Samsung SGH-A707, SGH-A707C, Sync, a707 - SGH Sync Cell Phone User Manual

Download

Page 1

A707CFJ4_PS_101306_F5

SGH-A707 Series

PORTABLE Quad-BAND

MOBILE PHONE

User Guide

Please read this manual before operating your

phone, and keep it for future reference.

Page 2

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), L.P.

Headquarters: Customer Care Center:

1301 E. Lookout Drive 1000 Klein St.

Richardson, TX 75082 Plano, TX 75074

Toll Free Tel: 1.888.987.HELP (4357)

Internet Address: http://www.samsungusa.com

2006 Samsung Telecommunications America, L.P. is a registered trademark of

Samsung Electronics America, Inc. and its related entities.

GH68-12492A

Printed in Korea

Openwave® is a registered Trademark of Openwave, Inc.

RSA® is a registered Trademark RSA Security, Inc.

Page 3

A707CFJ4_PS_101306_F5

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

Page 4

Table of Contents

Section 1: Getting Started .......................................................................................... 8

SIM Card Information ................................................................................................................. 8

Turning the Phone On or Off ................................................................................................... 11

Setting Up Your Voice Mail ....................................................................................................... 11

Section 2: Understanding Your Phone ..................................................................... 13

Features of Your Phone ............................................................................................................ 13

Open View of Your Phone ......................................................................................................... 14

Closed View of Your Phone ......................................................................................................16

Internal Display Layout ............................................................................................................ 17

Selecting Functions and Options .............................................................................................. 20

Command Keys ....................................................................................................................... 21

Section 3: Call Functions ......................................................................................... 23

Making a Call ........................................................................................................................... 23

Answering a Call ...................................................................................................................... 25

Recent Calls ............................................................................................................................ 25

Call Time ................................................................................................................................. 27

Data Volume ............................................................................................................................ 27

Data Call Time ......................................................................................................................... 28

Silent Mode ............................................................................................................................. 28

Options During a Call ............................................................................................................... 29

Section 4: Menu Navigation ..................................................................................... 33

Menu Navigation ...................................................................................................................... 33

Menu Outline ........................................................................................................................... 34

Section 5: Entering Text ........................................................................................... 46

Changing the Text Input Method .............................................................................................. 46

Using the T9 Input Method ....................................................................................................... 47

Using the Alphabet Input Method ............................................................................................. 48

Using the Symbols Input Method .............................................................................................. 49

Using the Numeric Input Method .............................................................................................. 49

Section 6: Understanding Your Address Book ........................................................50

Using Contacts List .................................................................................................................. 50

Address Book Entry Options .....................................................................................................51

Adding a New Contact ............................................................................................................. 52

Dialing a Number from the SIM Card using the Location Number ............................................. 55

Speed Dial ............................................................................................................................... 55

Finding My Own Phone Number ............................................................................................... 56

FDN Mode ............................................................................................................................... 57

Group Settings ......................................................................................................................... 57

Managing Address Book Entries ............................................................................................... 58

Page 5

Table of Contents 5

Section 7: Messaging ...............................................................................................60

Types of Messages .................................................................................................................. 60

Creating and Sending New Messages ......................................................................................60

Text Messages ......................................................................................................................... 60

Retrieving New Messages ........................................................................................................66

Using Message Options ............................................................................................................ 68

Using Instant Messenger (IM) ...................................................................................................69

Signing into your IM Account ...................................................................................................69

Signing into your Mobile Email .................................................................................................70

Using Message Templates ....................................................................................................... 70

Deleting Messages ..................................................................................................................71

Messaging Settings ................................................................................................................. 71

Memory Status ........................................................................................................................ 74

Section 8: Changing Your Settings .......................................................................... 75

Sound Settings ........................................................................................................................ 75

Display Settings ....................................................................................................................... 78

Time & Date .............................................................................................................................80

Phone Settings .........................................................................................................................81

Call Settings ............................................................................................................................ 82

Connectivity ............................................................................................................................. 86

Configuring your Phone’s Connections ..................................................................................... 89

Configuring your Phone’s USB Connection ............................................................................... 90

Software Update ......................................................................................................................91

Application Settings .................................................................................................................91

Reset Settings ......................................................................................................................... 94

Memory Settings ...................................................................................................................... 95

Section 9: Cingular Mall ...........................................................................................97

Shopping for Audio .................................................................................................................. 97

Shopping for Games ................................................................................................................ 98

Shopping for Graphics .............................................................................................................. 98

Shopping for Multimedia Content ............................................................................................. 99

Shopping for Applications ........................................................................................................ 99

Accessing the MEdia Net Home .............................................................................................100

Section 10: Cingular Music™ ................................................................................ 101

Accessing Cingular Music ......................................................................................................101

Adding Music to your Handset ................................................................................................ 102

Using the Music Player ........................................................................................................... 104

Using Playlists ....................................................................................................................... 105

Using MusicID ........................................................................................................................ 108

Streaming Music .................................................................................................................... 110

Music Video ........................................................................................................................... 111

The Buzz ............................................................................................................................... 112

Music Community .................................................................................................................. 113

Page 6

Section 11: Cingular Video ..................................................................................... 114

Cingular Video Options ........................................................................................................... 115

Media Clip Options ................................................................................................................. 116

Using the Video Categories .................................................................................................... 118

Customizing Cingular Video ................................................................................................... 118

My Purchases ........................................................................................................................ 119

Parental Controls ................................................................................................................... 120

Section 12: Using the Applications ........................................................................ 122

Shop Applications .................................................................................................................. 122

Using the Camera .................................................................................................................. 123

Using the Camcorder ............................................................................................................. 127

Media Player .......................................................................................................................... 131

Record Audio ......................................................................................................................... 131

Alarms ................................................................................................................................... 132

Calendar ................................................................................................................................ 134

Tasks .................................................................................................................................... 137

Tools ..................................................................................................................................... 138

Section 13: MEdia Net and WAP ............................................................................ 140

Accessing the MEdia Net Homepage ...................................................................................... 140

Accessing the MEdia Net Site ................................................................................................ 143

Navigating with the WAP Browser .......................................................................................... 143

Using Favorites ...................................................................................................................... 145

Downloading Multimedia Files ............................................................................................... 146

Using your History .................................................................................................................. 147

Clearing the Cache ................................................................................................................ 147

Clearing the Cookies .............................................................................................................. 147

Changing the WAP Profiles ..................................................................................................... 148

Section 14: Accessibility ........................................................................................ 150

Section 15: Health and Safety Information ........................................................... 151

Health and Safety Information ................................................................................................ 151

UL Certified Travel Adaptor .................................................................................................... 153

Consumer Information on Wireless Phones ............................................................................ 153

Road Safety ........................................................................................................................... 159

Operating Environment .......................................................................................................... 161

Using Your Phone Near Other Electronic Devices .................................................................... 161

Potentially Explosive Environments ........................................................................................ 162

Emergency Calls .................................................................................................................... 163

FCC Notice and Cautions ........................................................................................................ 163

Other Important Safety Information ........................................................................................ 164

Product Performance ............................................................................................................. 164

Availability of Various Features/Ring Tones ............................................................................ 165

Battery Standby and Talk Time .............................................................................................. 165

Battery Precautions ................................................................................................................ 166

Care and Maintenance ........................................................................................................... 167

Page 7

Table of Contents 7

Section 16: Warranty Information .........................................................................168

Standard Limited Warranty ....................................................................................................168

Index .......................................................................................................................172

Page 8

Section 1: Getting Started

Topics Covered

• SIM Card Information

• Turning the Phone On or Off

• Setting Up Your Voice Mail

This section describes the first steps to operating your phone.

SIM Card Information

When you subscribe for 3G cellular network services, you receive a plug-in USIM (Universal Subscriber Identity Module) card loaded with your subscription details, such as your PIN, and available optional services.

Install and charge the phone

1. If necessary, power-off the phone by holding down the key until the

power-off image displays.

2. Remove the battery by pressing the battery lock down and slide the battery

cover away, as shown.

Page 9

Section 1: Getting Started 9

Inserting the SIM card

Important! The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use

caution when inserting or removing the card and keep all SIM cards out of reach of children.

Make sure the gold contacts of the card are face down, then slide the SIM card into the socket.

Installing the Battery

1. Align the battery tabs with the slots at the bottom of the phone.

2. Press the battery down until it clicks into place. Make sure that the battery

is properly installed before switching on the phone.

3. With the battery in position on the phone, place the cover back on the

handset and slide it in until it clicks.

Page 10

Charging a Battery

Your phone is powered by a rechargeable Li-ion battery. Use the travel adaptor to charge the battery, and use only Samsung approved batteries and chargers.

Note: You must fully charge the battery before using your phone for the first time. A discharged battery recharges fully in approximately 200 minutes. You can use the phone while the battery is charging, but this causes the phone to charge more slowly.

Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your warranty.

1. Plug the connector of the travel adaptor into the jack on the side of the

phone.

2. Plug the adaptor into a standard AC wall outlet.

3. When the phone is completely charged (the battery icon becomes still),

unplug the adapter from the power outlet.

4. Remove the adapter from the phone by gently pulling the connector out.

Note: You must unplug the adaptor before removing the battery from the phone during charging to avoid

damage.

Page 11

Section 1: Getting Started 11

Low Battery Indicator

When the battery is weak and only a few minutes of talk time remain, a warning tone sounds, the “Battery Low” message repeats at regular intervals on the display, and the empty battery icon blinks. The backlight turns off to conserve the remaining battery power.

If the battery level becomes too low, the phone automatically turns off. Recharge your battery.

Turning the Phone On or Off

1. Open the phone.

2. Press and hold the key until the phone power-on screen displays.

Note: Do not turn on the phone when mobile phone use is prohibited.

3. If the phone asks you to enter a password, enter a password and press the

Confirm soft key or the key. For further details, see "Change Phone

Password" on page 93.

The phone searches for your network and after finding it, the Idle screen displays. Now, you can make or receive calls.

Note: The display language is preset to Automatic at the factory. To change the language, use the Language menu. For further details, see "Phone Settings" on page 81.

4. When you wish to switch off the phone, press and hold the key until the

power-off image is displayed.

Note: You must store the voicemail server number before accessing the server. Your service provider can give you the number.

Setting Up Your Voice Mail

To access you voice mail from your keypad, use the following steps:

1. Open the phone to access your keypad.

2. From an Idle screen, press and hold the key.

3. Follow the voice mail prompts to access messages.

Page 12

Accessing Your Voice Mail

1. In Idle mode, press the Menu soft key to access Menu mode.

2. Highlight Recent Calls and press the key.

3. Highlight Voice Mail.

4. Highlight Connect to Voice Mail and press the Select soft key or the

key.

5. When connected, follow the voice prompts from the voice mail center.

Changing the Voice Mail Name and Number

Your SIM card gives you default service number of the voice mail center. However, you may need to change the number. Use the following procedures to change your voice mail number.

1. In Idle mode, press the Menu soft key to access Menu mode.

2. Highlight Recent Calls and press Select soft key or the key.

3. Highlight Voice Mail and press Select soft key or the key.

4. Highlight Voice Server Number and press the Select soft key or the

key.

5. Press the Edit softkey.

6. To edit the Voice Server Name, highlight Name and press and press to

delete the current name and then use your keypad to enter a replacement name.

- or -

7. To edit the Voice Mail Number, highlight Center Address and press to

delete the current number.

8. Enter your new Voice Server number and press the Save soft key or the

key to save this new number.

9. Press the key to return to Idle mode.

Page 13

Section 2: Understanding Your Phone 13

Section 2: Understanding Your Phone

Topics Covered

• Features of Your Phone

• Open View of Your Phone

• Closed View of Your Phone

• Internal Display Layout

• Selecting Functions and Options

• Command Keys

This section outlines some key features of your phone. It also displays the screen and the icons that are displayed when the phone is in use.

Features of Your Phone

Your phone is lightweight, easy-to-use and offers many significant features. The following list outlines a few of the features included in your phone.

User friendly, menu driven access to features and options.

• Bluetooth

• Camera and camcorder

• Instant Messaging capability

• E-mail

• Featured applications provide alarms, calendar, calculator, record audio, converter, timer, stopwatch, and world time.

• File viewer

• Name card

• Multimedia Message Service (MMS)

• Multimedia capability (with included Media player)

• Photo caller ID

• Speakerphone capability

• Web browser

Page 14

Open View of Your Phone

The following illustrations show the main elements of your phone:

Keys

The following list correlates to the open and front view illustrations.

1. Display: This screen displays all the information needed to operate your

phone.

2. Navigation keys: This key allows you to scroll through phone menu

options and provides a shortcut to phone functions from standby mode.

3. Soft key: Performs the functions indicated by the screen text on the bottom

of the display.

4. Headset jack/Adapter jack: Allows you to plug in the travel adapter

(power), PC connection cable (data transfer), and optional headset for safe, convenient, hands-free conversations.

5. Music key: Allows you to access both local and web-based Music

applications.

10. Microphone

1. Display

2. Navigation keys

3. Soft key (left)

4. Headset jack/

5. Music key

7. Send key

6. Volume keys

Adapter jack

9. Special function keys

11. Alphanumeric keypad

12. Clear key

13. Power on/off/Menu Exit key

14. Swap key

3. Softkey (right)

15. Menu access/Confirm key

16. Earpiece

8. Voicemail key

(WAP browser)

Page 15

Section 2: Understanding Your Phone 15

Volume key: Allows you to adjust the ringer volume in standby mode or

adjust the voice volume during a call. The volume key can also be used to scroll up or down to navigate through the different menu options. To mute the ringer during an incoming call, press the volume key up or down. When the phone is closed, press and hold these keys to toggle the display on or off. This key is also used when the Music Player is active.

䢇 If you are playing music and the backlight goes out, you will need to press and

hold this key to gain access to the music player keys when the flip is closed. If the backlight is out, the keys themselves will not wake up the phone or control the music player.

7. Send key: Allows you to place or receive a call. In standby mode, press the

key once to access the Recent Call log. If you press and hold the key down, you will initiate the most recent call from the Recent Call log.

8. Voicemail key: Press and hold the key to automatically dial your

voicemail.

9. Special Function keys: Asterisk/Shift key-enters the

[

] character for calling features. In text mode, press to change the character input type. Pound/Space key-enters the pound

[#] character for calling features. In text entry mode, press to enter a space between characters. Press and hold the to activate/deactivate the Silent profile. Press and hold

to enter a pause between numbers.

10. Microphone: The Microphone allows the other callers to hear you clearly

when you are speaking to them.

11. Alphanumeric keypad: Use these keys to enter numbers, letters and some

special characters. When in Idle mode, press and hold the key to access your voicemail server or press and hold to enter an International call prefix.

12. Clear key: Deletes characters from the display when you are in text entry

mode. Deletes items when in an application. When in a main menu, press to return to the previous menu.

13. Power on/off/Menu Exit key: Ends a call. Press and hold this key for a few

seconds to power your phone On or Off. While in the main menu, it returns the phone to standby mode and cancels you input. When you receive an incoming call, press to reject call.

14. Swap key: Opens the application switch window which allows you to

select from a group of different applications without having to exit from the currently active application.

Page 16

15.

Menu confirm key (WAP browser): When navigating through a menu

accepts the highlighted choice in the menu. If you press once in Idle mode, the WAP browser will launch.

16. Earpiece: Used to listen to audio from your phone.

Closed View of Your Phone

Keys

The following list correlates to the open and front view illustrations.

