Samsung UD46D-P User Manual

LFD DISPLAY

User Manual

UD46D-P

The colour and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.

Table of contents

Before Using the Product

» Copyright

» Safety Precautions

Preparations

» Parts

» Before Installing the Product (Installation Guide)

» Dimensions

» Installing the Wall Mount

Connecting and Using a Source Device

» Before Connecting

» Connecting to a PC

» Connecting to a Video Device

» Connecting to an Audio System

» Connecting the LAN Cable

» Connecting the network box (Sold separately)

» Changing the Input source

Using MDC

» MDC Programme Installation/Uninstallation

» Connecting to MDC

Home feature

» Player

» Schedule

» Template

» Clone Product

» ID Settings

» Video Wall

» Network Status

» Picture Mode

» On/Off Timer

» Ticker

» More settings

» URL Launcher

Screen Adjustment

» Picture Mode

» Backlight / Contrast / Brightness / Sharpness / Colour /

Tint (G/R)

» Colour Temperature

» White Balance

» Gamma

» Calibrated value

» Advanced Settings

» Picture Options

» Picture Size

» Auto Adjustment

» PC Screen Adjustment

» Picture Off

» Reset Picture

OnScreen Display

» PIP

» Rotation

» Screen Protection

» Message Display

» Menu Transparency

» Menu Language

» Reset OnScreen Display

Table of contents

Sound Adjustment

» Sound Mode

» Sound Effect

» HDMI Sound

» Sound on Video Call

» Speaker Settings

» Auto Volume

» Reset Sound

Network

» Network Status

» Network Settings

» Wi-Fi Direct

» Multimedia Device Settings

» Server Network Settings

» Device Name

System

» Setup

» Time

» Auto Source Switching

» Power Control

» Eco Solution

» Temperature Control

» Device Manager

» Play via

» Change PIN

» General

» Reset System

Support

» Software Update

» Contact Samsung

» Go to Home

» Reset All

Playing photos, videos and music
(Media Play)

» Features provided in the media content list page

» Available buttons and features during photo playback

» Available buttons and features during video playback

» Available buttons and features during music playback

» Supported Subtitle and Media play file formats

Troubleshooting Guide

» Requirements Before Contacting Samsung Customer

Service Centre

» Q & A

Specifications

» General

» PowerSaver

» Preset Timing Modes

Appendix

» Responsibility for the Pay Service

(Cost to Customers)

» WEEE

» Optimum Picture Quality and Afterimage Burn-in

Prevention

» Licence

» Terminology

Before Using the Product

Copyright

The contents of this manual are subject to change without notice to improve quality.

© 2014 Samsung Electronics

Samsung Electronics owns the copyright for this manual.

Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.

Microsoft, Windows are registered trademarks of Microsoft Corporation.

VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

Ownership of all other trademarks is attributed to their due owner.

•

An administration fee may be charged if either

-

(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).

-

(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).

•

The amount of such administration charge will be advised to you before any work or home visit is carried out.

Safety Precautions

Caution

RISK OF ELECTRIC SHOCK DO NOT OPEN

Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)

THERE ARE NO USER SERVICEABLE PARTS INSIDE.

REFER ALL SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside.

It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.

Symbols

Cleaning

―

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.

―

Take the following steps when cleaning.

―

The following images are for reference only. Real-life situations may differ from what is shown in the

images.

Power off the product and computer.

1

Disconnect the power cord from the product.

2

―

Hold the power cable by the plug and do not touch the cable with wet

hands. Otherwise, an electric shock may result.

Wipe the product with a clean, soft and dry cloth.

3

•

Do not use detergents that contain alcohol, solvent or
surface-active agents.

!

•

Do not spray water or detergent directly on the product.

Warning

A serious or fatal injury may result if instructions are not followed.

Caution

Personal injury or damage to properties may result if instructions are not followed.

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

Wet a soft and dry cloth in water and wring thoroughly to clean the

4

exterior of the product.

Connect the power cord to the product when cleaning is finished.

5

Power on the product and computer.

6

Storage

Due to the characteristics of high-glossy products, using a UV humidifier nearby may create
white-coloured stains on the product.

―

Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be

charged).

Electricity and Safety

―

The following images are for reference only. Real-life situations may differ from what is shown in the

images.

Warning

Do not use a damaged power cord or plug, or a loose power socket.

•

An electric shock or fire may result.

Do not use multiple products with a single power socket.

•

Overheated power sockets may cause a fire.

Connect the power plug to a grounded power socket
(type 1 insulated devices only).

•

An electric shock or injury may result.

!

Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.

•

Damage to the cord may result in a fire or electric shock.

Do not place the power cord or product near heat sources.

•

A fire or electric shock may result.

Clean any dust around the pins of the power plug or the power socket with
a dry cloth.

•

A fire may result.

!

Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.

Insert the power plug all the way in so it is not loose.

•

An unsecure connection may cause a fire.

!

Caution

!

!

!

Do not disconnect the power cord while the product is being used.

•

The product may become damaged by an electric shock.

Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.

•

A fire or electric shock may result.

Keep the power socket where the power cord is connected unobstructed.

•

The power cord must be disconnected to cut off power to the product
when an issue occurs.

•

Note that the product is not completely powered down by using only
the power button on the remote.

Hold the plug when disconnecting the power cord from the power socket.

•

An electric shock or fire may result.

Installation

Warning

!

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

•

A fire may result.

Have a technician install the wall-mount hanger.

•

Installation by an unqualified person can result in an injury.

•

Only use approved cabinets.

Do not install the product in poorly ventilated spaces such as a bookcase or
closet.

•

An increased internal temperature may cause a fire.

Install the product at least 10cm away from the wall to allow ventilation.

•

An increased internal temperature may cause a fire.

!

Keep the plastic packaging out of the reach of children.

•

Children may suffocate.

!

Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)

•

The product may fall and become damaged and/or cause an injury.

•

Using the product in an area with excess vibration may damage the
product or cause a fire.

Caution

Do not drop the product while moving.

•

Product failure or personal injury may result.

Do not install the product in a vehicle or a place exposed to dust, moisture

!

(water drips, etc.), oil, or smoke.

•

A fire or electric shock may result.

!

Do not set down the product on its front.

•

The screen may become damaged.

Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.

•

The product lifespan may be reduced or a fire may result.

Do not install the product within the reach of young children.

•

The product may fall and injure children.

•

As the front is heavy, install the product on a flat and stable surface.

Edible oil, such as soybean oil, can damage or deform the product. Do not

!

When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.

•

The product may fall and become damaged and/or cause an injury.

•

Install the product only on cabinets or shelves of the right size.

Set down the product gently.

•

Product failure or personal injury may result.

install the product in a kitchen or near a kitchen counter.

Installing the product in an unusual place (a place exposed to a lot of fine
dust, chemical substances, extreme temperatures or a significant presence
of moisture, or a place where the product will operate continuously for an

SAMSUNG

!

extended period of time) may seriously affect its performance.

•

Be sure to consult Samsung Customer Service Centre if you want to
install the product at such a place.

Operation

Warning

Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.

•

The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.

There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.

•

A fire or electric shock may result.

•

Contact Samsung Customer Service Centre for repairs.

!

During a lightning or thunderstorm, power off the product and remove the
power cable.

•

A fire or electric shock may result.

Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.

•

Otherwise, the power cord may be damaged and a fire or electric

Do not drop objects on the product or apply impact.

•

A fire or electric shock may result.

shock may result.

!

!

If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Centre.

•

An electric shock or fire may result.

!

Do not move the product by pulling the power cord or any cable.

•

Product failure, an electric shock or fire may result from a damaged
cable.

Do not let children hang from the product or climb on top of it.

•

Children may become injured or seriously harmed.

!

GAS

If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.

•

Sparks can cause an explosion or fire.

If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Centre.

•

Continued use can result in a fire or electric shock.

Do not lift or move the product by pulling the power cord or any cable.

•

Product failure, an electric shock or fire may result from a damaged
cable.

Do not use or keep combustible spray or an inflammable substance near
the product.

•

An explosion or fire may result.

Caution

Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.

!

Ensure the vents are not blocked by tablecloths or curtains.

•

An increased internal temperature may cause a fire.

!

•

Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.

Disconnect the power cord from the power socket if you do not plan on

-_-

100

Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).

•

Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.

!

using the product for an extended period of time (vacation, etc).

•

Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.

Use the product at the recommended resolution and frequency.

•

Your eyesight may deteriorate.

Then contact Samsung Customer Service Centre.

•

Product failure, an electric shock or fire may result.

!

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.

•

Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.

•

Product failure, an electric shock or fire may result.

Do not hold the product upside-down or move it by holding the stand.

•

The product may fall and become damaged or cause an injury.

Looking at the screen too close for an extended period of time can
deteriorate your eyesight.

!

Do not use humidifiers or stoves around the product.

•

A fire or electric shock may result.

Rest your eyes for more than 5 minutes for every 1 hour of product use.

•

Eye fatigue will be relieved.

!

Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.

•

If children have had the battery in their mouths, consult your doctor
immediately.

Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.

When replacing the battery, insert it with the right polarity (+, -).

•

Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.

Store small accessories out of the reach of children.

Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.

•

Otherwise, the batteries may be damaged or cause fire, personal injury

!

!

Exercise caution when adjusting the product angle or stand height.

•

Your hand or finger may get stuck and injured.

•

Tilting the product at an excessive angle may cause the product to fall

!

and an injury may result.

!

or damage due to a leakage of the internal liquid.

The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.

•

The customer can return used or rechargeable batteries to a nearby
public recycling centre or to a store selling the same type of the
battery or rechargeable battery.

Do not place heavy objects on the product.

•

Product failure or personal injury may result.

When using headphones or earphones, do not turn the volume too high.

•

Having the sound too loud may damage your hearing.

Preparations

-

Contact the vendor where you
purchased the product if any
components are missing.

-

The appearance of the components and
items sold separately may differ from the
image shown.

-

A stand is not provided with the product.
To install a stand, you can purchase one
separately.

Checking the Components

Components

―

Components may differ in different locations.

