Samsung UD55D, UD46C, UD55C User Manual
LFD DISPLAY
User Manual
The colour and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
UD55D
BN46-00372A-01
Table of contents
Before Using the Product
Copyright 6
Safety Precautions 7
Symbols 7
Cleaning 7
Storage 8
Electricity and Safety 8
Installation 9
Operation 11
Preparations
Checking the Contents 14
Removing the Packaging 14
Checking the Components 15
Parts 17
External sensor KIT 17
Reverse Side 18
Attaching the holders 19
Anti-theft Lock 19
Remote Control 20
Connection Using an IR Stereo Cable
(sold separately) 23
Before Installing the Product
(Installation Guide) 24
Tilting Angle and Rotation 24
Ventilation 24
Dimensions 25
Installing the Wall Mount 26
Preparing before installing Wall-Mount 26
Installing the Wall Mount Kit 26
Wall Mount Kit Specifications (VESA) 27
Remote Control (RS232C) 28
Cable Connection 28
Connection 31
Control Codes 32
Connecting and Using a Source
Device
Before Connecting 41
Pre-connection Checkpoints 41
Connecting to a PC 42
Connection using the D-SUB cable
(Analog type) 42
Connection using a DVI cable (Digital type) 42
Connection Using an HDMI-DVI Cable 43
Connection Using an HDMI Cable 43
Connection Using an DP Cable 43
Changing the Resolution 44
Changing the Resolution on Windows XP 44
Changing the Resolution on Windows Vista 44
Changing the Resolution on Windows 7 45
Changing the Resolution on Windows 8 45
Connecting to a Video Device 46
Connection Using the AV Cable 46
Connection Using the component Cable 46
Connection Using an HDMI-DVI Cable 47
Connection Using an HDMI Cable 47
Connecting to an Audio System 48
Connecting an External Monitor 48
Connecting the network box
(Sold separately) 49
MagicInfo 49
Changing the Input source 51
Source 51
Using MDC
Configuring Settings for Multi Control 52
Configuring settings for Multi Control 52
MDC Programme Installation/Uninstallation 53
Installation 53
Uninstallation 53
What is MDC? 54
Connecting to MDC 54
User Login 58
Auto Set ID 59
Cloning 60
Command Retry 61
Getting Started with MDC 62
Main Screen Layout 63
Menus 63
Screen Adjustment 65
2
Table of contents
Advanced features 68
Sound Adjustment 70
System Setup 70
Tool Settings 79
Other Functions 82
Group Management 83
Schedule Management 85
Troubleshooting Guide 87
Screen Adjustment
Picture Mode 89
If the input source is PC, DVI or DisplayPort 89
If the input source is AV, Component, HDMI1,
HDMI2
89
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
90
Screen Adjustment 91
Picture Size 91
Position 93
Zoom/Position 93
4:3 Screen Size 94
PC Screen Adjustment 94
Resolution Select 95
Auto Adjustment 95
Rotation 96
Aspect Ratio 96
Advanced Settings 97
Dynamic Contrast 98
Black Tone 98
Flesh Tone 98
RGB Only Mode 98
Colour Space 98
White Balance 99
10p White Balance 99
Gamma 99
Expert Pattern 100
Motion Lighting 100
Picture Options 101
Colour Tone 102
Colour Temp. 102
Digital Noise Filter 102
MPEG Noise Filter 102
HDMI Black Level 102
Film Mode 103
Calibrated value 103
Dynamic Backlight 103
Reset Picture 103
Network
Network Settings 104
Connecting to a Wired Network 104
Wired Network Settings 105
Connecting to a Wireless Network 106
Wireless Network Setting 107
WPS(PBC) 108
Network Status 109
Wi-Fi Direct 109
Soft AP 110
AllShare Settings 110
Device Name 110
System
Multi Control 111
Configuring settings for Multi Control 111
Time 112
Clock Set 112
Sleep Timer 112
On Timer 113
Off Timer 114
Holiday Management 114
Menu Language 115
Rotate menu 115
Eco Solution 116
Energy Saving 116
Eco Sensor 116
No Signal Power Off 116
Auto Power Off 116
Security 117
Safety Lock 117
Button Lock 117
3
Table of contents
Change PIN 117
PIP 118
Auto Protection Time 119
Screen Burn Protection 120
Pixel Shift 120
Timer 121
Immediate display 122
Side Grey 122
Ticker 122
Video Wall 123
Video Wall 123
Format 123
Horizontal 123
Vertical 124
Screen Position 124
Source AutoSwitch Settings 125
Source AutoSwitch 125
Primary Source Recovery 125
Primary Source 125
Secondary Source 125
General 126
Max. Power Saving 126
Game Mode 126
BD Wise 126
Menu Transparency 126
Sound Feedback 127
Auto Power 127
Standby Control 127
Lamp Schedule 128
OSD Display 128
Power On Adjustment 128
Temperature Control 128
Anynet+ (HDMI-CEC) 129
Anynet+ (HDMI-CEC) 129
Auto Turn Off 130
DivX® Video On Demand 133
Play Mode 133
Magic Clone 134