1. Camera lens: The camera lens is used for taking photos.

2. Front LCD: Your phone has an external display on the front of the phone. It

indicates when you have an incoming call or message. It also displays date, time, reception, battery power, and any icons associated with alerts, such as messages, or a set alarm.

3. Media player control key: These touch sensitive pushbuttons control the

progress of the media being displayed on the front LCD. These controls include: (returns to the previous file), (launches the media player and pauses/resumes playback), and (skips to the next file during playback).

4. Media Player/Camera/Profiles key: While in Idle mode, holding down this

key for a few seconds launches an on screen menu which provides access to the Media Player, Camera, and Profiles (Audio). While in camera mode, this key allows you take/snap a picture.

5. Memory card slot: Used to install an optional microSD™ card for

additional data storage.

Back Light

A back light illuminates the display and the keypad when you press any key or open the phone. It turns off when no keys are pressed within a given period of time, and/or dims the light, depending on the settings in the Backlight Time menu.

1. Camera lens

2. Front LCD

3. Media player control keys

4. Media Player/Camera/Profiles

5. Memory card slot

key

Page 17

Section 2: Understanding Your Phone 17

Internal Display Layout

The display has 3 areas:

Icons

Shows the received signal strength. The greater the number of bars, the stronger the signal.

Appears when the phone is accessing services in a GPRS network. When data is being transferred, this icon animates.

Appears when the phone is accessing services in an EDGE network. When data is being transferred, this icon animates.

Appears when the phone is accessing services in a 3G (UMTS) network. When data is being transferred, this icon animates.

Appears when the phone is accessing services in a 3G+ (HSDPA) network. When data is being transferred, this

icon animates.

Appears when a call is in progress.

Appears when you there is no network coverage available. When you are out of the service area, you cannot make or receive voice calls.

Appears when an alarm is set on your phone.

Icons

Text and Graphics

Softkey function indicators

Page 18

Appears when your incoming phone calls are being forwarded to another number.

Appears when a new voice mail has been received.

Appears when a new text message has been received.

Appears when a new multimedia message has been received.

Appears when a new E-mail message has been received.

Appears when a push-messages has been received from the WAP server.

Appears when a new Over the Air (OTA) software update file has been received.

Appears after your memory card has been inserted.

Appears when Bluetooth wireless technology is active. When transferring data, this icon blinks red and blue.

Appears when a Bluetooth wireless headset is active and in use.

Appears when you are connected to a PC via a USB port.

Appears when you are browsing the Internet while using the phone as a modem.

Appears when you are connected to a secured web page.

Note: The default phone profile is Normal.

Appears when the phone’s profile is set to either Normal or Driving. This indicates that the phone’s incoming Alert Type is set to melody. This audio icon is accompanied on screen

by the Driving icon.

Page 19

Section 2: Understanding Your Phone 19

Appears when the phone’s profile is set to Silent. In this case, the speaker is muted and the phone only vibrates and displays information on its front panel LCD. This Vibrate off icon is

accompanied on screen by the Vibrate icon.

Appears when the phone’s profile is set to Silent. This indicates that the phone’s incoming Alert Type is set to vibrate only. This icon is accompanied on screen by the Vibrate off icon.

Appears when the phone’s profile is set to Meeting. In this case, both the speaker and vibration features are disabled and only the front panel LCD displays information. This icon is

accompanied on screen by the Vibrate Off icon.

Appears when the phone’s profile is set to Meeting or Airplane. This indicates that the phone’s incoming Alert Type is set to

mute the speakers and deactivate the vibration feature. This Vibrate Off icon is accompanied on screen by either the Meeting or Airplane icon.

Appears when the phone’s profile is set to Driving. In this case,

the speaker is active. In this case, the speaker is active and will

launch the currently selected ringtone or melody when the associated notification is activated. This icon is accompanied on screen by the Audio icon.

Appears when the phone’s profile is set to Outdoor. In this case,

the speaker is active, the volume settings are raised to their

highest levels, any currently active ringtones or melodies are activated, and the phone’s vibrate feature is activated. This icon is accompanied on screen by the Vibrate/Audio icon.

Appears when the phone’s profile is set to Outdoor. This

indicates that the phone’s incoming Alert Type is set to melody

and vibrate. This vibrate/audio icon is accompanied on screen by the Outdoor icon.

Page 20

Appears when an incoming call Alert Type is set to Airplane. This indicates that the phone’s incoming Alert Type allows you

to use many of your phone’s features, such as Games, Music, Voice Memos, etc., but you cannot send or receive any calls or access online information. This icon is accompanied on screen by the Vibrate Off icon.

Appears when the speakerphone feature is being used during

an active call.

Shows the level of your battery. The more bars you see, the

more power you have remaining.

Selecting Functions and Options

Your phone offers a set of functions that can be customized for your ease and specific needs. These functions are arranged in menus and sub-menus, accessed using the two soft keys. Each menu and sub-menu allows you to view and alter the settings of a particular function.

In some functions, you may be asked for a password or PIN. Enter the code and press the Select soft key or the key.

When you access a list of options, your phone highlights the currently active option. If, however, there are only two options, such as On/Off or Enable/Disable, your phone highlights the option that is not currently active, so that you can select it directly.

Selecting Options

To view the various functions and options available and to select the one you want:

• Press the appropriate soft key.

• To select the function displayed or the option highlighted, press the Select soft key or

the key.

• To view the next function or highlight the next option on a list, press the Down

Navigation key or the key on the left side of the phone.

• To move back to the previous function or option on a list, press the Up Navigation key

or the key on the left side of the phone.

• To move back up one level in the menu structure, press the Back soft key.

• To exit the menu structure without changing the settings, press the key.

Page 21

Section 2: Understanding Your Phone 21

Command Keys

Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the left soft key and the right soft key .

Soft Keys

The roles of the soft keys vary depending on the function you are currently using; the labels on the bottom line of the display just above each key indicate their current role.

Left Soft Key

Some functions of the left soft key are as follows.

• In the Idle screen, press the Menu (left) soft key to open the Menu screen.

• When in a menu mode the left soft key function is Select.

Right Soft Key

Some functions of the right soft key are as follows.

• In the Idle screen, press the Options soft key to open the Options Menu screen.

• When in a menu mode the right soft key function is Back.

Clear Key

The CLR key is used to erase or clear numbers, text, or symbols from the display. You can also use to return to a previous menu or to return to standby mode from any menu.

• If you enter an incorrect character, briefly press to backspace (and delete) the character.

• To erase the entire sentence, press and hold .

• To back up one menu level, briefly press .

Corresponding

Left Softkey

Corresponding

Left Softkey selection

Right Softkey selection

Right Softkey

Page 22

End Key

The End key is used to turn on/off your phone, disconnect calls, and return to the standby mode.

• Press and hold the End key to turn on your phone.

• Briefly press once to disconnect a call.

• Press to return to standby mode from any menu, or to cancel the last input.

Send Key

The Send key is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed.

• Press once to answer calls.

• Enter a number and briefly press to make a call.

• Briefly press in standby mode to display a list of recent calls to and from your phone.

• Press twice in standby mode to call the most recent number.

• Press to pick up a waiting call.

Navigation Key

Use the directional keys on the Navigation key to browse menus, sub menus, and lists. Press the up or down navigation when jumping to highlighted links on the web.

Each key also acts as a shortcut to launch applications.

Page 23

Section 3: Call Functions 23

Section 3: Call Functions

Topics Covered

• Making a Call

• Answering a Call

• Recent Calls

• Call Time

• Data Volume

• Data Call Time

• Silent Mode

• Options During a Call

This section describes how to make or answer a call. It also includes the features and functionality associated with making or answering a call.

Making a Call

When the Idle screen displays, enter the area code and phone number, and press the

key.

Note: When you activate the Auto Redial option in the Voice Call menu, the phone will automatically redial up to 10 times when the person does not answer the call or is already on the phone.

Making an International Call

1. Press and hold the key. The + character appears.

2. Enter the country code, area code, and phone number, then press the

key.

Page 24

Correcting an Entered Number

Use the following steps to correct a mis-typed entry when dialing.

1. After entering a number

䢇 To clear the last digit displayed, press the key. 䢇 To clear another digit in the number, press the Left or Right Navigation key until

the cursor is immediately to the right of the digit to be cleared. Press the key.

䢇 To enter a missing digit press the Left or Right Navigation key until the cursor is

in position and enter the digit.

䢇 To clear the whole display, press and hold the key. The Idle screen displays.

2. Press the key to return to the Idle screen.

Ending a Call

When you want to finish your call, briefly press the key.

Redialing the Last Number

All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the number or caller is listed in your Address Book, the name associated displays.

To access the Recent Calls menu:

1. From the Idle Screen, press Menu. Use the navigation keys to highlight

Recent Calls and press Select.

2. Use the Up and Down Navigation keys to scroll through the Recent Calls

options. Choose from All Calls, Missed Calls, Calls Made, Calls Received, or Voice Mail.

3. From the Idle Screen, press the key to display a list of the most recent

numbers used in the order you dialed or received them.

4. Use the Up and Down Navigation keys to scroll through the numbers until

the number you want highlights.

5. To dial the number, highlight the number and press the key.

Making a Call from the Address Book

You can store phone numbers that you use regularly on the SIM card or in the phone’s memory. These entries are collectively called the Address Book.

Once you have stored a number in the Address Book, you can dial it by pressing a few keys using the Speed Dial feature.

For further details about the Address Book feature, see "Finding an Address Book Entry" on page 51.

Page 25

Section 3: Call Functions 25

Answering a Call

When a call is received the phone rings and displays the caller’s phone number, or name if stored in the Address Book.

1. From the Idle Screen press the key or the Accept soft key to answer

the incoming call.

If the Any key option in the Call Settings menu is activated, you can press any key to answer a call except for the key and the Reject soft key.

If the Active Flip option in the Call Settings menu is activated, you can answer the call simply by opening the phone.

Note: To reject an incoming call, press and hold the Volume keys on the left side of the phone before opening the phone. A quick press of side volume key silences the ringer on an incoming call.

2. End the call by closing the phone or by pressing the key.

Note: You can answer a call while using the Address Book or menu features. After ending the call, the phone

returns to the function screen you were using.

Recent Calls

The phone stores the numbers of the calls you’ve dialed, received, or missed in the Recent Calls menu. If the number or caller is listed in your Address Book, the associated name is displayed.

Viewing Missed Calls

The number of calls you have missed is displayed on both the Idle screen and the front panel LCD. To view the number details, use the following steps:

1. If the phone is closed, open the phone.

2. Press the View soft key. The most recently missed call is displayed.

Note: If there is a voicemail sent by the same number, associated icons display and can be selected.

3. To scroll through the list of missed calls, press the Up or Down Navigation

key.

4. To move to another call type, press the Left or Right Navigation key.

Page 26

Viewing the Details of a Missed Calls

To view the details of a selected missed call, use the following steps:

1. Press the View soft key. The most recently missed call is displayed.

2. To scroll through the list of missed calls, press the Up or Down Navigation

key.

3. With the missed call selected and press the Options soft key.

4. Use the Navigation keys to highlight Details and press the key.

Calling Back a Missed Call

To call back a missed call number, use the following steps:

1. Press the View soft key. The most recently missed call is displayed.

2. To scroll through the list of missed calls, press the Up or Down Navigation

key.

3. With the missed call selected and press the Options soft key.

4. Use the navigation keys to highlight Call Back and press the key.

Saving a Missed Call to your Address Book

To save the missed call entry to your address book, use the following steps:

1. Press the View soft key. The most recently missed call is displayed.

2. With the missed call selected and press the Options soft key.

3. Use the navigation keys to highlight Save contact to and press the key.

4. Select the location of your Address Book:

• Phone: This option allows you to save the missed number to your Address Book stored on the phone.

• SIM: This option allows you to save the missed number to your Address Book stored on the optional SIM card.

For further details about the Address Book feature, see "Adding a New Contact" on page 52.

Sending a Message to a Missed Call

To send a text message or attachment to a missed call entry, use the following steps:

1. Immediately after missing a call, press the View soft key.

2. Press the Options soft key and select Send Message. Press the Select

soft key, or the key.

3. At the “Create New Message” screen, press Down Navigation key.

Page 27

Section 3: Call Functions 27

Use the Alphanumeric keys to type in a message or press the Options soft

key to also Add Items such as an: Image, Sound, or Video.

5. When you are done with your message, press the Options soft key. Use the

navigation keys to highlight Send and press the key.

Deleting a Missed Call

To delete a missed call entry, use the following steps:

1. Immediately after missing a call, press the View soft key.

2. Press the Options soft key and select Delete. Press the Select soft key, or

the key.

3. At the “Delete?” prompt, press either the Ye s soft key to confirm deletion

or No to cancel.

You can press the key at any time to exit the Missed Call feature.

Call Time

1. From the Idle Screen, press Menu. Use the navigation keys to highlight

Recent Calls and press Select or the key.

2. Highlight Call Time from the Recent Calls menu and press the Select soft

key or the key.

3. The following options are available.

• Last Call Time: shows the length of time for the last call.

• Total Sent: shows the total length of time for the calls made.

• Total Received: shows the total length of time for the calls received.

4. Select the desired option, press the Reset soft key.

5. Enter the password and press the Confirm soft key to reset the selected

option.

6. Press the Back soft key or the key to end.

Data Volume

1. From the Idle Screen, press Menu. Use the navigation keys to highlight

Recent Calls and press Select.

2. Highlight Data Volume and press the Select soft key or the key. Data

Volume refers to the amount of data (volume) to and from the phone.

3. Use the Up and Down Navigation keys to view the following information:

• Last Sent Data: shows the size of the last data packet (measured in KB -

kilobytes) sent by the phone since the last time this counter was reset.

Page 28

•

Last Received Data: shows the size of the last data packet (measured in KB

- kilobytes) received by the phone since the last time this counter was reset.

• Total Sent Data: shows the size of the total data packet (measured in KB -

kilobytes) which have been sent by the phone since the last time this counter was reset.

• Total Received Data: shows the size of the total data packet (measured in

KB - kilobytes) which have been received by the phone since the last time this counter was reset.

4. Press the Back soft key or the key to end.

Data Call Time

1. From the Idle Screen, press Menu. Use the navigation keys to highlight

Recent Calls and press Select.

2. Highlight Data Call Time and press the Select soft key or the key.

3. The following options are available:

• Last Data Call: shows the time used for the last data call sent or received

since the last time this counter was reset.

• Total Data Call: shows the total time used to send or receive data since the

last time this counter was reset.

4. Press the Back soft key or the key to end.

Silent Mode

Silent mode is convenient when you wish to stop the phone from making noise, in a theater for example.

In Idle mode, press and hold the key until the phone vibrates, the “Silent Profile on” message appears on screen. Both the Silent mode and Vibrate icons are displayed on screen.

In Silent mode, your phone’s speakers are muted. The phone will vibrate and light up the external LCD display or just light the external LCD display depending on the settings of the Silent Phone Settings feature.

To exit and reactivate the previous sound settings, press and hold the key again until “Normal Profile on” displays. The Silent mode and Vibrate icons are no longer displayed.

Page 29

Section 3: Call Functions 29

Options During a Call

Your phone provides a number of control functions that you can use during a call.

Adjusting the Call Volume

During a call, if you want to adjust the earpiece volume, use the Volume keys on the left side of the phone.

Press the key to increase the volume level and the key to decrease the level.

In Idle mode, you can also adjust the ringer volume using these same keys.

