Samsung TV Mount, HG32AB690Q, HG40AB690Q, HG46AB690Q, HG55AB690Q Quick Setup Manual

E

The TV is automatically
turned off and on.

If Standalone Only is

selected

If you change the country
of the Current Location

EE E

E

To register this product please visit
www.samsung.com/register.

Quick Setup Guide

Viewing the Connection Panel

Installing the LED TV Stand

♦ HG32/40/46/55/65AB690Q

Components

When installing the stand, use the provided components and parts.

Connecting the TV with an SBB or STB

➣ Depending on Model and Region.

1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB
(SBB) with the Data cable.

➣ Use data communication.

List of Vendors and Compatible Data Cables Supplied with the TV

➣ Depending on the model.

♦ Refer to the code label on the data cables.

Conrm the code on

the Code Label

Note the

labeled end.

Note the

labeled end.

Hospitality Plug & Play

Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Local Set and Picture mode Setup once.

– Hotel Pl ug & Play is available only one time whe n power is first turned ON.
– Aft er setting up first TV an d Clone TV to USB
– Next T V only needs to exit Hotel Plug & Play, conn ect USB, then Clone USB to T V.
– Depen ding on model and region, som e menu may NOT exist.

♦ UI Scenario

DOOR-EYE

PC IN

PC/DVI AUDIO IN

AUDIO

AV IN 1

AUDIO

VIDEO

COMPONENT

/ AV IN 2

AUDIO

B

VIDEO

DOOR-EYE

VIDEO OUT

PC

IN

PC/DVI AUDIO IN

AV IN

1

A

UDI

O

VIDE

O

COMPO

NENT

/

AV IN 2

A

U

DI

O

B

VIDE

O

DOOR-EYE

VIDEO OU

T

ETH MODEM

Data Cable

List of Parts

➣ The provided accessories may vary depending on the model.

1

Remote Control & Batteries

(AAA x 2)

2

Power Cord

3 DATA Cable

4

Owner’s Instructions / Safety Guide

1 2 3 4

BN68-04956E-04

Connecting through the Variable Output

VARIABLE
AUDIO OUT

VOL-CTRL

DOOR-EYE

PC IN

PC/DVI AUDIO IN

1

2

3

4

5

AUDIO

AV IN 1

AUDIO

VIDEO

COMPONENT

/ AV IN 2

AUDIO

VIDEO

B

DOOR-EYE

VIDEO OUT

6

7

8

0!

9

- SIDE -

VARIABLE
AUDIO OUT

VOL-CTRL

HDMI IN 3

HDMI IN 2

(DVI)

HDMI IN 1

(ARC)

#

$

^

@

(HDD 1.0A) /
CLONING

%

CABLE

AIR

DOOR-EYE

PC IN

PC/DVI AUDIO IN

1

2

3

4

5

COMPONENT

/ AV IN

AUDIO

B

VIDEO

DOOR-EYE

6

8

0!

- SIDE -

VARIABLE
AUDIO OUT

VOL-CTRL

HDMI IN 3

HDMI IN 2

(DVI)

HDMI IN 1

(ARC)

#

$

^

@

(HDD 1.0A) /
CLONING

%

C

B

A

1

2

3

B

A

C

B

A

C

40-55inches
(M4 x L12)

65inches:
M4XL10

Front

Front

Rear

Rear

Top View

Top View

x4

x4

ATTENTION

ATTENTION

4

O

X

DO NOT USE

CHEMICALS

DO NOT USE

CHEMICALS

DO NOT USE

GREASE

DO NOT USE

GREASE

DO NOT USE

OIL

DO NOT USE

OIL

➣ The product connection panel may vary depending on the model.

1 RJP
2 DIGITAL AUDIO OUT
3 PC/DVI AUDIO IN
4 HEADPHONE JACK
5 HP-ID
6 C

OMPONENT / AV IN / AV IN 1 / AV IN 2

7 VIDEO OUT
8 PC IN

9 DOOR EYE
0 DATA
! LAN
@ VARIABLE AUDIO OUT
# VOL-CTRL
$ USB(HDD 1.0A) / CLONING
% HDMI1(ARC), 2(DVI), 3
^ ANT IN(AIR/CABLE)

Current Localset : HKG_DTV

LocalSet

Change Local Set if Located in North America Latin America and Europe.

In other regions, Please press SKIP button move to the next step.

