Samsung SP-56K6HD, SP-50K6HD, SP-50K6HDX, SP-56K6HDX User Manual

DLP TV
Owner’s Instructions
SP-46K5HD SP-50K6HD SP-56K6HD
Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________

A Guide to Digital TV

• What is Digital Television?
Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital broadcast.

Digital Television Services

• Digital Picture Quality
DTV programs are transmitted in two different formats. The first is Standard Definition Television (SDTV) and the second is High Definition Television (HDTV).
• SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video. 480i programs are essentially a digital
version of our current analog TV programs, while the 480p format offers improved image detail over 480i. Some 480p programs are broadcast in widescreen and are comparable to progressive-scan DVD movies in image quality.
• HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p). Both HDTV formats are always broadcast
in widescreen, and offer much higher picture quality than SDTV.
• Dolby Surround Sound
With DTV, you can listen to a variety of Dolby digital audio formats from Dolby Surround 2.0 to Dolby Digital 5.1 surround, using your home audio system. Many HDTV programs are now broadcast with DD 5.1 soundtracks.
U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
English - 2
English - 3
Q&A
1. Is the antenna I use for existing TV reception good enough for DTV?
Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas.
However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.
If your DTV channels are on UHF and you already get good UHF reception, your present antenna may work fine. The same holds true for
VHF DTV reception. Note that in some markets, both VHF and UHF channels are used for DTV broadcasts.
You can find out the latest DTV channel assignments for your area by browsing selected Internet web sites such as www.titantv.com,
www.10000watts.com, and www.fcc.gov.
2. How difficult is it to receive DTV signals indoors?
This depends on whether your local DTV stations are running full power or not and how close your location is to the transmission tower.
DTV receivers do not require as much signal as analog TV receivers to produce high-quality images and sound.
Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio data is decoded at the same quality it
was originally encoded for broadcast. This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio.
3. How can I connect an antenna in my townhouse, co-operative apartment, condominium, or apartment?
The Federal Communications Commission’s OTARD Rule (part of the Telecommunications Act of 1996) allows residents of
condominiums, townhouse, or members of neighborhood associations to put up outside antennas for reception of broadcast TV signals as long as those antennas are not located in common areas and are no more than 12’ in height.
Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use indoor antennas to receive DTV
broadcasts. It is possible that the landlord of an apartment complex can provide broadcast DTV signals via a master TV antenna system to each apartment.
4. Can I connect my DTV set-top receiver to my cable TV service?
Cable TV systems use a different method for transmitting digital TV programs that is currently incompatible with broadcast DTV set-top
receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.
The good news is that you won’t have to pay a monthly or per-program charge to watch OTA DTV and HDTV programs. They’re free,
unlike subscription satellite TV or premium cable TV. All you need is an antenna and a DTV set-top receiver to enjoy clear, sharp widescreen images and high-quality audio.

Contents

GENERAL INFORMATION
■ Viewing Position
■ List of Features
■ Checking Parts
■ Viewing the Control Panel
Viewing the Connection Panel ......................................8
Remote Control .............................................................9
Installing Batteries in the Remote Control ..................10
CONNECTIONS
Connecting VHF and UHF Antennas ..........................10
Connecting Cable TV .................................................. 11
Connecting a VCR ......................................................12
Connecting a Camcorder ............................................13
Connecting a DVD Player/Set-Top Box ......................13
Connecting a DVD Player/Set-Top Box via HDMI ......13
Connecting a DVD Player/Set-Top Box via DVI ..........14
Connecting a Digital Audio System .............................14
Connecting an Amplifier/DVD Home Theater .............15
Connecting a PC .........................................................15
OPERATION
Turning the TV On and Off ..........................................16
Plug & Play Feature ....................................................16
Changing Channels ....................................................17
Adjusting the Volume ..................................................18
Viewing the Display ....................................................18
Viewing the Menus .....................................................19
Memorizing the Channels ...........................................19
Setting Up Your Remote Control .................................21
To Select the Source ...................................................26
To Edit the Input Source Name ...................................26
.........................................................5
..........................................................5
...........................................................6
.......................................... 6
CHANNEL CONTROL
Clearing Scrambled Channels - Digital .......................37
Adding and Erasing Channels ....................................37
Setting Your Favorite Channels ..................................38
Viewing the Channel Lists ..........................................39
Setting the Default Channel List Mode .......................40
Labeling Channels - Analog ........................................40
Fine Tuning Analog Channels - Analog .......................41
Checking the Digital-Signal Strength - Digital .............41
LNA (Low Noise Amplifier) ..........................................42
PC DISPLAY
Using Your TV as a Computer (PC) Display ...............42
Display Modes ............................................................42
Setting up the TV with your PC ...................................43
■ Changing the Picture Size (PC Mode)
■ Setting the Home Theater PC
FUNCTION DESCRIPTION
Selecting a Menu Language .......................................46
Setting the Time ..........................................................46
Using the Game Mode ................................................48
■ Using
(On-Screen Text Messages) - Analog .........................
(On-Screen Text Messages) - Digital ..........................
■ Adjusting the Melody Sound
■ Upgrading the Software
the
3D/Dual-View Function
Using the V-Chip .........................................................49
Viewing Closed Captions
Viewing Closed Captions
Menu Transparency Level ..........................................54
Setting the Function Help ...........................................54
...............................45
..................................54
..........................................55
.................45
..........................48
52
53
PICTURE CONTROL
Using Automatic Picture Settings ................................27
■ Making Detailed Picture Settings
Changing the Screen Size ..........................................29
Digital Noise Reduction ..............................................30
DNIe (Digital Natural Image engine) ...........................30
■ Setting the Color Gamut
Selecting the Film Mode .............................................31
Setting the Blue Screen Mode ....................................32
■ Setting the HDMI Black Level
Freezing the Picture ....................................................32
SOUND CONTROL
Using Automatic Sound Settings ................................33
Customizing the Sound ...............................................33
Setting the TruSurround XT ........................................34
Choosing a Multi-Channel Sound (MTS) Track - Digital
Choosing a Multi-Channel Sound (MTS) Track - Analog
Automatic Volume Control ..........................................35
Selecting the Internal Mute .........................................36
.........................................31
..........................28
................................32
.......34
......35
English - 4
APPENDIX
Troubleshooting ..........................................................56
Replacing the Lamp ....................................................57
Cleaning and Maintaining Your TV .............................58
Using Your TV in Another Country ..............................58
Specifications ..............................................................59
Symbols
Press
Important
Note
One-Touch
Button
English - 5

General Information

Viewing Position

To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible.
When installing the product, make sure to keep it away
from the wall (more than 10cm / 4inches) for ventilation purposes.
Poor ventilation may cause an increase in the internal
temperature of the product, resulting in a shortened component life and degraded performance.

