° The file system supports FAT16, FAT32 and NTFS. ° Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

° Media Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV's USB pelt. USB HDD ia not suppolted.

° Before connecting your device to the TV, please back up your

files to prevent them from damage or loss of data. SAMSUNG is

not responsible for any data file damage or data loss.

° A USB device that requires high power (more than 0.hA) may not

be supported.

° Do not disconnect the USB device while it is loading. ° The higher the resolution of the image, the longer it takes to

display on the screen. ° The maximum supported JPEG resolution is 15360 x 8640 pixels. ° If a file is corrupted or the TV does not support the file type, the

"Not Supported File Format" message appears.

° The TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution, and management of digital content in an integrated and comprehensive way, including protecting the rights and interests of content providers, preventing illegal copying of contents, and

managing billing and settlements.

-5-

[UH4005-ZA]BN68-05829L_00EN(}.indb 1 2014-06-25 _]_3:15:44

-6-

-7-

-8-

\.._/

" PTP devices are not supported.

• If an oval power warning message is displayed while you are connecting or using a USB device, the device may not be

recognized or may malfunction

" If the TV has no input during the tree period set in Auto

Protection Time, the Screen:saver wll run,

" rhe power savirg mode of some external hard dsk drNes may

be released a 17)mat cally when your connect them to the TV.

" If you use a USB extension cable, the IV may lot lecognize the

USB device or may not be abe to read tre fi!es on the devce

" If a USB device col_ltected to the [V is riot rex;ognized, the Ist of

fies on the device is corrupted, or a fie in the li£: s not played, connect the USB device to a PC, format tile day ca, and ch_:k

the connect on

• If a fib you deleted from the PC is stl} fou]d when ycu run Media

Play, use tile "En/pty the Recycle Bin" %nction on the PC to

permanently delete the fie.

• Photos only supports the seq lentiai peg format

• The Videos option does not support the scene scare i and thumbnal functions

• If the r urnber of ties ar, d folders saved oll a USB storage devce is ever apploxrnately 4000, [he files and folders may not appear and some folders may not open.

• rhe maxirnurn displayed number o! fes, irlcludi ]g sub tolders, in one tolder of USB storage device is 2000,

" The media may not be playing smoothly when using the device

lower than USB 20

Videos

1. In the Media Play menu, press the "q or _ button to sdeot Videos, and then p!ess the EN1ER 12_ button.

2. Press the _I!I_/A/'_ buttons to seect a video in the file list.

3, Press the ENIER _ button or/_:- (Play) button.

The file name is displayed on the top of the screen with the

play ng time. if video time nformation s unknown, playing time and the

progress bar are noL displayed During video playback, you carl search using the _ and

i_ buttons.

%, n this mode, you CaR play movie oiips contained in a game,

but you cannot play the game itself.

,, Supported Subtitle Formats

External

MPEG-4timed text

SAML

SubRip SubViewer Micro Dvr)

SubStation Alpha

AUvancedSubataqo,_Alpha

Internal

Xsub

SubStab)n Apha

Advanced SubSta_bnAbhs

Subeip

MPEG-4Timed text

" Supported Video Formats

iiiiiiiiilIlIjijlijlijliljiliiliilillllil#ii_!;i_i_#ij;ij;ijljijlijlijiiljijiijiiliiljilllIijIiji

_t urn! sr_

sub

sub or txt

s_ ac<;

jiJilj}j}j}j}ij!_N_@:i:i:i:i:i:i:i:i:i:(jiiiiiiiiiiiiiiiiiiiii_!_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!i

AVI PictureFormat

MKV text I:::ormat MKV text Format MKV ;_x[ Forr-tst MP4 T_,t Fomlat

................................!2: .....................................

Other Restrictions

Video content will not play, or not play correct y, if there is an error in the content or the conla net

Sound or vdeo may not work if the contents have a standard

bit rat0/1rome rate above the compatib e Frame/sec listed in the

Supported Video Formals tab!e

if the Index Table erroneous, the Seek (Jump) funct on s not

supported.