Change Skip

Easy Set Up

Interactive

(Hotel Menu)

Standalone Setup

(Continue Setup)

Standalone Only

(End Setup)

If you select this,
the setup process
will be completed
and go to hotel
menu

Configure your TV

Select your information in the categories below.

Select the wireless
network you want to
connect to.

Select

TSEC_00

WPS(PBC)

Refresh

Picture Mode

Network type

Wireless network

Auto Tuning

Auto Tuning is finding channels for you...

Channel 10

5%

Stop

Digital 0

•TV 0

•Radio 0

•Data/Other 0

Analogue 0

Auto Tuning

Auto Tuning Complete.

0 channels are deleted.

Digital 0

•TV 0

•Radio 0

•Data/Other 0

Analogue 0

Change Settings

Scan Again

MAC Address ff :ff :ff :ff :ff :ff
IP Address 0. 0. 0. 0
Subnet Mask 0. 0. 0. 0
Gateway 0. 0. 0. 0
DNS Server 0. 0. 0. 0

Network Status

Wired network connection failed.

CloseRetry

IP Settings

Wired network connection test stopped.

E

E

If Standalone Septup is

selected

Connected

Wireless
Network

Connected
Wireless
Network

Connected

WIRED

Network

Connected
WIRED
Network

(M4 X L12)
or (M4XL10)

32inches : x7

40~65inches : x8

HG32AB690

HG**AB690

(Except Hong

Kong)

C

(M4 X L12)

x4

C

(M4 X L12)

x3

HG40AB690
HG46AB690
HG55AB690

C

(M4 X L10)

x4

HG65AB690

Set Picture Mode

Configure your TV

Select your information in the categories below.

Select a picture mode
that best suits your
viewing enviroment.

Picture Mode Standard

Wireless network Select

Network type Wireless

Configure your TV

Select your information in the categories below.

Select the wireless
network you want to
connect to.

Picture Mode Standard

Wireless network Select

Network type Wireless

Configure your TV

Select your information in the categories below.

Plug a network cable in
to the back of your TV.

Picture Mode Standard

Network type Wired

Set Clock

CLOCK

You can adjust your time to set DST, Time Zone
and clock mode

Clcok Mode Auto

Date -- / -- / ----

Time -- : -- --

Set current date and
time

MAC Address 1c :5e :3e :7a :13 :21
IP Address 192. 168. 1. 129
Subnet Mask 255. 255. 255. 0
Gateway 192. 168. 1. 1
DNS Server 192. 168. 1. 1

Network Status

Connection verification cancelied.

Wirelss network connection test stopped.

CloseRetry

IP Settings

Wireless network list

PBA SMDLine 13

HG**AB690

(Hong Kong)

HKG_DTV

Warning! TV might not function if Local set is not correctly configured.

When Local Set is changed, TV Will turn off automatically to apply it.

Countries List

Hong Kong

Local Set

>

<

Select your Language

Select your language to start the on screen setup.

English

Press the

udlr

buttons
to move the highlight.
Press the enter button to
select.

Set Language

繁體中文

简体中文

The Language Setting will be applied to Main Menu, and not Plug and Play.

Move to Skip

Auto Tuning

To receive channels, configure the options below
then select Scan.

Aerial Air

Channel Type Digital & Analogue

Select the connected
aerial that you want to
use to get channels

Scan

1

*****1

q w e r t y u i o p ^
a

ENG

xzcv

bn

m,.

.com

? -

Cancel

Done

ClearCaps

123#&

sdfghj

kl~@!

*

234567890

Configure your TV

Select your information in the categories below.

Enter security key.

Show Password

-- : -- --

E

Enter factory

menu

Hospitality Mode Standalone

SI Vendor OFF

Power On

Channel

MyChannel

Menu OSD

Operation

Clock

Music Mode

External Device

External Source

Bathroom Speaker

Eco Solution

Logo / Message

Cloning

REACH Server

Network

Widget

Door Eye

Service

MAIN : Option, MODE : DTV, RES : NOTSUPPORT, Standalone Menu

When complete, power down TV.

Standalone mode has been set.

OK

Move to

Done

or

(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit
our website www.samsung.com/in or contact our Helpline numbers ­18002668282, 180030008282.

TV Setup Complete!

Your TV is now ready to use

OK

[HG690_QSG]BN68-04956E-04Eng.indd 1 2014-03-21  2:58:28

Wall Mount Kit Specications (VESA)

Install your wall mount on a solid wall perpendicular to the oor. When attaching

to other building materials, please contact your nearest dealer. If installed on a
ceiling or slanted wall, TV may fall and result in severe personal injury.

