Samsung SSC-5000 User Manual

System Keyboard

SSC-5000

user manual

imagine the possibilities

Thanks you for purchasing this Samsung product.
To receive a more complete service, please
register your product at

www.samsung.com/global/register

general facts

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

This symbol indicates that dangerous
voltage consisting a risk of electric shock
is present within this unit.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

•

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation

•

instructions.
If this power supply is used at 240V ac, a suitable plug adapter should be used.

•

Be sure to use only the standard adapter that is specified in the specification sheet.Using any other adapter

1.
could cause fire, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or

2.
damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause

3.

generation or fire.

4.

Securely plug the power cord into the power receptacle. Insecure connection may cause fire.

5.

When installing the camera, fasten it securely and firmly. A falling camera may cause personal injury.

6.

Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or containers filled with water on
top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.

7.

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.

8.

If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately
disconnect the power source and contact the service center. Continued use in such a condition may cause fire
or electric shock.

9.

If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this
product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted
repair.)

10.

When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric
shock.

CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL

This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.

abnormal heat

CAUTION

1.

Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive
vibration or magnetic interference.

2.

Do not install in a location subject to high temperature (over 122°F), low temperature (below 14°F), or high
humidity. Doing so may cause fire or electric shock.

3.

If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

4.

Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or
damage to the product.

5.

Keep out of direct sunlight and heat radiation sources. It may cause fire.

6.

Install it in a place with good ventilation.

7.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD
image sensor.

8.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.

9.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

2_ general facts

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15



M

J

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

1.
Keep these instructions.

2.
Heed all warnings.

3.
Follow all instructions.

4.
Do not use this apparatus near water.

5.
Clean only with dry cloth.

6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7.
Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)

8.
that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

9.
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

10.
the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

11.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

12.
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

13.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

14.
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or been
dropped.

of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.



FCC regulations state that any unauthorized changes or modifications to this equipment may void the
user’s authority to operate it.

IC Compliance Notice



This Class A digital apparatus meets all requirements of the Canadian interference-Causing Equipment Regulations
of ICES-003.

M GENERAL FACTS

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or
distributed ONLY in California USA. “Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/
hazardouswaste/perchlorate.”

English _3

general facts

CONTENTS

GENERAL FACTS

2

INSTALLATION

8

CONNECTING WITH OTHER

EQUIPMENT

10

INSTRUCTIONS

14

4 Contents
5 Introduction
5 Checking Contents & Accessories
6 Name and function of each part

8 Installation Environment Setup
8 Cautions for Installation
9 Adjusting System Keyboard Angle
9 Fixing Power Cord

10 Connecting RS-485 Device
12 Connecting to PC using USB port
12 Connecting Other System Keyboard
13 Basic System Diagram of SSC-5000

14 Log-in
15 Camera control
19 DVR control

MENU SETUP

22

OTHERS

29

22 Main Menu
22 Keyboard Setup
22 RS-485 Communication Setup
23 Change Password
24 Check Password
24 Register New Operator
25 Camera Data Download
26 Camera Data Upload
27 System Information and Setup
28 Operator Level

29 Product Specification
30 Troubleshooting (FAQ)

4_ general facts

English _5

M GENERAL FACTS

INTRODUCTION

SSC-5000 system keyboard is a controller that controls Cameras, DVR, and other devices by using RS-485.
An user-friendly on-screen menu, touch screen, and joystick applied, it is easy to operate.

Features

Long-distance remote control

•

Through RS-485 communication, remote control is possible up to 1.2 kilometers. (Based on the one
System Keyboard)

•

Integrated System Control
A System Keyboard can control Camera (Receiver Unit) and DVR.

•

You can connect 2 or more System Keyboards together.
Maximum 32 keyboards can be connected simultaneously and the system can be controlled from different

places.

•

Easy to operate
There is an LCD showing the operating status of the System Keyboard, Touch Screen that helps users to

choose the menu easily, and a Joystick.

Controllable products List

W

Camera

•

DVR

•

SHR-4081, SHR-4160,
SHR-504Xseries, 508Xseries, 516Xseries, SHR-2XXXseries,
PC Based DVR
(SPR-7XXXseries, SPR-9XXXseries)

CHECKING CONTENTS & ACCESSORIES

On buying a product, unwrap it first and put it down on a plane or where you want to use it.
Then, you shall check if the followings are contained in the box.

Keyboard

System

Main Body User’s Manual

general facts

NAME AND FUNCTION OF EACH PART

Front side

Name Function

LCD Display

Camera movement button

ALARM RESET button

Camera lens button

Joystick controller (UP/
DOWN/LEFT/DOWN/ZOOM)

Device select button
(MON/CAM/VMS/DVR)

DVR control button
(SEQUENCE, MODE)

Number (0~9),
ENTER, CLEAR button

It shows the operating status of the system keyboard..

PRESET, PATTERN, SCAN, AUTO PAN

Use this to set on or off the alarm.

-

IRIS control (IRIS CLOSE/OPEN)

-

FOCUS control (FOCUS NEAR/FAR)

-

ZOOM control (ZOOM TELE/WIDE)

The Pan/Tilt connected with Samsung Dome Camera or Receiver Unit is moved to UP/
DOWN/LEFT/RIGHT. Press the button on the top of Joystick to control the Auto Focus. And
use for the zoom control by turning to the clockwise or counterclockwise. The function of
UP/DOWN/LEFT/RIGHT keys is controlled in the menu screen of the connected controller.
Press the button of the top to execute ENTER motion.

This key is to select Camera, Monitor, DVR or others.

SEQUENCE : Executes the SEQUENCE function of DVR.

-

MODE : Executes the partition screen selection function of DVR.

