Samsung UE55F9000 User guide

Download

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

EIRE 0818 717100 www.samsung.com

U.K 0330 SAMSUNG (7267864) www.samsung.com

Customer Care Centre

Web Site

Ultra High Deﬁ nition

user manual

e-Manual

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

BN68-05462K-01

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

•The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,

and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not cover this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of ﬁre or electric shock.

•Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.

•This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under

environmental considerations. Please contact your local authorities for disposal or recycling information.

•Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

•Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plug end, adaptors and the point where they exit from the appliance.

•To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

•Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local

electrical supply.

•Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

•To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

•Make sure to plug the power cord in until it is ﬁrmly inserted. When removing the power cord, make sure to hold the power plug when pulling the

plug from the outlet. Do not touch the power cord with wet hands.

•If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and

contact an authorized dealer or service centre.

•Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially

when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or the insulation to deteriorate.

•Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity,

chemical substances and where it operates for 24 hours such as the aerial port, the train station etc.

•Failure to do so may cause serious damage to your set.

•Use only a properly grounded plug and receptacle.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

•To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

•Do not allow children to hang onto the product.

•Store the accessories (battery, etc.) in a location safely out of the reach of children.

•Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

•Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

•Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol,

thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

•Apparatus shall not be exposed to dripping or splashing.

•Do not dispose of batteries in a ﬁre.

•Do not short circuit, disassemble or overheat the batteries.

•Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

English - 2

Contents

6 Using the Smart Touch Control

7 Connecting to the TV 7 Inserting the Batteries (AAA X 2) 8 Using the touchpad 8 Changing Channels by Entering Numbers 9 Show Status and Notiﬁcation Banner 9 Recommendations 9 History 9 Searching 9 Adjusting the Touchpad 9 Using the Virtual Remote Control

10 Using the Remote Control

11 Installing batteries (Battery size: AAA)

11 Turning on the TV 12 Built-in TV Camera and Microphone

12 Extending the TV Camera 12 Retracting the Camera

13 Connecting the TV to One Connect 14 TV Upgrade using One Connect (sold separately) 14 Universal Remote Setup

14 Add the External Device

21 3D Active Glasses

21 Pairing 3D Active Glasses 23 Watching 3D Video

24 What is Remote Support? 25 Troubleshooting 25 Mounting the TV on the Wall Using

the Wall Mount Kit (Optional)

27 Storage and Maintenance 27 Providing Proper Ventilation for Your TV 28 Eco Sensor and Screen Brightness 28 Assembling the Cable manager 29 Tip Prevention – Securing the TV to the Wall

29 To Avoid the TV from Falling

15 SETUP 16 Switching Between Video Sources 17 Connecting to a COMMON INTERFACE

slot (Your TV viewing Card Slot)

18 Viewing the e-Manual

18 Scrolling a Page 18 Using the Icons at the Top of the Page

19 Connecting to a Network

19 Network Connection - Wireless 19 Wireless Network Precautions 19 Network Security Protocols 20 Network Connection - Wired

30 Speciﬁcations - TV

31 Licences 32 Warranty Card

33 Wiring the Mains Power Supply Plug (UK Only)

English - 3

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and speciﬁcations may change without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for customers in EU region.

Features for your new TV

•3D: This new feature enables you to view 3D content.

•SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family centre. With Smart Hub, users can surf the web, download applications, and stay in touch with family and friends through social networking services. In addition, you can enjoy photo, video, and music ﬁles stored on external storage devices.

Press the

Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and Twitter. You can also make video calls to friends by the TV camera.

Apps: Download and install applications such as Web Browser.

On TV: On TV recommends TV programmes based on their popularity or your personal preferences. (Depending

on the country)

Films and TV Shows: Purchase and watch movies and series without a separate external device. (Depending on the country)

Photos, Videos & Music: Play back photo, video, and music ﬁles from an external storage device.

™

button to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

•Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support Anynet+ with your

Samsung TV’s remote.

•e-Manual: Provides a detailed, on-screen user's manual built into your TV. (page 18)

•SMART Interaction: Using this function, you can access and control menu options and functions using motions.

•Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.

•MHL & Screen Mirroring: Displays mobile device screens on your TV using a wired or wireless connection.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government ofﬁce, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product (Applicable in countries with separate collection systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

English - 4

Accessories

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

✎

•Smart Touch Control & Batteries (AAA x 2) •Regulatory Guide

•Remote Control & Batteries (AAA x 2) •Power Cord

•User Manual •Samsung 3D Active Glasses

Scart Adapter AV Adapter Component adapter IR Extender Cable

One Connect cable One Connect Cable manager

•An administration fee may be charged if either

− (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual)

− (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual).

