Samsung UH26EH4000, UH26EH4050, UH32EH4000, UH32EH4050, UH32EH5000 User Manual

...

LED TV

user manual

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non- expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats you use for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement,

the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center.

Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

–– In the United States : 1-800-SAMSUNG (1-800-726-7864) –– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, TV shows or movies in panorama or 4:3 format, stock or news scroll bars, etc.) on the screen. The constant display of still pictures can cause ghosting or image burn-in (image retention) on the LED screen, which will affect image quality. To reduce the risk of this effect, please follow the recommendations below:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image in full screen mode. Use the TV's Picture Options menu to select the optimal screen size.

• Reduce brightness and contrast values to the minimum required to achieve the desired picture quality. Values that exceed the minimum may speed up the burn-in process.

• Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to proper user manual section for details.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country CANADA U.S.A.

Samsung Electronics

Address

Customer Care



Center

Web Site www.samsung.com

Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

1-800-SAMSUNG(726-7864)

Samsung Electronics America, Inc. 85 Challenger Road Ridgeﬁeld Park, NJ 07660-2112

BN68-04499A-00

- 1 -

The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various Tools menus. The Main menu gives you access to most or all of the menu options available on your TV. The Tools menus display a selected number of frequently used menu options that change depending on the screen you are viewing. A Tools menu symbol (*) in the lower right side of the screen indicates that a Tools menu is available.

The Main menu has seven primary categories:

y Picture y Input

y Sound y Application

y Channel y Support

y Setup

To view the Main menu, press the MENU button on your remote. To view a Tools menu, press the

✎

The menu options that appear in the Main menu depend on the Source you have selected. For example, if you have selected the HDMI source, the Channel category will not appear. To see the Channel category, you must first select TV in the Source List.

The Menu options are presented below, arranged by Main menu categories. A Tools button symbol

name indicates the option is also available in one of the Tools menus.

TOOLS button on your remote.

(

Picture Menu

Mode

Select your preferred picture mode.

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

✎

When your TV is connected to a PC, you can only select Entertain and Standard

=■

Dynamic: Brightens the screen. Suitable for a bright room.

=■

Standard: Suitable for a normal.

=■

Movie: Darkens the screen, making it less glary. Suitable for watching movies in a darkened room.

=■

Entertain: Sharpens the picture. Suitable for games.

✎

Only available when the TV is connected to a PC.

=■

Backlight: Adjusts the brightness of the screen by adjusting the brightness of the individual pixels.

=■

Contrast: Increases or decreases the contrast between dark and light areas of the picture.

=■

Brightness: Adjusts the brightness of the screen. Not as effective as Backlight.

=■

Sharpness: Sharpens or dulls the edges of objects.

=■

Color: Adjusts the color saturation. The higher the Color setting, the more intense the color. Low settings remove color and the picture becomes black, white and gray.

=■

Tint: Adjusts the amount of green and red in the picture. As you increase the amount of green, the amount of red decreases and vice versa.

✎

When the TV is connected to a PC, you can only make changes to Backlight, Contrast, Brightness, and

Sharpness.

)

next to an option

Advanced Settings

Available in Standard and Movie mode only.

Compared to previous models, new Samsung TVs offer a more precise picture with more precise controls.

✎

When your TV is connected to a PC, you can only make changes to Gamma and White Balance.

=■

Color Space (Auto / Native): Auto automatically matches the range of colors available to create pictures to the color range of the video source. Native provides a color range wider than the color range of the video source.

=■

White Balance: Adjusts the color temperature of the picture so that white objects look white (instead of, for example, slightly pink or slightly yellow) and the overall color of the picture looks natural.

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue) brightness.

Reset: Resets the White Balance to it’s default settings.

=■

Gamma: Adjusts the primary color intensity.

=■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast.

=■

Black Tone (Off / Dark / Darker / Darkest): Selects the black level to adjust the screen depth. Darker settings make blacks look darker.

=■

Flesh Tone: Adjusts the amount of red in skin tones.

=■

Motion Lighting (Off / On): When on, the TV automatically adjusts the brightness of the screen in response to the brightness of the room. In bright light, the screen brightens. In dim light, the screen dims.

✎

Available in Standard mode only.

Picture Options

When the TV is connected to a PC, you can only make

✎

changes to the Color Tone, Size and HDMI Black Level.

=■

Color Tone (Cool / Standard / Warm1 / Warm2): Cool makes the picture bluer (cooler). Warm 1 and Warm 2 make the picture redder (warmer).

✎

Warm1 and Warm2 are deactivated when the picture mode is set to Dynamic.

=■

Size: Set the size and aspect ratio of the picture on the screen. Your cable box or satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use the TVs 16:9 mode most of the time.