-

This key is to select Camera, Monitor, DVR, Preset, Pattern Number, or others.

MENU button

Jog shuttle

DVR Play button

AUX 1, 2, 3, 4 button

6_ general facts

This key is to go into the menu mode for the setup of various devices.

JOG : Is in use for Forward / Reverse Frame search in the playback mode of DVR.

-

Shuttle : Executes the Play / Reverse Play / FF / REW functions in the playback mode of

-

DVR.

PLAY/PAUSE, STOP, FAST FORWARD, REWIND, RECORD

Controls the AUX output of the receiver unit.

English _7

M GENERAL FACTS

Back side

Name Function

USB Port

Composite Video IN/OUT

RS-485 (Port1, 2)

DC12V IN

This is a software uploading port of the System Keyboard.

This is an AV In / Out port.

For RS-485 communication, it will be connected to the RS-485 terminals of other System
Keyboards or controlling devices such as cameras, and DVR.

You can specify different protocols for Port 1 and Port 2.

M

DC 12V power input terminal

installation

INSTALLATION ENVIRONMENT SETUP

The following information is prepared for safe installation of the unit.

This unit can be placed on a flat table or installed in the rack.

•

It should not be used vertically or skew, but horizontally.
The location of the unit and the composition of wiring are very important in properly operating the system.

•

When equipment is placed too close or if ventilation is not properly done, system may not work properly, and
maintenance of the system may be difficult.

•

In order to prevent system failure and to reduce system shut-down by outside environmental factors, air
circulation in the system operating room, and the cover of the unit must be fixed.

•

Do not open the cover voluntarily because high voltage within the unit may cause electric shock.

PHYSICAL & ENVIRONMENTAL

-

Operating Temperature : 0°C ~ 40°C

-

Maintenance Temperature : -20°C~60°C

-

Operating Humidity : 20%~85% RH

-

Maintenance Humidity : 20%~90%RH

-

Power Supply : DC 12V, 1A (

-

Power Consumption : 4W

)

J

grounded. Heating devices such as hair dryer, iron, refrigerator should not be used together.
For safe power supply, AVR (Automatic Voltage Regulator) is recommended. The connector linked to this equipment
can affect EMI, so it is recommended to coil the CORE-FERRITE for use.

When system is operated, input voltage range must be within 10% of nominal voltage, and power consent should be



CAUTIONS FOR INSTALLATION

Be sure to turn the unit off before installing.

­Avoid shock or vibration since they may cause unit malfunction.

­Keep away from magnets, radio or TV to avoid magnetic damage.

­During or after installing the unit, be sure to maintain the area around the unit clean.

­Place the unit on a flat surface and maintain temperature properly.

­Allow 15 cm of clearance between the rear panel and the wall.

Be careful not to drop any conductive materials into the hole for ventilation.

­When replacing built-in fuse, be sure to turn the power off, and unplug the unit.

-

-

Avoid locating the unit where direct sunlight will fall, and maintain it cool.
Keep tools and equipment away from people so that they would not be hurt.

-

If ignoring smoke or smell while using the unit, fire or electric shock may occur. In this case, turn the power switch off
immediately, and consult professionals in the closest service center.

-

Be sure to check dangers, which may occur due to damped floor, ungrounded power extension cable, worn
power cord or lack of safety grounding.



J

8_ installation

When cleaning this unit, be sure to wipe with a dried cloth. If the unit is heavily contaminated, wipe it with a soft
cloth dampened with a mild detergent solution, then wipe dry with a soft clean cloth.
Do not use chemicals such as alcohol, benzene, or thinner because a chemical reaction could result permanent
damaging of the cabinet surface.

ADJUSTING SYSTEM KEYBOARD ANGLE

You may adjust the angle of the product as shown below.

FIXING POWER CORD

Hang the power cord as shown in the following figure to prevent it from being deviated when you connect it with the
main body.

M INSTALLATION

English _9

connecting with other equipment

You can use the SSC-5000 System Keyboard with a camera, DVR, and the other equipments.
This chapter describes how to connect each equipment.

CONNECTING RS-485 DEVICE

- Connect RS-485 Device through the port in the back of SSC-5000.

- You are able to install and control the camera and DVR supporting RS-485 communication.

- Either Half Duplex or Full Duplex method is applicable for connection.

M

For the Half Duplex method, use TX +,-.

M

To connect RS-485, be careful not to be confused between + and -.
Also, you shall check if the RS-485 device can support SSC-5000.

M

Please refer to “RS-485 Communication Setup” of “Menu Setup” for RS-485 communication setup. (see page 22)

Connecting the SAMSUNG Dome Camera

Connect with SSC-5000 by using the RS-485 port on the back of Dome Camera

In case of connecting with Half Duplex

W

- Connect the RX (+) of Dome Camera RS-485 port with the
TX(+) of SSC-5000.

- Connect the RX (-) of Dome Camera RS-485 port with the
TX(-) of SSC-5000.

In case of connecting with Full Duplex

W

- Connect the RX (+) of Dome Camera RS-485 port with the
TX (+) of SSC-5000.

- Connect the RX(-) of Dome Camera RS-485 port with the
TX (-) of SSC-5000.

- Connect the TX (+) of Dome Camera RS-485 port with the RX (+)
of SSC-5000.

- Connect the TX (-) of Dome Camera RS-485 port with the RX (-)
of SSC-5000.

TXD+
TXD­RXD+
RXD-

10_ Connecting with Other Equipment

Connecting SHR-4081, SHR-4160, SHR-508X Series, SHR-516X Series,
SHR-208X and SHR-216X Series DVRs

Connect to SSC-5000 through the RS-485 port on the rear of the DVR.

