Samsung UE22C4010PW User Manual [ru]

Связывайтесь с SAMSUNG по всему миру
Если у вас есть предложения или вопросы по продуктам Samsung, связывайтесь с информационным центром Samsung.
Страна Центр поддержки покупателей Веб-узел
RUSSIA 8-800-555-55-55 www.samsung.ru
Georgia 8-800-555-555 -
Armenia 0-800-05-555 -
Azerbaijan 088-55-55-555 -
KAZAKHSTAN 8-10-800-500-55-500 -
UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru
KYRGYZSTAN 00-800-500-55-500 www.samsung.com
TADJIKISTAN 8-10-800-500-55-500 www.samsung.com
UKRAINE 0-800-502-000
Belarus 810-800-500-55-500 -
Moldova 00-800-500-55-500 -
Производитель:
ООО «Самсунг Электроникс Рус Калуга», 249002, Калужская обл., Боровский р-н, д. Коряково, Первый Северный проезд, владение 1
LED-ТЕЛЕВИЗОР руководство пользователя
UE19C4000P UE22C4000P UE22C4010P
UE26C4000P
LED-ТЕЛЕВИЗОР
руководство пользователя
удивительные возможности
Благодарим за приобретение продукции компании Samsung. Для получения полного обслуживания зарегистрируйте свое устройство по адресу
www.samsung.ru/club/registration
Модель_______Серийный номер_______
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
[UC4000_19]BN68-02655H-RU.indb 1 2010-04-05 오후 1:35:45
BN68-02655H-00
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Digital TV notice
1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.
3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts cannot be guaranteed.
4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may
be required to agree to terms and conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6. For more information, please contact your local Samsung customer care centre.
The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV
performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
2
10 cm
English
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
[UC4000_19]BN68-02655H-RU.indb 2 2010-04-05 오후 1:35:45
Contents
Getting Started
4
Connections
8
Basic Features
11
Advanced Features
23
Other Information
34
4 Accessories 5 Viewing the Control Panel 6 Viewing the Remote Control 7 Connecting to an Antenna 7 Plug & Play (Initial Setup)
8 Connecting to an AV Device 9 Connecting to an Audio Device 10 Changing the Input Source
11 How to Navigate Menus 11 Using the INFO button (Now & Next guide) 11 Planning Your Viewing 13 Channel Menu 15 Picture Menu 17 Sound Menu 19 Setup Menu 21 Support Menu
23 Connecting to a PC 24 Media Play 30 Anynet+
ENGLISH
34 Analogue Channel Teletext Feature 35 Assembling the Cables 35 Installing the Wall Mount 37 Anti-theft Kensington Lock 37 Securing the TV to the wall 38 Troubleshooting 41 Specifications 42 Index
Check the Symbol!
TOOLS
[UC4000_19]BN68-02655H-RU.indb 3 2010-04-05 오후 1:35:46
This function can be used by
pressing the TOOLS button on the
remote control.
Note One-Touch Button
English
3
Getting Started
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items’ colours and shapes may vary depending on the models.
Cables not included in the package contents can be purchased separately.
y Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide (Not available in some locations)
(M4 X L8)
y Blanking Bracket & Screw (X1)
(26 inch model Only)
y Cable Tie y Holder-Wire (3ea)
y Holder-Ring (4ea)
(26 inch model Only)
y Cleaning Cloth y Power Cord
y Holder-Wire stand
(26 inch model Only)
y AV Adapter y Component Adapter y SCART Adapter
UE19C4000P, UE22C4000P / UE22C4010P
See separate guide for installing the stand.
y Stand Base y Stand Body
UE26C4000P
See separate guide for installing the stand.
s
s
s
y Stand (1EA) y Guide Stand (1EA) y Screws (10EA)
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Maximum thickness - 0.55 inches (14mm)
s
s
(A)
(B)
5EA (M4 X L12)
5EA (M4 X L8)
English
4
[UC4000_19]BN68-02655H-RU.indb 4 2010-04-05 오후 1:35:49
Viewing the Control Panel
The product colour and shape may vary depending on the model.
01 Getting Started
Power Indicator
Speakers
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
(Power)
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER button on the remote control.
Adjusts the volume. In the OSD, use the and buttons on the remote control.
Changes the channels. In the OSD, use the and buttons on the remote control.
Turns the TV on or off.
Remote control sensor
buttons as you would use the
buttons as you would use the
English
[UC4000_19]BN68-02655H-RU.indb 5 2010-04-05 오후 1:35:49
5
Getting Started
Viewing the Remote Control
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons.
POWER SOURCE
Turns the TV on and off.
Selects the HDMI mode directly.
Have direct access to channels.
Alternately select Teletext ON, Double,
Mix or OFF.
Adjusts the volume.
Opens the OSD.
Displays Media Play (USB) (p. 24).
Quickly select frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Returns to the previous menu.
These buttons are for the Channel Manager,
Media Play (USB) menu, etc.
Use these buttons in Media Play (USB)
and Anynet+(HDMI-CEC) modes
(p. 24, 30).
(: Controls recording for Samsung
recorders that have the Anynet+ feature)
HDMI
TTX/MIX
PRE-CH
CH LIST
MENU
MEDIA.P
TOOLS
RETURN
A B C D
P.MODE
AD
S.MODE
P.SIZE
GUIDE
INFO
EXIT
DUAL
SUBT.
Displays and selects the available video sources. (p. 10)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel lists on the screen (p. 13). Displays the EPG (Electronic Programme Guide) (p. 11).
Displays information on the TV screen.
Exits the menu.
P.MODE: Press to select the picture
mode (p. 15).
S.MODE: Press to select the sound
mode (p. 17).
DUAL -: Sound effect selection
(p. 19).
AD: Turns the audio description on and
off (p. 18). This is not available in some locations.
P.SIZE: Selects the picture size (p. 16). SUBT.: Displays digital subtitles (p. 20).
Installing batteries (Battery size: AAA)
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid using nearby special fluorescent light or neon signs.
The colour and shape may vary depending on the model.
x
English
6
[UC4000_19]BN68-02655H-RU.indb 6 2010-04-05 오후 1:35:50
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the mains and antenna.
If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.
VHF/UHF Antenna
Cable
or
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
Selecting a language
1
Selecting Store Demo
2
or Home Use
Selecting a country
3
Selecting an antenna
Press the or button, then press the ENTER Select the desired OSD (On Screen Display) language. Press the or button, then press the ENTER
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.
Press the or button, then press the ENTER Select the appropriate country. If the desired country does not exist on the menu, select Others. Press the or button, then press the ENTER button. Select Air or Cable.
button.
button.
button.
ANT OUT
POWER
P
4
