SAMSUNG TB14C52, TB14C52S/XEC, TB14C52XAA, TB14C52XEC, TB14C52XEG Service manual & schematics

...

Page 1

Television Video Cassette Recorder

Chassis : C15A Model: TB14C52S/XEC TB20C52S/XET TB14C5S2S/XEG TB20C5DF2S/XEG TB14C5T2S/XEC TB20C5DF2S/XET TB14C5DT2S/XET TB20C5DT2S/XEC TB21B5DF2S/XEC

SERVICE Manual

Television Video Cassette Recorder

1. Precautions
2. Specifications
3. Disassembly and Reassembly
4. Alignment and Adjustment (Mechanical)
5. Alignment and Adjustment (Electrical)
6. Troubleshooting
7. Exploded View and Parts List
8. Electric Parts List
9. Block Diagram
10. PCB Layout
11. Wiring Diagram
12. Schematic Diagrams

Page 2

2. Specifications

The descriptions and characteristics given in this booklet are given for information purposes only and are subject to modification without notice.

TELEVISION PART Colour systems TV standards Number of channels Reception range/cable TV Aerial input	PAL(option) / SECAM(option) (UK;PAL) L/L'(option), B/G(option), D/K(option) (UK;I) 100 programmes Hyperband/interband tuner 75 Ohms, coaxial cable
VCR PART
Format	VHS standard
Heads	Video: 2 rotary heads, LP(option), 4 Heads(option) Audio/Control: 1 stationary head (linear)
Luminanco	Erase: 1 full track erase head
Colour	Down converted subcarrier phase shifted direct recording
FF/REW time	Less than 100 seconds in FF with E-120
Wow and flutter (WTD)	0.4% maximum (SP) 100 Hz - 8 KHz

GENERAL
Power supply Consumption	220-240V~, 50H2 (110-260V~, 50/60H2; option) 14" (60M)
consumption	20"/21" (90W)
Audio output power	14" (1.5W)
	20" (3W) 21" (1 5Watts x 2)
Number of loudspeakers	14"/20" (1)
·	21" (2)
Tube size	14" (37cm/34cmV)
	20 (51cm/46cmV) 21″ (55cm/51cmV)
Tube type	BLACK MATRIX
Sockets	1 full RGB SCART on the rear
	I RCA input (audio and video) on the front Earphones output (3.5 mm mini-jack)
	1 aerial/cable TV coaxial input
Dimensions (W x D x H)	14" (368.5 x 388 x 381)
	20″ (488 x 477 x 488) 21″ (520 x 405 x 508)
Weight	14" (11.7 kg)
-	20″ (20.4 kg)
Operating temperature	21″ (23.2 kg) 5°C 40°C (41°E 104°E)
Relative humidity	10% - 75%
,

Page 3

3. Disassembly and Reassembly

3-1 Disassembly

3-1-1 Back Cover Removal

1. Remove the screws located on the side of the back cover.

Page 4

3-1-2 Main Assembly Removal

1. Release two connectors between sub PCB and Main Assembly.
2. Pull the Main Assembly backwards to remove.

Page 5

3-1-3 Monitor Frame Removal

1. Remove 3 screws from the Main Assembly. Remove the dust cover.

2. Remove 4 screws from the Deck Assembly.

Page 6

3-1-4 Deck Assembly Removal

3-1-5 Main Assembly Removal

1. Remove 2 screws holding the bottom cover.
2. Remove one screw from Main PCB Assembly. Take off the deck Assembly.
1. Remove 2 screws holding the upper chassis housing.
2. Remove 3 screws holding the deck assembly.
3. Lift the deck assembly upward to remove.

Page 7

3-1-6 Top Cabinet Removal

1. Remove two (2) screws located at the rear of the top cabinet.
2. Carefully lift the back of the top cabinet and shield it to the rear to remove.

3-1-7 Top Cabinet Removal

3-1-8 Top Cabinet Removal

Page 8

4. Alignments and Adjustments (Mechanical)

4-1 Deck Parts Locations

4-1-1 Deck (Top View)

BRACKET FL TOP GEAR FL CAM MOTOR LOADING ASS'Y LEVER FL ARM ASS'Y HOLDER FL CASSETTE ASS'Y LEVER FL DOOR SLIDER FL DRIVE

Page 9

4-1-2 Deck (Top View)

Page 10

Fig. 4-3 Bottom Parts Location

GEAR JOINT 1 GEAR JOINT 2 BRAKET GEAR MOTOR CAPSTAN ASS'Y LEVER T LOAD ASS'Y GEAR LOADING DRIVE LEVER S LOAD ASS'Y

BELT PULLEY SLIDER CAM SLEEVE TENSION

Page 11

4-2 Main Deck

4-2-1 Braket FL Top Removal

1. Remove 2 screws 1 .
2. Remove the Bracket FL Top 2 .

Note : Take care not to change assembly direction.

4-2-2 Lever FL Door Removal

1. Rotate the Lever FL Door 1 in the direction of arrow "A".
2. Release the Hook ②, remove the Lever FL Door① in the direction of arrow "B".

Fig. 4-4 Braket FL Top Removal

Fig. 4-5 Lever FL Door Removal

Page 12

4-2-3 Holder FL Cassette Ass'y Removal

1. Remove the Lever FL Door. (Refer to Fig. 4-5
2. Pull the Holder FL Cassette Ass'y 1 to the eject position.
3. Pull the Holder FL Cassette Ass'y ① as grasping the Holder FL Cassette Ass'y ① and Lever FL Cassette-R ② in the same time to release hooking from Main Base until the Boss [A], [B] of Holder FL Cassette Ass'y ① is taken out from the Rail [C], [D].
4. Lift the Holder FL Cassette Ass'y ① in the direction of arrow "B" in this time, you have to grasp the Lever FL Cassette-R ② continuously until the Holder FL Cassette Ass'y ① is taken out completely.
Note : Be sure to insert Lever FL Cassette-R 2 in the direction of "A" to prevent separation and breakage of the Lever FL Cassette-R 2 at disassembling and reassembling.

4-2-4 Lever FL Arm Ass'y Removal

1. Remove the Lever FL Door. (Refer to Fig. 4-5
2. Remove the Holder FL Cassette Ass'y. (Refer to Fig.4-6)
3. Release the Hook ① in the direction of arreow "A", pull out the Lever FL Arm Ass'y ④ from the Boss of Main Base.
4. Remove the Lever FL Arm Ass'y ④ in the direction of arrow "B".

Assembly : When reinstalling, be sure to reassemble Lever FL Arm Ass'y 4 after you insert the Boss in Groove [A] of Slider FL Drive 3.

Fig. 4-6 Holder FL Cassette Ass'y Removal

Fig. 4-7 Lever FL Arm Ass'y Removal

Page 13

Alignments and Adjustments (Mechanical)

4-2-5 Slider FL Drive Removal

1. Pull the Slider FL Drive 1 to the front direction.
2. Remove the Slider FL Drive 1 in the direction of arrow. (Refer to Fig. 4-8)

Fig. 4-8 Slider FL Drive Removal

4-2-6 Bracket Gear, Gear FL Cam, Gear Joint 1, 2 Removal

1. Remove screw ① .
2. Lift the Bracket Gear 2 .
3. Remove the Gear FL Cam 3 .
4. Lift the Gear Joint 2 ④, Gear Joint 1 ⑤.

Fig. 1-9 Bracket Gear, Gear FL Cam, Gear Joint 1, 2 Removal

Page 14

4-2-7 Assembly of Gear FL Cam, Gear Joint 1, 2

Be sure to align dot mark of Gear Joint 1 with dot mark of Gear Joint 2 as shown Fig. 4-10 (Refer to Timing Point 1), confirm the Timing Point 2 of the Gear Joint 2 and Slider Cam 3.
Align the Gear FL Cam with the Gear Worm Wheel Post as shown detail drawing. (Refer to Timing Point 3)

4-2-8 Holder Worm, Gear Worm, Gear Worm Wheel Removal

1. Release the Hook [A] in the direction of arrow and, remove the Holder Worm ① .
2. Remove the Gear Worm 2 .
3. Remove the Gear Worm Wheel ③. (After removing the Gear FL Cam as shown Fig. 4-9)
Note : Secure the Hook [A] after installing the Holder Worm ① .

Fig. 4-11 Holder Worm, Gear Worm, Gear Worm Wheelemoval

Fig. 4-10 Assembly of Gear FL Cam, Gear Joint 1,2

Page 15

Alignments and Adjustments (Mechanical)

4-2-9 Motor Loading Ass'y Removal

1. Remove the screw 1 .
2. Remove the Motor Loading Ass'y 2 .

Fig. 4-12 Motor Loading Ass'y Removal

4-2-10 Gear Loading Drive, Slider Cam, Lever T, S Load Ass'y Removal

1. Remove the Belt Pulley. (Refer to Fig. 4-29)
Remove the Gear Loading Drive ① after releasing Hook [A] in the direction arrow as shown in detail drawing.
3. Remove the Slider Cam 2 .
4. Remove the Lever T, S Load Ass'y 3, 4.

Fig. 4-13 Gear Loading Drive, Slider Cam, Lever T, S Load Ass'y Removal

Page 16

4-2-11 Assembly of Gear Loading Drive, Slider Cam, Lever T, S Load Ass'y

When reinstalling, be sure to align dot of Lever T Load Ass'y vith dot of Lever S Load Ass'y as shown in drawing. (Refer to Timing Point 1
Insert the Pin A, B, C, D into the Slider Cam hole.
3. Be sure to align dot of Lever T Load Ass'y and dot of Gear Loading Drive ④. (Refer to Timing Point 2)
4. Align dot of Gear Loading Drive with mark of Slider Cam as shown in drawing. (Refer to Timing Point 3)

Fig. 4-14 Assembly of Gear Loading Drive Slider Cam, Lever T, S Load Ass'y

4-2-12 Lever Tension Ass'y, Band Brake Ass'y, Sleeve Tension Removal

1. Remove the Spring Tension ① .
In bottom side of Deck, remove the Sleeve Tension 2 after rotating it right or left as liftinig locking edge of Sleeve Tension.
3. Remove the side "a" of the Band Brake Ass'y ④ in the direction of arrow "A" from the Lever Tension Ass'y ⑤.
4. Remove the side "b" of the Band Brake Ass'y in the direction of arrow "B" from the Main Base.

Note :

1. When replacing the Lever Tension Ass'y, be sure to apply oil in the Sleeve Tension.
2. Take care not to touch stain on the felt side, and not to be folded and broken Band Brake Ass'y.

Fig. 4-15 Lever Tension Ass'y, Band Brake Ass'y, Sleeve Tension Removal

Page 17

4-2-13 Lever S, T Brake Ass'y Removal

1. Release the Hook [A] and the Hook [B], [C] in the 1 Push the Lever Idle 1 in the direction of arrow direction of arrow as shown in Fig. 1-16.
2. Lift the Lever S. T Brake Ass'v 1 , 2 with Spring 2. Lift the Lever Idle 1 . Brake 🚯

Assembly :

1. Assemble the Lever S Brake Ass'y ① on the Main 2. Assemble the Gear Idle ② with the Lever Idle ①. Base.
2. Assemble the Lever T Brake Ass'y 2 with Spring Note : When replacing the Gear Idle 2 , be sure to Brake 🚯
Note : Take extreme care not to folded or transform the spring Brake while removing or reinstalling.

4-2-14 Lever Idle Ass'y Removal

"A", "B".

Assembly :

1. Apply oil in two Bosses of Lever Idle 1 .
add oil in the boss of Lever Idle

Fig. 4-17 Lever Idle Ass'y Removal

Fig. 4-16 Lever S, T Brake Ass'y Removal

🛛 GEAR IDI F

Page 18

4-2-15 Disk S, T Reel Removal

1. Lift the Disk S, T Reel 1 , 2 .

Fig. 4-18 Disk S, T Reel Removal

4-2-16 Holder Clutch Ass'y Removal

1. Remove the Washer Slit ① .
Lift the Holder Clutch Ass'y 2 .

Fig. 4-19 Holder Clutch Ass'y Removal

Page 19

4-2-17 Lever Up Down Ass'y, Gear Center Ass'y Removal

Remove the 2 hooks in the direction of arrow as shown Fig. 1-20 and lift the Lever Up Down Ass'y O.
2. Lift the Gear Center Ass'y 2 .

Fig. 4-20 Lever Up Down Ass'y, Gear Center Ass'y Removal

4-2-18 Assembly of Lever Up Down Ass'y, Gear Center Ass'y

1. Insert the Lever Up Down Ass'y 1 in the 2 rectangular holes on Main Base.
Lift the Lever Up Down Ass'y ① about 35 degree. (Refer to Fig. 1-21)
Insert Ring ④ of the Gear Center Ass'y ② in the Guide ⑤ of the Lever Up Down Ass'y ①.
4. Insert the Gear Center Ass'y 2 in the post 6 on Main Base.
5. Push down the Lever Up Down Ass'y ● for locking of the Hook ● .

Note :

1. Take care not to separate and loose the Spring Up Down.
2. When assembling the Gear Center Ass'y, don't push down too much.

Fig. 4-21 Assembly of Lever Up Down Ass'y, Gear Center Ass'y

Page 20

4-2-19 Guide Cassette Door Removal

1. Lift the Hook [A].
2. Rotate the Guide Cassette Door ① in the direction 1. Lift the Unit Pinch Ass'y ①. of arrow.
Note : After reinstalling the Guide Cassette Door secure the Hook [A].

Fig. 4-22 Guide Cassette Door Removal

4-2-20 Unit Pinch Ass'y, Plate Joint, Spring Pinch Drive Removal

- 2. Remove the Plate Joint 2 from Lever Pinch Drive.
- 3. Remove the Spring Pinch Drive ③

Note :

1. Take extreme care not to touch the grease on the Roller Pinch.
2. When reinstalling, be sure to apply grease on the post pinch roller.

Fig. 4-23 Unit Pinch Ass'y, Plate Joint, Spring Pinch Drive Removal

Page 21

4-2-21 Lever #9 Guide Ass'y Removal

1. Remove the Spring #9 Guide ①
2. Lift the Lever #9 Guide Ass'y 2 in the direction 2. Lift the FE Head 2 . of arrow.

Note :

1. Take extreme care not to touch the grease on the tape Guide Post.
2. After reinstalling, check the bottom side of the Post #9 Guide to stick to the top side of Main Base.

Fig. 4-24 Lever #9 Guide Ass'y Removal

4-2-22 FE Head Removal

1 Remove the screw 1

Fig. 4-25 FE Head Removal

Page 22

4-2-23 ACE Head Removal

1. Pull out the FPC from connector of ACE Head Ass'y 2 .
2. Remove the screw ① .
3. Lift the ACE Head Ass'y 2 .

Fig. 4-26 ACE Head Removal

4-2-24 Slider S, T Ass'y Removal

1. Move the Slider S, T Ass'y ① , ② to slot, and then lift it to remove. (Refer to arrow)

Fig. 4-27 Slider S, T Ass'y Removal

Page 23

4-2-25 Cylinder Ass'y Removal

1. Remove the 3 Screws 1 , 3 , 5 .
Remove the Plate Cylinder A, B, C 2, 4, 6 in the direction of arrow.
3. Lift the Cylinder Ass'y 7 .

Note :

When reinstalling, push the Plate Cylinder A, B (a) (b) in the reverse of arrow and then, tighten the 2 Screws (a), (b).
2. Take care not to touch the Cylinder Ass'y and the tape guide post at reinstalling Plate Cylinder C2
Take care not to touch the Cylinder Ass'y with screw driver at reinstalling the Plate Cylinder C2.

Fig. 4-28 Cylinder Ass'y Removal

4-2-26 Belt Pulley Removal

1. Remove the Belt Pulley ①
Note : Take extreme care not to touch the grease on Belt Pulley 1 at assembling or reassembling.

Fig. 1-29 Belt Pulley Removal

4-2-27 Lever Head Cleaner Ass'y Removal (Optional)

1. Release the Hook 1 .
2. Lift the Lever Head Cleaner Ass'y 2 .

Fig. 4-30 Lever Head Cleaner Ass'y Removal

Page 24

4-2-28 Motor Capstan Ass'y Removal

1. Remove the 3 Screws ① .
2. Remove the Motor Capstan Ass'y 2 .

Assembly :

1. Match the 3 holes of Motor Capstan Ass'y 2 to the 3 holes of Main Base as attending not to drop or knock the Motor Capstan Ass'y.
2. Tighten the 3 Screws in the direction of arrow as shown detail drawing.

Note :

1. Don't reuse the removed screws from Motor Capstan Ass'y.
After tightening screws, check if there is gap between the head of screws and the top side of Main Base. There should have no gap between the head of screws and the top side of Main Base.
3. After reinstalling, adjusting the tape transport system again.

Fig. 4-31 Motor Capstan Ass'y Removal

4-2-29 How to Manually Eject the Cassette Tape

Remove the Holder worm 1 and the Gear Worm 2.
2. Turn the Gear Worm Wheel ③ counterclockwise with screw driver. (Refer to arrow)

Fig. 4-32

3. As Sliders S and T are approched in the unloading position, rotate holder Clutch counterclockwise after inserting screw driver in the hole of frame's bottom (in order to wind the unwinded tape). (Refer to Fig. 4-33)

If you rotate Gear Worm Wheel continuously when tape is unwinding, you may cause tape contamination by grease and tape damage. Be sure to wind horizontally.

Rotate Gear Worm Wheel ③ counterclockwise using screw driver, up to the state of eject mode, and then pick out the tape. (Refer to Fig. 4-32)

Fig. 4-33

Page 25

4-3 Lubrication and recommended replacement time for principal parts

The recommended replacement time is shorter than the design maximum. Table 1-1 assumes VCR is in normal environment (normal temperature, normal humidity). The checking period may be changed based on the manner of use, runtime and environmental conditions.

3. Life of the Cylinder Ass'y depends on the manner of use.
4. See exploded view for location of each part.

<Thale 1-1>

*	Dorte Nome				Che	ecking P	eriod					Domark
	Parts Name	500	1000	1500	2000	2500	3000	3500	4000	4500	5000	Remark
	POST TENSION	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	T
Т	SLANT POST S, T	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	- To clean the parts, use patch and alcohol (solvent).
A	#8 GUIDE SHAFT	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ
Р	CAPSTAN SHAFT	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	- After cleaning, use the video
E	#9 GUIDE POST	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	awny completely.
Р	#3 GUIDE POST	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	Δ	10/2
A	GUIDE ROLLER S, T	Δ	Δ	Δ	0	0	0	0	0	0	0	- vve recomnend to use oil [EP-56] or solvent.
H	CYLINDER ASS'Y	Δ	0	0	0	0	0	0	0	0	0	[]
	FE HEAD	Δ	Δ	Δ	0	0	0	0	0	0	0	- One or two drops of oil
S	ACE HEAD	Δ	0	0	0	0	0	0	0	0	0	ing with alcohol.
S	PINCH ROLLER	Δ	0	0	0	0	0	0	0	0	0	•
T	POST REEL S, T		٠		٠		٠		٠		٠	- Periodic time of applying oil
L E	SLEEVE TENSION		٠		٠		٠		٠		٠	(Apply oil after cleaning)
	POST CENTER		٠		٠		٠		٠		٠	may be the cause of malfunc-
	LEVER IDLE BOSS (2Point)		٠		٠		٠		٠		٠	tion.
D	CAPSTAN MOTOR PULLEY	Δ	Δ	Δ	Δ	Δ	0	0	0	0	0
RY	BELT PULLEY				0	0	0	0	0	0	0
V S	HOLDER CLUTCH ASS'Y	Δ	0	0	0	0	0	0	0	0	0
I T	GEAR CENTER ASS'Y		0	0	0	0	0	0	0	0	0
N E	GEAR IDLE (2Point)		0	0	0	0	0	0	0	0	0
G	LOADING MOTOR		0	0	0	0	0	0	0	0	0
B SYS	BAND BRAKE ASS'Y		0	0	0	0	0	0	0	0	0
K E	BRAKE T ASS'Y		0	0	0	0	0	0	0	0	0

A : Cleaning

O: Check and replacement in necessary

• : Add Oil

Page 26

4-4 Tape Transport System and Adjustment Locations

The tape transport system has been adjusted precisely in the factory. Alignment is not necessary except for the following :

1. Noise observed on the screen.
2. Tape damage.
3. Parts replacement in the tape transport system.

Lower flange height of tape guide is used as the reference for the transport adjustment. To maintain the height of the tape guide and prevent damage, do not apply excessive force onto the main base.

Fig. 4-4-2 Tape Travel Diagram

Page 27

4-5 Tape Transport System Adjustment

When parts are replaced, perform the required adjustments by referring to precedures for the tape transport system. If there are any changes to the tape path, first run a T-120 tape and make sure excessive tape wrinkle does not occur at the tape guides.

1. If tape wrinkle is observed at the guide roller S, T, turn the guide roller S, T until wrinkle disappears.
2. If the tape wrinkle is still observed at the tape guide, perform the tilt adjustment of the ACE head. (See page 5-3 of the Service Manual for Test Point Locations.)

4-5-1 ACE Head Assembly Adjustment

4-5-1(a) ACE HEAD HEIGHT ADJUSTMENT

1. Run the alignment tape (Color bar) in the playback mode.
2. Observe surface of the audio head using a dental mirror.
Turn screw (C) clockwise or counterclockwise until the gap of lower tape edge and the lower edge of the control head is about 0.25mm. (Refer to Fig. 4-5-1 and 4-5-2)

Fig. 4-5-1 Location of ACE Head Adjustment Screw

Fig. 4-5-2 ACE Head Height Adjustment

Page 28

4-5-1(b) ACE HEAD TILT ADJUSTMENT

1. Playback a blank T160(E-240) tape and observe the position of the tape at the lower flange of tape guide.
2. Confirm that there is no curl or wrinkle at the lower flange of tape guide (see figure).
3. If a curl or wrinkle of the tape occurrs, turn screw "C" slighty clockwise until the wrinkle disappears (see figure).
4. Reconfirm the A/C head height.

4-5-1(c) AUDIO AZIMUTH ADJUSTMENT

1. Play backthe alignment tape (mono scope). (NTSC : 7KHz ; PAL : 6KHz).
2. Connect channel-1 scope probe to audio out on the Main PCB.
3. Adjust screw (B) for maximum audio level. (See Fig. 4-5-1)
4-5-1(d) ACE HEAD POSITION (X-POINT) ADJUSTMENT (PAL SYSTEM ONLY)
1. On the remote control, press the "1" button and "Input" simultaneously. This will automatically adjust the tracking center.
2. Play back the mono scope alignment tape.
3. Connect Ch1 scope probe to "CTRL" and Ch2 scope probe to "H'D SW". Trigger on the head-switching pulse.
4. Set the tracking preset to 7 msec, and 2H'D to 2 msec. Use the "Fine" tracking buttons ▲ / ▼ on the remote control.
5. Connect Ch1 scope probe to "ENV"; connect Ch-2 to "H'D SW" and trigger on Ch-1.
6. Insert the adjusting gear. Adjust the driver in either direction for maximum envelope wave form.
Note: Since the adjusting gear unit may be damaged, do not adjust X-point by using force. After turning the X-point adjusting screw (D) slightly counterclockwise, perform the adjustment and then tighten the screw.

Fig. 4-5-5 Control Pulse Adjustment

Page 29

4-5-1(e) A/C HEAD POSITION (X-POINT). ADJUSTMENT (PAL SYSTEM ONLY)

1. Play back the mono scope alignment tape.
Connect Ch1 scope probe to "CTRL" and Ch-2 scope probe to "H'D SW". Trigger on the head-switching pulse.
3. Set the tracking preset to 7 msec using the "Fine" tracking buttons ▲ / ▼ on the remote control.
4. Connect Ch1 scope probe to "ENV"; connect Ch-2 to "H'D SW" and trigger on Ch-1.
Insert the adjusting driver (+) into the X-position adjusting gear. Adjust the driver in either direction for maximum envelope waveform.
Note: Since the adjusting gear unit may be damaged, do not adjust the X-point by using force. After turning the X-point adjusting screw (D) slightly counter-clockwise, perform the adjustment and then tighten the screw.

Fig. 4-5-5 Tracking Preset and Control Adjustment Only for Models. SV-20U/30U/40U/60U/100U VR3705/VR3805/5705/5805/8705

Only for Models: sv-70U/90U/120U/140U/160U VR5805/VR5855/5905/8905

Page 30

4-5-2 Linearity adjustment (Guide roller S. T adjustment)

1. Playback the Mono Scope alignment tape (SP mode).
2. Observe the video envelope signal on an oscilloscope (triggered by the video switching pulse).
3. Make sure the video envelope waveform (at itsminimum) meets the specification shown in Fig. 4-5-7. If it does not, adjust as follows :

Noto

a=Maximum output of the video RF envelope.
b=Minimum output of the video RF envelope at the entrance side
c=Minimum output of the video RF envelope at the center point.
ENVELOPE d=Maximum output of the video RF envelope at the exit side.
4. If the section A in Fig. 4-5-8 does not meet the specification, adjust the guide roller S up or down
5. If the section B in Fig. 4-5-8 does not meet the specification, adjust the guide roller T up or down.
6. Play back the Mono Scope alignment tape (SP mode).
7. Connect an oscilloscope CH-1 to the Envelope and CH-2 to the H'D SW Pulse for triggering
8. Turn the guide roller heads with a flat head ( 🗖 ) driver to obtain a flat video RF envelope as shown in Fig. 4-5-9.

PULSE

c,b,d/a ≧ 63% Fig. 4-5-7 Envelope Waveform Adjustment

Fig. 4-5-8 Adjustment Points

Page 31

4-5-3 Check Transition from RPS to Play

Check transition from RPS mode to play mode : Using a pre-recorded SP tape, make sure the entry side of envelope comes to an appropriate steady state within 3 seconds (as shown in Fig. 4-5-10).

If the envelope waveform does not reach specified peak to peak amplitude within 3 seconds, adjust as follows :

1. Make sure there is no gap between the supply roller lower flange and the tape. If there is a gap, adjust the supply guide roller again.
2. Change operation mode from the RPS to the play mode (again) and make sure the entry side of envelope rises within 3 second.

Fig. 4-5-10 Video Envelope Rising when Operation mode Changes from RPS to Play Mode

4-5-4 Envelope Check

1. Make recordings on T-120 (E-120) and T-160 (E-180) tape.

Make sure the playback output envelope meets the specification as shown in Fig. 2-10.

2. Play back a self recorded tape (recording made on the unit using with T-120 (E-120).

The video envelope should meet the specification as shown in Fig. 4-5-11. In SP mode, (A) should equal (B).

If the head gap is wide, upper cylinder should be checked.

