Samsung SW52ASP, SW62ASP User Manual

Owner’s Instructions

Register your product at

www.samsung.com/global/register

CODE NO. : DC68-01488K-EN

Please read this manual before using and note how to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.

The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

DESCRIPTION OF PARTS . . . . . . . . . . . . . . . . . . . . . . . 2

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . 3

INSTALLATION & MAINTENANCE . . . . . . . . . . . . . . . . . 4

ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

IN CASE OF PUMP-DRAINED WASHER . . . . . . . . . . . . . . . . . . 4

HOW TO CONNECT WATER SUPPLY HOSE . . . . . . . . . . . . . . . . 4

CLEANING THE FILTER NET . . . . . . . . . . . . . . . . . . . . . . . . . 5

HOW TO ADD THE FABRIC SOFTENER . . . . . . . . . . . . . . . . . . 5

HOW TO PUT THE DETERGENT IN . . . . . . . . . . . . . . . . . . . . .5

CLEANING THE FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

LEVELLING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

WASHING INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . 7

PROCEDURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

WASH PROGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

WASHING PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . 8

CLEANING THE TUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

OPTIONAL CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . 10

SPECIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

SW52ASP/SW62ASP

1

FEATURES

MAGIC FILTER

 This unique magic Filter ensures that

all the lint inside the tub is captured for
top quality filtering results to deliver
consistently effective cleaning results.

SOFTENER DISPENSER

 The Softener Dispenser releases the

fabric softener at the appropriate time
when the last rinsing proceeds.

WATERFALL FLOW

 The Waterfall Flow injected from

under the pulsator cascades with full
force back into the tub, pushing down
any clothes that float right under the
water surface. It is this Waterfall Flow
that enables this washing machine to
effectively wash large and heavy items,
such as bluejeans and blankets.

1

2

3

4

ECONO WASH COURSE

 Designed to address concerns on water

consumption. Less water is used per
wash, while continuing to deliver a clean
and effective washing performance.
It has been certified from WELS(Water
Efficiency Labelling and Standards) of
Australia.

2

DESCRIPTION OF PARTS

FILTER

Lint will be collected in

the filter during

washing.

WATERFALL FLOW

FABRIC SOFTENER

DISPENSER

BLEACH INLET

SPIN BASKET

PULSATOR

WATER SUPPLY HOSE(HOT)

DRAIN-HOSE (PUMP)

DETERGENT BOX

POWER CORD

GROUND LEAD

When the water pipe is
metal, make sure to cover
the end of the ground wire.

CONTROL PANEL

FRONT CONTROL

PANEL

ADJUSTABLE LEGS

Adjust the length

of the legs when

installing the washer.

WATER SUPPLY HOSE (COLD)

RAT PROTECTION
PANEL

LID

Be sure to keep the lid
closed during washing
and spinning.

3

SAFETY INSTRUCTIONS

Please note that the following precautions for safety intend to prevent unpredictable danger and damage
by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.

• Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.

WARNING

There might be serious injury or fatal accident when
you violate this instruction.

CAUTIONS

There might be a slight injury or damage when you
violate this instruction.

• If the plug (power supply cord) is damaged, it must be
replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.

• Do not pull the cord off or touch it with moist hands.

- An electric shock or a fire may take place.

• Do not bend the power supply cord by force or press it
with heavy things.

- An electric shock or a fire may take place.

• Do not install the washer nearby electric implement or
don’t put a candle light or cigarette light on the washer.

- A fire may take place.

• During operation, do not put your hands or metal
materials under the washer.

- You may be hurt by spinning board beneath the

washer.

• Stay away from the washer when the bottom of the
washer sinks into the water.

- There might be an electric shock. Please wait until the

water drains out completely.

• Do not put laundry stained with gasoline, benzene,
or alcohol in the washer, and keep the materials away
from the washer.

- An explosion or a fire may take place.

• During spinning, don’t put your hand in the spinning
tub.

- It may hurt your hands. If it does not stop within 15

seconds after you open the lid, call service agent
immediately.

• This appliance is not intended for use by young
children or infirm persons unless they have been
adequately supervised by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure that
they do not play with the appliance.

• This appliance has to be connected to the plug
endurable to proper power consumption.

• This appliance has to be positioned so that the plug is
accessible after installation.