List of Features

Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features:
Easy-to-operate remote control
Easy-to-use on-screen menu system you can access from right side panel or remote control
Automatic timer to turn the TV on and off at any time you choose
Adjustable picture and sound settings and the ability to memorize your favorite settings
Automatic channel tuning for up to 181 channels
A special filter to reduce or eliminate reception problems
Fine tuning control for the sharpest picture possible
A built-in multi-channel sound decoder for stereo and bilingual listening
Built-in, dual channel speakers
A special sleep timer
Widescreen TV with adjustable image size
Life-like clear images provided by DNle technology
Color Weakness Enhancement Feature
Digital Input jack
Digital Audio Output (OPTICAL) jack
3D/Dual-View Function
Theater Game Mode

Checking Parts

Owner’s Instructions Remote Control/
AAA Batteries
Warranty Card/
Registration Card/
Safety Guide Manual/
Quick Guide Manual
Power Cord Cloth-Clean
Sold Separately
Replacement Lamp
For purchasing a replacement lamp, ask at a nearby service center.
• Use authorized lamps only. The company cannot guarantee the quality of the product if an unauthorized lamp is used.
S-Video Cable Antenna Cable
D-Sub Cable PC Audio Cable HDMI Cable HDMI/DVI Cable Optical Cable
1Stereo/2RCA
Cable
Component Cables
Audio Cables Video Cables

Viewing the Control Panel

Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.
The product color and shape may vary depending on the model.
English - 6
Continued...
English - 7
1
SOURCE
Toggles between all the available input sources (TV, AV1, AV2, S-Video1, S-Video2, Component1, Component2, PC, HDMI1, or HDMI2).
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+ VOL –
Press to increase or decrease the volume. In the on-screen menu, use the + VOL – buttons as you would use the ◄ and ► buttons on the remote control.
4
CH
5
(ENTER)
Press to confirm a selection.
6
POWER
Press to turn the TV on and off.
7
Remote Control Sensor
Aim the remote control towards this spot on the TV.
8
Indicator Lights
Blinks and turns off when the power is on and lights up in stand-by mode.
Press to change channels. In the on-screen menu, use the CH buttons as you would use the ▲ and ▼ buttons on the remote control.
Indicator Light Key
( : On, : Blinking, : Off)
STAND BY/TEMP
◆ It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
◆ The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
◆ You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model.
◆ When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the ▲/▼/◄/► buttons on the remote control.
◆ If the remote control no longer works or you have lost it, you can use controls on the panel of the TV.
TIMER LAMP Indication
Standby state. The picture will automatically appear in about 15 seconds. Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds. A cooling fan inside the set is not operating normally. Lamp cover on the side of the set is not properly shut.
Check if the ventilation hole on the side of the set is blocked, because if the inner temperature is too high, the power will shut off.
Lamp may be defective. Please contact a certified technician.

Viewing the Connection Panel

Right Side Panel Jacks
Use the side panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 12-15.
The product color and shape may vary depending on the model.
1
ANT 1 IN(CABLE)/ANT 2 IN(AIR)
75Ω Coaxial connector for Air/Cable Network.
2
VIDEO/AUDIO-L/R (AV IN 1, 2)
Video input for external devices, such as a Camcorder or
VCR.
3
S-VIDEO (AV IN 1, 2)
Video input for external devices with an S-Video output, such as a Camcorder or VCR.
4
VIDEO/AUDIO OUT (L/R)
Video/Audio outputs for external devices.
Video output is not avaiable RF(Digital)/Component/PC/HDMI.
5
COMPONENT IN 1, 2
Video (Y/P
6
3D SYNC OUT
Connect to 3D IR Emitter.
7
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
8
DVI IN (AUDIO-L/R)
Connect to the DVI audio output jack of an external device.
9
PC IN
Connect to the video output jack on your PC.
B/PR) and audio (L-AUDIO-R) Component inputs.
0
PC AUDIO IN
Connect to the audio output jack on your PC.
!
SERVICE 2
This jack is for software upgrade.
@
SERVICE
This jack is for service only.
#
HDMI 1/DVI IN
Connect to the HDMI jack of a device with HDMI output. This input can also be used as a DVI connection with separate
analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection.
When using an optional HDMI/DVI adapter, the DVI analog
audio inputs on your TV allow you to receive left and right audio from your DVI device.
$
HDMI IN 2
Connect to the HDMI jack of a device with HDMI output.
(Not compatible with PC)
%
POWER IN
Connect the supplied power cord.
English - 8
English - 9

