Samsung SRN-473S User Manual

NETWORK VIDEO RECORDER

User Manual

SRN-473S/873S/1673S

Network Video Recorder

User Manual

Trademark

The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company.

Restriction

Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.

Disclaimer

Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibilit y. Samsung Techwin reserves the right to change the contents of this document without prior notice.

Design and specifications are subject to change without prior notice.

The initial administrator ID is “admin” and the password should be set when logging in for the first time.

Set password for your wireless network if you use the product with a wireless router. Being not protected with password or using the default wireless router pa ssword may expose your video data to potential threat. Please change your password every three months to safely protect personal information and to prevent the damage of the information theft. Please, take note that it’s a user’s responsibility for the securi ty and any other problems caused by mismanaging a password.

is the registered logo of Samsung Techwin Co., Ltd.

overview

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

● OVERVIEW

Standards Approvals

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

English _3

overview

BEFORE START

This manual provides operational information necessary for using the product and contains a description about each component part and its function as well as menu or network settings. You have to keep in mind the following notices :

• SAMSUNG retains the copyright on this manual.

• This manual cannot be copied without SAMSUNG's prior written approval.

• We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.

• Prior to opening the case, please consult a qualified technician first. Whenever this is needed power must be removed from the unit.

• Before adding a hard disk drive or external storage (USB memory, USB HDD, etc), check if it is compliant with this product. For the compatibility list, contact the retailer.

Warning

Battery

It is essential that when changing the battery in the unit, the replacement battery must be of the same type otherwise there may be a possibility of an explosion.

The following are the specifications of the battery you are using now.

• Normal voltage : 3V

• Normal capacity : 65mAh

• Continuous standard load : 0.2mA

• Operating temperature : -20°C ~ +60°C (-4°F ~ +140°F)

• A secondary battery (Rechargeable)

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA.

"Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate."

Caution

• Connect the power cord into a grounded outlet.

• The Mains plug is used as a disconnect device and shall stay readily operable at any time.

• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the

Instructions.

System Shutdown

Turning off the power while the product is in operation, or undertaking improper actions may cause damage or malfunction to the hard drive or the product. To safely turn off the power, check <OK> in the system termination pop up window and then remove the power chord. You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)

If powered off abnormally, restarting may take more time for restoring data from hard disk drive for proper operation.

4_ overview

Operating Temperature

The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F). This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one. Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand at room temperature for a period. Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F). Likewise, the hard drive may not work at a temperature below the guaranteed one.

Ethernet Port

This equipment is in door use and all the communication wirings are limited to inside of the building.

Security Precautions

The initial administrator ID is “admin” and the password should be set when logging in for the first time. Set password for your wireless network if you use the product with a wireless router. Being not protected with password or using the default wireless router password may expose your video data to potential threat. Please change your password every three months to safely protect personal information and to prevent the damage of the information theft. Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.

● OVERVIEW

English _5

overview

CONTENTS

OVERVIEW

INSTALLATION

CONNECTING WITH OTHER DEVICE

LIVE

3 Important Safety Instructions 4 Before Start 6 Contents 8 Features 12 Part Names and Functions (Front) 13 Part Names and Functions (Rear) 15 Remote Control

17 Checking the Installation Environment 18 Rack Installation 19 HDD Addition

26 Connecting to an External Device 27 Connecting the USB 28 Connecting the Alarm Input/Output 31 Connecting the Network

34 Getting Started 38 Live Screen Configuration 45 Live Screen Mode 49 Zoom 50 PoE Status 51 Layout 52 Audio ON/OFF 52 Freeze 53 Event Monitoring 54 Maintain the Screen Ratio 55 Display Text 56 PTZ Control

6_ overview

MENU SETUP

59 System Setup 70 Setting the Device 89 Setting the Recording 93 Setting the Event 97 Network Configuration

SEARCH & PLAY

109

109 Search 113 Playback

● OVERVIEW

STARTING WEB VIEWER

115

LIVE VIEWER

118

SEARCH VIEWER

128

SETUP VIEWER

133

115 What is Web Viewer? 116 Connecting Web Viewer

118 Live Viewer 120 Live Screen Configuration 126 Controlling a Connected Network Camera

128 Search Viewer

133 Setup Viewer

BACKUP VIEWER

151

APPENDIX

153

151 SEC Backup Viewer

153 Product Specification 159 Product Overview 162 Default Setting 166 Troubleshooting 170 Open Source License Report on the Product

English _7

overview

FEATURES

The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring environment for video and audio over the network using a remote computer.