Selecting a channel
5
Setting the
6
Clock Mode
Time Zone
7
Viewing the HD
8
Connection Guide. Enjoy your TV.
Press the or button, then press the ENTER button. Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel Auto Store (p.13).
Press the ENTER button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually. Press the or button to select Auto, then press the ENTER Press the or button to select the your time zone, then press the ENTER
(depending on the country). The connection method for the best HD screen quality is displayed.
Press the ENTER button.
button.
button
9
01 Getting Started
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.
English
[UC4000_19]BN68-02655H-RU.indb 7 2010-04-05 오후 1:35:51
7
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI Cable: HD connection (up to 720p/1080i)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)
W
R
Red White
DVD
DVD
HDMI OUT
HDMI IN 1(DVI), 2, PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable
x
connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the
PC/DVI AUDIO IN jacks for audio.
If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI
x
versions older than 1.3 is connected, the T V may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal Colour).
If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
x
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.
It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
x
connection error may occur.
Using a Component (up to 720p/1080i) or Audio/Video (480i only) and Scart Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Blu-ray player
COMPONENT OUT
PR PB Y
AUDIO OUT
R-AUDIO-L
AUDIO OUT
R-AUDIO-L
DVI OUT
DVD
VIDEO OUTAUDIO OUT
R-AUDIO-L
R
B
VCR
EXT
R
B
W
W
RGB
In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
To obtain the best picture quality, the Component connection is recommended over the A /V connection.
If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port
R
R
Y
RedRed WhiteRedBlue Green Yellow
White
G
W R
Y
G
WRWR
Y
properly.
English
8
[UC4000_19]BN68-02655H-RU.indb 8 2010-04-05 오후 1:35:53
Connecting to an Audio Device
USB
USB
Using an Optical (Digital) or Headphone Connection
Available devices: digital audio system, amplifier, DVD home theatre
OPTICAL
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
x
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the
x
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
Headphones : You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.
Sound function may be restricted when connecting headphones to the TV.
x
Headphone volume and TV volume are adjusted separately.
x
02 Connections
digital audio system
English
[UC4000_19]BN68-02655H-RU.indb 9 2010-04-05 오후 1:35:53
9
Connections
CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
y If you don’t insert the “CI or CI+ CARD,” some channels will
display the message “Scrambled Signal”.
y The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
y When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the channel list is updated.
NOTE
You must obtain a “CI or CI+ CARD” from a local cable service provider.
x
When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
x
cause damage to it.
Insert the “CI or CI+ CARD” in the direction marked on the card.
x
The location of the COMMON INTERFACE slot may be dif ferent depending on the model.
x
“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the “CI or CI+ CARD” that suppor ts the current antenna settings. The screen will be distorted or will not be
x
seen.
Changing the Input Source
Source List
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.
TV / Ext. / PC / AV / Component /
HDMI1/DVI / HDMI2 / USB
In the Source List, connected inputs will be highlighted.
Ext. and PC always stay activated.
SOURCE
Edit Name
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make your input source selection easier.
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set to DVI PC or
DVI Devices mode under Edit Name.
English
10
[UC4000_19]BN68-02655H-RU.indb 10 2010-04-05 오후 1:35:54
Basic Features
C
H LIST
MUTE
P
OWER
SOURCE
O
N/OF
F
P
RE-CH
MEDIA.P
S
INFO
TTX/MIX
MENU
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
GUIDE
TOOL
1
RETURN
The main menu options appear on the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button. Press ENTER to access the
sub-menu. Select the desired submenu with
the or button. Adjust the value of an item with the
or button. The adjustment in the OSD may differ depending on the selected menu.
Press ENTER to complete the configuration.
Press EXIT.
2
1 ENTER / Direction button: Move the cursor and
select an item. Confirm the setting.
2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU
1
/ Select an icon with the or
2
ENTER
3
/
4
/
5
ENTER
6
EXIT
EXIT
7
3
4
Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video settings.
The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.
y Scroll , to view information
for a desired programme while watching the current channel.
y Scroll , to view information for other channels. If you
want to move to the currently selected channel, press the ENTER
DEF
DTV Air
15
button.
Unclass ified
No Det aild Inform ation
Life On Venus Avenu e
18:00 ~ 6:00
INFO
18:11 Thu 6 Jan
E
Watch
Informa tion
Planning Your Viewing
Guide
The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.
GUIDE
03 Basic Features
English
11
[UC4000_19]BN68-02655H-RU.indb 11 2010-04-05 오후 1:35:56
Basic Features
B
Using Channel View
Guide
800 five
Channel View - TV
Today
27 28 800 24 16 6
DTV Air 800 five
Home and Away 18:00 - 18:30
Drama
Dani is devastated when scott makes clear his views on marriage...
Discovery DiscoveryH&L five price-drop.tv QVC R4DTT
View Mode +24 Hours Ch. Mode Information  Page
18:00 - 19:00 19:00 - 20:00
American Chopper
Programmes resume at 06:00 Home and... No Information QVC Selection No Information
)
Family Affairs
Tine Team
Fiv...
)
1 2 3 4 5 6
Using Scheduled View
Guide
)
Family Affairs
)
Dark Angel
View Mode Information
1 4 6
button again and
800 800
DTV Air 800 five
Family Affairs 18:00 - 18:30
Drama
800 five
Scheduled View
18:30
Today
18:30
Today
19:15
19:15
1
Red (View Mode): View the list of programmes that
Tanya confesses all to a stunned Babs. Conrad is anxious to hear...
are playing now or coming up.
2
Yellow (+24 Hours): Viewing the list of programmes to
be broadcasted after 24 hours.
3
Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. (All, TV, Radio, Data/Other, My Channel 1~4)
4 Information: Displays details of the selected
programme.
5
(Page): Move to next or previous page.
6 ENTER
button
− When selecting the current programme, you can watch the selected programme.
− When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTER select Cancel Schedules.
2:10 Tue 1 Jun
Dark Angel