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD Player, or Set-Top Box.
1
POWER
Turns the TV on and off.
2
Numeric Buttons
Press to directly select a channel.
3
Press to select additional channels being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”.
4
CH LIST
Used to display Channel Lists on the screen.
5
ANTENNA
Press to select “Air” or “Cable”.
6
VOL +, VOL –
Press to increase or decrease the volume.
7
MUTE
Press to temporarily cut off the sound.
8
MENU
Displays the main on-screen menu.
9
RETURN
Returns to the previous menu.
0
S.MODE
Press to select the sound mode.
!
P.MODE
Press to select the picture mode.
@
SLEEP
Press to select a preset time interval for automatic shut off.
#
GAME
Press to select various Game settings.
$
MTS
Press to choose Stereo, Mono or Separate Audio Program (SAP broadcast).
%
3D
Press to select the 3D/Dual-View mode.
^
SET
Sets the remote to control your TV, VCR, Cable, DVD, or Set-Top Box.
&
TV, DVD, STB, CABLE, VCR
Press to operate your TV, DVD, STB, CABLE (box), or VCR.
*
SOURCE
Press to display all of the available video sources.
(
Press to backlight the VOL, CH, and the active source button (TV, DVD, CABLE, STB, VCR) on the remote control.
)
PRE-CH
Tunes to the previous channel.
a
FAV.CH
Press to switch to your favorite channels.
b
HDMI
Selects the HDMI mode directly.
c
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast Forward
d
CH , CH
Press to change channels.
e
EXIT
Press to exit from the menu.
f
UP▲/DOWN▼/LEFT◄/RIGHT►/
ENTER
Use to select on-screen menu items and change menu values.
g
INFO
Press to display information on the TV screen.
h
CAPTION
Controls the caption decoder.
i
STILL
Press to stop the action during a particular scene. Press again to resume normal video.
j
Color buttons
Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu. (Refer to pages 37~39)
k
P.SIZE
Press to change the screen size.
l
ADD/DEL
Use to store and delete channels to/ from memory.
m
SRS
Selects SRS TruSurround XT mode.
n
RESET
When your remote control does not work, change the batteries and press the RESET button for 2-3 seconds before use.
This is a special remote control for the visually impaired person, and has Braille
points on the POWER, Channel, Volume, STOP, and PLAY/PAUSE buttons.
The performance of the remote control may be affected by bright light.

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
compartment.
Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.
Remove the batteries and store them in a cool and dry place if you won’t be using the remote
control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat Twin Leads” below.
If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round Leads”. If you have two antennas, see “Separate VHF and UHF Antennas”.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ω twin flat leads, follow the directions below.
1 Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).
Use a screwdriver to tighten the screws.
2 Plug the adaptor into the ANT 1 IN(CABLE) or ANT 2 IN(AIR) terminal on the side of the TV.
Antennas with 75 Ω Round Leads
1
Plug the antenna lead into the ANT 1 IN(CABLE) or ANT 2 IN(AIR) terminal on the side of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1 Connect both antenna leads to the combiner.
2 Plug the combiner into the ANT 1 IN(CABLE) or ANT 2 IN(AIR) terminal on the bottom of the side
panel.
English - 10
English - 11

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1 Plug the incoming cable into the ANT 1 IN(CABLE) terminal on the side of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1 Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
2 Connect the other end of this cable to the ANT 1 IN(CABLE) terminal on the side of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels(such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)
1 Find and disconnect the cable that is connected
to the ANT IN terminal on your cable box. This terminal might be labeled “ANT IN”, “VHF IN”
or simply, “IN”.
ANT IN
ANT IN
ANT OUT
2 Connect this cable to a two-way splitter.
3 Connect an Antenna cable between an OUTPUT
terminal on the splitter and the IN terminal on the cable box.
4 Connect an Antenna cable between the ANT OUT
terminal on the cable box and the B-IN terminal on the RF (A/B) switch.
5 Connect another cable between the other OUT
terminal on the splitter and the A-IN terminal on the RF (A/B) switch.
6 Connect the last Antenna cable between the OUT
terminal on the RF (A/B) switch and the ANT IN 1 (CABLE) terminal on the side of the TV.
After you have made this connection, set the
A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
Incoming
cable
Incoming
cable
Incoming
Incoming
cable
cable
Splitter
Splitter
Splitter
Incoming
cable
Splitter
Cable Box
Cable Box
Cable Box
Splitter
RF (A/B)
Switch
Cable Box
TV Side
RF (A/B)
Switch
RF (A/B)
Switch

Connecting a VCR

Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system.
1 Unplug the cable or antenna from
the side of the TV
2 Connect the cable or antenna to the
ANT IN terminal on the back of the VCR.
3 Connect an Antenna Cable
between the ANT OUT terminal on the VCR and the ANT 1 IN(CABLE) or ANT 2 IN(AIR) terminal on the TV.
4 Connect a Video Cable between
the VIDEO OUT jack on the VCR and the AV IN 1 [VIDEO] (or AV IN 2 [VIDEO]) jack on the TV.
5 Connect Audio Cables between the
AUDIO OUT jacks on the VCR and the AV IN 1 [L-AUDIO-R] (or AV IN 2 L-AUDIO-R) jacks on the TV.
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
VCR
2
Each VCR has a different side panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
Audio Cable(Not supplied)5
Video Cable(Not supplied)4
Antenna cable(Not supplied)3
TV Side Panel
S-Video Connection
Your Samsung TV can be connected to the S-Video jack of a VCR. (This connection delivers a better picture when compared to the regular Video connection above.)
1 To begin, follow steps 1–3 in the
previous section to connect the antenna or cable to your VCR and your TV.
2 Connect an S-Video Cable between
the S-VIDEO OUT jack on the VCR and the AV IN 1 [S-VIDEO] (or AV IN 2 [S-VIDEO]) jack on the TV.
3 Connect Audio Cables between the
AUDIO OUT jacks on the VCR and the AV IN 1 [L-AUDIO-R] (or AV IN 2 [L-AUDIO-R]) jacks on the TV.
➢ ➢ ➢
VCR
Audio Cable
5
(Not supplied)
S-Video Cable(Not supplied)4
Antenna cable(Not supplied)3
Each S-VHS VCR has a different side panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. Some games may be displayed with a cut off picture when the TV is connected to a
game player.
TV Side Panel
English - 12
English - 13

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR.
1 Connect a Video Cable or S-Video
Cable between the AV IN 1 [VIDEO] or [S-Video] (or AV IN 2 [VIDEO] or [S-VIDEO]) jack on the TV and the VIDEO OUT jack on the camcorder.
2 Connect Audio Cables between the
AV IN 1 [L-AUDIO-R] (or AV IN 2 [L-AUDIO-R]) jacks on the TV
Camcorder
S-Video Cable(Not supplied)
1
or
1
Video Cable(Not supplied)
Audio Cable(Not supplied)
2
and the AUDIO OUT jacks on the camcorder.
Each Camcorder has a different side panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.