16:9: Sets the picture to the 16:9 wide screen format. Zoom1: Provides moderate magniﬁcation of the picture. Sides,

top, and bottom are cut off. Zoom2: Provides larger magniﬁcation of the picture. Sides, top,

and bottom are cut off. Wide Fit: Enlarges the aspect ratio of the picture so the picture

ﬁts the entire screen. 4:3: Sets the picture to the old, 4:3 format and puts black or gray

borders on the right and left of the picture.

✎

Do not watch your TV in the 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which is not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when your TV is inputting HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) HD signals.

✎

HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p (1920x1080) or 720p (1280x720) resolution.

✎

You can adjust and store settings for each external device you have connected to an input on the TV. Picture Sizes available by Input Source are listed below:

- 2 -

Input Source Picture Size

ATV, AV, Component (480i, 480p)

DTV (1080i, 1080p), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)

=■

Digital Noise Filter (Off / Low / Medium / High / Auto) : If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

✎

When the signal is weak, try all the Digital Noise Filter options until the TV displays the best picture.

=■

HDMI Black Level (Normal / Low) : For HDMI signals, select the black level to adjust the screen depth. Low make blacks look darker.

✎

Available only in HDMI mode (RGB signals).

=■

Film Mode (Off / Auto) : Sets the TV to automatically sense and process ﬁlm signals from all sources and adjusts the picture for optimum quality.

✎

Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

=■

LED Motion Plus (Off / On): Removes drag from fast scenes with a lot of movement to provide a clear picture.

16:9, Zoom1, Zoom2, 4:3

16:9, Wide Fit, 4:3, Screen Fit

Picture Reset

=■

Picture Reset (Reset Picture Mode/Cancel): Resets the picture settings to their factory defaults.

Sound Menu

Mode

Equalizer

Available in Standard sound mode only.

SRS TruSurround HD (On/Off)

Available in Standard sound mode only.

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content through two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

=■

Standard: Selects the normal sound mode.

=■

Music: Emphasizes music over voices.

=■

Movie: Provides the best sound for movies.

=■

Clear Voice: Emphasizes voices over other sounds.

=■

Amplify: Increase the intensity of high-frequency sounds to allow a better listening experience for the hearing impaired.

=■

Balance L/R: Adjusts the balance between the right and left speaker.

=■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the loudness of speciﬁc bandwidth frequencies.

=■

Reset: Resets the equalizer to its default settings.

Multi-Track Sound (MTS)

Analog channels only.

=■

Mono: Select for channels that are broadcasting in mono or if you are having difﬁculty receiving a stereo signal.

=■

Stereo: Select for channels that are broadcasting in stereo.

=■

SAP: Select to listen to the Separate Audio Program, which is usually a foreign-language translation.

✎

Depending on the program being broadcast, you can listen to Mono, Stereo or SAP.

Auto Volume

Because each station has its own broadcasting conditions, the volume may ﬂuctuate each time you change the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater.

=■

Audio Format (PCM/Dolby Digital): You can select the Digital Audio output (SPDIF) format. The available Digital Audio output format may differ depending on the input source.

✎

By connecting the TV to a receiver or home theater with

Dolby Digital and 5.1ch speakers and selecting Dolby Digital, you can maximize your interactive 3D sound

experience.

=■

Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press

ENTER when done (0ms ~ 250ms).

Speaker Settings

=■

Speaker Select (External Speaker / TV Speaker)

If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.

✎

When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You will hear sound through the external speakers only. When you set Speaker Select to TV Speaker both the TV’s speakers and the external speakers are on. You will hear sound through both.

✎

When Speaker Select is set to External Speaker, the

VOLUME and MUTE buttons will not operate and the

sound settings will be limited.

✎

If there is no video signal, both the T V’s speakers and the external speakers will be mute.

Sound Reset

=■

Reset All: Resets all sound settings to the factory defaults.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks simultaneously (for example, simultaneous translations of a program into foreign languages).

✎

You can only select a language from among the ones being broadcast.

- 3 -

Channel Menu

T Memorizing Channels

When you ﬁrst set up your TV using Plug & Play, the TV memorized the channels that were available over the air or through your cable system and added them to the Channel List. The Antenna and Auto program functions described below let you re-run the channel memorization function without having to re-run the Plug & Play procedure.

Antenna (Air / Cable)

Before your television can memorize the available channels, you must select your TV's signal source, Air (using an antenna) or Cable. Select Menu >Channel > Antenna > Air or Cable. After you have selected the signal source, go on to the Auto Program function.

✎

Selecting the signal source using the Antenna function also determines the signal source the TV is tuned to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture.

Auto Program

The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List.

