SAMSUNG STP131 User Manual
STP131 Series
Operator's Manual
DATE: July. 2001
MANUAL REVISION 2.0
Warning - U.S
This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interface when the equipment is
operated in a commercial environment. This equipment generates uses, and can
radiate radio frequency energy and, if not installed and uses in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Notice - Canada
This Apparatus complies with class "A" limits for radio interference as specified in
the Canadian department of communications radio interference regulations.
Get appareil est conforme aux normes class "A" d'interference radio tel que
specifier par ministre canadien des communications dans les reglements
d'interference radio.
Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer "OFF", before you connect or remove the cables on the rear side,
in order to guard the printer against the static electricity. If the printer is damaged
by the static electricity, you should turn the printer "OFF".
TEL : 82-31-210-5620
FAX
: 82-31-210-5589
Introduction
The STP131 Series Roll Printer are designed for use with electronic instruments such
as system ECR, POS, banking equipment peripheral equipment, etc
The main features of the printer are as follows:
1. High speed printing : 17.3(1/6" Feed) lines per second.
2. Low noise thermal printing.
3. RS-232(
4. The data buffer allows the unit to receive print data even during printing.
5. Peripheral units drive circuit enables control of external devices such as
cash drawer.
6. Characters can be scaled up to 64 times compared to it's original size.
7. Bar code printing is possible by using a bar code command.
8. Different print densities can be selected by DIP switches.
Please be sure to read the instruction in this manual carefully before using your
STP131 Series.
new
STP131 Series
NOTE : The socket-outlet shall be near the equipment and it shall
be easy accessible.
), Parallel(
STP131 Series
)
.
Table of Contents
Chapter 1. Setting Up the Printer
1-1. Unpacking
Chapter 1. Setting up the printer
1-1. Unpacking
1-2. Connecting the cables
1-3. Connecting the computer
1-4. Connecting the drawer
1-5. Connecting the power supply
1-6. Installing or replacing the paper roll
1-7. Adjustments and settings
1-8. Using the Printer
Chapter 2. Hexadecimal dumping
Chapter 3. The self test
Chapter 4. Code table
Chapter 5. Control commands
10
10
12
13
14
22
4
4
5
6
6
7
8
Your printer box should include these items. If any items are damaged or missing,
please contact your dealer for assistance.
Roll paper
STP131 Series
AC Adapter
Interface cable (option)
Operator's Manual
Power cable
Appendix
A. Connectors
Interface connector
Drawer connector
B. Notes
C. Specification
44
44
44
46
46
47
25 pin 25 pin 25 pin9 pin
Parallel cable
3
4
Serial cable
Loading...