Fig. 4-5-11 Envelope Output and Output Level

2-2-5 Tape Wrinkle Check

1. Run the T-160 (E-180) tape in the playback, FPS, RPS and Pause modes and observe tape wrinkle at each guide.
2. If excessive tape wrinkle is observed, perform the following adjustments in Playback mode :
Tape wrinkle at the guide roller S, T section : Linearity adjustment.
Tape wrinkle at tape guide flange : ACE head assembly coarse adjustment.

4-6 Reel Torque

1. The rotation of the capstan motor causes the Holder Clutch Ass'y to rotate through the Belt Pulley.
2. The spring wrap PLAY/REV of holder clutch ass'y drives the disk reel S, T through gear idle by rotation of gear center ass'y.
3. Brake is operated by slider cam at FF/REW mode.
Transportation of accurate driving force is done by gears. (Gear Center Ass'y)
Note : If the specifications are not met, replace the holder clutch ass'y and then recheck.

MODE

GAUGE

סס

NTSC

82.5 ± 27.5

Cassatta Tarquamatar

PAL

79 ± 27

t casselle iorquemeter

RPS

145 ±

Cassette Torquemeter

Page 32

4-7 Location Adjustment and Confirmation of Tension Post

1. Remove the holder cassette ass'y and then push the lever FL Arm-R to the direction of loading.
2. Push the lever tension drive ① in the direction of arrow. (See Fig. 4-5-12)
3. Turn the gear worm wheel ② clockwise so that "Timing Point" of the slider FL drive ③ and gear FL cam ④ can be aligned (See Fig. 4-5-13)

Fig.4-5-12

Fia. 4-5-13

4. Rotate Disk S Reel ① clockwise and do the adjustment in the region around the Main Base (in shape of slit). Clockwise or counterclockwise after inserting it turn the screw driver in the slit on the Main Base. Adjust the left end edge of Lever Tension Ass'y ③ to 1.3 +1.5/-0.5mm (from the location of mark in the Main Base).
5. Rotate Disk S Reel ① , and double-check the location of the left end edge of Lever Tension Ass'y, and the amount of crossing from the mark on Main Base. (+1.0/-0.5mm)

Counterclockwise : Torque UP Clockwise : Torque DOWN

Back Tension should be 56 ± 15g.cm (use a Back Tension Meter).

Fig. 4-5-14 Tension Pole and Back Tension Adjustment

Note :

1 Mark on Main Base is located about 1.3mm from inside of curved line.
2 Be careful not to deform the region of adjustment around the Main Base (up or down).

Page 33

5. Alignment and Adjustments (Electrical)

5-1 Preadjustment

5-1-1 Factory Mode

1. Do not attempt these adjustments in the Video Mode.
2. The Factory Mode adjustments are necessary when either the EEPROM (IC902) or the CRT is replaced.
3. Do not tamper with the "Adjustment" screen of the Factory Mode menu. This screen is intended only for factory use.

5-1-2 When EEPROM (IC902) Is Replaced

1. When IC902 is replaced all adjustment data revert to initial values. It is necessary to reprogram this data.
2. After IC902 is replaced, warm up the TV for 10 seconds.

5-2 Factory ("Service") Mode

5-2-1 Procedure for the "Adjustment" Mode

1. This mode uses the standard remote control. The Service Mode is activated by: (1) pressing the "FACTORY" service key on the local-keyboard, or (2) by entering the following remotecontrol sequence (within 2 seconds):

STAND-BY →DISPLAY →MENU→ MUTE→ POWER ON

2. The "SERVICE (FACTORY)" message will be displayed. The Service Mode has three components: Adjustment, Option Bytes and Reset.
Access the Adjustment Mode by pressing the "VOLUME" keys (Up or Down). The adjustment parameters are listed in the accompanying table, and selected by pressing the CHAN-NEL keys (▲,▼).

5-1-3 When CRT Is Replaced

Make the following adjustments after setting up purity and convergence:

White Balance Sub-Brightness Vertical Center Vertical Size Horizontal Size

4. Selection sequences for the PAL/SECAM B/G, L systems:

down or up key: AGC>VCO>AFW>SBT>SCT>SCR>RG>GG> BG>TCT>SC>SL>VA>PVS>PHS>CDL>BKS

5. The VOLUME keys increase or decrease the adjustment values, (stored in the non-volatile memory) when Adjustment Mode is cancelled.

Page 34

5-2-2 Main Adjustment Parameters

Table 5-1 Main Adjustment Parameters (Sonyµ-com) with TTX
FUNCTION	OSD ABBREVIATION	RANGE	INITIAL DATA
AUTO GAIN CONTROL	AGC	0 ~ 63 STEP	12
SUB BRIGHT	SBT	0 ~ 13 STEP	6
SUB CONTRAST	SCT	0 ~ 13 STEP	14" : 06 20/21" : 10
SUB COLOR	SCR	0 ~ 13 STEP	14" : 06 20/21" : 04
SUB TINT	STT	0 ~ 13 STEP	9
RED GAIN	RG	0 ~ 63 STEP	38
GREEN GAIN	GG	0 ~ 63 STEP	32
BLUE GAIN	BG	0 ~ 63 STEP	33
TELETEXT CONTRAST	TCT	0 ~ 38 STEP	04
VERTICAL SLOPE	SL	0 ~ 63 STEP	28
PAL VERTICAL SHIFT	PVS	0 ~ 63 STEP	30
VERTICAL AMPLITUDE	VA	0 ~ 63 STEP	43
PAL HORIZONTAL SHIFT	PHS	0 ~ 63 STEP	33
CATHOD DRIVE LEVEL	CDL	0 ~ 07 STEP	14" : 03 20/21" : 04
NTSC VERTICAL AMPLITUDE	NVS	0 ~ 63 STEP	30
BLACK STRETCHER	BKS	0 ~ 01 STEP	01
NTSC HORIZONTAL SHIFT	NHS	0 ~ 63 STEP	46
AUTO FREQUENCY WINDOW	AFW	0 ~ 01 STEP	00
S-CORRECTION	SC	0 ~ 63 STEP	14/20" : 00 21" : 11

NOTE :

PVS, PVA, PHS, NVS, NVA, NHS parameters must be aligned using both the 50 Hz and 60 Hz vertical-field rates.

5-2-3 AGING Mode (Reference Only)

This pattern is used for pre-heating the CRT during manufacturing--it is accessed in the factory by twice pressing the "FACTORY" key .

Even if the TV power is cut off, the Aging Mode is not cancelled. The "AGING" marking is displayed on the screen. The AGING mode is cancelled by repressing the "FACTORY" key.

Page 35

5-2-4 Option

BIT	ITEM	0	1
7	TTX	NO TTX	TTX
6	TTX SYSTEM	LIST FIRST	FLOF FIRST
5	CONTRAST	70	90
4	TUNER QUANTITY	1	2
3	_	_	_
2	SYSTEM (L)
1	SYSTEM (D/K)
0	SYSTEM (I)

1. After an option is modified, the system must be reset in order for the change to take effect.

2. Bit 6 : TTX System. This bit reverts to its initial value during Power ON.

3. Bit 5 : After a "Factory Reset", the Contrast Option determines the contrast level during Memory Mode.

4. Bit 3 : Not used.

5. Bits 2,1,0 :

#2	#1	#0	AREA	COLOR SYSTEM	SOUND SYSTEM
(L)	(D/K)	(I)
0	0	0	WEST, SCAN	AUTO, PAL, SECAM	Х
0	0	1	UNITED KINGDOM ®	AUTO, PAL	Х
0	1	0	EAST,CIS	AUTO, PAL, SECAM	AUTO, B/G, D/K
0	1	1	CHINA, HONG KONG	AUTO, PAL, SECAM	AUTO, B/G, D/K, I
1	0	0	FRANCE	PAL/SECAM, FRANCE ®Ë	Х
1	0	1	ITALY	AUTO, PAL	Х
1	1	0	OCEANIA	AUTO PAL	Х
1	1	1	NOT USED (DEFAULT OPERATION = WEST, SCAN)

Note1: United Kingdom: 468 - 900MHz (UHF only) Others: 40 - 900 MHz

Note2: Color decoder mode is always "auto"

SYSTEM	MODULATION STANDARD	COLOUR DECODER MODE
PAL/SECAM	NEGATIVE	AUTO
FRANCE	POSITIVE	AUTO

Page 36

5-2-5 Option 2

BIT	ITEM	0	1
7	NOT USED
6	NOT USED
5	SHARPNESS	OFF	ON
4	PDC	NO	YES
3	VPS	NO	YES
2	3.58 X-TAL	NO	YES
1	VIDEO PLUS	NO	YES
0	SHOWVIEW	NO	YES

Notes:

Bit 5 : Sharpness ON : When this bit=1, the peaking will be activated.

Bits 4, 3 : VPS and VDC cannot exist simultaneously. (The same appliese for VIDEO PLUS and SHOWVIEW)

5-2-6 VCR Option

BIT	ITEM	0	1
7	NOT USED
6	NOT USED
5	NOT USED
4	HEAD	2-HEAD	4-HEAD
3	SP/LP	SP ONLY	SP/LP
2	SECAM	N/A	POSSIBLE
1	MESECAM	N/A	POSSIBLE
0	NTSC3.58	N/A	POSSIBLE

5-3 Reset

The Reset Mode is used during factory inspection. Function Reset : After Factory Reset, the following items revert to their initial values.

1.	Volume	10
2.	Program Channel	0
3.	P-STD	MEMORY
4.	Auto Power	OFF
5.	NR	OFF
6.	Reserved Timer Recording	ALL CLEAR
7.	Skip (Store/Clear)	ALL CLEAR

Caution : When the EEPROM is replaced, all items revert to their initial values.

Page 37

5-4 Other Adjustments

5-4-1 General

Usually, a color TV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync and focus.
2. The picture should have good black and white details. There should be no objectionable color shading; if color shading is present, perform the purity and convergence adjustments described below.
3. Use the specified test equipment or its equivalent.
4. Correct impedance matching is essential.
5. Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV. When inserting signal markers, do not allow the marker generator to distort test results.
6. Connect the TV only to an AC power source with voltage and frequency as specified on the backcover nameplate.
7. Do not attempt to connect or disconnect any wires while the TV is turned on. Make sure that the power cord is disconnected before replacing any parts.
8. To protect against shock hazard, use an isolation transformer.

5-4-2 Automatic Degaussing

A degaussing coil is mounted around the picture tube, so that external degaussing after moving the TV should be unnecessary. But the receiver must be properly degaussed upon installation.

The degaussing coil operates for about 1 second after the power is switched ON. If the set has been moved or turned in a different direction, disconnect its AC power for at least 10 minutes.

If the chassis or parts of the cabinet become magnetized, poor color purity will result. If this happens, use an external degaussing coil. Slowly move the degaussing coil around the faceplate of the picture tube and the sides and front of the receiver. Slowly withdraw the coil to a distance of about 6 feet before removing power.

5-4-3 High Voltage Check

CAUTION: There is no high voltage adjustment on this chassis. The B+ power supply must be set to +125 volts (Full color bar input and normal picture level).

1. Connect a digital voltmeter to the second anode of the picture tube.
2. Turn on the TV. Set the Brightness and Contrast controls to minimum (zero beam current).
3. The high voltage should not exceed 27.5KV.
4. Adjust the Brightness and contrast controls to both extremes. Ensure that the high voltage does not exceed 27.5KV under any conditions.

Page 38

5-4-4 FOCUS Adjustment

1. Input a black and white signal.
2. Adjust the tuning control for the clearest picture.
3. Adjust the FOCUS control for well defined scanning lines in the center area of the screen.

5-4-5 Screen Adjustment

1. Turn to the ACTIVE channel.
2. Adjust the VR screen for a normal picture is (no blooming or flyback line).
3. Adjust the FOCUS control for well defined scanning lines in the center area of the screen.

5-4-6 Purity Adjustment

1. Warm up the receiver for at least 20 minutes.
2. Plug in the CRT deflection yoke and tighten the clamp screw.
3. Plug the convergence yoke into the CRT and set in as shown in Fig. 5-1.
4. Input a black and white signal.
5. Fully demagnetize the receive by applying an external degaussing coil.
6. Turn the CONTRAST and BRIGHTNESS controls to maximum.
7. Loosen the clamp screw holding the yoke. Slide the yoke backward or forward to provide vertical green belt. (Fig. 5-2).
8. Tighten the convergence yoke.
9. Slowly move the deflection yoke forward, and adjust for the best overall green screen.
10. Temporarily tighten the deflection yoke.
11. Produce blue and red rasters by adjusting the low-light controls. Check for good purity in each field.
12. Tighten the deflection yoke.

Page 39

Fig. 5 -1 Convergence Magnet Assembly

Fig. 5-2 Center Convergence Adjustment

5-4-7 White Balance Adjustment

5-4-7 (A) HIGH-LIGHT ADJUSTMENT

1. Input either a Lion Head or a "pure white" pattern.
2. Warm up the TV for 30 minutes.
3. Check the data in the Service Mode
4. Adjust RG, BG in the Factory Mode.

5-4-7 (B) LOW-LIGHT ADJUSTMENT

1. Automatically accomplished during the high-light adjustment.

Page 40

5-4-8 Center Convergence Adjustment

1. Warm up the receiver for at least 20 minutes.
2. Adjust the two tabs of the 4 pole magnets to change the angle between them. Superimpose the red and blue vertical lines in the center area of the screen.
3. Adjust the Brightness and Contrast controls for a well defined picture.
4. Adjust the two-tab pairs of the 4 pole magnets, and change the angle between them. Superimpose the red and the blue vertical lines in the center area of the screen.

5. Turn the both tabs at the same time, keeping the angle constant, and superimpose the red and blue horizontal line in the center of the screen.
6. Adjust the two-tab pairs of the 6-pole magnets to superimpose the red and blue line onto the green. (Changing the angle affects the vertical lines, and rotating both magnets affects the horizontal lines.)
7. Repeat adjustments 2~6, if necessary.
8. Since the 4-pole magnets and 6-pole magnets interact, the dot movement is complex (Fig. 5-3).

Fig 5-3 Center Convergence Adjustment

5-4-9 Dual Tuner AFT Adjustment

Test Equipment

1. TV Generator (PM5518,PM5418,ETC.) 2. DC VOLTMETER

1. Connect DC Voltmeter to AFT terminal of TUNER IF-MODULE.
2. After selecting P00, input to IF1 terminal of TU002 (38.9 MHz Using PM5518)
3. After selecting P00, set to 2.5V ± 0.2V (Using FRANCE : T101, PAL/SCAM B/G,I,D/K : L102)

Page 41

5-5 Electrical Adjustment (VCR Section)

5-5-1 Preparation

Electrical adjustments are required after replacing circuit components and certain mechanical parts. It is important to perform these adjustment only after all repairs and replacements have been com pleted. Also, do not attempt these adjustments unless the proper equipment is available.

5-5-2 Required Test Equipment

1. Color Television or Monitor
Oscilloscope : Wide-band, dual-trace, triggered delayed sweep.
3. DC Voltmeter
4. TV CH Generator
5. Attenuator
6. Recording tape. (Blank tape)
7. Pattern Generator : PAL color bar. 100% White.

Fig. 5-4 Alignment Tape

Fig. 5-5 Color bar signal of pattern generator

Fig. 5-6 Color bar signal of alignment tape (75% Color Bars)

Page 42

5-5-3 PROGRAM SW

FL SW : ON-less than 3.5v / OFF-more than 3.5v (Input to A/D port, START / END SENSOR : ON-"L". OFF-"H" : DON'T CARE

POSITION	PRO	ogram s	/W	TAPE	SEN	OPERATION MODE
	А	В	С	S	F
STANBY	0	0	0	0	0	Eject
POWER OFF	0	0	0	1	Х	Unload POWER OFF
LOADING START	0	0	0	1	Х	(Tape loading start point)
LOADING END	1	0 ->1	1	1	Х	(Tape loading end point)
REV	1	1	0	Х	Х	Reverse Picture Ssarch, Reverse SLOW
PLAY	0	1	0	Х	Х	Play, Rec,F-PS,Still,SLOW,F-ADV
STOP1	0	0	1	1	Х	Stop (Play position 5 Min. over)
STOP 2	0	0	1	Х	Х	(MAIN Break ON MODE)
FF / REW 1	1	0	0	Х	Х	High speed Rew, Low speed FF
FF / REW 2	0 1 1 X X					High speed FF, Low speed Rew

X : DON'T CARE

Page 43

5-6-1 TS M/DECK OPTION TABLE (PAL)

																					REMARK
NO	LOCA-NO	CODE- NO	SPECIFICAT	DESCRIP TION	M-440	M-441	M-420	M-421	M-422	M-420	M-421	M-422	M-420	M-421	M-422	M-420	M-421	M-420	M-421	M-422
					WKD/	WKD/	FK/	FK/	FK/	XK/	XK/	XK/	IK/	IK/	IK/	YK/	YK/	YK/	YK/ VEC S	YK/
					0001-3	0.004	5LI-5	5LI-5	5LI-5	3LG-3	3LG-3	3LG-3	0,001	ΔΔ0Λ.	0K-5	SIEL-S	SIEL-S	ALG-3	ALG-3	ALG-3
1		M/DE	CK ASSY		80004R	00193C	80004T	00193E	00193S	80004U	00193F	00193T	80004V	00193H	00193P	80004Z	00193M	80005L	AA94- 00193N	00193Q
		DEA			AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-	AA91-
2		DEC	K ASSY		40108A	40108A	40112A	40112A	40112A	40112A	40112A	40112A	40113A	40113A	40113A	40114A	40114A	40112A	40112A	40112A
3		DUR	M ASSY
4		PCE	ASSY		AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-	AA95-
	\| \|				000418	00091101	00091E	000910	000910	00091F	00091R	00091R	00091G	000915	00091S	00091K	00091V	00091K	00091V	00091V
5		AA41-10983E	3 300 X245	PCB	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	STANDARD
6	CM330	2401-001513	3 47/16V	C-AL	Х	Х	Х	Х	Х	Х	Х	χ	Х	Х	Х	Х	Х	Х	Х	Х
7	CM336	2202-000127	7 103P	С	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	PAL
8	CM388	2202-000127	7 103P	С	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	MULTI
9	DM712	0401-000005	5 1N4148	D	0	0	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	4HD
10	DM713	0401-000005	5 1N4148	D	Х	Х	0	0	0	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	SECAM
11	DM714	0/01.00000	11/1/1/2	D	0	0	0	0	0	0	0	0	v	v	Y	Y	Y	Y	Y	Y	MESECAM
	DIVI/14	0401-000000	1114140			0		0	0	0	0	0	^	^	^	^	^	^	^	^
12	DM715	0401-000005	5 1N4148	D	Х	Х	Х	Х	Х	Х	Х	Х	0	0	0	Х	Х	Х	Х	Х	2HD LP
13	DM716	0401-000005	5 1N4148	D	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	MULTI
14	DM717	0401-000005	5 1N4148	D	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	NT 3.58
15	ICM301	1204-001410	) LA715901	л IC	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	PAL
		1204-001403	B LA71570	Λ	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	MULTI
16	QM303	0504-000119	P R1004	TR	Х	Х	Х	Х	Х	Х	Х	Х	0	0	0	Х	Х	Х	Х	Х	2HD LP
17	QM316	0501-000398	3 C945	TR	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	D.REC
18	RM320	2001-000554	270	R	Х	Х	Х	Х	Х	Х	Х	Х	0	0	0	Х	Х	Х	Х	Х	2HD LP
19	RM326	2001-000837	51K	R	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	D.REC
20	RM337	2001-000268	3 1.8K	R	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	MULTI
21	RM375	2001-000268	3 1.8K	R	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	PB FM
22	RM376	2001-000268	3 1.8K	R	Х	Х	0	0	0	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	SECAM
23	RM374	2001-000244	1.5M	R	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х
24	RM656	2001-000290	) 10K	R	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	CTL
25	XTM302	2801-003610	3.579545	M X-TAL	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	MULTI
26	ICM604	1203-000515	5 7042	IC-VOL	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	BACK-UP
27	CM646	2401-002259	0.1F,5.5	/ C-AL	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	BACK-UP
28	RM695	2001-000568	3 27	R	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	BACK-UP
29	SECAM	-		-	Х	χ	0	0	0	Х	χ	Х	Х	Х	Х	Х	Х	χ	χ	χ	SECAM
30	CM384	2202-000830	) 82P	C	Х	χ	Х	Х	χ	χ	χ	Х	Х	Х	Х	Х	χ	χ	χ	Х	TV-V-IN
31	CM394	2202-000806	221P	C	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	A OUT
32	CM386	2202-000000	103P	C	X	χ	χ	X	χ	χ	χ	X	X	X	X	X	X	X	χ	X	GND
	5111300	2002 000 121				~				~											WITHOUT
33	JM225	3812-000219	JUMPEF	JM	0	0	Х	Х	Х	0	0	0	0	0	0	0	0	0	0	0	SECAM
34	RM379	2001-000290	) 10K	R	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х
35	JM177	3812-000219	JUMPER	JM	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	AU-HUM
36	CNM611	3711-000682	2 CONN,13	P WAFER	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х
37	CM396	2202-000127	103P	С	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	MULTI
38	ICM103	1203-000190	) 78L05	IC-TR	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	POWER SUPPLY

Page 44

5-6-1 OPTION TABLE (Continued)

																					DOW/ED
39	JM112	3812-000219	JUMPER	JM	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	SUPPLY
40	JM165	3812-000219	JUMPER	JM	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	POWER SUPPLY
41	RM380	2001-001031	91K	R	0	0	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	Х	4HD
42	QM318	0504-000119	R1004	TR	0	0	Х	Х	Х	Х	Х	χ	Х	Х	Х	Х	Х	Х	Х	Х	4HD
43	JM227	3812-000219	JUMPER	JM	0	0	Х	Х	χ	Х	χ	χ	Х	χ	χ	Х	Х	Х	Х	Х	4HD
	i Key option	I N (DELETED WHEN	i a control a	ASSY IS ADD	ED)					I							I		I
44	SWM601	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
45	SWM602	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	χ	0	Х	χ	0	Х	0	Х	Х	KEY
46	SWM603	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
47	SWM604	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
48	SWIM605	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
49	SWM606	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
50	SWM607	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	χ	0	Х	Х	0	Х	0	Х	Х	KEY
51	SWM608	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	χ	0	Х	Х	0	Х	0	Х	Х	KEY
52	SWM609	3404-000244	SW-TACT	SW	0	Х	0	Х	Х	0	Х	χ	0	Х	Х	0	Х	0	Х	Х	KEY
53	CM631	2202-002037	104P	С	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
54	CM632	2401-002009	100/16V	C-AL	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
55	DM607	0401-000005	1N4148	D	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
56	DM608	0401-000005	1N4148	D	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
57	DM609	0401-000005	1N4148	D	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
58	ZDM601	0403-000654	MTZ12B	ZENER	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
59	LM602	AA91-60317A	G-LED,03	ASSY	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
60	CNM611	3711-000683	13P	CON	Х	0	Х	0	0	Х	0	0	Х	0	0	Х	0	Х	0	0	KEY ADD
61	QM603	0504-000118	R1003	TR	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
62	QM604	0504-000118	R1003	TR	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
63	QM605	0504-000118	R1003	TR	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
64	RM631	2001-001077	150,1/2W	R	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
65	RM632	2001-001077	150,1/2W	R	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
66	RM633	2001-001077	150,1/2W	R	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
67	RM637	2001-000290	10K	R	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
68	JM114	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
69	JM127	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
70	JM136	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
71	JM138	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	χ	0	Х	Х	0	Х	0	Х	Х	KEY
72	JM147	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	χ	0	Х	Х	0	Х	0	Х	Х	KEY
73	JM212	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	χ	0	Х	Х	0	Х	0	Х	Х	KEY
74	JM213	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	χ	0	Х	Х	0	Х	0	Х	Х	KEY
75	JM214	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	Х	0	Х	Х	0	Х	0	Х	Х	KEY
76	JM215	3812-000219	JUMPER	JM	0	Х	0	Х	Х	0	Х	χ	0	Х	Х	0	Х	0	Х	Х	KEY
77	REM601	AA59-60003V	REMO- MOD		0	Х	0	Х	χ	0	Х	Χ	0	Х	Х	0	Х	0	Х	Х	KEY

Page 45

5-6-2 SECAM BLOCK LIST OPTION TABLE

N O	LOCA - NO	CODE - NO	DESCRIPTION	SPECIFICATION	REMARK
1	CM901	2202-000127	C-CERA	103P
2	CM902	2301-000224	C-FILM	223P
3	CM903	2201-000376	C-CERA	220P	RADIAL
4	CM904	2201-000193	C-CERA	10P	RADIAL
5	CM905	2201-000863	C-CERA	680P	RADIAL
6	CM906	2202-000127	C-CERA	103P
7	CM907	2201-000681	C-CERA	82P	RADIAL
8	CM908	2401-000426	C-AL	10uF/16V
9	CM909	2202-000796	C-CERA	102P
10	CN910	2401-001333	C-AL	0.47uF/50V
11	CM911	2202-002036	C-CERA	51P
12	CM912	2202-000127	C-CERA	103P
13	CM913	2202-002037	C-CERA	104P
14	CM914	2201-000234	C-CERA	150P	RADIAL
15	CM915	2301-000383	C-FILM	103P
16	CM916	2401-002291	C-AL	47uF/16V
17	CM917	2202-002037	C-CERA	104P
18	CM918	2301-000383	C-FILM	103P
19	CM919	2301-000383	C-FILM	103P
20	CM920	2401-000665	C-AL	2.2uF/50V
21	CM921	2201-000262	C-CERA	180P	RADIAL
22	CM922	2401-000590	C-AL	1uF/50v
23	CM923*	2201-000681	C-CERA	82P	NOTUSED
24	CM924	2202-002037	C-CERA	104P
	CM925	2202-002037	С	104P
25	DM901	0401-000005	D	1N4148
26	DM902	0401-000005	D	1N4148
27	ICM901	1204-001058	IC	LA7337
28	LM901	2701-000002	COIL	100uH
29	LM902	2701-000162	COIL	27uH
30	LM903	2701-000158	COIL	22uH
31	LM904	2701-000191	COIL	47uH

Page 46

5-6-2 SECAM BLOCK OPTION TABLE (Continued)