• No user-serviceable parts inside. Refer any servicing to
qualified service personnel.

- Otherwise this may cause a mechanical error, electric
shock, fire or physical damage.

- The product warranty does not cover problems
resulting from disassembling the product.

• Do not use this product for business purposes.

• For washing machines with ventilation openings in the
base, that a carpet must not obstruct the openings.

• Don’t install it in the area with moisture or outdoor
where it has rain or snow

- An electric shock or a fire may take place.

• Please unplug the power supply cord when you do
not use it.

- An electric shock or a fire may take place.

• If there is dust or water on the power supply plug and
its connected part, please remove it completely.

- An electric shock or a fire may take place.

• Do not make your kids look into the inside of the
washer.

- If your kid falls into the washer, his life could be in

danger.

• Ventilate immediately without touching the power
plug if gas is leaking.

- An electric shock or a fire may take place if it catches

flame.

• If the washer makes strange noise, smell or smoke,
unplug it promptly and call service agent.

- An electric shock or a fire may take place.

• When cleaning, don’t spray water to the parts of the
washer directly.

- It may make it’s life span shorten. Also an electric

shock or fire may take place

• Don’t use several appliances together with an outlet.

- A fire may take place due to unusual heat.

• Don’t press the button with an awl or pin.

- An electric shock or a fire may take place.

• Use the new hose-sets and old hose-sets should not
be reused.

• If the damage is found on the current cord in use, it
should be replaced by manufacturer, service cener or
authorized person in order to avoid the risk.

• Connect the grounding wire to the shell plate, and
bury it under at least 25cm of earth:elternatively,
connect the ground wire to the appropriate pin on a
properly grounded power receptacle.
Never connect the wire to a telephone line, lightning
rod, or gas pipe.

4

INSTALLATION & MAINTENANCE

ENVIRONMENT

Leave some space.

Maintain at least 10cm between the washer and the wall.

Place the washer on a sturdy flat surface.

If the washer is placed on an uneven or weak
surface, noise or vibration occurs.
(allowable slope is 1 degree)

Never install the washer in a very steamy
environment or where it might be open to the rain.

Excessive moisture may cause an electrical shock hazard.

Avoid direct sunlight or heaters.

As plastic and electrical components are affected
by direct heat,never place the washer near furnaces,
boilers,etc.Do not place under direct sunlight.

IN CASE OF PUMP-DRAINED WASHER

 

Take out the
cap-hose

and
connect the
outlet-hose

 Be sure to join tightly

the drain hose into the
drain-outlet on the left
side of the machine.

 Install the drain

hose in the position
of about 70~80cm
above the ground.

HOW TO CONNECT WATER SUPPLY HOSE

Check the type of tap fitting which is in your laundry and then see appropriate instruction below:

A tap of ordinary type is desirable

ORDINARY TAP SQUARE TAP ROTATING TAP

In case of square tap

 

Take out the internal part of the connector and join it in
the following way.

1. Remove the adaptor from the
water supply hose.

4. Connect the water supply hose to
the adaptor. Pull down the part (c)
of the water supply hose .
When you release part (c) the hose
is automatically connects to the
adaptor making a 'click' sound.

2. First,using a "+" type screw
driver, loosen the four screws on
the adaptor.
Next,take the adaptor and turn
part(b) following the arrow for
gap about 5mm between them.

5. Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
Screw the hose clockwise all the
way in.

3. Connect adaptor to the water
tap by tightening the screws
firmly.
Then,turn part (b) following
the arrow and put (a) and
(b)together.

6. If the water tap is a screw type,
assemble a water supply hose that
fits to the tap as shown.

Note : The appliance is to be connected to the water mains using new hose-sets and that old hose-sets should not

be used.

Internal part

a

b

c

c

5

CLEANING THE FILTER NET

1. Push the upper part of
the filter and pull in.

2. Open the cover as
shown in the figure.

3. Clean the filter. 4. Close the cover and insert the lower
part of the filter in the basket first and
then push the filter with "click" sound .

HOW TO ADD THE FABRIC SOFTENER

 When a proper amount (one time does) of

fabric softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.

 Do not use detergent, bleach or starch into the

Softener Inlet.

 Using too much softener may produce

unsatisfactory results.

 Do not open the lid during the Spin Dry cycle.

If added too early, its effectiveness will decrease.