Warranty card

Quick Setup Guide

(Not available in some
locations)

Regulatory guide

-

-

+

+

Batteries

(Not available in some locations)

Remote Control Power cord DP cable

Holder-Ring (4EA) / Screw (4EA)

Holder (1EA) / Half holder (1EA)
(for video wall) / Screws (8EA)

-

The following items can be purchased
at your nearest retailer.

Items sold separately

Wall-mount Kit Stand RS232C-Stereo cable DVI cable HDMI-DVI cable

D-SUB cable HDMI cable Video cable Stereo cable Component cable

RCA stereo cable RCA cable AV/Component adapter AUDIO adapter LAN cable

Network Box

DP-DVI cable

(Used to connect a network
box)

Samsung Wireles LAN Adapter Magic Presenter

Parts

―

The External sensor KIT has a remote-control sensor, a brightness sensor and function keys. If mounting the display onto a

wall, you can move the External sensor KIT to the side of the display.

―

The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to

improve quality.

External sensor KIT

POWER

Buttons Description

Remote Control

Sensor

Light sensor

ON

Use the remote control within 7m to 10m from the sensor on the product at an angle of 30

―

Store used batteries out of reach of children and recycle.

―

Do not use a new and used battery together. Replace both batteries at the same time.

―

Remove batteries when the remote control is not to be used for an extended period of time.

Power indicator

POWER button

SOURCE button

Aim the remote control towards this spot on the LCD Display.

―

Keep the area between the remote sensor and remote control obstacle-free.

Automatically detects the intensity of ambient light around a selected display and
adjusts the screen brightness.

Turns off in power-on mode and blinks green in power-saving mode.

Use this button for turning the LCD Display on and off.

Switches from PC mode to Video mode.

Selects the input source that an external device is connected to.

from the left and right.

Reverse Side

Port Description

―

The colour and shape of parts may differ from what is shown. Specifications are

subject to change without notice to improve quality.

OUT

IR

RS232C OUT

CONTROL IN

DP IN HDMI IN 1

RS232C OUTRS232C OUTRS232C OUTRS232C OUT SD CARDRS232C IN

HDMI IN 2

(LOOPOUT)

DP OUT

(MAGICINFO)

DVI IN

RGB IN

COMPONENT IN

AV /

IR OUT

CONTROL IN

DP IN

HDMI IN 1, HDMI IN 2

DP OUT (LOOPOUT)

DVI IN (MAGICINFO)

RGB IN

AV / COMPONENT IN

AUDIO OUT

AUDIO IN

RJ45

USB

RS232C OUT

Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.

Supplies power to the external sensor board or receives the light sensor signal.

Connects to a PC using a DP cable.

Connects to a source device using an HDMI cable.

Connects to another product using a DP cable.

DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.

MAGICINFO: To use MagicInfo, make sure to connect the DP-DVI cable.

Connects to a source device using a D-SUB cable.

Connects to a source device using the AV/Component adapter.

Connects to the audio of a source device.

Receives sound from a PC via an audio cable.

Connects to MDC using a LAN cable.

Connect to a USB memory device.

Connects to MDC using an RS232C cable.

AUDIO

OUT

IN

USB

RJ 45

RS232C IN

SD CARD

Connect to an SD memory card.

Anti-theft Lock

―

An anti-theft lock allows you to use the product securely even in public places.

―

The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.

―

The following images are for reference only. Real-life situations may differ from what is shown in the images.

To lock an anti-theft locking device:

Fix the cable of your anti-theft locking device to a heavy object such as a desk.

1

Put one end of the cable through the loop on the other end.

2

Insert the locking device into the anti-theft lock slot at the back of the product.

3

Lock the locking device.

4

-

An anti-theft locking device can be purchased separately.

-

Refer to the user guide provided with your anti-theft locking device for details.

-

Anti-theft locking devices can be purchased at electronics retailers or online.

Remote Control

CH

DEL-/--

CH LIST

―

Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.

―

A button without a description in the image below is not supported on the product.

Power on the product.

Adjust the volume.

Change the input source.

Display or hide the onscreen display menu, or

return to the previous menu.

.QZ

1

GHI

4

PRS

7

VOL

MENU

ABC

2

JKL

5

TUV

8

SYMBOL

0

MUTE

SOURCE

HOME

POWER

OFF

DEF

3

MNO

6

WXY

9

MagicInfo

Player I

Power off the product.

Number buttons
Enter the password in the OSD menu.

Mute the sound.
Unmuting the sound: Press MUTE again or press

the volume control(+ VOL -) button.

Use this hotkey to directly access MagicInfo.
The hotkey works if the network box is

connected.

Go to Home Launch Button.

-

Remote control button functions may
differ for different products.

-

Remove batteries when the remote
control is not to be used for an extended
period of time.

-

Using other display devices in the same
space as the remote control of this
product can cause the other display
devices to be inadvertently controlled.

-

Buttons without descriptions in the image
are not supported.

Quickly select frequently used functions.

TOOLS INFO

Display information about the current input
source.

Move to the upper, lower, left or right menu, or
adjust an option's setting.

Confirm a menu selection.

Return to the previous menu.

If multiple products are connected through the

Video Wall feature, press the SET button and

enter a product ID using the number buttons.

Control the product using the remote control.

Cancel a value that has been set using the SET

button and control all connected products using

the remote control.

To place batteries in the remote control

PC

A

SET

IR control

DVI

B

UNSET

HDMI

C

LOCK

EXITRETURN

DP

Exit the current menu.

Manually select a connected input source from

PC, DVI, HDMI, or DisplayPort.

D

It sets safe lock function.

Used in Anynet+ mode and multimedia mode.

-

Remote control button functions may
differ for different products.

Connection Using an IR Stereo Cable
(sold separately)

Make sure to connect the External ambient sensor while the product is powered
off. Then, power on the product.

1 2

Controlling more than one display product using
your remote control

•

Connect the IR OUT port on the product to the CONTROL IN port on the
other display product using the dedicated stereo cable.

•

A command sent from the remote control pointed at product

1

received by both display products

―

The appearance may differ depending on the product.

and 2.

1

will be

Controlling more than one display product using an
External ambient sensor (sold separately)

•

A command sent from the remote control pointed at product
the External ambient sensor is connected) will be received by both display

products

―

The appearance may differ depending on the product.

1

and 2.

1

(to which

IR OUT CONTROL IN

1 2

CONTROL IN

IR OUT CONTROL IN

POWER

SOURCE

Before Installing the Product
(Installation Guide)

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

•

Ensure that an authorized installation company installs the wall mount.

•

Otherwise, it may fall and cause personal injury.

•

Make sure to install the specified wall mount.

Switching between portrait and landscape

―

Contact Samsung Customer Service Centre for further details.

•

To use the product in portrait orientation, rotate it clockwise.

Ventilation

Installation on a Perpendicular Wall

A

B

Figure 1.1 Side view

A Minimum 40 mm

B Ambient temperature: Under 35

•

When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface
for ventilation and ensure that the ambient A temperature is kept below 35

C

C.

Figure 1.3 Side view

B

Installation on an Indented Wall

―

Contact Samsung Customer Service Centre for further details.

A

C

E

Figure 1.2 Side view

Dimensions

1

2

D D

5

4

Plane view

A Minimum 40 mm

B Minimum 70 mm

C Minimum 50 mm

D Minimum 50 mm

E Ambient temperature: Under 35

―

When installing the product on an indented wall, allow at least the space specified above between the product and wall for

ventilation and ensure that the ambient temperature is kept below 35

Model name

UD46D-P 1022.1 (40.2) 1018.3 (40.1) 572.9 (22.6) 576.7 (22.7) 97.0 (3.8)

―

All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.

Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.

1

C

C.

Unit: mm (inches)

2

3 4

5

3

Installing the Wall Mount

Preparing before installing Wall-Mount

To install a wall-mount from another manufacturer, use the Holder-Ring.

Installing the Wall Mount

The wall mount kit (sold separately) allows you to mount the product on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount.

We recommend you contact a technician for assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
wall mount on your own.

Wall Mount Kit Specications (VESA)

―

Install your wall mount on a solid wall perpendicular to the floor. Before

attaching the wall mount to surfaces other than plaster board, please contact
your nearest dealer for additional information.

If you install the product on a slanted wall, it may fall and result in severe
personal injury.

•

Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.

•

Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.

•

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.

•

Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.

•

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.

•

Always have two people mount the product on a wall.

•

Standard dimensions for wall mount kits are shown in the table below.

Unit: mm (inches)

Model name VESA screw hole

Standard Screw Quantity
specs (A * B) in
millimeters

UD46D-P 600 × 400 (23.6 × 15.7) M8 4

―

Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.

Connecting and Using a Source Device

Before Connecting

Pre-connection Checkpoints

―

Before connecting a source device, read the user manual provided with it.

The number and locations of ports on source devices may differ from device to device.

―

Do not connect the power cable until all connections are completed.

Connecting the power cable during connection may damage the product.

―

Connect the sound ports correctly: left = white and right = red.

―

Check the types of ports at the back of the product you want to connect.

Connecting to a PC

•

Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.

•

A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.

―

Connecting parts may differ in different products.

Connection using the D-SUB cable (Analogue type)

RGB IN

AUDIO IN

Connection using a DVI cable (Digital type)

DVI IN (MAGICINFO)

AUDIO IN

Connection Using an HDMI-DVI Cable

―

When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access

video and audio content stored on the PC.

HDMI IN 1, HDMI IN 2

AUDIO IN

Connection Using an HDMI Cable

Connection Using an DP Cable

HDMI IN 1, HDMI IN 2

DP IN

•

Precautions for using DP

―

To increase the standby power capacity, the product stops DP communication when it is turned

off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode, monitor

setting changes may not be updated. As a result, screen output may not be displayed properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the product.

―

Some graphics cards that are not compliant with the DP standard may prevent the Windows

Booting/Bios screen from being displayed when the product is in power-saving mode. If this is
the case, make sure to turn on the product first before turning on your PC.

―

The DisplayPort interface (DP IN) on the product and the provided DP cable are designed based

on the VESA standards. Using a DP cable that is not VESA compliant may cause the product to
function improperly. Samsung Electronics shall not be held responsible for any issues from using
a cable that is not VESA compliant.