_,The mer/u may take longer to appear if the vdeoS bit rate

exceeds 10Mbps.

o Video content car/not be played ifthere are many oorlter ts ip

one file

i_i_};_cod_:i::;iiiiii!;i:i!i!i!i_;i!i!!!_i_i{!i_iiii!!ii{iiiiiiii{{iiiiliiiiiiiiiiiiiiii_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_ii_iiiiii!i_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiili!iiiiiiiii_iiilPhotos

Supports up to _1 264, Level 4,1 H,264 FMO / ASO / RS, VC1 SP / MP / AP/4 and AMCHD are

not supported, MPEG4 SR ASP

Below 1280 x 790:60 frame max

- Above 1280 x 720:30 frame max H263 is not supported

GMO is not support,

Supports up to WMAT, 8, 9 STD, g PRO, 10 PRO WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR

mode of WMA Pro is not supported) WMA Lossless is not supported.

Music

1, In the Media Play menu, press the 41or _ button to select

Music, and then press the FNTERL_ b £ton.

2, Press the ._/t_/A/_ buttons to select tbe desired Music in the

file Ist

3. Press Ihe EN'TER_ button or _ (Play)button. _-_ During music pla_yback, you can search using the _i and

1_ button.

_'_sha_l(PEW) and _ (FF) buttons do not function dudng

play•

_<', Media Play oniy displays flea with MP3 and PCM file

exte lsion Other file extensions are not displayed, even if they

are saved on the same USB devce

%, if Lhesound is abnormal wi]en playing MP3 files, adjust Lhe

Equalizer in the Sound menu {An overmsodulated MP3 fie may cause a sound problem.)

1. In the Media Play menu, press the _1 or I_ button to select Photos, then press the ENrER EC_ button

2, Press the _i/l_-/_/_" buttons to select a photo in the fi!e list 3, Press the {:NTER _ button or _ (Pay) button

%, NOIE

• All files n thetile Ist section will be displayed in theslide show. " Buring the sde show, files are displayed inorder•

" During the sde show, you can adjust the side show speed

• You can move to other files usng _t or I_ button.

%. Media Play can pay Music ties aulomatioally during a Side

Show f Background Music is set to On

s_s_You cannot charge the Mode in Background Music unLilthe

Background Music file has f n shed loading•

Supported Photo Formats

Other Restrictions

CMYK, YCOK Co!or space JPEG are not supported.

Playing Multiple Files

[] Playing selected video/music/photo files 1, On the Fie List screen, highlight a file, and then press the Mellow

button on your remote,

2, Repeat Step i to seect muitipie files

_:'_NOTE

" A ./ mark appears o the lef of the seiecled flies " To cancel a selection, press the Yelow button agafil " To deselect all selected files, press the TOOLS huron, seect

3. Press the TOOLS button, seect Play Selected Contents, and then press Ihe ENTER [_ button

[] Playing a video/music/photo folder 1, With the _clders on your USB devce displayed, use me

41/!_/_/lr buttons to h ghlig it a folder:

2, Press the IOOLS button, seect Play Folder, and Ihen press the

ENTER _ button.

While a photo list is d splayed, press the _ (Play)/ EP,R ER_ '# button on the remote control to start a slide show.

using (_) (REW) or (_]) (EF)button

Deselect All, and then the EN HIRe* _ button,

Media Play - Additional Functions

[] Videos/Music/Photos Play Option menus When playin a file press thelOOES button

Title You can select another video file

Repeat Mode '%u can play movie and music

Picture Size Youcan adiust the picture size to

Picture Mode 'g'_Lcan adjust the pictLre setting. _Z ,7 Sound Mode You car/adjust tJ-le sound setting. `7 -7 _/

