Samsung SRF731GDLS, RFG26M Series Quick Start Manual

Counter Height Design
The Independent Mid Drawer(Flex zone) is counter
Height to fit contemporary kitchen.
Secure Auto Close Door System
System
Cool tight doors
Energy saving
Preventing sweat on fridge
doors
quick start guide
Product features
RFG26M***
Surround Multi Flow
Uniform cooling for each shelf and even in corner in fresh food compartment by centerpositioned fan and duct with multiple flow effluences.
Flex Zone
The Flex Zone is a full­width independent Mid Drawer with adjustable temperature control.
Twin Cooling System
The refrigerator and the freezer have two evaporators. Given this independent system, the freezer and the refrigerator are cooled individually as required and are, therefore, more efficient. Food odor from the refrigerator does not affect food in the freezer due to separate air flow circulation.
English
OPUS1-간단메뉴얼(RFG26M***).indd 1 2011.4.26 11:26:0 AM
The Installation Space
Selecting the best location for the refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with a leveled oor.
• A location with enough space for the refrigerator doors to open easily.
• Allow sufcient space to the right, left, back and top for air circulation. If the Refrigerator does not have
enough space, the internal cooling system may not work properly.
• Please ensure that appliance can be moved freely in the event of maintenance & service.
FLOORING
For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the floor. This surface should be strong enough to support a fully loaded refrigerator, or approximately 359lbs (165kg). To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving the refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side.
CAUTION
95mm
50mm
50mm
OPUS1-간단메뉴얼(RFG26M***).indd 2 2011.4.26 11:26:28 AM
Loading...
+ 4 hidden pages