Make sure to use a DP cable that is VESA compliant.

Connecting to a Video Device

•

Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.

•

You can connect a video device to the product using a cable.

―

Connecting parts may differ in different products.

―

Press the SOURCE button on the remote control to change the source.

Connection Using the AV Cable

AV / COMPONENT IN

AUDIO IN

Connection Using the component Cable

AV / COMPONENT IN

AUDIO IN

Connection Using an HDMI-DVI Cable

―

Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To

resolve this, additionally connect an audio cable to the audio ports on the product and video device.
When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVI

Devices to access video and audio content stored on the video device.

―

Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.

HDMI IN 1, HDMI IN 2

AUDIO IN

Connection Using an HDMI Cable

Using an HDMI cable or HDMI to DVI Cable (up to 1080p)

•

For better picture and audio quality, connect to a digital device using an HDMI cable.

•

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

-

To connect the product to a digital device that does not support HDMI output, use an HDMI­DVI and audio cables.

•

The picture may not display normally (if at all) or the audio may not work if an external device that
uses an older version of HDMI mode is connected to the product. If such a problem occurs, ask the
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

•

Be sure to use an HDMI cable with a thickness of 14 mm or less.

•

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.

•

A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.

HDMI IN 1, HDMI IN 2

Connecting to an Audio System

Connecting the LAN Cable

―

Connecting parts may differ in different products.

AUDIO OUT

―

Connecting parts may differ in different products.

RJ45

•

Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair

Connecting the network box (Sold separately)

MagicInfo Setup Wizard - v.1.12

Select Application - step 1

MagicInfo Pro (LAN, WAN based version)

MagicInfo-i Premium (Web-based version)

Select Later

< Back(B) Next(N) > Finish Cancel

―

For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.

MagicInfo

To use MagicInfo, a network box (sold separately) must be connected to the product.

―

To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.

―

For details on how to use MagicInfo, refer to the DVD provided with the network box.

―

The information in this section is subject to change without notice for quality improvement.

―

If a problem occurs after installing an operating system other than the one provided with the network box, restoring the previous version of the operating system, or

installing software that is not compatible with the operating system provided, you will not be able to benefit from technical support and will be charged a fee for a visit
from a service technician. A product exchange or refund will also not be available.

Entering MagicInfo mode

1

2

After installing and connecting the network box (sold separately) to the product, power on the product.

Press SOURCE on the remote control, and select MagicInfo.

―

Connecting the network box to the DVI IN (MAGICINFO) port on the product will change Source from DVI to MagicInfo.

Select the default application you want to run when MagicInfo starts.

3

MagicInfo Setup Wizard - v.1.12

Select TCP/IP - step 2

Obtain an IP address automatically

Use the following IP address:

IP address:

Subnet mask:

Default gateway:

192 . 168 . 0 . 102

255 . 255 . 255 . 0

192 . 168 . 0 . 1

Obtain DNS server address automatically

Use the following DNS server address:

Preferred DNS server:

Alternate DNS server:

10 . 44 . 33 . 22

10 . 33 . 22 . 11

< Back(B) Next(N) > Finish Cancel

Enter the IP information.

MagicInfo Setup Wizard - v.1.12

Select Language -step 3

Select the language you want to install on the system for menus and
dialogs.

Current Language : Engilsh

German

English

French

Italian

Chinese [Traditional]

Japanese

Korean

Russian

Swedish

Turkish

Chinese [Simplified]

Portuguese

< Back(B) Next(N) > Finish Cancel

MagicInfo Setup Wizard - v.1.12

Select Screen Type - step 4

Landscape

Portrait

< Back(B) Next(N) > Finish Cancel

MagicInfo Setup Wizard - v.1.12

Setup Information

1. Application : MagicInfo Pro [LAN,WAN based version\

2. Internet Protocol [TCP/IP]

IP : 192.168.0.102

3. Language : English

4. Screen Type : Landscape

Do not show again

< Back(B) Apply Finish Cancel

4

Select a display mode.

6

Select a language. (The default

5

language is English.)

Double-check the settings you have

7

just configured.

―

If the execution icon does not appear,

double-click the MagicInfo icon on
the desktop. The icon will appear at the
bottom right of the screen.

Changing the Input source

Source

SOURCE → Source

Source allows you to select a variety of sources and change source device names.

You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.

―

The input source can also be changed by using the SOURCE button on the remote control.

―

The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.

―

To view detailed information about connected source devices, press the TOOLS button from the Source page.

Source

HDMI1

-

The displayed image may differ depending on the model.

HDMI2

AV DisplayPortComponent

To go to Options, press and hold the Enter button.

Edit Name

SOURCE → Source → TOOLS → Edit Name → ENTER E

PC

Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name.

In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality.

―

The list can include the following source devices. Source devices on the list differ depending on the selected source.

PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV Receiver / Camcorder / DVI PC /
DVI Devices / TV / IPTV / HD DVD / DMA

―

Available settings in the Picture menu depend on the current source and settings made in Edit Name.

•

When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV devices.

•

When connecting a PC to the HDMI IN port with HDMI cable, you should set the product to PC mode under Edit Name.

•

When connecting a PC to the HDMI IN port with HDMI to DVI cable, you should set the product to DVI PC mode under

Edit Name.

•

When connecting an AV devices to the HDMI IN port with HDMI to DVI cable, you should set the product to DVI Devices
mode under Edit Name.

Information

SOURCE → Source → TOOLS → Information → ENTER E

You can see detailed information about the selected external device.

Using MDC

Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.

For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme can be downloaded from the website.

In the displayed "Ready to Install the Program" window, check the directory path to install the

MDC Programme Installation/Uninstallation

Installation

―

MDC installation can be affected by the graphics card, mother board and network conditions.

Click the MDC Unified installation programme.

1

Select a language for installation. Next, click "OK".

2

When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".

3

In the "License Agreement" window displayed, select

4

"I accept the terms in the license agreement" and click "Next".

7

programme in and click "Install".

Installation progress will be displayed.

8

Click "Finish" in the displayed "InstallShield Wizard Complete" window.

9

―

Select "Launch MDC Unified" and click "Finish" to run the MDC programme immediately.

The MDC Unified shortcut icon will be created on the desktop after installation.

10

―

The MDC execution icon may not be displayed depending on the PC system or product

specifications.

―

Press F5 if the execution icon is not displayed.

Uninstallation

In the displayed "Customer Information" window, fill out all the information fields and click

5

"Next".

In the displayed "Destination Folder" window, select the directory path you want to install the

6

programme in and click "Next".

―

If the directory path is not specified, the programme will be installed in the default directory

path.

Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.

1

Select MDC Unified from the list and click Change/Remove.

2

Connecting to MDC

Using MDC via RS-232C (serial data communications standards)

An RS-232C serial cable must be connected to the serial ports on the PC and monitor.

Monitor 1

RS232C IN/OUT

Monitor 2

Computer

Using MDC via Ethernet

Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.

Connection using a direct LAN cable

―

Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.

RJ45 MDC

Computer

HUB

Monitor 1

Monitor 2

Connection using a cross LAN cable

―

Multiple products can be connected using the RS232C IN / OUT port on the product.

RS232C OUTRJ45 MDC

Monitor 1

Monitor 2

Computer

Home feature

This feature is provided in Support → Go to Home.

Accessible using the HOME button on the remote control.

Player

HOME → Player → ENTER E

―

To use the Player feature, set Play via to MagicInfo in System.

Play a range of content such as channels with schedules assigned, templates or files.

Play channels or content using any of the following methods.

•

Network Channel: Play content using the server.

―

To run Network Channel, make sure the product is connected to the server.

•

Local Channel: Play content in internal memory or from external memory.

Player

Play various contents sych as scheduled
channels, templates or files.

Clone Product

Picture Mode

-

The displayed image may differ depending on the model.

ID Settings

On/Off Timer

Schedule Template

Video Wall

Ticker

Network Status

More settings

Approving a connected device from the server

•

Set MagicInfo Mode to MagicInfo in Server Network Settings.
Approve and use the MagicInfo server now.

―

First configure the server Network Settings before device approval.

Access the server you have assigned to your device.

1

Enter your ID and password to log in.

2

Select Device from the top menu bar.

3

Select MagicInfo from the menus on the left.

4

Select Unapproved from the sub-menus of MagicInfo.

5

Select the Approve button for your device from the list of unapproved MagicInfo devices.

6

Enter the information required to approve the device.

7

•

Device Name: Enter the device name.

•

Device Group: Select

•

Location: Enter the current location of the device.

―

Pressing the INFO button on the remote when a network schedule is running will display the details of

the schedule. Check that the correct device has been selected by viewing the device ID in the details.

Select the All menu to check that the device has been registered.

8

to specify the group.

When the device is approved by the server, the schedule registered in the selected group will be

9

downloaded to the device. The schedule will run after it is downloaded.

―

For further details on how to configure a schedule, refer to the <MagicInfo Server user's manual>.

―

If a device is deleted from the list of devices approved by the server, the device will reboot to reset its

settings.

Setting the current time

A schedule may not run if the time set on the device is different from the server's current time.

Go to the tabs Device → Time.

1

Select your device.

2

Select Clock Set, and sync the time with the server.

3

•

When connecting to the server for the first time, the time on the product is set using the GMT time
of the region where the server is installed.

•

The time on the product can be changed from the server as shown in step 3.

•

Turning the product off and then on again will restore the time setting on the product to the last
time that was set from the server.

―

For further details on how to manage the time (scheduling, holiday management, etc.), refer to the

<MagicInfo Server user's manual>.

Player

Browse and play content stored on the selected device.

No channels

Network Channel

Local Channel

-

The displayed image may differ depending on the model.

Device:Internal Contents: All Sor t by: File Name....

Options

item(s)

Network Channel

Play content, templates and schedules configured on the server.

•

You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press INFO on the remote.

Select Network Channel from the Player menu.

1

Network Channel will run.

2

Local Channel

Play a schedule or channel that was configured in the product.

Select Local Channel from the Player menu.