Putting a Call on Hold

You can place the current call on hold whenever you want. You can also make another call while you have a call in progress if your network supports this service.

To put a call on hold:

1. While on a call, press the left Options soft key.

2. Highlight Hold and press the Select soft key. The call is on hold.

3. You can reactivate the call whenever you want, by pressing the Resume

soft key.

To make a call while you have a call in progress:

1. Place the current call on hold using the previous procedures.

2. Enter the new phone number that you wish to dial or look it up in the

Address Book.

3. Press the key to dial the second call. Once connected, both calls are

displayed on the screen.

When you have an active call and a call on hold, you may switch between the two calls, changing the one on hold to active and placing the other on hold.

To switch between the two calls:

1. Press the left soft key Options.

2. Highlight Swap and press the Select soft key. The current call (#2) is

placed on hold and the previous call on hold (#1) is reactivated so that you can continue conversing with that person.

3. Press the key to end the currently selected call.

Page 30

To end a call:

1. Press the left soft key Options.

2. Highlight End and press the Select soft key.

3. Highlight the call you wish to end (Active Call, Held Call, or All Calls) and

press the Select soft key.

4. Press the key to end the remaining call.

Using the Speakerphone Key

1. During a call, press the speakerphone key and then press the Yes soft

key to activate the speakerphone operation.

2. Use the volume keys (located on the left side of your phone) to adjust the

volume.

In Call Options

During a call, press the Options soft key to access the following:

• Whisper Mode ON/OFF: Increases the microphone sensitivity level so that you do not have to speak louder to be heard by the other party.

• Hold: Places the current call on hold.

• Mute Keypad Tone: Silences/mutes the key tones when on the call. To turn this feature off (unmute the keypad), return to this option and select Send Keypad Tone .

• New Call: Places the current call on hold and then allows you to enter and dial another number.

• Send Message: Allows you to create and send a new SMS message.

• Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you have selected. These DTMF tones are sent as a group. The DTMF tones are the tones used in phones for tone dialling, sounding when you press the number keys. This option is helpful for entering a password or an account number when you call an automated system, like a banking service.

• Address Book: Allows you to access your Address Book information.

• Add to Contacts: Allows you to add the currently phone number to your Contacts list on either your phone or SIM card.

• View Contact Details: Displays the Address Book entry information for this caller.

• Calendar: Allows you to temporarily access your calendar while still maintaining the current call active.

• Note: Allows you to associate a note with the current phone number.

• End Call: Allows you to end the current call.

Page 31

Section 3: Call Functions 31

If you have are in a multi-party call, the following options also display.

• Join: Joins all of the calls you have established with your phone (both active and

on hold).

• Swap: Places the current call on hold and then activates the previous call.

When you want to finish, end each call normally by pressing the key.

Muting or Sending Key Tones

These options allow you to turn the key tones off or on. If the Mute Key Tone option is selected, your phone does not transmit the DTMF (Dual Tone Multi-Frequency) tones of the keys, which allows you to press keys without hearing annoying key tones during a call.

Note: To communicate with answering machines or computerized telephone systems, the Send Keypad Tone option must be selected.

Switching off the Microphone (Mute)

You can temporarily switch your phone’s microphone off, so that the other person cannot hear you.

Example: You wish to say something to person in the room, but do not want the person on the phone to hear you.

During a call, to switch the microphone off temporarily:

1. Press the Mute. Unmute displays.

2. Press the Unmute to deactivate the Mute function.

Searching for a Number in Address Book

You can search for a number in Address Book during a call.

1. Press the Options soft key.

2. Press the Down key to highlight the Address Book option.

3. Press the Select soft key or the key.

4. Highlight the Address Book entry by using the Up or Down Navigation key.

- or -

5. Enter the first few letters of the contact into the Search field which then

highlights the closest match in the Address Book list.

6. To view the highlighted entry, press the View soft key.

For further details about the Address Book feature, see "Finding an Address Book Entry" on page 51.

Page 32

Call Waiting

The Call Waiting feature allows you to answer an incoming call while you have a call in progress, if this service is supported by the network, and you have set the Call Waiting-Voice Waiting Menu to Activate. You are notified of an incoming call by a call waiting tone.

To answer a call while you have a call in progress:

1. Press the key or the Accept soft key to answer the incoming call. The

first call is automatically put on hold.

2. To switch between the two calls, press the left Options soft key and

highlight Swap.

To end a call on hold:

1. Press the Options soft key or the key

2. Select the End Held Call option or press the key.

To end the current call, press the key.

Note: Join: Joins all of the calls you have established with your phone (both active and on hold). Swap: Places the current call on hold and then activates the previous call.

3-Way Calling (Party Line)

The 3-Way or Multi-Line feature allows you to answer a series of incoming calls, place them on hold, and if this service is supported by the network, and join all of the calls together. the Call Waiting-Voice Waiting Menu to Activate. You are notified of an incoming call by a call waiting tone.

To answer a call while you have a call in progress:

1. Press the key or the Accept soft key to answer the first incoming call.

2. Press the key or the Accept soft key to answer the consecutive

incoming calls. The previous call is then automatically put on hold.

3. To Join the first two calls, press the left Options soft key and highlight Join.

To end the current call, press the key.

Page 33

Section 4: Menu Navigation 33

Section 4: Menu Navigation

Topics Covered

• Menu Navigation

• Menu Outline

This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.

Menu Navigation

Menus and sub-menus can be accessed by scrolling through them using the Navigation keys or by using the shortcut keys.

Accessing a Menu Function by Scrolling

1. In Idle mode, press the Menu soft key to access Menu mode.

2. Scroll using the Navigation keys to reach a main menu, Settings for

example. Press the Select soft key or the key to enter the menu.

3. If the menu contains sub-menus, Phone Settings for example, you can

access them by first highlighting the option and then by pressing the Select soft key or the key. If the menu you have selected contains further options, repeat this step.

4. To scroll through these menus, press either the Up or Down Navigation key

or the Volume key (located on the left side of your phone). Press the Select soft key, or the key to make your selection.

5. To return to the previous menu level, press the Back soft key, the key.

6. To exit the menu without changing the settings, press the key.

Page 34

Using Shortcuts

Numbered menu items, such as menus, sub-menus, and options can be quickly accessed by using their shortcut numbers. In Menu mode, Main Menus can be accessed by pressing the number keys (1 to 0) corresponding to their location on the screen.

Example: Accessing the Language menu.

1. Press the Menu soft key.

2. Press the key for Settings.

3. Press the key for Phone Settings

4. Press the key for Language.

5. Press the key to display the list of available languages.

Menu Outline

The following list shows the menu structure and indicates the number assigned to each option.

1: Cingular Music

1: Music Player

1: All Music 2: Recent Music 3: Most Played Music

4: Downloaded Playlists 2: Shop Music 3: MusicID 4: Streaming Music 5: Music Video

1: Go to

2: Go

3: Reload

4: Desktop View

5: Page Size

6: Go to Homepage

7: Add to Favorites

8: View Favorites

9: Send URL

10: Enter URL

Page 35

Section 4: Menu Navigation 35

11: Copy URL 12: Save 13: Saved Pages 14: History

15: Advanced 6: The Buzz 7: Community

1: Go to

2: Go

3: Reload

4: Desktop View

5: Page Size

6: Go to Homepage

7: Add to Favorites

8: View Favorites

9: Send URL

10: Enter URL

11: Copy URL

12: Save

13: Saved Pages

14: History

15: Advanced 8: Music Apps

1: Go to

2: Go

3: Reload

4: Desktop View

5: Page Size

6: Go to Homepage

7: Add to Favorites

8: View Favorites

9: Send URL

10: Enter URL

11: Copy URL

12: Save

13: Saved Pages

14: History

15: Advanced

Page 36

2: Messaging

1: Create New Message

1: Add Recipients 2: Add Attachment 3: Back

2: Mobile Email

1: Yahoo! Mail 2: MSN Hotmail 3: AOL 4: AIM 5: AT&T Yahoo! 6: BellSouth

3: IM

1: AIM 2: MSN 3: Yahoo!

4: Inbox

1: View 2: Reply 3: Forward 4: Call Back 5: Delete 6: Move to Phone 7: Sort by 8: Add to Address Book

5: Sent

1: View 2: Forward 3: Delete 4: Move to SIM 5: Move to My Folder 6: Sort by

6: Outbox

1: Edit 2: Send Again 3: Delete 4: Sort by

Page 37

Section 4: Menu Navigation 37

7: Drafts

1: Edit

2: Send

3: Delete

4: Move to My Folder

5: Sort by 8: My Folder

1: My Folder 1

2: My Folder 2

3: My Folder 3 9: Templates

1: Text Templates

2: Multimedia Message Templates 10: Delete All

1: All

2: Inbox

3: Drafts

4: Outbox

5: Sent

6: My Folder 11: Message Settings

1: Text Message

2: Multimedia Message

3: Voice Mail

4: Push Message 12: Memory Status

3: Recent Calls

1: All Calls

1: Details

2: Call Back

3: Save contact to

4: Send Message

5: Delete

6: Add to Reject List

Page 38

2: Missed Calls

1: Details 2: Call Back 3: Send Message 4: Delete 5: Add to Reject List 6: View Address Book Details

3: Calls Made

1: Details 2: Call Back 3: Send Message 4: Delete 5: Add to Reject List 6: View Address Book Details

4: Calls Received

1: Details 2: Call Back 3: Send Message 4: Delete 5: Add to Reject List 6: View Address Book Details

5: Voice Mail

1: Connect to Voice Mail 2: Voice Server Number

6: Speed Dial

1: Add 2: View 3: Change 4: Remove 5: Voice Call

7: Delete All

1: All Calls 2: Missed Calls 3: Calls Made 4: Calls Received

8: Call Time

1: Last Call Time 2: Total Sent 3: Total Received

Page 39

Section 4: Menu Navigation 39

9: Data Volume

1: Last Sent Data

2: Last Received Data

3: Total Sent Data

4: Total Received Data 10: Data Call Time

1: Last Data Call

2: Total Data Call

4: MEdia Net

1: MEdia Net Home

1: Goto

2: Go

3: Reload

4: Desktop View

5: Page Size

6: Go to Homepage

7: Add to Favorites

8: View Favorites

9: Send URL

10: Enter URL

11: Copy URL

12: Save

13: Saved Pages

14: History

15: Advanced 2: Enter URL 3: Favorites

1: Cingular Video

2: Chat

3: News

4: Sports

5: Weather

6: MEdia Net 4: Saved Pages 5: History

1: Go to

2: Delete

3: Details

Page 40

6: Advanced

1: Clear Cache 2: Empty Cookies 3: Cookie Options 4: Preferences 5: About Browser

7: Browser Settings

1: MEdia Net wap1.x 2: MEdia Net wap2.x 3: Cingular MMS

5: Cingular Mall

1: Shop Tones 2: Shop Games 3: Shop Graphics 4: Shop Multimedia 5: Shop Applications 6: MEdia Net Home

6: Cingular Video

1: Go to 2: Go 3: Reload 4: Desktop View 5: Page Size

1: Large 2: Normal 3: Small

6: Go to Homepage 7: Add to Favorites 8: View Favorites 9: Send URL

1: As Message 2: Via Bluetooth

10: Enter URL 11: Copy URL

1: To Message

12: Save

1: Image 2: Web page

Page 41

Section 4: Menu Navigation 41

13: Saved Pages 14: History 15: Advanced

1: Clear Cache

2: Empty Cookies

3: Cookie Options

4: Preferences

5: Certificates

6: Page Details

7: Browser Settings

8: About Browser

7: My Stuff

1: Audio

1: Open

2: Record Audio

3: Create Folder

4: Copy

5: Sort by

6: Bluetooth Visibility

7: Properties 2: Graphics

1: Open

2: Take Photo

3: Create Folder

4: Copy

5: Sort by

6: Bluetooth Visibility

7: Properties 3: Video

1: Open

2: Record Video

3: Create Folder

4: Copy

5: Sort by

6: Bluetooth Visibility

7: Properties

Page 42

4: Music

1: Open 2: Create Folder 3: Copy 4: Sort by 5: Bluetooth Visibility 6: Properties

5: Games and Apps

1: Open 2: Create Folder 3: Sort by 4: Properties

6: Applications

1: Open 2: Create Folder 3: Sort by

7: Other Files

1: Open 2: Create Folder 3: Copy 4: Sort by 5: Bluetooth Visibility 6: Properties

8: Memory Status

8: Address Book

1: View 2: Add New Contact

1: Phone 2: SIM

3: Voice Call 4: Send Message 5: Edit 6: Duplicate 7: Delete

1: Selected 2: Multiple

Page 43

Section 4: Menu Navigation 43

8: Save to My Stuff 9: Send Name Card

1: As Message

2: Via Bluetooth 10: My Name Card

1: Input method

2: Input language

3: Add More Fields 11: Assign Speed Dial 12: Copy to Phone/SIM 13: Move to Phone/SIM 14: Service Number 15: FDN Contacts

1: Create FDN Contact 16: Copy to FDN Contacts 17: Print via Bluetooth 18: Address Book Settings

1: Speed Dial

2: Save New Contacts to

3: View Contacts from

4: Own Number 19: Memory Status

9: Settings

1: Profiles

1: Normal

2: Silent

3: Driving

4: Meeting

5: Outdoor

6: Airplane 2: Display Settings

1: Main Display

2: Front Display

3: Light Settings

Page 44

3: Time & Date

1: Time zone updating 2: Home Zone 3: Time 4: Date 5: Time Format 6: Date Format

4: Phone Settings

1: Language 2: Shortcuts 3: Own Number

5: Call Settings

1: All Calls 2: Voice Call 3: Data Call

6: Connectivity

1: Bluetooth 2: Connections 3: Select USB Mode

7: Software Update 8: Application Settings

1: Messaging Settings 2: Browser Settings 3: Camera Settings 4: Camcorder Settings 5: Media Player Settings 6: Cingular Video Settings 7: Record Audio Settings 8: Calendar Settings 9: Address Book Settings

9: Security

1: Phone Lock 2: SIM Lock 3: PIN Check 4: Lock Applications 5: FDN Mode 6: Change Phone Password 7: Change PIN Code 8: Change PIN2 Code

Page 45

Section 4: Menu Navigation 45

10: Reset Settings

1: All

2: Phone Settings

3: Display Settings

4: Profiles

5: Alarms 11: Memory Settings

1: Clear Memory

2: Memory Status 12: Phone Information

1: My Number

2: Manufacturer

3: Model

4: Device ID

5: Software Version

6: Language

7: Client Version

Page 46

Section 5: Entering Text

Topics Covered

• Changing the Text Input Method

• Using the T9 Input Method

• Using the Alphabet Input Method

• Using the Symbols Input Method

• Using the Numeric Input Method

This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the amount of key strokes associated with entering text.

Changing the Text Input Method

The Text Input option switches the key entry functions from an T9 Alphabet, ABC (Alphabet), Numeric Mode, and Symbols Mode.

T9 Input Method (T9 abc, T9 Abc, and T9 ABC)

This input method allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter; for example, pressing the 5 key can enter J, K, or L. However, the T9 method automatically compares the series of keystrokes you make with an internal linguistic dictionary to determine the most likely word, thus requiring far fewer keystrokes than the traditional Alphabet mode. The T9 abc method makes all characters lowercase. The T9 Abc method makes the initial character an uppercase while the remaining characters are left as lowercase. The T9 ABC method all characters uppercase.