Connecting as Half Duplex

W

- Connect TX (+) of the RS-485 port of the DVR to TX (+) of
SSC-5000.

-

Connect TX (-) of the RS-485 port of the DVR to TX (-) of SSC-5000.

Connecting as Full Duplex

W

- Connect RX (+) of RS-485 port of the DVR to RX (+) of SSC-5000.

- Connect RX (-) of RS-485 port of the DVR to RX (-) of SSC-5000.

- Connect TX (+) of RS-485 port of the DVR to TX (+) of SSC-5000.

- Connect TX (-) of RS-485 port of the DVR to TX (-) of SSC-5000.

Connecting SHR-5040 & SHR-5042 DVR

Connect to SSC-5000 through the RS-485 port on the rear of SHR-5040 /
SHR-5042DVR.

Connecting as Half Duplex

W

- Connect TX (+) of RS-485 port of SHR-5040 / SHR-5042 DVR to TX (+) of
SSC-5000.

- Connect TX (-) of RS-485 port of SHR-5040 / SHR-5042 DVR to TX (-) of
SSC-5000.

M

CONNECTING WITH OTHER EQUIPMENT

Connecting SHR-204X Series DVR

Connect to SSC-5000 through the RS-485 port on the rear of SHR-204X DVR.

Connecting as Half Duplex

W

- Connect TX (+) of RS-485 port of SHR-204X Series DVR to TX (+)
of SSC-5000.

- Connect TX (-) of RS-485 port of SHR-204X Series DVR to TX (-)
of SSC-5000.

Connecting as Full Duplex

W

- Connect RX (+) of RS-485 port of SHR-204X Series DVR to RX (+)
of SSC-5000.

- Connect RX (-) of RS-485 port of SHR-204X Series DVR to RX (-)
of SSC-5000.

- Connect TX (+) of RS-485 port of SHR-204X Series DVR to TX (+) of SSC-5000.

- Connect TX (-) of RS-485 port of SHR-204X Series DVR to TX (-) of SSC-5000.

English _11

connecting with other equipment

Connecting PC Based DVR

- Connect SSC-5000 through the RS-485 port in the back
of PC Based DVR.

- Connect SIGNAL (+) in the RS-485 port of PC Based DVR
with TX (+) of SSC-5000.

- Connect SIGNAL (-) in the RS-485 port of PC Based DVR
with TX (-) of SSC-5000.

<SPR-9XXX Series>

<SPR-7XXX Series>

CONNECTING TO PC USING USB PORT

You can use the provided USB cable to connect to the PC with uploading software for updating software of the
System Keyboard.

CONNECTING OTHER SYSTEM KEYBOARD

※ It is possible to connect and use max. 32 keyboards simultaneously.
※ Refer to the “ADDRESS SET” part in “RS-485 Communication Setup” of “Menu Setup” for the setting of keyboard

communication.

※ Do not use together with the SSC-2000/SSC-1000 because it is different with the SSC-2000/SSC-1000 in

communication method.

In case of connecting with Half Duplex

W

- Connect the TX (+) of SSC-5000 port with the
TX(+) of another SSC-5000.

- Connect the TX (-) of SSC-5000 port with the TX(-)
of another SSC-5000.

(see page 22)

In case of connecting with Full Duplex

W

- Connect the TX (+) of SSC-5000 with the TX (+) of
another SSC-5000.

- Connect the TX (-) of SSC-5000 with the TX (-) of
another SSC-5000.

- Connect the RX (+) of SSC-5000 with the RX (+) of
another SSC-5000.

- Connect the RX (-) of SSC-5000 with the RX (-) of
another SSC-5000.

12_ Connecting with Other Equipment

English _13

M

CONNECTING WITH OTHER EQUIPMENT

BASIC SYSTEM DIAGRAM OF SSC-5000

One Keyboard to One Device

1.

Digital Video

Recorder

One Keyboard to Multiple Devices

2.

(“Daisy-Chain” Type Wiring)

Multiple Keyboards to Multiple Devices

3.

Digital Video

Recorder

Digital Video

Recorder

(“Daisy-Chain”Type Wiring)

Digital Video

Recorder

M

Do not use together with the SSC-2000/SSC-1000 because it is different with the SSC-2000/SSC-1000 in communication method.

Digital Video

Recorder

In case of using the keyboard connected SSC-931T Version 1.4, make sure the address of connected keyboards differ from each other.

instructions

LOG-IN

Turn on the power of all the components of the system.

1.

When the power is applied by connecting the power adapter at the

2.

back of system keyboard, the following indication is displayed on the
LCD screen.

3.

Using the keypad of the touch screen or the number key of the
keyboard, enter the registered Operator number (1~32) and press
<Enter>.

The default Operator No. is 1.
Refer to “MENU setup”, “REGISTER NEW OPERATOR” for the

registration of the operator number.

If an unregistered operator number is entered, a message of “Invalid Operator!” will

M

appear on the screen and the log-in process will return to the starting point
automatically.

(see page 24)

Login

Operator No. Password

Login

Error

No.

Invalid Operator!

Login

Error

No.

Clear

Enter

Clear

Enter

Using the number keys, enter the registered Password (6-digit fi gure)

4.

and press <Enter>.

The default Password is 4321. Refer to “MENU setup”, “REGISTER NEW

M

OPERATOR” for the registration of the password.

M

If an unregistered password is entered, a message of “Invalid Password!” will appear
on the screen and the log-in process will return to the starting point automatically.

When you have logged in successfully, the System Keyboard will enter

5.

(see page 24)

CAM

002

MON

002002

the following camera control mode and display “Normal Mode” or
“Video Mode” as in the right fi gure.
To change the display mode, see “Display Mode” in “System
Information & Setup”.