• User-friendly UI

• VGA, 4CIF, record in a max of 4096x2160 (8M pixel) supported

• Record and play video

• Record and play audio

• Supports ONVIF Profile S standard and RTP / RTSP protocols

• Full HD video output via HDMI

• Display the HDD operation status by HDD SMART

• HDD overwrite enabled

• Backup using USB 2.0 protocols and external HDD

• Simultaneous playback of 4, 8, or 16 channels

• Various Search Modes (Search by Time, Event, Text, Backup)

• Various Recording Modes (Normal, Event, Scheduled Recording)

• Alarm Input / Output

• Remote Monitoring function by Windows Network Viewer

• Live monitoring of the network camera

• Installation Wizard Function (Quick Setup)

8_ overview

Package Contents

Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit.

SRN-473S

RECALARMPOWER

NVR Mouse

Power Cable Power Adaptor

Network Viewer Software /

User Manual CD

` Two additional screws are provided to install an HDD for models that come without an HDD installed.

NETWORK VIDEO RECORDER

User Manual or Quick Manual Terminal block

● OVERVIEW

Remote Control /

Remote Control Battery (AAA)

English _9

overview

SRN-873S

DV25

NETWORK VIDEO RECORDER

SRN-475S

NVR Mouse

REC HDD ALARM

NETWORK BACKUP

POWER

Power Cable

Network Viewer Software /

User Manual CD

Remote Control /

Remote Control Battery (AAA)

User Manual or Quick Manual Bracket rack Bracket mounting screws

Terminal block

10_ overview

SRN-1673S

NETWORK VIDEO RECORDER

USB

NVR Mouse

Power Cable

Network Viewer Software /

User Manual CD

Remote Control /

Remote Control Battery (AAA)

User Manual or Quick Manual Bracket rack Bracket mounting screws

Terminal block

● OVERVIEW

English _11

overview

PART NAMES AND FUNCTIONS (FRONT)

SRN-473S

RECALARMPOWER

bac

SRN-873S

NETWORK VIDEO RECORDER

SRN-1673S

NETWORK VIDEO RECORDER

Part Names Functions

LED Indicator

DV25

SRN-475S

REC HDD ALARM

NETWORK BACKUP

POWER

USB

REC : Lights on when recording is in progress.

HDD : Displays the normal access to HDD.

LED turns on when accessing the hard disk.

ALARM : Lights on when an event occurs.

NETWORK : Displays both network connection and data transfer status.

12_ overview

USB

Remote Reception System

BACKUP : Displays when Backup is in progress.

POWER : Shows the power ON/OFF status.

Connects the USB devices.

Receive the signal from the remote control.

PART NAMES AND FUNCTIONS (REAR)

SRN-473S

SRN-873S

SRN-1673S

1234567

PoE

CAMERA

123456789101112131415

PoE

CAMERA

a b

AUDIO

HDMI

OUT

VGA OUT

PoE

CAMERA

ALARM

OUT

ALARM

AUDIO

1 2 3

VIEWER

eSATA

VGA OUT

HDMICONSOLE

OUT

COM COM COM

1 2 3

NCNO NO NO

d ej g fb h ci

ALARM RESET

ALARM IN

1 2 3 4 5 6 7 8

NCNO NO NO

COM COM COM COM

1 2 3 4

ALARM OUT

VIEWER

CONSOLE

SWITCH

VGA OUT AUDIO OUTUSB

HDMIeSATA

VIEWER

● OVERVIEW

DC 54V

cdefgh

AC 100 240~IN

b hd k j g e f ic

Part Names Functions

Ground connection

PoE (CAMERA)

Power

VIEWER

SWITCH

A terminal to connect a separate ground cable.

` Make sure to add a ground cable in order to use the equipment safely.

Power supply port to connect to a camera.

Terminal to connect power to.