NO	LOCA - NO	CODE - NO	DE SCRIPTION	SPECIFICATION	REMARK
32	LM905	2701-000208	COIL	6.8uH
33	LM906*	2701-000158	COIL	22uH	NOT USED
34	QM901	0501-000398	TR	C945
35	QM902	0501-000142	TR	R2001
36	QM903	0504-000119	TR	R1004
37	QM904	0501-000398	TR	C945
38	QM905	0501-000398	TR	C945
39	QM906	0501-000303	TR	A733
40	RM901	2001-000522	R	22K
41	RM902	2001-000472	R	2.7K
42	RM903	2001-000539	R	24K
43	RM904	2001-000947	R	7.5K
44	RM905	2001-000890	R	6.8K
45	RM906	2001-000387	R	51K
46	RM907	2001-000591	R	3.3K
47	RM908	2001-000633	R	30K
48	RM909	2001-000890	R	6.8K
49	RM910	2001-000429	R	1K
50	RM911	2001-000429	R	1K
51	RM912	2001-000674	R	360
52	RM913	2001-000281	R	100
53	RM914	2001-000786	R	47K
54	RM915	2001-000539	R	24K
55	RM916	2001-001015	R	9.1K
56	RM917	2001-000977	R	8.2K
57	RM918	2001-000139	R	120K
58	RM919	2001-000734	R	4.7K
59	RM920	2001-000539	R	24K
60	RM921	2001-000429	R	1K
61	RM922*	2001-000319	R	120K	NOT USED
63	JM173	3812-000219	JUMPER	JUMPER
64	JM174	3812-000219	JUMPER	JUMPER
65	JM176	3812-000219	JUMPER	JUMPER
66	JM179	3812-000219	JUMPER	JUMPER
67	JM194	3812-000219	JUMPER	JUMPER

Page 47

6. Troubleshooting

6-1 No Power (No Picture on)

Page 48

6-2 No Power (No LED On)

Page 49

Page 50

6-4 No Picture (Sound OK)

1 Check the Brightness, Contrast and Color adjustments
2. Check: AV Picture, Video Playback
3. See Video Block Diagram

6-5 No Sound (Picture OK)

1. Check the Volume adjustment level.
2. Check AV Video, Sound Playback
3. See Audio Block Diagram

6-6 RF Weak Signal (Playback, AV Mode OK)

Check Tuner (TU001) B+. Check: 9V (IC807) 33V (DZ803). Check 5V (IC902)
2. Pre AMP (HC001), B+. Check: 9V (IC807)

6-7 Recording Defect

1. CN101 Check : Retouch
2. 2nd Tuner (TU002) B+. Check : 12V (D818), 33V(DZ803) 5V (IC807)
3. 2nd If: Check 9V (IC806), Video out, Audio out
4. Video Defect : IC701 Check
5. Audio Defect : IC701 Check
6. Standby Recording Defect, IC901 #5 Line: Check (D833, IC804, IC807, IC806)
7. VPS (PDC) Recording Defect: Check IC901, #4

Page 51

6-8 No Color

1. Check the Color Adjustment level
2. Check the Sandcastle Pulse Line : IC201 #41
3. Check the R-Y, B-Y Line : IC201 #29~#32
4. Check crystal : X202 (4.43361MHz)

6-9 No Vertical SCAN

1. Check R410, D404
2. Check IC301, #7
3. Check IC201 #46, #47 Line
4. Check DY Connector

6-10 Horizontal Size

1. Check C402 , C403 , L401 , L404

6-11 On-Screen Display Missing

1. Check IC901 #2 (D921, Q901, DZ901)
2. Check IC901 #1 (R949, D919, DZ904)

6-12 No Teletext

1. Check IC201 #38, #23, #24, #25
2. Check the 1st 5V-Line (D817,DZ808,R823)
3. Check TIC01 #1 (Vcc : 5V)
4. Check TIC01 #8 (CVBS)
5. Check IC201 #26 (TTX F/B)

Page 52

6-13 Play Mode Inoperative

Page 53

6-14 Mechanism Does Not Operate In Play Mode

Page 54

6-15 Record Mode Inoperative

Page 55

Page 56

6-17 Rewind Mode Inoperative

Page 57

Page 58

6-19 Cassette Loading Mechanism Does Not Operate

Page 59

Page 60

6-21 Capstan Does Not Rotate

Page 61

Page 62

6-23 Video Missing In Play Mode

Page 63

Page 64

6-25 Color Missing In Play Mode

Page 65

Page 66

6-27 Audio Signal Missing in Play Mode

Page 67

Page 68

7-4 Mechanical Parts (Top Side)

AC61-50658A

GUIDE-CASS. DOOR-, POM M90-44,-,-, NTR,-,

Page 69

7-5 Mechanical Parts (Bottom Side)

Loc. No	Part No	Description and Specificatio n
0000
B238
B456	AC66-205/6A	GEAR-JOINT 1-,POM SW-01,M1.0,Z22,-,PCD2
B458	AC66-20574A	GEAR-JOINT 2-,POM SW-01,M1.0,Z14,-,PCD1
B462	AC60-10517A	SCREW-TAP TITE-,PH,+,-,M2.6,L5,ZPC,-,YE
B484	AC66-20580A	GEAR-LOADING DRIVE-,POM SW-01,M1.0,Z32,
B488	AC66-30543A	LEVER-S LOAD ASSY-,-,-,-,X-9
B500	AC66-30542A	LEVER-T LOAD ASSY-,-,-,-,X-9
B560	AC31-12017A	MOTOR-CAPSTANDMVCMC07C,-,X-9
B570	AC60-10514A	SCREW-CAPSTAN-,PH,+,M2.6,L6,-
G542	AC66-60051A	BELT-PULLEY-,5CM-70,2 * 2,-,71.3,-,X-9
K200	AC61-21012A	HOLDER-CLUTCH ASSY-,-,-,-,X-9
K221	AC66-20581A	GEAR-CENTER ASSY-,POM,M=0.5,-,HIGHT T.,
K222	AC60-30306A	WASHER-SLIT-,-,ID2.1,OD5.0,T0.5,-,POLYS
K225	AC66-30547A	LEVER-UP DOWN ASSY-,POM+SUS,-,-,-,X-9

Page 70

8. Electric Parts List

8-1 TB14C52S/XEC (TB20C5DT2S AND TB14C52S Dissimilar Parts)

Loc. No.	Code No.	Description ; Specification	Remark	Loc. No.	Code No.	Description ; Specification	Remark
		ASSY-PCB,MAIN(OP	Т)			ASSY-CRT
*	AA94-0042	BUYER : SESA 7AASSY-PCB,MAIN(OPT);TB14C52S/XEC,C	15A,SPAIN,SESA	⚠	AA39-2051	CRT-COLOR ; LOCAL (SESA) 8ALEAD CONNECTOR-ASSY;-,YFH806-06,	,-,6(4)P,350mm,1617
C403 C404	2306-0003 2306-0001	26 C-FILM,MPPF;4.7nF,5%,1.6KV,TP,28.5x16 95 C-FILM,MPPF;360nF,5%,400V,TP,26x19x	5x9mm, 11.5,20			ASSY-PCB,CRT
D819 L401	0404-0010 AA27-3000	56 DIODE-SCHOTTKY;RK16,60V,1.5A,DO-20 11K COIL-LINEARITY;-,230uH,DR1215,PI0.5,1	4AC,TP 4.1x26,-	*	AA95-2001	OX ASSY-PCB,CRT;-,C15A,14,EU,230V
L404 L803 R301 R304	AA27-4000 AA27-2000 2004-0005 2003-0006	11MCOIL-HORIZ.WIDTH;-,180/480uH,SB-SS 13UCOIL-DEGAUSSING:-,14,16.4ohm,757,89 20 R-METAL;2.7Kohm,1%,178W,AA,TP,1.8x 25 R-METAL OXIDE(S);330ohm,5%,2W,AF,T	6202.6,PI0.8, 'Omm,D 3.2m 'P,4x12mm	R501M R502M 1 V999	2002-0010 2002-0010 3704-0001	09 R-COMPOSITION;2.7Kohm,10%,1/2W, 09 R-COMPOSITION;2.7Kohm,10%,1/2W, 03 SOCKET-CRT;10P,22.5,14.3,SN,ISMS01	AA,TP,3.7X9.0 AA,TP,3.7X9.0 S/BK
R417 R612 R613	2008-0010 2008-0010 2008-0010	09 R-FUSIBLE;1ohm,5%,1W,AA,1P,4.7x12.7 18 R-FUSIBLE(S);0.47ohm,10%,2W,AF,TP,3. 18 R-FUSIBLE(S):0.47ohm,10%.2W,AF,TP,3.	mm 9x10mm 9x10mm			ASSY-SPEAKER
R615 A T444 TU001	2001-0004 AA26-0000 AA40-1000	29 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8 JAA TRANS-FLYBACK;-,FSA38026S,14INCH, J6MTUNER-F/S;TECC2949PG29A(S),PAL-B/C	X3.2MM 125V G,TR,18		3001-0010 AA39-2001	15 SPEAKER;2.5W,16ohm,88dB,150Hz 5DLEAD-CONNECTOR,ASSY;-,67096-003,	-,3(2)P,300,1007#2
		ASSY-M/DECK				REMOCON
*	AA94-0019	3QASSY-M/DECK;M-422YK,2HD,-,-,C15A		*	AA59-0000	06C REMOCON;-,TM48,SSOM728EU,40,L/0	GRAY,SS,EX,-,-
		ASSY-FRAME				ASSY-ACCESSORY
*	AA90-4000	18K ASSY-FRAME;TS-DECK,14C5 SESA ONL	Y	A/R T/M	AA42-1000 AA26-9000 AA68-0012	)1V ANT-ROD:-,3S,620mm,BRN,UL/CSA )1C TRANS-MATCHING;-,300ohm/75ohm,F 28A MANUAL-USERS ; LOCAL (SESA)	PAL,40-890MHz

8-2 TB14C5DT2S/XET (TB20C5DT2S AND TB14C5DT2S Dissimilar Parts)


Loc. No.	Code No.	Description ; Specification	Remark	Loc. No.	Code No.	Description ; Specification	Remark
			T)			ASSY-CRT
*	AA94-0062	5AASSY-PCB,MAIN(OPT);TB14C5DT2S/XE	,C15A,ITALY,SEI	Δ	AA39-2051	CRT-COLOR ; LOCAL (SESA) 8ALEAD CONNECTOR-ASSY;-,YFH806-00	6,-,6(4)P,350mm,1617
C403	2306-0003	26 C-FILM,MPPF;4.7nF,5%,1.6KV,TP,28.5x16	x9mm, 11 5 20			ASSY-PCB,CRT
L401	AA27-3000	11K COIL-LINEARITY;-,230uH,DR1215,PI0.5,1	4.1x26,- 5202 6 PIO 8	*	AA95-2001	0X ASSY-PCB,CRT;-,C15A,14,EU,230V
L803 R301 R304	AA27-2000 2004-0005 2003-0006	30LCOLL-DEGAUSSING;-,14,16,40hm,751,89 00 R-METAL;2.7Kohm,1%,1/8W,AA,TP,1.8x 52 R-METAL OXIDE(S);3300hm,5%,2W,AF,T	0mm,D 3.2m P,4x12mm	R501M R502M N999	2002-0010 2002-0010 3704-0001	09 R-COMPOSITION;2.7Kohm,10%,1/2W 09 R-COMPOSITION;2.7Kohm,10%,1/2W 03 SOCKET-CRT;10P,22.5,14.3,SN,ISMS0	/,AA,TP,3.7X9.0 /,AA,TP,3.7X9.0 :1S/BK
R417 R612	2008-0010 2008-0010	09 R-FUSIBLE;10hm,5%,1W,AA,TP,4.7x12.7 18 R-FUSIBLE(S);0.470hm,10%,2W,AF,TP,3.1	mm 9x10mm Du10mm			ASSY-SPEAKER
R613 R615 1444	2008-0010 2001-0004 AA26-0000	18 R-FUSIBLE(S);0.470ftn,10%,2W,AF,1P,3. 29 R-CARBON;1KOHM,5%,178W,AA,TP,1.8 14ATRANS-FLYBACK;-,FSA38026S,141NCH,7	X3.2MM 125V		3001-0010 AA39-2001	15 SPEAKER;2.5W,16ohm,88dB,150Hz 5DLEAD-CONNECTOR,ASSY;-,67096-003	3,-,3(2)P,300,1007#2
		ASSY-M/DECK				ASSY-ACCESSORY
*	AA94-0019	3QASSY-M/DECK;M-422YK,2HD,-,-,C15A ASSY-FRAME		A/R T/M	AA42-1000 AA26-9000 AA68-0012	11V ANT-ROD;-,3S,620mm,BRN,UL/CSA 11C TRANS-MATCHING;-,300ohm/75ohm, 17AMANUAL-USERS ; LOCAL (SESA)	,PAL,40-890MHz
*	A A O O A O O		V

Page 71

8-3 TB14C5S2S/XEG (TB20C5DT2S AND TB14C5S2S Dissimilar Parts)

				20011101		Description ; Speemeation	Kenlark
		ASSY-PCB,MAIN(OP	T)			REMOCON
		BUYER : SEG / SESA
*	4404 004 24			*	AA59-0000	)7K REMOCON;-,TM48,DP,AA59-00006K,-,-,	eee
	AA94-00020	DAASS1-PCB,IVIAIN(UPT);TB14C5S2S/XEC	J,C IDA,GERIVIAN I			VECK VUCCESSODA
C258	2202-00012	7 C-CERAMIC,MLC-AXIAL;10nF,+80-20%	,25V,Y5V,TP,-,7.5			ASST-AUCESSURT
C403	2306-00032	6 C-FILM, MPPF; 4.7nF, 5%, 1.6KV, TP, 28.5x1	6x9mm,	A (D
C404	2306-00019	5 C-FILM, MPPF; 360nF, 5%, 400V, TP, 26x19	(11.5,20	A/R	AA42-1000	VIV AN I-ROD;-,3S,620mm,BRN,UL/CSA
CP01	2201-00067	3 C-CERAMIC,DISC;820pF,10%,50V,Y5P,T	P,5x3,5	17IVI	AA26-9000	TUTRANS-IVIATUHING;-,3000000//50000,P/	AL,40-890IVIHZ
CP02	2202-00079	1 C-CERAMIC,MLC-AXIAL;150pF,10%,50	V,Y5P,TP,3.5x19,-		AA08-0012	44 IVIAINUAL-USERS ; LUCAL (SESA)
CP03	2305-00035	5 C-FILM,MPEF;330nF,5%,63V, IP,-,5mm	-
CP04	2301-00022	4 C-FILM, PEF;22nF, 5%, 50V, TP, 7.4x3.9x13i	mm,5m
CP05	2301-00024	7 C-FILIVI, PEF; 330F, 5%, 5UV, 1P, 8. 1X4.5X131	mm,5m
D810	2401-00310	2 C-AL, 1000F,2076, 107,GP, 1P, 5X 11, 5 6 DIODE-SCHOTTKY:PK16.60V.1.5A DO.2	ባለለር ፐቦ
D017	0404-00103	6 DIODE-ZENIER MTZ5 6B 5 6V 5 45-5 73	/500m\//
1 10902	1103-00110	6 IC-FEPROM:24C080 1028x8BIT DIP8P3	00MII
	1204-00128	7 IC-DECODER:SDA5650,DIP.14P,PLAST	IC.6V.3
L401	AA27-3000	IK COIL-LINEARITY;-,230uH,DR1215,PI0.5,	14.1x26,-
L404	AA27-40001	IMCOIL-HORIZ.WIDTH;-,180/480uH,SB-55	S6202.6,PI0.8,
L803	AA27-20003	3UCOIL-DEGAUSSING;-,14,16.4ohm,75T,8	90mm,D
LP01	2701-00011	4 INDUCTOR-AXIAL;10uH,10%,2.5x3.4m	m
LP02	2701-00011	4 INDUCTOR-AXIAL;10uH,10%,2.5x3.4mi	m
LP03	2701-00011	4 INDUCTOR-AXIAL;10uH,10%,2.5x3.4mi	m
R301	2004-00050	0 R-METAL;2./Kohm,1%,1/8W,AA,TP,1.8	x3.2m
R304	2003-00065	2 R-METAL UXIDE(S);3300hm,5%,2W,AF,	1P,4x12mm
R417 D610	2008-00100	9 R-FUSIBLE;10000,5%,100,AA,1P,4.7X12. 9 RUSIBLE(S):0.47obm 10%, 200, AETD 2	/[[][] 0v10mm
D612	2008-00101	8 P.FUSIBLE(5):0.470hm 10% 2W/AFTP3	0v10mm
R615	2000-00101	9 R-CARBON-1KOHM 5% 1/8W AA TP1	RX3 2MM
RP01	2001-00028	1 R-CARBON:1000HM.5%.1/8W.AA.TP.1	.8X3.2MM
RP02	2001-00028	1 R-CARBON;1000HM,5%,1/8W,AA,TP,1	.8X3.2MM
RP03	2201-00027	3 C-CERAMIC, DISC; 18pF, 5%, 50V, CH, TP, 5	x3mm,5
RP04	2001-00044	9 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,	1.8X3.2MM
RP05	2001-00043	5 R-CARBON;1MOHM,5%,1/8W,AA,TP,1	.8X3.2MM
RP06	2001-00089	0 R-CARBON;6.8KOHM,5%,1/8W,AA,TP,	1.8X3.2MM
RP07	2001-00022	5 R-CARBON;1.2MOHM,5%,1/8W,AA,TP	1.8X3.2MM
KP09	2001-00022	5 R-CARBON;1.2MOHM,5%,1/8W,AA,IP
	2001-00089	U K-UAKBUN;0.8KUHIVI,5%,1/8W,AA,1P;	1.872751/11/1 1.2277
	AA20-00004	+A TRAINS-FET DAGN,-,FSA300203,141100H SMTTINED F/S-TECC20/0DC20A/S1 DAT D	, 120 V (C TP 18

ASSY-M/DECK

* AA94-00193QASSY-M/DECK;M-422YK,2HD,-,-,C15A

ASSY-FRAME

* AA90-40008K ASSY-FRAME;TS-DECK,14C5 SESA ONLY AA64-00024X DOOR-HOUSING-,14 20.BK708P EL S/V TTX(X),ABS,HB BLK

ASSY-CRT

CRT-COLOR ; LOCAL (SESA) AA39-20518ALEAD CONNECTOR-ASSY;-,YFH806-06,-,6(4)P,350mm,1617

ASSY-PCB,CRT

* AA95-20010X ASSY-PCB,CRT;-,C15A,14,EU,230V

R501M 2002-001009 R-COMPOSITION:2.7Kohm,10%,1/2W,AA,TP,3.7X9.0 R502M 2002-001009 R-COMPOSITION:2.7Kohm,10%,1/2W,AA,TP,3.7X9.0 V999 3704-000103 SOCKET-CRT;10P,22.5,14.3,SN,ISMS01S/BK

ASSY-SPEAKER

3001-001015 SPEAKER:2.5W,16ohm,88dB,150Hz AA39-20015DLEAD-CONNECTOR,ASSY:-,67096-003,-,3(2)P,300,1007#2

Page 72

8-4 TB14C5T2S/XEC (TB20C5DT2S AND TB14C5T2S Dissimilar Parts)

Loc. No.	Code No.	Description ; Specification	Remark	Loc. No.	Code No.	Description ; Specification	Remark
		ASSY-PCB,MAIN(OI BUYER : SESA	PT)			ASSY-CRT
*	AA94-0078	34AASSY-PCB,MAIN(OPT);TB14C5T2S/XE	C,C15A,SPAIN,SESA	A	AA39-2051	CRT-COLOR ; LOCAL (SESA) 8ALEAD CONNECTOR-ASSY;-,YFH806-06	o,-,6(4)P,350mm,1617
C403 C404 D819	2306-0003 2306-0001 0404-0010	C-FILM,MPPF;4.7nF,5%,1.6KV,TP,28.5x C-FILM,MPPF;360nF,5%,400V,TP,26x19 DIODE-SCHOTTKY;RK16,60V,1.5A,DO-	x16x9mm, 9x11.5,20 204AC,TP			ASSY-PCB,CRT
L401 L404	AA27-3000 AA27-4000	D1K COIL-LINEARITY;-,230uH,DR1215,PIO.5 D1MCOIL-HORIZ.WIDTH;-,180/480uH,SB-5	5,14.1x26,- 5S6202.6,PI0.8,	*	AA95-2001	0X ASSY-PCB,CRT;-,C15A,14,EU,230V
L803 R301 R304 R417	AA27-2000 2004-0005 2003-0006 2008-0010	UCUIL-DEGAUSSING;-, 14, 16, 40 nm, 75, R-METAL;2.7Kohm, 1%, 1/8W, AA, 7P, 1. R-METAL OXIDE(S);330ohm, 5%, 2W, A R-FUSIBLE;10hm, 5%, 1W, AA, TP, 4.7x12	890mm,D 8x3.2m F,TP,4x12mm 2.7mm	R501M R502M 1999	2002-0010 2002-0010 3704-0001	09 R-COMPOSITION:2.7Kohm,10%,1/2W, 09 R-COMPOSITION:2.7Kohm,10%,1/2W, 03 SOCKET-CRT;10P,22.5,14.3,SN,ISMS01	,AA,TP,3.7X9.0 ,AA,TP,3.7X9.0 \|S/BK
R612 R613 R615	2008-0010 2008-0010 2001-0004	R-FUSIBLE(S);0.47ohm,10%,2W,AF,TP, R-FUSIBLE(S);0.47ohm,10%,2W,AF,TP, R-CARBON;1KOHM,5%,1/8W,AA,TP,1	3.9x10mm 3.9x10mm .8X3.2MM			ASSY-SPEAKER
▲ T444 ▲ TU001	AA26-0000 AA40-1000	)4ATRANS-FLYBACK;-,FSA38026S,14INCl )6MTUNER-F/S;TECC2949PG29A(S),PAL-E	H,125V B/G,TR,18		3001-0010 AA39-2001	15 SPEAKER;2.5W,16ohm,88dB,150Hz 5DLEAD-CONNECTOR,ASSY;-,67096-003	,-,3(2)P,300,1007#2
		ASSY-M/DECK				ASSY-ACCESSORY
*	AA94-0019	93QASSY-M/DECK;M-422YK,2HD,-,-,C15A	٩	A/R	AA42-1000	11V ANT-ROD;-,3S,620mm,BRN,UL/CSA
		ASSY-FRAME		T/M	AA26-9000	)1C TRANS-MATCHING;-,300ohm/75ohm,I	PAL,40-890MHz
*	AA90-4000	08K ASSY-FRAME;TS-DECK,14C5 SESA O	NLY

8-5 TB20C52S/XET (TB20C5DT2S AND TB20C52S Dissimilar Parts)

AA64-00024ND00R-HOUSING:-TVCR 14.20.BK708P PAL TTX (0) .ABS.HB

Loc. No.	Code No.	Description ; Specification	Remark
		ASSY-PCB,MAIN(OP BUYER : SEI / SESA	T)
*	AA94-0059	7AASSY-PCB,MAIN(OPT);TB20C52S/XET,C	15A,ITALY,SEI
D819	0404-00105 AA40-1000	56 DIODE-SCHOTTKY;RK16,60V,1.5A,DO-20 6MTUNER-F/S;TECC2949PG29A(S),PAL-B/0	4AC,TP G,TR,18
AS	SY-CAB	INET;20C5,TB20C52S/X	ET
	AA64-0002	4MDOOR-HOUSING;-,TVCR 14,20,BK708P	PAL TTX(X) EL,ABS
		REMOCON
*	AA59-0000	6C REMOCON;-,TM48,SSOM728EU,40,L/G	RAY,SS,EX,-,-
		ASSY-ACCESSORY
	AA68-0012	7AMANUAL-USERS ; LOCAL (SESA)

Page 73

8-6 TB20C5DF2S/XET (TB20C5DT2S AND TB20C5DF2S Dissimilar Parts)

Loc. No.	Code No.	Description ; Specification	Remark	Loc. No.	Code No.	Description ; Specification	Remark
		ASSY-PCB,MAIN(OP BUYER : SEI / SESA	T)			REMOCON
*	AA94-0051	8AASSY-PCB,MAIN(OPT);TB20C5DF2S/XET	,C15A,ITALY,SEI	*	AA59-0000	6AREMOCON;-,TM48,L/GRAY,SS,SSOM72	28EU,45,EX,-,-
∧ IC902	1103-00110	06 IC-EEPROM;24C080,1028x8BIT,DIP,8P,30	OMIL			ASSY-ACCESSORY
AS	SY-CAB	INET;20C5,TB20C5DF2S	/XET		AA68-0012	7AMANUAL-USERS ; LOCAL (SESA)
	AA64-0002	4S DOOR-HOUSING;-,TVCR (14,20),BK708P	el S/V TTX,2T,HIPS

8-7 TB20C5DF2S/XEG (TB20C5DT2S AND TB20C5DF2S Dissimilar Parts)

Loc. No.	Code No.	Description ; Specification	Remark Loc. No
		ASSY-PCB,MAIN(O	PT)
		BUYER : SEG / SESA
*	AA94-0062	7AASSY-PCB,MAIN(OPT);TB20C5DF2S/>	XEG,C15A,GERMANY
C258 CP01 CP02 CP03 CP04 CP05 CP06 DZP01 IC902 LP01 LP01 LP02 LP03 RP01 RP02 RP03 RP04 RP05 RP06 RP07 RP09 RP10	2202-0001: 2201-0006 2202-0007 2305-0003 2301-0002; 2301-0002; 2401-0031( 0403-0002; 1103-0011( 1204-0012; 2701-0001; 2701-0001; 2701-0001; 2701-0002; 2001-0002; 2001-0004; 2001-0004; 2001-0004; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-0008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008; 2001-008;	27 C-CERAMIC,MLC-AXIAL;10nF,+80-20; 73 C-CERAMIC,DISC;820pF,10%,50V,YSF 74 C-CERAMIC,DISC;820pF,10%,50V,YSF 75 C-FILM,MPEF;330nF,5%,60V,TP,5,5% 76 C-ERAMIC,MLC-AXIAL;150pF,10%,50V,YSF 76 C-ERAMIC,MLC-AXIAL;150pF,10%,50V,TP,5 76 C-FILM,MPEF;330nF,5%,50V,TP,7,4x3,9x1 74 C-FILM,PEF;330nF,5%,50V,TP,8,1x4,5x1 75 C-AL;100uF,20%,10V,GP,TP,5x11,5 76 DIODE-ZENER:MTZ5,68,5,6V,5,45-5,7 76 IC-ECCODER;SDA5650,DIP,14P,-PLAS 71 I-DECCODER;SDA5650,DIP,14P,-PLAS 74 INDUCTOR-AXIAL;10uH,10%,2,5x3,4r 74 INDUCTOR-AXIAL;10uH,10%,2,5x3,4r 78 R-CARBON;1000HM,5%,1/8W,AA,T 78 R-CARBON;1000HM,5%,1/8W,AA,T 79 R-CARBON;1000HM,5%,1/8W,AA,T 70 R-CARBON;1000HM,5%,1/8W,AA,T 71 R-CARBON;1000HM,5%,1/8W,AA,T 72 R-CARBON;1.2MOHM,5%,1/8W,AA,T 73 R-CARBON;1.2MOHM,5%,1/8W,AA,T 74 R-CARBON;1.2MOHM,5%,1/8W,AA,T 75 R-CARBON;1.2MOHM,5%,1/8W,AA,T	%,25V,Y5V,TP,7.5 P,TP,5x3,5 50V,Y5P,TP,3.5x19,- n 13mm,5m 73V,500mW, P,300MIL 5TIC,6V,3 mm mm P,1.8X3.2MM P,1.8X3.2MM P,1.8X3.2MM P,1.8X3.2MM P,1.8X3.2MM P,1.8X3.2MM P,1.8X3.2MM P,1.8X3.2MM P,1.8X3.2MM P,1.8X3.2MM
		REMOCON
	AA59-0000	6AREMOCON;-,TM48,L/GRAY,SS,SSOM	1728EU,45,EX,-,-
AS	SSY-CAB	INET;20C5,TB20C5DF2	2S/XEG
	AA64-0002	4S DOOR-HOUSING;-,TVCR (14,20),BK70	08P EL S/V TTX,2T,HIPS
		ASSY-ACCESSORY
	AA68-0012	44 Manual-Users ; Local (Sesa)