Simply tap the screen if you want to switch from the current mode to other mode.

M
M

If the key board is not operated for three minutes, the graphic panel is changed to
the sleep mode and the screen is not displayed. (Samsung Logo display)

(see page 27)

CAM

002

MON

002002

Press the touch panel/key or move the joystick/jog shuttle, and then the screen
before the sleep mode is displayed again.

If you want to log out, press and hold both [PRESET] and [ALARM

6.

RESET] buttons simultaneously for more than 2 seconds to display the Login dialog.

Invalid Password!

Clear

Enter

14_ instructions

CAMERA CONTROL

002

Selecting a camera

W

Press “CAM” ( ) key. The camera display part of the screen will

1.
be as follows.

Enter the camera number (0~255) you want by using the number key

2.
and press [ENTER] button.

Selecting a monitor

W

This function is to choose a monitor displaying the image of the camera.

Press the [MON] button.

1.
Enter the monitor number(0~255) that shows the image of the chosen camera and press <Enter>.

2.

PAN/TILT control

W

Move the joystick of the keyboard to regulate PAN/TILT of the camera.
The speed of the camera movement gets faster when the joystick moves farther from the center.

ZOOM movement

W

Turn the joystick of the keyboard in a clockwise direction or press the [ZOOM TELE] button to regulate the
ZOOM IN movement.

Turn the joystick of the keyboard in a counterclockwise direction or press the [ZOOM WIDE] button to
regulate the ZOOM OUT movement.

CAM

002

MON

002

M INSTRUCTIONS

FOCUS movement

W

Press the [FOCUS FAR] or [FOCUS NEAR] button.

IRIS movement

W

Press the [IRIS OPEN] or [IRIS CLOSE] button.

AUTO PAN movement

W

Press the [AUTO PAN] button to move between two points in the camera menu repeatedly.
“AUTO PAN” will appear on the screen. Press the [AUTO PAN] button again to release the auto pan mode.

On models released later than the SCC-C6405, press the [AUTO PAN] button and enter the AUTO PAN number (1~4), then press

M

the [ENTER] button to execute the AUTO PAN feature.

SCAN movement

W

This function is to move between the preset positions that were set by the camera's scan mode.
Press [SCAN] button to execute the scan movement and you will see “SCAN” message during the scan

movement. Press the [SCAN] button again to release the scan mode.

On models released later than the SCC-C6405, press the [SCAN] button, and enter the SCAN number (1~4), then press the

M

[ENTER] button to execute the SCAN feature.

PATTERN movement

W

This function is to view the camera movement for 30 seconds designated by the user on the pattern mode of
the camera menu.
Press the [PATTERN] button on the keyboard, enter the pattern number(1~3) you want, and press [ENTER]
button to execute PATTERN movement.
“PATTERN 1” will appear on the screen.

On models later than the ALARM VER 1.100, SCC-C6405, movements caught by the camera for 2 minutes will be stored in the

M

PATTERN feature (1~3). If you are transferring data from and to the camera with SSC-5000, please reset before use since the
PATTERN may differ from the settings.

M

If there is any of MANUAL (PAN, TILT, ZOOM, FOCUS) input during auto execution (SCAN, AUTO PAN, PATTERN), the system will stop
the AUTO movement and execute the MANUAL movement.

English _15

instructions

001

000

001

000

1

000

001

000

001

000

001

000

PRESET movement

W

Press the [PRESET] button on the keyboard to start PRESET POSITION
movement.

The screen will appear as shown in the right fi gure.

PRESET position movement

Enter the preset number you want to operate.

1.

Press [ENTER] button.

2.

PRESET programming

This function is to set the camera screen the user wants to call and
monitor whenever he/she wants to. Maximum 128 screens can be preset.
(0~127)

Move the camera to the position you want by using a joystick and camera

1.

lens key.
Press <Save>.

2.

When a window appears as shown in the right fi gure, enter the preset

3.

number you want to save and press <Enter>.

CAM

000

MON

001

CAM

000

MON

001

CAM

000

MON

001

Preset

Save

Delete

Preset

Save

Delete

Input Preset No. (0~127)

PRESET DELETE

This function is to delete the preset position.

Press <Delete>.

1.

When a window appears as shown in the right fi gure,

2.

enter the preset number you want to delete and press <Enter>.
The camera will move to the preset position you want to delete.

3.

The system keyboard will show a message to confi rm the deletion.
Press <OK> to delete or <Cancel> to cancel the order.

CAM

000

MON

001

CAM

000

MON

00100

CAM

000

MON

001

Clear Enter

Preset

Save

Delete

Input Preset No. (0~127)

Clear Enter

Input Preset No. (0~127)

Are you sure you want to

delete preset 005?

Cancel OK

16_ instructions

English _17

M INSTRUCTIONS

Clear PRESET mode

1

000

001

000

001

000

001

000

1

000

1

Press <EXIT> icon on the right below to go out of the PRESET mode.
It will return to the camera control mode.

CAM

000

MON

00100

Preset

Save

Delete

CAMERA TITLE input

W

You can title the selected camera.

1.

Press the camera title line to call the title input page on the screen.

English small letter input page will appear.

2.

Press <TEXT> if you want to enter large letters.

3.

CAM

000

MON

00100

CAM

000

MON

001

TEXT text Number Symbol
Back Space Clear OK

CAM

000

MON

00100

TEXT text Number Symbol

Back Space Clear OK

Press <Number> if you want to enter numbers.

4.

Press <Symbol> if you want to enter symbols.

5.

Press a word at a time until you complete the title you want.

M

Maximum 14 characters can be entered.

Press <Back> to delete the last word.

-

Press <Space> to leave a column vacant.