•The amount of such administration charge will be advised to you before any work or home visit is carried out.

Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV by the edges, as shown.

Don't Touch

This Screen!

Wireless Keyboard (Sold Separately)

English - 5

Using the Smart Touch Control

You can use the MIC to give Voice Recognition commands. Simply press the

Voice Recognition function can be affected by unclear pronunciation, voice level, or

✎

surrounding noise.

Turns the TV on and off (page 11).

Displays and selects the available

video sources (page 16).

VOICE

Turn on and off the satellite or cable set-top box connected to the TV. For this, the Smart Touch Control must be conﬁgured as a universal remote control (page 14).

VOICE

Take your voice command and enter a text using your voice.

button.

Cuts off the sound

temporarily.

Press and hold this

button to select Audio

Description and

Subtitle. (Depending

on the country or

region.)

Adjusts the volume.

This button toggles between

the Recommended and Search

functions (page 9).

The colour buttons work differently,

depending on the function that the

TV is currently performing.

Press and hold the

watching TV to view information

about the current programme.

Returns to the previous menu.

Press and hold this button to exit all

currently running applications.

Brings up Smart Hub applications.

See the e-Manual chapter, Smart

TV Features > Smart Hub.

To exit an application that is

✎

running, press the

{

button while

™

button.

Changes channels.

Displays a virtual remote panel on the screen. See the e-Manual chapter, Controlling TV > Using

the Virtual Remote Control.

Pressing and holding the

MORE button takes the user to

the Virtual Remote Control’s Quick Access Panel (page 9).

Touch Pad (page 8).

•Drag on the Touch Pad to move

the cursor on the screen.

•Press the Touch Pad to

run, activate, or select the highlighted item.

•Press and hold the touch pad to

display the Channel List.

View each digital channel's programming schedule, including showtimes. In addition, sets a

Schedule Viewing or Schedule Recording to press the touch pad

on the programme entry scheduled to air later.

English - 6

Connecting to the TV

In order to operate the TV using a Smart Touch Control unit, you must ﬁ rst pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired Samsung TV.

We recommend to use the Smart Touch Control in less than 6m. A usable distance may differ depending on the

✎

wireless environmental conditions.

1. When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press the TV button for the ﬁ rst pairing. Only this buttons sends an IR signal. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control automatically.

Reconnecting the Smart Touch Control

If the Smart Touch Control stops operating or works abnormally, replace

the battery as this may be caused by insufﬁ cient battery power. If the problem persists, press the to restore pairing with the TV. The without removing the Smart Touch Control's battery cover. Within a distance between 30cm to 4m, point the Smart Touch Control to the TV receiver and press the pairing image displays at the bottom left of the TV screen.

Battery Low Alarm

If the battery becomes low while using the Smart Touch Control, the following alarm window blinks and appears at the bottom left of the screen. If the alarm window pops up, replace the batteries of the Smart Touch Control. Use alkaline batteries for longer usage.

Inserting the Batteries (AAA X 2)

PAIRING button on the Smart Touch Control

PAIRING button cannot be accessed

PAIRING button. When pairing is complete, the

1. Slightly lift the battery cover using a plastic card. Next, pull on the cover’s notch with a ﬁ ngernail to remove the cover

completely.

Check the location of the battery cover groove. The groove's location may vary depending on the type of

✎

Smart Touch Control is provided with the product.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

3. Align the battery cover with the back of the remote control and press down along the edges until it is cleanly attached to

the remote control.

English - 7

Using the touchpad

Use the touchpad to perform various commands. Navigate to Tutorial (System > Device Manager > Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.

Dragging Press

Drag on the touchpad in the desired direction.

Move the focus or the pointer in the direction the ﬁnger is

dragging.

Scrolling Up and Down Scrolling Left and Right

Slide a ﬁnger along the ridge on either side of the Touch Pad to scroll up or down in a list or webpage. The ridge

on the left side is designed for left-handed users.

Press on the touchpad. This selects the highlighted item.

When watching TV, pressing and holding the touchpad

displays the channel list. On some apps, pressing and

holding the touchpad for over 2 seconds displays a list of

functions available for the app.

Move your ﬁnger horizontally on the ridge at the top of the

touchpad. You can horizontally scroll a horizontal list or

the Smart Hub panel.