Connecting a DVD Player/Set-Top Box

The side panel jacks on your TV make it easy to connect a DVD Player/Set-Top Box.
1 Connect Component Cables
between the COMPONENT IN 1 [Y, P
B, PR] (or COMPONENT IN 2
[Y, P
B, PR]) jacks on the TV and the
COMPONENT OUT [Y, P
B, PR] jacks
on the DVD Player/Set-Top Box.
2 Connect Audio Cables between the
COMPONENT IN 1 [L-AUDIO-R] (or COMPONENT IN 2 [L-AUDIO-R]) jacks on the TV and the AUDIO OUT jacks on the DVD Player/ Set-Top Box.
DVD Player/Set-Top Box
2
Audio Cable(Not supplied)
TV Side Panel
TV Side Panel
Component Cable(Not supplied)
1
Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.
Each DVD Player/Set-Top box has a different side panel configuration.
When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture.
1.
Connect an HDMI Cable between
the
HDMI IN 2
HDMI OUT on the DVD Player/
on the TV and the
Set-Top Box.
What is HDMI?
● HDMI, or high-definition multimedia interface, is a interface that enables the transmission of digital audio and video signals using a single cable.
● “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio.
Each DVD Player/Set-Top box has a different side panel configuration.
When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.
When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio cables when connecting via HDMI/DVI.
DVD Player / Set-Top Box
1
HDMI Cable (Not supplied)
TV Side Panel

Connecting a DVD Player/Set-Top Box via DVI

This connection can only be made if there is a DVI Output jack on the external device.
1 Connect a HDMI/DVI Cable or
DVI-HDMI Adapter between the HDMI 1/DVI IN jack on the TV and the DVI jack on the DVD Player/ Set-Top Box.
2 Connect Audio Cables between the
DVI IN [L-AUDIO-R] jack on the TV and the AUDIO OUT jacks on the DVD Player/Set-Top Box.
DVD Player/Set-Top Box
2
Audio Cable(Not supplied)
HDMI/DVI Cable(Not supplied)
1
Each DVD Player/Set-Top box has a different side panel configuration.
When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must connect to the HDMI 1/DVI IN terminal on the TV.
TV Side Panel

Connecting a Digital Audio System

The side panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
Each Digital Audio System has a different side panel configuration.
1 Connect an Optical Cable between
the DIGITAL AUDIO OUT (OPTICAL) jack on the TV and the Digital Audio Input jack on the Digital Audio System. When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) terminal: Decrease the gain (volume) of the TV, and adjust the volume level with the system’s volume control.
5.1CH audio is possible when the TV
is connected to an external device supporting 5.1CH.
What is OPTICAL?
Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of digital
audio in the form of a light wave that uses a glass conductor.
Digital Audio System
1
Optical Cable (Not supplied)
TV Side Panel
English - 14
English - 15

Connecting an Amplifier/DVD Home Theater

1 Connect Audio Cables between the
AUDIO OUT [L-AUDIO-R] on the TV and AUDIO IN [L-AUDIO-R] on the Amplifier/DVD Home Theater.
When an audio amplifier is
connected to the “AUDIO OUT [L-AUDIO-R ]” terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier’s volume control.
AV OUT L-AUDIO-R RF (Digital/Analog), AV, S-Video, Component, HDMI Sound is output
DIGITAL AUDIO OUT (OPTICAL)
If you want to play movies by connecting DVD Player or Set-Top Box to the COMPONENT IN jacks on the TV,
connect the Optical OUT jack on the DVD Player or Set-Top Box to an Amplifier or DVD Home Theater.
Amplifier/ DVD Home Theater
1
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different side panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
RF (Digital/Analog), AV, S-Video, Component
Sound is output
HDMI Sound is not output
TV Side Panel

Connecting a PC

Using the D-Sub Cable
1 Connect a D-Sub Cable between the
PC IN [PC] jack on the TV and the PC output jack on your computer.
2 Connect a PC Audio Cable between
the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Using the HDMI/DVI Cable
1 Connect a HDMI/DVI Cable between
the HDMI1 jack on the TV and the PC output jack on your computer.
2 Connect a 1Stereo/2RCA Cable
between the DVI IN jack on the TV and the Audio Out jack of the sound card on your computer.
Using the D-Sub Cable
PC
2
PC Audio Cable (Not supplied)
1
D-Sub Cable (Not supplied)
Using the HDMI/DVI Cable
PC
2
1Stereo/2RCA Cable (Not supplied)
1
HDMI/DVI Cable (Not supplied)
TV Side Panel
TV Side Panel
Each PC has a different side panel configuration.
When connecting a PC, match the color of the connection terminal to the cable.

