Page 1
2015 Samsung TV
F/W Upgrade Guide
Samsung Electronics
Page 2
Cautions
During the upgrade,
Do not remove the USB Memory drive.
Do not unplug the power cable.
Do not turn off the TV.
※ Warning
Removing USB Memory drive out or unplugging the power cable may cause a
firmware error or main board failure. These issue are not covered by Samsung
warranty policy.
Page 3
Step1. How to prepare the USB Memory Drive
2. Connect the USB Memory Drive to the USB port of your PC.
Copy the file to USB Memory Drive.
1. Download the firmware file from Samsung.com into your computer.
File Name : T-HKMDEUC.zip
3. Follow below steps to extract the file and make a folder for firmware.
The folder should have same name with the file and exist in the root directly
※ An extracting process might be different by application in PC
4. Safely disconnect the USB memory drive by clicking in ‘Safely Remove’ in Task Bar.
T-HKMDEUC
3-A. Click the file and ‘Extract All…’. Then select USB driver that files will be extracted.
(All OS)
T-HKMDEUC.zip
3-B. Make sure that USB Driver has a folder named ‘T-HKMDEUC’
T-HKMDEUC
T-HKMDEUC
Page 4
2. Turn on the TV and wait around 1 or 2
minutes.
1. Insert the USB Memory Drive
containing the firmware into the USB
port of TV.
3. Press the MENU button, select
‘Support’, ‘Software Update’, and then
‘By USB’.
4. The message for searching for update
files is displayed. Press Yes.
Step2. How to upgrade the Firmware by USB
5. If the TV finds a valid firmware version,
it displays the message below.
Press Yes, then TV starts updating.
A new software update is available.
Update from version 1200 to version 1204?
Yes No
6. Press Yes, then TV starts updating.
When the firmware upgrade is
complete, the TV turns off and then
back on by itself.
Updating TV software…
Your TV will turn itself off and on again
Automatically after completing update.
80%
Page 5
1. Turn on the TV.
3. Press the MENU button, select
‘Support’, ‘Software Update’, and then
‘Update now’.
6. It starts downloading. When the
firmware upgrade is completed, the
TV turns off and then back on by itself.
4. The message “Connecting to the
network server…” is displayed.
5. If the TV finds a higher firmware
version from the server, TV asks
you to update new version. Press
Yes.
Updating TV Software…..
Your TV will turn itself off and on again
Automatically after completing update.
OK
2. Confirm that your TV is connected to
the Network by using the Network
Status test.
Checking for updates…
A new software update is available.
Update from version 1200 to version 1204?
NoYes
How to Upgrade the Firmware by Online
Loading...