Watch
2:10 Tue 1 Jun
five five

Cancel
Channel Manager
Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the Channels, My Channels or Scheduled screen.
Channels
All
TV
Radio Data/Other Analogue
Air Antenna B Zoom Select Sort  Page
Channels: Shows the channel list according to
channel type.
My Channels: Shows the group of the channel.
Scheduled: Shows all the currently reserved
programmes.
Using the colour buttons with the Channel Manager
Red (Antenna): Toggle among Air or Cable.
x
Green (Zoom): Enlarges or shrinks a channel
x
number.
Yellow (Select): Select desired channels and press
x
the Yellow button to set all the selected channels at the same time. The  mark appears to the left of the selected channels.
Blue (Sor t): Change the list ordered by channel
x
name or channel number.
(Page): Move to next or previous page.
x
(Tools): Displays the Channel Manager option
x
menu. (The options menus may differ depending on the situation.)
Channel Status Display Icons
Icons Operations
An analogue channel.
A channel selected.
A channel set as a Favourite.
A programme currently being broadcast.

A locked channel.
A reserved programme.
c 1 1futech 2 * 24ore.tv
15 abc1
3 BBC World 23 bid-up.tv 33 Boonerang 32 Cartoon Nwk
5 Class News 4 \ Coming Soon 27 Discovery

r
Tools
English
12
[UC4000_19]BN68-02655H-RU.indb 12 2010-04-05 오후 1:35:58
Using Favourite Channels
My Channels
(in Channel Manager) Shows all favourite channels.
Edit My Channels
channels to desired my channels group.
The “” symbol will be displayed and the channel will be set as a my channel.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
One or more groups can be selected.
x
3. After you have changed the settings, the channel list
for each group can be viewed in my channels.
Channels
Air Antenna B Zoom Select Sort  Page
All
TV
Radio Data/Other Analogue
: You can set the selected
c 1 1futech 2 * 24ore.tv
Edit My Channels
15 abc1
Lock
3 BBC World
Timer Viewing
23 bid-up.tv
Edit Channel Number
33 Boonerang
Delete
32 Cartoon Nwk
Select All
5 Class News 4 \ Coming Soon 27 Discovery