To start Auto Program, follow these steps:

1. Push

2. On the Antenna Source screen, select the source of your TV

3. On the Cable Type screen, use the ŻŹŸź buttons to select

Clear Scrambled Channel

This function ﬁlters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

MENU3 ĺ Channel ĺ Auto Program ĺ ENTER on

your remote. The Antenna Source screen appears.

signal.

Air If your TV is connected to an antenna choose Air, and then press

ENTER. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose Cable, and then press

ENTER. Go to Step 3.

Auto If you choose Auto, and then press

ENTER



, the TV will automatically select the correct Antenna source. Go to Step 3.

the type of digital and analog cable systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select Start, and then press channels.

✎

Channel memorization can take up to 45 minutes, depending on your cable system.

✎

Memorized channels are added to the Added Channels list. These are the channels you will see when you use the Channel buttons on your remote.

✎

Press the ENTER button to stop the Clear Scrambled Channel.

✎

This function is only available in Cable mode.

ENTER. The TV will start memorizing

T Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels you've scheduled for viewing. Add or delete Favorite channels, add or delete channels from the Added Channels list, schedule channels or programs for viewing. Watch a channel by selecting the channel in the All Channels, Added Channels, or Favorite screen, pressing the Ÿ / ź buttons, and then pressing the

$GGHG&KDQQHOV

 $LU =RRP6HOHFW%7RROVŹ1H[W3URJUDP

Channel List Screens icons are listed on the left side. Select an icon using the Ÿź buttons to view each list.

=■

channels that appear when you press the CH button.

=■  =■

 $LU  Ɔ79

 Ɔ79

 $LU  $LU  Ɔ79  $LU  Ɔ79  Ɔ79

All Channels: Shows all currently available channels including

those you deleted from the Added Channels list.

Added Channels: Shows all Added Channels. These are the

Favorite: Shows all favorite channels. Programmed: Shows all channels and programs currently

scheduled using Timer Viewing.

✎

Remote control buttons active on the Channel List screen.

x Green (Zoom): Enlarges or shrinks a channel number. x Yellow (Select): Move the cursor to a channel. Press the Yellow

button to select the channel. A additional channels. Then, open the Tools menu and apply a function to the channels you selected.

(To o l s): Displays the Channel List Too l s menu. (The Tools

menus may differ depending on the situation.)

Display Icons Used in the Channel List Screens

Icons Meaning







A selected channel.

A Favorite channel.

A reserved program.

A program currently being broadcast.

T The Channel List Tools Menu

The Channel List Tools menu contains most of the functions you can use on the screens. To view, select a list screen, select a channel, and then press the

Add / Delete: Delete a channel from or add a channel to the

=■

Added Channels list.

To delete channels from the Added Channels list, follow these steps:

1. Select one or more channels in the Added Channels list using

the Ÿź buttons and the Yellow Select button on your remote.

2. Press the

appears.

3. Select Delete in the Tools menu, and then press the

button.

All Channel, Added Channels

TOOLS

button.

TOOLS button on your remote. The Tools menu

ENTER button.

mark appears. Repeat to select

, and

Favorite List

ENTER

- 4 -

To add channels to the Added Channels list, follow these steps:

1. Select one or more channels in the All Channels list using the

Ÿź buttons and the Yellow Select button on your remote.

2. Press the

TOOLS button on your remote. The Tools menu

appears.

3. Select Add in the Tools menu, and then press the

ENTER

button.

✎

All deleted channels will be shown on the All Channels list. You add channels back to the Added Channels list on the All Channels list.

✎

A gray-colored channel indicates the channel has been deleted from the Added Channels list.

✎

The Add menu option only appears for deleted channels.

=■

Add to Favorite/Delete from Favorite: Lets you add channels to and delete channels from your Favorites list.

To add channels to the Favorites list, follow these steps:

1. Select one or more channels in the All Channels list using the

Ÿź buttons and the Yellow Select button on your remote.

2. Press the

TOOLS button on your remote. The Tools menu

appears.

3. Select Add to Favorite in the Tools menu, and then press the

ENTER button.

To delete channels from the Favorites list, follow these steps:

1. Select one or more channels in the Favorite Channels list

using the Ÿź buttons and the Yellow Select button on your remote.

2. Press the

TOOLS button on your remote. The Tools menu

appears.

3. Select Delete from Favorite in the Tools menu, and then

press the

=■

Timer Viewing: You can schedule a channel to be displayed

ENTER button.

automatically at a set time, even when you are watching another channel. You must set the current time ﬁrst in the Time > Clock function to use Time Viewing.

To schedule a channel, follow these steps:

1. Select a channel in the Added Channels list using the Ÿź

buttons and the Yellow Select button on your remote.

2. Press the

TOOLS button on your remote. The Tools menu

appears.

3. Select Time Viewing in the Tools menu, and then press the

ENTER button. The Time Viewing screen appears.