-

Press <Clear> to delete all the characters entered.

-

Press <OK> to save the title you entered.

-

CAM

000

MON

001

CAM

000

MON

001

Press the <EXIT> icon to cancel the title and return to the camera control mode.

TEXT text Number Symbol
Back Space Clear OK

TEXT text Number Symbol
Back Space Clear OK

instructions

001

001

001

CAMERA connection information

W

Press the part marked as shown
of DVR that are connected to the selected camera.

in the right fi gure

to know the number

CAM

000

MON

001

A window will appear as shown
camera number display part.

in the right fi gure

when you press the

CAM

000

MON

001

CAM

000

Connecting Info.

DVR

001

Move to the connected device

When you press <DVR 001> on the connection information screen, DVR 001 will be selected and the screen
will be changed into the DVR control mode.

Enter the number of the connected DVR

1.

Press the [DVR] button of the keyboard on the connection information screen.

2.

While the number is highlighted, enter the number of the connected DVR by using the number keys and
press the [ENTER] button.

CAMERA MENU

W

Press the <SETUP> icon on left below to control the menu of the selected
camera.

CAM

000

MON

001

Using the direction key and the <Enter> key, control the CAMERA
MENU.
Press the <EXIT> icon to clear the camera menu.

M

When you control the menu of SAMSUNG DOME CAMERA, you can use the joystick
as a direction or enter key by moving it or after pressing the AF button of it.

18_ instructions

CAM

000

Camera Setup

Enter

English _19

M INSTRUCTIONS

DVR CONTROL

001

002

1

Please refer to the manual of each DVR since DVR’s functions are varied depending on the model.
Press the [MENU] button on the DVR set, then go to “System  Remote Control Device” in the Settings menu to
ensure that "Samsung System Keyboard" is properly set. The DVR will be controllable after the appropriate settings
(ID, baud rate, etc.) are set.

DVR selection

Press the [DVR] button.

1.

Enter the DVR number (0~255) you want by using the number keys

2.

and press [ENTER] button.
Varied window will appear depending on the DVR model.

3.

If you press the [DVR] button in the Camera Control mode, the DVR Input Box will be displayed in the screen as follows.

M

Then, select DVR in the same manner as above.

Examples of DVR selecting

1. SHR-4081, SHR-4160

CAM

000

MON

00100

DVR

000

DVR

013

SHR-4081

MON

000

Record

Panic

REC Lock

Search

Alarm

2. PC DVR

DVR

011

SPR7416

MON

000

4 div.

9 div.

16 div.

Rotate

3. SHR-5040, 5042

DVR

002

SHR-5042

MON

000

Search

Record

Alarm

Mode

Freeze

Mode

Freeze

Zoom

Search

Emergency Rec

Alarm O

Zoom

Audio

Eject

DVR

013

SHR-4081

MON

001

DVR

011

SPR7416

MON

000

DVR

002

SHR-5042

MON

002

Select Channel

Select Channel

Select Channel

instructions

002

002

4. SHR-2XXX Series, SHR-508X, 516X Series

DVR

012

SHR-5082

MON

000

DVR

002

SHR-5082

MON

002

Record

Search

Alarm

Audio

Select Channel

Mode

Freeze

Zoom

Eject

DVR

012

SHR-5162

MON

000

DVR

002

SHR-2042

MON

002

Select Channel

Select Channel

Controlling the PTZ device connected to the DVR

PTZ devices connected to some DVRs may not be controllable, depending on the DVR model.
In this case, press the <EXIT> icon in DVR Control mode and move to Camera Control mode to control the
corresponding camera.

Setting the PTZ device from the DVR

Select DVR MENU.

1.

Go to “Camera  PTZ Device Settings” in the Settings menu.

2.

A screen to set the camera available will be displayed in the DVR Control mode.

3.

Enter each item and then press the [ENTER] button. (For more information, please refer to the DVR user
manual.)

After completing setup of the camera, exit from the DVR MENU and then reselect the DVR using the

4.

keyboard (DVR + DVR number + ENTER).

The PTZ Device Settings feature from the Settings menu and Camera may be enabled, depending on the DVD model. In this

M

case, set “Device” from the “Settings menu  System  Remote Control Device” as “None” and then try resetting the PTZ
device.

Selecting and operating the camera using the System Keyboard in DVR
Control mode

Press the [CAM] button on the keyboard in DVR Control mode.

1.

The <PTZ> icon will appear at the left side of the screen as in the

2.

following image.

3.

Using the number keys on the keypad, enter the Channel number of
the camera you wish to operate and press the [ENTER] button.

4.

The camera can be operated after the following screen is displayed.

M

Press the <Camera Setup> icon at the bottom center of the DVR Control mode
screen to control the currently selected Camera MENU.

M

PRESET feature and SCAN, AUTO PAN, PATTERN and other features of the selected
camera can be operated.

DVR

002

SHR2042

MON

000

DVR

002

SHR2042

MON

000

01

Record

Search

Alarm

Audio

Record

Search

Alarm

Audio

Mode

Freeze

Zoom

Eject

Mode

Freeze

Zoom

Eject

20_ instructions

English _21

M INSTRUCTIONS

DVR channel selection

Press the <CH> icon below

1.

on the DVR screen.
A channel selection screen

2.

will appear as shown in the

DVR

011

SPR7416

MON

000

4 div.

9 div.

16 div.

Rotate

Search

Record

Alarm O

DVR

011

SPR7416

MON

000

Select Channel

right figure.
Select the channel you want.

3.

Press the <EXIT> icon on the lower right to finish selecting and return to the DVR control screen.

4.

DVR channel can be selected by using the number keys (0~9) of the keyboard.