Changing Channels by Entering Numbers

While watching TV, press the ridge on the left or right edge of the touchpad to bring up the numerical input window on the screen. Use your ﬁnger to enter the number for the channel you want to watch. The recognised number is displayed on the screen and the TV switches to the corresponding channel. See the e-Manual chapter, Controlling TV >

Touchpad.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you do not follow the sequences shown below.

English - 8

Show Status and Notiﬁcation Banner

Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel to display the status and notiﬁcation banner at the top of the screen.

Recommendations

Press the RECOMM. / SEARCH button and then select Recommended from the list displayed at the bottom of the screen. Select a programme that is currently airing to jump to the corresponding channel or a programme that is scheduled to air to set up a Schedule Viewing or Schedule Recording setting. Select an application to launch. Samsung Apps will launch if the selected application is not installed on the TV.

History

Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of the screen. This displays an interactive list of recently accessed channels, media content and applications.

The RECOMM. / SEARCH button may function as a History recall feature, depending on your country or region.

✎

Deleting History Data

You can delete the history information about recently viewed channels, content and applications.

Searching

Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears at the bottom of the screen. Press

RECOMM. / SEARCH button again. The keypad will appear on the screen. Enter search criteria to search not only

the many apps and their contents on the TV but also the Web. This button toggles between Recommended and Search.

Adjusting the Touchpad

Users can adjust the sensitivity of the Smart Touch Control’s touchpad. Set Touch Sensitivity to adjust sensitivity and make it more convenient to use.

Using the Virtual Remote Control

Press MORE button to display the virtual remote panel on the screen. The virtual remote panel consists of a number panel, a playback control panel, and a quick access panel. Use the touchpad to select numbers and buttons.

The displayed virtual remote panel on the TV screen may differ depending on the country.

✎

Changing the Virtual Remote Panel

Choose the number panel, playback control panel, or quick access panel as the panel to be shown on the screen.

Use the touchpad to keep moving the cursor left or right. The panel changes when the cursor is moved beyond the leftmost or rightmost edge.

Use left/right scroll function on the touchpad to change the panel easily.

✎

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next ﬁle, and much more while enjoying media content.

Using the Quick Access Panel

Quickly access the operating mode of the Smart Touch Control unit (with the TV only, as a universal remote, etc.).

INFO, MENU and e-Manual buttons. However, the availability of buttons vary depending on the

English - 9

Using the Remote Control

Learn where the function buttons are on your remote. Especially note these:

SOURCE, MUTE,

Y, < P >

MENU, TOOLS, E, INFO, CH LIST, RETURN, GUIDE and EXIT.

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually

✎

impaired persons.

Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, refer to the

✎

e-Manual.

SOURCE

Turns the TV on and off.

Displays and selects the available video sources.

Gives direct access to channels.

Alternately select Teletext ON Double,

Mix or OFF.

TTX/MIX

PRE-CH

MUTE

Returns to the previous channel.

Cuts off the sound temporarily.

Adjusts the volume.

CH LIST

Changes channels.

Displays channel lists on the screen.

Opens the OSD (Menu).

Quickly selects frequently used

functions.

Moves the cursor, selects the on-

screen menu items, and changes the

values seen on the TV's menu.

Returns to the previous menu.

Use these buttons according to the

directions on the TV's screen.

Use these buttons in a speciﬁc feature.

Use these buttons according to the

directions on the TV's screen.

TOOLS

RETURN

E-MANUAL

SMART

GUIDE

HUB

INFO

EXIT

BCD

AD/SUBT.

Brings up Smart Hub applications. See the e-Manual chapter, Smart TV Features > Smart Hub.

Displays the EPG (Electronic Programme Guide).

Displays information on the TV screen.

Exits the menu.

E-MANUAL: Displays the e-Manual.

: Turns the 3D function on or off.

See e-Manual chapter TV Viewing >

3D TV.

AD/SUBT.: Turns the audio description

on and off (not available in some locations). / Displays digital subtitles. See e-Manual chapter TV Viewing > Subtitles.

: Stop.

English - 10

Installing batteries (Battery size: AAA)







Match the polarity of the batteries to the symbols in the battery compartment.

NOTE

✎

− Use the remote control within 23 feet of the TV.

− Bright light may affect the performance of the remote control. Avoid using when near special ﬂuorescent lights or neon signs.

− The colour and shape may vary depending on the model.

Turning on the TV

Turn on the TV using the

The product colour and shape may vary depending on the model.

✎

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the

✎

button on the remote control or TV panel.

remote control.