1

―

The No channels message appears if no channel has been registered in Local Channel.

Local Channel will run.

2

Deployed Folders

Play a template stored on a connected USB device.

―

The Deployed Folders feature appears only when a USB device containing templates is connected.

My Templates

Play a template in My Templates stored in the internal memory of the product.

Available features in the Player page

The Player list page provides the following features.

•

Device

Select either Internal or USB to search for a desired device list.

-

All / Internal / USB

•

Contents

Select a content type as criterion to search for a desired content list.

-

All / Video / Image / PDF / Flash / Office / Template

•

Sort by

Specify the content sort criterion.

-

File Name / Recently played

•

Options

Menu items in the Player page

Option Name Operations

Play Seleted

Send

Delete

Go to Multimedia

Settings

Select and play desired content.

Copy content to another storage device.

Delete desired content.

Play content using the media play feature.

Configure detailed properties of content.

―

See the following page for details on the Settings feature.

Player page Settings menu

Settings

Aspect Ratio

Set Aspect Ratio to either Original or Full.

•

Full / Original

―

This feature is only available for Videos, Images, PDF and Office files.

Settings

Set whether to display content in the original aspect ratio or in full
screen size.

Aspect Ratio

Display Duration

Transition Effect

Content Layout

Safely Remove USB Device

-

The displayed image may differ depending on the model.

Landscape

Close

Display Duration

Set the duration for each page in a slideshow.

―

This feature is only available for Images, PDF, Flash and Office files.

Transition Eect

Configure transition effects between pages or scenes in a slideshow or video file.

•

None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random

―

This feature is only available for Images files.

Content Layout

Switch the orientation of playing content to Landscape or Portrait mode.

•

Landscape / Portrait

―

If Content Layout is Portrait view, it does not support VP8 video codec.

Safely Remove USB Device

Safely removes USB memory

Reset Settings

Restore all the values under Settings to the default when the product was purchased.

When Content is Running

Viewing the details of the content that is running

Information

Type:

CH Number:

CH Name:

Software Version:

MAC ID:

Tags:

Server:

USB:

Schedule download:

OK

-

The displayed image may differ depending on the model.

Network Channel

No channels selected

No channels selected

B2B-EP-MIP-4510

FF-FF-FF-FF-FF-FF

None

Not connected

Not connected

No Schedule to download

Press the INFO button on the remote control.

•

Type : Type of channel currently playing

―

Only applicable during Network Channel / Local Channel playback.

•

CH Number: Number assigned to the channel currently playing

―

Only applicable during Network Channel / Local Channel playback.

•

CH Name: Name of the channel currently playing

―

Only applicable during Network Channel / Local Channel playback.

•

Software Version: Displays the software version of a device

•

MAC ID: Displays the original identification number of a device

•

Tags: Tag settings assigned to a device from the server

•

Server: Displays the connection status (Connected, Disconnected or Not approved) of the server

•

USB: Displays the connection status of a USB device

•

Schedule download: Displays the progress of a network schedule being downloaded from the server

Changing the settings for the content that is running

Playlist Picture Mode Sound Mode Repeat

-

The displayed image may differ depending on the model.

-

This feature is not available when content is playing through Video Wall.

Music

Press the TOOLS button on the remote control during content playback to configure settings such as Picture Mode and

Sound Mode.

•

Playlist

View a list of content items currently playing.

•

Music

Set the background music for the content currently playing.

•

Picture Mode

Customizes the screen settings for the content currently playing

-

Shops & Malls / Offices & Schools / Terminals & Stations / Video Wall / Calibration

•

Sound Mode

Customizes the audio settings for the content currently playing

-

Standard / Music / Movie / Clear Voice / Amplify

•

Repeat

Set the repeat mode.

-

One / All

File Formats Compatible with Player

•

Supported file systems include FAT32 and NTFS.

•

A file with a vertical and horizontal resolution larger than the maximum resolution cannot be
played.

Check the vertical and horizontal resolution of the file.

•

Check the supported video and audio Codec types and Versions.

•

Check the supported file versions.

-

Flash version up to 10.1 is supported

-

PowerPoint version up to 97 – 2007 is supported

•

Only the last USB device that was connected is recognized.

Template files and LFD(.lfd) files

Restrictions

•

Ensure a distributed folder (content / schedules) exists in Internal / USB memory.

Playback restrictions

•

A maximum of two video (Videos) files can be played.

•

More than one Flash file cannot be played.

•

For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.

•

Multiple videos (Videos) cannot be played on a single display of a video wall simultaneously.

Network Schedule Multiframe

Playback restrictions

•

A maximum of two video files (Videos) can be played simultaneously.

•

In portrait playback mode, only one video file can be played at a time.

•

More than one Flash file cannot be played.

•

For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.

•

LFD(.lfd) files are not supported.

Sound output restrictions

•

More than one sound output cannot be used.

•

Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected
by the user

―

Network BGM: Settings can be configured in step 1 when creating a server schedule.

―

Local BGM: BGM settings can be configured using the tools displayed after the TOOLS button

is pressed during Player playback.

―

User-selected main frame: Main frame settings can be configured in step 2 when creating a

server schedule.

Sound output restrictions

•

More than one sound output cannot be used.

•

Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected
by the user

Contents

File Extension Container Video Codec Resolution Frame rate

(fps)

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.mov

*.3gp

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

*.v

*.vob

*.svi

*.m2ts

*.mts

*.divx

AVI

MKV

ASF

MP4

3GP

VRO

VOB

PS

TS

DivX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30

MPEG4 SP / ASP

H.264 BP / MP / HP

Motion JPEG

Window Media Video v9

MPEG2

MPEG1

VP6 640 x 480 4

Bit rate
(Mbps)

Audio Codec

AC3

LPCM

AAC

HE-AAC

WMA

DD+

MPEG(MP3)

DTS Core

G.711(ALaw, μ-Law)

Video Audio Image

•

3D video is not supported.

•

Content with a resolution larger than the
resolution specified in the table above is not
supported.

•

Video content with a Bit rate or Frame rate larger
than the rate specified in the table above can
cause choppy video during playback.

•

Video content will not play, or not play correctly,
if there is an error in the content or the container.

•

Some USB/digital camera devices may not be
compatible with the player.

•

Supports up to H.264, Level 4.1

•

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.

•

For all Video codecs except MVC, VP8, VP6:

-

Below 1280 x 720: 60 frame max

-

Above 1280 x 720: 30 frame max

•

GMC 2 or higher is not supported.

•

Supports only BD MVC Spec.

•

Certain codecs (MVC, VP8 and MJPEG) will not
be supported in the following situations: playing
different file types successively, playing LFD files,
or playing files in portrait mode.

•

Audio content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy audio during playback.

•

Video content will not play, or not play
correctly, if there is an error in the content or
the container.

•

Some USB/digital camera devices may not be
compatible with the player.

•

Supports up to WMA 10 Pro 5.1 channel. WMA
lossless audio is not supported.

•

QCELP, AMR NB/WB are not supported.

•

•

•

Compatible image file format : Jpeg

Supported maximum resolution : 15,360 x 8,640

Supported image effects : 9 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear,

Stairs, Wipe, Random)

Flash Power Point PDF

•

Compatible with Flash 10.1

•

Flash Animation

-

Compatible file format : SWF

•

Recommended resolution : 960 x 540

-

Caution
Performance comparable to Flash Player

on a Windows operating system cannot be
guaranteed

Optimization is needed during content
creation

•

Flash Video

-

Compatible file format : FLV

-

Video
Codec : H.264 BP

Resolution : 1920 x 1080

-

Audio
Codec : H.264 BP

-

Caution
F4V file format is not supported

Screen Video is not supported

•

Compatible document file formats

-

Extension : ppt, pptx

-

Version : Office 97 ~ Office 2007

•

Functions not supported

-

Animation effect

-

3D shapes (which will be displayed in 2D)

-

Header and footer (some subitems are not
supported)

-

Word Art

-

Align
A group alignment error may occur

-

Office 2007
SmartArt is not fully supported. 97 out of

115 subitems are supported.

-

Object insertion

-

Half-width characters

-

Letter spacing

-

Charts

-

Vertical text
some subitems are not supported

-

Slide notes and handout

•

•

Compatible document file formats

-

Extension : pdf

Functions not supported

-

Content less than 1 pixel not supported
because of performance degradation issue.

-

Masked Image, Tiled Image content not
supported.

-

Content with Rotated Text, not supported.

-

3D Shadow Effects not supported.

-

Some characters not supported
(Special characters may be corrupted)

WORD Template les LFD

•

Compatible document file formats

-

Extension : .doc, .docx

-

Version : Office 97 ~ Office 2007

•

Functions not supported

-

Page background effect

-

Some paragraph styles

-

Word Art

-

Align
A group alignment error may occur

-

3D shapes (which will be displayed in 2D)

-

Office 2007
SmartArt is not fully supported. 97 out of

115 subitems are supported.

-

Charts

-

Half-width characters

-

Letter spacing

-

Vertical text
some subitems are not supported

-

Slide notes and handout

•

Creation/editing/playback are only available in

Template.

•

Supported in Network Channel and Local

Channel

•

Compatible document file formats

-

Extension : .lfd

File Formats Compatible with Video Wall

―

Refer to the <MagicInfo Server user's manual> for further details.

Video Image

•

3D video is not supported.

•

Content with a resolution larger than the resolution specified in the table
above is not supported.

•

Video content with a Bit rate or Frame rate larger than the rate specified in
the table above can cause choppy video during playback.

•

Video content will not play, or not play correctly, if there is an error in the
content or the container.

•

Some USB/digital camera devices may not be compatible with the player.

•

Supports up to H.264, Level 4.1

•

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

•

For all Video codecs except MVC, VP8, VP6:

-

Below 1280 x 720: 60 frame max

-

Above 1280 x 720: 30 frame max

•

GMC 2 or higher is not supported.

•

Supports only BD MVC Spec.

•

Some codecs may not be supported in portrait playback mode.

•

•

Compatible image file format : Jpeg, png, bmp

Supported maximum resolution : 15360 x 8640

―

A higher resolution image may take longer to display on the screen.