Port used to send video to the web viewer.

Port connected to a camera, and you can access the camera's web viewer to setup detailed camera settings.

English _13

overview

Part Names Functions

VGA OUT

AUDIO OUT

HDMI

ALARM

Power Switch

eSATA

USB

` [CONSOLE] is designed for the service repair purpose only.

VGA Video Signal Output Port.

Audio Signal Output Port (RCA jack).

HDMI connector port.

- ALARM IN : Alarm input ports.

SRN-473S : 1~2 CH SRN-873S : 1~4 CH SRN-1673S : 1~8 CH

- ALARM OUT : Alarm output ports.

SRN-473S : 1CH SRN-873S : 1~3 CH SRN-1673S : 1~4 CH

- ALARM RESET : Alarm Reset port.

` Applicable only to the SRN-1673S model.

Power on/off switch.

Ports used for external storage device connections.

Connects the USB devices.

14_ overview

REMOTE CONTROL

Displays the Exit pop up screen.

Used as the numeric input keys, or displays a single

Runs the digital zoom (x2) function.

Skip Backward (by unit time),

Slow Rewind, Slow Forward,

NUMBER [0~+10]

Displays or ends PTZ.

Displays the search menu.

Changes the screen mode.

Display the live screen menu.

Displays the Preset Setup.

Freezes the screen temporarily.

Skip Forward (by unit time)

POWER

channel.

PTZ

T/W

Zooms in or out.

MODE

PRESET

FREEZE

ZOOM

REC

Starts or ends the live recording.

Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key.

SCROLL ,.

Moves the menu scroll.

VIEW

Runs the View function in the PTZ mode.

BACKUP

Displays the Backup Menu.

RETURN

Returns to the previous screen.

Up/Down/Left/Right($%_ +)/ENTER

Moves the cursor up/down/left/right, and runs the Select Menu.

REC LOCK

Selects the recording lock function.

AUDIO

Turns Audio on/off.

ALARM

Cancels the Alarm.

Move Frame

While paused, moves to the previous/next frame.

● OVERVIEW

FR, STOP, PLAY/PAUSE, FF

English _15

overview

Using the Numeric buttons

CHANNEL 1–9 Press each button between 1 to 9.

CHANNEL 10 Press the [+10] button first, then press the 0 button again within 3 seconds.

CHANNEL 11–16 Press the [+10] button first, then press any number between 1 to 6 within 3 seconds.

Changing the Remote Control ID

Remote control’s ID and NVR’s ID should be matched for proper operation.

1. Press the [ID] button of the remote control and check the ID displayed on the NVR screen.

The factory default ID of the remote control is 00.

2. Enter 2 digits of your selection in order, while pressing the [ID] button of the remote control.

3. When ID input is done, press the [ID] button of the remote control again to check the setting.

` If you want to change the remote control ID to 08: Press 0 and 8 in order while the [ID] button of the remote control is

pressed. For changing the ID of remote device, refer to “Remote Devices”. (Page 85)

16_ overview

installation

Please take note of the followings before using this product.

• Do not use the product outdoor.

• Do not spill water or liquid in the connection part of the product.

• Do not impose the system to excessive shock or force.

• Do not pull out the power plug forcefully.

• Do not disassemble the product on your own.

• Do not exceed the rated input/output range.

• Use a certified power cord only.

• For the product with an input ground, use a grounded power plug.

CHECKING THE INSTALLATION ENVIRONMENT

● INSTALLATION

This product is a top-notch security device that is equipped with a high-capacity HDD and other key circuit boards.

Note that an excessive internal temperature of the product may cause a system failure or a shortened product life (see the right figure). Keep in mind the following instructions before installing the product.

When mounting the product on a rack, comply with the following instructions.

1. Please ensure that the rack inside is not sealed.

2. Please ensure the air is circulated through the inlet/outlet as shown in the picture.

3. If you pile up the prudcts or other rack-mount devices as shown in figure 2, secure room for

ventilation or install a vent.

4. For natural air convection, place the inlet at the bottom of the rack and the outlet on top.

5. It is strongly recommended that a fan motor is installed at the inlet and the outlet for air

circulation. (Please fit a filter at the inlet to screen dust or foreign substances.)