Page 74

8-8 TB21B5DF2S/XEC (TB20C5DT2S AND TB21B5DF2S Dissimilar Parts)

Loc. No.	Code No.	Description ; Specification	Remark Loc. No.	Code No.	Description ; Specification	Remark
		ASSY-PCB,MAIN(OP	C ) 0M60	5 0504-0001	18 TR-DIGITAL;KSR1003,NPN,300MW,22K	C/22K,TO-92,TP
		BUYER : SESA	REIVI6	01 AA59-6000	3VIMUDULE-REIVIUCUN; DP, SRV-18, 38KHZ,	,940nm,IVIESH,V,S
			RIVIUS DM62	2001-0010	77 R-CARDON(S), ISOOHIVI, 5 %, I/2 W, AA, I 77 D.CADDON(S), ISOOHIM, 5%, 1/2 W, AA, T	P,2.4A0.4IVIIVI
*	AA94-0051	1AASSY-PCB, MAIN(OPT); TB21B5DF2S/XEC	C15A,SPAIN,SECA RM63	2 2001-0010	77 R-CARBON(S), 1500HNI, 578, 172W, AA, 1 77 R-CARBON(S)·1500HM 5% 1/2W ΔΔ T	P,2.4X0.4WIWI P2 4X6 4M/M
			RM63	7 2001-0010	0 R-CARBON 10KOHM 5% 1/8W AA TP1	8X3 2MM
C403	2306-0002	53 C-FILM, MPPF; 7.2nF, 5%, 1.6KV, TP, 28.5x18	.5x12 SWM	601 3404-0002	44 SWITCH-TACT:15V 20mA 90-170 of 7 5x	7mm SPST
CN602	3711-0026	43 CONNECTOR-HEADER;BOX,4P,1R,2.5mm	,STRAIGHT,SN SWM	507 3404-0002	44 SWITCH-TACT:15V.20mA.90-170gf.7.5x	7mm.SPST
∕! \ IC902	1103-0011	06 IC-EEPROM;24C080,1028x8BIT,DIP,8P,300	OMIL SWM	603 3404-0002	44 SWITCH-TACT:15V.20mA.90-170af.7.5x	7mm.SPST
L404	AA27-4000	1NCOIL-HORIZ.WIDTH;-,90/260uH,SB-5S62	20,PI0.8,- SWM	604 3404-0002	44 SWITCH-TACT;15V,20mA,90-170af,7.5x	7mm,SPST
L803	AA27-2000	3Z COIL-DEGAUSSING;-,21,13.5ohm,25T,L23	380,E SWM	605 3404-0002	44 SWITCH-TACT;15V,20mA,90-170gf,7.5x	7mm,SPST
			SWM	606 3404-0002	44 SWITCH-TACT;15V,20mA,90-170gf,7.5x	7mm,SPST
		ASSY-M/DECK	SWM	607 3404-0002 ⁴	44 SWITCH-TACT;15V,20mA,90-170gf,7.5x	(7mm,SPST
			SWM	608 3404-0002 ⁴	44 SWITCH-TACT;15V,20mA,90-170gf,7.5x	(7mm,SPST
*	AA94-8000	5LASSY-M/DECK·M-420YK/XEG-S 2HD PA	L/NT OB ON SWM	609 3404-0002 ⁴	44 SWITCH-TACT;15V,20mA,90-170gf,7.5x	(7mm,SPST
			ZDM6	01 0403-0006	54 DIODE-ZENER;MTZ12B,12V,11.44-12.03	3V,500mW,
		ASSY-PCB,M/DECK			REMOCON
*	AA95-0009	1K ASSY-PCB,M/DECK;-,-,C15A,2HD,PAL,-,N	NTPB * AA	59-00006A	REMOCON;-,TM48,L/GRAY,SS,SSOM72	28EU,45,EX,-,-
CM631	2202-0020	37 C-CERAMIC,MLC-AXIAL;100nF,80-20%,5	0V,Y5V,TP,2.2x3.
CM632	2401-0020	09 C-AL;100uF,20%,16V,GP,TP,6.3x7,5			ASSY-SPEAKER
DM607	0401-0000	05 DIODE-SWITCHING;1N4148,75V,200MA,	,DO-35,TP
DM608	0401-0000	D5 DIODE-SWITCHING;1N4148,75V,200MA	,DO-35,TP	3001-0010	37 SPEAKER;5W,16OHM,90°æ2DB.250+-5	50HZ
DM609	0401-0000	D5 DIODE-SWITCHING;1N4148,75V,200MA	,DO-35,TP	AA39-2050	5DLEAD CONNECTOR-ASSY;-, YSH025-04	,REC,4P,300.700,100
LDM602	AA91-6031	7AASSY-GUIDE,LED;-,ABS,V0,BLK,RED LED	03,TS-DEC
QM603	0504-0001	18 TR-DIGITAL;KSR1003,NPN,300MW,22K/	22K,TO-92,TP
QM604	0504-0001	18 IR-DIGITAL;KSR1003,NPN,300MW,22K/.	22K,10-92,TP

8-9 TB20C5DT2S/XEC Parts List

Loc. No.	Code No.	Description ; Specification Remark	Loc. No.	Code No.	Description ; Specification	Remark
		ASSY-PCB.MAIN(OPT)	C230	2401-001840	) C-AL;100uF,20%,16V,GP,TP,6.3x11,5
			C231	2401-000480	) C-AL;10uF,20%,50V,GP,TP,5x11,5
		BUTER : SESA	C232	2202-000849	C-CERAMIC, MLC-AXIAL; 18pF, 5%, 50V, CH,	TP,3.5x1.9,-
*	A A 0.4 0051		C233	2202-000243	3 C-CERAMIC,MLC-AXIAL;33pF,5%,50V,SL,	ГР,3.5x19,-
	AA74-0031	5AA551-FCB,MAIN(OF1), 1820C5B125/AEC,C15A,SFAIN,SECA	C234	2301-000445	5 C-FILM,PEF;4.7nF,5%,50V,TP,5.5x7x3mm,5	mm
C101	2401-00003	20 C. AL-220E 20% 25V/CPTP5v11 5	C236	2301-000232	2 C-FILM,PEF;3.3nF,5%,50V,TP,8.1x4.5x13mi	m,5
C107	2201-0000	0 C-AE,2201,2070,237,01,11,3711,3 07 C.CEPAMIC MIC AYIAI 22nE +80,20% 25\/V5\/TD3 5v10	C237	2305-000289	C-FILM,MPEF;220nF,5%,63V,TP,-,5mm
C108	2202-00080	57 C-GERAIVIIC, IVIEC-AXIAE, 2211, +00-2070, 239, 139, 11, 3.3X17	C238	2301-000383	3 C-FILM,PEF;10nF,5%,50V,1P,6x/x3.2mm,5i	mm
C100	2202-0020	22 C-AL,2201,2070,307,01,11,3X11,3 37 C.CERAMIC MI C.AXIAI ·100nE80.20% 50V V5V/TP2 2x3	C239	2401-000603	3 C-AL;10F,20%,50V,GP,1P,5x11,5
C112	2202 0020	06 C_EII M MPEE 150nE5% 63V/TP_5mm	C249	2401-000480	) C-AL;10uF,20%,50V,GP,1P,5x11,5	0
C113	2202-00012	27 C-CERAMIC MI C-AXIAI :10nF+80-20% 25V Y5V TP - 7 5	0250	2306-000122	2 C-FILIVI, MPPF; 100nF, 5%, 50V, 1P, 7.3X4.0X5.	Umm,
C201	2401-00262	19 C-AI :47µE 20% 25V GPTP5x11 5	0251	2306-000122	2 C-FILMI,MPPF;1000F,5%,50V,1P,7.3X4.0X5.
C202	2305-00041	12 C-FILM MPEF 470nF 5% 63V TP - 5mm	C253	2202-000210	J C-CERAIVIIC,IVILC-AXIAL;270pF,10%,50V,Y	5P, IP, I.9X3.5, /
C204	2301-00022	24 C-FILM.PEF:22nE.5%.50V.TP.7.4x3.9x13mm.5m	0254	2202-000121	C-CERAIVIIC, WILC-AXIAL; TUTF, +80-20%, 20	)V, Y
C205	2401-00066	50 C-AL:2.2uE.20% 50V.GP.TP.5x11.5	0200	2401-00201		/EDTD 2 Ev10
C206	2306-00012	22 C-FILM.MPPF:100nF.5%.50V.TP.7.3x4.0x5.0mm.	0257	2202-00079		0F, FF, 5.0X F9,-
C207	2401-00184	40 C-AL:100uF.20%.16V.GP.TP.6.3x11.5	C209	2202-000243	C-CERAIVIIC, IVILC-AXIAL, 350F, 57, 50V, 5L,	1P,3.3X19,-
C208	2305-0004	11 C-FILM,MPEF;470nF,5%,50V,TP,7.3x4.8x5.5mm,	C201	2301-000192		/5DTD1 0v2 5 7
C209	2305-00028	39 C-FILM,MPEF;220nF,5%,63V,TP,-,5mm	C262	2202-000210	C-CERAMIC MIC-AXIAL:27001,1078,300,1	0 TD1 0v3 5
C210	2305-00041	11 C-FILM,MPEF;470nF,5%,50V,TP,7.3x4.8x5.5mm,	C205	2401-00214	C-ΔΙ·47μΕ20% 16V GPTP5v11 5	J, IT, T. 7AJ.J,-
C211	2301-00023	32 C-FILM,PEF;3.3nF,5%,50V,TP,8.1x4.5x13mm,5	C200	2207-00214-	C_CERAMIC MIC_ΔΧΙΔΙ · 4 7nF 20% 16V/V	5R TP1 9x3 5 7
C212	2306-00012	22 C-FILM,MPPF;100nF,5%,50V,TP,7.3x4.0x5.0mm,	C302	2401-003140	C-AL-47uE 20% 50V WT/NPTP 10x20 5	51(,11,1.7,6.0,7
C213	2306-00012	22 C-FILM,MPPF;100nF,5%,50V,TP,7.3x4.0x5.0mm,	C303	2305-000149	C-FILM.MPFF:100nE.5%.100V.TP.12x12.5x	6.5.5
C214	2306-00012	22 C-FILM,MPPF;100nF,5%,50V,TP,7.3x4.0x5.0mm,	C304	2305-000285	C-FILM.MPFF:220NF.5%.100V.TP.10.5X5.5	X15MM.5
C215	2401-00048	30 C-AL;10uF,20%,50V,GP,TP,5x11,5	C305	2202-000253	C-CERAMIC.MLC-AXIAL:4.7nF,20%,16V.Y	5R.TP.1.9x3.5.7
C219	2201-0002	73 C-CERAMIC,DISC;18pF,5%,50V,CH,TP,5x3mm,5	C306	2401-002288	3 C-AL:470uF.20%.25V.WT.TP.10x20.5
C221	2306-00012	22 C-FILM,MPPF;100nF,5%,50V,TP,7.3x4.0x5.0mm,	C307	2305-000285	C-FILM.MPEF:220NF.5%,100V.TP.10.5X5.5	X15MM.5
C222	2401-00184	40 C-AL;100uF,20%,16V,GP,TP,6.3x11,5	C308	2305-000407	C-FILM,MPEF;470nF,5%,100V,TP,-,5mm
C225	2401-00060	03 C-AL;1uF,20%,50V,GP,TP,5x11,5	C401	2301-000383	3 C-FILM, PEF; 10nF, 5%, 50V, TP, 6x7x3.2mm, 5i	mm
C226	2401-00060	03 C-AL;1uF,20%,50V,GP,TP,5x11,5	C402	2201-000406	C-CERAMIC, DISC; 270pF, 10%, 2KV, Y5P, TP, 8	3x6,7.5
C227	2202-00079	6 C-CERAMIC,MLC-AXIAL;1NF,10%,50V,Y5P,TP,3.5X1.9MM,-	C403	2306-000267	C-FILM,MPPF;8.2nF,5%,1.6KV,TP,28.5x18.	5x12
C228	2309-00013	38 C-FILM,PE-PPF;100nF,5%,50V,TP,20x16x8.5,7.5m	C404	2306-000204	C-FILM,MPPF;430nF,5%,400V,TP,26x20.5x	.12.5,

Page 75

Loc. No.	Code No. Description ; Specification	Remark	Loc. No.	Code No.	Description ; Specification	Remark
C405	2305-000154 C-FILM.MPFF-100nF5% 400VTP21	5x6.5x11.5	C904	2201-000247	C-CERAMIC DISC:15pE5% 50V CH TP5x3 5
C406	2201-000556 C-CERAMIC,DISC;470pF,10%,500V,V	′5P,TP,7x4,5	C905	2301-000227	C-FILM,PEF;27nF,5%,50V,TP,7x3.5x6.5mm,5mm
C407	2401-002288 C-AL;470uF,20%,25V,WT,TP,10x20,5		C906	2401-000030	C-AL;22uF,20%,25V,GP,TP,5x11,5
C408	2201-000556 C-CERAMIC,DISC;470pF,10%,500V,V	′5P,TP,7x4,5	C907	2201-000423	C-CERAMIC,DISC;27pF,5%,50V,NPO,TP,5x3,2.5
C409	2401-001661 C-AL;68uF;20%,100V,GP,TP,10x16,5		C908	2201-000423	C-CERAMIC,DISC;2/pF,5%,50V,NPO,TP,5x3,2.5	1 0v2 5
C411 C412	2201-000556 C-CERAIVIIC,DISC;470pF,10%,500V,1 2401-000927 C-AL-22uF 20% 250V GPTP13x20 5	54,17,784,5	C909	2202-000121	C-CERAMIC MI C-AXIAL; 100pF, 10%, 50V, 15P, 1P, C-CERAMIC MI C-AXIAL: 100pF 10% 50V Y5P TP	1.9X3.5,- 1.9X3.5 -
C412	2401-003028 C-AL;100uF,20%,25V,WT,TP,6.3x11,5		C911	2202-000121	C-CERAMIC,MLC-AXIAL;100pF,10%,50V,Y5P,TP,	1.9x3.5,-
C414	2201-000984 C-CERAMIC,DISC;680pF,10%,2KV,Y	5P,TP,11x6,7.5m	C915	2306-000122	C-FILM, MPPF;100nF,5%,50V,TP,7.3x4.0x5.0mm,
C415	2305-000382 C-FILM,MPEF;4.7nF,5%,400V,TP,-,5m	im	C916	2401-002594	C-AL;220uF,20%,16V,GP,TP,8x11.5,5
C601	2401-001998 C-AL;1000uF,20%,25V,GP,TP,10x20,5	mm 1 OvE Omm	C920	2301-000192	C-FILM,PEF;1nF,5%,50V,TP,5.3x10mm,5mm
C602	2306-000122 C-FILIVI,IVIPPF;1001F,5%,50V,1P,7.384 2401-000480 C-ΔI-10μF20% 50V CPTP5v11 5	ŧ.0X3.0IIIII,	CB03 CK01	2202-000127	C-CERAMIC MI C-AXIAL; 1011F,+80-20%,25V,15V C-CERAMIC MI C-AXIAL:10nF+80-20%,25V/25V	, IP,-, 7.5 / TP - 7.5
C605	2301-000445 C-FILM,PEF;4.7nF,5%,50V,TP,5.5x7x3	mm,5mm	CK02	2202-000127	C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V	,TP,-,7.5
C606	2401-002619 C-AL;47uF,20%,25V,GP,TP,5x11,5		CL01	2202-000127	C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V	,TP,-,7.5
C607	2401-000914 C-AL;22uF,20%,16V,GP,TP,5x11,5		CN101	3711-002641	CONNECTOR-HEADER;BOX,10P,1R,2.54mm,STR	AIGHT, Sn
C608	2401-001998 C-AL;1000uF,20%,25V,GP,TP,10x20,5	mm	CN102	3/11-003641	CONNECTOR-HEADER;BOX,12P,1R,2.5mm,STRA	AIGHT,SN
C701	2401-001397 C-AL;4700F,20%,25V,GP,1P,10X16,5 2401-000471 C-Δ1-10μF20% 50V BPTP5x11 5mm		CN501C	3711-002647	CONNECTOR-HEADER'BOX,8P, 1R,2.5mm,STRAI	GHT,SN GHT SN
C702	2401-001989 C-AL;4.7uF,20%,50V,BP,TP,5x11,5		CN701	3711-002646	CONNECTOR-HEADER; BOX, 7P, 1R, 2.5mm, STRAI	GHT,SN
C703	2202-000121 C-CERAMIC,MLC-AXIAL;100pF,10%	50V, Y5P, TP, 1.9x3.5,-	CN702	3711-002644	CONNECTOR-HEADER;BOX,5P,1R,2.5mm,STRAI	GHT, SN
C704	2202-000121 C-CERAMIC,MLC-AXIAL;100pF,10%	50V,Y5P,TP,1.9x3.5,-	CN901	3711-002644	CONNECTOR-HEADER;BOX,5P,1R,2.5mm,STRAI	GHT,SN
C705	2401-001363 C-AL;470uF,20%,16V,GP,TP,10x12.5,5	ō	D102	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP TD
C710	2401-000480 C-AL;T00F,20%,50V,GP,TP,5XT1,5 2401-000471 C-AL:10uF20% 50V RPTP5v11 5mm		D205	0401-000005	DIODE-SWITCHING; IN4148, /5V,200MA,DO-35 DIODE-SWITCHING:1N4148, 75V,200MA, DO-35	, 1 P TP
C710	2401-000471 C-AL:10uF,20%,50V,BI,TT,5XT1,5		D209	0401-000005	DIODE-SWITCHING:1N4148,75V,200MA,DO-35	TP
C715	2401-002619 C-AL;47uF,20%,25V,GP,TP,5x11,5		D401	0402-000132	DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP
C717	2401-000471 C-AL;10uF,20%,50V,BP,TP,5x11,5mm		D402	0402-000132	DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP
C724	2401-001989 C-AL;4.7uF,20%,50V,BP,TP,5x11,5		D403	0402-000540	DIODE-RECTIFIER;RU20A,600V,1.5A,-,TP
C725	2401-000480 C-AL;T0uF;20%;50V;GP;TP;5xT1;5		D404	0402-000546	DIODE-RECTIFIER; I VR10G, 400V, 1.0A, DO-41, IP
C720	2401-002019 C-AL,470F,20%,25V,GP,1P,5X11,5 2202-000231 C-CERAMIC MI C-AXIAL:330pF10%	50V Y5P TP 3 5x19 -	D403	0402-000540	DIODE-RECTIFIER 1 VR10G,400V,1.0A,DO-41,1P
C728	2202-000231 C-CERAMIC,MLC-AXIAL;330pF,10%	50V,Y5P,TP,3.5x19,-	D601	0402-000132	DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP
C729	2401-000480 C-AL;10uF,20%,50V,GP,TP,5x11,5		D602	0402-000132	DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP
C730	2401-000493 C-AL;10uF,20%,50V,LZ,TP,5x11mm,5	mm	D603	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP
C800A	2201-000987 C-CERAMIC,DISC;2.2nF,20%,400V,Y	5U,TP,15x8,10	D604	0402-000132	DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP	D
C800B	2201-000903 C-CERAIVIIC, DISC; THF, 20%, 400V, 150 2306-000318 C-EILM MPPE-220nE 20% 250V/TP- 2	J, IP, I IX8IIIII, IUII 12 5mm	D801 D802	0402-000213	DIODE-RECTIFIER/ERB12-06,000V, 1.0A, DO-41, T	P P
C802	2306-000318 C-FILM,MPPF;220nF,20%,250V,TP,-,2	2.5mm	D803	0402-000213	DIODE-RECTIFIER;ERB12-06,600V,1.0A,DO-41,T	P
C804	2401-002619 C-AL;47uF,20%,25V,GP,TP,5x11,5		D804	0402-000213	DIODE-RECTIFIER;ERB12-06,600V,1.0A,DO-41,T	Р
C805	2401-002300 C-AL;47uF,20%,50V,GP,TP,6.3x11,5		D805	0402-001105	DIODE-RECTIFIER;ERB43-04SV1,400V,1.0A,-,TP
C806	2301-000310 C-FILM,PEF;68nF;5%;50V,TP;8.0X8.52	(4.0X5,5	D806	0402-000132	DIODE-RECTIFIER;1N4004,400V,1A,DO-41, IP
C808	2303-000163 C-FILM PPF·2 2nE 5% 800V TP 15x13	x8575	D808	0402-001105	DIODE-RECTIFIER/ERB43-04SV1 400V, 1.0A, -, IP DIODE-RECTIFIER/ERB43-04SV1 400V 1 0A - TP
C810	2301-000224 C-FILM,PEF;22nF,5%,50V,TP,7.4x3.9x	13mm,5m	D811	0402-000132	DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP
C811	2301-000192 C-FILM,PEF;1nF,5%,50V,TP,5.3x10mr	n,5mm	D812	0402-000540	DIODE-RECTIFIER;RU20A,600V,1.5A,-,TP
C812	2201-000374 C-CERAMIC,DISC;220pF,5%,50V,CH,	TP,12.5x3,5	D817	0402-000132	DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP
C813	2201-000991 C-CERAMIC,DISC;560pF,10%,2KV,YS	5P,TP,13x7,7.5	D818	0402-000233	DIODE-RECTIFIER;FML-G12S,200V,5A,-,-
C815	2201-000991 C-CERAIVIIC,DISC;560pF,10%,2KV,13 2201-000991 C-CERAMIC DISC:560pF10% 2KV/V	0P, 1P, 13X7, 7.5	D820 D821	0404-001050
C819	2401-000262 C-AL:100uF,20%.160V.HR.TP.16x25.7	7.5	D829	0402-000340	DIODE-SWITCHING:1N4148.75V.200MA.DO-35	.TP
C820	2401-000262 C-AL;100uF,20%,160V,HR,TP,16x25,7	.5	D831	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP
C821	2401-002594 C-AL;220uF,20%,16V,GP,TP,8x11.5,5		D832	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP
C822	2401-002300 C-AL;47uF,20%,50V,GP,TP,6.3x11,5		D833	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,1P TD
C823	2401-001303 C-AL;4700F,20%,16V,GP,FP,10X12.5,5 2401-001363 C-AL:4700F20% 16V/GPTP10v12.5		D834 D901	0401-000005	DIODE-SWITCHING; IN4148,75V,200IVIA,DU-35 DIODE-SWITCHING:1N4148,75V,200MA DO-35	, i P TP
C825	2401-000722 C-AL;2200uF,20%,25V,WT,TP,16x25.	, 7.5	D906	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	, TP
C826	2401-000302 C-AL;100uF,20%,25V,GP,TP,6.3x11,5		D908	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP
C827	2306-000122 C-FILM,MPPF;100nF,5%,50V,TP,7.3x4	1.0x5.0mm,	D909	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP
C828	2401-001363 C-AL;470uF,20%,16V,GP,TP,10x12.5,	)	D910	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	, I P
C829 C830	2401-002594 C-AL;220UF,20%,16V,GP,1P,8X11.5,5 2401-002594 C-Δ1-220μF20% 16V/CDTD9v11 5 5		D912	0401-000005	DIODE-SWITCHING; 1N4148, /5V,200MA,DO-35 DIODE-SWITCHING-1N/148, 75V,200MA, DO-25	, i P TP
C831	2401-001363 C-AL:470uF.20%.16V.GP.TP.10x12.5.5	5	D914	0401-000005	DIODE-SWITCHING; 1N4148, 75V, 200 MA, DO-35	.TP
C832	2306-000122 C-FILM,MPPF;100nF,5%,50V,TP,7.3x4	1.0x5.0mm,	D916	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP
C834	2306-000122 C-FILM, MPPF; 100nF, 5%, 50V, TP, 7.3x	1.0x5.0mm,	D919	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP
C835	2401-002075 C-AL;4.7uF,20%,50V,GP,TP,5x11,5		D921	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	,TP
C836	2401-002594 C-AL;2200L;20%,16V,GP,TP,8x11.5,5	1 0v5 0mm	DK01	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,DO-35	, ו ץ דס
C838	2300-000122 0-FILIVI,IVIPPF;1000F,5%,50V,1P,7.38 2401-003141 C-AL:2200uF20% 25V W/TTP13v25	+.0x3.0000, 5mm	DK02 D7201	0401-000005	DIODE-3WITUTIING; IN4148, / 5V,2001VIA,DU-35 DIODE-7ENER:MT73 9B 3 9V 3 89-4 16V/500mM	, i r /.
C839	2401-000133 C-AL;1000uF,20%,16V,GP,TP.10x20.5		DZ222	0403-000560	DIODE-ZENER;MTZ6.8B,6.8V,6.49-6.83V.500mW	., I,
C840	2306-000122 C-FILM,MPPF;100nF,5%,50V,TP,7.3x	1.0x5.0mm,	DZ301	0403-000660	DIODE-ZENER;MTZ22A,22V,20.15-21.2V,500mV	V,D
C844	2401-002594 C-AL;220uF,20%,16V,GP,TP,8x11.5,5		DZ302	0403-000700	DIODE-ZENER;TZP33A,33V,31-35V,1W,DO-41,TF
C850	2401-001840 C-AL;100uF,20%,16V,GP,TP,6.3x11,5		DZ303	0403-001039	DIODE ZENER: MA2560,56V,52-60V,1W,DO-41,T	P
C003	2401-001397 C-AL;4700F,20%,25V,GP,TP,10X16,5 2202-000796 C-CERAMIC MLC-AXIAL-1NF 10% 5/	)// Y5PTP3 5X1 QM/M -	DZ304	0403-000656	DIODE-ZEIVER, IVITZ 150, 157, 14.35-15.097,500m DIODE-ZENER-MTZ15C 15V/14 25, 15 00V 500m	vv, W
C902	2201-000247 C-CERAMIC, DISC:15pF.5%.50V.CH.T	P,5x3,5	DZ702	0403-000563	DIODE-ZENER;MTZ9.1B,9.1V,8.57-9.01V.500mV	, I,
C903	2401-000027 C-AL;4.7uF,20%,50V,GP,TP,5x11,5		DZ704	0403-000563	DIODE-ZENER;MTZ9.1B,9.1V,8.57-9.01V,500mW	I,

