3D Active Glasses
SSG-3570CR
User’s Guide
Features
Samsung's SSG-3570CR 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the 2.4GHz RF band.
This product can be used only with Samsung D, E, and F series 3D TVs released in 2011 to 2013 or with 3D TVs that have any of the logos below. Other wireless devices are not compatible with this product.
or
The "Full HD 3D Glasses™" Logo signifies compatibility between display products and
3D Glasses that are compliant with the "Full HD 3D Glasses™" format and does not indicate the picture quality of the 3D images visible using the glasses, which depends on the quality of the display products.
Parts |
Components |
Nose pad |
3D Active Glasses |
|
|
|
User Guide |
|
Cleaning cloth |
Liquid-crystal shutter |
Micro USB Cable |
|
|
pairing button |
Nose pad |
To wear the 3D glasses over eyeglasses, detach the nose pad from the 3D glasses.Refer to the last chapter in this user guide for details about how to attach or detach
the nose pad.
[NA]SSG-3570CR-00L17.indb 1
Pairing 3D Active Glasses |
English |
|
What is Pairing? Pairing is a process that prepares devices to exchange data so that, in |
||
|
||
operation, the devices can transmit and exchange data instantly. |
|
|
Operating range |
|
|
Recommended pairing distance |
|
Pairing: Press the pairing button on the 3D glasses for more than 1 seconds. Pairing will start.
Turning the glasses on and off: Put on the 3D glasses. The glasses will automatically power on and the green LED will be lit for 3 seconds. To power off the glasses, take off the glasses. Several minutes later, the glasses will automatically power off and the red LED will be lit for 3 seconds. (Make sure that 3D is activated on the TV before using the 3D glasses.)
2~6m
Recommended viewing distance
Recommended |
2~6m |
|
viewing distance |
||
|
||
|
|
|
Recommended |
50 cm |
|
pairing distance |
||
|
||
|
|
Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (This feature only applies to Samsung F series 3D TVs and 3D glasses that have been launched since 2013.)
The working distance depends on obstacles (a person, metal, walls, etc.) or electromagnetic waves.
Note that if you take off the 3D glasses while viewing 3D video and the 3D mode remains enabled on your TV, it will take 5 minutes for the 3D glasses to power off.
If the glasses do not operate immediately when you put them on while the TV is in 3D mode, put the glasses on again.
This product is rechargeable. It may not operate due to the dead battery when you attempt to use it for the first time. In this case, charge the battery.
English-1
2013-01-02 9:15:09
Pairing for the first time
1.Turn on the TV and wait until the TV is fully on.
2.Press the pairing button on the 3D glasses shortly. The 3D glasses will power on and pairing will start.
3.The message “3D glasses are connected to TV.” will be displayed on the TV screen when the pairing is successfully completed.
4.Enjoy 3D video after configuring the 3D function settings on the TV.
After the first pairing, putting on the 3D glasses will automatically power on the glasses. To power off, take off the glasses.
If the pairing fails, the 3D glasses will power off.
If the first attempt to pair fails, turn the TV off and on again, and then go to Step 2.The LED will blink green and red alternately for 1 seconds if pairing is in progress.
How to pair again: Press the pairing button on the 3D glasses for more than 1 seconds.
<Pairing is needed again in the following occasions>
–– Pairing may be needed again after you have had your 3D TV repaired.
–– If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F series released in 2011 through 2013.
English-2
Charging the Battery
If the red LED blinks every 2 seconds, charge the battery as shown below. The orange LED will blink every second when battery charging is in progress. The green LED will blink every 2 seconds when the charging is finished. (It takes about 30 minutes to fully charge the battery that is dead; however, the time required to charge it to full capacity may vary depending on the battery level and the voltage of the supplied power.)
|
USB1 |
SAMSUNG TV |
USB PORT |
USB |
PC |
|
|
|
|
Micro USB Cable |
Note Book |
Viewing guidelines
•When viewing 3D video under a fluorescent lamp (50Hz – 60Hz) or 3-wavelength lamp, you may notice a small amount of screen flickering.If so, dim the light or turn the lamp off.
•Switching the input mode while watching a 3D movie may disable the 3D function on the TV. As a result, the 3D glasses may not function and the movie may not be displayed properly.
•Ensure you are within the working range when you view a 3D video.
If you move the 3D glasses outside of their working range, the signal from the TV will be disconnected, and the 3D glasses will be automatically turned off. When this happens, the red LED will turn on for 3 seconds.
[NA]SSG-3570CR-00L17.indb 2 |
|
|
2013-01-02 9:15:09 |
|
|
||
|
|
|
|