Reset System 134
Reset All 135
PC module power 135
Synced power-on 135
Synced power-off 135
Support
Software Update 136
By USB 136
Alternative Software 136
Contact Samsung 137
Contents Home 138
MagicInfo Lite 138
MagicInfo Premium S 138
MagicInfo Videowall S 138
AllShare Play 139
Source 139
AllShare Play
What is AllShare Play? 140
Read the following before using AllShare Play
with a USB device 140
Using a USB device 142
Connecting to a PC over a network 143
Using the AllShare Play features 144
Using the Basic AllShare Play Features 145
Sorting the file lists 145
Playing Selected Files 146
Copying Files 146
Creating a Playlist 146
My list 147
My list options 147
Videos 148
Playing a Video 148
Photos 149
Viewing a Photo (or Slide Show) 149
Music 150
Playing Music 150
Videos / Photos / Music Play Option menu 151
Supported Subtitle and AllShare Play file
formats 153
Subtitle 153
4
Table of contents
Supported image resolutions 153
Supported music file formats 154
Supported Video Formats 154
MagicInfo Lite
File Formats Compatible with MagicInfo Lite
player
156
Read before using MagicInfo Lite player 156
Approving a connected device from the
server 161
MagicInfo Lite 163
MagicInfo Lite player 163
Local Schedule Manager 166
Content manager 173
Settings 175
When Content is Running 177
MagicInfo Premium S
File Formats Compatible with MagicInfo
Premium S Player
179
Read before using MagicInfo Premium S Player 179
Approving a connected device from the
server 185
MagicInfo Premium S 187
MagicInfo Premium S Player 187
Local Schedule Manager 190
Template Manager 197
Content manager 200
Settings 202
When Content is Running 204
MagicInfo Videowall S
File Formats Compatible with MagicInfo
Videowall S Player
206
Read before using MagicInfo Videowall S Player 206
MagicInfo Videowall S 209
Settings 209
When Content is Running 210
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Centre 211
Testing the Product 211
Checking the Resolution and Frequency 211
Check the followings. 212
Q & A 218
Specifications
General 220
PowerSaver 223
Preset Timing Modes 224
Appendix
Contact SAMSUNG WORLD WIDE 226
Responsibility for the Pay Service
(Cost to Customers) 235
Not a product defect 235
A Product damage caused by customer's fault 235
Others 235
WEEE 236
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) 236
Correct disposal of batteries in this product 236
Optimum Picture Quality and Afterimage
Burn-in Prevention 237
Optimum Picture Quality 237
Prevention of Afterimage Burn-in 238
License 240
Terminology 241
5
6
Before Using the Product
Chapter 01
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2013 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•
An administration fee may be charged if either
-
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
-
(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
•
The amount of such administration charge will be advised to you before any work or home visit is carried out.
7
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Cleaning
―
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
―
Take the following steps when cleaning.
―
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
―
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
!
3
Wipe the product with a clean, soft and dry cloth.
•
Do not use detergents that contain alcohol, solvent or
surface-active agents.
•
Do not spray water or detergent directly on the product.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
8
Storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
―
Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be
charged).
Electricity and Safety
―
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•
An electric shock or fire may result.
Do not use multiple products with a single power socket.
•
Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
!
Insert the power plug all the way in so it is not loose.
•
An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
•
An electric shock or injury may result.
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
•
Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
•
A fire or electric shock may result.
!
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
•
A fire may result.
9
Caution
Do not disconnect the power cord while the product is being used.
•
The product may become damaged by an electric shock.
!