Camera

Function menu

Remote control sensor



TV Controller

On-screen display shown when using

TV Controller.

English - 11

Built-in TV Camera and Microphone

주의

This TV features a built-in TV camera that can be used for the Motion Control, Voice Recognition (built-in microphone), and Face Recognition features. You can also use the knob for camera's angle adjustment to change the camera's viewing angle.

From the Top From Behind

Microphone

Knob for camera's angle adjustment

Lens

Microphone

Extending the TV Camera

In order to use the TV camera, you must ﬁrst extend it.

Gently push the camera in without touching the lens until you hear a click.

Retracting the Camera

If you are not using the TV camera, keep it retracted inside the TV. The Motion Control and Face Recognition features cannot be used while the TV camera is in the retracted state, but Voice Recognition will still be available.

Gently push the camera in without touching the lens until you hear a click.

Do not touch the lens while operating the TV camera. Leave ﬁngerprints that may affect the image quality. If the lens gets dirty, clean it using a soft piece of cloth.

English - 12

Connecting the TV to One Connect

One Connect must be connected to the TV via the One Connect cable before connecting an external device. The One Connect cable has two different ends, Connect the TV to One Connect referring to the diagram.

<TV-end Connector><One Connect-end Connector>

[The connectors at both ends of the One Connect cable are different from each other in shape.

When connecting the One Connect cable to the TV, make sure that the right connector is plugged into the TV. Otherwise, it may cause product failure.

English - 13

TV Upgrade using One Connect (sold separately)

One Connect (sold separately)

Connecting One Connect (sold separately) to a Samsung TV will allow you to enjoy the latest features and content without having to purchase a new TV. Experience the latest features and services offered by Samsung Electronics via One Connect.

One Connect is sold separately. Purchasing One Connect will allow you to upgrade the software to the version

✎

from the year in which your One Connect was released. Not supported on all models.

Universal Remote Setup

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theatres, and other third-party external devices connected to the TV using the TV's remote control.

5 cm

Plug the cable into the TV IR connector and then point the transmitter at the other end of the cable towards the external device's remote panel receiver. However, there can' be any obstacles between the IR extension cable and the external device. The presence of an obstacle will interfere with the transmission of the remote control signal.

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and then press SOURCE to bring up the Source screen.

2. Select Universal remote setup from the top of the screen. This initiates the universal remote setup process.

3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote control by

entering the model number manually.

English - 14

SETUP

The initial setup dialog appears when the TV is ﬁrst activated. Follow the on-screen instructions to ﬁnish the initial setup process, including menu language choice, channel scan, network connection, and more. At each step, either make a choice or skip the step. Users can manually perform this process at a later time under the Screen Menu > System > Setup menu.

If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to

✎

Set-top box automatically.

If you do not want to select Set-top box, please select Aerial.

✎

Samsung ‘On TV’ Recommendations Service

The On TV service recommends TV programmes based on their popularity or your personal preferences. To enjoy the On TV service, please follow the steps below. (You must have an Internet connection.)

1. Conﬁgure your TV: Select TV source to be used for On TV.

Aerial: Freeview, Freesat, DVB-T/C/S

Set-top box: External Cable Box, External Satellite Box

2. Auto tuning channels: This step only occurs if ‘Aerial’ was selected in step 1.

3. Select a Service Provider: To select your preferred programme provider for On TV, enter your postcode and select your

Freeview, Freesat or external satellite television provider from the displayed list.

4. Set-top Box Control Test: This test is for checking that your TV remote can control your Set-top Box. This step only occurs if ‘Set-top box’ was selected in step 1.

Password Change

Screen Menu > System > Change PIN

Change the TV’s password.

1. Run Change PIN and then enter the current password in the password ﬁeld. The default password is “0-0-0-0”.

2. Enter a new password and then enter it again to conﬁrm it. The password change is complete.

If you forget the PIN code, press the buttons in the following sequence which resets the PIN to “0-0-0-0”:

✎

For Standard Remote Control: In Standby mode:

For Smart Touch Control: When the TV turns on:

RETURN → Volume up → RETURN

MUTE → 8 → 2 → 4 → POWER (On)

MUTE → Volume up → RETURN → Volume down →

English - 15

Switching Between Video Sources

SOURCE button to switch between devices connected to the TV.

Press

For example, to switch to a game console connected to the second HDMI connector, press the Source list, select HDMI2. The connector names may vary depending on the product. Select Tools upper-right corner of the screen to access the following functions.