M

DVR MENU control

Press the <SETUP> icon on the lower left to control the menu of the
selected DVR.

Using the Direction key and the <Enter> key, control the DVR MENU.
You can use the joystick as a direction or enter key by moving it or using

the AF button.
Press the <EXIT> icon to finish controlling the DVR MENU.

DVR

000

SPR7416

DVR Setup

Enter

MENU setup

MAIN MENU

Press the [MENU] button of the keyboard and a log-in window will appear

1.

as follows.
Using the number keys, enter the correct Operator No. and Password.

2.

MAIN MENU will be displayed on the screen when you complete the log-in

3.

process.
Press the item you want to control on the main menu.

4.

Press the <EXIT> icon in the main menu to return to the camera control
mode.

If the CHECK PASSWORD item is set “Off” in the keyboard setup, press the [MENU] button. MAIN

M

MENU screen will directly appear without the log-in process.

M

If you press the [MEMU] button while the OPERATOR’s LEVEL is the MANAGER’s or
OPERATOR’s level, you cannot go into the menu.

KEYBOARD SETUP

On MAIN MENU, press <Keyboard Setup> to call the Keyboard Setup screen.
The KEYBOARD SETUP menu are constituted by 7 main items as follows.

Login

Operator No. Password

MENU

MAIN

Keyboard

Setup

Keyboard Setup

Camera Setup

DVR Setup

001

RS-485 Communication Setup
Change Password
Check Password On

Register New Operation
Camera Data Download
Camera Data Upload
System Information and Setup

Clear

Enter

000

RS-485 COMMUNICATION SETUP

On the Keyboard Setup menu, press <RS-485 Communication Setup>
and the RS-485 Communication Setup menu will appear on the screen.

M

The default address of the keyboard is 0.

M

The default Baud Rate of the keyboard is 9600BPS.

M

The factory default setting of Duplex of keyboard is Half Duplex.

ADDRESS SET

The address of the system keyboard can be set.

Press <Address Set> and the keyboard address input window will

1.

appear as shown in the right figure.

2.

Enter the address by using the number keys and press the [ENTER]
button.
Press the <EXIT> icon on lower left if you want to clear the window
without entering the address.

ADDRESS "0": For only one unit

M

ADDRESS "1~32": For multiple units connected together
When using multiple units that are connected together, you must select a number between 1 and 32 before use.

M

If the value is set to "0", this may cause communication to fail and malfunction.
When using multiple units connected together and operating two separate keyboards at the same time, the first keyboard to start

M

communication takes precedence.

Keyboard

Setup

Keyboard

Setup

RS-485 Communication Setup

¨Address Set 0
¨Protocol (Port 1) SAMSUNG
¨Protocol (Port 2) SAMSUNG

¨Baud Rate 9600
¨Duplex Half Duplex

Input Keyboard Address (0~32)

Clear Enter

22_ MENU setup

Protocol Port1/Port2

S

p

p

d

S

p

p

d

S

p

p

d

S

p

The protocol of the RS-485 communication can be set.
RS-485 communication of the system keyboard supports Camera

Protocol as follows.
Choose one protocol among SAMSUNG / Pelco-D / Pelco-P / Vicon /

Panasonic / Kalatel / Diamond / AD / Philips / Erna / VCL TP / Techwin /
Honeywell.

You can control two protocols simultaneously by specifying different protocols

M

for Port 1 and Port 2.
The multimedia protocol provided by us may not be supported depending on the

M

installation conditions. Please contact us or the store of your purchase if you have a
problem or question about installing the protocol.

Baud Rate

The Baud Rate of the RS-485 communication can be set.

Press <Baud Rate> and a pop-up window will appear as shown in

1.

the right fi gure.
RS-485 communication of the system keyboard supports Baud Rate
as follows.

Keyboard

Keyboard

Setup

etu

Keyboard

Keyboar

etu

Setup

Keyboard

Keyboar

Setup

etu

RS-485 Communication Setup

RS-485 Communication Setup

¨Address Set 0

¨Protocol 1(Port 1) SAMSUNG

¨Protocol 1(Port 2) SAMSUNG

¨Baud Rate 9600
¨Duplex Half Duplex

¨Address Set 0
¨Protocol 1(Port 1) SAMSUNG

¨Protocol 1(Port 2) SAMSUNG

¨Baud Rate 9600
¨Duplex Half Duplex

¨Address Set 0
¨Protocol (Port 1) SAMSUNG
¨Protocol (Port 2) SAMSUNG

¨Baud Rate 9600

¨Duplex Half Duplex

SAMSUNG
Pelco-D
Pelco-p
Vicon
Panasonic
Kalatel
Diamond

RS-485 Communication Setup

RS-485 Communication Setu

SAMSUNG
Pelco-D
Pelco-p
Vicon
Panasonic
Kalatel
Diamond

RS-485 Communication Setup

RS-485 Communication Setu

AD
Philips
Erna
VCL TP
Techwin
Honeywell

AD
Philips
Erna
VCL TP
Techwin
Honeywell

1200
2400
4800

9600
19200
38400

M MENU SETUP

1200/ 2400/ 4800/ 9600/ 19200/ 38400.

2.

Among these 6 kinds of Baud Rate, select one Baud Rate.

Duplex

You can set the duplex mode of system keyboard.

1.

Press <Duplex>, and then the following window pops up.
Full Duplex / Half Duplex.

2.

Select one of the two duplex.

Press the <EXIT> icon on the lower left to fi nish RS-485 COMMUNICATION SETUP

M

control and return to the KEYBOARD SETUP screen.

CHANGE PASSWORD

This function is to change the operator's password of the system keyboard.