Page 76

Loc. No.	Code No.	Description ; Specification	Remark	Loc. No.	Code No.	Description ; Specification	Remark
DZ705	0403-000563	DIODE-ZENER;MTZ9.1B,9.1V,8.57-9.01V,500m	W,	Q206	0501-000389	TR-SMALL SIGNAL:KSC815,NPN,400mW,T0-9	2,TP,120-
DZ/06 DZ707	0403-000563	DIODE-ZENER;M1Z9.1B,9.1V,8.57-9.01V,500m DIODE-ZENER:MTZ9.1B.9.1V.8.57-9.01V,500m	W, W	0207 1 0401	0501-000389	TR-SMALL SIGNAL;KSC815,NPN,400mW,10-9 TR-POWER:KSC5386 NPN 50W TO-3PE ST 8-	92, IP, 120-
DZ801	1405-000152	VARISTOR;560V,2500A,14x8.5mm,TP	•••,	Q402	0501-000369	TR-SMALL SIGNAL;KSC2331-Y,NPN,1W,TO-92	2L,-,120-
DZ802	0403-000300	DIODE-ZENER;MTZ8.2B,8.2V,7.78-8.19V,500m	W,	Q601	0504-000123	TR-DIGITAL;KSR1010,NPN,300mW,10K,TO-92,	TP
DZ803 DZ804	0403-000700	DIODE-ZENER; I ZP33A, 33V, 31-35V, 1W, DU-41, DIODE-ZENER: MT75 6B 5 6V 5 45-5 73V 500m	IP W	0701	0501-000283	IR-SMALL SIGNAL;KSA539,PNP,400mW,10-92 IC-PWM CONTROLLER:3S0680RET03PE.5L5 3	2, TP, T20- 210 PLASTI
DZ804 DZ805	0403-000290	DIODE-ZENER: TZP8.2B.8.2V.8.2-9.3V.1W.DO-4	vv, 1	0802	0501-000369	TR-SMALL SIGNAL:KSC2331-Y.NPN.1W.TO-92	210,FLA311 2L,120-
DZ806	1405-000152	VARISTOR;560V,2500A,14x8.5mm,TP		A 0803	0501-000283	TR-SMALL SIGNAL;KSA539,PNP,400mW,TO-92	2,TP,120-
DZ807	0403-000355	DIODE-ZENER;UZ5.1BSB,5.1V,4.97-5.18V,500n	1W	Q901	0501-000389	TR-SMALL SIGNAL;KSC815,NPN,400mW,TO-9	2,TP,120-
DZ808 DZ901	0403-000290	DIODE-ZENER, W125.08, 5.07, 5.43-5.737, 50011	vv, iW	Q903 Q904	0501-000389	TR-SMALL SIGNAL KSC815, NPN, 400mW, TO-9	2,TP,120- 2,TP,120-
DZ902	0403-000297	DIODE-ZENER;MTZ6.2B,6.2V,5.96-6.27V,500m	W,	R101	2001-000613	R-CARBON; 3.9KOHM, 5%, 1/8W, AA, TP, 1.8X3.2	MM
DZ903	0403-000560	DIODE-ZENER;MTZ6.8B,6.8V,6.49-6.83V,500m	W,	R102	2001-000660	R-CARBON;33KOHM,5%,1/8W,AA,TP,1.8X3.2M	MM
DZ904 DZ905	0403-000300	DIODE-ZEINER;WI128.2B,8.2V,7.78-8.19V,500m DIODE-ZENER:MTZ5.6B,5.6V,5.45-5.73V,500m	vv, W	R107 R119	2001-000281	R-CARBON;1000HIVI,5%,1/8WV,AA,1P,1.8X3.2N R-CARBON:12KOHM 5% 1/8W AA TP1 8X3.2N	MM
∕ F801	3601-000261	FUSE-FERRULE;250V,3.15A,TL,GLASS,5.2x20m	im	R202	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2M	MM
F802	3601-001086	FUSE-FERRULE;125V,5A,FA,GLASS,2.4x7.5mm		R203	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2N	MM
Z!\_ F803 F81	3601-001086	FUSE-FERRULE;125V,5A,FA,GLASS,2.4x7.5mm		R204 R205	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON:3900HM/5%,1/8W/AA,TP1.8X3.2M
F82	3602-000114	FUSE-HOLDER;-,-,30mohm		R205	2001-000008	R-CARBON;15KOHM,5%,1/8W,AA,TP,1.8X3.21	MM
GT02A	AA39-20010	BLEAD-CONNECTOR, ASSY;-, YFH800-01, S, 1P, 50	0,1617#22	R207	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2M	MM
//_ HC001	AA13-20004	WIC-HYBRID;-,PAP103T,SIP,6P,PRE-AMP,TP	C 0 0V	R208	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2N	MM ANA
1C201	1204-001439	IC-IF CIRCUIT;TDA8356,SIP,9P,-,PLASTIC,40V,-	6,0.UV	R209 R212	2001-000281	R-CARBON;1000HWI,5%,178W,AA,TP,1.8X3.2	2MM
A IC601	1201-001386	IC-POWER AMP;7267,DIP,16P,-,DUAL,32dB,PL	AST	R213	2001-000016	R-CARBON(S);10HM,5%,1/2W,AA,TP,2.4X6.4M	MM
/ IC701	0801-000961	IC-CMOS LOGIC;4053,MUTIPLEXER,DIP,16P,30	OMIL	R215	2001-000008	R-CARBON;15KOHM,5%,1/8W,AA,TP,1.8X3.2M	MM
	0604-001038	PHOTO-COUPLER-TR 130-260% 200mW DIP-4	ST	R216 R218	2001-000947 2004-001914	R-CARBON; 7.5KOHIVI,5%, 1/8VV,AA, 1P, 1.8X3.2 R-MFTAL:39Kohm 2% 1/8W AA TP1 8x3 5mm	IVIIVI
IC802	1203-001217	IC-POSI.ADJUST REG.:431,TO-92,3P,4.58MIL,F	LASTIC,2	R210	2001-000016	R-CARBON(S);10HM,5%,1/2W,AA,TP,2.4X6.4M	MM
	1203-000284	IC-POSI.FIXED REG.;7806,TO-220,3P,-,PLASTIC	,5.75/	R220	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2M	IM
∕!\ IC806 ☆ IC807	1203-001225	IC-POSI.FIXED REG.; /8R09, 10-220, 4P,-, PLASTI IC-POSI FIXED REG. 78R09 TO-220, 4P,- PLASTI IC-POSI FIXED REG. 78R09 TO-220, 4P,- PLASTI	C,8.78 C 8.78	R221 R222	2001-000429	R-CARBON;1KUHM,5%,1/8W,AA,1P,1.8X3.2M R-CARBON:1KOHM,5%,1/8W,AA,TP1,8X3.2M	IM IM
1C901	AA13-0001223	AIC-MCU;-,CXP85340A-329S ,8BIT,ST,TF-502V,6	4P,750MIL	R223	2001-000429	R-CARBON;1KOHM;5%;1/8W;AA;1F;1.8X3.2M	IM
1C902	1103-000156	IC-EEPROM;24C04,512x8BIT,DIP,8P,300MIL,1		R225	2001-000273	R-CARBON;100KOHM,5%,1/8W,AA,TP,1.8X3.2	2MM
	1202-000001	IC-VOLTAGE COMP.;7533,TO-92,3P,-,SINGLE,-,:	,PLA	R226	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2M	IM INA
J196	2701-000002	INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm		R228	2001-000427	R-CARBON;2KOHM,5%,1/8W,AA,TP,1.8X3.2M	IM
JS701	3722-000183	JACK-SCART;21P,4mm,SN,BLK,NO		R230	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2M	MM
L101	2701-000326	INDUCTOR-AXIAL;560nH,10%,2.3x3.4mm		R234	2001-000832	R-CARBON;5100HM,5%,1/8W,AA,TP,1.8X3.2N	MM
L103	2701-000114	INDUCTOR-AXIAL;10uH,10%,2.5x3.4mm		R243	2001-000303	R-CARBON;27K0HW,5%,178W,AA,TP,1.8X3.2M	IM
L105	2701-000114	INDUCTOR-AXIAL;10uH,10%,2.5x3.4mm		R244	2001-000780	R-CARBON;4700HM,5%,1/8W,AA,TP,1.8X3.2M	MM
L106	2701-000114	INDUCTOR-AXIAL;10uH,10%,2.5x3.4mm		R247	2001-000490	R-CARBON;2000HM,5%,1/8W,AA,TP,1.8X3.2N	MM
L108 L201	2701-000180	INDUCTOR-AXIAL;330H,5%,2.5X3.41111 INDUCTOR-AXIAL;4.7uH.10%,2.5x3.4mm		R248 R249	2001-000938	R-CARBON:680HIVI,5%,178W,AA,TP,1.8X3.2IVI R-CARBON:5100HM.5%,178W,AA,TP,1.8X3.2IVI	MM
L202	2701-000146	INDUCTOR-AXIAL;2.2uH,10%,2.5x3.4mm		R250	2001-000857	R-CARBON;5600HM,5%,1/8W,AA,TP,1.8X3.2M	MM
L205	2701-000114	INDUCTOR-AXIAL;10uH,10%,2.5x3.4mm		R252	2001-000780	R-CARBON;4700HM,5%,1/8W,AA,TP,1.8X3.2M	ΜМ
L206 L207	2701-000116	INDUCTOR-AXIAL; 100H, 10%, 4.2X9.8mm INDUCTOR-AXIAL:100H 10% 2 5x3 4mm		R253 R254	2001-000449	R-CARBON;2.2KUHIVI,5%,1/8W,AA,TP,1.8X3.2 R-CARBON·1KOHM 5% 1/8W AA TP1 8X3.2M	IVIIVI IM
L301	2701-000116	INDUCTOR-AXIAL;10uH,10%,4.2x9.8mm		R255	2001-000832	R-CARBON;5100HM,5%,1/8W,AA,TP,1.8X3.2M	MM
L302	2701-000116	INDUCTOR-AXIAL;10uH,10%,4.2x9.8mm		R256	2001-000734	R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2	MM
L303 L304	2701-000114	INDUCTOR-AXIAL; 100H, 10%, 2.5X3.4MM INDUCTOR-AXIAL 100H 10% 2.5X3.4MM		R257 R258	2001-000290	R-CARBON; 10K0HM,5%, 1/8W,AA, 1P, 1.8X3.2f R-CARBON:100K0HM 5% 1/8W AA TP1 8X3.2	VIIVI VMM
L305	2701-000116	INDUCTOR-AXIAL;10uH,10%,4.2x9.8mm		R259	2001-000003	R-CARBON;3300HM,5%,1/8W,AA,TP,1.8X3.2M	MM
L401	AA27-30001	B COIL-LINEARITY;-,195uH,QIC1010,PI0.4,4.5x21	.5	R260	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2N	MM
L403	2901-000297	FILTER-EMI ON BOARD;-,3A,-,-,3.5X5,TP,-		R261 R262	2001-000/34	R-CARBON:4. /KUHM,5%,1/8W,AA,TP,1.8X3.2 R-CARBON:1.6KOHM 5%,1/8W,AA,TP1,8X3.2	MM
L701	2701-000114	INDUCTOR-AXIAL;10uH,10%,2.5x3.4mm		R263	2001-000232	R-CARBON;4700HM,5%,1/8W,AA,TP,1.8X3.2N	лм
L703	2701-000114	INDUCTOR-AXIAL;10uH,10%,2.5x3.4mm		R264	2001-000005	R-CARBON;3900HM,5%,1/8W,AA,TP,1.8X3.2M	MM
L/04	2/01-000114			R265 R267	2001-000563	R-CARBON;2/KOHM,5%,1/8W,AA,TP,1.8X3.20 P.CARBON:6800HM 5% 1/8W/AA TP1 8X3.20	MM ANA
L802	3301-001223	CORE-FERRITE BEAD;AB,-,3.5X5X0.8MM,-,TP,	HF30,-	R268	2001-000290	R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.21	MM
L803	AA27-20003	Y COIL-DEGAUSSING;-,20,15.20hm,28T,L2170,E		R301	2004-000699	R-METAL:3.3Kohm,1%,1/8W,AA,TP,1.8x3.2m
L805	3301-001223	CORE-FERRITE BEAD;AB,-,3.5X5X0.8MM,-,TP,	HF30,- 2400C	R302	2004-004087	R-METAL(S);1.5ohm,1%,1/2W,AA,TP,2.5x6.5m	m
L810	2701-000287	INDUCTOR-AXIAL;100uH,10%.5x14mm	27000	R303	2003-000205	R-METAL OXIDE(S);2200hm,5%.1W.AF, IP,2.3X0.5III	6.5mm
L812	3301-000287	CORE-FERRITE BEAD;AA,3.5x1.0x6.0mm,1500	,2400G	R305	2001-000085	R-CARBON(S):100KOHM,5%,1/2W,AA,TP,2.4X	6.4MM
L813	3301-000287	CORE-FERRITE BEAD;AA,3.5x1.0x6.0mm,1500	2400G	R306	2008-000254	R-FUSIBLE(S);0.68ohm,5%,2W,AF,TP,3.9x10mm	n 45.4
L817 1902	2901-000297 AA27-100030	- гістек-еіліі ол воако;-,3А,-,-,3.5х5,ТР,- GCOII -CHOKF:-,30цН.К.50-22-3mA ТРЕГО606R4	N N	к401 R402	2001-000281	R-CARBON:3.3KOHM.5%,1/8W,AA,1P,1.8X3.20 R-CARBON:3.3KOHM.5% 1/8W AA TP1 8X3 2	MM
L904	2701-000116	INDUCTOR-AXIAL;10uH,10%,4.2x9.8mm		R403	2001-001114	R-CARBON(S):2700HM,5%,1/2W,AA,TP,2.4X6	.4MM
Q201	0501-000389	TR-SMALL SIGNAL;KSC815,NPN,400mW,TO-	2,TP,120-	R404	2003-001047	R-METAL OXIDE(S);680hm,5%,2W,AF,TP,3.9x10	0mm
0202	0501-000389	TR-SIVIALL SIGNAL;KSC815,NPN,400mW,10-9 TR-SMALL SIGNAL:KSC815 NPN 400mW/TO 0	2,17,120- 2 TP 120-	K4U5 R408	2003-000540	K-IVIE IAL UXIDE(S); IK0hm,5%,2W,AF,1P,4x12r R-FLISIBLE(S):10hm 5% 1\N/ AF TP 3 9x10mm	TITI)
Q203	0501-000389	TR-SMALL SIGNAL;KSC815,NPN,400mW,TO-	2,TP,120-	R409	2008-000204	R-FUSIBLE(S);0.220hm,10%,1/2W,AF,TP,2.5x6.	5
Q205	0501-000389	TR-SMALL SIGNAL;KSC815,NPN,400mW,TO-9	2,TP,120-	R410	2008-000264	R-FUSIBLE(S);10hm,5%,1W,AF,TP,3.9x10mm

Page 77

Loc. No.	Code No.	Description ; Specification	Remark	Loc. No.	Code No.	Description	; Specification	Remark

R412	2004-001390	) R-METAL(S);1Kohm,2%,1/2W,AA,TP,2.4x6.4mm		R902	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
R413	2001-001037	7 R-CARBON(S);0.390HM,5%,1/2W,AA,TP,2.4X6.	4MM	R903	2001-00042	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
R414	2001-000022	2 R-CARBON(S);330HM,5%,1/2W,AA,TP,2.4X6.4	MM	R904	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM	I
R415	2003-000993	3 R-METAL OXIDE(S);3.9Kohm,5%,1W,AF,TP,2.5x6	5.5mm	R905	2001-00044	R-CARBON;	2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ
R416	2008-000253	3 R-FUSIBLE(S);0.47ohm,5%,1W,AF,TP,3.9x10mm		R906	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM	1
R417	2008-001005	) R-FUSIBLE;0.4/ohm,10%,10%,10%,AA,1P,4./X11./m	1. 4. 4. 4	R907	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,1P,1.8X3.2MM	1
R418 D/10	2001-001114	F R-CARBUIN(S);2700HIVI,5%,172VV,AA,17,24X0.4 D CARBUN(S);2700HM/5%,170V/AA,TD1 0V2 2N/	HVIIVI MA	R908 D010	2001-00042		2 2VOLINI 5%, 1/8VV, AA, 1P, 1.8A3.2IVIIV 2 2VOLINI 5% 1/9N/ AA TD1 9V2 2N/	М.Л
R419 R420	2001-000303	3 R-CARDON,27NOΠIVI,37%,170VV,AA,1P,1.0A3.21VI 4 R-METΔI · 75Kohm 5% 1/8W/ΔΔ TP1 8v3 2mm	IIVI	R910 R011	2001-00044	R-CARDON,	2.2KUΠIVI,5 %, 1/6W,AA, 1P, 1.6K3.2W 10KΩHM 5% 1/8W/ΔΔ TP1 8X3 2MM	IVI M
R420	2003-000455	5 R-METAL OXIDE(S):1000hm.5%.2W.AA.TP.4x12	mm	R913	2001-00027	R-CARBON:	1KOHM.5%.1/8W.AA.TP.1.8X3.2MM
R423	2004-004089	R-METAL(S);123Kohm,1%,1/2W,AA,TP,2.5x6.5r	1	R914	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
R601	2001-001114	4 R-CARBON(S);2700HM,5%,1/2W,AA,TP,2.4X6.4	IMM	R915	2001-00042	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
R604	2001-000331	I R-CARBON;12KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ	R916	2001-00042	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
R606	2001-000723	3 R-CARBON;4.3KOHM,5%,1/8W,AA,TP,1.8X3.2N	1M	R917	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM	I
R609	2001-000563	3 R-CARBON;27KOHM,5%,1/8W,AA,TP,1.8X3.2M	М	R918	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM	1
R612	2008-001049	7 R-FUSIBLE(S);3.90hm,5%,2W,AF,TP,3.9X10mm		R922	2001-000429	R-CARBON;	1KUHM,5%,1/8W,AA,1P,1.8X3.2MM	1 1
R013 D615	2008-001049	7 R-FUSIBLE(S);3.901111,3%,270,AF,TP,3.9X1011111 1 D CADDONI-122/OHA/5% 1/0/A/AA TD1 022 28/	N.A.	R923	2001-00042		1KUHIVI,5%,1/8VV,AA,1P,1.8X3.2IVIV 1KUHIVI,5%,1/8VV,AA,TD1 8V2 2MM	I
R702	2001-00033	2 R-CARBON, 12KOHM, 5%, 1/8W, AA, TP, 1.8X3.2W	11VI /IN/	R925	2001-00042	R-CARBON	1KOHM 5% 1/8W AA TP1 8X3 2MM
R703	2001-000812	2 R-CARBON:5.6KOHM,5%,1/8W,AA,TP.1.8X3.2N	1M	R927	2001-00042	R-CARBON:	1KOHM.5%.1/8W.AA.TP.1.8X3.2MM
R704	2001-000290	) R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2N	Μ	R928	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
R705	2001-000003	3 R-CARBON; 3300HM, 5%, 1/8W, AA, TP, 1.8X3.2M	Μ	R930	2001-000734	R-CARBON;	4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ
R706	2001-000290	) R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ	R931	2001-00042	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM	J
R707	2001-000290	) R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ	R932	2001-000290	) R-CARBON;	10KOHM,5%,1/8W,AA,TP,1.8X3.2MM	N
R708	2001-000674	I R-CARBON;3600HM,5%,1/8W,AA,TP,1.8X3.2M	М	R933	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,TP,1.8X3.2MM	1
R709	2003-000458	3 R-METAL UXIDE(S);1000hm,5%,2W,AF,TP,4x12n	nm NA	R934	2001-000429	R-CARBON;	1KOHM,5%,1/8W,AA,1P,1.8X3.2MM	1
R/IU D711	2001-00028	F. R-CARBUIN; 1000HIVI,5%, 1/8W,AA, 1P, 1.8X3.2IVI D. CARBON, 2000HIM E9/, 1/8W,AA, TD1, 8Y2, 2M		R935	2001-00042	R-CARBON;	1 EVOLINA EV 1/01/0 A TD 1 0V2 204	N.A.
R712	2001-00000	5 R-CARBON-3900HIVI,5%,1/8W,AA,TP,1.8A3.2W 5 R-CARBON-3900HM 5% 1/8W/ΔΔ TP1 8X3 2M	M	R930 R037	2001-00024	R-CARDON,	750HM 5% 1/8W/ΔΔ TP1 8X3 2MM	IVI
R712	2001-000938	R-CARBON:680HM 5% 1/8W AA TP1 8X3 2MM	Λ	R938	2001-00096	R-CARBON	750HM 5% 1/8W AA TP1 8X3 2MM	I
R715	2001-000290	0 R-CARBON:10K0HM,5%,1/8W,AA,TP,1.8X3.2N	M	R939	2001-000969	R-CARBON:	750HM.5%.1/8W.AA.TP.1.8X3.2MM	I
R720	2001-000290	) R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ	R940	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	N
R721	2001-000633	3 R-CARBON;30KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ	R941	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	N
R723	2001-000290	) R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ	R942	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	Л
R725	2001-000969	R-CARBON;750HM,5%,1/8W,AA,TP,1.8X3.2MN	Λ	R947	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	N
R/26	2001-000969	7 R-CARBON; /50HM,5%,1/8W,AA, IP,1.8X3.2MN	1	R948	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	A.
R/28	2001-000734	F R-CARBUIN;4./KUHIVI,5%,1/8VV,AA,1P,1.8X3.2N	/IIVI 7v0mm	R949	2001-00052		22KUHIVI,5%,1/8W,AA,1P,1.8X3.2IVII S):10M0UM4E9/ 1/2W/AA,TD24X4/	√I 4 N A N A
R801	2002-001012	R-COMPOSITION, 6.20001011, 10%, 1/200, AA, 1P, 5. R-COMPOSITION-3 3Mohm 10% 1/200 ΔΔ ΤΡ 3.	7x911111 7x9mm	R950 R951	2001-00100	2 R-CARDON	3), ΙΟΙVIOHIVI, 3 %, Ι/2VV, ΑΑ, ΓΡ, 2.4ΛΟ.4 1500HM 5% 1/8W/ΔΔ ΤΡ1 8X3 2MM	Л
R803	1404-001048	8 THERMISTOR-PTC: 70hm 30% 200/220V 270V 1	9A - B	R952	2001-000449	R-CARBON	2 2KOHM 5% 1/8W AA TP1 8X3 2M	M
R804	2001-001128	3 R-CARBON(S); 30KOHM, 5%, 1/2W, AA, TP, 2.4X6.	1MM	R953	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	Л
R805	2003-000994	4 R-METAL OXIDE(S);33Kohm,5%,2W,AF,TP,3.9x1	0mm	R958	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	Λ
R806	2003-000994	1 R-METAL OXIDE(S);33Kohm,5%,2W,AF,TP,3.9x1	0mm	R959	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	N
R807	2001-000117	7 R-CARBON(S);680HM,5%,1/2W,AA,TP,2.4X6.41	MM	R960	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	Λ
R808	2001-000290	) R-CARBON;10K0HM,5%,1/8W,AA,1P,1.8X3.2M	M	R961	2001-000/34	R-CARBON;	4. /KOHM,5%,1/8W,AA, IP,1.8X3.2M	M
R809	2001-001178	3 R-CARBUIN(S);080UHIVI,5%,1/2VV,AA,1P,2.4X0.4 4 D.CARBON(S):260.0hm 5%,1/2V/AA, PK 2,4x6.4	HVIIVI mm	R962 D062	2001-00073		4. / KUHIVI,5%, I/8VV,AA, IP, I.8X3.2IVI 4.7V/04M/5%, 1/8VV,AA, TD1, 8V2, 2M	IVI NA
R811	2001-00113	F R-CARBON(S),3000nm,3 %,1/2W,AA,BK,2.4x0.4 4 R-CARBON(S)·360ohm 5% 1/2W/ΔΔ BK 2.4x6.4	mm	R965	2001-00073	R_CARBON	1KOHM 5% 1/8W/ ΔΔ TP1 8X3 2MM
R812	1404-001045	5 THERMISTOR-NTC:4 70hm 15% 2900K 35 0mV	/ TP	R968	2001-00042	R-CARBON	4 7KOHM 5% 1/8W AA TP1 8X3 2M	М
R813	2001-000022	2 R-CARBON(S);330HM,5%,1/2W,AA,TP,2.4X6.41	MM	R969	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	Л
R814	2001-001125	5 R-CARBON(S);300KOHM,5%,1/2W,AA,TP,2.4X6	.4MM	R970	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	Λ
R815	2004-004089	R-METAL(S);123Kohm,1%,1/2W,AA,TP,2.5x6.5m	ו	RA802	2001-00112	R-CARBON	S);330KOHM,5%,1/2W,AA,TP,2.4X6.	4MM
R816	2004-001983	3 R-METAL(S);2.49Kohm,1%,1/2W,AA,TP,2.4x6.4		RB802	2001-00112	R-CARBON	S);330KOHM,5%,1/2W,AA,TP,2.4X6.	4MM
R817	2001-000085	R-CARBON(S);100KOHM,5%,1/2W,AA, IP,2.4X6	.4MM	RL02	2001-00028	R-CARBON;	1000HM,5%,1/8W,AA,TP,1.8X3.2MM	۸ ۵ F
R818	2003-000490	J R-METAL OXIDE(S);120hm,5%,2W,AA,1P,4x12m	im m	RLU01	3501-001040	) RELAY-POW	/ER;12VDC,500mVV,10A,1FormA,15m	S,5m
R819 P820	2003-000004	FINE TAL UNIDE(S);3301111,5%,200,AF, 1P,4X12111 P_FINE FILSTRIF(S):0.270hm 10%, 200/ AFTP 2.0v10mr	\|\|\| \|	RU102 P\//701	2001-000290		1UKUHIVI,3%,1/8W,AA,1P,1.8X3.2IVII K-33K/24K/75y3 5%,1/8W/Y SIDAD	VI
R821	2000-00023	4 R-CARBON(S):360ohm 5% 1/2W/AA BK 2 4x6 4	mm	SF101	2904-001070	) FILTER-SAM	/ AV·38 9MHz SIP5K TP14 5dB PAL-B	4
R822	2004-001390	0 R-METAL(S):1Kohm.2%.1/2W.AA,TP.2.4x6.4mm		⚠ T401	AA26-50001	B HORIZ.DRIV	E:7.1mH.102uH.10-20uH.YL081.ST	,
R823	2003-000616	5 R-METAL OXIDE(S);27ohm,5%,2W,AA,TP,4x12n	ım	∕ ₹ T444	AA26-30001	Y TRANS-FLY	BACK;-,FSV-20A001,20,125V
R824	2001-000786	5 R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2M	Μ	/ \	AA26-20007	UTRANS-SW	ITCHING;-,90~260V,125V/16.5V/9.5V	,-,EE
R825	2006-001020	) R-CEMENT;3.9ohm,5%,5W,CB,TP,10.5x14x23.		TC01	2202-00203	7 C-CERAMIC	,MLC-AXIAL;100nF,80-20%,50V,Y5V,	FP,2.2x3.
R827	2003-000713	3 R-METAL OXIDE(S);47ohm,5%,2W,AF,TP,4x12m	m	TC02	2202-000143	3 C-CERAMIC	,MLC-AXIAL;10pF,5%,50V,NPO,TP,1.9	łx3.5,-
R828	2001-000/34	1 R-CARBON;4./KOHM,5%,1/8W,AA,1P,1.8X3.2N	1M	1003	2202-000162	2 C-CERAMIC	,MLC-AXIAL;.015NF,5%,50V,SL,1P,3.	2X1.9MM,-
R829	2001-000734	F R-CARBUN;4./KUHIVI,5%,1/8W,AA,1P,1.8X3.2N	/11V1 IN 4	TC04	2202-000790	C CERAIVIL	, MIC AXIAL; INF, 10%, 50V, Y5P, 1P, 3.5	XI.9IVIIVI,-
R030 D021	2001-00060	F R-CARDON, JOROHIVI, J %, 1/OW, AA, 1P, 1.0A3.200	mm	TC05	2202-00203		MIC AVIAL 1001F,00-2076,30V,13V,	TD 2 2v2
R832	2003-001098	5 R-CARBON:47KOHM 5% 1/8W/ AA TP1 8¥3 2N/	M	TC07	2202-00203	C-CERAMIC	., MIC-AXIAL, 10011,00-20%,000,100,	TP.2.2x3.
R834	2003-000664	4 R-METAL OXIDE(S);330hm.5%.2W.AF.TP.4x12m	m	TC08	2202-00203	C-CERAMIC	,MLC-AXIAL;100nF.80-20%.50V.Y5V.	TP,2.2x3.
R835	2003-000760	) R-METAL OXIDE(S);6.80hm,5%,2W,AA,TP.4x12r	nm	TC09	2202-00203	7 C-CERAMIC	,MLC-AXIAL;100nF,80-20%,50V,Y5V.	TP,2.2x3.
R836	2003-000760	) R-METAL OXIDE(S);6.80hm,5%,2W,AA,TP,4x12r	nm	TC11	2401-000242	2 C-AL;100uF,	20%,10V,GP,TP,5x11,5
R837	2003-000490	) R-METAL OXIDE(S);12ohm,5%,2W,AA,TP,4x12m	ım	TC12	2202-00079	C-CERAMIC	,MLC-AXIAL;150pF,10%,50V,Y5P,TP,3	.5x19,-
R856	2003-000803	3 R-METAL OXIDE(S);82Kohm,5%,2W,AA,TP,4x12	mm	TD02	0401-00000	5 DIODE-SWI	TCHING;1N4148,75V,200MA,DO-35,7	ĩР
R858	2003-000706	R-METAL OXIDE(S);47Kohm,5%,2W,AA,TP,4.3x1	I2mm	TD04	0401-00000	DIODE-SWI	ICHING;1N4148,75V,200MA,DO-35,1	iP TD
K860	2001-001054	+ K-UAKBUN(S); 1.6KUHM,5%,1/2W,AA, 1P,2.4X6.	4IVIIVI	ID06	0401-00000		TCHING; IN4148, /5V,200MA,DO-35,7	רח רח
R009 R001	2008-000253	3 R-1 USIDLE(S),U.47UHH,5%,TVV,AF,TP,3.9XTUMM 9 R-CARBON-1KOHM/5% 1/8/M/ΔΔ TP1 8Y2 2MM	Λ	TIC01	1201-00000	S IC-PAI DECI	10111110, 1114 140,737,200171A,DU-35,1 ΩDER•SAA5254 DIP70P - PLASTIC 4 F	SV
11/01	2001 000421		••	11001	1207 UUUJZ	, IO INE DEU		• •