➣ Standard dimensions for wall mount kits are shown in the table below.
➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for

assembly are provided.
➣ Do not use screws that do not comply with the VESA standard screw specications.
➣ Do not use screws that are longer than the standard dimension or do not comply with

the VESA standard screw specications. Screws that are too long may cause damage

to the inside of the TV set.
➣ For wall mounts that do not comply with the VESA standard screw specications, the

length of the screws may differ depending on the wall mount specications.

➣ D

o not fasten the screws too rmly. This may damage the product or cause the product to fall,

leading to personal injury. Samsung is not liable for these kinds of accidents.
➣ S

amsung is not liable for product damage or personal injury when a non- VESA or

non-specied wall mount is used or the consumer fails to follow the product installation

instructions.
➣ Do not mount the TV at more than a 15 degree tilt.
➣ Always have two people mount the TV on a wall.
➣ Remove the screws from the Wall Mount hole,before installing the Wall Mount.(65 inch

model only)

Product

Family

TV size in
inch(cm)

VESA screw hole

specs (A * B) in

millimeters

Standard Screw Quantity

HB690

32~40 inch

(81.3 ~ 101.6 cm)

200 x 200

M8 4

46~65 inch

(116.8 ~ 165.1 cm)

400 x 400

Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.

Specications

Items Specication Comment

TV System

PAL, NTSC, DTMB(Hong
Kong), DVB-T/C(Other region)

Audio out

Speaker out 10W x 2

Variable Audio 4W mono 8 ohm SPK

Phone Jack output
BTL Sound output

Digital audio
out

Optical

Input

Component Y, Pb, Pr, Audio-L/R

PC D-sub, Audio-L/R

A/V Audio Video Jack

HDMI

Compatible with the HDMI

Specications

Antenna

75 ohm Unbalanced, Din Jack,
F Jack

Data

DATA RJ-12

RJP RS232

Operating temperature 10°C ~ 40°C (50°F ~ 104°F)

Operating Humidity 10% ~ 80% non-condensing

Storage Temperature -20°C ~ 45°C (-4°F ~ 113°F)

Storage Humidity 5% ~ 95% non-condensing

➣ Design and specications are subject to change without prior notice.
➣ For the power supply and Power Consumption, refer to the label attached to the product.

Licence

No

Hotel TV Function

Description

Category initial value

5 MyChannel

Mychannel En OFF

Set the My channel function ON/OFF.

Genre Editor -

User can set the genre for searched channel.

6

Menu
OSD

Picture Menu Lock OFF

Enable or disable the Picture Menu.

Menu Display ON

ON : Main Menu display
OFF: Main Menu No display

Channel Menu

Display

OFF

ON: Channel menu display
OFF: Channel menu no display
(Only for Hong Kong model)

7 Operation Panel Button Lock Unlock

Front panel(Local key) operation on/off.

- Unlock: Unlock All panel key.

- Lock: Lock All panel key.

- O

nlyPower : Lock All panel key except Power panel key.

- Menu/Source : Lock Menu and Source panel keys.
Front panel(Local key)only can realize Volume+/­,Channel+/-, Power ON/OFF function

8 Clock

Local Time Manual

Selection of the way to update clock data

- M

anual: Use clock data from DVB channel or manual

clock setting When the TV is in the stand-alone mode.

- T

TX: manual clock setting (with updating from TTX data).

Timer Type WakeUp

WakeUp:Timer type is wakeup mode.Set specic time

for the TV to turn on automatically
OnOff: Timer type is On and Off mode.Set TV to turn

itself on or off automatically at a specied time

(Only for Hong Kong model)

9

Music
Mode

Music Mode AV OFF

To get music output from an mp3/audio player through
an AV Input Source. When on, you can hear sound from
the player through the TV even there is no video signal.
The TV’s backlight, however, remains on. And add a
video signal,it works normally.

Music Mode PC OFF

To get music output from an mp3/audio player through a
PC Input Source. When on, you can hear sound from the
player through the TV even there is no video signal. The
TV’s backlight, however, remains on. And add a video
signal,it works normally.

Music Mode Comp OFF

To get music output from an mp3/audio player through a
Component Input Source. When on, you can hear sound
from the player through the TV even there is no video
signal. The TV’s backlight, however, remains on. And
add a video signal,it works normally.