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•
A fire or electric shock may result.
!
Keep the power socket where the power cord is connected unobstructed.
•
The power cord must be disconnected to cut off power to the product
when an issue occurs.
•
Note that the product is not completely powered down by using only
the power button on the remote.
!
Hold the plug when disconnecting the power cord from the power socket.
•
An electric shock or fire may result.
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•
A fire may result.
!
Have a technician install the wall-mount hanger.
•
Installation by an unqualified person can result in an injury.
•
Only use approved cabinets.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•
An increased internal temperature may cause a fire.
!
Install the product at least 10cm away from the wall to allow ventilation.
•
An increased internal temperature may cause a fire.
!
Keep the plastic packaging out of the reach of children.
•
Children may suffocate.
10
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
•
The product may fall and become damaged and/or cause an injury.
•
Using the product in an area with excess vibration may damage the
product or cause a fire.
!
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•
A fire or electric shock may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
•
The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•
The product may fall and injure children.
•
As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
Caution
!
Do not drop the product while moving.
•
Product failure or personal injury may result.
Do not set down the product on its front.
•
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•
The product may fall and become damaged and/or cause an injury.
•
Install the product only on cabinets or shelves of the right size.
!
Set down the product gently.
•
Product failure or personal injury may result.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
dust, chemical substances, extreme temperatures or a significant presence
of moisture, or a place where the product will operate continuously for an
extended period of time) may seriously affect its performance.
•
Be sure to consult Samsung Customer Service Centre if you want to
install the product at such a place.
11
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
•
A fire or electric shock may result.
•
Contact Samsung Customer Service Centre for repairs.
!
Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.
•
Damage to the cord may result in a fire or electric shock.
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Centre.
•
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
•
Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Centre.
•
Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
•
The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
!
During a lightning or thunderstorm, power off the product and remove the
power cable.
•
A fire or electric shock may result.
!
Do not drop objects on the product or apply impact.
•
A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
•
Product failure, an electric shock or fire may result from a damaged
cable.
!
GAS
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
•
Product failure, an electric shock or fire may result from a damaged
cable.
12
!
Do not use or keep combustible spray or an inflammable substance near
the product.
•
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
•
An increased internal temperature may cause a fire.
100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•
Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•
Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•
Product failure, an electric shock or fire may result.
Caution
!
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
•
Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
-_-
!
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•
Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
!
Use the product at the recommended resolution and frequency.
•
Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
•
The product may fall and become damaged or cause an injury.
!
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
•
A fire or electric shock may result.
13
!
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
!
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
•
Your hand or finger may get stuck and injured.
•
Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
•
Product failure or personal injury may result.
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
•
If children have had the battery in their mouths, consult your doctor
immediately.
When replacing the battery, insert it with the right polarity (+, -).
•
Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
!
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
•
Otherwise, the batteries may be damaged or cause fire, personal injury
or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
•
The customer can return used or rechargeable batteries to a nearby
public recycling centre or to a store selling the same type of the
battery or rechargeable battery.
14
Preparations
Chapter 02
Checking the Contents
Removing the Packaging
―
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Remove the protective packaging from the box.
2
Cut the strap and open the box.
UP
UP
3
Separate the box from the product. Remove the protective packaging from the product.
―
The appearance of actual components may differ from the image shown.
4
Store the box in a dry area so that it can be used when moving the product in the future.
15
-
Contact the vendor where you
purchased the product if any
components are missing.
-
The appearance of the components and
items sold separately may differ from the
image shown.
-
A stand is not provided with the product.
To install a stand, you can purchase one
separately.
Components
―
Components may differ in different locations.
Quick setup guide Warranty card
(Not available in some
locations)
User manual MagicInfo Software CD
+
+
-
-
Batteries (P. 21)
(Not available in some locations)
Remote Control (P. 20) Power cord DP cable (P. 43)
Holder Guide (4EA)
(For Video Wall) / Screw (8EA)
Holder-Ring (4EA) / Screw (4EA)
Checking the Components
16
Items sold separately
-
The following items can be purchased
at your nearest retailer.