ABC (Alphabet) Input Method (abc and ABC)

This input method allows you to enter letters by pressing the key labeled with the letter you want. Press the key once, twice, three, or four times until it displays. The abc method makes all characters of the word lowercase. The ABC method makes all characters of the word uppercase.

Numeric

This mode allows you to enter numbers.

Page 47

Section 5: Entering Text 47

Symbols

This mode allows you to enter symbols, such as punctuation marks.

Add word

This mode allows you to add new words to the phone’s current dictionary.

When you are in a field that allows characters to be entered (such as in a text message), you will notice the text input mode indicator on the display.

1. To change the text input mode, press the key.

2. Highlight Input Method and press the key. The default mode is Abc.

3. Choose from the following options:

ABC: abc (all lowercase) and ABC (all uppercase).

T9: T9 abc (completed words are all lowercase), T9 Abc (completed words

are initial uppercase) and T9 ABC (completed words are all uppercase).

Numeric: configures the keypad to be used only to enter numbers into a text message.

Symbols: provides an on screen table which allows you to select from the list of available symbols associated to each keypad.

Note: Press and hold the key to access Symbol mode. Press the number key corresponding to the symbol you want to enter. Use the Up and Down Navigation keys to scroll through the available symbols. Press the Cancel soft key to exit.

Using the T9 Input Method

T9 Predictive Text input method is based on a built-in dictionary.

Enter a Word in T9 Mode

1. In T9 method, begin entering a word by pressing the 2 to 9 keys. Press

each key only once for each letter. The built-in dictionary lists words that match the keystrokes you have entered.

2. Example: To enter “Hello”, press

, , , ,

The word that you are typing appears in the display. It may change with each key that you press.

3. Enter the whole word before editing or deleting the keystrokes.

4. When the word displays correctly, go to step 5.

Page 48

If the word doesn’t display correctly, press the key to display alternative word choices for the keys that you have pressed.

Example: Both “Of” and “Me” have the and keys. The phone displays the most commonly used choice first.

5. Insert a space by pressing the key and start entering the next word.

Add a New Word into the T9 Dictionary

1. After pressing the keys corresponding to the word you want to add, press

the key to display the alternative words.

2. When the last alternative word is displayed, Spell displays. Press the Spell

soft key.

3. Enter the word you want to add using the ABC mode.

4. Press the Add soft key or the key.

The word is added to the T9 dictionary and becomes the first word for the associated keypress series.

Note: This feature may not be available for some languages.

• To enter periods, hyphens, colons, or parenthesis, press the key. T9 mode applies grammar rules to ensure that correct punctuation is used.

• To shift case in T9 mode, use the key. There are 4 cases: Initial capital, Capital lock, Lower case, and Numeric.

• You can move the cursor by using the Left and Right keys. To delete letters, press the

key. Press and hold the key to clear the display.

Using the Alphabet Input Method

To use the ABC Alphabet input method use the to keys to enter your text.

1. Press the key labeled with the letter you want:

䢇 Once for the first letter 䢇 Twice for the second letter 䢇 And so on

2. Select the other letters in the same way.

Note: The cursor moves to the right when you press a different key. When entering the same letter twice or

a different letter on the same key, just wait for a few seconds for the cursor to move to the right automatically, and then select the next letter.

Page 49

Section 5: Entering Text 49

Keys

•

Using the Symbols Input Method

The Symbol input method enables you to insert symbols and punctuation marks into text.

1. To enter symbol mode press and hold the key.

2. Use the Navigation keys to select an on screen symbol group.

3. To select a symbol from that group, press the corresponding number key.

4. To clear the symbol(s), press the key. When the input field is empty,

this key returns the display to the previous mode.

5. To return to your message, press the OK soft key or the key.

Using the Numeric Input Method

The Numeric mode enables you to enter numbers into a text message. Press the keys corresponding to the digits you want to enter.

Page 50

Section 6: Understanding Your Address Book

Topics Covered

• Using Contact List

• Address Book Entry Options

• Adding a New Contact

• Dialing a Number from the SIM Card using the Location Number

• Speed Dial

• Finding My Own Phone Number

•FDN Mode

• Group Settings

• Managing Address Book Entries

This section allows you to manage your daily contacts by storing their name and number in your Address Book. Address Book entries can be sorted by name, entry, or group.

Notes: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot location are saved. To save additional information for a particular contact, such as notes, e-mail, dates, etc.., it is important to save that Contact into your phone’s onboard memory.

Using Contacts List

Dialing a Number from Address Book

Once you have stored phone numbers in the Address Book, you can dial them easily and quickly by either using their SIM card location number or by using the Search field to locate the entry.

Note: The default Address Book entries are: Check Bill Balance - *225#, Directory Assistance - 411, Music ID - #43, Pay My Bill - *729, View My Minutes - *646#, Voice Connect - *08, *Now - *669.

Page 51

Section 6: Understanding Your Address Book 51

Finding an Address Book Entry

You can store phone numbers and their corresponding names onto your SIM card and phone’s onboard memory. They are physically separate but are used as a single entity, called the Address Book.

Depending on your particular SIM card, the maximum number of phone numbers the SIM card can store may differ.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Address Book, and press the Select soft key or the key.

3. Enter the first few letters of the name.

The Address Book entries are then listed, starting with the first entry matching your input.

4. To select a different entry, press the Up or Down Navigation key until the

entry you want is highlighted.

5. Once you have found the entry, press the key to dial the number, or

press the Options soft key to access the Address Book entry options.

Address Book Entry Options

While accessing any Address Book entry, press the Options soft key to use the options for the entry.

The following options are available:

• View: provides you with details about that contact entry. Press the Back soft key

to return to the Address Book listing.

• Add New Contact: allows you to add a new entry to either your Phone or SIM card.

• Voice Call: allows you to call a currently selected entry.

• Send Message: allows you to send a text message or a multimedia message to the

selected entry.

•

Edit: allows you to edit the properties of an entry such as: Name, Category, Group,

or location.

Press the key to save your changes.

•

Duplicate: allows you to duplicate a selected entry. Press the key to save your

duplicate entry.

•

Delete: allows you to delete either a selected address book entry or multiple entries

from a target location such as the Phone and/or SIM card.

•

Save to My Stuff: allows you to copy the contact information from its current

location to your My Stuff folder.

• Send Name Card: allows you to send a message to the selected entry which

contains the information from their Address Book entry which you have on file. This can be sent as either a message or via Bluetooth.

Page 52

•

My Name Card: allows you to send a name card message to the selected entry. This

name card contains your name cards with your number and profile.

•

Assign Speed Dial: allows you to set the speed dial key for this entry.

• Copy to Phone/SIM: allows you to copy the contact information from the SIM to

the phone or from your phone to your SIM.

• Move to Phone/SIM: allows you to move the contact information from the SIM to

the phone or from your phone to your SIM.

• Service Number: allows you to search through your address book listings of saved

service numbers.

• FDN Contacts: Fixed Dialling Number mode restricts your outgoing calls to a

limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored on the SIM FDN list.

• Copy to FDN Contacts: allows you to copy the list of restricted phone numbers

from your phone to the FDN section of the SIM card.

• Print via Bluetooth: allows you send the selected contact entry information to a

Bluetooth compatible printer.

• Address Book Settings: allows you to access the address book settings menu

list.

• Memory Status: allows you to view the amount of memory allocation for the

following categories: Phone, USIM, Additional No.1 (SIM card), Additional No.2, Email, and FDN.

Adding a New Contact

Use the following procedures to store a new contact to your Phone or SIM Card.

Storing a Number in the Phone’s Memory

1. When the Idle screen displays, enter the phone number.

2. Press the Options soft key.

3. Scroll to Add to Contacts by pressing the Up or Down key and press the

Select soft key or the key.

4. Choose the target location for the entry (Phone or SIM), press the Select

soft key or the key.

5. Press the Select soft key or the key to assign this number as a New

entry.

Page 53

Section 6: Understanding Your Address Book 53

From the Select Type screen, select from the following category types:

• Mobile - Private: assigns the number entered as a Private Mobile entry.

• Mobile - Business: assigns the number entered as a Business Mobile entry.

• Landline - Private: assigns the number entered as a Private Landline entry.

• Landline - Business: assigns the number entered as a Business Landline

entry.

• FAX: assigns the number entered as a Fax entry.

• Etc.: allows you to classify the entry as a miscellaneous type.

7. Enter alphanumeric characters into each of the available fields:

䢇 First Name: allows you enter a first name for this entry. 䢇 Last Name: allows you enter a Last name for this entry. 䢇 Display Name: allows you enter a display name for this entry which then

appears when you receive a call from this contact.

䢇 Phone Number: allows you keep or alter the currently entered phone number. 䢇 Number Type: allows you to enter an additional landline-private number to this

entry.

䢇 Contact E-mail: allows you to enter a contact E-mail address for this entry. 䢇 Group: allows you to assign this contact to group. Press the Options soft key to

display available groups. Use the Up or Down Navigation keys to select a group. Press the Select soft key or the key to save your selection.

䢇 Caller ID: allows you to set a graphic to the Caller ID for this contact. Press the

Options soft key or the key to access the My Stuff menu.

䢇 Ringtone: allows you to choose a ringtone for this contact information. Press the

Options soft key or the key to access the My Stuff menu.

䢇 Instant Messaging: allows you to assign an Instant Message profile to this

entry. Press the key to access the IM menu.

䢇 Note: allows you enter notes associated with this contact.

8. Press the Options soft key or the key to save the information for this

entry.

Page 54

Storing a Number in the SIM Card

Notes: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot

location are saved. To save additional information for a particular contact, such as notes, e-mail, dates, etc.., it is important to save that Contact into your phone’s onboard memory.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Address Book, and press the Select soft key or the key.

3. Select the Address Book entry you wish to add and press the Options soft

key.

4. Scroll to Add New Contact by pressing the Up or Down key and press the

Select soft key or the key.

5. Select SIM and press the Select soft key or the key.

6. Enter the following information for the New Contact.

䢇 Name: allows you to enter a name for the number entered. 䢇 Phone Number: assigns the number entered to the Mobile entry. 䢇 Location: allows you to assign a location number on your SIM for the number

being entered.

7. Press the key to save your new entry and return to a screen which then

lists the details of your new entry onto the SIM.

8. To view available options for this entry, press the Options soft key:

䢇 Edit: allows you to edit the properties of an entry such as: Name, Number, or

Location. Press the key to save your changes.

䢇 Voice Call: allows you to call a currently selected entry. 䢇 Send Message: allows you to send a text message or a multimedia message to

the selected entry.

䢇 Duplicate: allows you to duplicate a selected entry. Press the key to save

your duplicate entry.

䢇 Delete: allows you to delete the currently selected address book entry from a

target location.

䢇 Save to My Stuff: allows you to copy the contact information from its current

location to your My Stuff folder.

䢇 Send Name Card: allows you to send a message to the selected entry which

contains the information from their Address Book entry which you have on file. This can be sent as either a message or via Bluetooth.

䢇 Copy to Phone: allows you to copy the contact information from the SIM to the

phone or from your phone to your SIM.

䢇 Move to Phone: allows you to move the contact information from the SIM to the

phone or from your phone to your SIM.

Page 55

Section 6: Understanding Your Address Book 55

䢇 Copy to FDN Contacts: allows you to copy the restricted phone number list to

the FDN section of the SIM card.

䢇 Print via Bluetooth: allows you send the selected contact entry information to a

Bluetooth compatible printer.

9. To return to the Idle screen, press the key.

Dialing a Number from the SIM Card using the Location Number

1. In Idle mode, enter the location number for the phone number you want to

dial and press the key.

The contact entry information is displayed.

2. Press the Up or Down Navigation key to find other numbers on the list.

3. Press the Call soft key, the key, or the key when you have selected

the number you want to call.

Speed Dial

Once you have stored phone numbers from your Address book list, you can set up to 8-speed dial entries and then dial them easily whenever you want, simply by pressing the associated numeric key.

In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the appropriate key.

Setting Up Speed Dial Entries

1. When the Idle screen displays, press the Options soft key.

2. Highlight Speed Dial List by pressing the Up or Down Navigation key, and

press the Select soft key or the key.

3. Select the key in which you wish to assign the speed-dialing number (from

the 2 to 9 keys), and press the Options soft key or the key.

Note: Memory location 1 is reserved for your Voice mail server number.

4. Highlight Add and press the Select soft key or the key. You can choose

to assign a number from your Address Book or FDN contacts.

5. Highlight Address Book and press the Select soft key or the key.

䢇 Select the Address Book entry you would like to add by pressing the Up or Down

key and press the Select soft key or the key to save the entry.

6. Highlight FDN Contacts and press the Select soft key or the key.

䢇 Select the FDN entry you would like to add by pressing the Up or Down key and

press the Select soft key or the key to save the entry.

Page 56

Changing a Number Assigned to a Key

1. When the Idle screen displays, press the Options soft key.

2. Highlight Speed Dial List by pressing the Up or Down Navigation key, and

press the Select soft key or the key.

3. Select the key you wish to change and press the Options soft key.

4. Press Change, select the location of the new entry (Address Book or FDN

Contacts), and press the Select soft key or the key.

5. Use either steps 5 or 6 from the previous section to add the Address Book

or FDN Contacts entry.

6. Once you’ve selected your entry (by name or number), press the Select soft

key or the key to confirm the change.

7. After the “Change Speed Dial?” screen appears, press the Yes soft key to

save the new speed dial entry and overwrite the previous information.

8. When you are finished, press the key to return to Idle mode.

Deleting Speed Dial Entries

1. When the Idle screen displays, press the Options soft key.

2. Highlight Speed Dial List by pressing the Up or Down Navigation key, and

press the Select soft key or the key.

3. Select the key you wish to clear and press the Options soft key.

4. Select Remove and press the Yes soft key to confirm your deletion.

5. When you are finished, press the key to return to Idle mode.

Finding My Own Phone Number

This function is a memory aid, which you can use to check your own phone number if you need to do so.

You can assign a name to each of your own phone numbers registered on your SIM card. You can also edit the names and numbers. Any changes made here do not in any way affect the actual subscriber numbers on your SIM card.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Settings, press the Select soft key or the key.

3. Select Phone Information by pressing the Up or Down key and press the

Select soft key or the key.

Page 57

Section 6: Understanding Your Address Book 57

FDN Mode

FDN (Fixed Dialing Number) mode, if supported by your SIM card, restricts your outgoing calls to a limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored in the FDN list on the SIM card.

The following options are available:

• Disable: you can call any number.

• Enable: you can only call the phone numbers stored in the SIM FDN list.

You must enter your PIN2 password.

Group Settings

Editing a Caller Group

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Address Book, press the Select soft key or the key.

3. Scroll to Groups by pressing the Right Navigation key.

4. Scroll through the list of groups by pressing the Up or Down Navigation

key.

5. Highlight the target group entry and press the Options soft key.

6. Highlight Group Settings, press the Select soft key or the key.

The following options are then available:

• Picture: allows you to view the assigned group image.

• Ringtone: allows you to set the ringtone associated with this group. Choose

from the Default Ringtones or from the Downloaded Ringtones.

7. Once you’ve made your changes, press the Options soft key, select Save

and press the Select soft key or the key.

8. When you are finished, press the key to return to Idle mode.

Page 58

Managing Address Book Entries

You can copy, delete, and view the memory status for the Phone and SIM entries on your phone.

Copying an Entry to the Phone

You can copy a SIM entry to the Phone by using the Duplicate option. When you copy entries to the phone, duplicate entries are created.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Address Book, press the Select soft key or the key.