For some compatible devices connected via SCART or HDMI sockets, the TV may automatically select the

✎

correct source when this device is accessed. For this to work the HDMI Anynet+ system must be switched on (see Screen Menu > System > Anynet+ (HDMI-CEC)). Anynet+ will also automatically power off compatible HDMI devices when the TV is switched off.

•Anynet+ (HDMI-CEC)

A list appears showing Anynet+ compatible ones of external devices connected to the TV.

This function is only available Anynet+ (HDMI-CEC) function set to On.

✎

•Edit Name

You can rename devices connected to the TV to more easily identify external sources.

With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can change Edit Name to PC.

With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI PC.

With an AV device connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change

Edit Name to DVI Devices.

SOURCE button. From

button at the

•Information

View detailed information about the connected devices.

•Disconnect USB Device

Remove the USB device from the list safely. This function is only available when the USB device selected.

•Universal remote setup

To add a new external device to control it with the Smart Touch Control, press the Universal remote setup on the top right of the screen.

Using the universal remote control, users can control external devices connected to the TV, such as a settop box, Blu-ray player, and AV receiver.

SOURCE button and select

English - 16

Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)

Turn the TV off to connect or disconnect a CI card.

✎

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

•If you don’t insert the “CI or CI+ CARD”, some channels will display the

message “Scrambled Signal”.

•The pairing information containing a telephone number, the “CI or CI+

CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

•When the conﬁguration of channel information has ﬁnished, the message

“Updating Completed” is displayed, indicating the channel list is updated.

NOTE

✎

•You must obtain a “CI or CI+ CARD” from a local cable service provider.

•When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+

CARD” may cause damage to it.

•Insert the “CI or CI+ CARD” in the direction marked on the card.

•The location of the COMMON INTERFACE slot may be different depending on the model.

•“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

•If you have any problems, please contact a service provider.

•Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be

seen.

English - 17

Viewing the e-Manual

The embedded e-Manual contains information about your TV's key features.

This TV has a built-in user guide. To read it, use one of the following methods:

•Open the Support menu and choose e-Manual (Troubleshooting).

•Press the

until e-Manual appears and select it. Words in blue refer to screen menu options and words in light blue refer to remote control buttons.

✎

A printable version of this guide is also available at www.samsung.com/support.

✎

Scrolling a Page

To scroll a page, use of one of the following methods:

•Press the

•Drag or ﬂick up or down the ridge on either the left or right edge of the touchpad.

•Place the cursor on the

Using the Icons at the Top of the Page

Use the Back, Forward, and Opened page icons on the top left of the screen to navigate through pages. These icons are available when two or more pages are passed.

E-MANUAL button on the standard remote control. MORE button on the Smart Touch Control to display control buttons on the screen. Flick the touchpad

or button on the scroll bar at the right edge of the screen.

or button at the right edge of the screen, drag or ﬂick up or down on the touchpad.

Returning to the Home Page

To return to the home page, press the

button or select on the top right of the screen.

Searching the Index

Press the containing the term.

button or select on the top right of the screen to display the index. Select a term to display the page

Searching Pages

Press the select Done. Select an item from the search results list to navigate to the relevant page.

{

button or select on the top of the screen to access the search screen. Enter a search phrase and

Closing the e-Manual

To close the e-Manual, press and hold the

EXIT button.

press

RETURN button or select at the upper-right corner of the screen or

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select a menu item directly to the related section in the e-Manual. If you want to read an e-Manual entry on a speciﬁc screen menu feature, press the virtual remote panel's or the regular remote's e-Manual page.

This feature may not be available, depending on the menu.

✎

E-MANUAL button to load the corresponding

Try Now

. It is possible to jump from

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-Manual can be updated in the same way with an application update.

On the More Apps screen, select Apps to update, and then select e-Manual from the list. The e-Manual starts updating to the latest version. However, Apps to update appears on the screen only when the update is required.

English - 18

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the Smart Hub, as well as software updates.

Network Connection - Wireless

Connect the TV to the Internet using a standard router or modem.

Wireless IP Router or Modem

that has a DHCP Server

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless Network Precautions

•This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE

802.11n. Otherwise when you play video over a network connection, the video may not play smoothly.

•To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router

supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

•Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is

currently being used by another device, the result is usually interference and/or a communications failure.