Music Mode

Backlight

OFF

Backlight On/Off option in Music mode to save energy

No

Hotel TV Function

Description

Category initial value

10

External

Device

7610 Priority AV 1

If the jack priority is set, the corresponding source is
automatically set when a jack is inserted according to
the jack priority

7610 Priority PC 2

If the jack priority is set, the corresponding source is
automatically set when a jack is inserted according to
the jack priority.

7610 Priority HDMI 3

If the jack priority is set, the corresponding source is
automatically set when a jack is inserted according to
the jack priority.

7610 AV Option AV1

Select RJP AV Source (Source selection depends on Model).

RJP HDMI Option HDMI1

Select RJP HDMI Source (Source selection depends on Model).

Sound Bar Out OFF

ON: TV speaker sound will be mute. Sound will come out
through HDMI. You must connect the Sound Bar to hear
the sound(HB690 model :HDMI1).
OFF: Sound will come out through TV speakers normally.

11

External

Source

Video out ON

TV Video out On/ Off. Only support RF and AV mode.
(Only for Hong Kong model)

USB Media Mode Default

When USB is connected to the TV,

- Default : Popup window appears.

- A

utomatic : Enters the USB contents menu automatically.

- D

isable : Neither the pop-up window nor the menu appears.

External Source

Banner

ON

Users can set External Source Banner to On or Off.
On : When TV power On or Mode changed, TV will
display the external source banner.
Off : When TV power On or Mode changed, TV will
not display the external source banner.

Auto Source OFF

On :

When an external source is connected to the TV,
the TV will auto ident and switch to the input source.
PC : Auto Ident PC Input only.
Off : Auto Source is Off.

Anynet+Return

Source

Power On

Src

Set the return source after closing Anynet+.
Power On Src:Return to Power On Src
Last Source:Return to Last Source

12

Bathroom

Speaker

Sub Amp Mode 2

Determines the Sub AMP operation mode.

- 0: Turns the Sub AMP function off (PWM off).

- 1: Determines the Sub volume according to the
main volume control.

That is, the sub volume is determined according to
the Power On Volume, the Min Volume, and the Max

- 2: Determines the volume according to the
bathroom control panel setting.

Sub Amp Volume 6

Sub AMP Volume level at power on initial condition.

No

Hotel TV Function

Description

Category initial value

13

Eco

Solution

Energy Saving OFF

This feature adjusts the brightness of the TV in order
to reduce power consumption.

- Off: Turns off the energy saving function.

- Low: Sets the TV to low energy saving mode.

- M

edium: Sets the TV to medium energy saving mode.

- High: Sets the TV to high energy saving mode.

14

Logo/

Message

Welcome Message OFF

Display Welcome Message.

Edit Welcome

Message

-

Edit Welcome Message.

Hospitality Logo OFF

User can set the logo display Off or the type of logo

le(BMP/AVI). (Can’t use at the same time with

“Welcome Message”)

Hospitality Logo DL -

Download the logo le from USB toTV.

Logo Display Time 5 second

Set the logo display time (3/5/7 Seconds).

15 Cloning

Clone TV to USB -

USB Clone: TV → USB

Clone USB to TV -

USB Clone: USB → TV

Setting Auto

Intialize

OFF

When Setting Auto Initialize is set to On, and the
power is turned off and on or the Master Power is
turned off and on, the data is restored to the cloned
values. If there is no cloned value, even when
the Setting Auto Initialize is set to On, it will be
ignored and the operation will be the same as that
whenSetting Auto Initialize is set to Off

16

REACH
Server

REACH Server

update Time

1hour

Standby REACH Server will be operated, according
to time setting

REACH Update

Immediate

OFF

Make TV operate REACH Server after 1 minute in
Stand-by mode.

REACH Server

Channel

87

Set the default channel for REACH Server

- None : After Auto Scan, Operate REACH Server

- Channel value : Operate REACH Server at the
channel selected

REACH Server

Version

0000

Display REACH Server version of TV

REACH Server

Group ID

ALL

Provided REACH Server ID for operating SIRCH on

a specic set.

S-LYNK REACH OFF

Set whether to use REACH function.

S-LYNK REACH

Volume

ON

S-LYNK REACH Volume On and Off

TICKER OFF

Ticker On and Off

17

Network

Network Setup -

Set IP address to establish Internet connection.

Hotel ID Setting -

Set Hotel ID.

