Samsung SP43R1HL1X/XEC Service Manual

PROJECTION TV RECEIVER

Chassis : J60B(P)OMEGA2 Model: SP43R1HL1X/XEC

PROJECTION TV RECEIVER

CONTENTS

Specifications

Alignment and Adjustments

Exploded View and Parts List

Electric Parts List

PCB Diagram

Schematic Diagram

SERVICE

Manual

ELECTRONICS

Printed in Korea

AA82- 02166A

This Service Manual is a property of Samsung Electronics Co.,Ltd.

Any unauthorized use of Manual can be punished under applicable

International and/or domestic law.

Specifications

Samsung Electronics 1-1

1. Specifications

1-1 EUROPE/CIS

Specifications

1-2 Samsung Electronics

1-2 MIDDLE-ASIA

Specifications

Samsung Electronics 1-3

1-3 CHINA

Specifications

1-4 Samsung Electronics

1-4 EAST-ASIA

Alignment and Adjustments

Samsung Electronics 2-1

2. Alignment and Adjustments

2-1 When entering the service mode;

1. Turn on the TV, and then select “DYNAMIC” on the picture adjustment mode.

2. Turn off the TV(STAND-BY).

3. Enter the service mode by pressing the remote control keys in the following sequence: POWER OFF → INFO → MENU → MUTE → POWER ON

Note : If necessary, re-do steps 1~3. Initial display when the service mode is switched.

2-1-1 WHEN ARF SIGNAL IS RECEIVED

[Europe/cis] [Middle-Asia]

[China]/[East-Asia]

DEFLECTION Def. 480P Def. 1080I Def. 576P VIDEO ADJUST 1 VIDEO ADJUST 2 VIDEO ADJUST 3 VIDEO ADJUST 4 YC DELAY OPTION (83h 05h) CHECK SUM 0000 RESET T-OM2PEU - 0000 YY.DD.MM

DEFLECTION Def. 480P Def. 1080I Def. 576P VIDEO ADJUST 1 VIDEO ADJUST 2 VIDEO ADJUST 3 VIDEO ADJUST 4 YC DELAY OPTION (59 5C 18) CHECK SUM 0000 RESET T-OM2PMA- 0000 YY.DD.MM

DEFLECTION 480 offset 1080i offset 576p 50Hz Covergence NR VIDEO ADJUST 1 VIDEO ADJUST 1 1080i VIDEO ADJUST 2 VIDEO ADJUST 3 VIDEO ADJUST 4 OPTION (DE 0D 18) YC DELAY CHECK SUM 0000 RESET T-OM2PCH - 0000 YY.DD.MM

Alignment and Adjustments

2-2 Samsung Electronics

2-1-2 SERVICE MODE CONTROL KEYS

■

PRECAUTIONS

1. When EEPROM IC (IC902) is replaced, first connect the power cord and wait for about 4~5 seconds.

2. After replacing EEPROM IC (IC902), enter the Service mode. Next, enter the standard data or the previous EEPROM IC data before replacement. And then check and adjust any items related to Geometric, Picture, Option.

MAIN MENU

UP / DOWN

RIGHT / LEFT

MENU DISPLAY

Select item by moving cursor

Decrease or increase the adjustment values