Samsung TS-H352C, TS-H352A User Manual [en, cs, de]

Samsung's OMS (Optical Media Solution) Customer Support Website

(Http://samsung-ODD.com) offers the latest versions of firmware for ODD products,

user instructions and product information.

Index

Connecting the Cables

Main Page

Safety Precautions

Notational
Installation
While Operating
Other

Introduction

Front
Rear

Setup

Installing the DVD-ROM Drive
Connecting the Cables
Installing the Device Driver
Setting Up the Device Driver

Using the Drive

Using the DVD-ROM Drive
Storing and Cleaning Your Discs
Upgrading the Firmware Flash Memory
System Requirements

Troubleshooting

Solving Technical Problems

Specifications

Safety Precaution

Connecting the Cables

Warning / Caution

Warning : This symbol indicates explanations about extremely dangerous matters.

Caution : This symbol indicates explanations about dangerous matters.

If users ignore this symbol and handle the device the wrong way, serious injury or death could
result.

If users ignore this symbol and handle the device the wrong way, damage to home or property
could result.

Notational

Failure to follow directions noted by this symbol could result in bodily harm or damage to
equipment.

Prohibited

Important to read and understand at all times

Do not disassemble

Any change or modification not expressly approved by designated qualified personnel could void your
authority to operate this device.

Always make sure that the disc does not have a crack before use. If the disc has a crack (especially
around the center hole), it is recommended to make a copy immediately and use the copy instead.
When a cracked disc is used continuously, the size of the crack is likely to grow and this will eventually
result in irreparable damage to the disc.

Important to read and understand at all times.

Safety Precaution

Avoid low

Avoid high

Connecting the Cables

Installation

Place the drive on a level surface.

-

Failure to do so may cause the device to fall onto a hard surface,
resulting in damage or malfunction.

Do not place the drive in direct sunlight.

- or high-temperature environments.

-humidity environments.

Safety Precaution

Connecting the Cables

While Operating

Handle with caution to prevent damage from external shock.

Do not drop the drive, and protect it fromsevere shocks.

- It can damage the drive or cause it to malfunction.

Do not move the drive while in operation and do not attempt to open
the disc tray byforce.
Make sure to close all working programs before attempting to open the
tray and always usethe open/close button.

- Do not insert a pin into the emergency opening while in operation.

Do not use cracked, distorted or damaged discs.

- In particular, a disc with a crack on the inner tracks may break while in
use.

Safety Precaution

Never allow food particles or foreign substances to enter the drive

Connecting the Cables

Other

casing.

To protect against the risk of fire, do ot spill such liquids as
alcohol and benzene on the drive.

Do not disassemble, attempt to repair or modify the device
without express approval as directed in the manual.

- To reduce the risk of damage, electric shock, and fire,