Samsung SU2920, SU2930, SU2921, SC-U2911, SU2912 User Manual

...

Vacuum

Cleaner

SU-2900 Series

FOR HOUSEHOLD USE ONLY

Operating

Instructions

IMPORTANTSAFETY INSTRUCTIONS............................1

ASSEMBLING PARTS........................................................2

ASSEMBLED VACUUM CLEANER PARTS ............................2

ATTACHING THE HANDLE................................................2

ATTACHING THE HOSE AND TOOLS...............................2

OPERATION ............................................................... .......3

MAINTENANCE...................................................................4

TROUBLESHOOTING ........................................................6

Read these instructions before operating the vacuum cleaner

•The design and specification may be different depending on the models.

IMPORTANT SAFETY INSTRUCTIONS

Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following:

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING:

• Do not leave vacuum cleaner unattended when it is plugged in.

• Unplug from outlet when not in use and before servicing.

• Do not use outdoors or on wet surfaces.

• Do not allow children to operate vacuum cleaner or use as a toy.

• Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• Do not use with damaged cord or plug.

• If vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors or dropped in water, take it to a service center.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull the cord around sharp edges or corners. Keep cord away from heated surface.

• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

• Do not handle vacuum cleaner or plug with wet hands.

• Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair and anything that may reduce air flow.

• Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

• Do not use without dirt cup or filters in place. Empty cup and clean filter frequently when picking up very fine materials such as powder.

• Turn off all controls before unplugging vacuum cleaner.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible materials such as gasoline or fine wood standings or use in areas where they may be present.

• Store your vacuum cleaner indoors in a cool, dry area.

• Avoid picking up hard, sharp objects with the cleaner, they may damage the cleaner.

• Always turn off this appliance before connecting or disconnecting the hose, removing the bottom plate for maintenance.

• Use only on dry, indoor surfaces, never change the plug in any way.

• Do not modify the polarized plug to fit a non-polarized outlet or extension cord.

• Do not touch the brush roller when it is rotating.

• Keep suction away from your face when using nozzles and pipe.

• Do not pull the power cord around sharp corners and do not allow it to become trapped.

• Unplug before connecting turbine nozzle.(only using turbine-brush model)

To reduce the risk of fire, electric shock, or injury:

SAVE THESE INSTRUCTIONS FOR FUTURE USE.

Assembling Parts

Assembled Vacuum Cleaner Parts

1-1

Front Back

The assembled cleaner will look like the illustration to the left.

1.Handle

2.Power switch

3.Quick release cord hook

4.Post-Motor Filter

5.Crevice tool

6.Handle release

7.Carrying handle

8.Hose

9.Extension wand

10.Combination tool

11.Cyclone-Lever

12.Dirt Cup

13.Filter Cup

14.Upper Tank

15.Louvers

16.Hose Wand Base

17.Height Adjustment Dial

18.Hose Clip

WARNING!

OPERATE THE VACUUM CLEANER ONLYAT THE VOLTAGE SPECIFIED ON THE NAMEPLATE.

Step 1. Attaching the Handle

1-2 1-3

Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body.

Insert the screw provided into the existing hole. Tighten the screw securely with a screwdriver. Before securing the handle, please check that the handle is fitted to the vacuum body and make sure there’s no gap.

Step 1. Attaching the Handle

1-4 1-5

Slide the end of the hose wand with tabs into the Hose Wand Base.

Slide the extension wand and the crevice tool together into the storage clip.

+ 5 hidden pages