Operation

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the (Power) button on the front panel.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently:
1 Press the
The message Menu language, Shop Mode, Channels and Time will be set. is displayed.
2 Press the
Press the ▲ or ▼ button to select language, then press the The message displayed.
3 Press the ◄ or ► button to select
➢ ➢
➢ ➢
4
Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the
➢ ➢
5 The TV will begin memorizing all of the available channels. After all the available channels
are stored, the Auto program menu reappears. Press the automatically displayed.
6 Press the
Press the ▲ or ▼ button to select the
7
Press the ◄ or ► button to move to Set the date and time you want by pressing the ▲ or ▼ button, then press the button.
8
The message When you have finished, press the
POWER
button on the remote control.
ENTER
button to enter the language.
Select Home Mode when installing this TV at home.
Shop
The default selection is We recommend setting the TV to Home mode for the best picture in your home
environment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home)
mode, press the Volume button and then hold down the
Home
.
or
Home
, then press the
ENTER
button.
is automatically
ENTER
button.
MENU
button for five seconds
on the TV panel.
ENTER
button to select
If the antenna is connected to ANT 1 IN(CABLE), select ANT 2 IN(AIR), select
If both ANT 1 IN(CABLE) and ANT 2 IN(AIR) are connected, select the In Cable mode, you can select the correct signal source among
by pressing the ◄ button, then press the ▲ or ▼ button. Press the ► button to select
Air
Start
.
Start
.
, then press the
Cable
ENTER
and if it is connected to
Air + Cable
STD
, HRC
, and IRC
button.
.
Contact your local cable company to identify the type of cable system that exists in your particular area.
ENTER
button when channel memorization is complete.
To stop the search before it has finished, press the
ENTER
button.
ENTER
Clock Mode
menu is
button with stop selected.
Manual for setting the current time manually, then press
ENTER button. The message
If you select (If you want to set the time automatically, skip to step 9.)
You can set the buttons on the remote control.
Auto, Set to daylight saving time.
Month
Enjoy your watching.
Even if the after several seconds.
ENTER
button is not pressed, the message will automatically disappear
Enter the current date and time.
is displayed, then go to step
Month
, Day
, Year
, Hour
, Day
, Year
, Hour
, and Minute
is displayed.
ENTER
button.
is displayed.
9.
, Minute
, or am/pm
.
ENTER
directly by pressing the number
Menu language, Shop Mode, Channels and Time will be set.
Start
Plug & Play
Plug & Play
Select the language of the OSD.
Language
Move
Select Home Mode when installing this TV at home.
Shop
Move
Selects the antennas to memorize.
Air Cable
Air + Cable
Move
Selects a cable signal type for your location.
Analog
STD HRC IRC
Digital
STD HRC IRC
Auto Program in Progress.
Sets the current time manually or automatically.
Clock Mode
Move
Enter the current date and time.
Month Day Year
--
Hour Minute am/pm
--
Adjust
Enjoy your watching.
Plug & Play
Plug & Play
Plug & Play
Plug & Play
Move
Plug & Play
Stop
Plug & Play
Manual
Auto
Plug & Play
--
--
Move
English
Español Français
Enter
Home
Enter
St art St art St art
Enter
Enter
Enter
Enter
--- -
--
Enter
St art
Air 16 15%
Skip
Skip
Skip
Skip
Skip
Skip
Skip
English - 16
Continued...
OK
English - 17
Setting the Clock Automatically
9 Press the ENTER button.
Press the ▲ or ▼ button to select Off or On, then the ENTER button. The message Select the time zone where you are located. is automatically displayed.
Plug & Play
Set to daylight saving time.
DST
Off
On
10 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the
highlight to the appropriate time zone on the map of the United States). Press the ENTER button. If clock is not automatically set, see pages 46 to set the clock.
11 The message
Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.
If you want to reset this feature...
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ENTER button to select Plug & Play.
For further details on setting up options, refer to the top the page 16~17.
The Plug & Play feature is only available in the TV and DTV mode.
Move
Select the time zone where you are located.
Newfoundland
Atlantic Eastern Central
Mountain
Pacific Alaska Hawaii
Move
Enjoy your watching.
Plug & Play Language : English Time
Game Mode : Off
DLP® 3D/Dual-View : V-Chip Caption
More
Menu language, Shop Mode, Channels and Time will be set.
Enter
Plug & Play
Enter
OK
Setup
Move Enter
Start
ON-STD GLS ►
Return
Skip
Skip
► ► ►
► ►

Changing Channels

Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 19 to memorize channels.
Using the Number Buttons
Use the number buttons to quickly tune to any channel. Press the number buttons to go directly to a channel.
For example, to select channel 27, press 2, then 7. The TV will change channels when you press the second number.
Continued...
Using the “-” Button
The - button is used to select stations that broadcast a digital signal. For example, for Channel 7-1, press 7, then -, and then 1.
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the ENTER button.
Using the PRE-CH Button to select the Previous Channel
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the alternate between them.
PRE-CH button to quickly

Adjusting the Volume

Press the VOL +
or VOL –
button to increase or decrease the volume.
Using the MUTE Button
At any time, you can cut off the sound using the 1 Press the
The word
2 To turn mute off, press the
MUTE button and the sound cuts off.
Mute
will appear in the lower-left corner of the screen.
MUTE
button again, or simply press the VOL +
MUTE
button.
or VOL –
button.

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.
Press the The TV will display the channel, the type of sound, and the status of certain picture and sound settings.
INFO
button on the remote control.
Press the automatically.
INFO
button once more or wait approximately 10 seconds and it disappears
Air 28
Mono
Picture Mode : Dynamic Sound Mode : Custom MTS : Mono Caption : Off V-Chip : Off 12 : 00 am
English - 18
English - 19

Viewing the Menus

1 With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons: Picture, Sound, Channel, Setup, Input.
Source List : TV Edit Name
Input
► ►
2 Use the ▲ or ▼ button to select one of the five icons.
Then press the ENTER button to access the icon’s sub-menu.
3 Press the EXIT button to exit.
It takes about one minute until the on-screen menu disappears.
Move
Enter
Exit

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. After the available channels are memorized, use the CH channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV(i.e. an air or a cable system).
1
Press the Press the ▲ or ▼ button to select
2
Press the Press the ▲ or ▼ button to select Press the
MENU
button to display the menu.
ENTER
button select
MENU
button.
and CH
Channel
Antenna
Air
or Cable
button to scan through the channels. This eliminates the need to change
, then press the
.
, then press the
ENTER
ENTER
button.
button.
Channel
Antenna : Air Auto Program
Clear Scrambled Channel
Channel List
Name Fine Tune
Signal Strength LNA : On
Move
Enter
Move
Channel
Enter
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Name Fine Tune
Signal Strength LNA : On
Air
Cable
Return
Return
► ►
► ►
► ►
Storing Channels in Memory (Automatic Method)
1
Press the Press the ▲ or ▼ button to select
2
Press the ▲ or ▼ button to select
3
Press the ▲ or ▼ button to select the antenna connection, then press the
➢ ➢
MENU
button to display the menu.
Channel Auto Program
Air
: “Air” antenna signal.
Cable
: “Cable” antenna signal.
Air+Cable
If the antenna is connected to ANT 1 IN(CABLE), select ANT 2 IN(AIR), select
If both ANT 1 IN and ANT 2 IN are connected, select the If you selected
: “Air” and “Cable” antenna signals.
Air
Air
.
, then go to step
, then press the
, then press the
5.
ENTER
button.
ENTER
Cable
and if it is connected to
Air + Cable
button.
ENTER
.
button.
Continued
Channel
Antenna : Air Auto Program
Clear Scrambled Channel
Channel List
Name Fine Tune
Signal Strength LNA : On
Move
Enter
Auto Program
Selects the antennas to memorize.
Air Cable Air + Cable
Move
Enter
St art St art
St art
Return
Return
► ►
► ►
► ►
...
4 Press the ▲ or ▼ button to select Analog or Digital, then press the ENTER button.
You can select the correct signal source among
STD, HRC and IRC by pressing the
▲ or ▼ button, then press the ENTER button. To memorize the channels, press the ▲ or ▼ button to select
Start, then press the
ENTER button.
If you have Digital cable TV, select the signal source for both Analog and Digital.
STD, HRC, and IRC identify various types of cable TV systems. Contact your local
cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
5 The TV begins memorizing all available stations.
When pressing the ENTER button during a storing process, the Stop Auto Program? message will be displayed. Select Yes by pressing the ◄ or ► button. Press the EXIT button to exit.
The TV must be connected to an antenna/cable in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.
• All available DTV and analog channels are automatically stored in memory.
• It takes approximately 3 to 10 minutes to memorize channels.
Auto Program
Selects a cable signal type for your location.
Analog
STD HRC IRC
Digital
STD HRC IRC
Auto Program
Auto Program in Progress.
Auto Program
Stop Auto Program?
Yes No
Move
Move
Enter
Stop
Enter
Enter
St art
Air 16 15%
15%
Return
Return
Return
English - 20
English - 21