Subtitle Subt ties, Ths function oniy works Setting if the subt ties have !he sarrle file -7

Audio Format You can select the digital audo

Audio language if the video has more _/ Language _han one language

Stop Slide Show / You can start or step a Side Start Slide Show. -7

Show

Slide Show You can select the s!de show Speed s_eaJ during the side show• -7

Background You can set and seect Music background qtus[c when -4'

Zoom '7oucap zoom into images in full

Rotate You can rotate images infull

Information You can see detailed isformation

Installing the Wall Mount Kit 1he wall mount kit (sold separatey) allows you to moun the W on

Lhewall For detailed info mation about installing the wall mount, see

Lheinstruct oqs prov ded with the waft nlourt items. Contacl a technician for assistance when nstai ng the wal mount bracket

mount on your own. Wall Mount Kit Specifications (VESA)

%_ The wall mount kit is not supped, but sold separately. nstell your waft mount on a solid wai perpendicular to the floor.

When attach ng te other boiding materials, please contact your nearest dealer if you install the TV on a ceiling or slanted wal. may tall and result in severe persona iqur%

Io play directly -7

files repeatedly. -7 -7

you_preference -7

You car/play Lhe video with

name as the video.

output fomat -7 YOUcan change the audio

watch ng aSide Show

screen mode, "4"

scre_;n mode. -7

about the played fib, -7 ,7' -7

_ _o may gause the 1v tp tip Over, r_sulting in _eriouS

%', NOTE

" Standard d mansions for wall mount kits ae siqown in the table

below.

" When purchasing our wal! mount kit, a detailed installal on

manual and all parts necessary for assembly are provided•

" Do not use screws that de not comply with the VESA standard

screw spec fications

° De r'ot use screws that are onger than the standard dimension

or do not eompy with the VESA standard screw specifications. Screws that are too ong may cause da nage to the inside of tie

TV set,

• For wall llounls that do not co 71p!y witil the VESA standard screw specifications, the bngth of rise screws may differ depending on the wail mounL specificat ons

• Do not fasten the screws too firmly This n-ay damage the producL o_ cause the product to full. leading lu personal il july Samsung is not table for these kinds of accidents

° Sat 1sung is not table for product damage or personal injury

when a nomVESA or non spec fed wall mount s Jsed or the consumer fails to follow the product installation instructio _s

" Do not mount Lhe V at more than a 15 degree tit. " Always have two people rount the TV on a wall

Securing the "iV to the Wall

/{_ Caution Pu}lin9 pushing or¢!imbingon[othe W

may cause the W tq fall, In partioula,, ass{me that your

ch dten do nothang ever Df d_atabiJiZe the lV, doing

injuries or _eath. Foll®'wai! safBV preaautbnS presided

on _heincluded Safety Eyet. For added stability, ins!a!!

theant[ {all devbe re, safety purposes, as fol{ows

To prevent the TV from falling %, Since tf/e necessary brackets, screws, and string or oabie are

not supplied, please purchase these separately

1, Inset: the screws into the wall brackets and frmly fasten them to

the wall Make sure the screws are firmly fixed ta the wall.

'%. We strongly recommend you drive the screws into a stud.

el the TV

3, Connect the brackets on the TV and the brackets on the wall

with a strong string or cable, aRd then tie the string or cable

tightly to the brackets.

_÷>.Veriiy a connections are properly secured. Periodically check

professional installer

%. Install the TV dose to the wall so thai it does not loll _s Connect the string or cab}e so that the brackets on the wal

are at the same height or lower than the brackets on the TV Untie the string or cable before moving _he FV

%, TO purchase a TV Holdel kit, con act Samsung customer

care

_ton Lock The Kensington Lock is not suppled by Samsung. It s a device

used to physically fx the system when using t in s public pace. Refer to the manual provided with the Kensington ock for additiona

irlformaLon on proper use. _:'_ Please find a 't_' icon on the rear of the TV The Kensington

slot is beside the "_" icon

R_ The posidon and color may differ depending on the model

Assembling the Cable manager

Display Modes (HDMI/DVI Input)

