Samsung SR-A20M, SR-26NME, SR-25NMB, SR-24WMF, SR-24WME User Manual

...

REFRIGERATOR CONTENTS

1.Safety precautions and warnings

2.Product specifications

3.Electrical part specifications & standard

4.Product dimension

5. Identifying and disassembling the parts

6.Schematic diagram of coolant gas circulation

7. Circuit diagram

8. Packing dimensin

9. Schematic siagram of cold air flow

10. Troubleshooting method 1 1. Exploded view & part list

Model: SR-21NME/21WME

SR-24NME/24WME

1.Safety precautions and warnings

－2－

SR-21/24 NME(WME)

Read all instructions before using this appliance in risk of accident order to avoid or property damage.

Warning

W arning

Caution

Description of symbolsWarning/Caution

This symbol is intended to alert the user to the posslble death or injury .

This symbol is intended to alert the user to the posslble injury or damage

In dicates prohibition

Do not disassemble Do not contant

Adhere the instruction strictly

Unplug from the electrical outlet Earth the appliance to avoid the risk of

an electric shock

Do not plug multiple electyical appliances into the same outlet.

●This may cause abnormal heating or fire hazard

Do not attempt to make repairs yourself

●

This could lead to fire hazard or abnormal operation causing severe personal injury.

Make sure the power cord is not crushed or damaged.

●

Repair immediately all power cords or outlets that have become frayed or otherwise damaged.

Check the operating environment.

●

Do not install the refrigerator in a humid(with condensation)location or on an unstable surface.

Do not attempt to make repairs yourself.

●

This could lead to fire hazard or abnormal operation causing severe personal injury.

Make sure the power cord is not crushed or damaged.

●

Repair immediately all power cords or outlets that have become frayed or otherwise damaged.

Prohibition

Do not

disassemble

Earth

Unplug

－3－

SR-21/24 NME(WME)

Caution

Do not store bottled food or drinks in the freezing compartment.

●Bottles may explode causing personal injury.

Do not store food in an unstable manner.

●Opening the door may trigger loose items to slip and cause injury.

Do not store anything other than food in the refrigerator.

●Medical supplies which need to be under strict not be stored in the refrigerator.

Do not put anything on top of the refrigerator.

●

Opening or closing the door may trigger loose items to slip and cause injury.

When replacing electric comporents, be sure to use rates comporents.

●

Check the model, rated voltage, rated current, operating temperature etc. of the component.

When servicing the refrigera-tor, completely remove dust or foreign substances from the housing,electric conne-ctions and etc.

●

This can proect against the risk of fire hazard caused by tracking and short circuit.

When servicing the refrigerator, completely remove dust or foreign substances from the housing, electric connections and etc.

●

This can protect against the risk of fire hazard caused by tracking and short circuit.

After serving the refrigerator, be sure to check the components are reassembled in a correct manner.

●

The serviced unit should be reassembled and returned to its original assembly state.

Check the electrical parts for the trace of moisture penetration.

●

When the trace of moisture pentration is detected, replace the part or dry insulation tapping.

Prohibition

Reted

components

2.Product Specifcations

－4－

SR-21/24 NME(WME)

ITEM

Model name

Type

Power source

ST ANDARD

Net capacity

(it/cu.ft)

Net dimension

(mm)

Freezer

Refrigerator

Total

Width

Depth

Height

Net weight (kg)

Refrigerant

Temperature control

Defrosting

Foam insulation

Cabinet

Door

Liner / Door panel

Accessory parts

Door

storage

inside

storage

interior Lamp(H/M)

Angle adjustment

SR-21NME/24WME

2-Door Freezer/Refrigerator

AC 115V/60HZ, 127V/60Hz

220V/50~60Hz, 230~240V/50Hz

D-134a(130gr)

Dial(Thermostat)

Automatic(Start-Finish by Timer)

R-141b R-141b

ABS

1(Refrigerator)

2Legs(Front)

2 Guard-freezer 1 Guard-egg 1 Guard-variety 2 Guard-bottle

1 Base-tray ice(H) 1 Case-tray ice, assy(H) 1 Tray-ice cube 1 Shelf0freezer, sub(H) 1 Cover-vegetable 1 Tray-vegetable

2 Shelf-refrigerator(H) 1 Tray-chilled room(H) 1 Cover-chilled room(H) 1 Shelf-freezer wire(L) 1 Tray-ice,b(L) 1 Shelf-ref wire(L)

52(1.8) 133(4.7) 182(6.5)

545 589

1453

1553

52(1.8) 133(4.7) 182(6.5)

SR-24NME,24WME

3. Electrical part specification & standard

－5－

SR-21/24 NME(WME)

ITEM

Model

Power source

Compressor

ST ANDARD

Model

Starting type

Oil charge

Freezer

Refrigerator

Bimetal

(ON/OFF)