 Do not leave the softener

into the Softener
Dispenser for a long time.
Because softner
became stiff.

HOW TO PUT THE DETERGENT IN

1. Open the detergent box by pulling in the direction of the arrow as shown in the figure and then put the
powder detergent in the detergent box.

2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.

Caution : If softener is stored over the above base line, it may flow down at any time.

CLEANING THE FILTER (pump drained washer) LEVELLING

1. Place a rag under washer filter not to wet the floor.

2. Turn the filter-cap to the left.

3. Take out the filter and remove any sludge.

4. Reassemble in reverse order.

• If the washer is not leveled with the ground, it makes the
machine tremble more or be out of order. So, make sure
that the washer is leveled properly.

SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.



Open the lid of the machine, pour water into the tub up

to the level just below the pulsator, and adjust the legs so
that the pulsator is positioned at the center of the water
as shown in the figure.



Place the machine more than

10cm away from the wall.



Adjust the legs on feet

for levelling .

 Detergent Device

Put the detergent in proportion to water level

Loosen Lock

Water

6

PRECAUTIONS

WARNING! NOTE THE FOLLOWING PRECAUTIONS TO PREVENT ELECTRICITY
LEAKAGE AND THE POSSIBILITY OF ELECTRIC SHOCK.

Earthing is necessary to prevent leakage or electric shocks caused by the electric currents leaked from the machine.

How to earth an outlet with earthing terminals
when an earthed power load is not fitted.

Outlet with earthing terminals:

 Even when the internal wires of the earthing terminals are

joined, connect the earthing conductor (green) of the
machine to the tap.

When using an extension cord and a boosting transformer:

 Make sure that the earthing conductor is connected.

Never make an earthing to

 The telephone line, lightning rod, or gas pipe as it is

extremely dangerous in case of lightning strikes.

7

WASHING INSTRUCTION

PROCEDURE

1. Sort the laundry into separate wash loads.

Each load of washing should contain clothing which needs the same washing conditions.
For example, you should not wash delicate clothes with very dirty work clothes.

2. Load the laundry into washing.

Before load, check all pockets, and close zippers, hooks and eyes.

3. Add the detergent. (See Page 5)

4. Add the fabric softener. (See Page 5)

5. Close the lid.

6. Press power button.

7. Choose the wash program & optional cycle. (See Page 7~9)

If you choose “SENSOR” program you don’t need to select water level.
Water level is set automatically at “SENSOR” program.
Press the START/PAUSE button.

8. Select the water level.

Before choosing the water level, remember following things.
When you choose SENSOR, HEAVY-DUTY, ECONO-WASH, WOOL program,
water level is selected “AUTO” automatically, but if you want to choose water
level manually you can select. HIGH, MEDIUM, LOW, MINIMUM

9. Select the water temperature.

Before choosing thr water temperature remember the following:

• You can choose COLD

 COLD+HOT  HOT on all programs.
HOT is hot wash and cold rinse.
COLD is cold wash and cold rinse.

10. Close the lid and press the START/PAUSE button.

11. Do you want extra rinse?

For extra rinses press the cycle key 1 to 5 times (depending on the number of extra rinses required).
You can select up to 5 extra rinses or return to a single rinse by pressing the cycle key.
The time left display will show the number of rinses selected.
Note that the extra rinse program is not available when pause is selected or during the spin cycle.

WASH PROGRAM

SENSOR HEAVY DUTY

ECONO WASH

WOOL

Wash Time

SW52ASP 25 min 26 min 18 min 5 min

SW62ASP 20 min 20 min 18 min 5 min

Wash Action Normal Normal Normal Gentle

Wash Temp.

HOT

HOT+COLD

COLD

HOT

HOT+COLD

COLD

HOT

HOT+COLD

COLD

HOT+COLD

COLD

Deep Rinse COLD COLD COLD

HOT+COLD

COLD

Spin Time

SW52ASP 5 min. 30sec 5 min. 30sec 5 min. 30sec 1 min. 30sec

SW62ASP 5 min 5 min 5 min 1 min

Total Time

(High Water

level)

SW52ASP 48 min 49 min 43 min 23 min

SW62ASP 49 min 49 min 49 min 29 min

8

WASHING PROGRAM

SENSOR Program

 The best washing program is chosen automatically
 Load size and water level is determined automatically

 Unplug the power cord after washing.