•Most wireless networks have an optional security system. To enable a wireless network's security system, you

need to create a security key using characters and numbers. This security key is then needed to connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to non-certiﬁed wireless routers:

•Authentication Modes: WEP, WPAPSK, WPA2PSK

•Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenﬁeld) 802.11n mode and the Encryption Type to WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new Wi-Fi certiﬁcation speciﬁcations.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using PBC (Push Button Conﬁguration) or a PIN (Personal Identiﬁcation Number). WPS automatically conﬁgures the SSID and WPA key settings.

English - 19

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated starting below:

The Modem

Port on the Wall

The Modem

Port on the Wall

The LAN Port

on the Wall

External Modem

(ADSL / VDSL / Cable TV)

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

External Modem

(ADSL / VDSL / Cable TV)

Modem Cable (Not Supplied)

LAN Cable

(Not Supplied)

IP Router that has a

DHCP Server

LAN Cable

(Not Supplied)

One Connect

LAN Cable (Not Supplied)

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

✎

English - 20

3D Active Glasses

Features

Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the 2.4GHz RF band.

The Samsung 3D glasses are only compatible with Samsung D, E, and F series 3D TV's that were released in

✎

2011, 2012, and 2013. These 3D glasses cannot be connected to other Bluetooth devices.

Parts

LED Indicator & Power Button

Battery Cover

Liquid crystal shutter

For details on how to attach the glasses' arms and how to pair the glasses with the TV, refer to the separate 3D glasses manual.

Replacing the Battery

If the red LED blinks every two seconds continually, replace the battery with a new one.

Insert the "+" side of the battery into the side marked with "+" in the battery compartment.

✎

To check the remaining battery capacity, refer to the pairing section in this manual.

✎

Pull the battery

cover downward

Open the battery

cover

Remove the

battery

Replace the

battery

Push the battery cover downward

Close the battery

cover

Pairing 3D Active Glasses

What is Pairing? Pairing is the process of connecting 3D glasses and a 3D TV so that the two devices can

✎

exchange data.

Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm) apart from each other while pairing

✎

is in progress.

•Turning the glasses on

Press the power button brieﬂy. The green LED is turned on for 3 seconds. (Make sure that 3D is activated on the TV before using the 3D glasses.)

•Turning the glasses off

Press the power button brieﬂy. The red LED is turned on for 3 seconds.

•Performing the pairing process

Turn the TV on and let it power up completely. Press and hold the Power button on the glasses. The green and the red LEDs blink alternately for 2 seconds.

English - 21

•Operating range

Recommended pairing distance

2~6m

Recommended viewing distance

Recommended viewing distance 2~6m (6.5 to 19.5 ft) Recommended pairing distance 50 cm or less (19.5 in)

Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (This feature only

✎

applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013.)

If you keep trying to pair the glasses and the TV, the battery level will decrease significantly. However, the battery

✎

level will recover to a certain degree in about a minute.

The working distance depends on the existence of obstacles (a person, metal, walls, etc.) between the glasses

✎

and the TV and the strength of the Bluetooth signal.

Turn off the 3D glasses while they are not in use. If you leave the 3D glasses on, the battery lifespan decreases.

✎

50 cm

Pairing steps

1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.

2. Press the power button on the 3D glasses brieﬂy. The 3D glasses will power on and pairing will start.

3. The message “3D glasses are connected to TV.” will be displayed on the TV screen when the pairing is successfully

completed.

•If pairing fails, the 3D glasses will power off.

•If the ﬁrst attempt to pair fails, power the TV off and on again and perform step 2.

•How to pair again: Press the power button on the 3D glasses for more than 1 second.

Pairing is needed again in the following situations:

•If the 3D glasses do not function, even when the power button is pressed, especially with a 3D TV after a

repair.

•If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F series released

in 2011 through 2013. You must pair the glasses with the other TV.

English - 22

Watching 3D Video

Some 3D modes may not be available depending on the format of the image source.

To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button.

1. Go to the 3D screen. (Picture > 3D)

2. Select the 3D Mode. The 3D Mode screen appears.

3. Set the 3D Mode of the image you want to view.

Troubleshooting

If you encounter... Try this...

Replace the battery.

My 3D glasses do not work.

The LED keeps blinking The battery is dead. Replace the battery.

Speciﬁcations (Model Number: SSG-5100GB )

Shutters Liquid crystal Transmittance 36±2%

Optics

Weight Glasses 21.5g/.76 oz. (including the battery: 24.0±0.5g/.85.±.018oz. ) Power Glasses One 3V lithium/manganese dioxide battery 3V(CR2025)

Power consumption

Operating conditions

Recommended operating distance

Glasses 0.85mA (Average)

Battery

Operating temperature

Custody temperature

The 3D glasses should be close to the TV. Make sure that the distance between the TV and your 3D glasses is less than 19.5 feet (6m) in a straight line.