Restrictions

•

Only one video (Videos) file can be played per client.

―

Different content files can be played on the displays of a video wall.

Two video (Videos) files cannot be played on a single display of a video wall.

Available

Available Not available

Schedule

HOME → Schedule → ENTER E

Schedule

Schedule your content on a local channel or edit existing channels.

Playing Time [CH1]Chnnel 1 [CH2]Chnnel 2 [CH3]Chnnel 3

12:00 am

12:30 am

01:00 am

01:30 am

02:00 am

02:30 am

03:00 am

03:30 am

04:00 am

04:30 am

05:00 am

05:30 am

Add Programme Schedule your content on

CH 2.

Schedule your content on

CH 3.

OptionsType : Local Device : Internal

Add content to create

a programme on the

channel.

Configure the display
duration to set how long
each item of content will

play for.

Set a start time and

a stop time for the

programme.

Available features in the Schedule page

The Schedule page provides the following features.

•

Type

-

Local: Add or edit schedules.

-

Network: View the network schedule configured on the server.

•

Device

-

Display the name of a connected storage device.

―

This option only activates if Type is set to Local in Device.

•

Options

Menu items in the Schedule page

Option Name Operations

Send

Delete

Settings

Send configured schedules to another storage device. This is similar to the "copy" feature
on PCs.

Delete schedules.

The default content plays on a channel that does not contain programme information.

Configuring channel schedules

Play media content such as videos, photos and music at a desired time.

Select a channel to configure.

1

Select video, music and photo content you want to apply to the channel schedule.

2

Set the time to play the schedule. (Start Time ~ Stop Time)

3

Change the channel schedule name, and then select a destination folder to save to.

4

Press the Save button.

5

―

Only applicable when Type is set to Local.

Editing a channel schedule.

Change settings for a configured channel schedule such as content, the duration and the schedule name.

Select a channel to edit.

1

Select video, photo or music content to edit in the channel schedule.

2

-

Deleting content: Place the cursor over the desired content and then press the E button to delete it.

-

Move to the far right end of the content list. Click the + button to add content or change the playback order of content items.

Set the time to play the schedule. (Start Time ~ Stop Time)

3

Change the channel schedule name, and then select a destination folder to save to.

4

Press the Save button.

5

―

Only applicable when Type is set to Local.

Template

HOME → Template → ENTER E

Template

Select a template to customise.

-

The displayed image may differ depending on the model.

-

The Template function is disabled if Video Wall is set to On.

Market : All Layout : Landscape

item(s)

Available features in the Template page

Create unique content using templates. It is easy to create content. Simply change images and text in a
template.

Sort the template list using the following criteria.

•

Market

•

Layout

-

Landscape / Portrait

Select a template from the provided sample templates.

1

Template

Select in the editable zone to add content or edit the existing text.

Preview

New town

interior design

Sustainble evolution unfolods tomorrw’s design

Background Screen Background Music

Save

Organize a template by inserting text, video, photo, or PDF files as desired.

2

Inserting content such as videos, photos and PDF files

Entering text

Template

Select in the editable zone to add content or edit the existing text.

Preview

New town

interior design

Sustainble evolution unfolods tomorrw’s design

Background Screen Background Music

Edit Text

Font options

Edit Text

Select the Edit Text window to enter text.

Font options

Font Colour: Specify the text colour for the message.

Background Colour: Specify the background colour for the message.

Background opacity: Specify the background transparency for the message.

Alignment: Select a message alignment mode.

Scroll: Specify the scroll direction/speed for the message.

Hide Element: Display or hide a message.

―

Selecting Hide does not reset the message settings.

Reset: Reset all settings in Font options to default settings.

Save

Template

Select in the editable zone to add content or edit the existing text.

Edit

Item(s) selected

Select item to delete

picture1.jpg

Duration Options Hide Element Show

Aspect Ratio Mute

Done Cancel

Configuring the background image/background music

Template

Select in the editable zone to add content or edit the existing text.

Background Screen

..

Background Colour White

Done

Cancel

Device : Internal

Preview

Configure Template Name and Storage.

3

Save

Template preview is running. It will stop
after 20 seconds.

New town

interior design

Sustainble evolution unfolods tomorrw’s design

Preview the created template using the Preview feature.

1

To save the template, press the Save button.

2

Duration

Template Name

Storage

Save Cancel

Press the Save button to finish creating the content.

4

23:59:59

Template1

Internal

Clone Product

Export the product settings to a USB device or load the settings via a USB device.

This option is useful when assigning the same settings to several products.

HOME → Clone Product → ENTER E

Clone Product

-

The displayed image may differ depending on the model.

When USB does not contain a duplicate le

Connect the USB device to a USB port. Run the Clone Product function.

1

The No cloning file found on the USB device. Copy system settings from this product to the USB storage device?

2

message appears.

When USB contains a duplicate le

Connect the USB device to a USB port. Run the Clone Product function.

1

The Cloning file found. Please select an option. message appears.

2

Run the Clone From USB or Clone to USB function.

-

Clone From USB: Apply the USB device settings to the product.

-

Clone to USB: Copy the product settings to the USB device.

―

After configuration is complete, the product is rebooted automatically.

ID Settings

Assign an ID to a set.

Press u/d to select a number, and press E.

HOME → ID Settings → ENTER E

ID Settings

-

The displayed image may differ depending on the model.

Device ID

Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)

―

Enter the number you want using the number buttons on the remote control.

PC Connection Cable

Select a method to connect to MDC to receive the MDC signal.

•

RS232C cable

Communicate with MDC via the RS232C-stereo cable.

•

RJ45(LAN) cable

Communicate with MDC via the RJ45 cable.

Device ID Auto Set

This feature automatically allots an ID number to a device connected via an RS232C cable.

Video Wall

HOME → Video Wall → ENTER E

Video Wall

-

The displayed image may differ depending on the model.

Customize the layout of multiple displays that are connected to form a video wall.

In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.

To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo
function.

Apply to

•

Current Source (screen output from a device connected to Source): Configure videowall features for the screen output

from an external device connected to the product.

•

MagicInfo Player S: Configure videowall features for content saved in the product or content saved on a USB memory or

SD card.

Restrictions

―

Playback may be initially choppy if video files of different resolutions play successively (i.e., 1280x720 content plays after

1920x1080 content) or an image file and a video file play one after the other.

Video Image

•

Supported resolution

-

1920 x 1080 @ 24p/30p

-

1280 x 720 @ 24p/30p/60p

•

HEVC and 3D images are not supported.

•

Compatible image file format : Jpeg, png, bmp

•

Supported maximum resolution

-

jpeg: 15360 x 8640

-

png: 4096 x 4096

-

bmp: 4096 x 4096

Video Wall

You can activate or deactivate Video Wall.

To organize a video wall, select On.

•

Off / On

Horizontal x Vertical

This feature automatically splits a videowall display based on a videowall matrix configuration.

Enter the videowall matrix.

The videowall display is split based on the configured matrix. The number of vertical or horizontal display devices can be set within the range 1 and 15.

―

A videowall display can be split into a maximum of 225 screens.

―

The Horizontal x Vertical option is only enabled when Video Wall is set to On.

Screen Position

To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.

Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form the videowall.

To rearrange products, use the direction buttons on the remote control to move a product to another desired number. Press the E button.

•

All Displays: Assign screen positions to All displays. Then, you don't need to set up video wall for individual displays.

•

Current Displays: Only Assign screen position for this first display.

―

Screen Position can be set up with a maximum of 15x15 split screens (225 devices). If connected using DP Loopout mode, the maximum number of devices changes

to 100.

―

The Screen Position option is only enabled when Video Wall is set to On.

―

To use the function, make sure Horizontal x Vertical is configured.

Format

Select how to display images on the videowall display.

•

Full: Display images in full screen with no margin.

•

Natural: Display images in the original aspect ratio without enlarging or reducing the size.

―

The Format option is only enabled when Video Wall is set to On.

Network Status

HOME → Network Status → ENTER E

Network Status

-

The displayed image may differ depending on the model.

Check the current network and Internet connection.

Picture Mode

HOME → Picture Mode → ENTER E

Picture Mode

-

The displayed image may differ depending on the model.

Select a picture mode (Picture Mode) suitable for the environment where the product will be used.

•

Shops & Malls

Suitable for shopping malls.

-

Select either Videos/Images or Tex t depending on the picture mode.

•

Offices & Schools

Suitable for offices and schools.

-

Select either Videos/Images or Tex t depending on the picture mode.

•

Terminals & Stations

Suitable for bus terminals and train stations.

-

Select either Videos/Images or Tex t depending on the picture mode.

•

Video Wall

Suitable for environments where videowall display are used.

-

Select either Videos/Images or Tex t depending on the picture mode.

•

Calibration

In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration programme
Advanced Colour Management are applied.

-

To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness,
colour, gamma and uniformity, using the colour calibration programme Advanced Colour Management.

-

For more information on the Advanced Colour Management programme, contact the dealer you purchased the
product from.

On/O Timer

―

You must set the clock before you can use On/Off Timer.

HOME → On/Off Timer → ENTER E

On/Off Timer

-

The displayed image may differ depending on the model.

On Timer

Set On Timer so that your product turns on automatically at a time and on a day of your choosing.

The power is turned on with the specified volume or input source.

On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first.

(On Timer 1 ~ On Timer 7)

•

Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

If you select Manual, you can choose the days you want On Timer to turn on your product.

-

The check mark indicates days you’ve selected.

•

Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left

and right arrow buttons to change entry fields.

•

Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.

•

Source: Select the input source of your choice.

•

Contents (when the Source is set to Internal/USB): From the USB device or internal memory device, select a folder

containing content you want to play when the product turns on. Content can include music, photo or video files.

―

This function is available only when a USB device is connected.

―

If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not

operate correctly.

―

If there is only one photo file in the USB, the Slide Show will not play.

―

If a folder name is too long, the folder cannot be selected.

―

Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders

assigned to each USB have different names.

―

We recommend that you use a USB memory stick and a multi card reader when using On Timer.

―

The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some

manufacturers because the product can take too long to recognize these devices.