Timer Viewing

Antenna Channel Repeat

DTV Air 6-1 Once

Date Start Time

01-01-2012 12 : 01 am

=

Move

Adjust

=

Enter $=Return

4. Use the ŻŹ buttons to move from entry ﬁeld to entry ﬁeld and the Ÿź

buttons to change the entries. Where numbers are displayed, you can also enter numbers directly using the number keypad on your remote.

✎

If you select Everyday or Every Week, the date you select in the Date field becomes the start date for your scheduled viewing. For Everyday, the TV will turn on every day, at the time you selected, starting from that date. For Everyweek, the TV will turn on every week, on the same day of the week as the start date you selected, at the time you selected, from that day on. If you select Once, the TV will turn on once, on the date and time you selected.

5. Press the

✎

Only Added Channels can be scheduled.

✎

Scheduled programs and channels are displayed in the

ENTER button on your remote when done.

Programmed List.

✎

When you select a digital channel, press the Ź button to view the digital program list. If you highlight a program in the list, and then press the

ENTER(Schedule) button,

you set Timer Viewing for that program directly.

=■

Select All: Select all the channels in the displayed channel list.

=■

Deselect All: Deselect all the selected displayed channels.

✎

You can only select Deselect All when one or more channels are selected.

=■

Channel Name Edit: Analog channels only. Lets you assign a name of up to ﬁve characters to an analog channel. For example, Hist, Food, Golf, etc. This makes it easier to ﬁnd and select a channel .

=■

Auto Program: See Auto Program under Memorizing Channels.

Programmed List (on the Channel List Screen)

The Programmed list displays the channels and programs you have scheduled for viewing using the Time Viewing function. You can view, modify, or delete a show you have scheduled using the functions on the Programmed List screen Tools menu.

Programmed List Screen Tools Menu

=■

Change Info: Change the scheduling information for a show or channel you have scheduled.

To change the information, follow these steps:

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the

2. On the Programmed List screen, select the show or channel entry you want to change, and then press the The Tools Menu appears.

3. Select Change Info, and then press the The Time Viewing screen appears.

4. Use the ŻŹ buttons to move from entry ﬁeld to entry ﬁeld and the Ÿź are displayed, you can also enter numbers directly using the number keypad on your remote.

5. Press the

=■

Cancel Schedules: Cancel a show or channel you have scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the

2. On the Programmed List screen, select the show or channel entry you want to cancel, and then press the The Tools Menu appears.

3. Select Cancel Schedules, and then press the button. The Cancel Schedule screen appears.

4. Select OK, and then press the

buttons to change the entries. Where numbers

ENTER button when done.

ENTER button.

TOOLS button.

ENTER button.

TOOLS button.

ENTER

- 5 -

=■

Information: Display the information for a show or channel you have scheduled. You can also change the schedule Information.

1. Select the Programmed List icon on the left side of the Channel List screen, and then press the

2. On the Programmed List screen, select the show or channel entry you want information for, and then press the button. The Tools Menu appears.

3. Select Information, and then press the The Time Viewing Information screen appears.

4. Select Change Info and press the to change information, or select Close and press the

ENTER button to close the Information screen.

=■

Select All / Deselect All: You can select or deselect all channels in the channel list.

ENTER button.

TOOLS

ENTER button.

ENTER button

T Other Channel Menu Functions

Channel Mode (Added Channels/Favorite Channels)

Lets you select the channel list displayed when you press the CH! (Channel) button on your remote. For example, if you select Favorite Channels, you will only see Favorite channels when you press the CH! button.

Fine Tune

Analog channels only.

If the reception is clear, you do not have to ﬁne tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, ﬁne tune the channel manually.

✎

Select the channel, and then select Fine Tune.

✎

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.

✎

To reset fine-tuning, select the channel, select Fine Tune, and then select Reset on the Fine Tune screen.

Setup Menu

Plug & Play

Lets you re-run the Plug & Play initial setup procedure. For instructions, see your Quick Start Guide.

Language

Set the menu language.

✎

Choose between English, Español, and Français.

T Setting the Time

Time

✎

The time you set will appear when you press the INFO button.

=■

Clock: Set the clock so you can use the various timer features of the TV.

✎

If you disconnect the power cord, you have to set the clock again.

To set the clock, follow these steps:

1. Select Setup >Time > Clock.

2. Press

=■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

ENTER and select Auto or Manual, and then press

ENTER again.

If you selected Auto:

The TV will automatically download the correct time from a digital channel.

• Select Time Zone, and then press the Use theŸź buttons to select your Time Zone, and then

ENTER.

press

• Select DST (Daylight Savings Time), and then press

ENTER. Select On if you want to turn the DST

adjustment on and off manually. Select Off to turn off the DST adjustment. Select Auto if you want the TV to adjust to DST automatically. Press

✎

DST and Time Zone function are only available when the Clock Mode is set to Auto.