Optimal resolution: 1366 x 768@6OHz

640x4_}) L ',!,o00 ;024o L _ J Z

r,&c 8s2 x (;24 [ 49 _s6 74_;i i;L%4 [_:L .] -z

1¢52xs_s F 6s681 _so62 ioo¸@o [ ,

_4o x 48o _, 31469 59 _4,o 25 i75 i ' I ,z

(}40x 480 :_ ;00 ;(100 1U}O _ / "/

.........._X577L6'_£" ..................... 17 .........

800x 600 I 4807/ 7218_211s_ 50%0 [ [,_ I

10/4 _ L(JSW/J 363 }0004 I 000 I ' I X"/

lO_,t_ i ',';_, 7006} I , o6o i ' I v

'v'[ SA )M l .........................

12_0x 72( /4_000 (0O00 r42,) , , I '_ 1280xEoo I ,1!_702 5)8/0 8s50,? I _ l

.......... I ......................... I [:,[

1%x 1024 7_76 7-0_1 1:;000 { I

Troubleshooting

If tbe TV seems to have a problem, first review Lhislist of possible problems and solut on. If none of these ttoubbshoot ng tips apply, vsit samsung corn, then cick on SupporL, or call Samsung customer service at 1 800 SAMS JNG.

Flickering and Dimlssing If you; SamSL ng Teb,4sion is flicker ng or dimming spot edically, you may nexsd to disabie some of its enelgy efficient

Component Connections / if you find that the co}or on your Samsung telev sion's screen b not correct or back and white, first run a Self Screen Color Diagnosis Test on tfle TV to nsake SUre lhere are no gevJce issues.

Scn _.,nBrigiqtness Ifyou find that the colors or_ you Samsung FV are correct but iust a little too dark or brig_ t, there are some sett ngs

Jnwanted Powering off IFyour Samsung _v' appeals to turn off by tself, Lhere may be an issue wig1 ether your Timer settings or your Eco

features like the Eco Sensol or the Enelgy Saving feature. Fo}low the steps below with your remote to turn these features off or on,

Energy saving ; Menu -_ Setup _* Eco Solution -* Energy Saving -,Select Settings

Self Diagnosis : User Menu , Support , Self Diagnosis * Picture Test If the test s ok, try making sure ;

Your connections are allconsb,!ent, Per ( xarople, if you've used the AV hl jack on your TV, make sure you have

used the AV uut iack on your vdeo source Try makng sur( you have connected to the colr6_st acks. For example, if you use the Component iacl<s, labeed

Pb, Ph and Y,to connect your rv and vdeo soulce, make sure you have con! acted the blue Pb jack on the vdeo so lrce to the blue Pb jack on the rv, the red Pr jack on the source to the red Pr jack on the T_

you should check before col ins for a repair

Backlight, Contrast, Brightness, Sharpness, Color, lint (G/R) and so on Go o", ic[ure" in [he Menu anJ then try adjusting these options

triendiy No Signal Powel Off feature

Fist make sule me Seep limer is not accidentally set. The Sleep Tinier }eta you fall asleep with he TV still on

knowklg that it will turn off afler a certain perod of time and not wasle erlergy.

Sleep Timer : User Menu _ Setup _ Time _ Sleep Timer

Ifthe Sleet) imer is not activated, you may save engaged the No Signal Power 0it or Ate Powe Off feature

No Signal Power Off : User Menu Setup • Eoo Solution, No Signal Power Auto Power Off : User Menu Setup * Eco Solution * Auto Power Off

r r

lloubb Power ng On Before you turn the TV on, find the red light on the right or left bottom of your T_ Press the bower on button

Stand Assembly • If you have any trouble assembling the stand, refer to "install the Stand" in the Start Up or Stand Installa[on Guide, Cannot find a c/annel Re-run P!ug & Ray or run Auto Pr_-jram, (go to MENU - Channel - Auto Program)

The TV image does not Ic_k as good as Ityou have an analog cable'sateflite box uPgrede to a dig tai set top box. Use HDM or Component cabies to it did in the stole, deliver HD (hgh def ni[on) picture qu_/lity.