Apps Edit -

Enter the App Download menu

No

Hotel TV Function

Description

Category initial value

18 Widget

Widget Mode OFF

Widget Mode On and Off

Solution Type

Vendor

Server

Select the solution type (It depends on model -Vendor
Server,SINC Server).

Server URL Setting -

Setting the server URL.

License Server IP

Setting

-

Setting the server IP.

IPTV Mode OFF

Use the IPTV mode (it depends model - Only IPTV
model support it).

Virtual Standby OFF

Use the virtual standby mode or not.
When Virtual Standby On, TV power consumption will
be 9.5W to 17.4W (Depends on inches).

Room Num Setting -

Setting Room Num

19 Door Eye

Door Eye Mode OFF

Door Eye function ON and OFF (Only for Hong Kong
model)

Door Eye Source AV1

Select the source that will display the door image.
(Source selection depends on Model)

Prompt OSD ON

Prompt OSD mode ON and OFF
On: The OSD which is asking if you want the output will
be displayed.

- If the user press 'Yes', door image will be displayed in
PIP or Full screen.

- If the user press 'No', Door Eye function will not work.

Off: OSD will not be displayed and automatically changed
to PIP or Full size screen

Source Return Time 7s

Setting the time that decide how long will be
displayed the door image.(3s~20s)

20 Service

Self Diagnosis

for TV

-

Enter Self Diagnosis Menu.

- Picture Test: Use to check for picture problems. If
the problem appears in the test picture, select Yes
and follow the directions on the screen.

- Sound Test: Use the built-in melody sound to check
for sound problems. If the problem occurs during
the test, select Yes and follow the directions on
the screen.

Self Diagnosis for

HTV

-

HD Function Check Menu
On Executing Item Below OSD is displayed­STB SI Vendor Setting : Si Name Ok/Failure
Bathroom AMP : Ok/Failure

SW UPGRADE

SW USB Update function

Service Pattern OFF

Same function with SVC Service Pattern

TV Reset -

Factory reset

Setting the Hospitality Option Data

➣ Depending on Model and Region, some menu are NOT exist at TV set.

To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order.
To Exit from this menu : power off and turn on again.

No

Hotel TV Function

Description

Category initial value

1 Hospitality Mode Standalone

Select the Hotel TV mode. (Standalone / Interactive)

2 SI Vendor OFF

Select the SI Vendor

3 Power On

Power On Channel

EN

Last Saved

Set the default values, which will be applied when the
TV is turned on.

- User Dened : Refers to the settings congured for
Power On Channel, Channel Type.

- Last Saved : Refers to the last saved settings.

Power On Channel 1

TV will turn on to this particular Channel.

Channel Type ATV

Provides channel Type description for Power On
channel selected.
i.e.Selected channel analog or Digital & Antenna
selection(Air or Cable).

Power On Volume

EN

Last Saved

Set the default volume values which will be applied
when the TV is turned on.

- User Dened : Uses the settings congured for
Power On Volume.

- Last Saved : Uses the last saved settings.

Power On Volume 10

TV will turn on with this Volume Level.

Min Volume 0

Minimum Volume Level setting user can set

Max Volume 100

Maximum Volume Level setting user can set

Power On Source TV

Select the Input source when TV is turned on initially.

Power On Option Last Option

Power On(AC Power On) Option

- Standby : Stand-By Mode

- Power On : Power On

- Last Option : Last Power On State

4 Channel

Channel Setup

User can set channel option.
Such as Auto Tunning, Manual Tunning, Antenna setting.

Channel Editor

Provided option for editing Channel Name , Number and video
Mute settings for channels in channel List.

Mixed Channel Map ON

Mix Air and Cable Channels
ON: Both of Air and Cable can watch and display in
Channel Map
OFF: Through Channel Map only can select Air or Cable
channel to watch

Dynamic SI OFF

Off : No Check of the DTV Program channel information.
(DTV channel editor accessible, but addtional channel
Program number auto update not supported)
On : Check the DTV Program channel information. (DTV
channel editor inaccessible)

Channel Rescan

Message

ON

This is a display option for the OSD text that appears

when a user congures the country specications in

hotel models. This option determines whether to activate
the items that are only executed after a manual user

conrmation when the notication message is displayed
while the country specications are being congured.

On - When TV has an event for setting change because of
country spec, It will be shown on the screen.
Off - Even TV has an event for setting change, because of
country spec, it will not be shown on the screen.

[HG690_QSG]BN68-04956E-04Eng.indd 2 2014-03-21  2:58:30