Page 78

Remark

Loc. No.	Code No.	Description ; Specification Ren	Loc. No.	Code No.	Description ; Specification
TL 01	2701 000170		CN 421.4	2202 000217
TD01	2/01-0001/0		CIVI314	2202-000210	C CERAIVIIC, IVILC-AXIAL; .UZ/INF, 5%, 50V, SL, IP,
TROT	2001-000232		CM214	2201-002031	C CERAIVIIC, DISC, SPF, 0.2 SPF, 50 V, NPO, 1P, 53 SI
TRU2	2001-000425	R-CARBUN; IKUHIVI, 5%, I/8VV, AA, IP, I.8X3.2IVIIVI	CIVI310	2202-000802	C-CERAIVIIC, IVILC-AXIAL; 3900F, 10%, 50V, 15P, 1
TR04	2001-000563	3 R-CARBON;2/KOHM,5%,1/8W,AA,1P,1.8X3.2MM	CIVI317	2401-000603	C-AL; IUF, 20%, 50V, GP, IP, 5X11, 5
1R05	2001-000732	FR-CARBUN;4./KOHM,5%,1/8W,AA,1P,1.8X3.2MM	CM318	2202-000162	C-CERAMIC,MLC-AXIAL;.015NF,5%,50V,SL,1P,
TR06	2001-000734	R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM	CM319	2201-000345	C-CERAMIC,DISC;200pF,5%,50V,SL,TP,6.3*3,5
TR07	2001-000734	R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM	CM320	2202-000849	C-CERAMIC,MLC-AXIAL;18pF,5%,50V,CH,TP,3.
TR08	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2MM	CM321	2202-000127	C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5
TR09	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2MM	CM322	2401-001363	C-AL;470uF,20%,16V,GP,TP,10x12.5,5
TR10	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2MM	CM323	2401-002235	C-AL;10uF,20%,16V,GP,TP,5x11mm,5mm
TR13	2001-000472	R-CARBON:2.7KOHM.5%.1/8W.AA.TP.1.8X3.2MM	CM324	2401-000914	C-AL:22uF.20%.16V.GP.TP.5x11.5
	AA40-10006	V TUNER-E/S: TECC2949PG30B(S), PAI -B/G, TR, 18	CM325	2202-000796	C-CERAMIC MI C-AXIAL: 1NE 10% 50V Y5P TP.
TU002	AA40-10006	T TUNER-E/S TECC2849PG29A(S) PAL-B/G TR 18	CM326	2401-001333	C-AI ·470nF 20% 50V GP TP 5x11 5
TX01	2801-001478	CRYSTAL-UNIT:27 0MHz 25ppm 28-ABR 20pE 40ph	CM327	2202-002037	C-CERAMIC MI C-AXIAI 100nF 80-20% 50V Y5
X202	2801-000274	CRYSTAL-UNIT-4 433619MHz 30ppm 28-AAM 20pF	CM328	2401-002235	C-AI 100 F 20% 16V GP TP 5x11mm 5mm
X901	2801-001480	) CRYSTAL-UNIT-4 194304MHz 20nnm 28-ABO 12nF	CM329	2202-002037	C-CERAMIC MI C-AXIAI 100nE 80-20% 50V YE
7101	2903-001010	FILTER-CERAMIC:TR 5 5/5 742MHz TP-	CM331	2401-000603	C-AL:1020% 50V GPTP5x11 5
7102	2003-001040		CM332	2/01/000000	C. AL:10/JE 20% 16\/CPTP5v11mm 5mm
71/02	2903-001040		CM222	2401-002233
2K01	2903-00010-		CIVIDDD	2401-000370	C-AL, TUL, 2070, 307, 07, 17, 487, 3
ZKUZ	2903-000184	FILLER-GERAIVIIG, DP, 0.01VIAZ, +-00KAZ, 00B, -, 1P,-	01/1334	2202-000127	C-CERAIVIIC, IVILC-ANIAL; IUIIF, +80-20%, 25V, 10
			CIVI335	2202-000127	C-CERAIVIIC,IVILC-AXIAL;10nF,+80-20%,25V,Y5

ASSY-M/DECK

* AA94-00193NASSY-M/DECK·M-421YK/XEG-S 2HD - - C15A

AA39-20189ALEAD-CONNECTOR,ASSY;-,YFH800-01,HR50009-2,1P,300,1

ASSY-FRAME

* AA90-40008DASSY-FRAME;TS-DECK,PAL SESA 20,21

AA61-00004AFRAME-DECK;-,TVN-502V,-,V2,-,BLK,-,-,-AA63-00012ACOVER-FRAME,TOP;-,TVCR,PAL,SECC,-,-,-AA63-40313A SHIELD-BOTTOM;-,SPTE,T0.5,-,TVN334V

ASSY-DECK

* AA91-40112AASSY-DECK;-,2HD,X-9 PAL SESA

ASSY-PCB,M/DECK

* AA95-00091V ASSY-PCB,M/DECK;-,-,C15A,2HD,PAL,-,NTPB,KEY

BDM301	3301-000287	CORE-FERRITE BEAD;AA,3.5x1.0x6.0mm,1500,2400G
BDM303	3301-000287	CORE-FERRITE BEAD;AA,3.5x1.0x6.0mm,1500,2400G
CM101	2401-000603	C-AL;1uF,20%,50V,GP,TP,5x11,5
CM102	2401-000603	C-AL;1uF,20%,50V,GP,TP,5x11,5
CM103	2401-000832	C-AL;220uF,20%,25V,GP,TP,8x11.5,5
CM104	2401-000302	C-AL;100uF,20%,25V,GP,TP,6.3x11,5
CM105	2401-000302	C-AL;100uF,20%,25V,GP,TP,6.3x11,5
CM106	2401-000480	C-AL;10uF,20%,50V,GP,TP,5x11,5
CM107	2202-002037	C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM108	2202-002037	C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM109	2401-000480	C-AL;10uF,20%,50V,GP,TP,5x11,5
CM110	2401-000302	C-AL;100uF,20%,25V,GP,TP,6.3x11,5
CM111	2401-000302	C-AL;100uF,20%,25V,GP,TP,6.3x11,5
CM112	2202-002037	C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM113	2401-000832	C-AL;220uF,20%,25V,GP,TP,8x11.5,5
CM114	2202-002037	C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM115	2202-002037	C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM116	2202-000796	C-CERAMIC,MLC-AXIAL;1NF,10%,50V,Y5P,TP,3.5X1.9MM
CM117	2202-002037	C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM301	2202-002037	C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM303	2301-000383	C-FILM,PEF;10nF,5%,50V,TP,6x7x3.2mm,5mm
CM304	2401-000426	C-AL;10uF,20%,16V,GP,TP,3.5x5,5
CM305	2301-000342	C-FILM,PEF;2.2nF,5%,50V,TP,7.4x3.9x13mm,5
CM306	2301-000192	C-FILM,PEF;1nF,5%,50V,TP,5.3x10mm,5mm
CM307	2401-001250	C-AL;4.7uF,20%,35V,GP,TP,4x5,5
CM308	2401-000660	C-AL;2.2uF,20%,50V,GP,TP,5x11,5
CM309	2305-000427	C-FILM,MPEF;47nF,5%,100V,TP,7.5x12.5x3.5,5
CM310	2401-000603	C-AL;1uF,20%,50V,GP,TP,5x11,5
CM311	2202-002037	C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM312	2401-002291	C-AL;47uF,20%,16V,GP,TP,6.3x5,5
CM313	2202-000127	C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5

CM314	2202-000216 C-CERAMIC,MLC-AXIAL;.027NF,5%,50V,SL,TP,3.5X1.9MM
CM315	2201-002031 C-CERAMIC,DISC;5pF,0.25pF,50V,NPO,TP,5x3mm,5m
CM316	2202-000862 C-CERAMIC,MLC-AXIAL;390pF,10%,50V,Y5P,TP,3.5x1.9,-
CM317	2401-000603 C-AL;1uF,20%,50V,GP,TP,5x11,5
CM318	2202-000162 C-CERAMIC,MLC-AXIAL;.015NF,5%,50V,SL,TP,3.5X1.9MM
CM319	2201-000345 C-CERAMIC,DISC;200pF,5%,50V,SL,TP,6.3*3,5
CM320	2202-000849 C-CERAMIC,MLC-AXIAL;18pF,5%,50V,CH,TP,3.5x1.9,-
CM321	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5
CM322	2401-001363 C-AL;470uF,20%,16V,GP,TP,10x12.5,5
CM323	2401-002235 C-AL;10uF,20%,16V,GP,TP,5x11mm,5mm
CM324	2401-000914 C-AL;22uF,20%,16V,GP,TP,5x11,5
CM325	2202-000796 C-CERAMIC,MLC-AXIAL;1NF,10%,50V,Y5P,TP,3.5X1.9MM,
CM326	2401-001333 C-AL;470nF,20%,50V,GP,TP,5x11,5
CM327	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM328	2401-002235 C-AL;10uF,20%,16V,GP,TP,5x11mm,5mm
CM329	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM331	2401-000603 C-AL;1uF,20%,50V,GP,TP,5x11,5
CM332	2401-002235 C-AL;10uF,20%,16V,GP,TP,5x11mm,5mm
CM333	2401-000598 C-AL;1uF,20%,50V,GP,TP,4x7,5
CM334	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5
CM335	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5
CM336	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5
CM337	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5
CM338	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5
CM339	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM340	2401-002144 C-AL;47uF,20%,16V,GP,TP,5x11,5
CM341	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5
CM342	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM343	2401-002144 C-AL;47uF,20%,16V,GP,TP,5x11,5
CM344	2401-000598 C-AL;1uF,20%,50V,GP,TP,4x7,5
CM345	2202-000819 C-CERAMIC,MLC-AXIAL;47nF,+80-20%,50V,Y5V,TP,3.5x19
CM346	2401-000598 C-AL;1uF,20%,50V,GP,TP,4x7,5
CM347	2202-000807 C-CERAMIC,MLC-AXIAL;22nF,+80-20%,25V,Y5V,TP,3.5x19
CM348	2401-000598 C-AL;1uF,20%,50V,GP,TP,4x7,5
CM349	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7.5
CM350	2202-000819 C-CERAMIC,MLC-AXIAL;47nF,+80-20%,50V,Y5V,TP,3.5x19
CM351	2202-000807 C-CERAMIC,MLC-AXIAL;22nF,+80-20%,25V,Y5V,TP,3.5x19
CM352	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.2x3.
CM353	2401-002144 C-AL:47uF,20%,16V,GP,TP,5x11,5
CM354	2202-002037 C-CERAMIC.MLC-AXIAL:100nF.80-20%.50V.Y5V.TP.2.2x3.
CM355	2401-000914 C-AL:22uF.20%.16V.GP.TP.5x11.5
CM356	2401-002462 C-AL;33uF,20%,16V,GP,TP,5x11,5
CM357	2401-002619 C-AL:47uF.20%.25V.GP.TP.5x11.5
CM358	2202-002037 C-CERAMIC.MLC-AXIAL:100nF.80-20%.50V.Y5V.TP.2.2x3.
M359	2201-000611_C-CERAMIC.DISC:56pE5%.50V.CH.TP.6.5x3.5
CM360	2201-000611 C-CERAMIC.DISC:56pE5%.50V.CH.TP.6.5x3.5
CM361	2201-000982 C-CERAMIC.DISC:10nE+80-20%.50V.Y5V.TP.6.5x3.
M362	2301-000301 C-FILM PEE 6 8nE 5% 50V TP 6 5X5 5X3 0X5
M363	2301-000301 C-FILM PEF 6 8nE 5% 50V TP 6 5X5 5X3 0X5
M364	2301-000314 C-FILM PEF:8 2nE 5% 50V TP.6 5x3 0x5 5mm
M365	2401-000027 C-AI-4 7uE 20% 50V GPTP5x11 5
M367	2202-002037 C-CERAMIC MI C-AXIAI 100nE 80-20% 50V Y5V TP 2 2x3
M368	2301_000175_C_EII M PEF·15nE5% 50V TP 7 1v3 5v13mm 5m
M370	2301-000173 C HENRE TOTA 50,300, 11,711,83,501 500 70 200
M371	2301-000301 C_EII M PEE 6 8nE 5% 50V TP 6 5X5 5X3 0X5
M372	2301-000301 C FIEW, EL, 0.011, 370, 300, 11, 0.370, 370, 000, 1
M373	2401-002144 C-AL-470E 20% 16V GPTP5x11 5
`M374	2202-002037 C_CERAMIC MIC_AXIAI 100pE 80-20% 50V V5V/TP2 2x3
M375	2401-002009 C-AL-1000E20% 16VGPTP6 3v7 5
M376	2202-002007 C //E,10001,2070,100,01,11,0.077,0 2202-002007 C //EDAMIC MIC AVIAL-100pE 80-20% 50V V5V/TD2 2v3
M370	2202-002037 C-CERAMIC, MIC-AXIAE, 10011,00-2070,507,137,11,2.2x3.
M379	2202-000127 C-CERAMIC,MEC-AXIAE,1011,+00-2070,237,137,11,-,7.5
101370	2202-000127 C-CERAMIC, MIC AVIAL-1011, T00-2070, 239, 139, 11, -, 7.3
101377	2202-000127 C-CENAIVIC, MIC AVIAL, 1011, +00-2070, 25V, 15V, 1F,-, 7.5
101300
101305
0001711	ZZUZ-UUZUJI U-UERAIVIIU,IVILU-ANIAL,IUUIIF,8U-ZU%,0UV,10V,117,2283.
1000/
N1307	2202-002037 C-CEDAMIC MIC AXIAL: 1000F.80-20%,50V,Y5V,1P,2.2X3.
N1390	2202-002037 C-CERANIC, MIC-AXIAL; 100-E00, 2004, 500, Y5V, 1P,2.2X3.
JVI371	2202-002037 U-UERAIVIU, MILU-AXIAL; 1000F,80-20%,50V,Y5V,1P,2.2X3.
JIVI392
JVI393	2202-002037 C-CERAIMIC, MLC-AXIAL; TOURF, 80-20%, 50V, Y5V, IP, 2.2x3.
JVI395	2202-0001279 C-CERAIMIC, MLC-AXIAL; 4/pF, 5%, 50V, SL, 1P, 3.5x19,-
JIVI397	2202-000127 C-CERAINIC, IVIC-AXIAL; 1001, +80-20%, 25V, Y5V, 1P,-, 7.5
JV1601	2202-000806 C-CERAMIC,MLC-AXIAL;220pF,10%,50V,Y5P,1P,3.5x19,-
JM602	2301-000310 C-HLM,PEF;68nF,5%,50V,1P,8.0X8.5X4.0X5,5
JM603	2301-000310_C-FILM,PEF;68nF,5%,50V,1P,8.0X8.5X4.0X5,5

Page 79

Loc. No.	Code No. Description ; Specification Re	emark	Loc. No.	Code No.	Description ; Specification	Remark