The p cture s distorted: macroblock • Compression ef video eontents may cause pcture d stortion, eepecia,y on fast moving pictures such as those n _'r_)r, STal _ccq dots, p x61izalio_l sporB and ac[ior/ moves

Color is wrong or m sslng, Iiyou're usng a component connection, make sure the component cables are connected to the correct jacks

There is poo_color or brightness, • Adjust the Picture opt ons n the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)

] here is a deed ine on the edge ot _ If the picture size is set to Screen Fit, change it to 1B:9 the seleen • Change the cable/satellite box resolution.

Ihe picture is black and white, _ If ys_ are using an AV composite input, connest the video cable (yellow) to the Green }ack of Component Input 1

When changing channels, the pictule _ If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cape box reboots, t freezes or is distorted G delayed, may Lake up to 20 minutes)

There is no sound or the sound is too Check the vdume of .he device (Cable/Sa Box DVD Blu ray etc) co nected to your T'd low at maximun/volume

)Pc picture s good, t/ut 1here is no • It you are using an external de4ce, check the device's audio output option Ex, you may need to change your sound, cable box's audio option te HDMI i the box isconnected to your [V using an HDMI cabe

The speakers are maldng an • Check the cable connections Make sure a vide, cab e isnot con 1acted to an aud o input inapp_opr ate noise . For Antenna or Cable connections, ch_K the signal information, A weak signal may cause sound distortbn

NO Picture, No Video

The rv will not urn on . Make sure [he AC power cord is securely plugged into 1he wail Gl[lel and the %/

The TV turns off automatbally.

on the TV or remote and the light should blink about 5 times before the TV turns on.

Ifyou find that you are having trouble power ng on yocr Samsung televis on, there are a number of things to check it before making a call Io the service departrnent

you _ave a cable or sateliite box, your TV may appear to be off because the cable or satellte box is not outputtng a signal re test t!e signa output el your cabke or satebte box, press the guide or irlfo butter on the caps or sateilite

box remote centlol If the sceen dsplays the guide or info data the ploblem is caused by the box

Ifthe test n]age !a prot_fly displayed, the peer pbture may be c'agsed by the source or signal

Cable/Satellite sopsclibers; Try HD channes from the channel line up Air/Cable Antenna connecLon: Try F/D channels alter r lnnhg A(to Program

_:', Many HD channels b!oadcast up scaled SD (Standard DefinJt on) content. The p cture quality of up

scaled SD content s iow

Adjust the Cable/Set top box video output resolution to I080i or 720p.

A weak signal can cause picture distortion. This s not a TV problem.

Mobile phones used close to Ihe TV (within 3.3ft) may cause noise in the picture on analog and digital channe s

Incorrect or eose connections may cause COlOr probbms or a bbnk screen

Adjust the Energy Saving option in the TV menu. (go to MNU - Setup - Eco Solution - Energy Saving )

• Try resetting Lhe picture to the default picture settings, (go to MENU Picture Picture Reset)

Orl the %/,

• Set the output resolution of the cable box to 1080i or ; 20p.

Reboot the connected device by reconn_st ng the device's power cable

= Perform the Sound Test as explained above

• Make are the wall oudet is work rig,

• ]ty pressing the POWEI_ button or] the %/to make sure he problen/s not the emote, Ifthe %/turns on r refel to 'Remote cortrol does pot work' below

-10_ oll- o12-

Tqere Js no picture!v dee Check the cable connections, (Remove and racer nect al cables connected to the tV and exteznN devices).