Setting Up Your Remote Control

After your remote control has been properly set up, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR 1 Turn off your VCR. 2 Press the VCR button on your TV’s remote control. 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the VCR code listed
on page 23 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control. Your VCR should turn on if your remote
is set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR When your remote control is in VCR mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your Cable Box 1 Turn off your cable box. 2 Press the CABLE button on your TV’s remote control. 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the cable box code
listed on page 24 of this manual for your brand of cable box. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through
046.
Note on Using Remote Control Modes: Cable Box When your remote control is in CABLE mode, the volume buttons still control your TV’s volume.
Continued...
Setting Up the Remote to Operate Your DVD 1 Turn off your DVD. 2 Press the DVD button on your TV’s remote control. 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the DVD code listed
on page 25 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of DVD. If no other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD When your remote control is in DVD mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your Set Top Box 1 Turn off your STB. 2 Press the STB button on your TV’s remote control. 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the STB code listed
on page 24 of this manual for your brand of STB. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of STB. If no other codes are listed, try each code, 000 through 074.
Note on Using Remote Control Modes: STB When your remote control is in STB mode, the volume buttons still control your TV’s volume.
Continued...
English - 22
English - 23
Remote Control Codes
VCR
Brand
SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON
FISHER FUNAI GENERAL ELECTRIC GO VIDEO LG(Goldstar) HARMAN KARDON HITACHI INSTANT REPLAY JC PENNEY
JCL KENWOOD KLH LIOYD LOGIK LXI JVC MAGNAVOX MARANTZ MARTA KONIA ORION MEI MEMOREX MGA MIDLAND MINOLTA
Code
000 001 002 003 004 005 077 078 079 020 025 004 027 032 007 026 018 022 002 003 006 008 015 055 021 056 002 003 006 008 015 055 007 002 024 002 007 008 017 021 025 056 064 066 003 010 011 012 013 014 015 016 007 026 017 025 034 001 003 006 021 022 025 030 032 034 040 047 050 052 060 063 065 066 067 069 073 018 024 028 029 048 051 061 025 002 005 017 021 056 002 006 007 008 009 010 007 019 025 041 042 074 021 002 007 018 019 021 026 037 041 054 056 007 008 018 021 026 037 007 008 018 026 037 070 025 038 025 081 082 083 021 056 059 007 008 018 021 026 037 062 006 036 073 074 075 076 021 006 021 024 025 034 005 019 041 075
Brand
MITSUBISHI MONTGOMERY WARD MTC MULTITECH NEC OPTIMUS PANASONIC PENTAX PENTEX RESEARCH+ PHILCO PHILIPS PIONEER PORTLAND PROSCAN QUARTZ QUASAR RADIO SHACK/ REALISTIC RCA
SANSUI SANYO SCOTT SEARS SHARP SHIMTOM SIGNATURE SONY SYLVANIA SYMPHONIC TANDY TASHIKA TATUNG TEAC TECHNICS TEKNIKA TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS
YAMAHA ZENITH
Code
019 034 041 046 020 002 025 002 005 025 038 007 008 018 026 037 062 064 020 021 056 071 072 019 041 075 008 021 056 059 021 080 019 026 039 053 015 049 055 017 018 021 056 006 018 020 021 024 025 029 034 048 056 002 017 019 021 035 041 043 057 068 076 026 018 024 003 047 052 067 006 018 019 024 028 029 041 048 051 020 034 045 015 027 033 038 058 025 027 033 044 021 025 056 059 025 018 025 006 037 025 037 068 021 006 021 025 031 066 003 019 029 051 052 002 006 002 007 026 026 007 026 002 002 003 006 019 020 021 024 025 034 038 041 007 008 018 026 037 023 027 033
Continued...
CABLE BOX
Brand
SAMSUNG GI HAMLIN HITACHI JERROLD MACOM MAGNAVOX OAK PANASONIC PHILIPS PIONEER RCA REGAL
Code
000 001 002 003 004 005 006 007 041 003 024 031 025 030 038 039 025 030 019 023 028 026 003 022 027 037 044 019 021 023 028 004 018 020 044 014 022 040 003
SAMSUNG SET-TOP BOX
Product
Ground wave STB Satellite STB CABLE STB STB DVD COMBO Satellite STB HDD COMBO Standard
SET-TOP BOX
Brand
ALPHASTAR ANAM CHANNEL MASTER CROSSDIGITAL CHAPARRAL DIRECT TV
DAEWOO DISH NETWORK SYSTEM DISHPRO DRAKE DX ANTENNA ECHOSTAR EXPRESSVU GOI GE GENERAL INSTRUMENT HTS HOME CABLE HITACHI HUGHES NETWORK IQ IQ PRISM JANEIL JERROID JVC
Code
023 043 018 034 019 035 015 016 017 019 022 045 060 061 062 065 066 067 068 074 069 070 069 018 024 032 027 025 069 070 071 069 069 065 046 047 048 063 064 069 056 022 015 017 020 020 059 063 069 070
Code
001 002 003 004 008 009
Brand
REGENCY SA SCIENTIFIC ATLAN SPRUCER STARGATE 2000 SYLVANIA TEXSCAN TOCOM UNIVERSAL VIEWSTAR WARNER AMEX ZENITH
Product
Satellite STB HDD COMBO Premium CABLE STB HDD COMBO Standard CABLE STB HDD COMBO Premium Ground wave STB HDD COMBO Standard Ground wave STB HDD COMBO Premium
Brand
LG(Goldstar) MAGNAVOX MEMOREX MOTOROLA MACOM MITSUBISHI NEXT LEVEL PHILIPS
PRIMESTAR PANASONIC PAYSAT PROSCAN RCA RADIOSHACK REALISTIC STS STAR TRAK SKY SKY LIFE SHACK STAR CHOICE SONY TOSHIBA ULTIMATE TV UNIDEN ZENITH
Code
015 023 042 043 042 043 022 036 016 016 032 033 034 019 021 023 028 046 017 029 035 037 045
Code
010 011 012 013 014
Code
044 073 016 021 036 038 039 040 041 042 016 064 018 015 047 048 064 015 016 017 021 033 036 038 039 040 041 042 067 046 049 050 063 058 059 061 062 016 065 066 051 052 053 065 066 064 057 020 027 026 031 005 006 007 064 064 054 060 015 017 028 029 030 072 060 066 016 021 037 055 056 057 024 031 068
English - 24
Continued...
English - 25
SAMSUNG DVD
Product
DVD DVDR BD Record VCR COMBO VCR Record DHR COMBO
DVD
Brand
ANAM AUDIOVOX AUDIOLOGIC ANABA APEX DIGITAL
AIWA BROKSONIC BLAUPUNKT B&K CURTIS MATHES CYBER HOME CLARION CIRRUS CINEVISION DAEWOO DENON FARENHEIT FISHER GPX GO VIDEO GE GREENHILL HITACHI HITEKER HOYO HARMAN / KARDON IRT INTEGRA JBL JVC JATON KENWOOD KISS KONKA KLH LG(Goldstar) LOEWE LASONIC MOBILE AUTHORITY MEMOREX MALATA MAGNAVOX MINTEK MONYKA
Code
000 001 002 003 004 005 006 007 008 009 010 011 012 013
Code
030 075 085 072 070 071 074 086 083 084 088 111 112 114 062 074 122 123 027 065 077 078 079 082 080 125 081 095 066 146 067 068 090 060 061 089 133 135 069 074 074 064 113 071 073 091 110 089 092 091 022 033 115 116 073 051 108 109 073 059 100 106 107 074 075 025 031 057 058 054 055 056 076 093 074 094 073
Product
Home Theater VCR COMBO HDD Record COMBO TWIN TRAY COMBO STB DVD COMBO DVD Receiver AV Receiver
Brand
NORCENT NEXT BASE NEC NANTAUS NESA OPTOMEDIA ELECTRONICS OPTIVIEW ONKYO PHILCO PRINCETON PROSCAN PANASONIC PHILIPS ROTEL RIO RCA RAITE ROWA SAMPO SONY
SHERWOOD SVA SYLVANIA SHARP SANSUI SANYO SHINSONIC SANYO THOMSON TOSHIBA TECHNICS TVIEW TOKAI TEAC TECHWOOD TREDEX URBAN CONCEPTS VENTURER VOCOPRO YAMAHA YAMAKAWA XWAVE ZENITH
Code
014 015 016 017 018 019 020 021
Code
048 049 050 052 053 144 074 105 072 076 092 119 044 045 046 047 023 024 034 124 134 136 137 138 036 076 117 118 120 023 035 074 075 131 132 073 038 104 026 029 126 127 128 129 130 141 039 041 042 043 093 140 062 062 094 090 145 028 062 076 139 072 073 096 097 098 099 101 076 075 102 032 063 040 073 103 076 121