CM604	2301-000224 C-FILM.PEF:22nF.5%.50V.TP.7.4x3.9x13mm.5m		LM307	2701-000002	INDUCTOR-AXIAL:100uH.10%.4.2x9.8mm
CM605	2401-002291 C-AI:47uE20%.16V.GP.TP.6.3x5.5		LM308	2702-000120	INDUCTOR-RADIAL:15mH.5%.6.2x7.4mm
CM606	2202-002037 C-CERAMIC.MI C-AXIAI :100nE.80-20% .50V.Y5V.TP.2.	2x3.	LM309	2701-000112	INDUCTOR-AXIAL:100uH.10%.2.8x7mm
CM607	2202-000205 C-CERAMIC MI C-AXIAI :22pE.5% 50V.SL TP.1.9x3.5		LM310	2701-000180	INDUCTOR-AXIAL:33uH.5%,2.5x3.4mm
CM608	2202-000205 C-CERAMIC.MLC-AXIAL:22pF.5%,50V.SL.TP.1.9x3.5		LM311	2701-000118	INDUCTOR-AXIAL:120uH.10%.2.5x3.4mm
CM609	2202-000205 C-CERAMIC MI C-AXIAI :22pE.5% 50V.SL TP.1.9x3.5		I M601	2701-000002	INDUCTOR-AXIAL:100uH.10%.4.2x9.8mm
CM610	2202-000205 C-CERAMIC.MLC-AXIAL:22pF.5%,50V.SL.TP.1.9x3.5		LM602	2701-000002	INDUCTOR-AXIAL:100uH,10%,4.2x9.8mm
CM611	2401-000598 C-AL:1uE20%.50V.GP.TP.4x7.5		LM603	2701-000002	INDUCTOR-AXIAI :100uH.10%.4.2x9.8mm
CM612	2202-000127 C-CERAMIC.MI C-AXIAI :10nE.+80-20%.25V.Y5V.TP	7.5	LM604	2701-000002	INDUCTOR-AXIAI :100uH.10%.4.2x9.8mm
CM613	2202-000127 C-CERAMIC.MI C-AXIAI :10nE+80-20%.25V.Y5V.TP	7.5	LM605	2701-000002	INDUCTOR-AXIAI :100uH.10%.4.2x9.8mm
CM614	2401-001250 C-AL-4 7uE 20% 35V GPTP 4x5 5		PTM601	0604-001122	PHOTO-INTERRUPTER TR 0.065% 150mW DIP-4	BK
CM615	2202-000127 C-CERAMIC.MI C-AXIAI :10nE +80-20% 25V Y5V TP	7.5	PTM602	0604-001122	PHOTO-INTERRUPTER:TR.0.065% 150mW.DIP-4.	BK
CM616	2401-002619 C-AI:47uE20%.25V.GP.TP.5x11.5		OM101	0501-000316	TR-SMALL SIGNAL KSA928A-YPNP.1W.TO-92L-	.160-
CM617	2401-002619 C-AL:47uF.20%.25V.GP.TP.5x11.5		QM102	0504-000116	TR-DIGITAL:KSR1001.NPN.300MW.4.7K/4.7K.TO	)-92.TP
CM621	2401-000302 C-AL;100uF,20%,25V,GP,TP,6.3x11,5		QM106	0501-000362	TR-SMALL SIGNAL;KSA2328A-Y,NPN,1W,TO-92I	L,TP,16
CM622	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,	7.5	QM107	0501-000362	TR-SMALL SIGNAL;KSA2328A-Y,NPN,1W,TO-92I	L,TP,16
CM623	2401-000302 C-AL;100uF,20%,25V,GP,TP,6.3x11,5		QM301	0501-000398	TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,	TP,120-
CM624	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,	7.5	QM302	0501-000398	TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,	TP,120-
CM627	2401-000302 C-AL;100uF,20%,25V,GP,TP,6.3x11,5		QM304	0501-000303	TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T	P,120-
CM628	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,	7.5	QM305	0501-000303	TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T	.°P,120-
CM629	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.	.2x3.	QM306	0501-000398	TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,	TP,120-
CM630	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.	.2x3.	QM308	0501-000398	TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,	TP,120-
CM633	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.	.2x3.	QM311	0501-000303	TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T	. ^• P,120-
CM634	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,	7.5	QM312	0501-000010	TR-SMALL SIGNAL;KSC1008,NPN,800mW,TO-92	2,TP,120
CM635	2202-000127 C-CERAMIC,MLC-AXIAL;10nF,+80-20%,25V,Y5V,TP,-,7	7.5	QM313	0501-000231	TR-SMALL SIGNAL;2SD1468SQ,NPN,300mW,TO	-92S,TP,
CM636	2202-000183 C-CERAMIC,MLC-AXIAL;2.2NF,20%,16V,Y5R,TP,3.5X	1.9MM,	QM314	0501-000231	TR-SMALL SIGNAL;2SD1468SQ,NPN,300mW,TO	-92S,TP,
CM637	2202-000183 C-CERAMIC,MLC-AXIAL;2.2NF,20%,16V,Y5R,TP,3.5X	1.9MM,	QM315	0501-000303	TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T	.°P,120-
CM638	2202-000263 C-CERAMIC,MLC-AXIAL;470pF,10%,50V,Y5P,TP,3.5x1	9,-	QM317	0501-000389	TR-SMALL SIGNAL;KSC815,NPN,400mW,TO-92,	TP,120-
CM639	2401-000922 C-AL;22uF,20%,16V,GP,TP,5x5,5		RM101	2001-000273	R-CARBON;100KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
CM640	2202-000121 C-CERAMIC,MLC-AXIAL;100pF,10%,50V,Y5P,TP,1.9x3	8.5,-	RM102	2001-001122	R-CARBON(S);3.9KOHM,5%,1/2W,AA,TP,2.4X6.4	MM
CM641	2401-002009 C-AL;100uF,20%,16V,GP,TP,6.3x7,5		RM103	2001-000449	R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
CM642	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.	.2x3.	RM106	2001-000449	R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
CM645	2202-002037 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V,TP,2.	.2x3.	RM107	2001-001107	R-CARBON(S);220ohm,5%,1/2W,AA,TP,2.4x6.4m	m
CM647	2401-002291 C-AL;4/uF,20%,16V,GP,1P,6.3x5,5		RM108	2001-0006/4	R-CARBON;3600HM,5%,1/8W,AA,1P,1.8X3.2MN	Λ
CIVI649	2202-002037 C-CERAIMIC, MIC-AXIAL; 100, F80-20%, 50V, Y5V, 1P,2.	.2X3.	RIVI302	2001-000812	R-CARBON;5.6KUHIVI,5%,1/8W,AA,1P,1.8X3.2MI	iVI 4
CIVI65 I	2202-002037 C-CERAIVIC, MILC-AXIAL; 1000F,80-20%,500, 159, 17,2.	.2X3.	RIVI303	2001-000331	R-CARBON; 12KUHM, 5%, 1/8W, AA, 1P, 1.8X3.2MM	/\|
CINIVITUT	AA39-2000/ALEAD CONNECTOR ASSY:-, (BINH250-10,07090-10, II)	120200	RIVI304	2001-000043	R-CARBOIN;330KUHIVI,3%,1/8WV,AA,TP,1.8X3.2IVI D.CARBON,1/00UNAEV(1/00V/AA,TD1.0V2.2NA)	4
CINIVITU2 CNIM201	AA39-2007 ID LEAD-CONNECTOR EDC/EC/DIC:0D1 25mm STDAICUT SN	128,300	RIVI305	2001-000384	K-CARBUIN; 1000HIVI,5%, 1/8VV,AA, 1P, 1.8X3.2IVIN D CADDONI-222/OHM/ 5%, 1/01/0 A TD1 022 2M/M	/1
CNIVISUT	2700-0000590 CONNECTOR FPC/FC/FIC.0F, 1.2011111, STRAIGHT, SN		RIVI300	2001-000000	CADDON:1 EVOLUM EQ. 1/0W, AA, TD1 0V2 2M	71 N.4
CNIVI302	3710.000405. CONNECTOR SOCKET-2020.2.5mm -		RM307	2001-000241	P CAPRON-1KOHM 5% 1/8W/AA, TP1 8Y2 2MM	.VI
CNM51A	3809-001111 CABLE-FLAT-30V 80C 130mm 7P1 25mm LII 2896		RM312	2001-000429	R-CARBON-1KOHM 5% 1/8W AA TP1 8X3 2MM
CNM601	AA39-20603ALEAD CONNECTOR-ASSY:- GIL-S-2S-S2C2-S YBH200	J-02 2P	RM313	2001-000472	R-CARBON 2 7KOHM 5% 1/8W AA TP1 8X3 2M	М
CNM602	3708-001131 CONNECTOR-FPC/FC/PIC:5P.1.25mm.STRAIGHT.SN	,	RM314	2001-000924	R-CARBON:6800HM.5%.1/8W.AA.TP.1.8X3.2MN	Л
CNM603	3711-003749 CONNECTOR-HEADER;BOX,8P,2R,2mm,STRAIGHT,SN	N	RM315	2001-000515	R-CARBON;2200HM,5%,1/8W,AA,TP,1.8X3.2MN	Л
CNM611	3711-000683 CONNECTOR-HEADER;BOX,13P,1R,2mm,STRAIGHT,S	SN	RM316	2001-000221	R-CARBON;1.2KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
CNM64A	3809-001112 CABLE-FLAT; 30V, 80C, 130mm, 5P, 1.25mm, UL2896		RM317	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
DM101	0402-000132 DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP		RM318	2001-000003	R-CARBON;3300HM,5%,1/8W,AA,TP,1.8X3.2MN	Л
DM102	0402-000132 DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP		RM319	2001-000003	R-CARBON;3300HM,5%,1/8W,AA,TP,1.8X3.2MN	Л
DM104	0402-000132 DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP		RM323	2001-000241	R-CARBON;1.5KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
DM107	0401-000005 DIODE-SWITCHING;1N4148,75V,200MA,DO-35,TP		RM324	2001-000734	R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
DM108	0402-000132 DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP		RM325	2001-000515	R-CARBON;2200HM,5%,1/8W,AA,TP,1.8X3.2MN	Л
DM109	0401-000005 DIODE-SWITCHING;1N4148,75V,200MA,DO-35,TP		RM327	2001-000281	R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2MN	Л
DM110	0402-000132 DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP		RM328	2001-000800	R-CARBON;5.1KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
DM111	0402-000132 DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP		RM329	2001-000969	R-CARBON;750HM,5%,1/8W,AA,TP,1.8X3.2MM
DM305	0401-000005 DIODE-SWITCHING;1N4148,75V,200MA,DO-35,TP		RM330	2001-000037	R-CARBON(S);3300HM,5%,1/2W,AA,TP,2.4X6.4M	MM
DM601	0401-000005 DIODE-SWITCHING;1N4148,75V,200MA,DO-35,TP		RM331	2001-000723	R-CARBON;4.3KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
DM602	0401-000005 DIODE-SWITCHING;1N4148,75V,200MA,DO-35,TP		RM333	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
DM606	0402-000132 DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP		RM334	2001-000472	R-CARBON;2.7KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
DM610	0402-000132 DIODE-RECTIFIER;1N4004,400V,1A,DO-41,TP		RM335	2001-000232	R-CARBON;1.3KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
DM611	0401-000005 DIODE-SWITCHING;1N4148,75V,200MA,DO-35,1P		RM338	2001-000977	R-CARBON;8.2KOHM,5%,1/8W,AA,1P,1.8X3.2M	М
FLIVI301	AA26-10006C TRANS-IF;-, /MF,BIAS,2.4MH, /MM,-,65.3KHZ,ST,-		RIVI339	2001-000258	R-CARBON; 1.8KOHM, 5%, 1/8W, AA, TP, 1.8X3.2M	iVI
GPIVI001	AA03-403TTA GROUND-PLATE, PUB;-, PBS, TU.3, TVN334V,-		RIVI340	2001-000449	K-CARBUN;2.2KUHIVI,5%, I/8W,AA, IP, I.8X3.2WI D.CARDON,1KOUMES/ 1/0W/AA, TD1 9X2 2MM	iVI
	1203-000100 IC-POSI.ADJUSI REG., / 0K12, 10-220, 3P, -, -, 12V, -, 010+	t	RIVI341	2001-000429	CARDON, INUTIVI, 370, I/OVV, AA, IP, I.OA3.2IVIIVI D.CARDON, 42VOLIMERY, 1/OVV, AA, TD1, 0V2, 2MM	4
ICM301	1203-000290 IC-POSI.FIXED REG.,7609,10-220,38,-,PLASTIC,6.03/ 1204_001410 IC-VIDEO DDOCESS/LA71500M/ OED100D_ DLASTIC 7/	V	RIVI342 DM3/3	2001-000700	CARDON,43KOHN,5%,170W,AA,1P,1.0A3.2000 P.CARRON-7 5KOHM 5%, 1/8W/AA, TP1 8Y3 2MI	71 N.4
ICM601	AA13-00011A [C-MC] - [PD78/007-107 8RIT CHIPTE-5021/ 100 1/	X20	RM343	2001-000/47	. R-CARBON-2 2MOHM 5% 1/8/Λ/ ΔΔ TP1 8Y2 2M	11.4
ICM602	1003-001162 IC-MOTOR DRIVER KA3082 SIP10PIN 25MIL DOUBL	F	RM345	2001-000734	R-CARBON-4 7KOHM 5% 1/8W AA TP1 8X3 2M	M
ICM603	1203-000642 IC-RESET:572,TO-92.3PPLASTIC.2.35/2.	-,	RM346	2001-000472	R-CARBON;2.7KOHM,5%.1/8W.AA.TP.1.8X3.2M	M
LDM601	AA91-60318AASSY-HOLDER, LED;-, ABS, HB.BLK. IR LED. TS-DFCK		RM347	2001-000832	R-CARBON;5100HM,5%,1/8W.AA.TP.1.8X3.2MM	Л
LM101	2701-000002 INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm		RM348	2001-000832	R-CARBON;5100HM,5%,1/8W,AA,TP,1.8X3.2MN	Л
LM301	2701-000002 INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm		RM349	2001-000221	R-CARBON;1.2KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
LM302	2701-000207 INDUCTOR-AXIAL;56uH,5%,2.5x3.4mm		RM350	2001-000812	R-CARBON;5.6KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
LM303	2701-000118 INDUCTOR-AXIAL;120uH,10%,2.5x3.4mm		RM351	2001-000800	R-CARBON;5.1KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
LM304	2701-000002 INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm		RM352	2001-000006	R-CARBON;2.4KOHM,5%,1/8W,AA,TP,1.8X3.2M	М
LM305	2701-000002 INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm		RM353	2001-000904	R-CARBON;6200HM;5%;1/8W;AA;TP;1.8X3.2MN	/
LIVI306	2701-000002_INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm		RM354	2001-000522	: r-carbon;22k0hm,5%,1/8W,AA,1P,1.8X3.2MM	J I

Page 80

Loc. No.	Code No.	Description ; Specification	Remark	Loc. No.	Code No.	Description ; Specification	Remark
RM356	2001-000405	5 R-CARBON:1800HM.5%.1/8W.AA.TP.1.8	X3.2MM	RM682	2001-000429	P. R-CARBON:1KOHM.5%.1/8W.AA.TP.1.8X3.	.2MM
RM357	2001-000780	R-CARBON;4700HM,5%,1/8W,AA,TP,1.8	X3.2MM	RM683	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.	.2MM
RM358	2001-000258	R-CARBON;1.8KOHM,5%,1/8W,AA,TP,1.	8X3.2MM	RM684	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.	.2MM
RM359	2001-000458	8 R-CARBON;2.20HM,5%,1/8W,AA,TP,1.8	X3.2MM	RM685	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.	.2MM
RM360	2001-000290	) R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	RM686	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.	.2MM
RM361	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8	(3.2MM	RM687	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.	.2MM
RM362	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,1P,1.8	(3.2MM	RM688	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,1P,1.8X3.	.2MM
RIVI363	2001-000522	2 R-CARBON;22KUHIVI,5%,1/8W,AA,1P,1.8		RIVI689	2001-000429	7 R-CARBON; IKUHIVI, 5%, I/8W, AA, IP, I.8X3.
RIVI304 RM365	2001-00041	I R-CARBON; I8KOHIVI, 3%, I/8VV, AA, IP, L. I P.CAPRONEA 7KOHM 5%, 1/8W/ AA TD1	8X3.2IVIIVI 8X3.2IVIIVI	RIVI090 DM601	2001-000429	K-CARBUN, IKUHIVI, 5%, I/8W, AA, IP, I.8A3. P.CAPRONI IKOHM 5%, 1/8W, AA, TP1, 8Y3.
RM366	2001-000766	5 R-CARBON 43KOHM 5% 1/8W AA TP1 8	3X3 2MM	RM692	2001-000429	R-CARBON 1KOHM 5% 1/8W AA TP1 8X3	2MM
RM367	2001-000947	7 R-CARBON; 7.5KOHM, 5%, 1/8W, AA, TP, 1.	8X3.2MM	RM693	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.	.2MM
RM369	2001-000800	R-CARBON;5.1KOHM,5%,1/8W,AA,TP,1.	8X3.2MM	RM694	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.	.2MM
RM370	2001-000008	3 R-CARBON;15KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	RM696	2001-000290	R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X	3.2MM
RM371	2001-001000	) R-CARBON;82KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	RM697	2001-000290	R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X	3.2MM
RM372	2001-000515	5 R-CARBON;2200HM,5%,1/8W,AA,TP,1.8	X3.2MM	RM698	2001-000290	R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X	3.2MM
RIVI373	2001-000812	2 R-CARBON;5.6KUHIVI,5%,1/8W,AA,1P,1.		RIVI699	2001-000290	R-CARBUN; IUKUHIVI, 5%, 1/8W, AA, 1P, 1.8X
RIVI377 PM378	2001-000273	3 R-CARBON; 100KUHIVI, 5%, 1/8VV, AA, 1P, 1 5 P.CARBON: 8200HM/5% 1/8W/ AA TD1 8	.883.21VIIVI 193.21011VI	SIVIOU I SM602	AA91-00319. AA01_60310	AASST-HULDER,SEINSUR;-,ABS,HB,BLK,TR L A ASSV HOLDER SENSOR: - ARS HR REK TR L	LED, I S-DECK
RM601	2001-000554	R-CARBON 2700HM 5% 1/8W AA TP1 8	X3 2MM	SWM610	AA34-20001	A SWITCH-MODE 1 25x14 6x29 8mm BK DC5	5V
RM602	2001-000522	2 R-CARBON:22KOHM.5%.1/8W.AA.TP.1.8	3X3.2MM	SWM611	AA34-40001	ASWITCH-REC.: 1EA.37.5x14.4mm.BK.DC5V
RM603	2001-000864	R-CARBON;56KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	SWM612	3404-000244	SWITCH-TACT;15V,20mA,90-170gf,7.5x7mr	m,SPST
RM604	2001-000660	R-CARBON;33KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	VRM601	2103-000669	VR-SEMI;10Kohm,25%,1/5W,TOP
RM605	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8	(3.2MM	XTM301	2801-000277	CRYSTAL-UNIT;4.433619MHz,8ppm,28-AA	M,S,100o
RM606	2001-000864	R-CARBON;56KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	XTM601	2801-003750	CRYSTAL-UNIT;8MHZ,30PPM,28-AAA,22PF	F,800HM,TP
RM607	2001-000864	4 R-CARBON;56KOHM,5%,1/8W,AA, IP,1.8 D CARBON; 1/CULM, 5%, 1/8W,AA, TP,1.8	3X3.2MM	X1M602	2801-003224	CRYSTAL-UNIT;32. /68KHz,20ppm,28-AAY,1	12.5pF,
RIVI608	2001-000429	7 R-CARBON; IKUHIVI, 5%, 1/8W, AA, 1P, 1.8; D. CARBON; IKUHIVI, 5%, 1/8W, AA, TR1 8;		ZDIVITUT	0403-000355	DIODE-ZENER;UZ5.1858,5.17,4.97-5.187,50	JOMVV
RIVI009 RM610	2001-000429	7 R-CARBOIN; I KUHIVI, 5%, I / 8VV, AA, I P, I.8, R-CARBON-68KOHM 5%, 1/8W/ ΔΔ TP1 5		ZDIVITUZ	0403-000503	DIODE-ZEINER;IVI1Z9.1B,9.1V,8.57-9.01V,50	UTTIVV,
RM611	2001-000832	R-CARBON:5100HM.5%.1/8W.AA.TP.1.8	X3.2MM
RM612	2001-000290	) R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM			ASSI-FUD,IF
RM613	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8	(3.2MM				- 10
RM614	2001-000290	R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	*	AA95-00090	AASSY-PCB,IF;-,1B20A5/1X20A5,C15A,PAL-I	B/G,-,-
RM615	2001-000290	) R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	C101	2202 002027		VEV TD 2 2v2
RM616	2001-000660	) R-CARBON;33KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	C101	2202-002037	C-CERAIVIIC, IVIEC-AXIAE, 10011F, 60-20 %, 50V	7,100,17,2.285.
RM618	2001-000786	R-CARBON;4/KOHM,5%,1/8W,AA,TP,1.8		C102	2202-000797	C-CERAMIC MIC-AXIAI 10NE 30% 16V Y55	S TP 3 5X1 9MM -
RIVIO24	2001-000429			C104	2401-000302	2 C-AL;100uF,20%,25V,GP,TP,6.3x11,5	5,11,010,111,111,1
RM628	2001-00042	R-CARBON, TROHM, 5%, 178W, AA, TF, 1.8 R-CARBON: 1KOHM 5% 1/8W AA TP1 8	(3.2MM	C106	2301-000224	C-FILM,PEF;22nF,5%,50V,TP,7.4x3.9x13mm,	,5m
RM629	2001-000429	R-CARBON:1KOHM,5%,1/8W,AA,TP.1.8	(3.2MM	C108	2401-001333	C-AL;470nF,20%,50V,GP,TP,5x11,5
RM630	2003-002129	R-METAL OXIDE(S);3.9ohm,5%,2W,AF,TF	3.9x10mm	C109	2401-000660	C-AL;2.2uF,20%,50V,GP,TP,5x11,5
RM634	2001-000734	R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.	8X3.2MM	C110	2401-000962	2 C-AL;22uF,20%,50V,GP,TP,5x11,5	-
RM635	2001-000734	R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.	8X3.2MM	C112	2301-000175	C-FILIVI, PEF; 150F, 5%, 50V, 1P, 7. 1X3.5X13MM, C. FILINI, MDEF, 100p, F897, 421/TD 7, 594, 095, 0	,5M
RM636	2001-000734	R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.	8X3.2MM	CN02	2303-000003	C-FILIVI, WIPEF, TOUTIF, 576, 05 V, TP, 7.5X4.0X5.0 CONINECTOR-HEADER-NIOWALL 10P1R 2 5	mm ΔNGLE SN
RM638	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,1P,1.8		F101	2903-000184	FILTER-CERAMIC:BP5 5MHz +-60KHz 6dB -	- TP-
RIVI039 RM640	2001-000290	J R-CARBON; IUKOHIVI, 5%, 1/8VV, AA, 1P, 1.3 P.CAPRONI-22KOHM 5%, 1/8W/ AA, TP1 8		F103	2903-000181	FILTER-CERAMIC;TR,5.5MHz,-,-,TP,TPS5.5	MB-TF
RM641	2001-000322	R-CARBON(S):1800HM 5% 1/2W AA TP	2 4X6 4MM	IC101	1204-001435	IC-IF SYSTEM;LA7565B,DIP,24P,300MIL,PLA	ASTIC
RM642	2001-000633	3 R-CARBON: 30KOHM, 5%, 1/8W, AA, TP, 1.8	3X3.2MM	L101	2701-000215	INDUCTOR-AXIAL;8.2uH,10%,2.5x3.4mm
RM643	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8	(3.2MM	L102	AA26-10006	L TRANS-IF;-,7MG,VIF,-,7mm,39pF,38.9MHz,5	S
RM644	2001-000010	R-CARBON;68KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	L103	2701-000171	INDUCTOR-AXIAL;330nH,10%,2.5x3.4mm
RM647	2001-000429	P R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8	(3.2MM	Q101 D101	0501-000389	IR-SMALL SIGNAL;KSU815,NPN,4000W,1 D CADDON: 47KOLINA EQ: 1/0W/AA TD1 8X	0-92, IP, I20-
RM648	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8	(3.2MM	RIUI P102	2001-000780	R-CARBUN;4/KUHIVI,5%,1/8VV,AA,TP,1.8A, D CARBON:2000UN/5%,1/8VV,AA,TD1.8V;	3.2IVIIVI 2.2NANA
RM649	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,1P,1.8		R102	2001-000761	R-CARBON-4300HM 5% 1/8W AA TP1 8X	3.2MM
RIVI050 DM651	2001-000429	7 R-CARBON; IKUHIVI, 5%, I/8W, AA, IP, I.8, D CADDONI-12/04/15%, 1/8W, AA, TD1, 9%		R105	2001-000281	R-CARBON:1000HM.5%.1/8W.AA.TP.1.8X	3.2MM
RM652	2001-00042	R-CARBON, TROHM, 5%, 178W, AA, TF, 1.8 R-CARBON: 1KOHM 5% 1/8W AA TP1 8	(3.2MM	R107	2001-000563	R-CARBON;27KOHM,5%,1/8W,AA,TP,1.8X	3.2MM
RM653	2001-000429	R CARBON 1KOHM, 5%, 1/8W, AA TP1 8	(3.2MM	R109	2001-000009	R-CARBON;20KOHM,5%,1/8W,AA,TP,1.8X	3.2MM
RM654	2001-000005	5 R-CARBON;3900HM,5%,1/8W,AA,TP,1.8	X3.2MM	R113	2001-000411	R-CARBON;18KOHM,5%,1/8W,AA,TP,1.8X	3.2MM
RM655	2001-000005	5 R-CARBON; 3900HM, 5%, 1/8W, AA, TP, 1.8	X3.2MM	R115	2001-000812	R-CARBON;5.6KOHM,5%,1/8W,AA,TP,1.8X	(3.2MM
RM657	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8	(3.2MM	R120	2001-000837	R-CARBON;51KOHM,5%,1/8W,AA,TP,1.8X	3.2MM
RM660	2001-000522	2 R-CARBON;22KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	RIZI D127	2001-000679	7 R-CARBUN;36KUHIVI,5%,1/8W,AA,1P,1.8X, D CARBON;3000UN4 E9/ 1/0W/AA TD1 8Y/
RM661	2001-000554	R-CARBON;2700HM,5%,1/8W,AA,TP,1.8	X3.2MM	R127 P128	2001-000003	P.CARDUN, 3900HIVI, 3%, 1/6W, AA, 1P, 1.6A, P.CAPRONI 12KOHM 5%, 1/8W/ AA TD1 8Y	3.211111
RIV1663	2001-000429	K-CARBUN; IKUHM, 5%, 1/8W, AA, 1P, 1.8		R129	2001-0000331	R-CARBON:15KOHM.5%.1/8W AA TP1 8X	3.2MM
	2001-000429	K-CARBUN, IKUHIVI, 5%, I/8W, AA, IP, T.8, D. CARBON-1KOHM 5%, 1/9W, AA, TP 1, 9%	(3.21VIIVI (3.2NANA	SFK01	2904-001070	FILTER-SAW AV;38.9MHz.SIP5K.TP.14.5dB	,PAL-B/
RM666	2001-000429	R-CARBON-1KOHM 5% 1/8W/ΔΔ ΤΡ1 8 ³	(3.2MM
RM667	2001-000421	R-CARBON:1000HM.5%.1/8W.AA TP1 8	X3.2MM			ASSY-PCB CONTROL
RM668	2001-00028	I R-CARBON;1000HM,5%,1/8W,AA,TP.1.8	X3.2MM
RM669	2001-000539	R-CARBON;24KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	*	0 5 0000 C
RM670	2001-000009	R-CARBON;20KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM		nn 7J-00092	14/20,ALL
RM671	2001-000331	R-CARBON;12KOHM,5%,1/8W,AA,TP,1.8	3X3.2MM	CM701	2202-002037	C-CERAMIC,MLC-AXIAL:100nF.80-20%.50	/,Y5V,TP,2.2x3.
RM674	2001-000429	R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8	(3.2MM	CM702	2401-002291	C-AL;47uF,20%,16V,GP,TP,6.3x5,5
	2001-000429	R-CARDUN; INUHIVI,5%, 1/8W,AA, 1P,1.8 D CADDON: 12/01/269/ 1/90/2004 T0 1 00 D CADDON: 12/01/269/ 1/90/2004 T0 1 00	\3.2IVIIVI /2.2N/N/	CN701	AA39-20144	BLEAD CONNECTOR-ASSY;-,35023-0013,510	004-1300,13P,300
RM680	2001-000429	2 Π-ΟΑΝΒΟΝ, ΓΚΟΠΙΝΙ, 3 %, Γ/ΟΨΥ, ΑΑ, ΓΥ, Γ.δ. 2 R-CARBON·1ΚΟΗΜ 5% 1/Ջ\Λ/ ΔΔ ΤΡ1 Ջ\	(3.2MM	DM701	0401-000005	DIODE-SWITCHING;1N4148,75V,200MA,D0	0-35,TP
RM681	2001-00042	R-CARBON 1KOHM 5% 1/8W/ AA TP1 8	(3.21/11/1	DZ701	0403-000296	DIODE-ZENER;MTZ5.6B,5.6V,5.45-5.73V,50	.0mW,

Page 81

Loc. No.	Code No.	Description ; Specification R	emark Loc.	No.	Со

DZ702	0403-0002	296 DIODE-ZENER;MTZ5.6B,5.6V,5.45-5.73V,500mW,	C	Y702	2
DZ703	0403-0002	296 DIODE-ZENER;MTZ5.6B,5.6V,5.45-5.73V,500mW,	J	A01	3
DZ704	0403-0002	296 DIODE-ZENER;MTZ5.6B,5.6V,5.45-5.73V,500mW,	J	A02	3
DZ705	0403-0002	296 DIODE-ZENER;MTZ5.6B,5.6V,5.45-5.73V,500mW,	J	A03	3
LDM701	0601-0003	385 LED;ROUND,RED,3mm,700nm	L	Y701	2
LDM702	0601-0003	385 LED;ROUND,RED,3mm,700nm	L	Y702	2
LDM703	0601-0003	385 LED;ROUND,RED,3mm,700nm	F	Y701	2
QM701	0504-000	118 TR-DIGITAL;KSR1003,NPN,300MW,22K/22K,TO-92,	TP F	Y702	2
QM702	0504-000	118 TR-DIGITAL;KSR1003,NPN,300MW,22K/22K,TO-92,	TP
QM703	0504-000	118 TR-DIGITAL;KSR1003,NPN,300MW,22K/22K,TO-92,	TP
REM701	AA59-600	02B MODULE-REMOCON;-, ORC-50HF, 38KHz, 940mm, ME	SH,H,
RM701	2001-0008	357 R-CARBON;5600HM,5%,1/8W,AA,TP,1.8X3.2MM
RM702	2001-0008	357 R-CARBON;5600HM,5%,1/8W,AA,TP,1.8X3.2MM			3
RM703	2001-0008	357 R-CARBON;5600HM,5%,1/8W,AA,TP,1.8X3.2MM			A
RM704	2001-000	734 R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2MM
RM705	2001-0004	429 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
RM706	2001-0004	429 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM
RM707	2001-0004	429 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM	A
SWM701	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWM702	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWM703	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWM704	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWM705	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST	Â
SWM706	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWM707	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWM708	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWM709	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST
SWM710	3404-0010	006 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST	*		A
		o

ASSY-PCB,MASTER

* AA95-00093AASSY-PCB.MASTER:DP.-.C15A.PAL.-.ALL

3403-000179 SWITCH-PUSH;250V;5A,DPST,-,JPW-2104B 6001-000057 SCREW-MACHINE;RH,+,M3,L6,ZPC(BLK),SWRCH18A,F AA39-20041B LEAD-CONNECTOR,ASSY;-,YFH800-02,S,2P,300,1617#22 AA61-10320A BRACKET-MASTER:-,T3350,SECC,T1.0,-,-

ASSY-PCB,CRT

*	AA95-20011AASSY-PCB,CRT;-,C15A,20,21,EC,-


	C502	2301-000213 C-FILM,PEF;220nF,5%,250V,TP,21.5x11,7.5
	C503	2201-002063 C-CERAMIC,DISC;10nF,+80-20%,3KV,Y5V,TP,16x5,7
	C504	2401-001232 C-AL;4.7uF,20%,250V,GP,TP,10x12.5,5
	C506	2401-000430 C-AL;10uF,20%,250V,GP,TP,10x16mm,5m
	C510	2201-000471 C-CERAMIC,DISC;.33NF,10%,50V,Y5P,TP,4X3MM,5
	CN503A	AA39-20030B LEAD-CONNECTOR, ASSY;-, 67096-008, S, 8P, 400, 1007#26
	CN503B	3711-002647 CONNECTOR-HEADER;BOX,8P,1R,2.5mm,STRAIGHT,SN
	D501	0402-000216 DIODE-RECTIFIER;ERC24-06,600V,1.0A,DO-204
	D502	0402-000546 DIODE-RECTIFIER;TVR10G,400V,1.0A,DO-41,TP
	D503	0402-000546 DIODE-RECTIFIER;TVR10G,400V,1.0A,DO-41,TP
	D504	0402-000546 DIODE-RECTIFIER;TVR10G,400V,1.0A,DO-41,TP
	DZ501	0403-000563 DIODE-ZENER;MTZ9.1B,9.1V,8.57-9.01V,500mW,
	DZ502	0403-000563 DIODE-ZENER;MTZ9.1B,9.1V,8.57-9.01V,500mW,
	DZ503	0403-000563 DIODE-ZENER;MTZ9.1B,9.1V,8.57-9.01V,500mW,
	DZ504	0403-000563 DIODE-ZENER;MTZ9.1B,9.1V,8.57-9.01V,500mW,
	GT502A	AA39-20010DLEAD-CONNECTOR, ASSY;-, YFH800-01, S, 1P, 400, 1617#22
	IC501	1201-001159 IC-VIDEO AMP;6107,ZIP,9P,300MIL,SINGLE,-,PL
	R501H	2002-001009 R-COMPOSITION;2.7Kohm,10%,1/2W,AA,TP,3.7X9.0
	R502H	2002-001009 R-COMPOSITION;2.7Kohm,10%,1/2W,AA,TP,3.7X9.0
	R503	2002-001009 R-COMPOSITION;2.7Kohm,10%,1/2W,AA,TP,3.7X9.0
	R504	2001-001062 R-CARBON(S);10MOHM,5%,1/2W,AA,TP,2.4X6.4MM
	R505	2008-001015 R-FUSIBLE(S);1.5ohm,5%,2W,AF,TP,3.9x10mm
	R510	2001-000281 R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2MM
	R511	2001-000281 R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2MM
	R512	2001-000281 R-CARBON;1000HM,5%,1/8W,AA,TP,1.8X3.2MM
A	V999	3704-001105 SOCKET-CRT;11P,20PI,26.5PI,NI,-

ASSY-PCB,A/V

* AA95-40012B ASSY-PCB.A/V:DP.TF502.C15A.PAL.230V.14-21'

CNC701A AA39-20069DLEAD-CONNECTOR,ASSY;-,YBNH025-05,67096-005,5P,300, CNC701B AA39-20070C LEAD-CONNECTOR,ASSY;-,YBNH025-07,67096-007,7P,400,



CY702	2202-000121 C-CERAMIC,MLC-AXIAL;100pF,10%,50V,Y	5P,TP,1.9x3.5,-
JA01	3722-001343 JACK-RCA;1P,3.4MM,NI,WHT,-
JA02	3722-001342 JACK-RCA;1P,3.4MM,NI,YEL,-
JA03	3722-000145 JACK-PHONE;1P,3.6mm,MBAG,BLK,-
LY701	2701-000114 INDUCTOR-AXIAL;10uH,10%,2.5x3.4mm
LY702	2701-000114 INDUCTOR-AXIAL;10uH,10%,2.5x3.4mm
RY701	2001-001187 R-CARBON(S);750HM,5%,1/2W,AA,TP,2.4	X6.4MM
DV702	2001 001107 D CADDONICS-7EOUNAE0/ 1/20/ AA TD2/	V4 ANANA

ASSY-SPEAKER

3001-001037 SPEAKER;5W,8ohm,89dB,180Hz AA39-20501C LEAD CONNECTOR-ASSY- 67096-003.REC.3(2)P.700mm.10

ASSY-CRT

CRT-COLOR ; LOCAL (SESA)

ASSY-POWER,CORD

POWER-CORD; LOACL (SESA)

REMOCON

AA59-00006J REMOCON;-,TM48,SSOM728EU,43,L/GRAY,SS,EX,-,-

ASSY-ACCESSORY

AA68-00128A MANUAL-USERS ; LOCAL (SESA)

Page 82

9. Block Diagrams

9-1 C15A Video Block Diagram

9-1-1 Notes

The TV's 1st and 2nd tuners (and VCR module) are "multi-system." compatible: IC201 (TDA8842/8841) is the video, chroma, and deflection (VCD) IC .