3. Select an entry which currently resides on the phone.

䢇 If the entry’s associated Group graphic has a SIM location icon on it, then the entry

already exists on the SIM card. This is the type you can duplicate.

䢇 If the entry’s associated Group image does not have a SIM location icon, then this

entry currently also exists on the phone.

4. Press the Options soft key, highlight Copy to Phone, and press the Select

soft key or the key.

5. When you are finished, press the key to return to Idle mode.

Note: Options are available for phone entries that are not available when stored to the SIM card. For details

see "Storing a Number in the Phone’s Memory" on page 52.

Deleting All of the Address Book Entries

You can delete All, Phone, SIM, and SIM (FDN) entries from your phone’s memory.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Address Book, press the Select soft key or the key.

3. Press the Options soft key, highlight Delete, and press the Select soft key

or the key.

4. Highlight Multiple, press the Select soft key or the key.

5. Choose the location of the Address Book entries you wish to delete (Phone,

SIM, or Phone & SIM), press the Select soft key or the key.

6. Highlight All and press the key.

You can remove the check mark by pressing the key again. Selecting All places a checkmark adjacent to every entry in the list.

7. Press the Delete soft key to delete the entries from the selected memory

location.

Page 59

Section 6: Understanding Your Address Book 59

At the Delete? confirm screen, press the Yes soft key to continue, or the No

soft key to cancel.

9. Enter the password and press the Confirm soft key or the key.

10. When you are finished, press the key to return to Idle mode.

Checking the Memory Status

You can check how many names and numbers are stored in the Address book, in both SIM card and the phone memory. You can also see the capacity of both memories.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Address Book, press the Select soft key or the key.

3. Press the Options soft key.

4. Select Memory Status by pressing the Up or Down Navigation key and

press the Select soft key or the key.

5. When you are finished viewing your phone’s Memory Status, press the

key to return to Idle mode.

Using the Service Dialing Numbers

You can view the list of Service Dialing Numbers (SDN) assigned by your service provider. These numbers include emergency numbers, customer service numbers and directory inquiries.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Address Book, press the Select soft key or the key.

3. Press the Options soft key.

4. Select Service Number, by pressing the Up or Down Navigation key and

press the Select soft key or the key.

5. Scroll through the numbers by using the Up or Down Navigation key.

6. To dial the number displayed, press the key.

Note: This menu is available only when your SIM card supports Service Dialing Numbers.

Page 60

Section 7: Messaging

Topics Covered

• Types of Messages

• Creating and Sending New Messages

• Text Messages

• Retrieving New Messages

• Using Message Options

• Using Instant Messenger (IM)

• Signing into your IM Account

• Signing into your Mobile Email

• Using Message Templates

• Deleting Messages

• Messaging Settings

• Memory Status

This section describes how to send or receive different types of messages. It also includes the features and functionality associated with messaging.

Types of Messages

Your phone provides the following message types:

• IM Messages

• Text Messages

• Multimedia Messages

Creating and Sending New Messages

Text Messages

The Short Message Service (SMS) allows you to send and receive short text messages to and from other mobile phones. To use this feature, you must subscribe to your service provider’s message service.

Page 61

Section 7: Messaging 61

The Message icon ( ) displays when you have received new text messages. When the memory is full, an error message displays and you cannot receive any new messages. Use the Delete option in each message box to delete obsolete messages.

1. When the Idle screen displays, press the Menu soft key.

2. Select Messaging and press the Select soft key or the key.

3. Using the Up or Down Navigation key, highlight Create New Message and

press the Select soft key or the key.

4. Enter either a phone number or contact a contact name (from your Address

Book) by pressing the key to access both a list of recent calls and your Address Book Contacts and Groups.

䢇 Recent Log: allows you to choose from a brief list of recently dialed

phone numbers. Press the key to add a selected number to your message’s recipients list field. This entry can later be appended prior to sending the message.

䢇 Contacts: allows you to insert additional recipients from your Address

Book by using your Up and Down Navigation keys to select those entries you wish to add.

䢇 Press the key to place a checkmark next to those entries. 䢇 Once you have selected the desired entries, press the Add softkey to return to

the message.

䢇 Groups: allows you to insert additional Group members from your

Address Book by using your Up and Down Navigation keys to select those entries you wish to add.

5. Use the Down Navigation key to access the text field and begin creating

your text message.

6. When you have finished writing your message, press the Options soft key.

Choose from the following options:

• Send: allows you to send the message.

• Tex t: allows you to return to your text message and cut, copy, or remove

selected text.

• Add Item: allows you to add an image, sound or video clip to your message.

• Create Item: allows you to temporarily exit from the current text message

and create either a new photo, video clip, or audio clip for your current text message.

䢇 Take Photo: allows you to temporarily exit the message, take a photo with

phone’s camera, and then add it to your message.

䢇 Record Audio: allows you to temporarily exit the message, record an audio clip

using the phone’s microphone, and then add it to your message.

䢇 Record Video: allows you to temporarily exit the message, record a video clip

using the phone’s camera, and then add it to your message.

Page 62

•

Insert: allows you to insert a predefined Text template, Text emoticon, Name

card, or favorite web address into the message.

䢇 Tex t Te mp late: allows you to insert one of the preset message templates to the

text, such as (Out of Office, I’m in a meeting..).

䢇 Tex t E mo ti con: allows you to add an a emotion (created by phone characters) to

your message. An example would be:

which creates a :-) “happy face”.

䢇 Name Card: allows you to add the contact information for an entry from Address

Book directly to your message.

䢇 Favorites: allows you to add a web address from your Favorites list of Internet

sites to the message.

• Add Recipients: allows you to update the recipient list by appending it with

information form either your Recent Log, Contacts list, or Groups entries.

• Change to Multimedia Message: allows you to convert the current

message to/from either a text or multimedia message prior to being sent.

Note: A multimedia message should only be sent to a phone which can support the receipt and display of this message type.

• Input Language: allows you to temporarily change the input language used

to create your message.

• Input Method: allows you to change the method used to input data into your

message, such as text, numbers, and symbols. For more information, refer to "Section 5: Entering Text" on page 46.

• Add Attachment: allows you to add either a file, card, or other information

such as a calendar entry, task, or note.

䢇 File: allows you to insert an audio, graphic, or video clip to your message as an

attached file.

䢇 Name Card: allows you to insert the contact information for an entry from

Address Book directly to your message as an attached file.

䢇 Appointment: allows you to insert an Appointment entry from your calendar

directly to your message as an attached file.

䢇 Anniversary: allows you to insert an Anniversary entry from your calendar

directly to your message as an attached file.

䢇 Private: allows you to insert a Private entry from your calendar directly to your

message as an attached file.

䢇 Holiday: allows you to insert a Holiday entry from your calendar directly to your

message as an attached file.

䢇 Important: allows you to insert an entry from your calendar tagged as Important

directly to your message as an attached file.

䢇 Ta sk : allows you to insert an entry from your calendar tagged as a Task directly to

your message as an attached file.

Page 63

Section 7: Messaging 63

䢇 Note: allows you to insert a presaved Note (text) directly to your message as an

attached file.

䢇 Favorites: allows you to add a web address from your Favorites list of Internet

sites as an attachment to the message.

• Sending Options: allows you to configure the options associated with

sending the message.

• Save to Drafts: saves the current message to the Drafts folder.

• Save as Template: allows you to save the current text message to the

current list of preset message templates, such as (Out of Office, I’m in a meeting..).

• Back: allows you to return to the active message.

7. Press the Send To soft key, confirm the recipient(s). You can add additional

recipients from you Address Book by selecting one of the Empty fields and pressing the key.

䢇 Add the additional recipients from your Address Book by then using your Up and

Down Navigation keys to select those entries you wish to add.

䢇 Press the key to place a checkmark next to those entries. 䢇 Once you have selected the desired entries, press the Add softkey to return to the

previous list of Recipients.

8. Send the message to the selected recipients by either pressing the Send

soft key or the key.

Multimedia

The Multimedia Message icon ( ) displays when you have received new multimedia messages. When the memory is full, an error message displays and you cannot receive any new messages. Use the Delete option in each message box to delete obsolete messages.

1. When the Idle screen displays, press the Menu soft key.

2. Select Messaging and press the Select soft key or the key.

3. Using the Up or Down Navigation key, highlight Create New Message and

press the Select soft key or the key.

4. Enter either a phone number or contact a contact name (from your Address

Book) by pressing the key to access both a list of recent calls and your Address Book Contacts and Groups.

䢇 Recent Log: allows you to choose from a brief list of recently dialed

phone numbers. Press the key to add a selected number to your message’s recipients list field. This entry can later be appended prior to sending the message.

Page 64

䢇 Contacts: allows you to insert additional recipients from your Address

Book by using your Up and Down Navigation keys to select those entries you wish to add.

䢇 Press the key to place a checkmark next to those entries. 䢇 Once you have selected the desired entries, press the Add softkey to return to

the message.

䢇 Groups: allows you to insert additional Group members from your

Address Book by using your Up and Down Navigation keys to select those entries you wish to add.

5. Use the Down Navigation key to access the text field and begin creating

your message.

6. Press the Options soft key, highlight the Change to Multimedia Message

and press

the Select soft key or the key.

7. At the “Change message type to Multimedia Mesasage?” pop-up, press

the Yes soft key. This converts the message type from a text-based message to a multimedia compatible message type.

Notes: A multimedia message should only be sent to a phone which can support the receipt and display of this message type.

8. Add an Image, Sound, or Video clip directly into your message by pressing

the Options soft key and selecting from one of the following options:

• Send: allows you to send the message.

• Preview: allows you to preview your message prior to being sent.

• Text : allows you to enter, cut, copy, and remove text from your message

prior to being sent.

• Add Item: allows you to add an image, sound or video clip to your message.

• Create Item: allows you to temporarily exit from the current text message

and create either a new photo, video clip, or audio clip for your current text message.

䢇 Take Photo: allows you to temporarily exit the message, take a photo with

phone’s camera, and then add it to your message.

䢇 Record Audio: allows you to temporarily exit the message, record an audio clip

using the phone’s microphone, and then add it to your message.

䢇 Record Video: allows you to temporarily exit the message, record a video clip

using the phone’s camera, and then add it to your message.

• Insert: allows you to insert a predefined Text template, Text emoticon, Name

card, or favorite web address into the message.

䢇 Tex t Te mp late: allows you to insert one of the preset message templates to the

text, such as (Out of Office, I’m in a meeting..).

Page 65

Section 7: Messaging 65

䢇 Text E mot ico n: allows you to add an a emotion (created by phone characters) to

your message. An example would be:

which creates a :-) “happy face”.

䢇 Name Card: allows you to add the contact information for an entry from Address

Book directly to your message.

䢇 Favorites: allows you to add a web address from your Favorites list of Internet

sites to the message.

• Add Recipients: allows you to update the recipient list by appending it with

information form either your Recent Call Log, Contacts list, or Group entries.

• Change to Text Message: allows you to convert the multimedia message

back to a text-based message which can contain multimedia files as attachment and not as part of the main body of the message.

• Add Page: allows you to add a text page to your multimedia message.

• Input Language: allows you to change the language used for the message

text.

• Input Method: allows you to change the method used to input data into your

message, such as text, numbers, and symbols. For more information, refer to "Section 5: Entering Text" on page 46.

• Edit Style: allows you to edit the style of your outgoing message with option

such as: Select page, Background Color, Page Duration (for embedded media), Font Color, and Font Style.

• Add Subject: allows you to add a subject header to your multimedia

message.

• Add Attachment: allows you to add either a file, card, or other information

such as a calendar entry, task, or note.

䢇 File: allows you to insert an audio, graphic, or video clip to your message as an

attached file.

䢇 Name Card: allows you to insert the contact information for an entry from

Address Book directly to your message as an attached file.

䢇 Appointment: allows you to insert an Appointment entry from your calendar

directly to your message as an attached file.

䢇 Anniversary: allows you to insert an Anniversary entry from your calendar

directly to your message as an attached file.

䢇 Private: allows you to insert a Private entry from your calendar directly to your

message as an attached file.

䢇 Holiday: allows you to insert a Holiday entry from your calendar directly to your

message as an attached file.

䢇 Important: allows you to insert an entry from your calendar tagged as Important

directly to your message as an attached file.

䢇 Tas k: allows you to insert an entry from your calendar tagged as a Task directly to

your message as an attached file.

Page 66

䢇 Note: allows you to insert a presaved Note (text) directly to your message as an

attached file.

䢇 Favorites: allows you to add a web address from your Favorites list of Internet

sites as an attachment to the message.

• Sending Options: allows you to configure the options associated with

sending the message.

• Save to Drafts: saves the current message to the Drafts folder.

• Save as Template: allows you to save the current text message to the

current list of preset message templates, such as (Out of Office, I’m in a meeting..).

• Back: allows you to return to the active message.

9. Press the Send To soft key, confirm the recipient(s). You can add additional

recipients from you Address Book by selecting one of the Empty fields and pressing the key.

䢇 Add the additional recipients from your Address Book by then using your Up and

Down Navigation keys to select those entries you wish to add.

䢇 Press the key to place a checkmark next to those entries. 䢇 Once you have selected the desired entries, press the Add softkey to return to the

previous list of Recipients.

10. Send the message to the selected recipients by either pressing the Send

soft key or the key.

Retrieving New Messages

While text messages from other phones are delivered directly to your phone, Multimedia messages will be stored in the Inbox of the message server and the server will alert you to new messages. Therefore you need to retrieve new messages to your phone and read them on the phone.

Locating a Message

1. In Idle mode, press the Menu soft key and highlight Messaging. Press the

Select soft key or the key.

2. Highlight Inbox and press the Select soft key. The message list opens.

The icons on the left of the number indicates the message type.

䢇 : indicates a new Voice message 䢇 : indicates a new Text message 䢇 : indicates a new Multimedia message 䢇 : indicates a new E-mail message

Page 67

Section 7: Messaging 67

Retrieving a Text Message

When a new Text message comes in, the display (in Idle mode) shows a new Message notification icon ( ) along with the available sender’s information.

1. Press the View soft key to launch the Inbox list of message.

2. Use the Up or Down Navigation keys to select the message.

3. Press the key to open the message.

4. When you have finished, press the key.

Retrieving an Multimedia Message

When a new Multimedia message comes in, the display shows the Multimedia Message icon ( ) and a text notification along with the sender’s number.

1. Use the Left or Right Navigation keys to select a message from the list.

2. Press the Options soft key, highlight Properties, and press the Select soft

key or the key to view brief information about the message, such as the sender’s number, the message size, and the subject. If you want to view the message later in the Inbox, press the Back soft key.

3. To view the message, highlight View, and press the Select soft key or the

key.

4. To play the multimedia message, press the key.

䢇 To pause the audio/video clip, press the key. 䢇 To stop the audio/video clip press the Stop soft key.

5. To scroll through the message (if additional text page have been added),

press the Up or Down key.

6. When you have finished, press the key.

Note: Messages can also be accessed by navigating to your Inbox (Menu > Messaging).

Page 68

Using Message Options

While viewing the content of a message, press the Options soft key to access the following message options:

Options for SMS Messages

• Reply: allows you to reply to the message via Text message.

•

Forward: allows you to forward the message.

•

Call Back: allows you to dial the originating message number.

•

Delete: deletes the message.

•

Move to Phone/Move to SIM: If a message is stored in the SIM card, it is saved to

the phone’s memory. If a message is stored in the phone’s memory it is then saved to the SIM card.