To Select the Source

Use to select TV or other external input sources connected to the TV. Use to select the input source of your choice such as DVD players, VCRs, etc.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
2 Press the ENTER button to select Source List.
Press the ▲ or ▼ button to select signal source, then press the ENTER button.
You can choose between the following sets of jacks: TV, AV1, AV2, S-Video1, S-Video2, Component1, Component2, PC, HDMI1, or HDMI2 on the TV’s side panel.
HDMI1 or HDMI2 input can only be selected when the external device is turned on and connected via HDMI.
You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
Press the INFO button on the remote control to see the current input source.

To Edit the Input Source Name

Name the device connected to the input jacks to make your input source selection easier.
Input
Source List : TV Edit Name
Enter
Move
Source List
TV
AV1 : - - - ­AV2 : - - - ­S-Video1 : - - - ­S-Video2 : - - - ­Component1 : - - - ­Component2 : - - - ­ More
Enter
Move
Return
Return
► ►
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button. Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.
2 Press the ▲ or ▼ button to select AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, or HDMI2 input jack, then press the ENTER button.
3 Press the ▲ or ▼ button to select VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB,
PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DVD HDD Receiver, PC, Internet TV Recv., Interactive TV Recv., VOD STB, or TV input
source, then press the ENTER button.
Press the
EXIT button to exit.
Input
Source List : TV Edit Name
Move Enter
Edit Name
AV1 : - - - ­AV2 : - - - ­S-Video1 : - - - ­S-Video2 : - - - ­Component1 : - - - ­Component2 : - - - ­PC : - - - ­ More
Move Enter
Edit Name
Move
---­VCR DVD D-VHS Cable STB HD STB Satellite STB
Enter
AV1
AV2 S-Video1 S-Video2 Component1 Component2 PC More
► ►
Return
► ► ► ► ► ► ►
Return
Return
English - 26
English - 27