If you selected Manual:

The Clock Set screen appears. Use the Ÿź buttons to change the values in each ﬁeld or use the number buttons to enter the values directly. Use the ŻŹ buttons to move from ﬁeld to ﬁeld. When done with all the ﬁelds, press

✎

Available only when Clock Mode is set to Manual.

✎

To cancel the Sleep Timer, select Off.

ENTER when done.

ENTER button.

ENTER.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you select. You can set three different on/off timer settings.

✎

You must set the clock first.

=■

On Time / Off Time: Set the hour, minute, am/pm, and Activate/Inactivate ﬁelds for the On Time and Off Time. Use the ŻŹ buttons to move from ﬁeld to ﬁeld. Use the Ÿź buttons to change the values in each ﬁeld. To activate the timer with the setting you have chosen, set the Activate/Inactivate ﬁeld to Activate.

=■

Volume: Set the desired loudness.

=■

Contents: To select what will be turned on when the timer setting is activated. You can set the TV to turn on a speciﬁc channel or play back contents such as photo or audio ﬁles.

Use the ŻŹ buttons to move to move to the Contents ﬁeld, and then press the appears. Use the ŻŹ buttons to move from ﬁeld to ﬁeld. Use the Ÿź buttons to change the values in each ﬁeld.

- TV/USB: Select TV or USB. The USB device must be

connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

- Channel: If you have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) ﬁles on the USB device:

✎

The maximum displayed number of files, including sub folders, in one folder of USB storage device is 2000.

✎

The media may not be playing smoothly when using the device lower than USB 2.0.

1. Use the ŻŹ buttons to move to the ﬁeld under Music or the ﬁeld under Photo, and then press the button. The TV displays a single folder (the Root folder) and the type or name of the device.

ENTER button. The Contents screen

ENTER

- 6 -

1. Press the ENTER button. A list of folders on the device

appears.

✎

If there are no folders on your device, press the Yellow select button to select the Root folder, and then press the re-appears.

2. Use the Ÿź buttons to highlight a folder that contains

music or photos, and then press the Yellow select button to select the folder.

3. Press the

=■

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can select the days you want to activate the timer by using the ŻŹbuttons to highlight the day, and then pressing the day, highlight it, and then press the

When you ﬁnished making all your selections on the Timer screen, press either the

RETURN button. The Timer screen re-appears.

ENTER or RETURN button.

RETURN button. The Timer screen

ENTER button. To unselect a

ENTER button.

T Other Features

Program Rating Lock

The Program Rating Lock feature lets you block programs you've determined are inappropriate for your children based on the program's ratings. To access the Program Rating Lock feature and make any changes, you must enter a PIN (personal identiﬁcation number). To watch a blocked program, you must also enter the same PIN.

✎

Program Rating Lock is not available in HDMI or Component mode.

✎

The default PIN number of a new TV set is “0-0-0-0”. You can set your own PIN using the Change PIN function.

How It Works

When you access the Program Rating Lock Menu functions for the ﬁrst time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen closes and the Program Rating Lock Menu appears. Every time you access the Program Rating Lock functions, the PIN screen will appear and you must enter a PIN.

When the Rating Lock screen appears, select Program Rating

Lock, and then press

ENTER key again. Depending on what type of programs or

movies you want to block, select one of the options on the screen, and then press the

=■

TV Parental Guidelines: You can block TV programs based on their ratings. This function allows you to control what your children are watching.

=■

MPAA Rating: You can block movies based on their MPAA ratings. The Motion Picture Association of America (MPAA) has implemented a rating system that provides parents or guardians with advanced information on which ﬁlms are appropriate for children.

=■

Canadian English: You can block TV programs based on their Anglophone Canadian ratings.

=■

Canadian French: You can block TV programs based on their French Canadian ratings.

=■

Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.

ENTER. Select On, and then press the

ENTER button. The options are listed below:

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same way for each option. Each option displays a grid or table. All the tables have ratings listed on the left. The TV Parental Guidelines option also has kinds of content listed across the top: ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog.

To lock/block movies or shows with certain ratings and/or kinds of content, click the square next to the rating and/or under the kind of content. A lock appears. To unlock/unblock, click the square again. When you click a low rating, all the ratings above it will also display locks. You can also Allow All or Lock All. When done, press the

RETURN button on your remote.

=■

Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them in Enter New PIN ﬁelds. Re-enter the same 4 digits in Conﬁrm New PIN ﬁelds. When the Change PIN screen disappears, press the has memorized your new PIN.