•

Move to My Folder: moves the message to the phone’s My Folder location.

•

Add to Address Book: allows you to save the recipient or sender’s information from

the message to your Address Book on either the Phone or SIM.

• Print via Bluetooth: allows you to print the content of the text message wirelessly to a target Bluetooth-compatible printer.

•

Lock: allows you to lock the message from tempering when the message is saved in

memory.

Options for Multimedia Messages

• Play: allows you play the multimedia message.

• Reply: allows you to reply to the message.

•

Reply to All: allows you to reply to the all recipients of the message.

•

Forward: allows you to forward the message to another person.

•

Call Back: allows you to call the sender of the message.

•

Delete: allows you to delete the message.

• Move to My Folder: moves the message to the phone’s My Folder location.

•

Save as Template: saves to the message as a template for this message type. This

template can be used to save time during the creation of the next similar message.

•

Save Items: saves the multimedia content to the My Stuff - Graphics folder.

•

Add to Address Book: allows you to save the recipient or sender’s information from

the message to your Address Book on either the Phone or SIM.

Page 69

Section 7: Messaging 69

•

Print via Bluetooth: allows you print the contents of the message on a Bluetooth

compatible printer.

•

Lock: locks the message by using the phone’s password to access the contents.

•

Properties: displays some of the file properties for the message such as: sender,

date/time, file size, priority, etc..

Using Instant Messenger (IM)

The Instant Messaging function allows you to send and receive instant messages using AIM, MSN, and Yahoo communities. You must first create a default community account before accessing it on your phone. To access your default community session settings, use the following steps:

Default Community Settings

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Messaging, and press the Select soft key or the key.

3. Select IM and press the Select soft key or the key.

4. Select Settings and press the Select soft key or the key.

5. Select Choose Your Community and press the Select soft key or the

key. This is the service that will load when you press the IM soft key.

6. Use the Navigation keys to highlight your option, and press the Select soft

key or the key to save your selection.

Signing into your IM Account

Although each account type differs, the initial sign in procedure is common to all supported types. Before beginning the sign in procedure, you must complete the previous procedures for selecting your default IM Community.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Messaging, and press the Select soft key or the key.

3. Select IM and press the Select soft key or the key.

4. Select Sign In/On and press the Select soft key or the key.

5. Use the Navigation keys to select each log in field and then use the keypad

to enter the appropriate information.

6. Press the Options soft key. Highlight Sign In and press the Select soft key

or the key.

Page 70

Signing into your Mobile Email

Take your email with you! With Mobile Email you can check your Yahoo!® Mail, AOL®, MSN

Hotmail, AT&T Yahoo!®, BellSouth, and AIM quickly and easily from the a707.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Messaging, and press the Select soft key or the key.

3. Select Mobile Email and press the Select soft key or the key.

4. Use the Navigation keys to select an e-mail carrier of your choice and press

the Select soft key or the key.

5. Use the Navigation keys to select which domain your personal account uses

(e.g., "@hotmail.com") and press the Select soft key or the key.

6. Type in your personal Email address (e.g., "silverfox2"), then enter your

account's Password and press the Sign In soft key. You will be connected to your account's Inbox and contacts, where you can send and receive emails.

Using Message Templates

Your phone has message templates (both SMS and MMS) which allows you to retrieve them when creating a message. You can change the templates as your preferences or send a message immediately.

1. When the Idle screen displays, press the Menu soft key.

2. Select Messaging and press the Select soft key or the key. Highlight

Templates and press the Select soft key or the key.

3. Highlight a template type (Text or Multimedia) and press the Select soft key

or the key.

4. Use the Up or Down Navigation Keys to select a current template message

and press the Options soft key to access the following options:

䢇 Send: allows you to send an SMS and MMS message using the template. 䢇 Add New: allows you to add a new the template. 䢇 Edit: allows you to change the currently selected template. 䢇 Delete: deletes the currently selected template.

5. When you have finished, press the key.

Page 71

Section 7: Messaging 71

Deleting Messages

You can delete the messages in each message folder(s) individually or all at one time. You can also delete all of your messages at one time.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Messaging, and press the Select soft key or the key.

3. Highlight Delete All and press the Select soft key or the key.

4. Using the Up or Down Navigation key to select the message folder(s) you

want to empty.

5. Press the key to mark the folder you want to delete.

䢇 All: allows you select all of the list items and mark each one for content deletion. 䢇 Inbox: allows you select the your Inbox folder and mark its files for deletion. 䢇 Drafts: allows you select the your Drafts folder and mark its files for deletion. 䢇 Outbox: allows you select the your Outbox folder and mark its files for deletion. 䢇 Sent: allows you select the your Sent folder and mark its files for deletion. 䢇 My Folder: allows you select the your My Folder and mark its files for deletion.

To view the contents in each folder, use the Right key to display the folder’s contents or use the Left key to close the folder’s contents.

To delete all of the messages in all folders, select All.

6. Press the Delete soft key. At the “Delete?” pop-up, press the Yes soft key

or the key to delete.

7. When you have finished, press the key.

Messaging Settings

You can set up various options for using messaging services.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Messaging, and press the Select soft key or the key.

3. Highlight Messaging Settings and press the Select soft key or the

key.

4. Select the type of messages for which you want to change.

䢇 Text Message 䢇 Multimedia Message 䢇 Voice Mail 䢇 Push Message

5. Press the Select soft key or the key.

Page 72

Text M essa ge

The following options are available:

• Sending Options: allows you to set the following options:

䢇 Keep a Copy: allows you to keep a copy of your sent messages.

• Text Message Center Settings: allows you to set the default method of text message transmission used by the Text Message Center. The options are:

䢇 SMS Settings: allows you to configure the text delivery parameters used when

sending this type of message.

䢇 Email Settings: allows you to configure the Email parameters used when

sending this type of message.

䢇 Empty: allows you to configure a new Text Message Center profile for use when

sending this type of message.

Multimedia Message

The following options are available:

• Sending Options:

䢇 Priority: you can select the priority level of your messages. 䢇 Expiration: select the length of time you wish the message to remain on the

MMS server.

䢇 Delivery: you can set a time delay before the phone sends your messages. 䢇 Message Size: you can set the maximum allowed size for a multimedia

message.

䢇 Request Delivery Report: when this option is enabled, the network informs

you whether or not your message has been delivered.

䢇 Request Read Report: when this option is enabled, your phone sends a

request for a reply along with your message to the recipient.

䢇 Keep a Copy: you specify whether you want to keep a copy of the sent

messages on your phone.

䢇 Add my Contact Details: you send your content information along with your

sent messages.

• Receiving Options: you can specify the category of messages you want to receive. Allows you to set the following:

䢇 Download Type: allows you to set the message receipt options. Choose from

Auto Download, Manual, or Reject.

䢇 Send Delivery Report: when this option is enabled, the phone informs the

network whether or not your message has been received.

䢇 Send Read Report: when this option is enabled, your phone sends a

notification back to the recipient indicating that your message has been received.

Page 73

Section 7: Messaging 73

䢇 Reject Anonymous: allows you to automatically reject messages with a

category of anonymous.

䢇 Reject Advertisement: allows you to automatically reject messages with a

category of advertisement.

• Multimedia Message Profiles: you can select a connection profile which is then

used for sending and receiving Multimedia messages.

•

MMS Profiles: allows you to select an option for sending a multimedia

message. Choose from the following options:

䢇 MEdia Net wap1.x 䢇 MEdia Net wap2.x 䢇 Cingular MMS

• Profile Settings (accessed by pressing the Options softkey)

䢇 Set Name 䢇 Access Name 䢇 Auth Type 䢇 User ID 䢇 Password 䢇 Protocol 䢇 Home URL 䢇 Proxy address 䢇 Port 䢇 Linger Time (Sec.) 䢇 Advanced Settings (Static IP, Static DNS, and Traffic Class)

• Auto Resize Image: you can specify that the received image by be resized up/down:

䢇 No Resize 䢇 100 KB 䢇 300 KB 䢇 600 KB

• Creation: you can specify that the users creating new media content be given the

following options:

䢇 Warning 䢇 Free 䢇 Restricted

• Default Style: you can specify the default visual parameters used by this type of

message:

䢇 Font Color 䢇 Font Style 䢇 Background Color 䢇 Page Duration

Page 74

Voice Mail Message

The following options are available:

• Voicemail: you can specify the default phone number used for access of phone’s remote voicemail:

䢇 Name: allows you to create a new descriptive name for this access number. 䢇 Center Address: allows you edit the existing number and create a new number

for use when accessing the remote voicemail.

Push Message

The following options are available:

• Receiving Option: you can specify whether to turn push message reception On or Off.

•

Service Loading: you can specify whether to load this service:

䢇 Always 䢇 Prompt 䢇 Never

Memory Status

You can check the amount of the memory being used and the memory remaining for Multimedia, Text, Push, and Configuration Messages. The display shows the total space including the used and free space. You can also view how much space is currently occupied by each message box.

1. When the Idle screen displays, press the Menu soft key.

2. Highlight Messaging, and press the Select soft key or the key.

3. Highlight Memory Status and press the Select soft key or the key.

4. Use your Up and Down Navigation keys to select a particular folder for

review.

5. Press the Select soft key or the key. The contents of that folder are

then listed.

6. When you have finished, press the key.

Page 75

Section 8: Changing Your Settings 75

Section 8: Changing Your Settings

Topics Covered

• Sound Settings

• Display Settings

• Time & Date

• Phone Settings

• Call Settings

• Connectivity

• Configuring your Phone’s Connections

• Configuring your Phone’s USB Connection

• Software Update

• Application Settings

• Reset Settings

• Memory Settings

This section explains the sound and phone settings for your phone. It includes display settings, security settings, and extra settings associated with your phone.

Sound Settings

You can customize various sound settings.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Profiles and press the Select soft key or the key. Use the Down

Navigation key to scroll through the following list of available options:

Normal Profile

To access the available options for this calling profile, press the Options soft key. Highlight Edit and press the Select soft key or the key. Use the Left and Right Navigation keys to move between the various tabs. This menu allows you to alter the audio settings for the following categories:

Page 76

•

Incoming Call: allows you to edit the properties for audio alert used for incoming

phone calls.

䢇 Call Alert Type: allows you to select the way in which the selected ringtone is

played to notify you of an incoming call. Options include:

䢇 Melody: the phone sounds the selected melody. 䢇 Increasing Melody: the phone sounds the selected melody at continually

increasing volume until the incoming call is answered.

䢇 Vibration: the phone vibrates. 䢇 Vibration then Melody: the phone vibrates then plays the melody. 䢇 Vibration & Melody: the phone vibrates and also plays the melody. 䢇 Vibration & Increasing Melody: the phone vibrates and also plays the

melody at increasing volume levels during each consecutive ring.

䢇 Mute: the alert is muted.

䢇 Voice Call Ringtone: allows you to select a ringtone from your My Stuff (Phone)

folder which contains not only the default phone ringtones, but also any new ringtones which have been downloaded from the Internet.

䢇 Ringtone Volume: allows you to select the volume at which the ringtone is

played. This range is from 1 - 7.

䢇 Auto Reply: allows you to setup an automatic text reply for incoming calls.

• New Messages: allows you to edit the properties for audio alert used for newly received messages.

䢇 Message Alert Type: allows you to select the way in which the selected

ringtone is played to notify you of an incoming call. Options include the use of either the Mute, Melody, Vibration, or a combination of the latter two.

䢇 Melody: the phone sounds the selected melody. 䢇 Vibration: the phone vibrates. 䢇 Vibration & Melody: the phone vibrates and also plays the melody. 䢇 Mute: the alert is muted.

䢇 Message Alert Tone: allows you to select either an Effect Tone (Beep, Pure,

Clean, or Fun) or a personalized My Alert Tone from your My Stuff (Phone) folder which contains not only the default phone tones, but also any new tones which have been downloaded from the Internet.

䢇 Message Alert Repetition: allows you to select whether the message alert

tone is used to notify you of a new message only once or periodically until you open the message.

䢇 Alert Tone Volume: allows you to select the volume at which the tone is played.

This range is from 1 - 7.

• Phone Sounds: allows you to edit the properties for phone’s audio properties while it is set to this mode

䢇 Keypad Tones: allows you to select what tone is played when the keypad keys

are pressed. Options include the Beep or Clean.

Page 77

Section 8: Changing Your Settings 77

䢇 Power On Type: allows you to select what tone is played when the phone is

powered On. Options include a Melody, Vibration, Vibration & Melody, or Mute.

䢇 Power Off Type: allows you to select what tone is played when the phone is

powerd Off. Options include a Melody, Vibration, Vibration & Melody, or Mute.

䢇 Folder Open/Close Tone: allows you to select what tone is played when a

folder is Opened (accessed) or Closed. Options include a Melody, 1 - 3, or Mute.

䢇 Volume, Phone Sounds: allows you to select the volume at which the keypad

tone is played. This range is from 0 - 7.

Notes: To save any changes made to this profile’s parameters, press the Options soft key. Highlight Save and press the Select soft key.

Other Available Profiles

The phone can be set to additional audio profiles which are available via the Profiles menu. Although each profiles has similarities, they have each been preset to use different audio parameters for incoming phone call alerts, message alerts, and phone usage. For more information, refer to "Icons" on page 17.

• The Silent profile causes the speaker to be muted and the phone only vibrates and displays information on its front panel LCD. This icon is accompanied on screen by the Vibrate icon.

Notes: The Silent profile can also be activated by pressing and holding the key. An on screen message notifies you that the new Silent profile is now active. To deactivate this profile, press and hold the key again.

• The Driving profile keeps the speaker is active. In this case, the speaker is active and will launch the currently selected ringtone or melody when the associated notification is activated. This icon is accompanied on screen by the Audio icon.

• The Meeting profile causes both the speaker audio and vibration features to be disabled and only the front panel LCD displays information. This icon is accompanied on screen by the Mute icon.

• The Outdoor profile keeps the speaker active, the volume settings are raised to their highest levels, any currently active ringtones or melodies are activated, and the phone’s vibrate feature is activated. This icon is accompanied on screen by the Vibrate/Audio icon.

• The Airplane profile allows you to use many of your phone’s features, such as Games, Music, Notepad, Voice Memos, etc., but you cannot send or receive any calls or access online information. This icon is accompanied on screen by the Mute icon.

Page 78

Display Settings

In this menu, you can change various settings for the display or backlight.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Display Settings and press the Select soft key or the key.

The following options are available. Use the Down Navigation key to scroll to and set options:

Main Display

• Wallpaper: allows you to select from either the preloaded wallpapers found in the

My Stuff (Phone) folder or photographs which have been either taken with the camera or downloaded from the Internet. The None option

leaves the wallpaper

blank. Press the Up or Down Navigation keys to make your selection. Press the Set soft key or the key to make your selection.

•

Greeting Message: allows you to enter the text which appears on the screen then

the phone powers on

• Menu Style: allows you to select the whether the phone’s menus are presented in either a Grid Menu style of List Menu style. Press the Up or Down Navigation keys

to make your selection. Press the Select soft key or the key to make your selection.

•

Pop Up List Menu: allows you to select the whether the to activate pop up menus.

Press the Up or Down Navigation keys to make your selection. Choose from On or Off. Press the Save soft key or the key to make your selection.

•

Idle Screen Setting: allows you to select what is displayed when the phone is in Idle

mode

. Press the Left or Right Navigation keys to make your selection. Choose from

Text Clock, Clock 1, Clock 2, or Calendar. Press the Save soft key or the key to make your selection.