Tools
Channel List
You can see all the channels searched.
CH LIST
Country
03 Basic Features
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel: Change the country for digital channels
Analogue Channel: Change the country for analogue channels.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.
Antenna Source (Air / Cable): Select the antenna source to memorise.
Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.
When selecting Cable Digital & Analogue or Digital: Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all
r
channels with active broadcast stations and stores them in the TV.
If you select Quick, you can set up the Network,
Network ID, Frequency, Modulation and Symbol Rate manually by pressing the button on
the remote control.
Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.
Manual Store
Scans for a channel manually and stores in the TV.
If a channel is locked using the Child Lock function, the PIN input window appears.
Channel Menu
 Retuning Channels
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
[UC4000_19]BN68-02655H-RU.indb 13 2010-04-05 오후 1:35:59
Digital Channel: When scanning has finished, channels are updated in the channel list.
When selecting Antenna Air: Channel, Frequency, Bandwidth
When selecting Antenna Cable: Frequency, Modulation, Symbol Rate
Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required.
English
13
Basic Features
Channel mode
P (programme mode): When tuning is complete,
x
the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C (aerial channel mode) / S (cable channel mode):
x
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
 Editing Channels
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.
Edit Channel Name (analogue channels only): Assign
your own channel name.
Edit Channel Number (digital channels only): Edit the
number by pressing the number buttons desired.
 Other Features
Cable Search Option
(depending on the country) Sets additional search options such as the frequency and
symbol rate for a cable network search.
Freq.Start / Freq.Stop: Set the start or stop frequency
(differs in each country)
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
Channel Manager
Channel Manager Option Menu
Set each channel using the Channel Manager menu options (Lock / Unlock, Timer Viewing, Sort, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
NOTE
This function is available only when the Child Lock
x
is set to On.
The PIN input screen appears. Enter your 4-digit PIN,
x
the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the current time first to use this function.
When a digital channel is selected, press the button to view the digital Programme.
Sort: (analogue channels only): This operation allows
you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Delete: You can delete a channel to display the channels
you want.
Select All / Deselect All: Select all the channels
or deselect all the selected channels in the channel manager.
Channel List Transfer
The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function.
Import from USB: Import channel list from USB.
Export to USB: Export channel list to USB. this function
is available when USB is connected.
Scheduled
(in Channel Manager) You can view, modify or delete a show you have reserved to
watch.
Change Info: Change a show you have reserved to
watch.
Cancel Schedules: Cancel a show you have reserved
to watch.
Information: Display a show you have reserved
to watch. (You can also change the reservation information.)
Select All / Deselect All: Select or deselect all reserved
programmes.
Fine Tune
(analogue channels only) If the signal is weak or distorted, fine tune the channel
manually.
Fine tuned channels are marked with an asterisk “*”.
To reset the fine-tuning, select Reset.
English
14
[UC4000_19]BN68-02655H-RU.indb 14 2010-04-05 오후 1:36:00
Picture Menu
 Changing the Picture Options
03 Basic Features
 Changing the Preset Picture Mode
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright
room.
Standard: Suitable for a normal
environment.
Movie: Suitable for watching
movies in a dark room.
P.MODE
 Adjusting Picture Settings
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
In analogue TV, Ext., AV modes of the PAL system,
x
the Tint (G/R) function is not available.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each
x
external device connected to the TV.
 Economical Solutions
Eco Solution
■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto)
the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.
No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.
Disabled when the PC is in power saving mode.
: This adjusts the brightness of
Advanced Settings
(available in Standard / Movie mode) You can adjust the detailed setting for the screen including
colour and contrast.
In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off
Dynamic Contrast : Medium
Shadow Detail : -2
Gamma : 0
RGB Only Mode : Off
Colour Space : Native
White Balance
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
Shadow Detail (-2~+2): Increase the brightness of dark
images.
Gamma: Adjust the primary colour intensity.
RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint (G/R) of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).
Colour Space (Auto / Native): Adjust the range of colours available to create the image.
White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object boundaries.
Move

Enter

Return
English
15
[UC4000_19]BN68-02655H-RU.indb 15 2010-04-05 오후 1:36:01
Basic Features
Picture Options
In PC mode, you can only make changes to the Colour Tone, Size and Auto Protection Time.
Picture Options
Colour Tone : Normal
Size : Auto Wide
Screen Mode : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Colour Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
Settings can be adjusted and stored for each external device connected to an input on the TV.
Size: Your cable box/satellite
receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using , buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
Adjusts the Position or Size by using , button.
4:3 : The default setting for a movie or normal broadcasting.
Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Move