✎

If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to “0-0-0-0” :

POWER (off) ĺ MUTE ĺ 8 ĺ 2 ĺ 4 ĺ POWER (on)

OK button. The TV

Game Mode (On/Off)

When you connect a game console such as a PlayStation™ or Xbox™ to your TV, you can enjoy a more realistic gaming experience by turning on the Game Mode function.

✎

Precautions and limitations for game mode:

x Before you disconnect the game console and connect another

external device, set Game Mode to Off in the setup menu.

x If you display the TV menu in Game Mode, the screen shakes

slightly.

✎

Game Mode is not available when the input source is set to TV.

✎

After connecting the game console, set Game Mode to On. You may notice slightly reduced picture quality.

Caption

(On-Screen Text Dialogue)

=■

Caption: You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

✎

The Caption feature does not work in Component or HDMI mode.

=■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (Digital channels only) The Digital Captions function works with digital channels.

✎

Service1~6 may not be available in digital caption mode depending on the broadcast.

=■

Digital Caption Options: (Digital channels only) Size: Options include Default, Small, Standard and Large. The

default is Standard. Font Style: Options include Default and Styles 0 to 7. The

default is Style 0. Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letters. The default is White.

- 7 -

Background Color: Options include Default, White, Black, Red,

SUM

Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the captions. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.

✎

Digital Caption Options are available only when you can select Default and Service1 ~ Service6 in Caption Mode.

✎

The Foreground and Background cannot be set to the same color.

Melody

Set so that a melody plays when the TV is turned on or off.

✎

The Melody does not play:

x When no sound is output from the T V because the MUTE

button has been pressed.

x When no sound is output from the T V because the volume has

been reduced to minimum with the

VOL – button.

x When the TV is turned of f by Sleep Timer function.

Auto Protection Time

=■

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the screen remains idle with a still image for a certain

period of time you deﬁne, the screen saver is activated to prevent the formation of ghost images on the screen.

Eco Solution

=■

Energy Saving (Off / Low / Medium / High / Picture Off) : This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.

=■

Eco Sensor (Off / On)

power savings; the picture settings will automatically adapt to the light in the room.

✎

If you adjust the Backlight, the Eco Sensor will be set to

Off.

Min. Backlight: When Eco Sensor is On, the minimum screen

brightness can be adjusted manually.

✎

If Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity.

=■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV switches to standby mode, if no picture is being received.

✎

Disabled when the PC is in power saving mode.

=■

Auto Power Off (Off / On): The TV will be automatically turned off when no user operation is received for 4 hours.

for LED 5000 series

Support Menu

Self Diagnosis

=■

Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen.

=■

Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen.

=■

Signal Strength: (Digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

: To enhance your

=■

Reset: Reset all settings to the factory defaults.

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN. Change the PIN using the Change PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest ﬁrmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centers and how to download products and software.

Media Play

Enjoy photos, music and/or movie ﬁles saved on a USB Mass Storage Class (MSC) device.

T Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, and/or movie

ﬁles to the USB jack on the back of the TV. A pop up window appears.

3. Press the

menu appears.

MEDIA.P button on your remote. The Media Play

T Using the Media Play Menu

0HGLD3OD\

9LGHRV



&KDQJH'HYLFH

To open Media Play in the Menu, follow these steps:

1. Press the

select Application on the left, and then press the button.

2. Press the Ÿ or źbutton to select Media Play (USB), and then

press the

3. Press the Ż or Ź button to select an icon (Videos, Music, Photos, Settings), and then press the

✎

Media Play might not work properly with unlicensed multimedia files.

✎

Need-to-Know List before using Media Play (USB)

MENU button. Then, press the Ÿ or ź button to

ENTER button.

x The file system supports FAT16, FAT32 and NTFS. x Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

x Media Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Devices should be connected directly to the TV’s USB port. USB HDD is not supported.

- 8 -



(QWHU$5HWXUQ

ENTER button.

MEDIA.P

ENTER

►

1/1

Movie 01.avi

files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.

x A USB device that requires high power (more than 0.5A) may not

be supported.

x Do not disconnect the USB device while it is loading. x The higher the resolution of the image, the longer it takes to

display on the screen.

x The maximum supported JPEG resolution is 15360 x 8640 pixels. x If a ﬁle is corrupted or the TV does not support the ﬁle type, the

“Not Supported File Format” message appears.

x The TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management (DRM) is a technology that supports the creation, distribution, and management of digital content in an integrated and comprehensive way, including protecting the rights and interests of content providers, preventing illegal copying of contents, and managing billing and settlements.

x PTP devices are not supported. x If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be recognized or may malfunction.

x If the TV has no input during the time period set in Auto

Protection Time, the Screensaver will run.

x The power-saving mode of some external hard disk drives may

be released automatically when your connect them to the T V.

x If you use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the ﬁles on the device.

x If a USB device connected to the TV is not recognized, the list of

ﬁles on the device is corrupted, or a ﬁle in the list is not played, connect the USB device to a PC, format the device, and check the connection.

x If a ﬁle you deleted from the PC is still found when you run Media

Play, use the “Empty the Recycle Bin” function on the PC to permanently delete the ﬁle.

x Photos only supports the sequential jpeg format. x The Videos option does not support the scene search and

thumbnail functions.

x If the number of ﬁles and folders saved on a USB storage device is

over approximately 4000, the ﬁles and folders may not appear and some folders may not open.

x The maximum displayed number of ﬁles, including sub folders, in

one folder of USB storage device is 2000.

x The media may not be playing smoothly when using the device

lower than USB 2.0.