RF (CableiAnterma) Connection

The TV ia not reseMng at channels • Make sue the coaxial cable is cohr/_;ted securely

Ne Captiop oil digita! channe s. Check the Captien selup menu. Tly changing Caption Mode Service 1 to CC1,

The )icture is distorted: n actob ock Compresson of vkleo contents may cause picture distortion, esp_c aly on fast moving )ctures such as those in erro, sn a}! b ock, dots, pJxelzaton sports and action n/cries,

Others Pu!pb/green ruling horizontal bars and Remove the b{t and ght audo connections from the set top box If the buzzing stops, this indicates that the set

buzz ng noise from the TV speakers wit/ lop box has a grounding ssue, Replace the Comgen_lt vdeo cabbs wlh an HDMI connectbn Component cable con lection,

The picture will not dispiay in full screen

The remote control does not work • Replace the remote control's batteries Make sure you nsert them with the polar ty (+/) correct

Tie cab e/set top box remote control Program the CabS/Set top box remote control to opel ate the T\4 Refer to the Cab]er_t top box user manual for d_s noL turn the TV on or off, or adjust the SAMSUNG 7',/code,

the volume,

A "Mode Not Supported" message Check the supported resolution of the IV and adj !st the external deJce's output resolution accord ng[y. Refer to appears• resobtic¢_ sctt rigs in this manual

Caption on the W menu s greyed ouL • Yuu cannot select Caption in [he FV mer/u when watching content lrom a device connected via HDM or

T_ere Jsa plast c smell f'om the %/. • This smell s normal and will dissipate in a few days, TV Signal Strength is unava ebb in the This function is only avaHabb fo_ dig tal channe}s received tNough an Antenna / RF/Coax connection•

Self Diagnosis Test menu TV is filte_t to the dgiqt or left side• • Remove the stand base frcm the TV and reassemble t.

The Channel menu is grey o_t • he Channel nlerlu is only availabb when yoJ select the [V source,

(unavailable) Your settings are lest after 30 m nutes or • If %/s in the Store Dame node, t will reset audio and picture settings every 30 minutes. P!ease change from

eveb_ tree the Tg is turned off, Store Demo mode to Hoele Use mode _sng the Plug & Play pr_sedure. Press the 8OUA( b button to seect

You have in er nittenf _s of nude or Check the cable connectbns and reconnect them video, Loss of audio or video carl be caused by using overly rigid or thick cab}as, Make sue the cables are flex ble

You see small parficles when you Iox)k _ This is part,of the preduct's desige and is not a defect close y at the edge o[ the frame of

the IV,

on the screen

'%._This TFT LED panel uses a panel consistin 9 of sub pixels whicn require sophisticated technology to produce• However. there may

be a few bright or dark. pixels on the screen These pixels will have no impact on the performance of the product

Set your external device's (Cable!Sat Box, DVD, Blu ray etc) video outputs to match the connections to the ]V input• For example, t an extema} device's output [s I_DML it should be connected to an IDM ioput on the rM

Make sure you_ connected devices are powered on Be sure to select the correct input source by press ng the SOU_ CE button on the _emote control. Reboot the conn_sted device by reconnecting the device's power cable.

Run Auto Program to add available channe to the chapnel ist. gotoM NU Channel - Auto program then select Auto and make sure fhe corrc, ct Cabs [V signal type is set in the menu There are 3 options, (STD, HRC and IRC)

Vedfy the antenna is positioned corr_astly.

Some channeb may not have cap[ic,q data,

A weak signal can cause picture d stortion, 1 hs is not a 7V problem,

• Clean the transm ssion window located on the top of the remote co,trot fty pointing !he ren/o_e directly at the '_V from 5B fcet away,

Component. Caption must be activated or' the exiernal device,

TV rlode, go to MEN} _ Setup _ Plug & Play _ ENTER {9,

enough for long term use, if mounting the TV to the wall, we recommend using cables with 90 d._gr_ connuY;tors.

