Samsung UN46F5500AF, UN40F5500AF, UN32F5500AF User Manual

Welcome to your new Smart TV!
QUICK START
The following instructions cover assembling, connecting, and setting up your new TV. Make sure you have the accessories listed below.
GUIDE
BN68-05028A-00
Included in this box
Remote Control Stand Parts and Cables
Attach the TV to the Stand
Step
Step 1 Attach the TV to the Stand
1
Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV by the edges, as shown.
Connect video devices
Step
2
Insert the batteries into the remote control
Step
Cable manager Stand Mount
Power on and start the initial setup
3
Step
4
Also included:
Remote Control
Batteries (AAA x 2) Wall mount adapter
(46 inch and above models)
User Manual, Regulatory Guide
IR extender
x 2
Power cord
Lay the TV on a soft surface, screen side down. Use the packing material to protect the screen.
1
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV (such as the box).
4
5
Insert 4 screws and secure the stand to the mount.
x4 (M4 X L12)
Holding the stand parallel to the screen, slide the stand into the notches on the back of the TV.
2
3
Base Screws
Put a base and screws off to assemble the stand out of the box.
Screws
32 inch models: 7 pieces
40 inch and above models: 8 pieces
Fit the stand and mount together, making sure the notch on the mount aligns with the stand.
1 2 3
6
Insert 4 screws and secure the stand to the TV.
x3 (M4 X L12) 32”
x4 (M4 X L12) 39” ~ 55”
AIR/CABLE
Connect the IR extender to the IR
Out port to control external devices
connected to the TV using the Smart
Touch Control. For more detailed
information, refer to the "Universal
Step 2 Connect video devices
We suggest using HDMI connections whenever possible for the best picture quality.
The displayed image may differ depending on the model.
USB Connections
You can connect USB storage devices
to the USB jacks and enjoy personal photos, videos, and music.
USB
(HDD 5V 1A)
Power Input
Best Connection : HDMI
We suggest using HDMI whenever possible.
HDMI 1 is the default port for a cable or satellite set-top box.
Use the other ports for Blu-ray players, game consoles, and other devices.
Connect the cable from the antenna or cable TV outlet.
Connect the IR extender to the IR Out port to control external devices connected to the TV using the Smart Touch Control. For more detailed information, refer to the "Universal Remote Control Setup" section on the User manual.
HDMI Cable
HDMI Port
USB
(TV CAMERA)
HDMI IN 2
HDMI IN 1
(STB)
ANT IN
AIR/CABLE
HDMI IN 3
(DVI)
IR OUT
AUDIO OUT
Wired Ethernet
COMPONENT
/ AV IN
LAN
VIDEO
DIGITAL
AUDIO OUT
(OPTICAL)
You can connect home theater systems to the OPTICAL or AUDIO OUT ports.
EX-LINK
AUDIO
Good Connection : Component and AV
Match the colors on your device's cables to the colors on the jacks. Connect the yellow composite video out connector from an AV device to the green AV IN jack.
AV also accepts component video connections (red/green/blue).
+
The AUDIO OUT port can connect to a speaker.
Step 3 Insert the batteries into the remote control
1
2
Step 4 Power on and start the initial setup
Information required:
Wi-Fi network password (if you use one)
Zip code
Cable or satellite provider info
The TV must be connected to the Internet to use the Smart Features. If you have a wireless network, we recommend that you confirm that your network router is switched on and working before you start the initial setup. If you have a wired network, we recommend that you connect the TV to the network with a CAT 7 cable before you begin.
Power on to start the initial setup.
3
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.
HDMI
USB
Cable Plugs Ports / Jacks
Do not plug cables in upside down.
Optical
Troubleshooting
Warning
Be sure to check the orientation of the plug before plugging it in.
The stand is wobbly or crooked
Make sure the arrows on the stand are properly aligned.
The TV won’t turn on
Make sure all cables are fully inserted, and that the remote has batteries installed.
My remote, gesture, or voice controls don't work
The TV ships with protective stickers covering some of the sensors. Make sure all of them have been removed.
I have extra parts
The TV includes some optional parts to help with wall mounting and cable routing.
Connect to your network (wired or wireless)
Search for channels from your TV service provider
or
After you have finished the initial setup, you can configure the universal remote control settings. These settings let the Smart Touch remote control external devices connected to the TV, such as a set-top box or Blu-ray player.
Congratulations on your new Smart TV!
If you experience issues, please do not take the TV back to the store.
In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www. samsung.com/spsn for support and warranty service.
For other countries, refer to "Contact SAMSUNG WORLDWIDE" in the user guide.
\
Loading...