Videos



3DXVH-XPS%7RROV$5HWXUQ

1. In the Media Play menu, press the Ż or Ź button to select

ENTER button.

Videos, and then press the

2. Press the

3. Press the

ŻŹŸź buttons to select a video in the ﬁle list.

ENTER button or O (Play) button.

The file name is displayed on the top of the screen with the playing time.

If video time information is unknown, playing time and the progress bar are not displayed.

During video playback, you can search using the Ż and

buttons.

✎

In this mode, you can play movie clips contained in a game, but you cannot play the game itself.

y Supported Subtitle Formats

External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

y Supported Video Formats

File

Extension

*.mpeg

Container Video Codec Resolution

*.mp4 MP4

*.avi

*.mkv

*.asf

*.wmv

*.ts

*.trp

*.tp

*.m2ts

*.dat

*.mpg

*.vob

*.3gp 3GPP

*.ﬂv

*.swf

AVI,

MKV

ASF

ﬂash

formats

DivX

3.11/4.x/5.1 /6.0

H264 1920x1080 6~30 30Mbps

AVC 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

DivX

3.11/4.x/5.1 /6.0

MPEG4 SP

/ ASP

H264 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

DivX 3.11 / 4.x /5.1

/ 6.0

MPEG4 SP

/ ASP

H.264 1920x1080 6~30 30Mbps

MPEG2 1920x1080 6~30 30Mbps

H. 264 BP

/ MP / HP

MPEG1 1920x1080 24/25/30 30Mbps

MPEG2 1920x1080 24/25/30 30Mbps

H. 264 BP

/ MP / HP

MPEG4 SP

/ ASP

H.264 1920x1080 6~30 30Mbps

Sorenson

H.263

1920x1080 6~30 30Mbps

Frame

rate(fps)

Bit

rate(Mbps)

Audio

Codec

MP3 /

ADPCM /

AAC

MP3 /

AC3 / LPCM / ADPCM

/ DTS

Core

MP3 /

AC3 / LPCM / ADPCM

/ WMA / WMA

Pro

AC3 /

AAC /

MP3 /

DD+ /

HE-AAC

AC3 / MPEG / LPCM /

AAC

MP3

- 9 -

Other Restrictions

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love You

Jhon

1st Album Pop 2010

4.2MB

01:10 / 04:02

SUM

Image1024.jpg 1024x768 2010/2/1 3/15

y Video content will not play, or not play correctly, if there is an error

in the content or the container.

y Sound or video may not work if the contents have a standard

bit rate/ frame rate above the compatible Frame/sec listed in the Supported Video Formats table.

y If the Index Table erroneous, the Seek (Jump) function is not

supported.

y The menu may take longer to appear if the video’s bit rate

exceeds 10Mbps.

y Video content can not be played if there are many contents in

one ﬁle.

Video Decoder

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

H.263 is not supported.

GMC is not support.

Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not supported)

WMA Lossless is not supported.

Music

Playlist

Photos

1RUPDO



3DXVH3UHYLRXV1H[W%7RROV$5HWXUQ

1. In the Media Play menu, press the Ż or Ź button to select Photos, then press the

ENTER button.

2. Press the Ż/Ź/Ÿ/ź buttons to select a photo in the ﬁle list.

3. Press the

✎

NOTE

x While a photo list is displayed, press the

ENTER button or O (Play) button.

button on the remote control to star t a slide show.

(Play) / ENTER

x All files in the file list section will be displayed in the slide show. x During the slide show, files are displayed in order. x During the slide show, you can adjust the slide show speed

using (ƭ) (REW) or (?) (FF) button.

x You can move to other files using Ż or Ź button.

✎

Media Play can play Music files automatically during a Slide Show if Background Music is set to On.

✎

You cannot change the Mode in Background Music until the Background Music file has finished loading.

y Supported Photo Formats

Image Photo Resolution

JPEG

Base-line 15360 x 8704

Progressive 1024 x 768

Other Restrictions

y CMYK, YCCK Color space JPEG are not supported.