•

Dialing Display: allows you to select the properties of those items which are part of

the display such as Font and Color:

•

Font Type: allows you to select what font is used. Press the Left or Right

Navigation keys to make your selection. Choose from Normal, Quill Pen, or

Sticky Note. Press the Save soft key or the key to make your selection.

•

Font Size: allows you to select a size for the selected font. Press the Left or

Right Navigation keys to make your selection. Choose from Large, Medium, or

Small. Press the Save soft key or the key to make your selection.

Page 79

Section 8: Changing Your Settings 79

•

Font Color: allows you to select a color for the selected font. Press the Left or

Right Navigation keys to make your selection. Choose from Monochrome,

Rainbow, Gradation, or Basic. Press the Save soft key or the key to make your selection.

•

Background Color: allows you to select a color for the background screen.

Press the Left or Right Navigation keys to make your selection. Choose from the

available colors. Press the Save soft key or the key to make your selection.

Front Display (LCD)

• Wallpaper: allows you to select a graphic for display on the phone’s front LCD.

Press the Up or Down Navigation keys to view the available graphics. Choose

from Clock, My Image, or Screen Slogan. Press the key to make your selection:

•

Clock: allows you to select a clock graphic which connects to the Internet and

sets the clock time

. Press the Options soft key and highlight Edit. Press the

key and use the Left or Right Navigation keys to make your selection. Press

the Save soft key or the key to make your selection. Choose from:

䢇 Digital Clock 䢇 Analog Clock 1 䢇 Analog Clock 2

• My Image: allows you to select a graphic for display on the LCD as a wallpaper.

This image can be selected from either the preloaded wallpapers found in the My Stuff (Phone) folder, photographs which have been either taken with the

camera, or images downloaded from the Internet.

Press the Options soft

keysoft key, highlight Edit and press the key. Press Change to open the My Stuff (Phone) location where you’ll choose the desired file from the available folders. Press the Up or Down Navigation keys to make your selection. For pre-installed images, choose from a Large, Medium, or Small version. Use the Navigation keys to align your image into the availble display area. Press the Options soft key and higlight Set (to save the image) or Change (to change the

image) and press the key to load your selection.

•

Screen Slogan: allows you to enter the text which appears on the screen as a

wallpaper.

•

Greeting Message: allows you to enter the text which appears on the phone’s LCD

screen when it powers on

Page 80

Light Settings

• Brightness: allows you to adjust the display brightness for the LCD to see it better

in different lighting conditions. Press the Left or Right Navigation keys to adjust the brightness.

Press the Save soft key or the key to make your selection.

•

Backlight Time: allows you to select the amount of time for the backlight to remain

on and the length of time for the actual dimming to occur. Press the Up or Down Navigation keys to make your selection. For On choose from either 15 Seconds, 30 Seconds, or 1 Minute. For Dim choose from either Off, 5 Seconds, 15 Seconds,

30 Seconds, or 1 Minute. Press the Save soft key or the key to make your selection.

•

Keypad Light: allows you to determine when to use the keypad light. Press the Up

or Down Navigation keys to make your selection. Choose from either Use at Any Time, or Use at Custom Time. Press the Save soft key or the key to make your

selection.

•

Touch Light: allows you to either activate or deactivate the touch light. Press the Up

or Down Navigation keys to make your selection. Choose from either On or Off. Press the Save soft key or the key to make your selection.

•

Front LCD Contrast: allows you to adjust the contrast value for the front LCD.

Press the Left or Right Navigation keys to adjust the contrast.

Press the Save soft

key or the key to make your selection. Press the Ye s soft key to confirm your selection.

Time & Date

This menu allows you to change the current time and date displayed. You can also find out what time it is in another part of the world.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Time & Date and press the Select soft key or the key. The

following options are available. Use the Down Navigation key to scroll to and set options:

• Time Zone Updating: allows you to select whether the time zone information is

updated: Automatic (which greys-out all other options), Manual Only, or Prompt first.

• Home Zone: allows you to enter the assign your current time zone based upon

Greenwich Mean Time. Major cities in each zone are displayed upon selection. Use the Left or Right Navigation key to select a new zone. Press the OK soft

key or the key to save the new selection.

Tip: You can also choose to activate Daylight Savings Time within the Home Zone menu option.

Page 81

Section 8: Changing Your Settings 81

•

Time: allows you to enter the current time using your keypad. Press the Left or

Right Navigation key to select AM or PM. Press the Save soft key or the key to

save the new selection.

•

Date: allows you to enter the current date using your keypad. Press the Left or Right

Navigation key to navigate between the month, day, or year fields. Press the Save soft key or the key to save the new selection.

•

Time Format: allows you to change the time format to 12 hours or 24 hours. Use the

Left or Right Navigation key to select between the two options. Press the Save soft

key to save the new selection.

•

Date Format: allows you to change the date format. Press the key to activate

the option. Use the Up or Down Navigation key to select between the different options. Press the OK soft key to change the format. Press the Save soft key to save the new selection.

Note: Automatic updates of time and date do not change the time you have set for alarm settings or calendar memos.

Phone Settings

To customize the settings of your phone use the following steps:

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Phone Settings and press the Select soft key or the key.

The following options are available. Use the Down Navigation key to scroll to and set options:

• Language: allows you to select a display language. You can set the Text

Language or the Input Mode.

• Screen Text: allows you to select the phone text. Use the Up or Down Navigation

key to highlight your selection. Press the OK softkey or the key to make your selection. Press the Save soft key to save your new selection. Options include:

䢇 Automatic: the language is automatically selected according to the language of

the SIM card used.

䢇 English: the selected phone language is changed to English. 䢇 Français: the selected phone language is changed to French. 䢇 Español: the selected phone language is changed to Spanish.

Page 82

•

Input T9: sets the language used when entering text into the phone. Use the Up

or Down Navigation key to highlight your selection. Press the OK softkey or the

key to make your selection. Press the Save soft key to save your new

selection. Options include:

䢇 English: the selected phone language is changed to English. 䢇 Français: the selected phone language is changed to French. 䢇 Español: the selected phone language is changed to Spanish.

• Shortcuts: allows you to change the applications assigned to your Navigation

keys.

• Press a particular Navigation key and press the Options softkey.

• Highlight Change and press the . Use the Up or Down Navigation key to

select a new application to assign to the previously pressed key.

• Press the Save soft key or the key to save the new application to the

assigned Navigation key.

• Own Number: allows you to enter a name and number into your phone for easy

referral.

Call Settings

This menu allows you to change the actions taken by the phone when dialing and receiving calls. These settings extend to not only voice calls but also Data calls as well.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Call Settings and press the Select soft key or the key. The

following options are available. Use the Down Navigation key to scroll to and set options:

All Calls

This allows you to configure some common high level parameters used by the phone for most types of calls.

• Show My Number: allows you to select how your ID is handled when an

outgoing call is initiated. Use the Up or Down Navigation key to highlight your

selection. Press the

key to make your selection. Press the Save soft key to

save your new selection. Options include:

䢇 By Network: you are identified to the other party using the default network

information.

䢇 Send: your phone number and name are sent to the other party. 䢇 Hide: your identifying information is hidden from the other party.

Page 83

Section 8: Changing Your Settings 83

•

Auto Reject: allows you to enable a phone feature which allows you to

automatically reject calls from a list of contacts. Use the Left or Right Navigation key to toggle the activation of this feature. Select Auto Reject List

and press the

key to access the list of rejected numbers. Press the key

to select an entry from the list of press the Create soft key to create a new phone entry. Press the OK softkey or the key to make your selection. Press the Save soft key to save your new selection.

•

Answering Mode: allows you to select how your phone answers incoming calls.

Use the Up or Down Navigation key to highlight your selection. Press the key to make your selection. Press the Save soft key to save your new selection. Options include:

䢇 Normal: allows you to answer an incoming call by pressing either the Accept

soft key or the

key.

䢇 Any key: allows you to answer an incoming call by pressing any key on your

phone.

䢇 Active Flip: allows you to answer an incoming call by just opening the phone.

• Show Caller ID: allows you to select whether your phone displays the caller ID

information for the incoming call. Use the Left or Right Navigation key to toggle

the activation of this feature. Press the

key to make your selection. Press

the Save soft key to save your new selection. Options include:

䢇 Activation On/Off: allows you to set whether your phone displays the caller ID

for the incoming call.

䢇 With Front Display: allows you to also display the caller ID on the front LCD.

• Call Status Tones: allows you to activate an alert tone for one of three available

status categories. Use the Up or Down Navigation key to highlight your

selection. Press the

key to make your selection. Press the Save soft key to

save your new selection. Options include:

䢇 Call Connect Tone: allows you to activate an alert tone when the a connection

has been made.

䢇 Minute Minder: allows you to activate an alert tone which sounds every minute

the call is active.

䢇 Call End Tone: allows you to activate an alert tone when the a connection has

been terminated.

• Alerts On Call: allows you to activate an alert tone for new messages being

received during an active call. Use the Up or Down Navigation key to highlight

your selection. Press the

key to make your selection. Press the Save soft

key to save your new selection. Options include:

䢇 Off/On: allows you to toggle the activation of this feature. Selecting Off prevents a

new message alert from sounding while you are on an active call. Selecting On allows an alert tone to sound if you receive a new message during an active call.

Page 84

Voice Calls

This allows you to configure those phone parameters associated to voice calls.

• Call Forwarding: enables incoming calls to be rerouted to a number that you

specify. Use the Up or Down Navigation key to highlight your selection. Press the

key to make your selection. Press the Select soft key to save your new

selection. Options include:

䢇 Always: allows you to forward Voice Calls and Data Calls. Press the Select soft

key and either enter the phone number or press the Options soft key to select a number from your Address Book. Once you have selected a number, press the Options soft key and select to either Activate/Deactivate this feature.

䢇 If Busy: allows you to forward Voice Calls and Data Calls to a designated number

instead of your voice mail number if you are on another phone call. Press the Select soft key and either enter the phone number or press the Options soft key to select a number from your Address Book. Once you have selected a number, press the Options soft key and select to either Activate/Deactivate this feature.

䢇 If No Reply: allows you to forward Voice Calls and Data Calls to a designated

number instead of your voicemail number when there is no answer on your phone. Press the Select soft key and either enter the phone number or press the Options soft key to select a number from your Address Book. Once you have selected a number, press the Options soft key and select to either Activate/ Deactivate this feature.

䢇 If Out Of Reach: allows you to forward Voice Calls and Data Calls to a

designated number instead of your voicemail number when you are not in an area covered by your service provider or when your phone is switched off. Press the Select soft key and either enter the phone number or press the Options soft key to select a number from your Address Book. Once you have selected a number, press the Options soft key and select to either Activate/Deactivate this feature.

䢇 Cancel All: allows you to cancel all Call Forwarding features. Press the Select

soft key to activate this feature.

• Call Waiting: informs you when someone is trying to reach you during another

call. Press the

key to make your selection. Press the Select soft key to save

your new selection. Options include:

䢇 Activate: allows you to activate this feature for all Voice Calls and Data Calls.

Press the Options soft key to select this option.

䢇 Deactivate: allows you to deactivate this feature for all Voice Calls and Data

Calls. Press the Options soft key to select this option.

䢇 Check Status: allows you to check the status of this feature for all Voice Calls

and Data Calls. Press the Options soft key to select this option.

Page 85

Section 8: Changing Your Settings 85

•

Auto Redial: allows to you automatically redial the last number if the call was

either cut off or you were unable to connect. Press the key to make your selection. Press the Save soft key to save your new selection. Options include:

䢇 Off: keeps the phone from automatically redialing the last number if the call was

disconnected or the call was cut off.

䢇 On: causes the phone to automatically redial the last number if the call was

disconnected or the call was cut off.

Data Calls

This allows you to configure those phone parameters associated to data calls.

• Call Forwarding: enables incoming data calls to be rerouted to a number that

you specify. Use the Up or Down Navigation key to highlight your selection.

Press the

key to make your selection. Press the Select soft key to save your

new selection. Options include:

䢇 Always: allows you to forward Voice Calls and Data Calls. Press the Select soft

䢇 If Busy: allows you to forward Voice Calls and Data Calls to a designated number

䢇 If No Reply: allows you to forward Voice Calls and Data Calls to a designated

䢇 If Out Of Reach: allows you to forward Voice Calls and Data Calls to a

䢇 Cancel All: allows you to cancel all Call Forwarding features. Press the Select

soft key to activate this feature.

Page 86

•

Call Waiting: informs you when someone is trying to reach you during another

call. Press the

key to make your selection. Press the Select soft key to save

your new selection. Options include:

䢇 Activate: allows you to activate this feature for all Voice Calls and Data Calls.

Press the Options soft key to select this option.

䢇 Deactivate: allows you to deactivate this feature for all Voice Calls and Data

Calls. Press the Options soft key to select this option.

䢇 Check Status: allows you to check the status of this feature for all Voice Calls

and Data Calls. Press the Options soft key to select this option.

Connectivity

The Connectivity Settings allow you to manage the settings associated with the connection types available to your phone, including, Bluetooth, Network, Wireless connectivity, and USB.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Connectivity and press the Select soft key or the key. Use the

Down Navigation key to scroll to and set these options.

Bluetooth

Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection. Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a range of one another, you can exchange information between them, even if they are located in different rooms.

The Bluetooth wireless technology settings menu provides the ability to view and change the device name, show the visibility, and set the security for the device.

Activation of Bluetooth

When the Bluetooth is turned on, you can use the Bluetooth features available. When the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To save battery life or in situations where Bluetooth use is prohibited, such as airline traveling, you can turn off the Bluetooth wireless technology headset.

Page 87

Section 8: Changing Your Settings 87

My Devices

This menu provides a list of Bluetooth wireless technology devices discovered by your handset.

1. From the Bluetooth menu items, highlight My Devices and press the Select

soft key or the key.

2. To search for the Bluetooth device(s), highlight Search For New Devices

and press the Select soft key or the key.

Connecting to a Bluetooth Device

From the Device list,

1. Highlight the device and press the Select soft key or the key.

2. Enter the PIN for the device.

If connecting to a Bluetooth wireless device consult your Bluetooth device user manual for your assigned PIN. If connecting to another handset, enter the same user-defined PIN on both handsets.

Note: The first time you try to pair with a handset, you and the owner of the other handset must enter the same PIN. Once the handsets are paired, you will not need to use the PIN again.

3. Press the OK soft key or the key.

4. If you are unable to pair with the device a popup appears in the display.

Press the Yes soft key to retry.

Configuring your Phone’s Bluetooth Visibility

When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its phone name and status. This can be useful if you are attempting to connect additional Bluetooth devices. Allowing your phone to promote its visibility can pose a security risk and incite unauthorized connection. This feature should be paired with a Bluetooth security option.

1. Highlight the option (On/Off) and press the Select soft key or the key.

Page 88

Configuring your Phone’s Bluetooth Name

When your phone’s Bluetooth visibility is turned On, it identifies itself using the name entered into this text field. This name can be altered by selecting the pre-existing text and selecting a new text string in its place. This feature should be paired with a Bluetooth security option.

1. Press the key to erase the previous name.

2. Use the phone’s keypads to enter a new name. The default input entry

method is Abc, where the initial character is Uppercase and each consecutive character in that same word is left as lowercase text.