Enter

Return
P.SIZE
NOTE
Depending on the input source, the picture size
x
options may vary.
The available items may differ depending on the
x
selected mode.
In PC mode, only 16:9 and 4:3 modes can be
x
adjusted.
Settings can be adjusted and stored for each
x
external device connected to an input on the TV.
After selecting Screen Fit in HDMI (1080i / 1080p)
x
or Component (1080i / 1080p) mode: Adjusts the Position or Size by using , ▼, , button.
If you use the Screen Fit function with HDMI 720p
x
input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.
Not available in PC, Component or HDMI mode.
Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter.
Only available for analogue channels.
MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.
HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
English
16
[UC4000_19]BN68-02655H-RU.indb 16 2010-04-05 오후 1:36:01
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
 Setting up the TV with Your PC
Sound Menu
03 Basic Features
 Changing the Preset Sound Mode
Set the input source to PC.
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.
Position: Adjust the PC screen position with direction
button ( / / / ).
Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
y The correct size setting (resolution) [Optimum: 1360 x
768 pixels]
y If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Mode
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
S.MODE
 Adjusting Sound Settings
Equalizer
Adjusts the sound mode (standard sound mode only).
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
 Sound Systems, Etc.
Virtual Surround (Off / On)
(standard sound mode only) This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.
Dialog Clarity (Off / On)
(standard sound mode only) This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can be heard more clearly.
English
17
[UC4000_19]BN68-02655H-RU.indb 17 2010-04-05 오후 1:36:02
Basic Features
Audio Language
(digital channels only) Change the default value for audio languages.
The available language may differ depending on the broadcast.
Audio Format
(digital channels only) When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable.
Audio Description
(not available in all locations) (digital channels only)
This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.
Audio Description (Off / On): Turn
the audio description function on or off.
Volume: Adjust the audio description volume.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
When Speaker Select is set to External Speaker
TV Speaker: Off, External Speaker: On
x
AD
When Speaker Select is set to TV Speaker
TV Speaker: On, External Speaker: On
x
If there is no video signal, both speakers will be mute.
Additional Setting
(digital channels only)
DTV Audio Level (MPEG / HE-AAC): This function
allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.
Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.
Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).
Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
English
18
[UC4000_19]BN68-02655H-RU.indb 18 2010-04-05 오후 1:36:02
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
 Selecting the Sound Mode
When you set to Dual -, the current sound mode is displayed on the screen.
DUAL
Time Zone (depending on the country): Select your time zone.
When Country is set to Others, you can use this function.
This function is only available when the Clock
Mode is set to Auto.
 Using the Sleep Timer
03 Basic Features
Audio
Type
A2
Stereo
NICAM Stereo
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
Only activated in stereo sound signal.
Only available when the Input source is set to T V.
Mono Mono
Stereo
Dual
Mono Mono
Stereo
Dual
Dual -
Stereo Mono
Dual
Dual
Mono Stereo
Mono Dual
Dual
Automatic
change
Automatic
change
Setup Menu
 Setting the Time
Time
Clock: Setting the clock is for using various timer features of the TV.
The current time will appear every time you press the INFO button.
If you disconnect the power cord, you have to set the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
The antenna must be connected in order to set the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute manually.
Available only when Clock Mode is set to Manual.
Default
Dual
Dual
Sleep Timer
after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
To cancel Sleep Timer, select Off.
: Automatically shuts off the TV
 Setting the On / Off Timer
Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time
Inactivate
Off Time
Inactivate
Volume
10 TV ATV 1
Repeat
Once
On Time / Off Time: Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.)
Volume: Set the desired volume level. Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the
desired channel. Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
NOTE
If there is no music file on the USB device or the
x
folder containing a music file is not selected, the Timer function does not operate correctly.
When there is only one photo file in the USB
x
device, the Slide Show will not play.
If a folder name is too long, the folder cannot be
x
selected.
Each USB you use is assigned its own folder.
x
When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
Timer 1
00 00
00 00
Source Antenna Channel
Sun Mon Tue Wed Thu Fri Sat
Move