O Timer

Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)

•

Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

If you select Manual, you can choose the days you want Off Timer to turn off your product.

-

The check mark indicates days you’ve selected.

•

Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left

and right arrow buttons to change entry fields.

Holiday Management

Timer will be disabled during a period specified as a holiday.

•

Add Holiday: Specify the period you want to add as a holiday.

Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Save button.

The period will be added to the list of holidays.

-

Start: Set the start date of the holiday.

-

End: Set the end date of the holiday.

―

Delete: Delete selected items from the list of holidays.

―

Edit: Select a holiday item and then change the date.

•

Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.

-

Press E to select the On Timer and Off Timer settings you do not want to activate.

-

The selected On Timer and Off Timer will not activate.

Ticker

HOME → Ticker → ENTER E

Ticker

-

The displayed image may differ depending on the model.

Input text while a video or image is displayed and display the text on the screen.

•

Off / On

•

Message: Enter a message to display on the screen.

•

Time: Set the Start Time and End Time to display a Message.

•

Font options: Specify the text font and colour for the message.

•

Position: Select an orientation to display a Message.

•

Scroll: Specify the scroll Direction and Speed for the message.

•

Preview: Preview configured caption settings.

More settings

HOME → More settings → ENTER E

More settings

-

The displayed image may differ depending on the model.

The picture settings menu appears.

URL Launcher

HOME → URL Launcher → ENTER E

pm

12:00

January 1 2014

Change URL

URL Launcher

Play various contents sych as scheduled
channels, templates or files.

For details on how to use the URL Launcher feature, contact the dealer the product was purchased from.

―

To use the URL Launcher feature, set Play via to URL Launcher in System.

Clone Product

Picture Mode

-

The displayed image may differ depending on the model.

ID Settings

On/Off Timer

Video Wall

Ticker

Network Status

More settings

Screen Adjustment

Configure the Picture settings (Backlight, Colour Tone, etc.).

The layout of the Picture menu options may vary depending on the product.

Picture Mode

MENU m → Picture → Picture Mode → ENTER E

Picture

Picture Mode

·

Backlight

·

Contrast

·

Brightness

·

Sharpness

·

Colour

·

Tint (G/R)

Terminals & Stations

G50 R50

100

70

45

65

50

Select a picture mode (Picture Mode) suitable for the environment where the product will be used.

•

Shops & Malls

Suitable for shopping malls.

-

Select either Videos/Images or Tex t depending on the picture mode.

•

Offices & Schools

Suitable for offices and schools.

-

Select either Videos/Images or Tex t depending on the picture mode.

•

Terminals & Stations

Suitable for bus terminals and train stations.

-

Select either Videos/Images or Tex t depending on the picture mode.

•

Video Wall

Suitable for environments where videowall display are used.

-

Select either Videos/Images or Tex t depending on the picture mode.

•

Calibration

In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration programme
Advanced Colour Management are applied.

-

To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness,
colour, gamma and uniformity, using the colour calibration programme Advanced Colour Management.

-

For more information on the Advanced Colour Management programme, contact the dealer you purchased the
product from.

-

The displayed image may differ depending on the model.

Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)

MENU m → Picture → ENTER E

Your product has several options for adjusting picture quality.

Picture Mode Picture Mode settings Adjustable options

Shops & Malls, Offices & Schools,
Terminals & Stations, Video Wall

Videos/Images Backlight / Contrast / Brightness / Sharpness /

Colour / Tint (G/R)

Tex t Backlight / Contrast / Brightness / Sharpness

Picture

Picture Mode

·

Backlight

·

Contrast

·

Brightness

·

Sharpness

·

Colour

·

Tint (G/R)

-

The displayed image may differ depending on the model.

Terminals & Stations

G50 R50

100

70

45

65

50

Calibration Backlight

―

When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted

accordingly.

―

You can adjust and store settings for each external device you have connected to an input on the product.

―

Lowering picture brightness reduces power consumption.

Colour Temperature

MENU m → Picture → Colour Temperature → ENTER E

Picture

Colour Temperature 10000K

-

The displayed image may differ depending on the model.

Adjust the colour temperature (Red / Green / Blue). (Range: 2800K–16000K)

―

If Colour Tone is set to Off, Colour Temperature is disabled.

―

If Picture Mode is set to Calibration, Colour Temperature is disabled.

White Balance

MENU m → Picture → White Balance → ENTER E

Picture

2 Point

Adjust the colour temperature for a more natural picture.

•

R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.

•

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.

•

Reset: Suitable for environments where videowall display are used.

White Balance

-

The displayed image may differ depending on the model.

10 Point

Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.

•

Off / On

Level: Select interval to adjust.

Red: Adjust the red level.

Green: Adjust the green level.

Blue: Adjust the blue level.

Reset: Suitable for environments where videowall display are used.

―

Some external devices may not support this function.

―

Enabled when Picture Mode is set to Offices & Schools (Videos/Images).

Gamma

MENU m → Picture → Gamma → ENTER E

Picture

Gamma 0

-

The displayed image may differ depending on the model.

Adjust the primary colour intensity.

―

If Picture Mode is set to Calibration, Gamma is disabled.

Calibrated value

MENU m → Picture → Calibrated value → ENTER E

Picture

Calibrated value

-

The displayed image may differ depending on the model.

Select whether to apply the brightness, colour, gamma and uniformity settings customized using the colour calibration
programme Advanced Colour Management to the Information and Advertisement modes.

•

Don't apply / Apply

―

For more information on the Advanced Colour Management programme, contact the dealer you purchased the product

from.

―

If Picture Mode is set to Calibration, Calibrated value is disabled.

Advanced Settings

MENU m → Picture → Advanced Settings → ENTER E

Picture Mode Picture Mode settings Adjustable options

Shops & Malls, Offices & Schools,
Video Wall

Videos/Images

Dynamic Contrast / Black Tone / Flesh Tone /
RGB Only Mode / Colour Space

Advanced Settings

Dynamic Contrast

Black Tone

Flesh Tone

RGB Only Mode

Colour Space

Motion Lighting

-

The displayed image may differ depending on the model.

Medium

Darker

O

Native

O

Tex t

Terminals & Stations Videos/Images

Tex t

0

―

If Picture Mode is set to Calibration, Advanced Settings is disabled.

Dynamic Contrast / Black Tone

Dynamic Contrast / Black Tone / Flesh Tone /
RGB Only Mode / Colour Space / Motion
Lighting

Dynamic Contrast / Black Tone

Advanced Settings

Dynamic Contrast

Medium

Dynamic Contrast

Adjust the screen contrast.

•

Off / Low / Medium / High

Black Tone

Flesh Tone

RGB Only Mode

Colour Space

Motion Lighting

-

The displayed image may differ depending on the model.

Darker

O

Native

O

0

Select the black level to adjust the screen depth.

•

Off / Dark / Darker / Darkest

Flesh Tone

Black Tone

Emphasize pink Flesh Tone.

RGB Only Mode

Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation.

•

Off / Red / Green / Blue

Colour Space

Adjusts the range and variety of colours (the colour space) available to create images.

•

Auto / Native / Custom

―

To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.

Motion Lighting

Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.

•

Off / On

Picture Options

MENU m → Picture → Picture Options → ENTER E

Picture Mode Picture Mode settings Adjustable options

Shops & Malls, Offices & Schools,
Terminals & Stations, Video Wall

Videos/Images

Colour Tone / Digital Clean View / MPEG
Noise Filter / HDMI Black Level / Film Mode /
Dynamic Backlight

Picture Options

Colour Tone

Digital Clean View

MPEG Noise Filter

HDMI Black Level

Film Mode

Dynamic Backlight

-

The displayed image may differ depending on the model.

O

O

O

Normal

O

O

Calibration

Tex t

Colour Tone / HDMI Black Level / Dynamic
Backlight

HDMI Black Level / Dynamic Backlight

Picture Options

Colour Tone

Digital Clean View

MPEG Noise Filter

HDMI Black Level

O

O

O

Normal

Colour Tone

If the input source is PC, DVI or HDMI1, HDMI2 (PC connection), DisplayPort.

•

Off / Cool / Standard / Warm

If the input source is AV, Component or HDMI1, HDMI2.

•

Off / Cool / Standard / Warm1 / Warm2

―

If Picture Mode is set to Calibration, Colour Tone is disabled.

―

Settings can be adjusted and stored for each external device connected to an input on the product.

Film Mode

Dynamic Backlight

-

The displayed image may differ depending on the model.

O

O

Digital Clean View

If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce any static
and ghosting that may appear on the screen.

•

Off / Low / Medium / High / Auto

―

Received signal intensity is the strongest when the bar is green.

―

When the signal is weak, try all the options until the the product displays the best picture.

MPEG Noise Filter

Reduces MPEG noise to provide improved picture quality.

•

Off / Low / Medium / High / Auto

Picture Options

Colour Tone

Digital Clean View

O

O

HDMI Black Level

Selects the black level on the screen to adjust the screen depth.

•

Low / Normal

―

Available only in DisplayPort, HDMI1, HDMI2 and DVI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).

MPEG Noise Filter

HDMI Black Level

Film Mode

Dynamic Backlight

-

The displayed image may differ depending on the model.

O

Normal

O

O

Film Mode

This mode is suitable to view movies.

Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

•

Off / Auto1 / Auto2

―

Available in AV, Component (480i / 1080i).

Dynamic Backlight

Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.

•

Off / On

―

The Dynamic Backlight is not available when the input source is set to PC, AV or Component while Video Wall is On.

Picture Size

choose size and aspect ratio picture displayed on screen.

MENU m → Picture → Picture Size → ENTER E

Picture Size

Picture Size 16:9

·

Position

Resolution O

-

The displayed image may differ depending on the model.

Picture Size

―

Different screen adjustment options are displayed depending on the current input source.

•

16:9: Sets the picture to 16:9 wide mode.

•

Zoom1: Use for moderate magnification. Cuts off the top and sides.

•

Zoom2: Use for a stronger magnification.

•

Smart View 1: Reduces the 16:9 picture by 50%.

―

Smart View 1 is enabled only in HDMI1, HDMI2 mode.