CLEANING THE TUB

 Press the POWER button.
 Press the PROGRAM button to select the HEAVY DUTY course.
 Press the CYCLE button to select SOAK.

- You can select the water supply or temperature (hot/cold).

 Press the WATER LEVEL button to select HIGH.
 Press the START/HOLD button.
 Add a dedicated detergent and close the lid.

NOTE

- Never place laundry in the tub when cleaning inside the tub, as
this can cause discoloration or damage to the laundry.

- When doing the laundry after cleaning the tub, you may find

some impurities.
These are just detergent residues and impurities after the tub
cleaning. Perform the rinse cycle two to three times.

HEAVY DUTY Program

 This program is suitable for heavily soiled laundry
 Load size and water level is determined automatically or you

can choose the water level you want

 Unplug the power cord after washing.

ECONO Wash Program

 Saving your time, energy and water
 Achieving Rinse performance which is determined at AS/NZS

2040

 This program is suitable for lightly soiled laundry
 Load size and water level is determined automatically or you

can choose the water level you want

 Unplug the power cord after washing.

※Keeping the tub clean

When using the machine under humid conditions for an
extended time, various bacteria from the air may stick to
the tub and form black dirt (fungi), causing damage to the
human body.
To keep the tub clean and hygienic at all times, it is
recommended reading “Cleaning the Tub” above and using
only dedicated or recommended detergents to clean the tub
regularly at least once every one to three months.

WOOL Program

 This program is suitable for woollen clothes
 Only high and medium water levels are available

 Unplug the power cord after washing.

9

OPTIONAL CYCLE

WASH ONLY

 When you choose this cycle, wash cycle is operated.
 Pressing optional cycle key during washing changes the wash

time in two minute intervals.

 The wash time can be changed to between 3 and 25 minutes.
 Load size and water level is determined automatically.

 Unplug the power cord after washing.

RINSE ONLY

 When you choose this function, only rinse cycle is operated.
 Pressing function key during rinsing changes the number of

rinses. Up to 5 rinses can be optionally selected.

 Unplug the power cord after washing.

SOAK

 The laundry is soaked in water so that heavy dirt can be

eliminated sufficiently.

 You can choose soak cycle after choosing wash program.
 When you select soak function, 5 minute cycle (1 min. washing

then 4 min. pause) continue for 30 minutes before main wash
program.

 Load size and water level is determined automatically.

 Unplug the power cord after washing.

RINSE AND SPIN ONLY

 When you choose this cycle, only rinse & spin cycle are operated

without wash cycle.

 Pressing cycle key during operation changes the number of

rinse (see above).
You cannot change the spin dry time using this function.

 Unplug the power cord after washing.

SPIN ONLY

 When you choose this cycle, only spin cycle is operated.
 Pressing cycle key during spinning only cycle changes the spin

dry time.
The spin dry time can be changed to between 1 and 7 minutes.

 Unplug the power cord after washing.

DELAY START

 This function allows you to delay the start of your chosen wash

program for 3, 4, ... 18 hours.

 By pressing the delay start key you can select delayed period

for 3, 4, ... 17, 18 hours, and your washing machine will finish the
selected wash program after the delayed period.

10

TROUBLESHOOTING

Washing machine won’t work

Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is the fuse all right?
Is there enough water?

Spinning does not work

Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Is the lid closed?

Water does not drain

Is the drain hose down? (No pump)
Is the drain hose frozen?
Is the drain hose clogged?

If the water does not drain in 15
minutes, a buzzer will sound,
and the remaining time
indicator will show “5E”

Water is not supplied

Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?

If water is not supplied in 60
minutes, a buzzer will sound,
and the remaining time indicator
will shown “4E”.

While lid is opening,
the washing machine won’t work

Make sure to close the lid while washing machine is
operating.

SPECIFICATION

SW52ASP SW62ASP

Power input(Watts) 330 426

Load capacity(kg) 5.0 6.0

Size (WxDxH)(mm) 540 X 560 X 850 588 X 618 X 955

Net Weight (kg) 31 38

Water Consumption(liters) 106(high) 138(high)

Water Pressure(min-max) 50~780KPa 50~780KPa

Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Samsung Electronics Australia
7 Parkview Drive, Homebush Bay NSW 2127
1300 362 603
www.samsung.com/au