• Sebct Home Use under Plug & Ray mode, Fo details, lefer to Plug & Play (In tial Setup),POP _W's intemai banner ad) appears

t_ Watch these troubleshooting on video at www sams _ng.com/spsn %, Some functions and p ctures shown in this manua} are available on specif c models only. _!?,You can keep your FV n optimum cond t on by upgrading it with the latest firmware from the Samsung web site (samsung.com

Support , Downloads). To upgrade, download the fl mware to your computer, copy the f rmware fie to a USB memory stick.

insert the USB memory stick into the V's USB slot, and then select Support > Software Upgrade in the TV's menu.

.Stg..r_a_geand Maintenance

R', I a sticker was attached to the lV screen, some debris carl remain after you remove the st cker Please clean it beore watching

the TV

_x 1he exterior and screen of the product can get scratched during c eaning Be sure to wipe the exterior and screen carefully using

a soft cloth to prevent scratches.

DO not spray wa_ei direG_[y onto th_ product, Ariy (iquid ha{ goea into the

Prdduct may cause a failure,_ire,or electric shock.

License

DivX Certified@ to play DivX@ video up to HD 1080p, including premium content.

ABOUT DI\£XVIDe: DivX@ is a digta vkeo format created by DvX, LLC a subs dbry of Rovi Corporation This is an official DNX Certified@ devce that/as passea/igorous testing to verily that it plays DivX video Visit

DIVe.

divx. corn for more informatior and software tools to convert youl files into DivX videos.

ABOU1 DIVX VIDEO ON-DEMAND: This DvX Certified@ device must be rag stared in order [o play purchased

DvX Video-on-Demand (VOD) movies• Io obtair your 99 stration code, locate the DNX VOD section in your device setup me'/u Go to vod.divx.com tot more informatior, oil how to complete your rag stration.

DvX@, DivXCart fed@ and associated loges are trademarks of Rovi Corpo at on or ts subsidiaries and are used under license.

Covered by one or more of the following US patents: 7,295,673; 7,460,668; 7,515,710; Z,5!9,274

_l DOLBy. Manufactured under license trem Dolby Laboratories, Dolby and the double-D symbol are trademarks of Doby

DIGITAL PLU_ [ aboratories

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,

2,0 Channel of DTS, inc. @ DiS, [nc, All Rghts Reserved.

Studio Suund 7.907/36 and 7,764,802 DTS, the Symbol, and DTS and the Symbol together are rag stared trademarks &

_-.i Theterms,OMIat'0HBMINghDefinit,o ,MuItimede,nertace,anobe,OMI ogot,a0en' ,ksor

the Symbol, & DTS and the Symbol together are registered trademarks and DTS 2.0 Channel is a trademark

Manufactured under a cense from U.S. Patent No's: 6,285,767, 8,027477, 5,319,/13, 5,333,201, 5,638,452, 5,77! ,295, 5,970,152, 5,9! 2,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474,

D]S Studio Sound is a trademark of DTS, Inc. @2012 DTS, Inc AI Rights Reserved

[]

reg stered trademarks of HDMI Lcensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in t_s product car/be tourld on the following webpage. (http://operlsourcesamsungcom) Opep So_ rce License Notice s w'itten ony English.

To send inquiries and requests tot questbns residing open sources, cent 8_:t Sanisung via EmN (oss reques:@samsung corn) [] This product uses some software programs which are distributed under the Independent JPEG Group.

