Samsung TEU-F01, TEU-F04, TEU-F16, TEC-F04, TEC-F16 Specsheet

...

Ethernet-over-Copper Extender With Pass-Through PoE

TEC-F / TEC-U Series

EXTENDER PASS-THRU-40º TO +75º

The Ethernet over copper TEC-F / TEC-U Series supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10/100Mbps, and 1-pair or 4-pair (UTP) settings.

FEATURES

› Transmits individual Ethernet data channels with Pass-

through PoE over standard UTP or Coaxial cable

› Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or

2,000 feet (610 m) at 100 Mbps over UTP cable

› Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or

2,000 feet (610m) at 100 Mbps over Coaxial cable

› Extended temperature operation from -40°C to +75°C

› Extended Pass-through PoE meets the IEEE 802.3af standard

for Power over Ethernet

› Full 10/100 Mbps Bandwidth

› Supports Multicast, Unicast and Jumbo Frame

› Symmetric Bandwidth provides consistent upload and

download with virtually zero packet loss over the total usable distance

› Type tested to RFC-2544 TCP/IP network bandwidth packet

transmission standards

› User-selectable data rate for maximum bandwidth and

transmission distance utilization

› Complies with all major IEEE standards and RFC network

protocols for UDP, TCP/IP, HTTP/HTTPs

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

› LED status indicators confirm operating status

› Available in small-size, standard interchangeable stand

alone or 1RU high rack mounted models

APPLICATIONS

› Retrofit existing analog CCTV installations to Ethernet-

based systems

› CCTV systems for casinos, airports, school campuses

FIRST EDITION

TEC-F / TEC-U Series

SPECIFICATIONS

Ethernet-over-Copper Extender With Pass-Through PoE

Ethernet

Data Interface 10/100BaseT(X) Ethernet Data Rate DIP-switch selectable 10/100Mbps

Full data rate / full duplex up to the maximum

rated distance RFC 2544 TCP/IP Packet Transmission Standards IEEE 802.3af PoE,

RFC: 768 UDP, 2068 HTTP, 793 TCP

791 IP, 1783 TFTP, 894 IP over Ethernet. Transmission Distances¹ See chart below

Connectors

Ethernet RJ-45 Extended Distance Coaxial (C): female BNC

Ethernet (U): RJ-45 Operating Power Powered by PoE or 2-pin screw terminal for

local power

Power

Pass-Through Mode 1 CH: Operates on PoE power

or optional 9 to 36 VDC or 24 VAC, 1.5 W

4 CH: 9 to 15 VDC, 5W

16 CH: 9 to 15 VDC, 20W Current Protection Automatic Resettable Solid-State Current Limiters

Mechanical

LED Indicators Operating Power

Ethernet Link/Activity

Extended Link/Activity Circuit Board Meets IPC Standard Size (L×W×H) 1 CH: 3.3 × 2.5 × 1.1 in (8.4 × 6.4 × 2.8 cm)

4 CH: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)

16 CH: 6.1 × 19 × 1.75 in (15.5 × 48.26 × 4.45 cm) Number of Rack Slots 1 (4CH Version Only) Shipping Weight 1 CH: <1 lbs./0.5 kg

4 CH: <2 lbs./0.9 kg

16 CH: <5 lbs./2.3 kg

Environmental

MTBF >100,000 hours Operating Temp – 40˚ C to +75˚ C

UL Safety certifications conducted at maximum

ambient temperatures (Tma) of 65ºC. Storage Temp – 40˚ C to +80˚ C Relative Humidity 0% to 95% (non-condensing)²

GENCY COMPLIANCE

ORDERING INFORMATION

Model Name Description Position Channels Form Factor Cable

TEC-F01 1 Port Ethernet-over-Coax Extender Local/Remote Configurable 1 Small Size Coax

TEU-F01 1 Port Ethernet-over-UTP Extender Local/Remote Configurable 1 Small Size UTP

TEC-F04 4 Port Ethernet-over-Coax Extender Local/Remote Configurable 4 Standard (1 Slot) Coax

TEU-F04 4 Port Ethernet-over-UTP Extender Local/Remote Configurable 4 Standard (1 Slot) UTP

TEC-F16 16 Port Ethernet-over-Coax Extender Local 16 1 RU 19” Rack Mount Coax

TEU-F16 16 Port Ethernet-over-UTP Extender Local 16 1 RU 19” Rack Mount UTP

Accessories:

Options DIN-Rail Mounting Adaptor Kit - With Mounting Hardware (Optional, order model SBP-UDR) (Suitable for 1CH and 4CH units only)

[1] Distance figures are based on a 50 V PSE PoE power source, and external power supplies for the extenders. Distance figures are

obtained using in-house testing mirroring installations. Factors such as coaxial and copper cable quality, the number of connectors and splices in the cable run, the use of PoE, and environmental conditions encountered within the installation might affect the actual transmission distance and should be taken into consideration. Due to advanced negotiation signaling required in IEEE802.3at applications, pass-through applications are limited to IEEE802.3af PD devices only. When using UTP models Pass-Through PoE is only possible in 4-pair mode.

Unit-appropriate power supply (one each provided with each extender unit, for benign 0 to 50ºC applications only. Hardened power supply available)

SBP-C14 / SBP-C03 Card Cage Racks

FIRST EDITION

+ 1 hidden pages