Samsung SP-46L3HX, SP-50L3HX, SP-50L3HR, SP-56L7HX, SP-46L3HR User Manual

Infrared Remote Control

The performance of the remote control may be affected by bright light.

➢

POWER ON/OFF

PICTURE EFFECT SELECTION

WHEN YOU PRESS A BUTTON , ‘
APPEARS ALONG WITH SELECTED MODE

(TV, VCR, CATV, DVD OR STB) AND
REMAINING BATTERIES ON LCD

’

PICTURE SIZE

DIRECT CHANNEL SELECTION

ONE OR TWO-DIGIT CHANNEL

TEMPORARY SOUND SWITCH-OFF

TUNER/CABLE NETWORK

MOVE TO THE REQUIRED MENU

ADJUST AN OPTION VALUE

SOUND EFFECT SELECTION

STILL THE MAIN PICTURE

In the PIP mode, the main and

➢

MIX BOTH TELETEXT INFORMATION

SET THE MBR CODE OF REMOTE

PRESS THE RESET BUTTON FOR

sub pictures are stilled

AND THE NORMAL BROADCAST

AUTOMATIC SWITCH-OFF/

TELETEXT SIZE SELECTION

CONTROL FOR THE PRODUCTS

EXCEPT SAMSUNG PRODUCT

IF YOUR REMOTE CONTROL IS

NOT FUNCTIONING PROPERLY,

TAKE OUT THE BATTERIES AND

ABOUT 2~3 SECONDS. RE-

INSERT THE BATTERIES AND

TRY USING THE REMOTE

SELECTION

VOLUME INCREASE

VOLUME DECREASE

SELECTION

MENU DISPLAY/

TELETEXT INDEX

OPTION/

RESPECTIVELY

at the same time.

TELETEXT DISPLAY/

TELETEXT CANCEL

DNIe ON/DEMO/OFF/

(OPTION)

CONTROL AGAIN.

MAKE THE REMOTE CONTROL WORKS
FOR TV, VCR, CABLE-BOX (CATV),
DVD PLAYER, OR SET-TOP BOX (STB)

SWITCH REPEATEDLY BETWEEN THE
LAST TWO CHANNELS DISPLAYED

NEXT CHANNEL/
TELETEXT NEXT PAGE

EXTERNAL INPUT SELECTION/
TELETEXT HOLD

PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE

DISPLAY INFORMATION/
TELETEXT REVEAL

EXIT FROM ANY DISPLAY

CONFIRM YOUR CHOICE
(STORE OR ENTER)

SOUND MODE SELECTION

SRS TruSurround XT MODE SELECTION

FASTEXT TOPIC SELECTION
CURRENT TIME DISPLAY/

TELETEXT SUBPAGE

PIP FUNCTIONS;

- PIP ACTIVATING OR DEACTIVATING
(PIP ON)

- SWAPPING THE MAIN AND THE SUB
PICTURE (SWAP)

- SELECTING THE CHANNEL OF SUB
PICTURE (P

VCR/DVD FUNCTIONS;

- REWIND (REW)

- STOP

- PLAY/PAUSE

- FAST FORWARD (FF)

/∨)

^

Connecting to the External Input/Output

The “

EXT1” and “EXT3” are used for the equipment with an RGB output, such as video game devices

or video disc players.

VCR

Rear of the TV

or

or

①

This end can be fitted with:

◆ A SCART connector

◆ An S-Video connector and two audio RCA connectors (L+R); EXT 2

◆ Three RCA connectors (VIDEO + AUDIO-L and R)

②

If you have a second VCR and wish to copy cassette tape, connect the
source VCR to
redirect the signal from

③

If you have a decoder, connect the decoder to the VCR and the VCR to the
television.

➃

When you wish to record a programme, connect the receiver to EXT1 (or
EXT3) and the VCR to EXT2 so that you can redirect the signal from EXT1
(or EXT3) to EXT2.

EXT1 (or EXT3) and the target VCR to EXT2 so that you can

EXT1 (or EXT3) to EXT2.

①

②

DVD

③

Decoder /

Video game device

Video disc player

Satellite receiver

➃

Whenever you connect an audio or video system to your

☛

television, ensure that all

Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.

elements are switched off.

Connecting to the Audio Output

➢ The RCA (AUDIO OUT-L and R) connectors are used for equipment, such as an audio system.

Rear of the TV

Audio system

Connecting to the S-Video Input

The “S-VIDEO” and “AUDIO-L/R” connectors are used for equipment with an S-Video output, such
as a camcorder or VCR.

Side of the TV

Camcorder

and

VCR

To play picture and sound, both the S-VIDEO and AUDIO-L/R connectors must be used.

➢