Samsung UN60F8000AF, UN46F8000AF, UN55F8000AF User Manual
Welcome to your new Smart TV!
QUICK START
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
GUIDE
BN68-05037A-01
Included in this box
Remote Control Stand Parts and Cables
x 2
Attach the TV to
the Stand
Step
Step 1 Attach the TV to the Stand
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Connect video
devices
Step
2
Insert the
batteries into the
remote control
Step
Open the package, and take the cushioning out
of it.
3
Power on and
start the initial
setup
Step
4
1
Smart Touch Control Screw Cover Power inlet cover Cable clip
Batteries (AAA x 2) Wall mount adapter TV holder kit Power cord
RCA Adapter x 2 Component adapter IR extender
Also included: User manual, regulatory guide, 3D Active Glasses
x 2
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
5
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
Put a base, legs and screws off to assemble the
stand out of the box.
2
Base Screws
3
L
R
x 2
Leg
Fit the base and legs together, making sure that
the legs are firmly aligned with the base. See the
diagram below.
x 8
6
7
x4 (M4 X L12)
Holding the stand parallel to the screen, slide the
stand legs into the notches on the back of the TV.
Insert 4 screws and secure the stand to the TV.
4
x4 (M4 X L12)
Insert 2 screws through the base into each leg as
shown, and then secure the legs to the base with
a screwdriver.
8
When placing the product on a console or shelf,
make sure that the stand does not protrude
out of the console or shelf. This may cause the
product to fall off and result in a malfunction or
injury.
Connect the IR extender to the IR
Out port to control external devices
connected to the TV using the Smart
Touch Control. For more detailed
information, refer to the "Universal
Step 2 Connect video devices
We suggest using HDMI connections whenever possible for the best picture quality. Use the included AV adapter to connect older devices.
The displayed image may differ depending on the model.
Remove the Connection Cover
USB Connections
You can connect USB storage devices
to the USB jacks and enjoy personal
photos, videos, and music.
You can connect home theater
systems to the OPTICAL or AUDIO
OUT ports.
Best Connection : HDMI
HDMI Cable
USB
(5V 0.5A)
USB
(5V 0.5A)
USB
(HDD 5V 1A)
DIGITAL
AUDIO OUT
(OPTICAL)
Power Input
The AUDIO OUT port can connect
to a speaker.
Good Connection : Component and AV
Match the colors on your device's cables to the
colors on the jacks. Connect the yellow composite
video out connector from an AV device to the
yellow AV IN jack.
We suggest using HDMI whenever
possible.
HDMI 1 is the default port for a
HDMI Port
cable or satellite set-top box.
Use the other ports for Blu-ray
players, game consoles, and other
devices.
Connect the IR extender to the IR
Out port to control external devices
connected to the TV using the Smart
Touch Control. For more detailed
information, refer to the "Universal
Remote Control Setup" section on the
User manual.
Step 3 Insert the batteries into the remote control
To open, put your plastic card into the notch.
AUDIO
OUT
EX-LINK
HDMI IN 4
(MHL)
IR OUT
Wired Ethernet
Component
HDMI IN 1
(STB)
HDMI IN 2
(DVI)
HDMI IN 3
(ARC)
AV
LAN
ANT IN
AIR/CABLE
Connect the cable from the
antenna or cable TV outlet.
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and
jacks are shown below.
Cable Plugs Ports / Jacks
Step 4 Power on and start the initial setup
Information required:
• Wi-Fi network password (if you use one)
• Zip code
• Cable or satellite provider info
The TV must be connected to the Internet to use the Smart Features. If you have a wireless
network, we recommend that you confirm that your network router is switched on and working
before you start the initial setup. If you have a wired network, we recommend that you connect
the TV to the network with a CAT 7 cable before you begin.
Power on to start the initial setup.
HDMI
USB
Do not plug cables in upside down.
Optical
Troubleshooting
Warning
Be sure to check the orientation of
the plug before plugging it in.
The stand is wobbly or crooked
Make sure the arrows on the stand are properly aligned.
The TV won’t turn on
Make sure all cables are fully inserted, and that the remote has batteries installed.
My remote, gesture, or voice controls don't work
The TV ships with protective stickers covering some of the sensors. Make sure all of them have
been removed.
I don’t know where to plug in <device>
Devices without HDMI may require the included A/V adapter.
Connect to your network (wired or wireless)
Search for channels from
your TV service provider
or
After you have finished the initial setup, you can configure the universal remote control settings.
These settings let the Smart Touch remote control external devices connected to the TV, such as a
set-top box or Blu-ray player.
Congratulations on your new Smart TV!
I have extra parts
The TV includes some optional parts to help with wall mounting and cable routing.
If you experience issues, please do not take the TV back
to the store.
\
In the United States of America, call us at
1-800-SAMSUNG (1-800-726-7864) or visit us at www.
samsung.com/spsn for support and warranty service.
For other countries, refer to "Contact SAMSUNG
WORLDWIDE" in the user guide.
Loading...