Adjust

Enter

Return
English
19
[UC4000_19]BN68-02655H-RU.indb 19 2010-04-05 오후 1:36:04
Basic Features
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to activate the timer.
The  mark indicates the day is selected.
Auto Power Off (available only when the TV is turned on by Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
 Locking Programmes
Security
The PIN input screen appears before the setup screen.
Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.
Child Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme.
Available only when the Input source is set to TV.
Parental Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If the selected channel is locked, the “ will be displayed.
Allow All: Unlock All TV ratings.
Change PIN: Change your personal ID number required to set up the TV.
If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off)
MUTE 8 2 4 POWER (on).
 Other Features
” symbol
Preference (Primary Audio Language / Secondary
Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select
a language, which will be the default language when a channel is selected.
Subtitle
Use this menu to set the Subtitle mode.
Subtitle (Off / On): Switches
subtitles on or off.
Mode (Normal / Hearing Impaired): Sets the subtitle mode.
Subtitle Language: Sets the subtitle language.
If the programme you are watching does not support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected.
English is the default in cases where the selected language is unavailable in the broadcast.
SUBT.
Digital Text (Disable / Enable)
(UK only) If the programme broadcasts with digital text, this feature is
enabled.
Auto Run Data Service
Sets whether or not to automatically run data service. Auto Run Data Service automatically runs data service without
user intervention.
If any other secondar y function is under way, Auto Run
Data Service may not work.
Language
Menu Language: Set the menu language.
Teletext Language: Set a desired language for teletext.
English is the default in cases where the selected language is unavailable in the broadcast.
English
20
[UC4000_19]BN68-02655H-RU.indb 20 2010-04-05 오후 1:36:04
General
Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.
NOTE
Precautions and limitations for game mode
x
− To disconnect the game console and connect
another external device, set Game Mode to Off in the setup menu.
− If you display the TV menu in Game Mode, the
screen shakes slightly.
Game Mode is not available when the input source
x
is set to TV or PC.
After connecting the game console, set Game Mode
x
to On. Unfortunately, you may notice reduced picture quality.
If Game Mode is On:
x
Picture mode is set to Standard and Sound mode is set to Movie.
Equalizer is not available.
Menu Transparency (Bright / Dark): Se t the
Transparency of the menu.
Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
Common Interface
CI Menu: This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu PC Card.
Application Info: View information on the CAM inserted
into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by
phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the
direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.
Picture In Picture (PIP)
PIP
You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.
NOTE
For PIP sound, refer to the Sound Select
x
instructions.
If you turn the T V off while watching in PIP mode, the
x
PIP window will disappear.
You may notice that the picture in the PIP window
x
becomes slightly unnatural when you use the main screen to view a game or karaoke.
PIP settings
x
Main picture Sub picture Component, HDMI1/DVI,
HDMI2, PC
PIP (Off / On): Activate or deactivate the PIP function.
Channel: Select the channel for the sub-screen.
Size (
Position (
sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode.
/ ): Select a size for the sub-picture.
/  /  / ): Select a position for the
TV
Support Menu
Self Diagnosis
Self Diagnostic might take few seconds, this is part of the normal operation of the TV
Picture Test (Yes / No): Use to check for picture problems.
Sound Test (Yes / No): Use the built-in melody sound to check for sound problems.
If you hear no sound from the TV’s speakers, before per forming the sound test, make sure
Speaker Select is set to TV Speaker in the Sound menu.
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
Signal Information: (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Troubleshooting: If the TV seems to have a problem, refer to this description.
If none of these troubleshooting tips apply, contact the Samsung customer service centre.
03 Basic Features
English
21
[UC4000_19]BN68-02655H-RU.indb 21 2010-04-05 오후 1:36:05
Basic Features
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or downloading the latest firmware from “www. samsung.com,” to a USB memory device.
Current Version the software already installed in the TV.
Software is represented as “Year/Month/Day_Version”.
Software Upgrade
Current Version 2010/01/18_000001
By USB
By Channel
Standby Mode Upgrade : Off
Alternative Software 2010/01/15_00000
Move

Enter

Return
Installing the Latest Version
By USB: Insert a USB
drive containing the firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.
By Channel: Upgrade the software using the
broadcasting signal.
If the function is selected during the software transmission period, software will be automatically searched and downloaded.
The time required to download the software is determined by the signal status.
TV Rear Panel
USB
USB Drive
Standby Mode Upgrade: A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.
Alternative Software (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.
If the software was changed, existing software is displayed.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.
English
22
[UC4000_19]BN68-02655H-RU.indb 22 2010-04-05 오후 1:36:06
Advanced Features
Using an HDMI/DVI Cable or a D-sub Cable
Connecting to a PC
04 Advanced Features
AUDIO OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360 x 768 @ 60 Hz.
Mode Resolution
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
640 x 350 720 x 400
640 x 480 832 x 624
720 x 576
1280 x 720
640 x 480 640 x 480 640 x 480 800 x 600 800 x 600
800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 720 1360 x 768
1280 x 720 52.500 70.000 89.040 -/+
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
35.910
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
45.000
47.712
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
59.950
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.000
60.015
Pixel Clock Frequency
(MHz)
25.175
28.322
30.240
57.284
32.750
95.750
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
74.250
85.500
DVI OUT
Sync Polarity
(H / V)
+/-
-/+
-/-
-/-
-/+
-/+
-/-
-/-
-/­+/+ +/+ +/+
-/-
-/­+/+ +/+ +/+
NOTE
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x
The interlace mode is not suppor ted.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
English
23
[UC4000_19]BN68-02655H-RU.indb 23 2010-04-05 오후 1:36:10
Advanced Features
SUM
Media Play
MediaPlay
Videos
Change Device
View Devices
MEDIA.P
Enjoy photos, music and/or movie fi les saved on a USB Mass Storage Class (MSC) device.
 Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie fi les to the
USB (HDD)
3. When USB is connected to the TV, popup window appears. Then you can select Media Play .
It might not work properly with unlicenced multimedia files.
Need-to-Know List before using Media Play (USB)
MTP (Media Transfer Protocol) is not supported.
x
The file system supports FAT16, FAT32 and NTFS.
x
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
x
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
x
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.
Before connecting your device to the T V, please back up your files to prevent them from damage or loss of data.
x
SAMSUNG is not responsible for any data file damage or data loss.
Connect a USB HDD to the dedicated por t, USB (HDD) port.
x
Do not disconnect the USB device while it is loading.
x
The higher the resolution of the image, the longer it takes to display on the screen.
x
The maximum supported JPEG resolution is 15360X8640 pixels.
x
For unsupported or corrupted files, the “Not Suppor ted File Format” message is displayed.
x
If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
x
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
x
(DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
If more than 2 PTP devices are connected, you can only use one at a time.
x
If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
x
power (more than 500mA or 5V) may not be suppor ted.
If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
x
be recognized or may malfunction.
If the TV has been no input during time set in Auto Protection Time , the Screensaver will run.
x
The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
x
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
x
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
x
not played, connect the USB device to the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
x
to permanently delete the file.
TV Rear Panel
USB