Keyboar

Keyboard

etu

Setup

Keyboard

Setup

RS-485 Communication Setup

RS-485 Communication Setu

¨Address Set 0
¨Protocol (Port 1) SAMSUNG
¨Protocol (Port 2) SAMSUNG

¨Baud Rate 9600

¨Duplex Half Duplex

Change Password

Enter Operator No.

Enter Password

Full Duplex
Half Duplex

Clear

Enter

1.

At fi rst, enter the current Operator No. and Password.

2.

Correctly entered, the screen will change into a window as follows.

Keyboard

Setup

Change Password

Enter New Password

¾¾¾¾¾¾

Con rm New Password

¾¾¾¾¾¾

Clear

Enter

English _23

MENU setup

S

p

New Password

Enter the new password.

1.

Enter the password by using the number keys (0~9) and press the [ENTER] button.

2.

M

Maximum 6-digit fi gure can be entered.

Confi rm New Password

This is to confi rm the new password.
Enter the password by using the number keys (0~9) and press the [ENTER] button.

M

If the entered number is not same as the New Password, an error message “Invalid Password!!” will be displayed on the screen.
You have to start again from entering the operator no.

CHECK PASSWORD

If it is set <On>, a window will appear to ask the operator no. and password
when you entering the “MENU” screen.

If it is set <Off>, you can directly enter the “MENU” mode.

M

The system has been set <On> on shipment.

REGISTER NEW OPERATOR

This function is to add a new user of the keyboard.

New Operator No.

Enter a new operator no..

1.

Using the number keys 0~9, enter the operator no. and press the

2.

[ENTER] button.

M

The number can be one between 1 and 99.

Keyboard

Keyboard

Setup

etu

Keyboard

Setup

RS-485 Communication Setup
Change Password
Check Password

Register New Operater
Camera Data Download
Camera Data Upload
System Information and Setup

Register New Operator

Enter Operator No.

On

O

Clear

Enter

New Password

Enter a new password.

1.

Using the number keys 0~9, enter the password and press the

2.

Keyboard

Setup

[ENTER] button.

Maximum 6-digit fi gure can be entered.

M

24_ MENU setup

Register New Operator

New Password

¾¾¾¾¾¾

Con rm New Password

¾¾¾¾¾¾

Clear

Enter

English _25

M MENU SETUP

Confi rm New Password

d

S

p

This is to confi rm the new password.
Enter the password by using the number keys (0~9) and press the [ENTER] button.

If the entered number is not same as the New Password, an error message “Invalid Password!!” will be displayed on the screen. You

M

have to start again from entering the operator's number.

A window will appear as in the right fi gure when the confi rm process is
completed.

- Operator No. : Newly registered use's number

- Password : New password is displayed. (******)

- Operator Level : The level of the new user can be set.

Operator Level

Press <Operator Level> to set the level.
You can choose one level among Admin. / Manager / Operator.

M

DEFAULT OPERATOR LEVEL is Operator level.
Please refer to the ”OPERATOR LEVEL” for the details. (see page 28)

CAMERA DATA DOWNLOAD

Keyboard

Setup

Keyboar

Keyboard

Setup

etu

RS-485 Communication Setup

¨Operator No. 2
¨Password ¾¾¾¾¾¾
¨Operator Level Operator

RS-485 Communication Setup

RS-485 Communication Setup

¨Operator No. 2
¨Password ¾¾¾¾¾¾

¨Operator Level Operator

Admin.

Manager

Operator

This function is to download the setup data of SAMSUNG DOME.

DOWNLOAD check screen

If you want to download the data for the fi rst time

Download the setup data of the currently selected camera.

1.

Press <OK> to start downloading.

2.

Press <Cancel> or the <EXIT> icon to return to the Keyboard Setup

3.

screen.

If you want to download the data on the system

An informing message will appear if there is already data stored in the

1.

system keyboard.
Press <OK> to start downloading.

2.

Press <Cancel> or the <EXIT> icon to return to the Keyboard Setup

3.

screen.

Keyboard

Setup

Keyboard

Setup

Camera Data Download

Now, Starting download

Camera 000 data.

Cancel OK

Camera Data Download

Camera 000 data is already

On your System.

Now Overwriting this data with

Camera 001 data.

Cancel OK

DOWNLOAD process screen

A download process screen will appear as shown in the right fi gure when
you press <OK> on the down load check screen.

Keyboard

Setup

Camera Data Download

Camera 000

Downloading......

MENU setup

A message will appear when downloading is completed.

Keyboard

Setup

Camera Data Download

Camera 000

Download Complete !!

CAMERA DATA UPLOAD

This function is to download the data set in SAMSUNG DOME CAMERA and upload them to a new camera.

UPLOAD check screen

If there is no camera data stored in the system keyboard

Camera DATA uploading is not possible.
Press <OK>, <Cancel>, <EXIT> icon to return to the Keyboard Setup
screen.

Keyboard

Setup

Camera Data Upload

No Camera Data On your System.

Cancel OK

If camera DATA are stored

A message will appear to inform that the camera data, which are now
stored, will be uploaded to the selected camera.
Press <OK> to start uploading.
Press <Cancel> or <EXIT> icon to return to the Keyboard Setup screen.

UPLOAD progress screen

When you press <OK> on the UPLOAD check screen, UPLOAD

1.

progress screen will appear as in the right figure.

Complete message will appear when uploading is completed.

2.

Keyboard

Setup

Keyboard

Setup

Keyboard

Setup

Camera Data Upload

Now, Starting upload

Camera 000 data to Camera 001.

Cancel OK

Camera Data Upload

Camera 000

Uploading......

Camera Data Upload

Camera 000

Upload Complete !!