•

Smart View 2: Reduces the 16:9 picture by 25%.

―

Smart View 2 is enabled only in HDMI1, HDMI2 mode.

•

Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

•

4:3: Sets the picture to basic (4:3) mode.

―

Do not set your product to 4:3 format for a long time.

The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn)
which is not covered by the warranty.

•

Screen Fit: Displays the full image without any cut-off when HDMI1, HDMI2 (720p / 1080i / 1080p) or Component (1080i

/ 1080p) signals are inputted.

•

Custom: Changes the resolution to suit the user's preferences.

•

Original ratio: If the input source is PC, DVI, HDMI1, HDMI2 (PC connection), DisplayPort, the video will display in the

original aspect ratio.

―

Available ports may differ depending on the model.

Position

Picture Size

Picture Size Custom

·

Position

Resolution O

-

The displayed image may differ depending on the model.

Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or Custom.

―

To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Custom, follow these steps.

Press the d button to select Position. Press the E button.

1

Press the u or d button to move the picture up or down.

2

Press the E button.

3

Zoom/Position

Picture Size

Picture Size Custom

·

Zoom/Position

Resolution O

-

The displayed image may differ depending on the model.

Adjusts the picture zoom and position. This option is available when the input source is set to HDMI1, HDMI2 (1080i/1080p) or

Component (1080i/1080p). Picture Size must be set to Custom for the option to be available.

Press the d button to select Zoom/Position. Press the E button.

1

Select the Zoom or Position. Press the E button.

2

Press the u/d/l/r button to move the picture.

3

Press the E button.

4

―

If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.

The picture will be set to its default position.

Resolution

If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture
quality by selecting the same resolution for the product as the PC using this menu.

Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768

Auto Adjustment

MENU m → Picture → Auto Adjustment → ENTER E

Picture

Auto Adjustment

-

Available in PC mode only.

-

The displayed image may differ depending on the model.

PC Screen Adjustment

MENU m → Picture → PC Screen Adjustment → ENTER E

Picture

PC Screen Adjustment

Adjust frequency values/positions and fine tune the settings automatically.

•

Coarse / Fine

Removes or reduces picture noise.

If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the centre
of screen.

•

Position

To adjust the PC’s screen position if it is not centreed or does not fit the product screen.

Press the ▲ or ▼ button to adjust the Vertical Position. Press the ◄ or ► button to adjust the Horizontal Position.

•

Image Reset

Resets the image to the default settings.

-

Available in PC mode only.

-

The displayed image may differ depending on the model.

Picture O

MENU m → Picture → Picture Off → ENTER E

Picture

Picture O

-

The displayed image may differ depending on the model.

Selecting Picture Off switches off the screen. The volume is not disabled.

To switch the screen on, press any button other than the volume button.

Reset Picture

MENU m → Picture → Reset Picture → ENTER E

Picture

Reset Picture

-

The displayed image may differ depending on the model.

Resets your current picture mode to its default settings.

OnScreen Display

PIP

MENUm → OnScreen Display → PIP → ENTERE

OnScreen Display

PIP

Rotation

Screen Protection

Message Display

Menu Transparency

Menu Language

Reset OnScreen Display

Medium

English

PIP Settings

The picture from the external video source will be in the main screen and the picture from the product will be in the PIP sub­picture screen.

Main picture Sub picture

PC AV / Component

AV / Component PC / DisplayPort / HDMI1, HDMI2 / DVI

HDMI1, HDMI2 / DVI / SBB AV / Component

MagicInfo PC / AV / Component / DisplayPort / HDMI1, HDMI2 / DVI

-

The displayed image may differ depending on the model.

-

For PIP sound, refer to the Sound Select instructions.

-

If you turn the product off while watching in the PIP mode, PIP mode will remain after power
Off/On.

-

You may notice that the picture in the PIP screen becomes slightly unnatural when you use
the main screen to view a game or karaoke.

PIP

PIP

Source

Size

Position

Sound Select

OK

-

The displayed image may differ depending on the model.

O

PC

Õ

Ã

Main

•

PIP (Off / On): Activate or deactivate the PIP function.

•

Source: You can select a source of the sub picture.

•

Size (

•

Position (

―

•

Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture.

, , , , , , ): Select a size for the subpicture.

, , , , ): Select a position for the sub-picture.

In double ( , , , ) mode, you cannot select Position.

Rotation

MENUm → OnScreen Display → Rotation → ENTERE

Rotation

Rotate menu

Configure the menu screen.

•

Landscape: Display the menu in landscape mode (default).

•

Portrait: Display the menu in portrait mode on the right side of the product screen.

―

Available only PC, DVI, HDMI1, HDMI2, MagicInfo, DisplayPort mode.

Rotate menu

Rotate Content

Aspect Ratio

-

The displayed image may differ depending on the model.

Landscape

Landscape

Full Screen

Rotate Content

Rotate the product screen orientation.

•

Landscape: Display the screen in landscape mode (default).

•

Portrait: Display the screen in portrait mode.

―

Available only PC, DVI, HDMI1, HDMI2 (when a PC is connected), DisplayPort mode.

Aspect Ratio

Set the rotated screen to be either full screen or original.

•

Full Screen: Display the rotated screen in full screen.

•

Original: Display the rotated screen in the original aspect ratio.

―

Available only when Rotate Content is set to Portrait.

―

Available only PC, DVI, HDMI1, HDMI2 (when a PC is connected), DisplayPort mode.

Screen Protection

MENUm → OnScreen Display → Screen Protection → ENTERE

Screen Protection

Auto Protection Time

Screen Burn Protection

-

The displayed image may differ depending on the model.

O

Auto Protection Time

If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the
formation of burnt in ghost images on the screen.

•

Off / 2 hours / 4 hours / 8 hours / 10 hours

Screen Burn Protection

To reduce the possibility of screen burn, this unit is equipped with Screen Burn Protection screen burn prevention
technology.

Screen Burn Protection moves the picture slightly on the screen.

The Screen Burn Protection Time setting allows you to programme the time between movements of the picture in minutes.

Pixel Shift

Minimize image retention by finely moving pixels horizontally or vertically.

•

Pixel Shift (Off / On)

―

Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On.

•

Horizontal: Sets how many pixels the screen moves horizontally.

•

Vertical: Sets how many pixels the screen moves vertically.

•

Time: Set the time interval for performing the horizontal or vertical movement, respectively.

Available Pixel Shift Settings and Optimum Settings.

Available Settings Optimum Settings

Horizontal (pixels) 0 ~ 4 4

Vertical (pixels) 0 ~ 4 4

Time (minute) 1 min ~ 4 min 4 min

―

The Pixel Shift value may differ depending on the product size (inches) and mode.

―

Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a defect in the

product.

―

If Picture Size is set to Screen Fit, Pixel Shift is disabled.

Screen Burn Protection

Pixel Shift

Timer

You can set the timer for Screen Burn Protection.

The Screen Burn Protection feature stops automatically after a specified period of time.

Timer

Immediate display

Side Grey

-

The displayed image may differ depending on the model.

O

O

Timer

Off

Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).

Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End
Time).

―

Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.

•

Mode: Select a screen protective pattern to display.

-

Pixel: Pixels on the screen alternate black continuously.

-

Rolling bar: A vertical bar moves left to right.

-

Fading screen: The entire screen becomes brighter, then darker.

―

The Rolling bar and Fading screen patterns appear only once regardless of the specified repeat period or time.

•

Period: Specify the time interval to activate the Screen Burn Protection function.

―

The option is enabled when Repeat is selected for Timer.

•

Time: Specify the duration to keep the Screen Burn Protection function on.

―

Enabled when Timer is set to Repeat and Mode is set to Pixel.

•

Start Time: Set the start time to activate the screen protection function.

―

The option is enabled when Interval is selected for Timer.

•

End Time: Set the end time to deactivate the screen protection function.

―

The option is enabled when Interval is selected for Timer.

Screen Burn Protection

Pixel Shift

Immediate display

Select the screen saver you want to display immediately.

•

Off / Pixel / Rolling bar / Fading screen

Timer

Immediate display

Side Grey

-

The displayed image may differ depending on the model.

O

O

Message Display

MENUm → OnScreen Display → Message Display → ENTERE

Message Display

Source Info

No Signal Message

On

On

Side Grey

When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen.

•

Off / Light / Dark

Source Info

Select whether to display the source OSD when the input source changes.

•

Off / On

No Signal Message

Select whether to display the no-signal OSD when no signal is detected.

•

Off / On

MDC Message

-

The displayed image may differ depending on the model.

On

MDC Message

Select whether to display the MDC OSD when the product is controlled by the MDC.

•

Off / On

Menu Transparency

MENU m → OnScreen Display → Menu Transparency → ENTER E

OnScreen Display

Menu Transparency Medium

-

The displayed image may differ depending on the model.

Adjust transparency of menu box.

•

High / Medium / Low

Menu Language

MENU m → OnScreen Display → Menu Language → ENTER E

OnScreen Display

Menu Language English

-

The displayed image may differ depending on the model.

Set the menu language.

―

A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions

on your PC.

Reset OnScreen Display

MENU m → OnScreen Display → Reset OnScreen Display → ENTER E

OnScreen Display

Reset OnScreen Display

-

The displayed image may differ depending on the model.

This option returns the current settings under OnScreen Display to the default factory settings.

Sound Adjustment

Configure the sound (Sound) settings for the product.

Sound Mode

MENU m → Sound → Sound Mode → ENTER E

Sound

Sound Mode

Sound Eect

HDMI Sound

Sound on Video Call

Speaker Settings

Auto Volume

Reset Sound

Standard

AV(HDMI)

Current Source

O

You can select a sound mode to suit your personal preferences.

•

Standard: Selects the normal sound mode.

•

Music: Emphasizes music over voices.

•

Movie: Provides the best sound for movies.

•

Clear Voice: Emphasizes voices over other sounds.

•

Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

―

If Speaker Settings is set to External, Sound Mode is disabled.

-

The displayed image may differ depending on the model.

Sound Eect

MENUm → Sound → Sound Effect → ENTERE

Configure your preferred sound effect for output sound.