Enter

Return
USB Drive
English
24
[UC4000_19]BN68-02655H-RU.indb 24 2010-04-05 오후 1:36:11
 Screen Display
B
Movie 01.avi
00:04:03 / 00:07:38 1/1
SUM
Move to the file you desired using the up/down/right/left buttons and then press the ENTER or  (Play) button. The file is played.
Supports the View Devices and Home in Media Play homepage.
04 Advanced Features
You can ascertain the selected
Information:
file name and the number of files
and page.
Sort List Section:
Displays sorting standard.
Sorting standard is
different depending on the contents.
Videos
SUM
Change Device
/Movie 01.avi 1/1
Movie 01.avi
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
Select Sorting
Operation Buttons
Red (Change Device): Selects a connected device. Green (Preference): Sets the file preference. (not supported in Basic view) Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol. Blue (Sorting): Selects the sort list.
Tools: Displays the option menu.
Using the  (REW) or  (FF) button, file list can move to next or previous page.
Videos
Playing Video
1. Press the or button to select Videos, then press the ENTER
2. Press the /// button to select the desired file in the file list.
3. Press the ENTER
button or  (Play) button.
− The selected file is displayed on the top with its playing time.
− If video time information is unknown, play time and progress bar are not displayed.
− During playing the video, you can search using the and button.
In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.
y Supported Subtitle Formats
Name File extension Format
MPEG-4 time-based text .ttxt XML
SAMI .smi HTML
SubRip .srt string-based
SubViewer .sub string-based
Micro DVD .sub or .txt string-based
button in the Media Play menu.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010

Tools
Page
File List Section: You can confirm the files and groups that is sorted by each category.
Pause

Jump

Tools

Return
English
25
[UC4000_19]BN68-02655H-RU.indb 25 2010-04-05 오후 1:36:12
Advanced Features
y Supported Video Formats
File Extension Container Video Codec Resolution
Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8
*.avi
*.mkv
*.asf ASF
*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA
*.mp4 MP4
*.3gp 3GPP
*.vro
*.mpg
*.mpeg
*.ts *.tp
*.trp
AVI
MKV
VRO VOB
PS
TS
XviD 1920x1080 6 ~ 30 8
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8
XviD 1920x1080 6 ~ 30 8
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
XVID 1920x1080 6 ~ 30 8
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
MPEG1 1920x1080 24 / 25 / 30 30
MPEG2 1920x1080 24 / 25 / 30 30
MPEG1 1920x1080 24 / 25 / 30 30
H.264 1920x1080 6 ~ 30 25
MPEG2 1920x1080 24 / 25 / 30 30
H.264 1920x1080 6 ~ 30 25
VC1 1920x1080 6 ~ 30 25
Frame rate
(fps)
Bit rate (Mbps)
Audio Codec
MP3 / AC3 / LPCM /
ADPCM / DTS Core
MP3 / AC3 / LPCM /
ADPCM / WMA
MP3 / ADPCM / AACMPEG4 SP / ASP 1920x1080 6 ~ 30 8
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
AC3 / MPEG / LPCM / AACMPEG2 1920x1080 24 / 25 / 30 30
AC3 / AAC / MP3 / DD+ /
HE-AAC
Other Restrictions
NOTE
If there are problems with the contents of a codec, the codec will not be supported.
x
If the information for a Container is incorrect and the file is in error, the Container will not be able to play
x
correctly.
Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
x
listed in the table above.
If the Index Table is in error, the Seek (Jump) function is not supported.
x
Video Decoder Audio Decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
• GMC is not supported.
• H.263 is not supported.
English
26
• Supports up to WMA 7, 8, 9, STD
• WMA 9 PRO does not support 2 channel excess multi channel or lossless audio.
• WMA sampling rate 22050Hz mono is not supported.
[UC4000_19]BN68-02655H-RU.indb 26 2010-04-05 오후 1:36:13
Playing movie file continuously (Resume Play)
Movie 01.avi
00:04:03 / 00:07:38 1/1
SUM
3/15
I Love you
Jhon
Music 1
No Singer
Music 2
No Singer
Music 3
No Singer
Music 4
No Singer
Music 5
No Singer
I Love You
Jhon
1st Album Pop 2010
4.2MB
01:10 / 04:02
SUM
Image1024.jpg 1024x768 2010/2/1 3/15
SUM
If you exit the playing Videos function, it can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing
the or button to select it from the file list section.
2. Press the
(Play) / ENTER button.
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
The Blue button is available when resuming play.
If the Cont. movie play help function is set to On in the Settings menu, a pop-up message will appear when you
Play continuously
Resumes playing from the last viewed scene.
resume play a movie file.
Play continuously