Picture Control

Using Automatic Picture Settings

Your TV has three automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset at the factory. You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select the Dynamic, Standard, or Movie picture setting, then press the ENTER button.
• Choose Dynamic to increase the clarity and sharpness of the picture.
• Choose Standard for general TV watching mode.
• Choose Movie when watching movies.
Press the P.MODE button on the remote control to select one of the standard picture settings.
3 Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color, or
Tint
, then press the ENTER button.
4 Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Sharpness doesn’t operate in PC mode.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to
Contrast, Brightness, Sharpness, Color, or
Tint, OSD color will also be adjusted accordingly.
Picture
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G50 R50 Color Tone : Cool1 More
Move Enter
Picture
Mode : Dynamic
Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G50 R50 Color Tone : Cool1 More
Move Enter
Picture
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G50 R50 Color Tone : Cool1 More
Move Enter
Contrast 100
Move Adjust
Return
Dynamic
Standard Movie
Return
Return
Return
5 Press the ENTER button to return to Picture. 6 Press the ▲ or ▼ button to select Color Tone, then press the ENTER button.
Continued...
Picture
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G50 R50 Color Tone : Cool1 More
Move Enter
Return
7 Press the ▲ or ▼ button to select Cool2, Cool1, Normal, Warm1, or Warm2, then press
the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot
be selected.
Resetting the Picture Settings to the Factory Defaults 8 Press the ▲ or ▼ button to select Reset, then press the ENTER button.
Press the ▲ or ▼ button to select OK, then press the ENTER button. Press the EXIT button to exit.
Each picture mode can be reset.

Making Detailed Picture Settings

You can set detailed picture settings.
Picture
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R50
Color Tone : Cool1
More
Move Enter
More Detailed Settings Size : 16:9 Digital NR : Low DNIe : On Color Gamut : Normal
Reset : OK
Move Enter
Move Enter Return
Picture
Cool2
Cool1
Normal
Warm1 Warm2
OK
Cancel
Return
Return
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ▲ or ▼ button to select Detailed Settings, then press the ENTER button. 3 Select the desired Detailed Settings option by pressing the ▲ or ▼ button, then press the
ENTER button.
4 When you are satisfied with your setting, press the ENTER button.
Press the EXIT button to exit.
When the picture mode is set to Movie or Standard, Detailed Settings can be selected.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ 3
You can adjust the Primary Color Intensity.
Press the ◄ or ► button until you reach the optimal setting.
White Balance: -10 ~ 10
You can adjust the screen contrast so that the optimal contrast is provided.
Press the ◄ or ► button until you reach the optimal setting.
Gamma -3
Picture
More Detailed Settings Size : 16:9 Digital NR : Low DNIe : On Color Gamut : Normal Reset : OK
Move Enter
Move Enter Return
Detailed Settings
Black Adjust : Off
Dynamic Contrast Gamma -3 White Balance
Black Adjust : Off
Dynamic Contrast
Gamma -3 White Balance
: Off
-10
Move Enter
Detailed Settings
: Off
-10
Move
Adjust
Enter
Off
Low Medium High
Off
Low Medium High
Return
Return
Return
Return
► ► ► ► ► ►
English - 28
White Balance
-10
Adjust
Return
English - 29

Changing the Screen Size

You can select the picture size which best corresponds to your viewing requirements.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ▲ or ▼ button to select Size, then press the ENTER button.
3 Press the ▲ or ▼ button to select the screen format you want.
Press the ENTER button. Press the EXIT button to exit.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1 : Magnifies the size of the picture on the screen.
Zoom2 : Expands the Zoom1 format picture.
Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
4:3 : Sets the picture to 4:3 normal mode.
Press the P.SIZE button on the remote control to change the picture size.
16:9
Sets the picture to 16:9 wide mode.
Zoom1
The screen size when Wide screen is vertically enlarged.
Zoom2
The screen size when the Zoom1 screen is vertically enlarged.
Picture
More Detailed Settings Size : 16:9 Digital NR : Low DNIe : On Color Gamut : Normal Reset : OK
Move
Enter
Move
Enter Return
Size
16:9
Zoom1
Zoom2
Wide Fit
4:3
Move
Po sit on
Adjust
Return
Re set
Return
► ► ► ► ► ►
Wide Fit
Enlarges the aspect ratio of the picture to fit the
4:3
Sets the picture to 4:3 normal mode.
entire screen.
• In DTV (720p,1080i), Component (720p,1080i) or HDMI (720p,1080i) mode, any of 16:9, 4:3 and Wide Fit can be selected.
• In Analog TV, AV, S-VIDEO, Component (480i, 480p), HDMI (480i, 480p), or DTV (480i, 480p) mode, any of 16:9, Zoom1, Zoom2, and 4:3 can be selected.
• In Zoom1, Zoom2 and Wide Fit modes, you can move the picture on the screen by pressing the ▲ or ▼ button.
• When watching an HD(High Definition 720p,1080i) signal, you can use Wide Fit. Wide Fit sets the optimum picture format by expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9.

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ▲ or ▼ button to select Digital NR, then press the ENTER button.
3 Press the ▲ or ▼ button to select Off, Low, Mediunm, High, or Auto, then press the
ENTER button. Press the EXIT button to exit.
The Digital NR function is available in all modes except PC.
More Detailed Settings Size : 16:9 Digital NR : Low DNIe : On Color Gamut : Normal Reset : OK
More Detailed Settings Size : 16:9
Digital NR : Low
DNIe : On Color Gamut : Normal Reset
Picture
Move Enter
Move Enter Return
Picture
Move Enter
Move Enter Return
Off
Low
Medium High Auto
Return
Return
► ► ► ► ► ►

DNIe (Digital Natural Image engine)

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ▲ or ▼ button to select DNIe, then press the ENTER button.
This function doesn’t work when the Input Source is PC.
3 Press the ▲ or ▼ button to select Off, Demo, or On, then press the ENTER button.
Press the EXIT button to exit.
Off : Switches off the DNIe mode.
Demo: The screen before applying DNIe appears on the left and the screen after
applying DNIe appears on the right.
On: Switches on the DNIe mode.
The DNIe function is not supported in the Movie mode. (It is inactivated.)
DNIeTM (Digital Natural Image engine)
This feature brings you more a detailed image with 3D noise reduction and detail,
contrast and white enhancement.
Picture
More Detailed Settings Size : 16:9 Digital NR : Low DNIe : On Color Gamut : Normal Reset : OK
Enter
Move
Enter Return
Move
Picture
More Detailed Settings Size : 16:9 Digital NR : Low
DNIe : On
Color Gamut : Normal Reset
Move Enter
Off Demo
On
Return
Return
► ► ► ► ► ►
English - 30
Loading...
+ 98 hidden pages