Samsung WT10S2P, WT10S2, SWT99C1P, SWT90C1, SWT12K2P User Manual
WASHING MACHINE
Owner’s Instructions
SW-903(P)/SWT90C1(P)/SWT90C2(P)
BEFORE USING THE WASHING MACHINE 1
PRECAUTIONS 1
CONTROL PANEL 2
DESCRIPTION AND CLEANING OF PART 2
WASHING PROCEDURE 3
INSTALLATION 5
LAUNDRY GUIDE 5
MAINTENANCE 6
TROUBLE SHOOTING 6
Before operating the washing machine, please read this manual
thoroughly, and retain it for future reference.
To Wash 3
To Spin Dry 3
To Rinsing 4
Overflow rinse 4
Additional rinse 4
Location 5
Mounting the legs 5
Connecting the drain hose 5
Changing the position of the drain hose
5
IF YOU NEED HELP.
Do not hesitate to call your local Samsung Service Center.
They will be pleased to help you. Be sure to give them your name,
address, telephone number and the purpose of the call.
SPECIFICATIONS
DIMENSIONS
WATER PRESSURE
WEIGHT
EXTRACTION EFFICIENCY
STANDARD QUANTITY OF WATER
RATING TIME
SWT90C1(P)/SWT90C2(P)
SW-903(P)
WT10S0(P)/WT10S1(P)/WT10S2(P)
820 x 524 x 1000 mm
820 x 524 x 920 mm
820 x 524 x 993 mm
0.05~0.78 MPa(
36 kg
50 %
Low : 44 l Middle : 56 l High : 67 l
Washing 1 Hour / Spinning 15 minutes
0.5 ~ 8.0kg . f/cm2)
DC68 - 01288A-01
Wash/Rinse
Drain Rinse
CYCLE SELECTOR
Wash
Drain
CYCLE SELECTOR
0
3
1
4
2
5
SPIN DRY TIMER
Soft Heavy
Normal
WASH SELECTOR
Delicate
(LITE)
Heavy
Normal
WASH CONTROL
0
9
3
12
6
15
WASH TIMER
WATER SELECTOR
Wash
Spin
BEFORE USING THE W ASHING MACHINE
Drain
Wash
DRAIN SELECTOR
WATER INTAKE
CAUTIONS
CONTROL PANEL
• Remove the cap-hose
from the drain hose.
• In the case of pump drained
washer, remove
the cap-hose from
the drain hole.
PRECAUTIONS WHEN OPERA TING
• Don't use excessively hot water.
(50˚C or more)
Plastic parts may be deformed or damaged.
Also, clothing may be deformed or decolored.
• Before washing,check all pockets.
If nails or pins remain in pockets,they may
damage the washer or clothes.
• Close the water tap a little if the
water pressure is too high.
• Never splash water on the control panel.
• Be sure to cover with the inner
cover on laundry before spinning.
This prevents laundry from
being tossed out and damaged.
• To avoid water splashes, close the
wash tub lid.
• Be sure laythe drain hose down.
(in case no drain pump)
• Be sure that the washer is grounded.
To avoid electrical shock,use a
metal pipe for the ground
connection. But, don't ground the
washer with gas pipes or telephone
lines to avoid to dangers of explosion
or lightning strike.
• Do not put your hands into the
spin dryer basket when it is
spinning.
Your fingers can be caught by
spinning laundry and damaged.
• Never allow children to operate
or play with the washer.
Children playing with the
washer may accidentally
fall into the washing tub.
• Disconnect the power cord from the
power supply when not in use.
• Ventilation opening must not be obstructed
by carpeting when the washing machine is
installed on a carpeted floor.
• If the supply cord of this appliance is
damaged, it must only be replaced by a repair
shopappointed by the manufacturer, because
special purpose tools are required.
• Warning to avoid overfilling and damages this
appliance must be filled with the operator
present using a moderate water supply
pressure only.
•
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
•
To avoid overfilling and damages this appliance
must be filled with the operator present using a
moderate water supply pressure only.
1
1.
WASH TIMMER
This is used to set the
wash time, 1-15 minutes.
2.CYCLE SELECTOR
This is used to set the
Washing/Rinsing
or Draining.
3.
SPIN DRY TIMER
This is used to set the
spin time, 1-5 minutes.
4.WATER
SELECTOR
During washing, WATER SELECTOR
KNOB should be selected.
During spin rinsing, WATER
SELECTOR KNOB should
be selected.
5
.WASH
SELECTOR(CONTROL)
This is used to select wash action.
You can wash laundry effectively
by various methods.
6
.DRAIN SELCTOR
Be sure to press the selector
knob to “WASH” while washing.
7
.WATER INTAKE
Connect water inlet to
a tap with a suitable.
Loading...