6. Please maintain the temperature inside the rack or surrounding areas between 0°C ~ 40°C

(32°F ~ 104°F) as shown in the figure 1.

Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions :

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the

operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required

for safe operation of the equipment is not compromised.

C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is

not achieved due to uneven mechanical loading.

D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit

and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should

be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

Temperature Unit: ºC

One Year: 24HR X 365 DAY =8,760 HR

Life (Unit: HOURS)

[Figure 1]

[Figure 2]

English _17

installation

RACK INSTALLATION

Install the Bracket-Rack as shown in the figure, and then fasten the screws on both sides (2 screws on each side).

` Fix the screws not to be loosened by vibrations.

Cautions when Installing in the Rack

To install multiple NVRs in the rack, make sure to separate the FOOT at the bottom of each NVR.

1. There are four FOOTs at the bottom of a NVR. Press the projected parts at both-ends of each “FOOT” and turn it counterclockwise.

2. “FOOT” is separated from the main body when it is turned to the end of fastening groove.

18_ installation

HDD ADDITION

Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the product.

` Number of HDDs supported : SRN-473S : max 1

SRN-873S : max 2 SRN-1673S : max 4 can be added.

` Make sure to unplug the power cord from the wall outlet before proceeding with the installation.

` Cautions for data loss (HDD care)

Please pay attention so that the data inside the HDD is not damaged. Before adding a HDD, please check the compatibility with this product. HDD is vulnerable to malfunction due to its sensitive nature especially against shock when operating. Please ensure that the HDD is free from such shock. We are not liable for any damage to the HDD incurred by user's carelessness or miss use.

` Cases might cause damage to HDD or recorded data

To minimize the risk of data loss from a damaged HDD, please backup data as often as possible. If exposed to shock when disassembling or installing, data stored in the hard disk may be damaged. A sudden power failure or turning off the product while in HDD operation may damage the hard disk drive. HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation.

Cautions when installing a HDD

● INSTALLATION

1. Do not apply excessive force to the HDD.

2. Pay attention so as not to lose the disassembly screws or accessories.

` If the screws or accessories are not put together correctly, the product may breakdown or not operate properly.

3. Please check the HDD compatibility before adding a HDD.

` Please contact your nearest dealer to obtain the list of compatible devices.

English _19

installation

Installing the HDD

` If the installed HDD had been used with other devices, it will be automatically formatted.

How to install an HDD in SRN-473S

1. After unscrewing, push back and remove the cover.

2. Loosen a setscrew of the bracket.

3. Push the bracket in the direction of the arrow on the

board and remove it.

20_ installation

4. After inserting the HDD into the bracket, tighten the

left and right screws to fix it.

5. Locate the bracket with the HDD installed in a

groove of the case, push it in the arrow direction and connect a power data port on the board.

6. Tighten a setscrew of the bracket.

● INSTALLATION

7. Close the cover, and tighten a setscrew in the back.

English _21

installation

How to install an HDD in SRN-873S

1. First of all, loosen the screws in the left, right, and back of the case, and remove the cover.

2. Loosen a screw from the HDD bracket and remove the bracket.

` While applying pressure to both side end grips of the bracket,

pull them forward to remove the HDD bracket from the main body.

ALARM

OUT

2 NO

NO NCNO COM COM COM

IN ALARM

CONSOLE

eSATA

VIEWER

7 8

5 6

PoE

CAMERA

1 2

3. After aligning and inserting one side of the HDD to

the bracket, open the other side bracket wide and insert the HDD between them.

` Align a hole in the bracket with a screw hole in the HDD to fix

them.

22_ installation

4. Push the bracket with the HDD installed and tighten

the screws to fix it.

5. Close the cover and tighten the screws to fix it.

ALARM

OUT

2 NO

NCNO

COM COM COM

ALARM

23 1

CONSOLE

eSATA

VIEWER

7 8

5 6

PoE

CAMERA

3 4

1 2

● INSTALLATION

English _23

installation

How to install an HDD in SRN-1673S

• How to open the front cover and install an HDD

1. Pull open the front cover.

2. Open the front cover and check the HDD installation

bracket.

