Samsung SV-DVD1E/XFA User Manual

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 1

Instruction Manual

DVD-VCR

DVD-V5000 (SV-DVD1E)

www.samsungvcr.com

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 2

Contents

◆ FOREWORD

■ Safety Instructions......................................................................................... 5

◆ DVD-VCR O

■ Front View of the DVD-VCR.......................................................................... 6

■ Rear View of the DVD-VCR........................................................................... 6

■ Infrared Remote Control................................................................................ 7

■ Display Indicators.......................................................................................... 8

■ Accessories................................................................................................... 8

◆ CONNECTING YOUR DVD-VCR

■ Deciding How to Connect DVD-VCR............................................................. 9

■ Connecting DVD-VCR to the TV using the Coaxial Cable............................ 10

■ Connecting DVD-VCR to the TV using the RCA Cable................................. 10

■ Connecting Other Equipment to Your DVD-VCR.......................................... 11

■ Connecting the Audio Output Cable.............................................................. 12

■ Plug &Auto Set Up........................................................................................ 12

■ Tuning Your Television for the DVD-VCR..................................................... 13

■ Deck Control Keys......................................................................................... 14

■ Basic TV Tuner Operations........................................................................... 15

■ Copying from DVD to VCR............................................................................ 16

◆ S

ETTING UP YOUR DVD-VCR

■ Inserting Batteries in the Remote Control...................................................... 17

■ Setting the Date and Time............................................................................. 17

■ Displaying/Hiding On-Screen Information..................................................... 18

■ Choosing Your Language.............................................................................. 18

■ Setting the DVD-VCR Output Channel.......................................................... 19

■ Selecting the RF OUT Sound Mode (B/G-D/K)(OPTION)............................. 19

■ Presetting the Stations Automatically............................................................ 20

■ Presetting the Stations Manually................................................................... 21

■ Clearing a Preset Station............................................................................... 22

■ Changing the Preset Station Table................................................................ 23

◆ R

ECORDING TELEVISION BROADCASTS

■ Selecting the Cassette Type.......................................................................... 24

■ Selecting the Recording Speed..................................................................... 24

■ NICAM(OPTION)........................................................................................... 25

■ Protecting a Recorded Cassette.................................................................... 26

■ Recording a Programme Immediately........................................................... 26

■ Recording a Programme with Automatic Stop............................................... 27

■ Using the Timer Programming Feature......................................................... 28

■ Checking a Preset Recording........................................................................ 29

■ Cancelling a Preset Recording...................................................................... 29

VERVIEWS

Contents (cont.)

◆ PLAYING BACK

■ Playing a Cassette......................................................................................... 30

■ Adjusting Picture Alignment Automatically.................................................... 30

■ Adjusting Picture Alignment Manually........................................................... 30

■ Intelligent Picture Control.............................................................................. 31

■ Record Source............................................................................................... 31

■ Selecting the Colour Mode............................................................................ 32

■ Selecting the Audio Output Mode.................................................................. 33

■ Selecting the Audio Mute Mode..................................................................... 33

◆ S

EARCHING FORA SEQUENCE

■ Playing a Cassette in Slow Motion................................................................ 34

■ Playing a Sequence Frame by Frame........................................................... 35

■ Playing a Sequence at Variable Speeds....................................................... 35

■ Searching for a Specific Sequence............................................................... 36

■ Auto Repeat Play........................................................................................... 37

■ Interval Repeat Play...................................................................................... 37

■ Using the Tape Counter................................................................................ 38

◆ A

DVANCED RECORDING FEATURES

■ Connecting an RCA Audio/Video Input Cable............................................... 39

■ Using the Assemble Edit Function................................................................. 40

■ Recording from Another DVD-VCR or Camcorder........................................ 40

■ Audio Dubbing a Pre-recorded Cassette....................................................... 41

◆ O

THER FUNCTIONS AND USEFUL RECOMMENDATIONS

■ SQPB (Super VHS Quasi PlayBack)............................................................. 42

■ Auto Power Off.............................................................................................. 42

◆ DVD FUNCTIONS

■ Disc Type and Characteristics....................................................................... 43

■ Choosing a Connection................................................................................. 44

■ Playing a Disc................................................................................................45,46

■ Using the Search & Skip Functions............................................................... 47

■ Using the Display Function (DVD)................................................................. 48

■ Using the Display Function (CD/VCD)........................................................... 48

■ Repeat Play................................................................................................... 49

■ Program Play (DVD/VCD/CD)....................................................................... 50

■ Random Playback (DVD/VCD/CD)................................................................ 50

■ Using the Disc View Function (Track View VCD).......................................... 51

■ Using the Disc View Function (Index View VCD).......................................... 51

■ Selecting the Audio Language (Using the AUDIO button)............................. 52

■ Selecting the Subtitle Language (Using the SUBTITLE button).................... 52

■ Changing the Camera Angle......................................................................... 53

■ Using the Mark Function (DVD/VCD)............................................................ 54

■ Recalling a Marked Scene............................................................................. 54

■ Clearing a Mark............................................................................................. 54

■ Using the Zoom (DVD/VCD).......................................................................... 55

■ 3D Sound Function........................................................................................ 55

■ Using the Setup Menu................................................................................... 56

■ Setting Up the Language Features................................................................ 57

■ Using the Disc Menu Language.................................................................... 57

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 4

Contents (cont.)

◆ DVD FUNCTIONS

■ Setting Up the AUDIO Language Features................................................... 58

■ Using the Subtitle Language......................................................................... 58

■ Setting Up the Parental Control..................................................................... 59

■ Setting Up the Audio Options........................................................................ 60

■ Setting Up the Display Options...................................................................... 61

◆ Technical Specifications....................................................................................... 62

◆ S

OLVING PROBLEMS

■ Problems and Solutions (VCR)...................................................................... 63

■ Troubleshooting Guide (DVD)....................................................................... 64

Safety Instructions

The following illustrations represent precautions.

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.

DO NOT OPEN THE DVD-VCR. Refer to service personnel.

Do NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%).

Do NOT expose the DVD-VCR to direct sunlight.

Do NOT expose the DVD-VCR to any liquids.

Symbols

Do NOT place any objects on the DVD-VCR or remote control.

1 1

= Step number

☛

➢

NoteImportantHold downPress/push

During a storm and/or lightning, unplug the DVD-VCR from the mains socket and aerial.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 6

STANDBY/ON

BUTTON

STEREO HEADPHONE JACK

Front View of the DVD-VCR

DVD DECK

HEADPHONES VOLUME CONTROL

OPEN/CLOSE BUTTON

DVD/VCR SELECT BUTTON

COPY BUTTON

VIDEO CASSETTE

COMPARTMENT

PROGRAMME SELECTION BUTTONS

F.F /

SKIP NEXT

BUTTON

PLAY/PAUSE BUTTON

RECORD BUTTON

STOP BUTTON

EJECT BUTTON

REW / SKIP BACK BUTTON

Infrared Remote Control

STANDBY/ON BUTTON

AUTO TRACKING, TRACKING +/-

VOLUME +/- BUTTONS

S-VHS BUTTON

MUTE BUTTON

3D SOUNDBUTTON

0-9 / AUDIO DUBBING BUTTON

REWIND/REVERSE PICTURE SEARCH BUTTON

ZOOM / RECORDING SPEED SELECTION BUTTON

SKIP BACK / RECORD BUTTON

RETURN / CLOCK/COUNTER BUTTON

DVD BUTTON

STOP BUTTON

ANGLE / TIMERBUTTON

SETUP BUTTON

JOYSTICK

TITLE BUTTON

MARK / SEARCH BUTTON

OPEN/CLOSE BUTTON SHUTTLE << / >>

PROGRAM +/- BUTTONS

LAST CHANNEL BUTTON TV/VCR BUTTON VCR BUTTON TV VIEW BUTTON

FAST-FORWARD/FORWARD SEARCH BUTTON

PLAY/PAUSE BUTTON SKIP NEXT / FRAME/STEP BUTTON AUDIO MODE SELECTION BUTTON SUBTITLE BUTTON DISPLAY BUTTON

DVD MENU BUTTON

CLEAR BUTTON AB REPEAT / REPEAT / MODE BUTTON

Rear View of the DVD-VCR

AERIAL IN CONNECTOR

OUT TO TV CONNECTOR

AUDIO (L,R) INPUT/OUTPUT SOCKETS

VIDEO INPUT/OUTPUT SOCKETS

COMPONENT VIDEO OUTPUT SOCKETS

AUDIO L, R OUTPUT SOCKETS

S-VIDEO OUT JACK

DIGITAL AUDIO OUT SOCKET (OPTICAL)

DIGITAL AUDIO OUT SOCKET (COAXIAL)

➢ Function Buttons:

◆ TV VIEW : Output selection key. Select the output that you want to see.

◆ DVD : Remote key active for DVD operation.

◆ VCR : Remote key active for VCR operation.

◆ JOYSTICK : Use for Up ( ), Down ( ), Left ( ), Right ( ), ENTER key.

◆ MENU : Use for DISC menu of DVD.

◆ SETUP : Use for SETUP menu of DVD or VCR.

If you press DVD button, the DVD is ligthining. It means DVD mode. ex) If you press

If you press VCR button, the VCR is ligthining. It means VCR mode. ex) If you press

ll (PLAY) key, the DVD will be play.

ll (PLAY) key, the VCR tape will be play.

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 8

Display Indicators

1 2 3 4 5 6 7 8 9 10 11

12 13 14 15 16 17 18

1 The DVD Deck is active 2 A DVD, CD, VCD or SVCD is loaded 3 A disc with LPCM (Linear Pulse Code

Modulation) audio is loaded

4 A DVD with a Dolby Digital is loaded 5 A DVD with a DTS soundtrack is loaded 6 The time, counter position, time remaining or

current deck status is displayed

7 The current TV show or video is broadcast in

Stereo

8 The Hi-Fi track of a VHS tape is playing 9 A Timer Recording is programmed or in progress.

If blinking there is an error. Also displays without the

clock hands to indicate that a recording is in progress

and blinks when the VCR is in Pause mode.

10 The VCR Record Speed is set to SP or LP 11 The VCR Deck is active 12 The status of the DVD deck is graphically displayed 13 3D Sound is active 14 The DVD has multiple angles to choose from 15 The number to the right of the “T” symbol is the

current title number

16 The number to the right of the “C” symbol is the

current title number

17 DVD to VHS copy is in progress 18 The status of the VCR deck is graphically displayed

Deciding How to Connect DVD-VCR

You must take into account various factors when connecting audio or video systems:

◆ Types of connectors available on your systems

◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or

temporarily (camcorder for example)

Your DVD-VCR is equipped with the following connectors.

Connector Location Type Direction Recommended Use

LINE

Audio output Rear Audio RCA Out ◆ LINE Audio out

COMPONENT Rear RCA Out ◆ COMPONENT out (DVD only) output

S-VIDEO Rear S-JACK Out ◆ S-Video out (DVD only) output

Digital AUDIO Rear Optical Out ◆ Digital Audio out (DVD only) output coaxial

Rear Audio/Video RCA In/Out ◆ Television

◆ Other VCR

Accessories

You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR). Together with your DVD-VCR, you will find the following accessories in the box.

REMOTE CONTROL

& BATTERIES

AUDIO & VIDEO

CABLE

OWNER’S

INSTRUCTIONS

COAXIAL CABLE

OUT TO TV Rear 75 Ω Out ◆ Television

coaxial

IN FROM ANT. Rear 75 Ω In ◆ Aerial

☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that allelements

are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions

and associated safety precautions.

coaxial ◆ Cable television network

◆ Satellite receiver

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 10

Connecting DVD-VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from one of the following sources:

◆ An outdoor aerial

◆ An indoor aerial

◆ A cable television network

◆ A satellite receiver

☛ Make sure that both the television and the DVD-VCR are

switched

off before connecting the cables.

1 Remove the aerial or network input cable from the television. 2 Connect this cable to the 75Ω coaxial socket marked on the

rear of your DVD-VCR.

3 Plug the coaxial cable supplied into the socket on your

DVD-VCR.

4 Plug the other end of the coaxial cable into the connector

previously used for the aerial on the television.

5 To obtain better quality pictures and sound on your television, you

can also connect your DVD-VCR to the television via the RCA cable (see section below) if your television is equipped with this type of connection.

Connecting DVD-VCR to the TV using the RCA Cable

T V

Aerial

Connecting Other Equipment to Your DVD-VCR

You can connect other audio and/or video equipment to your VCR in different ways. The following illustrations give a few examples of the connection possibilities.

➢ The RCA input/output connectors on the front of the VCR are used

for equipment, such as camcorders, VCRs or sound systems.

Camcorder

VCR

REAR OF THE VCR

Sound system

RF coaxial cable

You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on the television. You thus:

◆ Obtain better quality sound and pictures

◆ Simplify the setting up procedure of your DVD-VCR

☛ ◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.

Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

◆ Make sure that both the television and the DVD-VCR are switched

o f f before connecting the cables.

1 Connect the coaxial cable as indicated in the above section. 2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear

of the VCR.

3 Plug the other end into the appropriate connector on the television.

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 12

Connecting the Audio Output Cable

You can connect your DVD-VCR to a Hi-Fi system. Example: You wish to take advantage of the quality of your Hi-Fi

☛ ◆ Regardless of the type of connection chosen, you

stereo system when watching a programme or recording via your DVD-VCR.

must always connect the coaxial cable supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

◆ Make sure that both the television and the DVD-VCR are switched

1 Connect the coaxial cable or RCA as indicated on page 11.

2 Plug the audio output cable into the audio connectors on the rear

of your DVD-VCR.

➢ Respect the colour coding of the left and right channels.

3 Plug the other end of the audio cable into the appropriate input

connectors on your Hi-Fi stereo system.

Plug & Auto Set Up

Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in

memory. The process takes a few minutes. Your DVD-VCR will then be ready for use.

off before connecting the cables.

Tuning Your Television for the DVD-VCR

You must tune your television for the DVD-VCR only if you are not using a RCA cable

➢ To view pictures from your DVD-VCR when a RCA cable

is used, the television must be set to the audio/video mode (AV).

1 Switch on the television. 2 Switch on the DVD-VCR by pressing STANDBY/ON on the front of

the DVD-VCR or STANDBY/ON on the remote control.

3 Select a programme position on the television to be reserved for

use with your DVD-VCR.

4 Insert the video cassette in the DVD-VCR. Check that the

DVD-VCR starts reading the cassette; if not, press

5 Start a scan on your television or set the television to UHF

channel 36 (Australia:UHF 38 CH).

6 Fine tune the television until the pictures and sound are obtained

clearly.

7 If you cannot find the pictures and sound, or there is interference

from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 19 and Problems and Solutions on page

66).

8 When the picture and sound are perfectly clear, store this channel

at the desired programme position on the television. Result: That programme is now reserved for use with your

DVD-VCR.

button

1 Connect the coaxial cable as indicated on page 10.

(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)

2 Plug the DVD-VCR into the mains. It will automatically tune itself

in and store TV stations in the memory.

3 The process will finish after a few minutes. Then the DVD-VCR

automatically switches itself off.

➢ Now, you only have to switch the DVD-VCR on and it is

ready for use.

☛ Function for “Plug & Auto Set Up” is fixed already.

So if you want to change this fixed one, you can change

it by Presetting the Stations Automatically in OSD “ Auto Set Up” menu. (see page 20)

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 14

Deck Control Keys

The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck.

1 STANDBY/ONButton

Press the STANDBY/ON button on the remote control or front panel to turn on the DVD-VCR.

2 DVD Button

Press the DVD button on the remote control when you want to control the DVD deck.

◆ The DVD indicator will light on the Front Panel Display to show

that the DVD deck is selected.

3 VCR Button

Press the VCR button on remote control when you want to control the VCR deck.

◆ The VCR indicator will light on the Front Panel Display to show

that VHS deck is selected.

4 DVD-VCR Toggle

Press the DVD-VCR button on the front panel to toggle control between the DVD deck and the VCR deck.

5 The TV VIEW Key

Press the TV VIEW key repeatedly to cycle through all of your input sources, including the DVD, VCR, Tuner (PR##), LINE.

➢ Before using the VCR operation of 13~42 pages, press

the VCR button on the remote control to select VCR mode.

Before using the DVD operation of 43~61 pages, press the TV VIEW button on the remote control to select and watch DVD.

Basic TV Tuner Operations

The following buttons are used when watching television via the DVD-VCR’s built-in TV tuner.

1 TV/VCRButton

This button does not active this model. It is only used for Europe Scart model.

2 PROG Up/Down Button

Press to change to the next or previous channel.

3 0-9 Buttons

Press to select channels directly.

4 Last Program

Press to jump directly to the previously viewed channel.

5 Volume/Mute

Press to adjust the volume of the program you are watching. Press Mute to toggle the sound on and off.

◆ Also works in DVD and VCR mode.

6 Display

Press to display the channel you are watching.

◆ Also works in DVD and VCR mode.

01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 16

Copying from DVD to VCR

The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button.

If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision® encoded DVDs.

1 Insert Disc

Insert the disc you wish to copy in the DVD deck and close the drawer.

2 Insert VHS Tape

Insert a blank VHS videotape into the VCR deck.

3 Copy the DVD to VHS Tape

Press the COPY button on the DVD-VCR front panel.

◆ The DVD will go into Play mode and the VCR will go into Record

mode.

◆ If the DVD disc menu appears, you may need to press the PLAY

button manually to begin copying.

4 Stop the Copy Process

When the DVD is finished playing, press the VCR button on the remote control and then press the STOP button to end the copy.

◆ You must stop the Copy process manually when the DVD movie

ends or the DVD may replay and record over and over again.

☛ For NTSC DVD or VCD copy

◆ Before starting the copy process, set the Quasi PAL to

Off in Display options of DVD SETUP MENU. (see page 61)

◆ If Quasi PAL is On, the copy process can not active.

◆ The copy is only active PAL tape system.

01479A DVD-V5000/XSA-GB2 9/5/56 8:04 AM Page 17

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆ Purchase the DVD-VCR

◆ Find that the remote control is no longer working

correctly

1 Push the tab in the direction of the arrow to release the battery

compartment cover on the rear of the remote control.

2 Insert two AA, R6 or equivalent batteries, taking care to respect

the polarities:

◆ + on the battery with + on the remote control

◆ – on the battery with – on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pushing it back into place.

➢ Do not mix different battery types (manganese and

alkaline for example).

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:

◆ Automatically stop programme recording

◆ Preset your DVD-VCR to record a programme

You must set the date and time when:

☛ ◆ Do not forget to reset the time when you change

automatically

◆ You purchase the DVD-VCR

◆ The power supply remains off for more than 60 minutes

clocks from winter to summer time and vice versa.

1 Press SETUP on the remote control.

Result: The programming menu is displayed.

2 Press the corresponding

CLOCK SET option.

3 Press the ENTER button to select this option.

Result: The CLOCK SET menu is displayed.

4 Press or to select the hour, minutes, day, month and year.

Result: The option selected flashes.

5 Press the or buttons to increase or decrease the value.

Result: The day of the week is displayed automatically.

➢ You can hold the or buttons down to scroll more

quickly through the values.

or , buttons to select the

6 On completion, press SETUP twice to exit the menu.

CLOCK SET

E N T E R E ND:S E T U P

12:00 1/JAN/2000

E ND:S E T U P

S A T

01479A DVD-V5000/XSA-GB2 9/5/56 8:04 AM Page 18

Displaying/Hiding On-Screen Information

Your DVD-VCR displays most information both on the DVD-VCR and the television.

Other models

You can choose to display or hide this information on the television screen (except for the Index, Programming MENU and

Timer functions, which cannot be hidden).

O S D : O N TAPE SELECT : E 1 8 0 COLOUR SYSTEM : A U T O I P C : O N N I C A M RECORD SOURCE : A U T O

: O N

E ND:S E T U P

Australia model

O S D : O N TAPE SELECT : E 1 8 0 COLOUR SYSTEM : A U T O I P C : O N RECORD SOURCE : A U T O

E ND:S E T U P

1 Press SETUP on the remote control.

Result: The programming menu is displayed.

2 Press the corresponding

USER SET option.

3 Press the ENTER button to select this option.

Result: The USER SET menu is displayed.

4 Press the corresponding or buttons, until the cursor is placed

in front of the O S D option.

5 To... Press or , until...

Display on-screen information O N is displayed. Hide on-screen information O F F is displayed.

6 On completion, press SETUP twice to exit the menu.

Choosing Your Language

You can change the language in which information is displayed on the screen.

1 Press SETUP on the remote control.

Result: The programming menu is displayed.

LANGUAGE SET

E N T E R E ND:S E T U P

E N G L I S H E S P A Ñ O L D E U T S C H D U T C H F R A N Ç A I S I T A L I A N O

M E M O R Y:E N T E R

E N D:S E T U P

2 Press the corresponding

LANGUAGE SET option.

3 Press the ENTER button to select this option.

Result: The LANGUAGE SET menu is displayed.

4 Select the required language by pressing the or buttons. 5 Press ENTER to store the language selected. 6 Press SETUP to exit the menu.

Result: From now on, all the on-screen information will be

displayed in the language selected.

or , buttons to select the

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the DVD-VCR output channel to adjust the frequency in which information is displayed on the screen.

1 Press SETUP on the remote control.

Result: The programming menu is displayed.

2 Press the corresponding

I N S T A L L A T I O N option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the or buttons, until the cursor is placed in front of the

VCR OUTPUT CH option.

5 Select the required output channel (CH21~CH69) by pressing the

or buttons (Australia:CH28 ~ CH69).

6 On completion, press SETUP twice to exit the menu.

Then tune your television again (see page 13).

or , buttons to select the

Selecting the RF OUT Sound Mode (OPTION)

You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR.

1 Press MENU on the remote control.

Result: The programming menu is displayed.

2 Press the corresponding

I N S T A L L A T I O N option.

3 Press the OK button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the corresponding or buttons, until the cursor is placed

in front of the TV SYSTEM option.

Press the button to select G or K.

or , buttons to select the

6 On completion, press MENU twice to exit the menu.

➢ ◆ This option is not available Australia model.

Other models

AUTO SET UP MANUAL SET UP TV SYSTEM : G VCR OUTPUT CH: C H 3 6 DVD OUT : C O M P O N E N T

E ND:S E T U P

Australia model

AUTO SET UP MANUAL SET UP VCR OUTPUT CH: C H 3 8 DVD OUT : C O M P O N E N T

E ND:S E T U P

I N S T A L L A T I O N

E N T E R E ND:S E T U P

AUTO SET UP MANUAL SET UP TV SYSTEM : G VCR OUTPUT CH: C H 3 6 DVD OUT : C O M P O N E N T

E ND:S E T U P

01479A DVD-V5000/XSA-GB2 9/5/56 8:04 AM Page 20

Presetting the Stations Automatically

Other models

AUTO SET UP MANUAL SET UP TV SYSTEM : G VCR OUTPUT CH: C H 3 6 DVD OUT : C O M P O N E N T

Australia model

AUTO SET UP

MANUAL SET UP

VCR OUTPUT CH: C H 3 8

DVD OUT : C O M P O N E N T

YOUR DATA WILL BE LOST

PRESS E N T E R TO CONTINUE

AUTO SET UP

PLEASE WAIT

I - - - - - - - - - - - - - - - - - - - - I

2,3

E ND:S E T U P

S E T U P TO EXIT

E ND:S E T U P

Presetting the Stations Manually

☛ You do not need to preset the stations if you have already

set them automatically (see Plug & Auto Set Up on page 12).

Your DVD-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

◆ Plug & Auto Set up (see page 12)

◆ Automatically

◆ Manually (see page 21)

You can store up to 99 stations.

1 Press the SETUP button on the remote control.

Result: The programming menu is displayed.

2 Press the corresponding

I N S T A L L A T I O N option.

3 Press the ENTER button to select this option.

Result: The INSTALLATION menu is displayed.

4 Press the corresponding or buttons, until the cursor is placed

in front of the And then press the button to select this option. Result: A message appears, indicating that any channels

5 Press ENTER to start the auto scanning.

Result: ◆ The PLEASE WAITindication flashes on the

➢ The number of stations automatically stored by the DVD-

6 If you wish to cancel the auto scanning before the end, press the

SETUP button three times to exit the menu.

➢ ◆ Once the auto scanning procedure has finished, some

AUTO SET UP option.

already preset on your DVD-VCR will be deleted.

television screen.

◆ The first frequency band is scanned and the first

station found is displayed and stored.

◆ The DVD-VCR then searches for the second station

and so on.

◆ When the automatic scanning procedure has

finished, the DVD-VCR switches automatically to programme 1.

VCR depends on the number of stations that it has found.

stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (see page 22).

or , buttons to select the

☛ You do not need to preset the stations manually if you

have already set them automatically.

1 Press the SETUP button on the remote control.

Result: The programming menu is displayed.

2 Press the corresponding

I N S T A L L A T I O N option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the corresponding or buttons, until the cursor is placed

in front of the MANUAL SET UP option.

5 Press the button to select a MANUAL SET UP option.

Result: The TV STATION TABLE menu is displayed.

6 Press the or buttons to select a programme number as

required.

7 Press the button to preset the station.

Result: The MANUAL SET UP menu is displayed.

8 Press the or buttons to start scanning.

Result: The frequency band is scanned and the first station

found is displayed.

9 Press the or buttons until the cursor is placed in front of the

N A M E.

The station name is set automatically from the broadcast signal.

10 To change the programme’s name, press the button.

Result: The first letter of the name flashes.

or , buttons to select the

11 To... Then...

Select a character Press the orbutton until the in the name required character is displayed

Move to the next or Press the or buttons previous character respectively.

(letters, numbers or “-” character).

12 If you... Then...

Wish to store the ◆ Press the or buttons to place the station displayed cursor in front of the M F T.

Do notwish to ◆ Press the or buttons until the store the station cursor is placed in front of the C H. displayed ◆ Press the or buttons to go on

13 Repeat this procedure from Step 6 onwards, until all the required

stations have been stored.

14 On completion, press the SETUP button three times to exit the

menu.

◆ Press the

picture, if necessary.

◆ Press OK to store the station

scanning the frequency band and display

the next station

◆ Go back to the beginning of Step 12

or buttons to adjust the

I N S T A L L A T I O N

E N T E R E ND:S E T U P

Other models

AUTO SET UP MANUAL SET UP TV SYSTEM : G VCR OUTPUT CH: C H 3 6 DVD OUT : C O M P O N E N T

E ND:S E T U P

Australia model

AUTO SET UP MANUAL SET UP VCR OUTPUT CH: C H 3 8 DVD OUT : C O M P O N E N T

E ND:S E T U P

** TV STATION TABLE **

P R CH NAME

1 - - - - - - 2 - - - - - - 3 - - - - - - 4 - - - - - - 5

S E T : S O R T :E N T E R

D E L E T E :C L E A R S E T U P

MANUAL SET UP

* *

P R : 1 C H : --M F T : N A M E : ----

* *

M E M O R Y :E N T E R

E N D:S E T U P

01479A DVD-V5000/XSA-GB2 9/5/56 8:04 AM Page 22

Clearing a Preset Station

I N S T A L L A T I O N

E N T E R E ND:S E T U P

Other models

AUTO SET UP MANUAL SET UP TV SYSTEM : G VCR OUTPUT CH : C H 3 6 DVD OUT : C O M P O N E N T

E ND:S E T U P

Australia model

AUTO SET UP MANUAL SET UP VCR OUTPUT CH:CH38 DVD OUT : C O M P O N E N T

E ND:S E T U P

** TV STATION TABLE **

P R CH NAME

1 0 2 1 - - - 2 0 2 5 - - - 3 0 3 0 - - - 4 0 6 5 - - - 5 0 5 5 - - - -

S E T : S O R T :E N T E R

D E L E T E :C L E A R S E T U P

If you have stored a TV station:

◆ That you do not require

◆ At the wrong programme position

you can cancel it.

1 Press the SETUP button on the remote control. 2 Press the corresponding

I N S T A L L A T I O N option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the corresponding or buttons, until the cursor is placed

in front of the MANUAL SET UP option.

5 Press the button to select this option.

Result: The TV STATION TABLE menu is displayed.

6 Press the corresponding or buttons, until the cursor is placed

in front of the required preset TV station. (P R)

or , buttons to select the

7 Press the CLEAR button. 8 Repeat the same procedure from Step 6 onwards until all the

required stations have been cleared.

9 On completion, press the SETUP button three times to exit the

menu.

Changing the Preset Station Table

You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences.

1 Press the SETUP button on the remote control. 2 Press the corresponding

I N S T A L L A T I O N option.

3 Press the ENTER button to select this option.

Result: The I N S T A L L A T I O N menu is displayed.

4 Press the corresponding or buttons, until the cursor is placed

in front of the MANUAL SET UP option.

5 Press the button to select this option.

Result: The TV STATION TABLE menu is displayed.

6 Press the corresponding or buttons, until the cursor is placed

in front of the required preset TV programme. Result: The selected station is displayed at the same time on

the television screen.

7 To change the programme number assigned to a station (PR4

instead of PR1 for example):

◆ Press ENTER

◆ Press the

the programme to which the station is to be moved

◆ Press ENTER again

8 You can modify this station by repeating the same procedure from

Step 6 onwards.

9 On completion, press the SETUP button three times to exit the

menu.

or buttons until the cursor is placed in front of

or , buttons to select the

TV STATION TABLE

P R CH NAME

1 0 2 1 - - - 2 0 2 5 - - - 3 0 3 0 - - - 4 0 6 5 - - - 5

S E T : S O R T :E N T E R

D E L E T E :C L E A R S E T U P

TV STATION TABLE

P R CH NAME

1 0 2 1 - - - 2 0 2 5 - - - -

3 0 3 0 - - - -

4 (0 6 5 ---- )

(SORT : 4 E X E C U T E :E N T E R S E T U P

TV STATION TABLE

P R CH NAME

1 ( 0 6 5 ---- ) 2 0 2 5 - - - 3 0 3 0 - - - 4 0 6 5 ---5

(SORT : 4 E X E C U T E :E N T E R S E T U P

TV STATION TABLE

P R CH NAME

1 0 6 5 - - - 2 0 2 1 - - - 3 0 2 5 - - - 4 0 3 0 - - - 5

S E T : S O R T :E N T E R

D E L E T E :C L E A R S E T U P

➛

4 )

1 )

* *

01479A DVD-V5000/XSA-GB2 9/5/56 8:04 AM Page 24

Selecting the Cassette Type

Other models

O S D : O N TAPE SELECT : E 1 8 0 COLOUR SYSTEM : A U T O I P C : O N N I C A M RECORD SOURCE : A U T O

: O N

E ND:S E T U P

Australia model

O S D : O N TAPE SELECT : E 1 8 0 COLOUR SYSTEM : A U T O I P C : O N RECORD SOURCE : A U T O

E ND:S E T U P

Selecting the Recording Speed

ype Recording Time (in SP) E-180 180 mins. or 3 hours E-240 240 mins. or 4 hours E-260 260 mins. or

4 hours and 20 mins.

E-300 300 mins. or 5 hours

If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.

1 Press SETUP on the remote control.

Result: The programming menu is displayed.

2 Press the corresponding

USER SET option.

or , buttons to select the

3 Press the ENTER button to select this option. 4 Press the corresponding or buttons, until the cursor is placed

in front of the

5 Press the or buttons as many times as required, until the

correct cassette length is displayed.

TAPE SELECT option.

E180 E240 E 300 E260

6 Press SETUP twice to exit the menu.

You can record a cassette at two different speeds:

◆ SP (Standard Play)

◆ LP (Long Play)

In Long Play modes:

◆ Each cassette lasts twice as long

◆ The recording is of a slightly lower quality

To record a cassette... Press the SPEED button on the

In standard play mode S Pis displayed. In long play mode L P is displayed.

remote control, until...

NICAM(OPTION)

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 33.

1 Press SETUP on the remote control.

Result: The programming menu is displayed.

2 Press the corresponding

or , buttons to select the

USER SET option.

3 Press the ENTER button to select this option.

Result: The USER SET menu is displayed.

4 Press the corresponding or buttons, until the cursor is

placed in front of the N I C A M option.

5 To... Press or , until...

Mono mode O F F is displayed.

NICAM mode O N is displayed.

OFF: Only set at this position to record the

standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.

ON: Normally set at this position.

6 On completion, press SETUP twice to exit the menu.

➢ ◆ This option is not available Australia model.

USER SET

E N T E R E ND:S E T U P

O S D : O N TAPE SELECT : E 1 8 0 COLOUR SYSTEM : A U T O I P C : O N N I C A M RECORD SOURCE : A U T O

: O N

E ND:S E T U P

+ 30 hidden pages