Wall-mount Kit Stand RS232C cable (P. 54)
DVI cable (P. 42)
HDMI-DVI cable (P. 43)
D-SUB cable (P. 42) HDMI cable (P. 43) Video cable (P. 46) Stereo cable (P.23) Component cable (P. 46)
RCA stereo cable (P. 48) RCA cable (P. 46) AV/Component adapter (P. 46) AUDIO adapter (P.46) LAN cable
Network Box
DP-DVI cable
(Used to connect a network
box)
17
Parts
External sensor KIT
―
The External sensor KIT has a remote-control sensor, a brightness sensor and
function keys. If mounting the display onto a wall, you can move the External
sensor KIT to the side of the display.
―
The colour and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
Buttons Description
Remote Control
Sensor
Aim the remote control towards this spot on the LCD Display.
―
Keep the area between the remote sensor and remote control obstacle-free.
Light sensor
Automatically detects the intensity of ambient light around a selected display and
adjusts the screen brightness.
Power indicator
Turns off in power-on mode and blinks green in power-saving mode.
POWER button
Use this button for turning the LCD Display on and off.
SOURCE button
Switches from PC mode to Video mode.
Selects the input source that an external device is connected to.
18
Reverse Side
―
The colour and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
IR
OUT
CONTROL IN
DP IN HDMI IN 1
HDMI IN 2
DVI IN
(MAGICINFO)
AV /
COMPONENT
AUDIO
OUT
IN
RJ 45
RS232C OUT
RS232C OUTRS232C OUTRS232C OUTRS232C OUTRS232C IN
RGB IN
USB
DP OUT
(LOOPOUT)
Port Description
IR OUT
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
CONTROL IN
Supplies power to the external sensor board or receives the light sensor signal.
DP IN
Connects to a PC using a DP cable.
HDMI IN 1, HDMI IN 2
Connects to a source device using an HDMI cable.
DP OUT (LOOPOUT)
Connects to another product using a DP cable.
DVI IN (MAGICINFO)
Connects to a source device using a DVI cable or DP-DVI cable.
RGB IN
Connects to a source device using a D-SUB cable.
AV IN / COMPONENT IN
Connects to a source device using the AV/Component adapter.
AUDIO OUT
Connects to the audio of a source device.
AUDIO IN
Receives sound from a PC via an audio cable.
RJ45
Connects to MDC using a LAN cable.
USB
Connect to a USB memory device.
RS232C OUT
Connects to MDC using an RS232C cable.
RS232C IN
19
Attaching the holders
―
Fix the holders into on the back of the product using the screws.
―
When displays are connected to form a video wall, the holders will make the gap between displays
uniform on all four sides.
Anti-theft Lock
―
An anti-theft lock allows you to use the product securely even in public places.
―
The locking device shape and locking method depend on the manufacturer. Refer to the user guide
provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
-
An anti-theft locking device can be purchased separately.
-
Refer to the user guide provided with your anti-theft locking device for details.
-
Anti-theft locking devices can be purchased at electronics retailers or online.
20
-
Remote control button functions may
differ for different products.
Remote Control
―
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
―
A button without a description in the image below is not supported on the product.
MENU
OFF
VOL
CH
CONTENT
(HOME)
MagicInfo
Lite/S
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
DEL-/--
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
SOURCE
BLANK
Power off the product.
Number buttons
Enter the password in the OSD menu.
Mute the sound.
Unmuting the sound: Press MUTE again or press
the volume control(+ VOL -) button.
Contents Home Launch Button.
Temporarily turn off the video and mute the
audio.
Disabling the BLANK function
- Press BLANK one more time.
- Press SOURCE.
- Turn the product off and then on again.
Display or hide the onscreen display menu, or
return to the previous menu.
Power on the product.
Adjust the volume.
Change the input source.
MagicInfo Lite, MagicInfo Premium S,
MagicInfo Videowall S Launch Button.
The buttons can vary according to the
Play Mode settings.
21
TOOLS INFO
Magicinfo
3D
LOCK
PCADVIBHDMICDP
D
EXITRETURN
Display information about the current input
source.
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source from
PC, DVI, HDMI, or DP.
It sets safe lock function.
Use these buttons in Videos, Photos, Music and
Anynet+ modes.
Quickly select frequently used functions.
Return to the previous menu.
MagicInfo Quick Launch Button.
This button is disabled for products
that do not support MagicInfo.
MagicInfo can only be enabled
when a network box is connected.
-
Remote control button functions may
differ for different products.
To place batteries in the remote control
22
Adjusting the OSD with the Remote Control
Buttons Description
1
Open the OSD menu.