` Release the USB connection before opening the front

cover to prevent damage to the USB port.

3. Push the latch to the right and remove the HDD

bracket.

` Take care not to scratch your hands when removing the

HDD bracket.

24_ installation

4. Align and insert HDD into the bracket home. After

inserting one side, push and insert the other side slightly.

5. Align the bracket with the HDD installed with the

enclosure latch, and push the bracket in the direction of the board.

` Push it until you hear the latch lock sound. If the HDD is

not completely connected, it may be detected.

6. Push the front cover upwards and close it.

● INSTALLATION

• How to exchange an installed HDD

1. Open a bracket wide in the direction of the arrow and

remove the holder from the HDD.

2. Open the other bracket wide and remove it from the

holder.

` The procedure after HDD exchange is the same as the

procedure for "Installing the HDD".

English _25

connecting with other device

HDMIeSATA VGA OUT AUDIO OUTUSB

12 3 4 56 7 8

COM COM COMCOM

NCNO NO NO

1 2 3 4

ALARM IN

PoE

ALARM OUT

ALARM RESET

CONSOLE

VIEWER

CAMERA

SWITCH

CONNECTING TO AN EXTERNAL DEVICE

` The following figures are based on Model SRN-1673S.

HDMI OUT

VIDEO OUT

(VGA)

` Unrated or improper power source may cause damage to the system. Ensure that you use only the rated power source

before pressing the POWER button.

AUDIO OUT

26_ connecting with other device

CONNECTING THE USB

1. On the front of the product, there is a USB port.

2. USB HDD, memory, or a mouse can be connected to USB ports.

If a USB HDD is connected to the system, recognition and settings are available in "Setup > Device > Storage

Device". (Page 83)

4. The product supports hot plugging function that enables connecting/disconnecting USB devices while in

operating the system.

` If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the NVR.

` Some USB devices may fail to function properly due to compatibility issue, please check the device before using. ` Only USB storage devices that comply with the standards (having a metal cover) are guaranteed for data transfer. In case if

the USB device’s electric contacts have been worn out, data transfer between the devices may not properly function.

● CONNECTING WITH OTHER DEVICE

English _27

connecting with other device

VIEWER

PoE

CAMERA

HDMI

VGA OUT

CONNECTING THE ALARM INPUT/OUTPUT

The Alarm In/Out port at the back is composed of the following.

SRN-473S

Sensors

Alarm

• ALARM IN 1 ~ 2 : Alarm Input Port

• ALARM OUT 1 : Alarm Output Port

ALARM IN (

5mA sink

N.O C N.C1 2 G

ALARM OUT

)

(

30VDC 2A,

125VAC 0.5A MAX

)

28_ connecting with other device

SRN-873S

12 3

1 2 3

NCNO NO NO

COM COM COM

ALARM

OUT

ALARM

VGA OUT

HDMI

CONSOLE

VIEWER

eSATA

PoE

CAMERA

1 2

3 4

5 6

7 8

Sensors

• ALARM IN 1 ~ 4 : Alarm Input Port

• ALARM OUT 1 ~ 3 : Alarm Output Port

N.O C N.C N.O C N.O C G1 2 3 4 G

1 2 3

● CONNECTING WITH OTHER DEVICE

Alarm

ALARM IN (

5mA sink

)

ALARM OUT

(

30VDC 2A,

125VAC 0.5A MAX

)

English _29

connecting with other device

HDMIeSATA VGA OUT AUDIO OUTUSB

12 3 4 56 7 8

NO COM COM COMCOM

NCNO NO NO

1 2 3 4

ALARM IN

PoE

ALARM OUT

ALARM RESET

CONSOLE

VIEWER

CAMERA

SWITCH

SRN-1673S

Sensors

Alarm

• ALARM IN 1 ~ 8 : Alarm Input Port

• ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing.

• ALARM OUT 1 ~ 4 : Alarm Output Port

1 2 3 4 5 6 7 8 A.R G

N.O C N.C N.O C N.O C N.O C G

30_ connecting with other device

ALARM IN (

5mA sink

)

ALARM OUT (

30VDC 2A, 125VAC 0.5A MAX

)

+ 162 hidden pages