3. Press the Save soft key or the key to save the new name.

Configuring your Phone’s Bluetooth Security

When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its phone name and status. This transmission can pose a security risk and incite unauthorized connection to your phone. It is recommended that you active your phone’s Bluetooth security.

1. Highlight the option (On/Off) and press the Select soft key or the key.

Bluetooth Services

Actually, the Bluetooth specification is a protocol that describes how the short-range wireless technology works, whereas individual profiles describe the services supported by individual devices. Profiles reduce the chance that different devices will not work together.

Your phone supports the following profile services:

• Headset: enables outgoing and incoming calls.

• Handsfree: the remote carkit enables outgoing and incoming calls.

• Bluetooth Stereo Headset: enables outgoing and incoming calls via a

headset equipped with stereo headsets.

• Serial Port: data communication can be established via a Serial Port

connection.

• Dial Up: The phone is configured as a dial up modem for access to the

Internet.

• Basic printing: The phone is configured to use bluetooth technology to

enable basic printing from the phone. This is useful to print received text message or contact information.

Page 89

Section 8: Changing Your Settings 89

•

File Transfer: The phone is configured to transfer data wirelessly to a target

device.

• Object Push: The phone is configured to wirelessly transfer information

about Pushes.

Configuring your Phone’s Connections

Your phone is wirelessly connecting to the Internet via a built in WAP browser. Connection can be made via either one of three available WAP browsers: MEdia Net wap1.x, MEdia Net wap2.x, or Cingular MMS (MultiMedia Server). Use this menu to create and customize the profiles containing the settings for connecting your phone to the network. You need these settings to use the web browser or send MMS messages or e-mails. Although the active connection can be changed by the user, it is recommended that this choice be made with the assistance of either the retailer or customer service representative.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Connectivity. Highlight Connections and press the Select soft key

or the key. Use the Up or Down Navigation key to highlight one of these options:

䢇 MEdia Net wap1.x 䢇 MEdia Net wap2.x 䢇 Cingular MMS

4. Press the Options soft key.

Notes: The MEdia Net WAPs are pre-configured and can not be altered on this screen. The Cingular MMS

connection option can be edited, renamed, or deleted on this screen. Your phone is set up by default for connecting to the network. If you change the settings without first checking with your service provider, the web browser, MMS, and e-mail features may not work properly.

5. To create a new connection, press the Options soft key, select New, and

press the Select soft key or the key.

- or -

6. To edit the existing Cingular MMS, highlight this entry, press the Options

soft key, select Edit, and press the Select soft key or the key.

7. Select the parameter you want to edit:

䢇 Set Name: enter a profile name. 䢇 Access Name: edit the access point name. 䢇 Auth Type: select the type of authentication used for this WAP connection: None,

Normal, or Secure.

Page 90

䢇 User ID: enter the User ID required to connect to the network. 䢇 Password: enter the user password required to connect to the network. 䢇 Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or

Other.

䢇 Home URL: enter the URL address of the page to be used as your homepage. 䢇 Gateway address: (wap1.x only) enter the gateway address of the proxy server. 䢇 Proxy address: (wap2.x and Cingualr MMS) set the proxy server address and

port.

䢇 Port: enter the connection port. 䢇 Linger Time (Sec.): set a time period (in seconds) after which the network is

disconnected if there has been no new data traffic in that time.

䢇 Advanced Settings: allows you to configure some of the IP-specific

information: Static IP, Static DNS, Server information, and Traffic Class.

䢇 Static IP: specify if you want to manually enter an IP address. If you want the

IP address to be automatically assigned by the server, remove the check mark.

䢇 Local phone IP: enter the IP address obtained from the network operator, if

you checked the Static IP option.

䢇 Static DNS: specify if you want to manually enter the Domain Name Server

(DNS) address. If you want the address to be automatically assigned by the server, remove the check mark.

䢇 Server 1/Server 2: enter the Domain Name Server (DNS) addresses. 䢇 Traffic class: select the traffic class.

Note: The WAP settings may vary depending on the service provider.

Configuring your Phone’s USB Connection

Your phone can connect to a PC via the included USB cable.The phone can be configured to open launch a default application when an active USB connection is detected.

1. Use the USB adapter cable to connect the handset to the target PC. When

an active connection has been established, a USB icon ( ) appears on the phone.

2. When the Idle screen displays, press the Menu soft key.

3. Select Settings and press the Select soft key or the key.

Page 91

Section 8: Changing Your Settings 91

Select Connectivity. Highlight Select USB Mode and press the Select soft

key or the key. Use the Up or Down Navigation key to highlight one of these options:

䢇 Media Player: sets the Media Player to launch as the default application when a

USB connection is detected. This is the default application.

䢇 PC Studio: sets PC Studio to launch as the default application when a USB

connection is detected.

䢇 Ask on Connection: requires the phone to present a “Select USB Mode”

pop-up which requires you to assign a default USB application.

5. With the application highlighted, press the Save soft key or the key.

Software Update

The Software Update feature enables you to use your phone to connect to the network and upload any new phone software directly to your phone.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Software Update and press the Select soft key or the key.

4. Press the key to continue the update process and follow the on screen

instructions.

Application Settings

The Application Settings feature allows you to configure the functional parameters for most of the on board applications. These applications are described in more detail within other sections of this manual.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Application Settings and press the Select soft key or the key.

4. Select the type of application which you want to change.

䢇 Messaging Settings (page 71) 䢇 Browser Settings (page 148) 䢇 Camera Settings (page 123) 䢇 Camcorder Settings (page 127) 䢇 Media Player Settings (page 116) 䢇 Cingular Vide Settings (page 115) 䢇 Record Audio Settings (page 131) 䢇 Calendar Settings (page 134) 䢇 Address Book Settings (page 51)

5. Press the Select soft key or the key.

Page 92

Security

The Security feature enables you to restrict the use of your phone by the others and to restrict the types of calls.

Various codes and passwords are used to protect the features of your phone.

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Security and press the Select soft key or the key.

The following options are available. Use the Up or Down Navigation key to scroll to and set options.

Phone Lock

When the Phone lock feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone password each time the phone is switched on. To change the phone password, see "Change Phone Password" on page 93. Once the correct password has been entered, you can use the phone until you switch it off. The following options are available:

• Off: you are not asked to enter the phone password when you switch on the phone.

•

On: you are required to enter the phone password when you switch on the phone.

SIM Lock

When the SIM Lock feature is enabled, your phone only works with the current SIM. You must enter the lock code to unlock the SIM so you can use a different SIM card.

• Once you have entered the lock code, you are asked to confirm your password.

Reenter your password and press the OK soft key.

PIN Check

When the PIN Check feature is enabled, you must enter your PIN each time you switch on the phone. Consequently, any person who does not have your PIN cannot use your phone without your approval.

Note: Before disabling the PIN Check feature, you must enter your PIN.

The following options are available:

• Off the phone connects directly to the network when you switch it on.

•

On: you must enter the PIN each time the phone is switched on.

Page 93

Section 8: Changing Your Settings 93

Lock Applications

Using this menu, you can lock the following categories:

• Lock All

• Messaging

• My Stuff

• Recent Calls

• Address Book

• Calendar

• Note

• IM

• Task s

Once you have locked the contents, you must enter the phone’s password to access the associated menus.

FDN Mode

FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing calls to a limited set of phone numbers.

The following options are available:

• Off: you can call any number.

•

On: you can only call phone numbers stored in Phone book. You must enter your

PIN2. The following options are available:

䢇 Full length entries or wild cards can be entered in to the FDN list. 䢇 A full length number with a specific contact name can be entered into the FDN list. 䢇 Wildcard entries allow a range of numbers to be dialed with a single entry: ex. 555

– All dialed numbers that begin with 555 will be allowed. Numbers that do not match the conditions in the FDN list will be restricted. Note: Entering an asterisk (*) is not required for wild card entries.

Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.

Change Phone Password

The Change Phone Password feature allows you to change your current phone password to a new one. You must enter the current password before you can specify a new one.

Once you have entered a new password, you are asked to confirm it by entering it again.

Page 94

Change PIN Code

This feature allows you to change your current PIN, provided that the PIN Check feature is enabled. You must enter the current PIN before you can specify a new one.

Once you have entered a new PIN, you are asked to confirm it by entering it again.

Change PIN2 Code

The Change PIN2 feature allows you to change your current PIN2 to a new one. You must enter the current PIN2 before you can specify a new one. Once you have entered a new PIN2, you are asked to confirm it by entering it again.

Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.

Reset Settings

You can easily reset your phone to its default settings. To reset your phone:

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Reset Settings and press the Select soft key or the key.

4. The following options are available. Use the Up or Down Navigation key to

scroll to and set options. Choose from the following:

• All

• Phone Settings

• Display Settings

• Profiles

• Alarms

5. Press the key to make your selection and press the OK soft key.

6. Enter your phone password, if prompted.

7. At the “Reset Settings?” prompt, press the Yes soft key to reset, or the

No soft key to cancel. Once your phone has been reset to its default

settings for those selected options, it will restart itself in order to incorporate the new settings.

Page 95

Section 8: Changing Your Settings 95

Memory Settings

You can easily check the amount of memory being used for storing data, such as messages, media, calendar data, or contacts entries. You can also delete any selected information from your phone:

1. When the Idle screen displays, press the Menu soft key.

2. Select Settings and press the Select soft key or the key.

3. Select Memory Settings and press the Select soft key or the key.

4. The following options are available. Use the Up or Down Navigation key to

scroll to and set options. Choose from the following:

• Clear Memory

• Memory Status

Clearing Memory

1. Highlight Clear Memory and press the Select soft key or the key.

2. Highlight All and press the key to select all available categories.

You can remove the check mark by pressing the key again. Selecting All places a checkmark adjacent to every entry in the list.

- or -

3. Highlight a specific category and press the key to select it.

4. Press the OK soft key.

5. Enter your password (if applicable) and press the Confirm soft key.

Depending on your phone’s security settings, you may be asked to enter your password a second time.

6. At the Clear all memories? confirm screen, press the Yes soft key to

continue, or the No soft key to cancel.

7. When you are finished, press the key to return to Idle mode.

Page 96

Checking the Memory Status

1. Highlight Memory Status and press the Select soft key or the key.

2. Highlight the storage category and the Select soft key or the key. you

can choose from one of the following categories:

• Shared Memory

• Messaging

• My Stuff

• Calendar

• Task

• Note

• Address Book

3. To view the contents of a category’s memory, use the Up or Down

navigation key to select the entry and press the Select soft key.

4. To delete all the entries in this category, highlight All and press the key

to select the categories.

5. Press the Delete soft key.

6. At the Delete? confirm screen, press the Yes soft key to continue, or

the No soft key to cancel.

7. Enter your password (if applicable) and press the Confirm soft key.

Depending on your phone’s security settings, you may be asked to enter your password a second time.

8. When you are finished, press the key to return to Idle mode.

Page 97

Section 9: Cingular Mall 97

Section 9: Cingular Mall

Topics Covered

• Shopping for Audio

• Shopping for Games

• Shopping for Graphics

• Shopping for Multimedia Content

• Shopping for Applications

• Accessing the MEdia Net Home

The Cingular Mall topics covered in this section are shopping for Tones, Games, Graphics, Multimedia, and Accessing the MEdia Home site.

Note: Prior to purchasing downloadable tones, graphics, games, or other applications, it is necessary to setup an e-wallet account so that with every purchase, your account can easily be debited.

Shopping for Audio

The Shop Tones menu option allows you to shop for audio tones using the built-in browser. You can download, record new, and save audio to either your Audio or

Music folder. To access this menu option, use the following steps:

1. When the Idle screen displays, press the Menu soft key.

2. Select Cingular Mall and press the Select soft key or the key.

3. Highlight the Shop Tones menu option to launch the built-in browser and

select a file to download. Follow the on-screen options. The downloaded files can be stored into either the Audio or Music folders found within the My Stuff (Phone) location. Music Tone categories include:

䢇 Featured Artists 䢇 Answer Tones 䢇 Search for a specific audio file by name

4. Select an audio file and press the key.

5. When you are ready to purchase the audio file, press the Buy Now button

to charge your e-wallet account and complete the transaction.

Page 98

Shopping for Games

The Shop Games menu option allows you to shop for games using the built-in browser. You can download new games to your Games folder. To access this menu option, use the following steps:

1. When the Idle screen displays, press the Menu soft key.

2. Select Cingular Mall and press the Select soft key or the key.

3. Highlight the Shop Games menu option to launch the built-in browser and

select a game to download. Follow the on-screen options. The downloaded files can be stored in the Games folder found within the My Stuff (Phone) location. Categories include:

䢇 New Arrivals 䢇 Retro 䢇 3D Games 䢇 Game Clubs 䢇 Search for a specific game by name

4. Select a game entry and press the key.

5. When you are ready to purchase the game, press the Buy Now button to

charge your e-wallet account and complete the transaction.

Shopping for Graphics

The Shop Graphics menu option allows you to shop for graphic images using the built-in browser. You can download new images to your Graphics folder. To access this menu option, use the following steps:

1. When the Idle screen displays, press the Menu soft key.

2. Select Cingular Mall and press the Select soft key or the key.

3. Highlight the Shop Graphics menu option to launch the built-in browser

and select an image to download. Follow the on-screen options. The downloaded files can be stored in the Graphics folder found within the My Stuff (Phone) location. These images can be used as wallpapers or included into multimedia messages. Categories include:

䢇 TV 䢇 Express Yourself 䢇 Latin 䢇 Search for a specific image by name

4. Select an image entry and press the key.

䢇 When you are ready to purchase the image, press the Buy Now

button to charge your e-wallet account and complete the transaction.

Page 99

Section 9: Cingular Mall 99

Shopping for Multimedia Content

The Shop Multimedia menu option allows you to shop for multimedia files (videos) using the built-in browser. You can download new videos to your Videos folder. To access this menu option, use the following steps:

1. When the Idle screen displays, press the Menu soft key.

2. Select Cingular Mall and press the Select soft key or the key.

3. Highlight the Shop Multimedia menu option to launch the built-in browser

and select a video file to download. Follow the on-screen options. The downloaded files can be stored in the Video folder found within the My Stuff (Phone) location. These files can be included into multimedia messages or sent as attachment files to text messages.

4. Select an video file entry and press the key.

5. When you are ready to purchase the file, press the Buy Now button to

charge your e-wallet account and complete the transaction.

Shopping for Applications

The Shop Applications menu option allows you to shop for application files using the built-in browser. You can download the new applications to your Applications folder. To access this menu option, use the following steps:

1. When the Idle screen displays, press the Menu soft key.

2. Select Cingular Mall and press the Select soft key or the key.

3. Highlight the Shop Applications menu option to launch the built-in

browser and select an application to download. Follow the on-screen options. The downloaded apps. can be stored in the Applications folder found within the My Stuff (Phone) location. These files can be included into multimedia messages or sent as attachment files to text messages.

4. Select an video file entry and press the key.

5. When you are ready to purchase the application, press the Buy Now button

to charge your e-wallet account and complete the transaction.

Page 100

100

Accessing the MEdia Net Home

The MEdia Net Home menu option allows you to quickly access your Cingular MEdia Net homepage using the built-in browser. This page gives you quick access to information such as local weather, sports scores, horoscope information and quick links to the previously mentioned shopping sites. To access this menu option, use the following steps:

1. When the Idle screen displays, press the Menu soft key.

2. Select Cingular Mall and press the Select soft key or the key.

3. Highlight the MEdia Net Home menu option to launch the built-in browser

and launch this Cingular homepage.