2
Select from Picture, Network, System or Support in
the displayed OSD menu screen.
3
Change settings as desired.
4
Finish setting.
5
Close the onscreen display (OSD) menu.
Remote Control Reception Range
30˚
30˚
7m-10m
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the
left and right.
―
Store used batteries out of reach of children and recycle.
―
Do not use a new and used battery together. Replace both batteries at the same time.
―
Remove batteries when the remote control is not to be used for an extended period of time.
23
Connection Using an IR Stereo Cable
(sold separately)
―
Turn off the device before connecting the External Sensor Kit. After it is
connected, turn on the device.
Controlling more than one display product using
your remote control
•
Connect the IR OUT port on the product to the IR / AMBIENT SENSOR IN
port on the other display product using the dedicated stereo cable.
•
A command sent from the remote control pointed at product
1
will be
received by both display products
1
and 2.
―
The appearance may differ depending on the product.
1 2
CONTROL IN
IR OUT
Controlling more than one display product using an
external sensor kit
•
A command sent from the remote control pointed at product
1
(to which the external sensor kit is connected) will be received by both
display products
1
and 2.
―
The appearance may differ depending on the product.
1 2
IR OUT CONTROL IN
CONTROL IN
POWER
SOURCE
24
Before Installing the Product
(Installation Guide)
15 ˚
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•
Ensure that an authorized installation company installs the wall mount.
•
Otherwise, it may fall and cause personal injury.
•
Make sure to install the specified wall mount.
Tilting Angle and Rotation
―
Contact Samsung Customer Service Centre for further details.
•
The product can be tilted at a maximum angle of 15
from a perpendicular wall surface.
•
To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
A
B
Figure 1.1 Side view
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35
C
•
When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface
for ventilation and ensure that the ambient A temperature is kept below 35
C.
25
A
B
C
E
Figure 1.3 Top view
D D
Figure 1.2 Side view
Installation on an Indented Wall
―
Contact Samsung Customer Service Centre for further details.
Plane view
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35
C
―
When installing the product on an indented wall, allow at least the space specified above between the product and wall for
ventilation and ensure that the ambient temperature is kept below 35
C.
Dimensions
1
2
3
4
5
Unit: mm (inches)
Model name
1
2
3 4
5
UD55D 1213.5 (47.8) 1209.6 (47.6) 680.4 (26.8) 684.3 (26.9) 96.6 (3.8)
―
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.
26
Installing the Wall Mount
1
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring(1).
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
wall mount on your own.
27
Wall Mount Kit Specications (VESA)
―
Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please contact
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe
personal injury.
•
Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•
Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
•
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
•
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•
Do not mount the product at more than a 15 degree tilt.
•
Always have two people mount the product on a wall.
•
Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name VESA screw hole
specs (A * B) in
millimeters
Standard Screw Quantity
UD55D 600 × 400 (23.6 × 15.7) M8 4
―
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
28
Remote Control (RS232C)
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
•
Pin assignment
1 2 3 4 5
6 7 8 9
Pin Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
29
•
RS232C cable
Connector: 9-Pin D-Sub
Cable: Cross cable
1
5
1
59
6
9
6
-P1- -P2-
-P1- -P1- -P2- -P2-
Female Rx
Tx
Gnd
2
3
5
-------->
<--------
----------
3
2
5
Tx
Rx
Gnd
Female
LAN Cable
•
Pin assignment
1 2 3 4 5 6 7 8
Pin No Standard Colour Signal
1 White and orange TX+
2 Orange TX-
3 White and green RX+
4 Blue NC
5 White and blue NC
6 Green R X-
7 White and brown NC
8 Brown NC
30
•
Connector : RJ45
Direct LAN cable (PC to HUB)
RJ45 MDC RJ45 MDC
HUB
P1
P1P2
P2
Signal
P1 P2 Signal
TX+
1 <--------> 1 T X+
TX-
2 <--------> 2 T X-
RX+
3 <--------> 3 RX+
RX-
6 <--------> 6 R X-
Cross LAN cable (PC to PC)
RJ45 MDC
P1 P2
Signal
P1 P2 Signal
TX+
1 <--------> 3 RX+
TX-
2 <--------> 6 R X-
RX+
3 <--------> 1 T X+
RX-
6 <--------> 2 T X-
Loading...