Samsung SPI-50 Quick Guide

IR illuminator

Quick Guide

SPI-50

Caution

CAUTION

RISK OF ELECTRIC SHOCK.DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.

THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE APPLIANCE.

Important Safety Instructions

Read these instructions.

1.

Keep these instructions.

2.

Heed all warnings.

3.

Follow all instructions.

4.

Clean only with dry cloth.

5.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

6.

7. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including

amplifiers) that produce heat.

8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus.

11. Unplug this apparatus when a card is used. Use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as powersupply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS :

1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

Caution

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS
A DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO
PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIP­MENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF
NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A
RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER
WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

English_3

Contents

OVERVIEW

5

INSTALLATION

6

SPECIFICATION

9

5 Product Features
5 What’s included

6

Mounting on the positioning system

8 How to set IR illuminator channel

9 Specification
10 Product Overview

4_ Contents

overview

Product Features

It enables you to identify objects even at night with no lighting.

1.

You can switch between Day/Night camera modes with the built-in sensor.

2.

You can use a single or dedicated bracket to attach the product to the positioning system.

3.

You can adjust the brightness of the lighting during the ZOOM operation.

4.

What’s included

Please check if your camera and accessories are all included in the product package.

IR illuminator body 2 Mounted in the positioning system and used

Mounting bracket 1 IR illuminator mounting bracket

Quick Guide

(Optional)

Warranty card

(Optional)

L-Wrench 1

Wrench bolts

(1/4”-1/2”)

1 -

1 -

Used when assembling the camera body and

9

Used when mounting the IR illuminator

bracket

Used when mounting the bracket

to the camera body (3EA)

on the bracket (6EA)

English_5

Installation

Mounting on the positioning system

Secure the bracket to the camera with the

1.

3 supplied bolts.

Connect the IR illuminator to the fixed

2.

bracket, using 3 bolts as shown.

6_ Installation

Insert the IR illuminator cable into the housing

3.

through the wiring hole in the bracket and the
hole in the back of the housing.

Connect the power cable and RS-485 cable of

4.

the IR illuminator to the board in the housing.

Wiring hole

Wiring hole

RS-485(+)

RS-485(-)

RS-485(+)

CH1

CH2

RS-485(-)

CH1

POWER(+)

CH2

POWER(-)

POWER(+)

POWER(-)

English_7

Installation

How to set IR illuminator channel

Open the round cover on the back of the IR

1.

illuminator.

You can set the illuminator channel using the DIP

2.

switch in the DIP switch cover.
Use only the 2nd DIP switch to set the illuminator
channel.
(The 1st and 3rd DIP switches are used to test
devices at the factory. Always set them to OFF.)

`Refer to the settings below.

When set to channel 1

Do not allow t he settings to be ch anged by anyone other t han the persons wh o install or manage

`

J

the product. Incorrect settings may cause the product to malfunction.

When ship ped from the fac tory, two IR illuminat ors are set to diff erent channels as Ch1 and Ch2.

`

If two IR ill uminators are set to th e same channel, comm unication error s will occur and they
cannot be u sed normally.

When set to channel 2

DIP switch

Used when setting channels

8_ Installation

Specification

Specification

Items

LED Type IR LED

Distance Performance 200m

Number of LED 9(EA)

Operational

Communication

Exterior

Electrical

Environmental



When using IR light projector, do not use CH1 and CH1 or CH2 and CH2 together as one set.

Contiunously variable
angle

Wavelength 850nm

Automatic Control

Between Camera &
illuminator

illuminator Identification

Weight(Kg) 0.9kg @1EA

Size(mm) (W)112 * (L)153.2 * (H)65.2

Material Aluminum + PC Cover

Power 24V AC(±10%) / 2A @2EA

Power Consumption MAX 24W(Brightness MAX)

Operational
Temperature

Ingress Protection IP67

Certification EMC(FCC, CE, VCCI, RCM, KC)

Fixed 25°

Automatic IR On/Off control related to Camera Day&Night,
Brightness can be controlled during zoom operation

RS-485 9600bps(Techwin Protocol)

For one camera, use CH1 and CH2 IR light projector together as
one set.

-40°C ~ +60°C

Description

SPI-50

English_9

Specification

Product Overview

Unit : mm

10_ Specification

Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide
customers with more environmentally friendly products.
The Eco mark represents Hanwha Techwin’s devotion to creating environmentally friendly products, and indicates that
the product satisfies the EU RoHS Directive.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories

(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working
life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.

Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human
health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your
local, free battery return system.

Head Office

6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400 Rep. of KOREA
Tel : [phone] Fax : [phone]
http://hanwha-security.com

Hanwha Techwin America

500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free : +1.877.213.1222 Direct : +1.201.325.6920
Fax : [phone]
www.hanwha-security.com

Hanwha Techwin Europe

Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel : [phone] Fax : [phone]
www.hanwha-security.eu

Hanwha Techwin(Tianjin) Co.Ltd

No.11, Weiliu Rd., Micro-Electronic Industrial Park, Jingang Road Tianjin 300385, China
Tel : [phone]
www.hanwha-security.cn

Hanwha Techwin Middle East FZE

JAFZA View 18, 20th floor, office 2001, 2002, 2003, Downtown Jebel Ali,
Dubai, United Arab Emirates
http://hanwha-security.com