Check the 3D function settings of your TV.

2 ~ 6m (6.5 to 19.5 ft) Field Rate 120 ﬁelds/second

Type 165mAh, 3.0V (CR2025) Operating time 150 hours

50 °F ~ 104 °F (10°C ~ 40°C)

-4 °F ~ 113 °F (-20°C ~ 45°C)

Product speciﬁcations may be changed without notice in order to enhance product performance.

The continuous operating time may differ depending on the wireless communication environment and usage

✎

conditions.

[ Recommendation ]- EU ONLY

Hereby, Samsung Electronics, declares that this 3D Active Glasses is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

This equipment may be operated in all EU countries.

English - 23

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely.

•Diagnose your TV

•Adjust the TV settings for you

•Perform a factory reset your TV

•Install recommended ﬁrmware updates

How Does it Work?

Having a Samsung Tech remotely service your TV is really pretty simple

1. Call Samsung Contact

Centre and ask for

remote support.

2. Open the menu on your TV and go to the Support

section.

3. Select Remote Management and Provide the Pin# to the agent.

4. The agent will then access your TV. That's

it!

English - 24

Troubleshooting

If you have any questions about the TV, ﬁrst refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues Solutions and Explanations

The TV won’t turn on. •Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

•Make sure the wall outlet is working.

•Try pressing the

refer to “Remote control does not work” below.

button on the TV to make sure the problem is not the remote. If the TV turns on,

There is no picture/video. •Check the cable connections. Remove and reconnect all cables connected to the TV and external

The remote control does not work. •Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in

The cable/set top box remote control doesn’t turn the TV on or off or adjust the volume.

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce.

✎

devices.

•Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to match the TV's

input connections. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

•Make sure your connected devices are powered on.

•Be sure to select the correct input source.

•Reboot the connected device by unplugging it, and then reconnecting the device’s power cable.

the correct direction.

•Clean the sensor’s transmission window on the remote.

•Try pointing the remote directly at the TV from 5~6 feet away.

•Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set-Top-Box user

manual for the SAMSUNG TV code.

There may be, however, be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by USB

✎

(Samsung.com > Support > Downloads).

Some of above pictures and functions are available at specific models only.

✎

Mounting the TV on the Wall Using the Wall Mount Kit (Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the wall mount on your own.

English - 25

Preparing before installing Wall-Mount

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

Wall Mount Kit Speciﬁcations (VESA)

The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the

✎

floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

NOTE

✎

− Standard dimensions for wall mount kits are shown in the table below.

− When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

− Do not use screws that do not comply with the VESA standard screw speciﬁcations.

− Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV set.

− For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the screws may differ depending on the wall mount speciﬁcations.

− Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

− Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed wall mount is used or the consumer fails to follow the product installation instructions.

− Do not mount the TV at more than a 15 degree tilt.

Product

Family

LED-TV 55 - 65 400 X 400 M8 4

Inch VESA Spec.(A * B) Standard Screw Quantity

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

English - 26

Storage and Maintenance

If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the

✎

debris off before watching TV.

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and

✎

screen carefully using a soft cloth to prevent scratches.

Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, ﬁre, or electric shock.

Clean the product with a soft cloth dampened with a small amount of water. Do not use a ﬂammable liquid (e.g. benzene, thinners) or a cleaning agent.

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or a problem with the product caused by an increase in its internal temperature.

Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts provided by

✎

Samsung Electronics only.

•If you use parts provided by another manufacturer, it may cause difﬁculties with the product or result in injury

caused by the product falling.

Installation with a stand. Installation with a wall-mount.

10 cm

Other Warnings

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be somewhat hot.

✎

English - 27

Eco Sensor and Screen Brightness

Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption. This causes the TV to brighten and dim automatically. If you want to turn this function off, go to Screen Menu > System > Eco Solution > Eco Sensor

The shape of TV stand may differ depending on the model.

✎

Do not block the sensor with any material. It can decrease picture brightness.

1. Eco Sensor: This power-saving feature automatically adjusts the screen brightness of the TV according to the ambient

light intensity detected by the Light Sensor.

2. To enable or disable Eco Sensor, go to Screen Menu > System > Eco Solution > Eco Sensor and select On or Off.

3. Precaution: If you ﬁnd the screen too dark while watching the TV in a dark area, this may be caused by the Eco Sensor.