ICL icense - [CU 1 81 apd bler COPYRIGHT AND PERMISSION NOTCE Copyright {c) i9ge-2008 Int_4n_tienal B _siness Much nes Corpcxalion and others All rgh% reserved

Pem'@sbn is hereby granted free d charge to any person obtaining a copy oftlb software and assGNated documentalion files/the 'Software") to deal n the Software wilhout re,strict on ncluding without limitation 1herights to use copy, i iodFy i/ergo, p &Jish, dis[nbute, andA_ sell copies d [he Soflw_u, and [o permit persons to whom 1he Salt ware s furnished to do so provided that the abx)ve copyright nctice(s) ned ths perm{ssion notce appear in allcopes d 1he So[lware and g,al bcth the above copyr ght notice(s) and this permissiol_ notice appear n suppo_bg dccumentafbn,

111 SO WARE IS PROVIDED 'AS IS' WITltOU] WARRAN]h' OF ANY KIND, EXPRESS CR IMPLIED INCLUDING BUT lUO1 LIIVIITEDIO TRE WARRANllES OF ME _CHANTABILI v FITNESS FOR AF_ ?]'ICUu_I:I PURPOSE AND NONINFR NGEMENT OF tHiRD _'ARY IIlGHTS N NO EVENT SHALL THE COl:YRIGHT HOLDER OR EIOLDEqS INCLUDED IN THIS NC-iCE BE LIABLE EOR ANY CLAIM OR ANY SPECIAL INDIRECT OR CONSEQUENT AL DAMAGES, OR ANY DAMAQES WHATSOEVER RESDLTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TOqT!OUS AC [tON ARISING OUT OF OR INCONNEC rlON WITH PIE USE OR PERFORMANCE OF THIS SOF' WARE

Except as cordoned in this notice the name d a copyrig qtiqo der shall nor be used in advertising or otherwbe 1o p_emote the sa!e, use or other dealings in this Software without prior writlen authorizalier_ of the copyright holder

All trademaks and reg stared tladelnaq<s inent cried herein ale the property of their lespective ownels

dampened wth in a small amoun_ ot water. DO n_t use a f/amrnabe liquid (e;9, benz_ne, _hinnBrs)0fs _ba0in8

@p_fa!ing tem_ratui _ 0Petering Hqlu!d@ Storage _ernperat_re

storage Humidity

50F to 104F (10°C to 40C) 10% to 80%, non condensing

-4F to 113F (-_®C to 45C) 5% to 95%, non condensing

::i

Display Res01u_bn

8_m_n Size 40" Class (Diagon_.q) (40.0 i' measL red dagonally)

Outpui

35,9 x 21,5 x 3,e nches

(914,2 x 547,9 x 90•9 (ram))

359 x 23,0 x 77 riches

(914,2 x 586,4 x 196,4 (ram))

W_hout etand 15 4 Ibs (70 Ks) With _and i 6F Ibs (76 Kg)

s%_ Desgn and specificatbns are subject to change without prior notce _.,, This devce is a Class B digita apparatus

%, For information about the power required and more about power consumption, refer to the label attached to the product. % Typical power consumption is measured according to Energy Star Program requirements for televs ons

_!, Dispose unwanted electron cs thro Jgh an aBoroved recycier. R_ find the nearest recycling ocation, go to our website: www.

sarr'sung com/recyclingdirect or ca}. (877} 278 0799.

JACK PANEL DETAIL / REAR VIEW

NOI E: All draw ngs are not necessarily to scale. Some dimensions are subject to change wthout prior notice Refer to the dimensions pror to performing installation of youI 1V. Not lesbons bb for typographicai or pnnted e rots,

@ 2014 Samsung Electlonies _Tler ca, Inc

i96e x 768

10Wx2

48u Class

(4_ 8" measured diagonally)

42,e x 25,1 x 3,5 inches

(1083.2 x 637,8 x 90,9 (ram))

42.6 x 26,6 x 8,0 inches

(1088.2 x 677.0 x 203.9 (ram)}

200 Ibs (9•i Kg)

21.8 ]bs (9•9 Kg)

(Unit; inches)

I I I

[UII,Ig05-ZA]I}N68 05829h-00ENG,h'_db 2 R_ _ 20Pi 06-25 r_3:15:17