Pause

Jump
Music
Playing Music
1. Press the or button to select Music, then press the
ENTER
button in the Media Play menu.
2. Press the /// button to select the desired file in the file
list.
3. Press the ENTER
button or  (Play) button.
− During playing the music, you can search using the and
button.
(REW) and  (FF) buttons do not function during play.
Only displays the files with MP3 and PCM file extension. Other file extensions are not displayed, even if they are saved on the
same USB device.
If the sound is strange when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)
Pause

Playlist
Jump


Tools
Tools
04 Advanced Features

Return

Return
Photos
Viewing a Photo (or Slide Show)
1. Press the or button to select Photos, then press the
ENTER
button in the Media Play menu.
2. Press the /// button to select the desired file in the file
list.
3. Press the ENTER
− While a photo list is displayed, press the
button or  (Play) button.
(Play) /
ENTER button on the remote control to start slide show.
− All files in the file list section will be displayed in the slide show.
− During the slide show, files are displayed in order from currently being shown.
Music files can be automatically played during the Slide Show if the Background Music is set to On.
The BGM Mode cannot be changed until the BGM has finished loading.
[UC4000_19]BN68-02655H-RU.indb 27 2010-04-05 오후 1:36:15
Normal
Pause

Previous/Next

Tools
English

Return
27
Advanced Features
1/1
/Movie 01.avi
SUM
Movie 01.avi
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Playing the Multiple Files
Playing the selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
Videos
2. Repeat the above operation to select multiple files.
NOTE
The  mark appears to the left of the selected files.
x
To cancel a selection, press the Yellow button again.
x
To deselect all selected files, press the TOOLS button
x
and select Deselect All.
3. Press the TOOLS button and select Play Selected Contents.
Playing the video/music/photo file group
Change Device
1. While a file list is displayed, move to the any file in desired group.
2. Press the TOOLS button and select Play Current Group.
 Media Play Additional Function
Sorting the file list
Press the Blue button in the file list to sort the files.
Category Operations Videos Music Photos
Basic View
Title
Preference
Latest Date
Earliest Date
Artist
Album
Genre
Mood
Monthly
Anynet+
It shows whole folder. You can view the photo by selecting the folder.
It sorts and displays the file title in Symbol/Number/Alphabet/Special order.
It sorts and displays the file by preference. You can change the file preference in the file list section using the Green button.
It sorts and shows files by latest date.
It sorts and shows files by earliest date.
It sorts the music file by artist in alphabetical.
It sorts the music file by album in alphabetical order.
It sorts music files by the genre.
It sorts music files by the mood. You can change the music mood information.
It sorts and shows photo files by month. It sorts only by month (from January to December) regardless of year.
2 les selected Page
Select Sorting

Tools
28
[UC4000_19]BN68-02655H-RU.indb 28 2010-04-05 오후 1:36:17
English
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category Operations Videos Music Photos
Title You can move the other file directly.
Repeat Mode You can play movie and music files repeatedly.
Picture Size You can adjust the picture size for preference.
Picture Setting You can adjust the picture setting (p. 15, 16, 17).
Sound Setting You can adjust the sound setting (p. 17, 18, 19).
Subtitle Setting You can play the video file with Subtitle. This function only works if the subtitles are
Stop Slide Show / Start Slide Show
Slide Show Speed You can select the slide show speed during the slide show.
Background Music You can set and select background music when watching a slide show.
Zoom You can zoom into images in full screen mode.
Rotate You can rotate images in full screen mode.
Information You can see detailed information about the played file.
the same file name as the video file.
You can start or stop a slide show.
      
   
Settings
Using the Setup Menu
Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD registration using Media Play, the registration is completed.
For more information on DivX® VOD, visit “www.DivX.com.”
Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
Information: Select to view information about the connected device.
04 Advanced Features
English
29
[UC4000_19]BN68-02655H-RU.indb 29 2010-04-05 오후 1:36:18
Advanced Features
Anynet+
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
1. Connect the HDMI IN (1(DVI) or 2) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
NOTE
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your T V and the Digital Audio Input
x
on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
x
the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.
Connect only one Home Theatre.
x
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
x
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
x
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
x
TV Rear Panel
Anynet+
Device 1
HDMI Cable
Anynet+ Device 2
HDMI Cable
Home Theatre
HDMI Cable
Optical Cable
English
30
[UC4000_19]BN68-02655H-RU.indb 30 2010-04-05 오후 1:36:19
Loading...
+ 139 hidden pages