Assembling the Cable manager

English - 28

Tip Prevention – Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device as described below.

To Avoid the TV from Falling

1. Put the screws into the clamps and ﬁrmly fasten them onto the wall. Conﬁrm that

the screws have been ﬁrmly installed onto the wall.

You may need additional material such as an anchor depending on the

✎

type of wall.

Since the necessary clamps, screws, and string are not supplied, please

✎

purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

Screws may not be supplied with the product. In this case, please

✎

purchase the screws of the following specifications.

Screw Specifications

✎

For a 55 ~ 65 inch: M8

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto the wall with a strong cable and then tie the string tightly.

NOTE

✎

•Install the TV near to the wall so that it does not fall backwards.

•It is safe to connect the string so that the clamps ﬁxed on the wall are equal to or lower than the clamps

ﬁxed on the TV.

•Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

Wall

English - 29

Speciﬁcations - TV

Display Resolution 3840 x 2160

Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Stand Swivel (Left / Right) 0˚

Model Name UE55F9000 UE65F9000

Screen Size (Diagonal)

Sound (Output) 70W (15W X 2, woofer 20W X 2)

Dimensions (W x H x D) Body With stand

Weight Without Stand With Stand

Design and specifications are subject to change without prior notice.

✎

For information about the power supply, and more about power consumption, refer to the label attached to the

✎

55 inches 65 inches

1245.6 x 717.8 x 38.6 mm

1245.6 x 764.2 x 220.0 mm

22.2 kg

25.0 kg

product.

Typical power consumption is measured according to IEC 62087 Ed.2

✎

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C) 5% to 95%, non-condensing

1462.3 x 837.8 x 40.7 mm

1462.3 x 884.2 x 320.0 mm

32.1 kg

35.8 kg

Standby mode

To decrease power consumptionunplug the power cord when you don't use the TV for a long time.

Recommendation - EU Only

•Hereby, Samsung Electronics, declares that this LED TV is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

•The ofﬁcial Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product

Support and enter the model name.

•This equipment may only be used indoors.

•This equipment may be operated in all EU countries.

English - 30

Licences

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles), still image elements (such as TV channel logos, stock or news bars at the screen bottom etc.), or programmes in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect image quality. To reduce risk of this effect, please follow the recommendations below:

•Avoid displaying the same TV channel for long periods.

•Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible match.

•Reduce brightness and contrast to avoid the appearance of after-images.

•Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.

WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if

✎

the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Set-top Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture.

IMPORTANT: Image retention issues are not covered by your Samsung® warranty.

✎

English - 31

Warranty Card

United Kingdom Republic of Ireland (EIRE)

This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difﬁculty, details of our Authorised Service Centres are available from:

Samsung E lectronics U.K. Ltd.

Customer Care Centre

PO Box 479

GATESHEAD NE9 9BJ

United Kingdom

Tel: 0330 SAMSUNG (7267864) / Fax: 0330 7260001 (UK & Northern Ireland)

Tel: 0818 717100 / Fax: +44 117 915 6736 (EIRE Only)

Web: www.samsung.com

WARRANTY CONDITIONS

1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and

is presented with the original invoice or sales slip or conﬁrmation, and the serial number on the product has not been defaced.

2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.

3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement

will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.

4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any country other than the one for which the product was originally designed and manufactured.

5. This warranty covers none of the following:

a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear and tear. b) Cost relating to transport, removal or installation of the product. c) Misuse, including the faiure to use this product for its normal purposes or incorrect installation. d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public Disturbances, incorrect mains voltage,

improper ventilation or any other cause beyond the control of Samsung.

e) Spillage of food or liquid or use of any other hazardous substances, which may effect the product. f) Performance due to differences in broadcasting method between countries

6. This warranty is valid for any person who legally acquired possession of the product during the warranty period.

7. The consumers statutory rights in any applicable national legislation whether against the retailer arising from the purchase

contract or otherwise are not affected by this warranty. Unless there is national legislation to the contrary, the rights under this warranty are the consumers sole rights and Samsung, its subsidiaries and distributors shall not be liable for indirect or consequential loss or any damage to records, compact discs, videos or audio taper or any other related equipment or material.

8. Some products may differ from these guidelines. Please check with your dealer or the local Samsung web-site.

Wiring the Mains Power Supply Plug (UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.

Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.

If the ﬁtted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitably approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug.

Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared ﬂexible cord.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as

follows : The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Samsung UE55F9000 User guide

Specifications and Main Features

Frequently Asked Questions

User Manual