26_ MENU setup

English _27

M MENU SETUP

SYSTEM INFORMATION AND SETUP

p

S

p

p

d

S

p

S/W Version

Displays the present version.
It is not available to set.

Language

Displays the present Set language.

1.

Press the <Language> to change the language.

2.

System keyboard supports English / Français / Deutsch / Español /
Italiano/ ĬŏōōņńŅ / Polski/ 中國語 / 한국어 / Ă&4,:5Ã3,±& / 日本語 /
PORTUGUÊS / DUTCH / DANSK / HRVATSKI.
Select a language among these languages.

Factory Default Setup

Resets all of the menu values to the default value.
Press <OK> to start the default setting.

The system will start again when the Factory Default Setup is completed.

M

Keyboard

Setup

Keyboard

Keyboard

Setup

etu

Keyboard

Setup

System Information and Setup

 S/W version v1.00_080531
¨Language English
¨Load Factory Default

¨Display Mode Normal

System Information and Setup

System Information and Setu

 S/W version 5000-02L

¨Language English

¨Load Factory Default

¨Display Mode Normal

English
Français
Deutsch
Español
Italiano
Русский
Polski

中國語

Load Factory Default

Do you want to

Load Factory Default?

Cancel OK

한국어

ČESKY
TÜRKÇE

日本語

PORTUGUÊS
DUTCH
DANSK
HRVATSKI

Display Mode

Press the <Display Mode> to change the display mode.

1.

Set the default display mode to <Video> or <Normal>.

2.

Your setting will be applied when you restart the system.

M

To change the display mode, simply tap the screen if you want to switch from the

M

current mode.

Keyboar

Keyboard

etu

Setup

System Information and Setup

System Information and Setu

 S/W version v1.00_080531
¨Language English
¨Load Factory Default

¨Display Mode Normal

Video
Normal

MENU setup

OPERATOR LEVEL

There are 3 levels of user, who can be registered as a user, including Admin. / Manager / Operator.
Admin is the highest level. The range and limit to the usage of various setup menu and system function depends on the
user's level.

Admin. Manager Operator

Camera Setup O X X

DVR Setup O X X

PTZ Control in DVR Mode O O X

Preset Save O X X

Preset Delete O O X

Save Camera Title O O X

MENU Button O X X

Save Connect Information O X X

Save Connected Monitor O O X

Move Jog/Shuttle O O X

Move Joystick O O X

DVR Search O O X

DVR Search (including PLAY Button) O O X

Record On/Off O O X

Select Camera/DVR O O O

Camera Setup in DVR Mode O X X

28_ MENU setup

others

PRODUCT SPECIFICATION

Item Description

CONNECTOR TYPE : 8P TERMINAL TYPE

INTERFACE(RS-485)

TFT LCD PANEL

USB PORT (USB 2.0) S/W Upgrade

VIDEO INPUT/OUTPUT Composite Video 1.0Vp-p, 75ohm, BNC Type, Loop Through out

OSD 16 Language (Eng/Fre/Ger/Spa/Ita/Rus/Pol/Kor/Cze/Tur/Chi/Jpa/Bra(Port)/Neth/Denma/Croatia)

MULTI PROTOCOL(CAMERA)

JOY STICK 3D JOY STICK (PAN/TILT/ZOOM)

LED MONITOR, CAMERA, DVR

PORT : 2 PORT

BAUD RATE : 1200 / 2400 / 4800 / 9600 / 19200 / 38400 bps

4.3" TFT LCD PANEL + TOUCH PANEL

EFFECTIVE DISPLAY AREA : 95.040mm[H] x 53.856mm[V]

NUMBER OF DOTS : 1440[H] x 272[V]

DOT PITCH : 66.0㎛[H] x 198.0㎛[V]

Pelco-D, Pelco-P, Vicon, Panasonic, GE-Khalatel, Diamond,

American Dynamic,Philips,Erna,VCLTP,Samsung Electronics ,Techwin, Honeywell

PAN : LEFT / RIGHT

M OTHERS

TILT : UP / DOWN

IRIS : CLOSE / OPEN

PAN/TILT & LENS CONTROL

DVR CONTROL

POWER DC 12V

POWER CONSUMPTION 4W

OPERATION TERPERATURE 0˚C ~ 40˚C

OPERATION HUMIDITY RANGE 20 ~ 85%

DIMENSIONS(WxHxD) 428mm x 137mm x 199mm

FOCUS : FAR / NEAR

ZOOM : TELE / WIDE

PRESET, PATTERN, AUTO PAN, SCAN

AUX1, AUX2, AUX3, AUX4

Target : SAMSUNG DVR

SW : RW, STOP, PLAY, FF, REC

JOG/SHUTTLE : FORWARD/REVERSE, PLAY/REVERSE PLAY/FF/RW

WEIGHT 1.415Kg (NET)

English _29

others

TROUBLESHOOTING (FAQ)

PROBLEM SOLUTION

•

Check the RS-485 communication line.

The system keyboard communication is

not worked.

The password in the screen of system log

in is lost.

Replace the LCD panel when its expected life is over.

M

Check the address setup of system keyboard.

•

Refer to “RS-485 Communication Setup” of “Menu Setup” for the method of address

•

setup. (see page 22)

Supply power to the system keyboard while you are pressing the [MENU] and [ENTER]

•

buttons on the keyboard simultaneously.

Press buttons until the “Beep” sounds.

•

System is reset to the factory default with a “Beep” sound.

•

Log in after the completion of reset. Refer to “Log-in” of “ Instructions” for the method

•

of login. (see page 14)

30_ others

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the

end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should
not be mixed with other commercial wastes for disposal.

(Waste Electrical & Electronic Equipment)

Code No. AB82-01969A-01