Samsung STB-496PPV-N Specsheet

CAMERA

SAMSUNG DIGITAL CCTV SYSTEMS_53

CAMERA ACCESSORIES

Dimensions

Unit : mm (inch)

Mode

Operating Temprature

Operating Humidity

Housing

Materials Ring

Dome

Antivibration / Waterproof

Dimensions

Weight

STH-330POV STH-330PIV STH-320PO STH-330PEV STB-270PWV STB-496PPV

(Outdoor Housing) (Indoor Housing) (Outdoor Housing)

(Embedded Housing) (Wall Mounts)

(Pendant Mounts)

88 (3.46")

242 (9.53")

8 (0.31")

217 (8.54")

284.5 (11.2")

77.8 (3.06") 186.1 (7.33")

243 (9.57")

281 (11.06")

8 (0.31")

-20°C ~ 50°C -10°C ~ 50°C -20°C ~ 50°C -10°C ~ 50°C -20°C ~ 50°C -20°C ~ 50°C

0 to 90% RH

0 to 90% RH 0 to 90% RH 0 to 90% RH

ALDC 12

ALDC 10 EGI 1.2T ALDC 12 ALDC 12

ALDC 12

ALDC 12 ABS EGI 1.2T SPPS 32A / SCH 40

Poly Carbonate

Poly Carbonate - - SPCC

IP 67

IP 67 - - -

Ø242(W) x 284.5(H)mm Ø243(W) x 281(H)mm Ø235(W) x 188.5(H)mm

270(W) x 175(H) x 140(D)mm

150(W) x 496(H)mm

3.02Kg (6.66 lb) 1.55Kg (3.41 lb) 890g (1.96 lb) 1.2Kg (2.65 lb) 1.8Kg (3.97 lb)

(non-condensing)

Ø9.53”(W) x 11.2”(H) Ø9.57”(W) x 11.06”(H) Ø9.25”(W) x 7.42”(H)

10.63”(W) x 6.89”(H) x 5.51”(D)

5.91”(W) x 19.53”(H)

(non-condensing) (non-condensing) (non-condensing)

Housing & Mounts for PTZ Dome Camera

(SPD-3750/3300/3000/2300/SNP-3300)

STH-330PIV/POV STH-320PO STH-330PEV

188.5 (7.42")

235 (9.25")

175 (6.89")

207 (8.15")

187 (7.36")

270 (10.63")

20 (0.79")

496 (19.53")

430 (16.93")66 (2.6")

42 (1.65")

150 (5.91")

STB-270PWV STB-496PPV

SAMSUNG DIGITAL CCTV SYSTEMS_52

1/3” Day & Night, IR LED Dome Camera with Built-in Varifocal Lens

SIR-4250S

Mode

Power Source

Power Consumption

Image Pick-up Device

Total Pixels

Effective Pixels

Scanning System

Synchronization

Scanning Frequency

Horizontal Resolution

Video Output

Lens

S / N Ratio (Y signal)

LED On

Min. Illumination

LED Off

IR LED

IR Distance

Back Light Compensation

Day & Night

Gain Control

White Balance

Electronic Shutter Speed

Sens-up

OSD

SSNR

Motion Detection

Privacy Function

Mirror

Sharpness

Iris Control

Protocols

Communication

Operating Temperature

Operating Humidity

Dimensions

Weight

SIR-4250SN SIR-4250SP

12V DC (±10%)

Max. 3.6W (LED On)

1/3” Super HAD CCD

811(H) x 508(V) 795(H) x 596(V)

768(H) x 494(V)

752(H) x 582(V)

2 : 1 Interlace

525 Lines / 60 Fields / 30 Frames 625 Lines / 50 Fields / 25 Frames

Internal

Horizontal : 15,734KHz / Vertical : 59.94Hz

Horizontal : 15,625KHz / Vertical : 50Hz

Color : 520TV lines (Min.) / B/W : 570TV lines (Min.)

1.0Vp-p / 75Ω (Video 0.714Vp-p, Sync 0.286Vp-p) 1.0Vp-p / 75Ω (Video 0.7Vp-p, Sync 0.3Vp-p)

2.5X Auto iris varifocal lens, 3.8 ~ 9.5mm (F1.2)

50dB (AGC off, Weight on)

0 Lux@F1.2 (B/W mode, 50 IRE)

0.7Lux@F1.2 (Normal color mode, 50 IRE)

0.005Lux@F1.2 (Color sens-up mode, 50 IRE)

10ea (Black)

16m (52.5 ft)

Low / Middle / High / Off

Color / B/W / Auto (ICR filter change)

Normal / High / Off

ATW / AWC / Manual (1,800°K

~ 10,500°K)

Fixed (1/60 / Flickerless) Fixed (1/50 / Flickerless)

On / Off (Selectable limit ~ 128X)

Built-in

Low / Middle / High / Off

On / Off selectable (Output via terminal)

On / Off selectable (4 Programmable zones)

On / Off selectable

On / Off selectable (Level adjustable)

DC fixed

PELCO-D

RS-485

-10°C

~ +50°C

30% ~ 80% RH

Ø145.3(W) x 109.5(H)mm / Ø5.72”(W) x 4.31”(H)

985g (2.17 lb)

Technical Specifications

Dimensions

Unit : mm (inch)

Name of Control Section

5 46

9 10

11 12 13

Rotate Base : Control rotating angle of camera Safety ring Dome Cover Pan base Holding Screws (Color : Silver) : Fix rotated position Pan Base : Control panning angle of camera Video output terminal RS-485 Control terminal Power input terminal Focus Handle : To provide for accurate focusing of an object

within thelens field of view

Zoom Handle : To adjust zoom magnification by turning Rotate Base Holding Screw : Fix rotated position Sub monitoring cable : When install camera, connect with

monitor for image confirmation and uses. A terminal can be connected to an LCD monitor, allowing the operator to easilyadjust the camera angle within the monitoringrange during its installation

Function Setup Button

• SET Button : Used for the menu display. Confirm the status of theselected function

• Left and Right Button : Used when changing item values, by moving thecursor to the left or right on the menu screen

• Up and Down Button : Used when changing item values, by moving thecursor to the up or down on the menu screen

Pan base Holding Screws (Color : Silver) : Fix panned position

55.9 (2.2")

109.5 (4.31")

Ø145.3 (5.72")