Samsung TMC-FSCM1-B, TMC-FSCM1ACM-A, TMC-FSCM1POEM-A, TMC-FSCS1-B, TMC-FSCS1ACM-A Specsheet

...

10/100 Mbps Ethernet Electrical To Optical Media Converters

with Optional 30W PoE

TMC-F Series

The Ethernet media converter series are one-channel Ethernet electrical to optical media converters. These auto-negotiating devices accept a 10/100 Mbps electrical input and convert this to a 100 Mbps optical output. This series of media converters use multimode and single-mode optical fiber and one and two fiber SC and ST optical connectors. LED indicators confirm operational status. All models are environmentally hardened with no electrical or optical adjustments (Plug and Play). The standard size units may be either wall or rack mounted. Non-PoE units are powered by an included DC power supply. PoE models provide full compliance with IEEE 802.3at as Power Sourcing Equipment (PSE), with a maximum power of 30 watts, making them ideal for those applications where the remote equipment draws significant power.

he TMC-F Series standard size units may be directly plugged into the SBP-C14 /

T SBP-C03 Rack or operated as a standalone module. The TMC-F-M small size units operate as standalone modules only.

FEATURES

› 10/100 Mbps Ethernet

• 10/100 BASE-T/TX electrical port

• 100 BASE-FX optical port

› Electrical port supports Auto-Negotiation for 10 Mbps or 100

Mbps, full duplex or half duplex data.

› Power Sourcing Equipment (PSE): Provides IEEE

802.3af/802.3at 30 watts P

output demand applications of remote Ethernet equipment

› Optical port supports 100 Mbps full duplex data

› Automatic MDI/MDI-X crossover

› Distances up to: 3 km (2 mi) Multimode

20 km (12 mi) Single Mode

› Transparent to data encoding/compatible with major data

protocols

› Tested and certified by an independent laboratory for full

compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/ TS-2 and CALTRANS Traffic Signal Control Equipment Specifications

oE+ for high

INCLUDED CONVERTER 1POWERED

› ST or SC optical connectors

› 1 or 2 fiber design

› PoE Models DC powered, non-PoE models AC/DC powered

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other voltage transient events.

› No in-field optical adjustments required

› LED Indicators

› Standard size is hot-swappable rack module

› Standard size is interchangeable between stand-alone or rack

mount use

› IEEE 802.3 compliant

-40º TO +75º

APPLICATIONS

› 10/100 Mbps Ethernet Media Converter

› High Speed Computer Links

FIRST EDITION

TMC-F Series

SPECIFICATIONS

10/100 Mbps Ethernet Electrical To Optical Media Converters

with AC/DC Input or DC Input/30 W PoE Output

Ethernet

Data Rate 10/100 Mbps

Connectors

Optical Power Electrical

Power

Operating Voltage Range

Power Consumption Current Protection PoE Pin Assignment

Maximum PoE Current

IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port/Full Duplex Optical Port

SFP; ST or SC, 1 or 2 Fibers Terminal Block RJ45

Non-PoE models:

AC: 22 to 27 VAC DC: 8 to 24 VDC

PoE Models 48 to 57 VDC @ 0.85A

Non-PoE: 3W Max, PoE 33W Automatic Resettable Solid-State Current Limiters RJ-45 port supports IEEE802.3af/802.3at End-point Positive (VCC+): RJ45 pin 1, 2 or 4, 5 Negative (VCC-): RJ45 pin 3, 6 or 7,8

Data: (1, 2, 3, 6)

625 mA continuous per mode

Electrical & Mechanical

LED Indicators Optical Link/Data Activity

Electrical Link/Data Activity

Power Circuit Board Meets IPC Standard Size (L×W×H) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)

Mini: 3.3 × 2.5 × 1.1 in (8.4 × 6.4 × 2.8 cm) Shipping Weight: <2 lb /0.9 kg

Environmental

MTBF >100,000 hours Operating Temp Storage Temp Relative Humidity

AGENCY COMPLIANCE

-40˚ C to +75˚ C

-40˚ C to +85˚ C

0% to 95% (non-condensing)

ORDERING INFORMATION

Part Number Description

TMC-FSTM1ACM-A Small 100Mbps Media Converter (A), ST Connector, AC /DC Power, mm, 1 fiber

TMC-FSTS1ACM-A Small 100Mbps Media Converter (A), ST Connector, AC /DC Power, sm, 1 fiber

TMC-FSTM1POEM-A Hardened 100Mbps Media Converter, ST Connector, mm, 1 fiber, “A” Unit, (requires “A” and “B” units) 48V, 30W POE output, Power Supply Not Included

TMC-FSTS1POEM-A Hardened 100Mbps Media Converter, ST Connector, sm, 1 fiber, “A” Unit, (requires “A” and “B” units) 48V, 30W POE output, Power Supply Not Included

TMC-FSTM1-B 100Mbps Media Conver ter (B), ST Connec tor, mm, 1 fiber

TMC-FSTS1-B 100Mbps Media Conver ter (B), ST Connec tor, sm, 1 fiber

TMC-FSCM1ACM-A Small 100Mbps Media Converter (A), SC Connec tor, AC/DC Power, mm, 1 fiber

TMC-FSCS1ACM-A Small 100Mbps Media Converter (A), SC Connec tor, AC/DC Power, sm, 1 fiber

TMC-FSCM1POEM-A Hardened 100Mbps Media Converter, SC Connector, mm, 1 fiber, “A” Unit, (requires “A” and “B” units) 48V,

TMC-FSCS1POEM-A

TMC-FSCM1-B

TMC-FSCS1-B 100Mbps Media Converter (B), SC Connector, sm, 1 fiber

TMC-FSFPPOE30M Hardened 100Mbps Media Converter, SFP Required, 48V, 30W POE output, Power Supply Included

Accessories

Options

Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth.

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.

In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

Hardened 100Mbps Media Converter, SC Connector, sm, 1 fiber, “A” Unit, (requires “A”

100Mbps Media Converter (B), SC Connector, mm, 1 fiber

DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included, for benign 0 to 50ºC applications only. Hardened power supply PWR-DR12033 available)

PoE Power Supply (PWR-DR48060), DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (SBP-UDR), Card Cage Racks (SBP-C14 / SBP-C03 )

and “B” units) 48V

TYPICAL APPLICATION

TMC-FSCM1ACM-A

TMC-FSTM1-B

30W POE output, Power Supply Not Included

Ethernet device

Cat-5 Cable

Optical Fiber

E E + PoE+

1 Fiber, ST Multimode

2 km (1.2 mi)

FIRST EDITION

TMC-FSCM1POEM-ATMC-FSTM1-B

48V Power Supply