9-1-1(A) TAPE PLAYBACK (REGARDLESS OF ORIGINAL RECORDING SYSTEM)

If the output PB signal of micom pin 6 is high, the PB signal outputs from module deck 2, passes through IC 702 pins 2 and 3 and out to another VCR. The output signal of IC701 pin 1 (pin 15) outputs from IC201 pin 17.

9-1-1(B) VIEWING NORMAL CHANNEL WHILE RECORDING A SCRAMBLED CHANNEL:

The output CVBS (Composite Video Signal) of the 2nd IF outputs to IC702pin 3 when the micom's pin 7 V/T/H (VCR tuner high) is high . The decoded signal goes to IC701 pin 2, where it is fed to IC 701 pin 4 (high output of micom's' pin 8— AV/Tuner), and out to VCR pin 4 (module deck) for recording.

9-1-1(C) VIEWING A SCRAMBLED CHANNEL WHILE RECORDING AN UNSCRAMBLED CHANNEL.

The output CVBS of the 2nd IF is fed from IC701 pin 5 to IC701 pin 4 (low output of micom pin 8—AV/tuner). Then it goes to the module deck pin 4 for recording.

The scrambled signal (CVBS) is fed to IC702 pin 1 through the 1st IF, and then to IC702 pin 3 (micom's pin 7, V/T/H registers low). Then it goes to the decoder input. The descrambled signal goes to IC701 pins 2 and 15 (PH high output of micom's pin 6), and then to IC201 pin 17, where it outputs as RGB.

9-1-1(D) SYNCHRONOUS RECORDING:

The viewer sees the signal from the 1st tuner , while the signal from the second tuner is recorded. Audio processing for the French system type is shown in the table.

Page 83

Micom Pin Function

PIN NO.	PIN NAME	FUNCTION
6	РВ Н	High Output : Playback signal is monitored. The PB signal is output at scart.
7	V/T/H	High Output : The second tuner signal is output at scart.
8	AV/TUNER	High Output : AV signal is recorded. Low output : TUNER signal is recorded.
56, 57	S-L H FRA H	Port S-L H FRA H PAL/SEC L L FRANCE-L L H FRANCE-L' H L

23,24	SDA,SCL	Extra control signals are all controlled by the I ² C bus. Select INT/EXT FRENCH system modulation

Page 84

Micom Pin Function


PIN NO.	PIN NAME	FUNCTION
6	РВ Н	High output : PB audio is monitored. The PB audio is output at scart.
7	V/T/H	High output : The second tuner audio is output at a scart.
8	AV/TUNER	High output : AV audio is recorded. Low output : TUNER audio is recorded.
60	S-L CTL	1 1.8 ~ 2.6V : In TV FM Mode, connect pin 7 to A and pin 9 to C.
	a:S-L(AM)	(2) 4.1 ~ 4.9V : In TV AM Mode, connect pin 7 to A and pin 9 to A.
	б: B/G (FM)	36.4 ~ 7.2V : In AV-AM Mode, connect pin 7 to B and pin 9 to A.
	C:EXT	④ More than 7.3V : In AV-FM Mode, connect pin 7 to B and pin 9 to C.
53,54	SDA, SCL	S Port B/G D/K
	DG/TL	AUTO L L
	DK/L	BG L H
		DK H L
		I L H

Page 85

11. Wiring Diagram

11-1 C15A Wiring Diagram

Page 86

11-2 C15A Wiring Diagram

Page 87

12. Schematic Diagrams

RED _____ PB Y PROCESS BLUE _____ REC Y PROCESS

Page 88

12-2 VCR (SYSTEM BLOCK)

Page 89

12-3 VCR (A/V BLOCK)

Page 90

12-4 VCR (POWER BLOCK)

Page 91

Page 92

12-6 TV (2/4)

Page 93

RED — POWER LINE BLUE — SIGNAL LINE

Page 94

12-8 TV (4/4)

Page 95

12-10 CRT

24	25	26
30000000 10000000000 100000000000 1000000000000 1000000000000000000000000000000000000	Stopped 4 Description Sector	3 1000/01/10 3/2011/10 ODE:001/01 ODE:001/01 J

RED — POWER LINE BLUE — SIGNAL LINE

Page 96

Schematic Diagrams

12-12 TTX

12-13 CONTROL

12-14 MASTER

12-15 FRONT-A/V

RED — POWER LINE BLUE — SIGNAL LINE

Page 97

12-16 Voltages (VTR)

	M301	]											ICM601											ICM	901			V1602
	PLAY	REC	STOP		PLAY	REC	STOP		PLAY	REC	STOP		ΡΙ ΔΥ	REC	STOP		ΡΙΑΥ	REC	STOP		PLAY	REC	STOP		DIAV	DEC	STUD	DI
1	2.5	2.5	2.5	34	1.8	1.8	1.8	67	4	4	4	1	5	5	5	34	0	0	0	67	5	0	0	1	rlAi	NLC 0.0	JIUF	PU	AY REG	- SIO
2	2.5	2.5	2.5	35	3.5	3.5	3.5	68	0	0	0	2	0	0	0	35	0	0	0	68	0	0	0		4	0.8	0.8	0	0	0
3	2.5	2.5	2.5	36	1.8	1.8	2	69	0.7	0.7	0.7	3	5	5	5	36	0	0	0	69	5	5	5	2	2	2	2	2 0.	4 0.4	4 0.4
4	2.5	2.5	2.5	37	4.9	4.9	5	70	2	2	2	4	5	5	5	37	0	0	0	70	5	5	5	3	4	4	4	\| 1	1	1
5	2.5	2.5	0	38	1.8	1.8	1.8	71	2.5	2.5	2.5	5	5	5	5	38	5	5	5	71	0	0	0	4	3.5	3.5	3.5	0	0	0
6	2.5	2.5	2.5	39	4	4	4	72	0.3	2.5	3	6	5	5	5	39	5	5	5	72	1.8	1.8	1.8	5	0	0	0	3	5 31	5 35
	2.5	2.5	2.5	40	5	5	5	73	2.5	2.5	3.5	7	5	5	5	40	0	0	0	73	0	0	0	6	0	0	0	, J.		5 0.0
8	0	0	0	41	2.7	2.7	3	/4	2	0	2	8	5	5	5	41	5	5	5	74	0	0	0	7	0	0	0	) J.	0 3.3	3.0
9	1.4	1.4		42	3 10	3 10	3.Z	75	2 25	25	0 25	9	5	5	0	42	5	5	5	75	0	0	0	/	0	0	0	9	9	9
10	1.0	1.0	2	43	1.9	1.9	2	70	2.5	2.5	2.5	10	5	5	0	43	5	5	5	76	0.7	0.7	0.7	8	2.5	2.5	2.5	8 9	9	9
12	5	) 2	2.5	44	4.5	4.5	2	78	2.5	2.5	0	11	0	0	0	44	5	5	5	77	0.7	0.7	0.7	9	2.5	2.5	2.5	1 \|	1	1
12	15	15	2.5	45	1.0	1.0	15	70	2.5	2.5	25	12	0	0	0	45	0	0	0	78	0	0	0	10	2.5	2.5	2.5	0 0.	5 0.!	5 0.5
14	1.5	1.5	16	40	2	2	9	80	2.5	5	2.5	13	0	0	0	46	0	0	0	79	0	0	0	11	2.5	2.5	2.5
15	2.2	2.2	2.2	48	2.3	2.3	2.2	81	0	0	0	14	5	5	5	4/	0	0	0	80	0	0	0	12	4.5	4.5	4.5
16	5	5	5	49	1.2	1.2	1	82	1.8	4.1	1	15	3.5	3.5	3.5	48	5	5	5	01	0	0	0	13	2.5	25	25
17	3	0	0	50	0	0	0	83	0	0	0	10	4.5	4.5	4.5	49 50	5	5	5	02	4	0	0	10	2.0	4.7	4.5
18	1.8	2.1	2.2	51	1.9	1.9	0	84	1.8	4.1	1	1/	15	15	15	51	5	5	5	8/	0	0	0	14	2.0	4.7	4.0
19	2.1	2.1	2.2	52	2.4	2.4	2.5	85	1.8	4.1	1	10	4.5	4.5	4.5	52	5	5	5	85	2.5	5	2.5	15	3	2.5	2.5
20	2.8	2.8	3.2	53	0	0	0	86	0	0	0	20	5.5	5	5	53	5	5	5	86	2.5	5	2.5	16	5	1	1
21	2.1	2.1	2.5	54	2.4	2.4	2.5	87	5	5	5	21	0	0	0	54	5	5	5	87	2.5	2.5	2.5	17	2.5	2.5	2.5
22	0	0	0	55	5	5	5	88	1.8	4.1	2	22	0	0	0	55	0	5	0	88	2.5	2.5	2.5	18	2	2	2
23	5	5	5	56	3.5	3.5	0	89	0	0	0	23	0	0	0	56	0	0	0	89	2.5	2.5	2.5	19	2.5	2.5	2.5
24	5	5	5	57	3.4	3.4	3.5	90	1.8	4.1	2	24	5	5	0	57	0	0	0	90	2.5	2.5	2.5	20	2.5	2.5	2.5
25	1.8	1.8	2.8	58	5	5	5	91	1.8	4.1	2	25	5	5	0	58	5	5	5	91	0	0	0	20	2.0	2.5	2.5
26	0.8	0	1	59	3.4	3.4	3.5	92	4	1.6	0	26	0	0	0	59	5	5	5	92	5	5	5	21	2.0	2.0	2.0
27	4.1	4.1	4.1	60	3.5	3.5	3.5	93	4	4.0	0	27	5	5	5	60	5	5	5	93	5	5	5	22	5	5	5
28	4.1	4.1	4.1	61	3.3	3.3	3.5	94	0.5	0.7	0	28	5	5	5	61	5	5	5	94	0	5	0	23	3	3	3
29	0.8	0.8	3	62	3.5	3.5	3.5	95	0	0	0	29	5	5	0	62	0	0	0	95	0	0	0	24	3	3	3
30	2.1	0		63	4	4	0	96	2.5	2.5	2.5	30	0	0	0	63	0	0	0	96	5	5	5	25	4.1	3	3
21	2.1 1.0	2.1 1.0	3.5	65	2.2	2.2	0	9/	0 25	U 2.5	U 25	31	0	0	0	64	5	5	5	97	5	5	5	26	5	0	0
22	1.0 2	1.0 2	15	CO 44	2.4	2.4	2.2	90	2.0 5	2.0 // 2	۲.۵ ۲	32	5	5	5	65	0	0	0	98	5	5	0	20	11	// 1	11
	Z	Z	1.0	00	2.0	2.0	J	100	25	4.J	25	33	0	0	0	66	0	5	0	99	5	5	0	21	4.1	1.1	1.1
									Z.J	Z.J	Z.J									100	5	5	5	28	3.1	3.1	3. I

Page 98

12-17 Voltages (TV)

Q801 :	KA3S0680R	F	Units : Volts	TIC01 :	SAA5254	Units : Volts	IC	901 : CXP85	340A-329S
PIN NO	PIN NAME	ST AND-B	Y POWER ON	PIN NO	PIN NAN	NE VOLTAGES(V)						Units : Volts
1	DAR.IN	299	290	1	VDD	5.0	PIN NO	PIN NAME	VOLTAGES(V)	PIN NO	PIN NAME	VOLTAGES(V)
2	GND	-	-	2	OSC OU	T 2.4	1	H-sync	1.3	37	V.NURE	-
3	VCC	19.5	20.3	3	OSC IN	4.0	2	V-sync	-	38	S.MUTE	5.1
4	VFB	0.2	1.3	4~5	-	-	3	TV POWER	5.2	39	1T/AGC	4.6
5	SYNC	0.8	6.7	6	REF+	5.0	4	VPS POWER	-	40	2T AFT	2.4
				7	BLACK	2.1	5	STBY-REC	-	41	1T AFT	-
				8	CVBS	2.5	6	PB-H	-	42	SCART ID	-
IC801	: PC123Y		Units : Volts	9	IREF	2.5	7	V/T/H	-	43	BUS STOP	5.2
PIN NO	STAN	D-BY	POWER	10	VDD	5.0	8	AV/TUNER	-	44	P.OFF DET	5.5
1	16	5.5	16.7	11~17	-	-	9	2nd NT H	5.2	45	XLC	3.1
2	15	5.4	15.7	18	RGB RE	F 5.0	10	1st NT H	5.2	46	EXLC	3.1
3	GN	ND	GND	19	BLAN	1.6	11	D-coil	-	47	OSD R	-
4	0	.2	1.3	20	VSS	-	12~22	Not used	5.1	48	OSD G	-
				21	COR	5.0	23	SCL	4.8	49	OSD B	-
IC501 ·	TDA61070		Units · Volts	22~23	-	-	24	SDA	4.8	50	N.C	-
	10/10/10/10			24	SCL	4.8	25	Not used	5.2	51	F/B	-
PIN NO	PIN I	NAME	VOLTAGES(V)	25	SDA	4.8	26	REMOCON	4.5	52	H/T	-
1	B-	IN	2.4	26~40	-	No.Used	27	VCR RESET	-	53	BG/I L	-
2	R-	IN	2.4				28	TV CS	4.8	54	D/K L	-
3	G	-IN	2.5	IC902 : 2	24C08,24C04		29	TV SI	4.1	55	1T S-L H	-
4	G	ND	-				30	TV SO	2.6	56	S-L H	-
5	lo	om	5.4	PIN NU		VULTAGES(V)	31	TV CLK	5.1	57	FRA H	-
6	V	dd	166	I~4	GND	-	32	Vss	-	58	N.C	-
7	G-(	TUC	90~115	5	SDA	4.8	33	DAVN	5.2	59	LNA	4.4
8	R-C	DUT	93~118	0	SUL	4.8	34	Xtal	2.5	60	S-L CTL	-
9	B-C	DUT	97~119	0		-	35	EXtal	2.4	61~62	GND	-
				0	VDD	5.2	36	RESET	5.2	63~64	VDD	5.1
IC301	: TDA8356		Units : Volts	IC601 :	TDA7267	Units : Volts
PIN NO	PIN N	AME	VOLTAGES(V)	PIN NO	PIN NAME	VOLTAGES(V)
1	VD-IN	PUT	2.2	1	VS	1.6
2	VD+IN	IPUT	2.2	2	OUT	8.5
3	VCO		16.9	3	SVR	8.7
4	OUTF	TUY	8.2	4	IN	0.8
5	GN	D	-	5	N.C	-
6	VFE	3	41.5	6	S-GND	-
7	OU	т \|	8.5	7~8	N.C	-
8	VC	)	-	9~16	P-GND
9	VI		8.2		. 5115

Page 99

12-18 Voltages (TV)

TICO	1 : SA	A5254		Units : V	olts
PI	N NO	PIN	NAME	VOLTAGE	S(V)
	1	V	DD	5.0
	2	OSC	COUT	2.4
	3	OS	C IN	4.0
	4~5		-	-
	6	RI	EF+	5.0
	7	BL/	ACK	2.1
	8	C\	/BS	2.5
	9	IF	REF	2.5
	10	V	DD	5.0
1	1~17		-	-
	18	RGB	REF	5.0
	19	BL	AN	1.6
	20	V	55	-
	21	U	UK	5.0
2	22~23	c	-	- 1.0
	24	S		4.0
	25	5	-	No Lis	ed
				1		Units : Volts
LOC	IC101*	IC101*	IC 701	IV 702	ICL 01*	ICP01*
IC PIN NO	TDA9818 2T-IF(F)	LA7565B 2T-IF(W)	TC4053BP	TC4052BP	STV8225	SDA5650
1	3.3	2.0	-	1.6	4.2	-
2	3.3	2.2	-	0.5	3.2	4.8
3	-	7.4	-	1.6	-	4.8
4	2.0	8.0	1.1	-	0.6	-
5	2.1	8.9	1.1	2.2	4.3	0.4
6	3.9	3.8	-	-	3.5	5.2
7	1.7	3.2	-	-	4.3	-
8	2.4	2.7	-	-	6.3	-
9	2.3	3.7	0.8	0.8	4.3	2.6
10	2.3	2.7	0.8	0.8	3.5	2.6
11	1.6	8.3	0.8	-	4.3	2.6
12	2.0	8.3	2.2	4.0	9.0	1.5
13	2.7	0.3	-	3.4	4.3	1.5
14	4.2	7.9	2.1	2.2	4.3	5.2
15	1.4	-	-	0.4	/
10	1.9	-	8.9	8.9
1/	0.4	2.9	\| /
10	2.0	3.4	\| /
20	2.0		\| /			\| /
20	4.9	- 17	\| /		\| /	\| /
21	0.8	2.4	\| /		\| /	\| /
22	3.2	33	\| /	\| /	\| /	\| /
23	3.2	3.3	\|/	\|/	\|/	\|/

	C201 : TDA8842/8841
		Units : Volts
PIN NO	PIN NAME	VOLTAGES(V)
1	SOUND IF INPUT	-
2	EXT.AUDIO INPUT	3.6
3	N.C	-
4	N.C	-
5	PLL LOOPFILTER	2.4
6	IF VIDEO OUTPUT	3.2
7	SCL	4.8
8	SDA	4.8
9	BANDGAP DECOUPLING	6.6
10	CHROMA INPUT	-
11	Y/CVBS INPUT	3.3
12	MAIN POSITIVE SUPPLY	8.0
13	INT.CVBS INPUT	3.9
14	GND	-
15	AUDIO OUT	3.0
16	SECAM DECOUPLING	-
17	EXT.CVBS INPUT	3.3
18	BLACK CURRENT INPUT	5.0
19	BLUE OUTPUT	3.0
20	GREEN OUTPUT	3.2
21	RED OUTPUT	3.2
22	V-GUARD INP / BEAM CUR.LIMITTER	2.0
23	RED INPUT	3.4
24	GREEN INTPUT	3.4
25	BLUE INTPUT	3.4
26	RGB INSERTION SWITCH INP	0.1
27	LUMINANCE INPUT	2.6
28	LUMINANCE OUTPUT	2.6
29	B-Y OUTPUT	-
30	R-Y OUTPUT	-

PIN NO	PIN NAME	VOLTAGES(V)
31	B-Y OUTPUT
32	R-Y OUTPUT	-
33	SUBCARRIER OUTPUT	-
34	X-TAL(3.58)	2.4
35	X-TAL(4.43/3.58)	2.4
36	LOOPFILTER BURST PHASE DET	4.9
37	POSITIVE SUPPLY	8.0
38	CVBS OUTPUT	2.7
39	DECDIG	4.9
40	HOR OUTPUT	0.3
41	SANDCASTLE OUTP/FLY-BACK INP	0.5
42	PHI2 FILTER / FLASHPROT	3.2
43	PHI1 FILTER	3.9
44	GND	-
45	EAST-WEST DRIVE/AVL OUTPUT	-
46	VERT.DRIVE POS	2.2
47	VERT.DRIVE NEG	2.2
48	IF INPUT	4.5
49	IF INPUT	4.5
50	EHT/OVERVOLTAGE PROTECTION INP	2.1
51	VERT.SAWTOOTH CAPACITOR	3.7
52	REFERENCE CURRENT INPUT	3.8
53	AGC DECOUPLING CAPACITOR	4.2
54	TUNER AGC INPUT	4.4
55	AUDIO DEEMPHASSIS	2.8
56	DECOUPLING SOUND DEMODULATOR	2.4

SAMSUNG TB14C52, TB14C52S/XEC, TB14C52XAA, TB14C52XEC, TB14C52XEG Service manual & schematics

Television Video Cassette Recorder

SERVICE Manual

Television Video Cassette Recorder

CONTENTS

2. Specifications

3. Disassembly and Reassembly

3-1 Disassembly

3-1-1 Back Cover Removal

3-1-2 Main Assembly Removal

3-1-3 Monitor Frame Removal

3-1-4 Deck Assembly Removal

3-1-5 Main Assembly Removal

3-1-6 Top Cabinet Removal

3-1-8 Top Cabinet Removal

4. Alignments and Adjustments (Mechanical)

4-1 Deck Parts Locations

4-1-2 Deck (Top View)

4-2 Main Deck

4-2-1 Braket FL Top Removal

4-2-2 Lever FL Door Removal

4-2-3 Holder FL Cassette Ass'y Removal

4-2-4 Lever FL Arm Ass'y Removal

4-2-5 Slider FL Drive Removal

4-2-6 Bracket Gear, Gear FL Cam, Gear Joint 1, 2 Removal

4-2-7 Assembly of Gear FL Cam, Gear Joint 1, 2

4-2-8 Holder Worm, Gear Worm, Gear Worm Wheel Removal

4-2-9 Motor Loading Ass'y Removal

4-2-10 Gear Loading Drive, Slider Cam, Lever T, S Load Ass'y Removal

4-2-11 Assembly of Gear Loading Drive, Slider Cam, Lever T, S Load Ass'y

4-2-12 Lever Tension Ass'y, Band Brake Ass'y, Sleeve Tension Removal

Note :

4-2-13 Lever S, T Brake Ass'y Removal

Assembly :

4-2-14 Lever Idle Ass'y Removal

Assembly :

4-2-15 Disk S, T Reel Removal

4-2-16 Holder Clutch Ass'y Removal

4-2-17 Lever Up Down Ass'y, Gear Center Ass'y Removal

4-2-18 Assembly of Lever Up Down Ass'y, Gear Center Ass'y

Note :

4-2-19 Guide Cassette Door Removal

4-2-20 Unit Pinch Ass'y, Plate Joint, Spring Pinch Drive Removal

Note :

4-2-21 Lever #9 Guide Ass'y Removal

Note :

4-2-22 FE Head Removal

4-2-23 ACE Head Removal

4-2-24 Slider S, T Ass'y Removal

4-2-25 Cylinder Ass'y Removal

Note :

4-2-26 Belt Pulley Removal

4-2-27 Lever Head Cleaner Ass'y Removal (Optional)

4-2-28 Motor Capstan Ass'y Removal

Assembly :

Note :

4-2-29 How to Manually Eject the Cassette Tape

4-3 Lubrication and recommended replacement time for principal parts

<Thale 1-1>

4-4 Tape Transport System and Adjustment Locations

4-5 Tape Transport System Adjustment

4-5-1 ACE Head Assembly Adjustment

4-5-1(a) ACE HEAD HEIGHT ADJUSTMENT

4-5-1(b) ACE HEAD TILT ADJUSTMENT

4-5-1(c) AUDIO AZIMUTH ADJUSTMENT

4-5-1(e) A/C HEAD POSITION (X-POINT). ADJUSTMENT (PAL SYSTEM ONLY)

Fig. 4-5-5 Tracking Preset and Control Adjustment Only for Models. SV-20U/30U/40U/60U/100U VR3705/VR3805/5705/5805/8705

4-5-2 Linearity adjustment (Guide roller S. T adjustment)

Noto

4-5-3 Check Transition from RPS to Play

4-5-4 Envelope Check

2-2-5 Tape Wrinkle Check

4-6 Reel Torque

4-7 Location Adjustment and Confirmation of Tension Post

5. Alignment and Adjustments (Electrical)

5-1 Preadjustment

5-1-1 Factory Mode

5-1-2 When EEPROM (IC902) Is Replaced

5-2 Factory ("Service") Mode

5-2-1 Procedure for the "Adjustment" Mode