Thermal fuse

Type

Cycle

Time

Model

Resistance

Thermostat

Defrost-thermo

Defrost-timer

Starting-relay

Over load

protector

Capacitor

Model

Close temp

Open temp

Running

Starting

Motor-fan

Heater-defrost

Lamp Door-switch Earth screw

Evaporator Condenser

Dryer

Capillary tube

SR-21NME, 21WME / SR-24NME, 24WME

R.S.C.R

FREOL

α-15c / 200cc

Split fin type

Forced & natual convection

Molecular sieve

I.D 0.75 x 3400 (mm)

8032

D705-E9C

115V/60HZ

SD152C-L1W2

C.S.R

Type

Oper. temp

Regularity

Oper. temp.

TMDE714F1

4TM427

PHBYY-53

4TM265

PHBYY-53

61±9℃

125±5℃

912X32E100MQ16APE2

33Ω±20%

4TM222

PHBYY -53

AC250V / 5A

ON:-5±3℃/OFF:12±3℃

AC 250V / 10A

72±4℃

TMD706SC1

6Hr 35min 13min 40s

912X32E100MQ16APE3(60Hz)

40Ω±20%

220V/50~60HZ

SD162H-L1U2

230~240V/50HZ

SD162Q-L1U2

125㎌ / 100VAC

8㎌ / 250VAC

IS3210SMF6D

130W/93Ω

110V / 15W

130W406.9Ω

220V/15W

130W443Ω

240V/15W

SSD-5 250V/0.5A

BSBN(Brass screw)

3.5㎌/350VAC

IS3210SNF7A

4.Product Dimension

－6－

SR-21/24 NME(WME)

MODEL

SR-21NME, 21WME SR-24NME, 24WME

1453 1553

874.5

974.5

Remark

366.5

1071.0

77.5

545.0

500.0

59.5

9.5 A

51.0

5.Identifying and dissembling the parts

－7－

SR-21/24 NME(WME)

T o remove shelves in the freezing compartment

●First remove the icemaking molds. Tilt the shell up at front, then lift it up pull it out of the tracks.

T o remove shelves in the chilled compartment

●Lift up the cover, push the cover to the right until the mounting hook disengages, then disengage the other mounting hook and pull out the cover.

●Pull the shelf forward until it stops. Then lift it up and pull it out.

T o remove door bins

●While pushing the bin to the left, left it up to disengage.

T o remove shelves in the refrigerating compartment

●Hold the shelf by the front and pull it forward of the rack.

T o remove storage drawers and covers

●Lift up to remove the cover. Pull the drawer out then lifting it up.

6. Schematic diagram of coolant circulation

－8－

SR-21/24 NME(WME)

COMPRESSOR → CLUSTER PIPE → HOT PIPE → DRYER → CAPILLARY TUBE

→ EV APORA T OR → ACCUMULA TOR → SUCTION PIPE → COMPRESSOR

PIPE-CLUSTER,B

ACCUMULA T ORB

EV APORAT OR

HOT-PIPE

PIPE-CLUSTER,A

SUCTION

PIPEA

CAPILLARY TUBE

DRYERA

COMPRESSOR

7.Circuit diagram

－9－

SR-21/24 NME(WME)

7-1. SR-21/24NME

F.M

YEL

WHT

BRN BRN RED PNK

ORG

S/BLU

S/BLU BLU

P.T.C RELAY

F-THERMOSTAT

THERMO FUSE

FAN MOTOR

COMPRESSOR

DEFROST TIMER

DEFROST HEATER

OVERLOAD PROTECTOR

BIMETAL THERMO

RUNNING CONDENSER

GRY

GRY - GRAY RED - RED BRN - BROWN

YEL - YELLOW

PNK - PINK BLK - BLACK

WHT - WHITE BLU - BLUE

S/BLU - SKY BLUE

RED

R/LAMP

W/BLK

DOOR-S/W

7-2. SR-21/24WME

F.M

YEL

WHT

MOTOR-PLMP

WATER-DISPENSER

MICRD-S/W

LED

BRN BRN RED

RED

BLK GRY

PNK

ORG

S/BLU

S/BLU BLU

P.T.C RELAY

F-THERMOSTAT

POWER-PCB

THERMO FUSE

FAN MOTOR

COMPRESSOR

DEFROST TIMER

DEFROST HEATER

OVERLOAD PROTECTOR

BIMETAL THERMO

RUNNING CONDENSER

GRY

GRY - GRAY RED - RED BRN - BROWN

YEL - YELLOW

PNK - PINK BLK - BLACK

WHT - WHITE BLU - BLUE

S/BLU - SKY BLUE

RED

R/LAMP

W/BLK

DOOR-S/W

+ 20 hidden pages