―

If Speaker Settings is set to External, Sound Effect is disabled.

―

Available only when Sound Mode is set to Standard.

Sound Eect

Virtual Surround

Dialog Clarity

Equaliser

-

The displayed image may differ depending on the model.

O

O

Virtual Surround

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related
Transfer Function) technology.

•

Off / On

Dialog Clarity

This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be
heard more clearly.

•

Off / On

Equaliser

Use Equaliser to customize sound setting for each speaker.

•

Balance L/R: Adjusts the balance between the right and left speaker.

•

100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

•

Reset: Resets the equalizer to its default settings.

HDMI Sound

MENU m → Sound → HDMI Sound → ENTER E

Sound

HDMI Sound AV(HDMI)

-

The displayed image may differ depending on the model.

Select whether to hear from AV(HDMI) or PC(DVI).

•

AV(HDMI) / PC(DVI)

Sound on Video Call

MENU m → Sound → Sound on Video Call → ENTER E

Sound

Sound on Video Call Current Source

-

The displayed image may differ depending on the model.

Select sound output to listen to during a video call.

•

Current Source / Video Call

Speaker Settings

MENU m → Sound → Speaker Settings → ENTER E

Sound

Speaker Settings

-

The displayed image may differ depending on the model.

TV Sound Output

•

External / Receiver

―

If there is no video signal, both the products speakers and the external speakers will be mute.

Auto Volume

MENU m → Sound → Auto Volume → ENTER E

Sound

Auto Volume O

-

The displayed image may differ depending on the model.

The volume can vary depending on the channel.

Automatically equalize the volume level when switching to another channel.

•

Off / Normal / Night

Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same.

Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you

may want to keep the volume low.

―

To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of the

connected source device may not be applied if Auto Volume is set to Normal or Night.

Reset Sound

MENU m → Sound → Reset Sound → ENTER E

Sound

Reset Sound

-

The displayed image may differ depending on the model.

The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.

Network

Network Status

MENUm → Network → Network Status → ENTERE

You can check the current network and Internet status.

Network Status

Your wireless network and Internet connection are setup and ready to use.

You are connected to the Internet. If you have any problems using online services, please
contact your Internet service provider.

CloseRetryIP SettingsDisconnect

-

The displayed image may differ depending on the model.

Network Settings

MENUm → Network → Network Settings → ENTERE

Configure network settings to use various smart hub features such as Internet search, content sharing
through a home network and feature updates.

Network Settings

Select your network type.

Network Type Wireless

Wireless network

You can connect your
Device to the internet.
Please select which wireless
network to use.

Refresh WPS(PBC)

-

The displayed image may differ depending on the model.

Network Type

•

Wireless / Wired

Network Settings (Wired)

Connecting to a Wired Network

There are three ways to attach your product to your LAN using cable.

•

You can attach your product to your LAN by connecting the LAN port on the back of your product
to an external modem using a LAN cable.

See the diagram below.

The Modem Port on the Wall

Modem Cable LAN Cable

•

You can attach your product to your LAN by connecting the LAN port on the back of your product
to an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See
the diagram below.

The Modem Port on the Wall

External Modem

(ADSL / VDSL)

External Modem

(ADSL / VDSL)

IP Sharer

(having DHCP server)

LAN

RJ45

LAN

RJ45

•

Depending on how your network is configured, you may be able to attach your product to your
LAN by connecting the LAN port on the back of your product directly to a network wall outlet
using a LAN cable.

See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in
your house.

LAN

The LAN Port on the Wall

LAN Cable

RJ45

If you have a Dynamic Network, you should use an ADSL modem or router that supports the Dynamic
Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the
IP address, subnet mask, gateway, and DNS values your product needs to access the Internet so you do
not have to enter them manually. Most home networks are Dynamic Networks.

Some networks require a Static IP address. If your network requires a Static IP address, you must enter
the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen
when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values,
contact your Internet Service Provider (ISP).

If you have a Windows computer, you can also get these values through your computer.

―

You can use ADSL modems that support DHCP if your network requires a Static IP address.

―

ADSL modems that support DHCP also let you use Static IP addresses.

Modem Cable LAN Cable LAN Cable

Set the network connection to use Internet services such as perform software upgrades.

Getting the Network Connection Values

Automatic Network Settings (Wired)

Connect to the network using a LAN cable.

Make sure a LAN cable is connected first.

How to set up automatically

Set Network Type to Wired from the Network Settings page.

1

Press the Connect button to start Network Settings.

2

-

The Connect button is only enabled when the LAN cable is properly connected.

The network test screen appears and verifies the network connection.

3

When the connection has been verified, the “Wired network and Internet connection

completed.” message appears.

―

If the connection process fails, check the LAN port connection.

―

If the automatic process cannot find the network connection values or if you want to set the

connection manually, go to the next section, network setup.

Manual Network Settings (Wired)

Offices may use static IP addresses.

If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.

To view the Network connection values on most Windows computers, follow these steps.

Right click the Network icon on the bottom right of the screen.

1

In the pop-up menu that appears, click Status.

2

On the dialog that appears, click the Support tab.

3

On the Support Tab, click the Details button. The Network connection values are displayed.

4

How to set up manually

Set Network Type to Wired from the Network Settings page.

1

Press the Connect button to start Network Settings.

2

-

The Connect button is only enabled when the LAN cable is properly connected.

The network test screen appears and the verification process starts. Press Stop. The verification

3

process stops.

Select IP Settings on network connection screen. The IP Settings screen appears.

4

Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry

5

process for each field in the IP Address.

―

Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.

When done, select OK at the bottom of the page, and then press E. The network test screen

6

appears and the verification process starts.

When the connection has been verified, the “Wired network and Internet connection

7

completed.” message appears.

Network Setting (Wireless)

Connecting to a Wireless Network

This product does not support wireless networking. To use wireless networks, purchase a Samsung
wireless LAN adapter (WIS10ABGN, WIS12ABGNX). Connect the adapter to the product. Use the wireless
Internet router to connect to the Internet.

Wireless IP sharer

(router having DHCP server)

The LAN Port on the Wall

Samsung Wireles LAN Adapter

LAN Cable

Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce
sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n
communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a
network connection, the video may not play smoothly.

―

You must use the “Samsung Wireless LAN adapter” (WIS10ABGN, WIS12ABGNX) to use a wireless

network. The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are
offered by select retailers, Ecommerce sites, and Samsungparts.com.

―

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the

wireless IP sharer is currently being used by another device nearby, this will result in interference and
communication failure.

―

Your product supports only the following wireless network security protocols. If you select the Pure

High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP, TKIP or TKIP AES
(WPS2Mixed) on your AP or wireless router, Samsung products will not support a connection in
compliance with new Wi-Fi certification specifications.

―

If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC

(Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure
the SSID and WPA key in either mode.

Product Panel

―

If your router, modem, or device is not certified, it may not connect to the product via the “Samsung

Wireless LAN adapter”.

―

Ensure the product is turned on before you connect the “Samsung Wireless LAN adapter”.

―

Connection Methods: You can setup the wireless network connection in three ways.

Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)

―

The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product

with a USB hub or USB extension cable other than the cable supplied with the product.

Automatic Network Setup (Wireless)

Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or Connection Information. The Connection

Information is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified

length you were asked to enter when you set up security for your wireless network. If you use this
method of setting up the network connection, and have a Connection Information for your wireless
network, you will have to enter the Pass Phrase during the the automatic or manual setup process.

When done, use the right arrow button to move the cursor to Done, and then press E. The

6

network connection screen appears and the verification process starts.

―

A connection with the router is established, but the Internet cannot be accessed.

When the connection has been verified, the “Your wireless network and Internet connection

7

are setup and ready to use.” message appears.

How to set up automatically

Set Network Type to Wireless from the Network Settings page.

1

The Network function searches for available wireless networks. When done, it displays a list of the

2

available networks.

In the list of networks, press the ▲ or ▼ button to select a network, and then press the E button

3

twice.

―

If the desired wireless router does not appear, select Refresh to search again.

―

If the router cannot be found after retrying, select the Stop button.

The Add Network button appears.
Select Add Network to add a wireless router to connect to.

If the Enter password. screen appears, go to step 5. If you select a wireless router that does not

4

have security, go to step 7.

If the router has security, enter the Enter password. (Security key or PIN).

5

Manual Network Setup (Wireless)

Offices may use static IP addresses.

If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.

Getting the Network Connection Values

To view the Network connection values on most Windows computers, follow these steps.

Right click the Network icon on the bottom right of the screen.

1

In the pop-up menu that appears, click Status.

2

On the dialog that appears, click the Support tab.

3

On the Support Tab, click the Details button. The Network connection values are displayed.

4

How to set up manually

Set Network Type to Wireless from the Network Settings page.

1

The Network function searches for available wireless networks. When done, it displays a list of the

2

available networks.

In the list of networks, press the u or d button to select a network, and then press the E button

3

twice.

―

If the desired wireless router does not appear, select Refresh to search again.

―

If the router cannot be found after retrying, select the Stop button.

The Add Network button appears.
Select Add Network to add a wireless router to connect to.

If the Enter password. screen appears, go to step 5. If you select a wireless router that does not

4

have security, go to step 7.

If the router has security, enter the Enter password. (Security key or PIN).

5

When done, use the right arrow button to move the cursor to Done, and then press E. The

6

network connection screen appears and the verification process starts.

When done, select OK at the bottom of the page, and then press E. The network test screen

10

appears and the verification process starts.

When the connection has been verified, the “Your wireless network and Internet connection

11

are setup and ready to use.” message appears.

WPS(PBC)

How to set up using WPS(PBC)

If your router has a WPS(PBC) button, follow these steps.

Set Network Type to Wireless from the Network Settings page.

1

Select WPS(PBC), press E, and then press E again.

2

Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires

3

all the network setting values it needs and connects to your network.

The network connection screen appears, and network setup is done.

4

Select Stop while network connections are being attempted. This will stop the connection.

7

Select IP Settings on network connection screen. The IP Settings screen appears.

8

Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry

9

process for each field in the IP Address.

―

Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.