3DXVH-XPS%7RROV$5HWXUQ

1. In the Media Play menu, press the Ż or Ź button to select Music, and then press the

ENTER button.

2. Press the Ż/Ź/Ÿ/ź buttons to select the desired Music in the

ﬁle list.

3. Press the

ENTER button or O (Play) button.

✎

During music playback, you can search using the Ż and Ź button.

✎

(REW ) and ? (FF) buttons do not function during

play.

✎

Media Play only displays files with MP3 and PCM file extension. Other file extensions are not displayed, even if they are saved on the same USB device.

✎

If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)

Playing Multiple Files

=■

Playing selected video/music/photo ﬁles

1. On the File List screen, highlight a ﬁle, and then press the Yellow

button on your remote.

2. Repeat Step 1 to select multiple ﬁles.

✎

NOTE

x A

mark appears to the left of the selected files.

x To cancel a selection, press the Yellow button again. x To deselect all selected files, press the TOOLS button, select

Deselect All, and then the

3. Press the TOOLS button, select Play Selected Contents, and

then press the

=■

Playing a video/music/photo folder

ENTER button.

1. With the folders on your USB device displayed, use the

Ż/Ź/Ÿ/ź buttons to highlight a folder.

2. Press the

ENTER

- 10 -

TOOLS button, select Play Folder, and then press the



button

ENTER button.

Media Play - Additional Functions

=■

Videos/Music/Photos Play Option menus

When playing a ﬁle, press the

Category Operation Videos Music Photos

Title

Repeat Mode

Picture Size

Picture Mode You can adjust the picture setting.

Sound Mode You can adjust the sound setting.

Subtitle Setting

Audio Format

Audio Language

Stop Slide Show /

Start Slide Show

Slide Show Speed

Background Music

Zoom

Rotate

Information

You can select another video ﬁle to play directly.

You can play movie and music ﬁles repeatedly.

You can adjust the picture size to your preference.

You can play the video with Subtitles. This function only works if the subtitles have the same ﬁle name as the video.

You can select the digital audio output format.

You can change the audio language if the video has more than one language.

You can start or stop a Slide Show.

You can select the slide show speed during the slide show.

You can set and select background music when watching a Slide Show.

You can zoom into images in full screen mode.

You can rotate images in full screen mode.

You can see detailed information about the played ﬁle.

TOOLS button.

Settings

Using the Setup Menu

=■

DivX® Video On Demand : Shows the registration code authorized for the TV. If you connect to the DivX web site and register with the 10-digit registration code, you can download the VOD activation ﬁle. Once you play it using Media Play, the registration is completed.

✎

For more information on DivX® VOD, visit “http://vod.divx. com”.

=■

Information: Select to view information about the connected

USB device.

Other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount items. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

Wall Mount Kit Speciﬁcations (VESA)

✎

The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor. When attaching to other building materials, please contact your nearest dealer. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE

x Standard dimensions for wall mount kits are shown in the table

below.

x When purchasing our wall mount kit, a detailed installation

manual and all parts necessary for assembly are provided.

x Do not use screws that do not comply with the VESA standard

screw specifications.

x Do not use screws that are longer than the standard dimension

---

or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

x For wall mounts that do not comply with the VESA standard

screw specifications, the length of the screws may differ depending on the wall mount specifications.

x Do not fasten the screws too firmly. This may damage the

product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

x Samsung is not liable for product damage or personal injury

when a non-VESA or non-specified wall mount is used or the

consumer fails to follow the product installation instructions.

x Do not mount the TV at more than a 15 degree tilt.

---

x Always have two people mount the TV on a wall.

Product

Family

LED-TV

Securing the TV to the Wall

To prevent the TV from falling

✎

Since the necessary brackets, screws, and string or cable are not supplied, please purchase these separately.

1. Insert the screws into the wall brackets and ﬁrmly fasten them to

the wall. Make sure the screws are ﬁrmly ﬁxed to the wall.

✎

We strongly recommend you drive the screws into a stud.

2. Using screws, insert the screws through the TV brackets, and

then fasten the screws to the top VESA screw holes on the back of the TV.

3. Connect the brackets on the TV and the brackets on the wall

with a strong string or cable, and then tie the string or cable tightly to the brackets.

✎

Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

✎

Install the TV close to the wall so that it does not fall.

✎

Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on the TV. Untie the string or cable before moving the TV.

✎

To purchase a T V Holder kit, contact Samsung customer care.

- 11 -

TV size in

inches

19~22 75 X 75

26 100 X 100

32~40 200 X 200 M6

46~60 400 X 400 M8

VESA screw hole specs

(A * B) in millimeters

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Standard

Screw

Quantity

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

+ 25 hidden pages

Samsung UH26EH4000, UH26EH4050, UH32EH4000, UH32EH4050, UH32EH5000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual