Samsung SV-630B, SV-6333X, SV-630X, SV-6353X, SV-6313X Service Manual
...
VIDEO CASSETTE RECORDER
SV-637B/630B/630G/626I/630X
SV-6353X/6333X/6313X/2353X/2333X/2303X
SV-450G/435G/234G/233G/132G/131G/130G/130W
SV-4353G/4303G/2303G
SV-D620K/D600/D80K/D35K/D30K/D12K/D10K/5D
SV-1000S(HCII)/A90G(HCII)/A70G(HCIV)/A220G
SERVICE
1. Precautions
2. Alignment and Adjustment
3. Exploded View and Parts List
4. Electrical Parts List
5. Schematic Diagrams
Manual
VIDEO CASSETTE RECORDER CONTENTS
For mechanical disassembly and adjustment, refer to the “Mechanical Manual” (DX-9R AC68-00001A).
SERVICE MANUAL
SV-637B/630G/626S/630X/6353X/6333X/2353X/4353G/2303G/450G/234G/130W/D620K/1000S(HCII)
ELECTRONICS
© Samsung Electronics Co., Ltd. MAY. 2000
Printed in Korea
AC68-00956A
SV-637B/630G/D620K/D600/626I/1000S(HCII)
SV-2333X/130G
SV-132G/131G
SRC PLAY
STANDBY/ON
REC STOP
PROG
EJECT
STANDBY/ON
REW F.F
PLAY
EJECT
STANDBY/ON
REW F.F
PLAY
PROG
REC STOP
SV-630B/630X/450G
SV-435G/D80K/A90G(HCII)
SV-D12K
SV-6353X/6333X/6313X/2353X/2303X/4353G/4303G/2303G/234G/233G/130W/D35K/D10K/5D/A70G(HCIV)
SV-D30K
SV-A220G
EJECT
POWER
PROG
REC STOP
LINE IN 2
VIDEO AUDIO
PLAY
STANDBY/ON EJECT STOP
REC
SHARPNESS
IMPORTANT SERVICE GUIDE
3 MODE SWITCH (PROGRAM SWITCH) ASSEMBLY POINT
1) When installing the ass’y full deck on the Main PCB, be sure to align the assembly point of mode switch.
ASSEMBLY POINT
Fig. 1
3 HOW TO EJECT THE CASSETTE TAPE
(If the unit does not operate on condition that tape is inserted into housing ass’y)
1) Remove the Holder Worm Œ and the gear worm ´. (See Fig. 2)
2) Turn the Gear Worm Wheel ˇ counterclockwise in the direction of arrow with screw driver. (See Fig. 2)
3) When Slider S, T are approached in the position of unloading, rotate holder Clutch counterclockwise after inserting screw driver in the
hole of frame’s bottom in order to wind the unwounded tape. (Refer to Fig. 3)
(If you rotate Gear Worm Wheel continuously when tape is in state of unwinding, you may cause a tape contamination by grease and
tape damage. Be sure to wind the unwounded tape in the state of set horizontally.)
4) Rotate Gear Worm Wheel ˇ counterclockwise using screw driver again up to the state of eject mode and then pick out the tape.
(Refer to Fig. 2)
Fig. 2 Fig. 3
ΠHOLDER WORM
´ GEAR WORM
SCREW DRIVER
ˇ GEAR WORM WHEEL
FRAME
Samsung Electronics 1-1
1. Precautions
1. Be sure that all of the built-in protective devices are
replaced. Restore any missing protective shields.
2. When reinstalling the chassis and its assemblies, be
sure to restore all protective devices, including :
control knobs and compartment covers.
3. Make sure that there are no cabinet openings
through which people--particularly children
--might insert fingers and contact dangerous
voltages. Such openings include the spacing
between the picture tube and the cabinet mask,
excessively wide cabinet ventilation slots, and
improperly fitted back covers.
If the measured resistance is less than 1.0 megohm
or greater than 5.2 megohms, an abnormality exists
that must be corrected before the unit is returned
to the customer.
4. Leakage Current Hot Check (See Fig. 1-1) :
Warning : Do not use an isolation transformer
during this test. Use a leakage current tester or a
metering system that complies with American
National Standards Institute (ANSI C101.1,
Leakage Current for Appliances), and Underwriters
Laboratories (UL Publication UL1410, 59.7).
5. With the unit completely reassembled, plug the AC
line cord directly the power outlet. With the unitÕs
AC switch first in the ON position and then OFF,
measure the current between a known earth
ground (metal water pipe, conduit, etc.) and all
exposed metal parts, including : antennas, handle
brackets, metal cabinets, screwheads and control
shafts. The current measured should not exceed
0.5 milliamp. Reverse the power-plug prongs in the
AC outlet and repeat the test.
6. X-ray Limits :
The picture tube is designed to prohibit X-ray
emissions. To ensure continued X-ray protection,
replace the picture tube only with one that is the
same type as the original.
Fig. 1-1 AC Leakage Test
7. Antenna Cold Check :
With the unitÕs AC plug disconnected from the
AC source, connect an electrical jumper across the
two AC prongs. Connect one lead of the ohmmeter
to an AC prong.
Connect the other lead to the coaxial connector.
8. High Voltage Limit :
High voltage must be measured each time
servicing is done on the B+, horizontal deflection
or high voltage circuits.
Heed the high voltage limits. These include the
X-ray protection Specifications Label, and the
Product Safety and X-ray Warning Note on the
service data schematic.
9. Some semiconductor (Òsolid stateÓ) devices are
easily damaged by static electricity.
Such components are called Electrostatically
Sensitive Devices (ESDs); examples include
integrated circuits and some field-effect transistors.
The following techniques will reduce the
occurrence of component damage caused by static
electricity.
10. Immediately before handling any semiconductor
components or assemblies, drain the electrostatic
charge from your body by touching a known
earth ground. Alternatively, wear a discharging
Wrist-strap device. (Be sure to remove it prior to
applying power--this is an electric shock
precaution.)
DEVICE
UNDER
TEST
(READING SHOULD
NOT BE ABOVE
0.5mA)
LEAKAGE
CURRENT
TESTER
EARTH
GROUND
TEST ALL
EXPOSED METER
SURFACES
ALSO TEST WITH
PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)
2-WIRE CORD
Precautions
1-2 Samsung Electronics
11. High voltage is maintained within specified limits
by close-tolerance, safety-related components and
adjustments. If the high voltage exceeds the
specified limits, check each of the special
components.
12. Design Alteration Warning :
Never alter or add to the mechanical or electrical
design of this unit. Example : Do not add
auxiliary audio or video connectors.
Such alterations might create a safety hazard.
Also, any design changes or additions will void
the manufacturerÕs warranty.
13. Hot Chassis Warning :
Some TV receiver chassis are electrically
connected directly to one conductor of the AC
power cord. If an isolation transformer is not
used, these units may be safely serviced only if
the AC power plug is inserted so that the chassis
is connected to the ground side of the AC source.
To confirm that the AC power plug is inserted
correctly, do the following : Using an AC
voltmeter, measure the voltage between the
chassis and a known earth ground. If the reading
is greater than 1.0V, remove the AC power plug,
reverse its polarity and reinsert. Re-measure the
voltage between the chassis and ground.
14. Some TV chassis are designed to operate with 85
volts AC between chassis and ground, regardless
of the AC plug polarity. These units can be safely
serviced only if an isolation transformer inserted
between the receiver and the power source.
15. Never defeat any of the B+ voltage interlocks.
Do not apply AC power to the unit (or any of its
assemblies) unless all solid-state heat sinks are
correctly installed.
16. Always connect a test instrumentÕs ground lead to
the instrument chassis ground before connecting
the positive lead; always remove the instrumentÕs
ground lead last.
17. Observe the original lead dress, especially near
the following areas : Antenna wiring, sharp
edges, and especially the AC and high voltage
power supplies. Always inspect for pinched, outof-place, or frayed wiring. Do not change the
spacing between components and the printed
circuit board. Check the AC power cord for
damage. Make sure that leads and components
do not touch thermally hot parts.
18. Picture Tube Implosion Warning :
The picture tube in this receiver employs
Òintegral implosionÓ protection. To ensure
continued implosion protection, make sure that
the replacement picture tube is the same as the
original.
19. Do not remove, install or handle the picture tube
without first putting on shatterproof goggles
equipped with side shields. Never handle the
picture tube by its neck. Some Òin-lineÓ picture
tubes are equipped with a permanently attached
deflection yoke; do not try to remove such
Òpermanently attachedÓ yokes from the picture
tube.
20. Product Safety Notice :
Some electrical and mechanical parts have special
safety-related characteristics which might not be
obvious from visual inspection. These safety
features and the protection they give might be
lost if the replacement component differs from the
original--even if the replacement is rated for
higher voltage, wattage, etc.
Components that are critical for safety are
indicated in the circuit diagram by shading,
( or ).
Use replacement components that have the same
ratings, especially for flame resistance and
dielectric strength specifications. A replacement
part that does not have the same safety
characteristics as the original might create shock,
fire or other hazards.
Samsung Electronics
2-1
2. Alignment and Adjustment
2-1 Reference
1) X-Point (Tracking center) adjustment, “Head switching adjustment” and “NVRAM option setting” can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the “Head switching adjustment” and
“NVRAM option setting”.
3) When replacing the cylinder ass’y, be sure to adjust the “X-Point” and “Head switching adjustment”.
4) Among Samsung VCR remote control used for adjustment as a accessory, only the remote control that has figures buttons (0 ~ 9) is
available for all adjustment regardless of chassis.
5) How to adjustment.
- Press the “SW718 (TEST)” button on Main PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.
2-1-1 Location of adjustment button of remote control
Fig. 2-1
<This type of remote control can adjust.>
Remote Control for adjustment is not supplied as a Service Jig.
VCR STANDBY/ON
TV STANDBY/ON
TV
SLOW
VCR
DISP./
SHUTTLE
V-LOCK
CLR/RST F.ADV
-/--
INPUT INDEX
VOL PROG/TRK
R
E
C
M
E
N
U
A
U
D
I
O
S
P
E
E
D
D
U
B
REPEAT
OK
SAT
X-Point (Tracking Center)
Adjustment ("5" Button)
Head Switching Adjustment
("SPEED" Button)
NVRAM Option Setting
("MENU" Button)
<This type of remote control can not adjust.>
R
E
P
E
A
T
POWER DISPLAY
CNT.RESET SPEED
IIP/S IPC
TRK
REC MENU
2-2
Samsung Electronics
Alignment and Adjustment
2-1-2 SW718 (TEST) location for adjustment mode setting
Fig. 2-2 Main PCB (Top View)
PRESS
Alignment and Adjustment
Samsung Electronics
2-3
2-2 Mechanical Adjustment
Note : Refer to the Mechanical Manual “DX-9R (AC68-00001A)” for the adjustment and confirmation of
ass’y full deck.
2-2-1 The number and position of test point
Test point : TP601 (H’D S/W -Trigger) TP301 (Video output)
TP602 (Control Pulse) TP302 (Audio output)
TP303 (Envelope)
Fig. 2-3 Location of Test point (Main PCB-Top View)
AUDIO OUTPUT
HEAD SWITCHING
ENVELOPE
2-2-2 ACE Head Position (X-Point) Adjustment
(See the 2-2-1(d) ACE Head Position (X-Point) Adjustment
on page 2-2 of the Mechanical Manual)
1) Playback the alignment tape (Color bar).
2) Press the “SW718 (TEST)” button on Main PCB to
set the adjustment mode. (See Fig. 2-2)
3) Press the “5” button of remote control then
adjustment is operated automatically. (See Fig. 2-1)
4) Connect the CH-1 probe to TP303 (Envelope) the
CH-2 probe to TP601 (H’D switching pulse) and
then trigger to CH-1.
5) Insert the (-) driver into the X-Point adjustment
hole and adjust it so that envelope waveform is
maximum.
6) Turn the Power off.
2-4
Samsung Electronics
Alignment and Adjustment
2-3 Head Switching Point Adjustment
1) Playback the alignment tape.
2) Press the “SW718 (TEST)” button on Main PCB to set the adjustment mode. (See Fig. 2-2)
3) Press the “SPEED” button of remote control then adjustment is operated automatically. (See Fig. 2-1)
4) Turn the Power off.
2-4 NVRAM Option Setting
1) Press the “SW718 (TEST)” button on Main PCB to set the adjustment mode. (See Fig. 2-2)
2) Press the “MENU” button on the remote control about 5 seconds then option setting display is appeared.
(See Fig. 2-4)
3) Select the option number (See Table 2-1 ; Page 2-5) of corresponding model with “FF” and “REW” button on
the remote control.
4) If selecting the option number is completed, press the “PLAY” button of remote control.
(If “PLAY” button is pressed, the selected number is changes reversed color. ; See Fig. 2-4)
5) Press the “OK” button of remote control again to store the option number.
(“PLEASE WAIT” is displayed for a second as shown Fig. 2-5 and this setting is completed.)
6) Turn the Power off.
1) NVRAM Option is adjusted at production line basically.
2) In case Micom (IC601) and NVRAM (IC605 ; EEPROM) is replaced, be sure to set the corresponding option number of the repaired
model. (If the option is not set, the unit is not operated.)
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56
**
OPTION DIODE
**
CNG : SAVE : OK
Fig. 2-4
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56
**
OPTION DIODE
**
CNG : SAVE : OK
PLEASE WAIT
Fig. 2-5
Alignment and Adjustment
Samsung Electronics
2-5
<Table 2-1 NVRAM Option Number>
COUNTRY MODELS OPTION NUMBER
Germany SV-6333X 2, 5, 7, 8, 9, 10, 12, 13, 14, 18, 22, 23, 24, 29, 32, 35, 37, 39, 40, 46, 50, 53, 54
SV-2333X 2, 5, 7, 16, 18, 22, 23, 24, 29, 32, 35, 37, 39, 50, 53, 54
SV-2303X 7, 18, 22, 24, 29, 32, 35, 37, 39, 40, 50, 54
Sweden SV-6353X 2, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 18, 22, 23, 24, 29, 30, 31, 35, 39, 40, 41, 44, 46, 50, 53, 54
Finland SV-6313X 5, 6, 8, 9, 10, 12, 13, 14, 15, 18, 22, 23, 29, 30, 31, 35, 39, 40, 46, 50, 53, 54
Norway SV-2353X 2, 5, 6, 7, 18, 22, 23, 24, 29, 30, 31, 35, 39, 40, 50, 53, 54
SV-2303X 18, 22, 29, 30, 31, 35, 37, 39, 40, 50, 54
Hungary SV-4353G 2, 5, 6, 7, 8, 11, 12, 18, 22, 23, 25, 31, 32, 35, 39, 40, 48, 50, 53, 54
SV-4303G 8, 11, 12, 18, 22, 25, 31, 32, 35, 37, 39, 40, 48, 50, 54
SV-2303G 11, 18, 22, 25, 31, 32, 35, 37, 39, 40, 48, 50, 54
Poland SV-4353G 2, 5, 6, 7, 8, 11, 12, 18, 22, 23, 25, 31, 35, 39, 40, 48, 50, 53, 54
SV-4303G 8, 11, 12, 18, 22, 25, 31, 35, 37, 39, 40, 48, 50, 54
SV-2303G 11, 18, 22, 25, 31, 35, 37, 39, 40, 48, 50, 54
Bulgaria SV-130W 9, 10, 17, 18, 22, 29, 31, 32, 34, 37, 38, 40, 42, 55
Australia SV-637B 1, 6, 8, 9, 12, 13, 14, 16, 17, 18, 20, 21, 22, 25, 27, 29, 31, 32, 36, 37, 41, 44, 46, 50, 54
SV-630B 1, 6, 8, 9, 12, 13, 14, 17, 18, 22, 25, 27, 29, 31, 32, 35, 38, 41, 44, 46, 50, 54
Newzealnad SV-630X 1, 6, 8, 12, 13, 14, 15, 17, 18, 22, 25, 26, 29, 31, 32, 35, 38, 41, 44, 46, 50, 54
Thailand SV-D600 6, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18, 22, 25, 26, 29, 31, 32, 36, 37, 41, 42, 46, 50, 54
U.A.E. SV-630G 6, 8, 11, 12, 13, 14, 15, 16, 17, 18, 20, 22, 25, 26, 30, 31, 32, 36, 37, 41, 42, 46, 48, 50, 54
SV-435G 6, 8, 11, 12, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 41, 42, 48, 50, 54
SV-234G 6, 8, 11, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 39, 40, 42, 48, 50, 54
SV-233G 6, 11, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 39, 40, 42, 48, 50, 54
SV-130G 8, 9, 10, 11, 17, 18, 20, 22, 29, 31, 32, 34, 37, 42
SV-131G 9, 10, 11, 17, 18, 20, 22, 29, 31, 32, 34, 38, 40, 42
SV-132G 8, 9, 10, 11, 17, 18, 20, 22, 29, 31, 32, 34, 38, 40, 42
Lebanon SV-630G 6, 8, 11, 12, 13, 14, 15, 16, 17, 18, 20, 22, 25, 26, 30, 31, 32, 36, 37, 41, 42, 46, 48, 50, 54
SV-435G 6, 8, 11, 12, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 41, 42, 48, 50, 54
SV-132G 8, 9, 10, 11, 17, 18, 20, 22, 29, 31, 32, 34, 38, 40, 42
Syria SV-630G 6, 8, 11, 12, 13, 14, 15, 16, 17, 18, 20, 22, 25, 26, 30, 31, 32, 36, 37, 41, 42, 46, 48, 50, 54
SV-435G 6, 8, 11, 12, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 41, 42, 48, 50, 54
SV-234G 6, 8, 11, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 39, 40, 42, 48, 50, 54
Iran
SV-1000S(HCII)
6, 8, 11, 12, 13, 14, 15, 16, 17, 18, 20, 22, 25, 26, 29, 36, 37, 41, 42, 44, 46, 48, 50, 54
SV-450G 8, 11, 12, 16, 17, 18, 20, 22, 25, 26, 29, 35, 39, 41, 42, 48, 50, 54
SV-A90G(HCII)
6, 8, 11, 12, 17, 18, 20, 22, 25, 26, 29, 35, 41, 42, 44, 48, 50, 54
SV-A70G(HCIV)
6, 8, 11, 17, 18, 20, 22, 25, 26, 29, 35, 39, 40, 41, 42, 48, 50, 54
SV-A220G 8, 9, 10, 11, 17, 18, 20, 22, 29, 31, 32, 34, 40, 42
Saudi Arabia SV-630G 6, 8, 11, 12, 13, 14, 15, 16, 17, 18, 20, 22, 25, 26, 30, 31, 32, 36, 37, 41, 42, 46, 48, 50, 54
SV-450G 8, 11, 12, 16, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 39, 41, 42, 48, 50, 54
SV-435G 6, 8, 11, 12, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 41, 42, 48, 50, 54
SV-234G 6, 8, 11, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 39, 40, 42, 48, 50, 54
SV-132G 8, 9, 10, 11, 17, 18, 20, 22, 29, 31, 32, 34, 38, 40, 42
Egypt SV-630G 6, 8, 11, 12, 13, 14, 15, 16, 17, 18, 20, 22, 25, 26, 30, 31, 32, 36, 37, 41, 42, 44, 46, 48, 50, 54
SV-435G 6, 8, 11, 12, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 41, 42, 48, 50, 54
SV-234G 6, 8, 11, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 39, 40, 42, 48, 50, 54
SV-132G 8, 9, 10, 11, 17, 18, 20, 22, 29, 31, 32, 34, 38, 40, 42
Ethopia SV-630G 6, 8, 11, 12, 13, 14, 15, 16, 17, 18, 20, 22, 25, 26, 30, 31, 32, 36, 37, 41, 42, 44, 46, 48, 50, 54
SV-435G 6, 8, 11, 12, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 41, 42, 48, 50, 54
SV-234G 6, 8, 11, 17, 18, 20, 22, 25, 26, 30, 31, 32, 35, 39, 40, 42, 48, 50, 54
Algeciras SV-D620K 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 25, 26, 29, 31, 32, 36, 37, 41, 44, 46, 50, 53, 54
SV-5D 9, 10, 11, 17, 18, 22, 29, 31, 32, 34, 37, 38, 40, 42
Tunis SV-D80K 5, 6, 8, 9, 10, 11, 12, 18, 19, 22, 23, 25, 26, 29, 31, 32, 35, 41, 50, 53, 54
SV-D30K 5, 6, 9, 10, 11, 18, 19, 22, 23, 25, 26, 29, 31, 32, 35, 38, 40, 50, 53, 54
SV-D10K 9, 10, 11, 17, 18, 19, 22, 29, 31, 32, 34, 37, 38, 40, 42
Kanya SV-D10K 9, 10, 11, 17, 18, 19, 22, 29, 31, 32, 34, 37, 38, 40, 42
2-6
Samsung Electronics
Alignment and Adjustment
<Table 2-1 NVRAM Option Number> - Continued
COUNTRY MODELS OPTION NUMBER
Reunion SV-D620K 5, 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 19, 22, 23, 25, 26, 29, 31, 32, 36, 37, 41, 44, 46, 50, 53, 54
SV-D80K 5, 6, 8, 9, 10, 11, 12, 18, 19, 22, 23, 25, 26, 29, 31, 32, 35, 41, 50, 53, 54
SV-D35K 5, 6, 9, 10, 11, 18, 19, 22, 23, 25, 26, 29, 31, 32, 35, 39, 40, 50, 53, 54
SV-D12K 9, 10, 11, 17, 18, 19, 22, 29, 31, 32, 34, 38, 42
SV-D10K 9, 10, 11, 17, 18, 19, 22, 29, 31, 32, 34, 37, 38, 40, 42
Morocco SV-D80K 5, 6, 8, 9, 10, 11, 12, 18, 19, 22, 23, 25, 26, 29, 31, 32, 35, 41, 50, 53, 54
SV-D35K 5, 6, 9, 10, 11, 18, 19, 22, 23, 25, 26, 29, 31, 32, 35, 39, 40, 50, 53, 54
SV-D12K 9, 10, 11, 17, 18, 19, 22, 29, 31, 32, 34, 38, 42
Algeria SV-D620K 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 25, 26, 29, 31, 32, 36, 37, 41, 44, 46, 50, 53, 54
South Africa SV-626I 6, 8, 9, 11, 12, 13, 14, 15, 16, 17, 18, 22, 25, 26, 29, 31, 32, 36, 37, 41, 42, 44, 46, 50, 54
Samsung Electronics 3-1
3. Exploded View and Parts List
3-1 Cabinet Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3-2 Mechanical Parts (Top Side) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3-3 Mechanical Parts (Bottom Side) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Page
3-2
3-6
3-8
Exploded View and Parts List
3-2 Samsung Electronics
3-1 Cabinet Assembly
S.N.A. : Service Not Available
157
153
FULL DECK (S.N.A.)
TM401B
200
MAIN PCB (S.N.A.)
BRACKET-FRAME
(S.N.A.)
CN602A
CN3A1S
S601S
LD601S
S602S
VFD/LED PCB (S.N.A.)
102
157
1
A2/NICAM PCB-OPTION
(S.N.A.)
101
155
156
156
157
SHUTTLE PCB (S.N.A.)
CN703A
F-A/V JACK PCB (S.N.A.)
21
22
31
1
52
52
158
1
21
22
1
21
22
UT01
SV-132G/131GSV-2333X/130G
VCR STANDBY/ON
TV STANDBY/ON
TV
SLOW
VCR
DISP./
SHUTTLE
V-LOCK
CLR/RST F.ADV
-/--
INPUT INDEX
VOL PROG/TRK
R
E
C
M
E
N
U
A
U
D
I
O
S
P
E
E
D
D
U
B
REPEAT
OK
SAT
R
E
P
E
A
T
STANDBY/ON DISPLAY
CNT.RESET SPEED
IIP/S IPC
TRK
REC MENU
SV-637B/630G/D620K/D600
SV-1000S(HCII)
SV-630B/630X/450G SV-435G/D80K/SV-A90G(HCII) SV-D12K
SV-6353X/6333X/6313X/2353X/2303X/4353G/4303G
SV-2303G/234G/130W/D35K/D10K/5D/A70G(HCIV)
SV-D30K SV-A220G
21
22
1
21
22
1
51
21
22
1
1
21
22
21
22
1
51
1
21
22
Exploded View and Parts List
Samsung Electronics 3-3
Loc. No Parts No. Description ; Specification Remark
1
Refer to table ; page 3-4
ASSY-PANEL FRONT;HIPS 94HB
21
Refer to table ; page 3-4
DOOR-CASSETTE
22 AC61-62032A SPRING-MASK;X-9,-,SUS,-,4.4,-,SV-C130
31
Refer to table ; page 3-4
DOOR FRONT-ASSY
51
Refer to table ; page 3-4
ASSY-SHUTTLE
52 62664-0021-00 ASSY-DAMPER
SV-637B/630G/D620K/D600/1000S(HCII) ONLY
101
Refer to table ; page 3-4
CABINET-TOP;X-9,SECC,PCM,0.5,360*208*41,
102 AC63-32128A COVER-BOTTOM;SV-C140F,SECC,387.7X197.6
153 AC60-12126A SCREW-BH;-,BH,-,4*12,FE,FZY,-,-,155 AC60-12134A SCREW-TAP BH;-,BH,-,2-4X16,-,FE
156 AC60-00001A SCREW-MACINE;-,BH,*4X12,M4,L12,BLK,SMC
157 AC60-10063A SCREW-TAPTITE;BH,+,-,M3,L12,ZPC3,SWRCH18
158 AC60-00069A SCREW-TAP;3X10,FE, FEY
200 AC39-10019A POWER CORD;KKP-419C,H03VVH2-F,VDE/KEMA-K
COMMON
AC39-10015A POWER CORD;KKP-560,H03VVH2-F,VDE/KEMA-KE
AUSTRALIA/NEWZEALAND ONLY
AC39-10200A POWER CORD;-,KJ-20,KJ-0201,1.83MT,CONNECT
THAILAND ONLY
CN3A1S 3809-001111 CABLE-FLAT;30V,80C,130mm,7P,1.25mm,UL289
CN602A 3809-001049 CABLE-FLAT;30V,80C,100mm,5P,1.25mm,UL289
CN703A 3809-001112 CABLE-FLAT;30V,80C,130mm,5P,1.25mm,UL289
SHUTTLE MODELS ONLY
LD601S AC61-21009A HOLDER-LED;-,POM(M90-44),-,BLK,-,X-9
S601S AC61-21008A HOLDER-SENSOR;-,POM(M90-44),-,BLK,-,X-9
S602S AC61-21008A HOLDER-SENSOR;-,POM(M90-44),-,BLK,-,X-9
TM401B
Refer to table ; page 3-4
CONNECTOR BOARD-ASSY;HIPS94
UT01
Refer to table ; page 3-4
REMOCON-ASSY
Exploded View and Parts List
3-4 Samsung Electronics
COUNTRY MODELS 1 21 31 51 101 TM401B UT01
Germany SV-6333X AC97-00946E AC64-00069M - - AC64-30899A AC61-00060B AC59-00017A
SV-2333X AC97-00999A AC64-00203T - - AC64-30899H AC61-00060G AC59-00017E
SV-2303X AC97-00946B AC64-00069N - - AC64-30899A AC61-00060H AC59-00017B
Sweden SV-6353X AC97-01077A AC64-00434A - - AC64-30899H AC61-00060B AC59-00016C
Finland SV-6313X AC97-00946C AC64-00069P - - AC64-30899H AC61-00060B AC59-00017G
Norway SV-2303X AC97-00946Q AC64-00069Z - - AC64-30899H AC61-00060H AC59-00017G
SV-2353X AC97-00946D AC64-00069Q - - AC64-30899H AC61-00060G AC59-00017E
Hungary SV-4353G AC97-00946F AC64-00069Q - - AC64-30899A AC61-00060G AC59-00017A
SV-4303G AC97-00946G AC64-00069S - - AC64-30899A AC61-00060H AC59-00017B
SV-2303G AC97-00946H AC64-00069T - - AC64-30899A AC61-00060H AC59-00017B
Poland SV-4353G AC97-00946F AC64-00069Q - - AC64-30899A AC61-00060G AC59-00017A
SV-4303G AC97-00946G AC64-00069S - - AC64-30899A AC61-00060H AC59-00017B
SV-2303G AC97-00946H AC64-00069T - - AC64-30899A AC61-00060H AC59-00017B
Bulgaria SV-130W AC97-00946J AC64-00069U - - AC64-30899A AC61-11061S AC59-00013B
Australia SV-637B AC97-00243G AC64-52158S AC64-00072Q - AC64-30899E AC61-00060E AC59-00010Q
SV-630B AC97-00157J AC64-00103V - - AC64-30899F AC61-00060E AC59-00016D
Newzealand SV-630X AC97-00157L AC64-00103X - - AC64-30899F AC61-00060E AC59-00016D
Thailand SV-D600 AC97-00243L AC64-52158W AC64-00072U - AC64-30899E AC61-00060E AC59-00016H
U.A.E. SV-630G AC97-00243J AC64-00097U AC64-00072S - AC64-30899E AC61-00060E AC59-00016H
SV-435G AC97-00157S AC64-00399G - AC97-00216J AC64-30899E AC61-11061V AC59-00016F
SV-234G AC97-00946K AC64-00069V - - AC64-30899E AC61-11061V AC59-00017B
SV-233G AC97-00946L AC64-00069W - - AC64-30899E AC61-11061V AC59-00017B
SV-130G AC97-00981A AC64-00203Q AC64-30899E AC61-11061S AC59-00013C
SV-131G AC97-00954A AC64-00377C - - AC64-30899E AC61-11061S AC59-00013B
SV-132G AC97-00955A AC64-00377D - - AC64-30899E AC61-11061S AC59-00013C
Lebanon SV-630G AC97-00243J AC64-00097U AC64-00072S - AC64-30899E AC61-00060E AC59-00016H
SV-435G AC97-00157S AC64-00399G - AC97-00216J AC64-30899E AC61-11061V AC59-00016F
SV-132G AC97-00955A AC64-00377D - - AC64-30899E AC61-11061S AC59-00013C
Syria SV-630G AC97-00243J AC64-00097U AC64-00072S - AC64-30899E AC61-00060E AC59-00016H
SV-435G AC97-00157S AC64-00399G - AC97-00216J AC64-30899E AC61-11061V AC59-00016F
SV-234G AC97-00946K AC64-00069V - - AC64-30899E AC61-11061V AC59-00017B
Iran SV-1000S(HCII) AC97-00243Q AC64-00403A AC64-00072Y - AC64-30899E AC61-00060E AC59-00016H
SV-450G AC97-01057A AC64-00115F - - AC64-30899E AC61-11061V AC59-00016F
SV-A90G(HCII) AC97-00157T AC64-00399H - AC97-00216J AC64-30899E AC61-11061V AC59-00016F
SV-A70G(HCIV) AC97-00946P AC64-50995A - - AC64-30899E AC61-11061V AC59-00016F
SV-A220G AC97-00621S AC64-00069H - - AC64-30899A AC61-11061S AC59-00013C
Saudi Arabia SV-630G AC97-00243J AC64-00097U AC64-00072S - AC64-30899E AC61-00060E AC59-00016H
SV-450G AC97-01058A AC64-00115G - - AC64-30899E AC61-11061V AC59-00016F
SV-435G AC97-00157S AC64-00399G - AC97-00216J AC64-30899E AC61-11061V AC59-00016F
SV-234G AC97-00946K AC64-00069V - - AC64-30899E AC61-11061V AC59-00017B
SV-132G AC97-00955A AC64-00377D - - AC64-30899E AC61-11061S AC59-00013C
Egypt SV-630G AC97-00243J AC64-00097U AC64-00072S - AC64-30899E AC61-00060E AC59-00016H
SV-435G AC97-00157S AC64-00399G - AC97-00216J AC64-30899E AC61-11061V AC59-00016F
SV-234G AC97-00946K AC64-00069V - - AC64-30899E AC61-11061V AC59-00017B
SV-132G AC97-00955A AC64-00377D - - AC64-30899E AC61-11061S AC59-00013C
Ethopia SV-630G AC97-00243J AC64-00097U AC64-00072S - AC64-30899E AC61-00060E AC59-00016H
SV-435G AC97-00157S AC64-00399G - AC97-00216J AC64-30899E AC61-11061V AC59-00016F
SV-234G AC97-00946K AC64-00069V - - AC64-30899E AC61-11061V AC59-00017B
Algeciras SV-D620K AC97-00243N AC64-52158Y AC64-00072W - AC64-30899E AC61-00060E AC59-00016F
SV-5D AC97-00213U AC64-00069X - - AC64-30899E AC61-11061S AC59-00013B
Tunis SV-D80K AC97-00157Q AC64-00399D - AC97-00216K AC64-30899F AC61-00060G AC59-00016F
SV-D30K AC97-00621P AC64-00069E - AC97-00216H AC64-30899H AC61-00060G AC59-00017B
SV-D10K AC97-00621N AC64-00069N - - AC64-30899H AC61-11061S AC59-00013B
Kenya SV-D10K AC97-00621N AC64-00069N - - AC64-30899H AC61-11061S AC59-00013B
Reunion SV-D620K AC97-00243P AC64-52158Y AC64-00072X - AC64-30899E AC61-00060B AC59-00016F
SV-D80K AC97-00157Q AC64-00399D - AC97-00216K AC64-30899F AC61-00060G AC59-00016F
SV-D35K AC97-00621Q AC64-00069F - - AC64-30899H AC61-00060G AC59-00017B
SV-D10K AC97-00621N AC64-00069N - - AC64-30899H AC61-11061S AC59-00013B
SV-D12K AC97-00158J AC64-00399B - - AC64-30899F AC61-11061S AC59-00013B
Morocco SV-D80K AC97-00157R AC64-00399F - AC97-00216A AC64-30899A AC61-00060G AC59-00016F
SV-D35K AC97-00213W AC64-52169L - - AC64-30899A AC61-00060G AC59-00017B
SV-D12K AC97-00158K AC64-00399C - - AC64-30899A AC61-11061S AC59-00013B
Algeria SV-D620K AC97-00243N AC64-52158Y AC64-00072W - AC64-30899E AC61-00060E AC59-00016F
South Africa SV-626I AC97-00243M AC64-52158X AC64-00072V - AC64-30899E AC61-00060E AC59-00016F
Exploded View and Parts List
Samsung Electronics 3-5
3-2 Mechanical Parts (Top Side)
G001
K250
K248
K110
K502
K350
K330
K182
K140
K490
K530
K240
G532
G420
G450
K546
G510
B410
B440
B444
B446
B448
B452
G527
G520
G480
G680
S.N.A.
S.N.A.
S.N.A.
S.N.A.
S.N.A.
G530
K340
B473
K188
G555
G546
S.N.A. : Service Not Available
S.N.A.
Exploded View and Parts List
3-6 Samsung Electronics
Loc. No Parts No. Description ; Specification Remark
B410 AC31-12016D MOTOR-LOADING ASSY;-,SNHNE,-,B440 AC60-10515A SCREW-MACHINE;-,PH,+,-,M3,L3,ZPC,-,YEL
B444 AC66-20571A GEAR-WORM;-,POM SW-01,0.5,2,-,4.5,X-9
B446 AC61-21005A HOLDER-WORM;-,POM M90-44,-,-,-,X-9
B448 AC66-20573A GEAR-WORM WHEEL;-,POM SW-01,0.6,11,-,6.6
B452 AC66-20575A GEAR-FL CAM;-,POM SW-01,M0.6,Z88,-,PCD58
B473 AC61-60559A SPRING-PINCH DRIVE;-,TS,SUS304,PI0.5,OD4
G001
Refer to table ; page 3-7
ASSY-CYLINDER
G420 AC66-80142A SLIDER-SUPPLY ASSY;-,X-9(TS),-,-,-,X-9
G450 AC66-80141A SLIDER-TAKE UP ASSY;-,X-9(TS),-,-,-,X-9
G480 AC33-00003A HEAD-ACE ASSY;SHINHEUNG;-,-,-,-,X-9
G510 6006-001075 SCREW-ASSY TAPT;WSP,PH,+,M2.6,L5.0,ZPC
G520 AC66-30539A LEVER-#9 GUIDE ASSY;-,X-9(TS),-,-,-,X-9
G527 AC61-60553A SPRING-#9 GUIDE;-,ES,SUS304-WPB,OD3.1,0.
G530 AC33-00002A HEAD-FE;-,HVFHP0038A,-,-,-,X-9
G532 AC60-10519A SCREW-TAP TITE;-,PH,+,-,M2.6,L8,ZPC
G546 AC66-30535A LEVER-FL DOOR;-,POM M90-44,-,-,BLK,X-9
G555 AC59-90403A UNIT-PINCH ASSY;X-9,G680 AC66-30557A LEVER-H/CLEANER ASSY;-,POM+URETHANE,-,- (OPTIONAL)
K110 AC66-10267A REEL-DISK S;-,POM M90-44,-,-,X-9
K140 AC66-10268A REEL-DISK T;-,POM M90-44,-,-,X-9
K182 AC66-30524A LEVER-IDLER;-,POM9044,-,-,-,K188 AC66-20577A GEAR-IDLER;-,PEBAX 7033,-,-,-,-,X-9
K240 AC66-30538A LEVER-TENSION ASSY;-,X-9(TS),-,-,-,X-9
K248 AC61-60554A SPRING-TENSION LEVER;-,ES,SUS304-WPB,OD3
K250 AC63-12029A BAND-BRAKE ASSY;-,X-9(TS),-,-,-,X-9
K330 AC66-30550A LEVER-S.BRAKE ASSY;-,POM+SUS,-,-,-,X-9
K340 AC66-30549A LEVER-T.BRAKE ASSY;-,POM+SUS,-,-,-,X-9
K350 AC61-60564A SPRING-BRAKE;-,TENSION,SWP-A,0.25,3,-,XK490 AC61-21010B HOLDER-CASS ASSY;-,SECC+POM+SUS,-,-,-,XK502 AC61-60561A SPRING-FL.LEVER-LR;-,ES,SUS304 WPB,PI2.7
K530 AC66-30546A LEVER-FL.ARM ASS’Y;-,SECC+POM+SUS,-,-,-,
K546 AC61-50658A GUIDE-CASS. DOOR;-,POM M90-44,-,-,NTR,-,
Exploded View and Parts List
Samsung Electronics 3-7
COUNTRY MODELS G001
Germany SV-6333X AC97-00563A
SV-2333X AC97-00547A
SV-2303X AC97-00547A
Sweden SV-6353X AC97-00563A
Finland SV-6313X AC97-00563A
Norway SV-2303X AC97-00547A
SV-2353X AC97-00547A
Hungary SV-4353G AC97-00549A
SV-4303G AC97-00549A
SV-2303G AC97-00547A
Poland SV-4353G AC97-00549A
SV-4303G AC97-00549A
SV-2303G AC97-00547A
Bulgaria SV-130W AC97-00553A
Australia SV-637B AC97-00563A
SV-630B AC97-00563A
Newzealand SV-630X AC97-00563A
Thailand SV-D600 AC97-00563A
U.A.E. SV-630G AC97-00563A
SV-435G AC97-00558A
SV-234G AC97-00554A
SV-233G AC97-00553A
SV-130G AC97-00554A
SV-131G AC97-00553A
SV-132G AC97-00554A
Lebanon SV-630G AC97-00563A
SV-435G AC97-00558A
SV-132G AC97-00554A
Syria SV-630G AC97-00563A
SV-435G AC97-00558A
SV-234G AC97-00554A
Iran SV-1000S(HCII) AC97-00563A
SV-450G AC97-00558A
SV-A90G(HCII) AC97-00558A
SV-A70G(HCIV) AC97-00554A
SV-A220G AC97-00554A
Saudi Arabia SV-630G AC97-00563A
SV-450G AC97-00558A
SV-435G AC97-00558A
SV-234G AC97-00554A
SV-132G AC97-00554A
Egypt SV-630G AC97-00563A
SV-435G AC97-00558A
SV-234G AC97-00554A
SV-132G AC97-00554A
Ethopia SV-630G AC97-00563A
SV-435G AC97-00558A
SV-234G AC97-00554A
Algeciras SV-D620K AC97-00567A
SV-5D AC97-00553A
Tunis SV-D80K AC97-00565A
SV-D30K AC97-00553A
SV-D10K AC97-00553A
Kenya SV-D10K AC97-00553A
Reunion SV-D620K AC97-00567A
SV-D80K AC97-00565A
SV-D35K AC97-00553A
SV-D10K AC97-00553A
SV-D12K AC97-00553A
Morocco SV-D80K AC97-00565A
SV-D35K AC97-00553A
SV-D12K AC97-00553A
Algeria SV-D620K AC97-00567A
South Africa SV-626I AC97-00563A
Loading...