Page 1
User Manual
- SMT-i6021, SMT-i6011, SMT-i6020, SMT-i6010
Page 2
WARNING
Power
Do not use damaged power cord or
loose outlets.
Do not pull or bend the cord by
force, and do not touch the power
plug with wet hand.
When the phone is out of use for a
long time, leave the plug pulled out
of the outlet.
Installation/Maintenance
Do not place the phone in a location
with a lot of dust, in a
subject to severe
temperature, or near a
device (cigarette heat,
Do not use or store flammable spray
or materials near the phone.
location that is
changes in
heating
heater, etc.)
For the power connection port of
phone, use the provided
power adapter. Use of a
adapter that does not meet
specifications may cause the
to become damaged, to
to explode.
If there is dirt or moisture on the pin
contact surface of a power plug, pull
out the plug and wipe it away
cloth. If dirt or moisture
the product even after
contact the service center.
If an abnormal sound, smell or
smoke is emitted from the phone,
pull out the power plug immediately,
and then contact the
Do not place objects containing
water such as vases, flowerpots,
cups, cosmetics, or medicines near
your phone. Humidity or liquid may
damage the parts and circuits of this
product.
remains on
wiping,
service center.
optional
power
the
product
with a
the
overheat, or
Page 3
1. Parts and Names
< SMT-i6021, SMT-i6020>
Phone Status Indicator
LCD screen
Handset
Menu button
Move button
Contacts button
Transfer button
Message button
Hold button
Conference button
Redial button
Headset button
Mute button
Speaker button
Volume button
OK
Direction key
Program key
Soft button
Direction key
OK button
Back button
Dial button
Navigation Button
- OK button: Selects and confirm menu
- Direction key: Navigates menu
LCD screen
Handset
Menu button
Move button
Contacts button
Transfer button
Message button
Hold button
Conference button
Redial button
Headset button
Mute button
< SMT-i6011, SMT-i6010 >
Phone Status Indicator
Program key
Soft button
Direction key
OK button
Back button
Dial button
Speaker button
Volume button
OK
Direction key
Navigation Button
- OK button: Selects and confirm menu
- Direction key: Navigates menu
Page 4
2. Phone Installation
Headset connection
Handset connection
PC connection
Network connection
Power connection (options)
USB port
3. Assembling the Wall-Mount Bracket
Assemble the wall-mount bracket where you want to use the phone.
The wall-mount bracket is an optional item. If necessary, please contact your dealer.
1 First, choose the location where you want to install the phone, and then
determine the positions of the screws by placing the phone at the target
location on the wall
2 Remove the desk cradle of the phone.
3 Insert the wall-mount bracket as shown in the figure
4 Install the phone onto the wall.
4. Dialing/Answering
Dialing Extension Call
Outbound Call
or button Enter a phone number.
Select [Voice Call] in the soft menu.
or button Dial button
Enter a phone number. Select [Voice Call] in the soft menu.
Page 5
Answering Incoming Calls
5. Basic Function
or button
Volume Control
Call Park
Call Transfer
or button or button
In a call, press the press the button
(To release the call hold, press the button)
In a call press the button and enter a phone number to which a call will be transferred (If it
is an outbound call, press
Dial button and then enter the phonzze number).
6. Menu Screen
Standby Screen Soft Menu Screen
Status Screen
Main Screen
Soft Menu
- Status Screen: The icons representing phone function settings are displayed.
- Main screen: The selectable menus, call processing status or various other
messages are displayed.
- Soft menu: The menus that the user can select according to status are
displayed.
From the soft menu, the user can select the convenient
functions available according to phone status
(standby/busy).
7. Parts in the Package
A. Phone Body
B. Handset
C. LAN Cable
D. Quick Guide
E. Phone Cradle
F. Power Adaptor (option)
G. Wall-Mount Bracket (option)
Page 6
8. Product Specifications
Item Specifications
Adaptor input power AC 100-250 V/50-60 Hz, 1.0 A
Adaptor output power DC 12 V; 2 A
PoE Input Power DC 48 V (802.3af)
PoE Device 802.3 af standard support (For CLASS 3)
Operating conditions Temperature: 0-45°C, humidity: 10-90 %
Wire interface Gigabit Ethernet
Wireless interface
(Only SMT-i6021, SMT-i6011)
Frequency Range
(Only SMT-i6021, SMT-i6011)
WLAN 802.11a/b/g/n 1x1
Bluetooth 4.0 ( Not support BLE )
2400~2483.5 MHz
5150~5825 MHz
Adapter Model
The adapter output power is DC 12V, 2A and the maker and the model are as follows.
- WEIHAI SUNGHO ELECTRONICS CO LTD/SHA24S12-EU
- WEIHAI SUNGHO ELECTRONICS CO LTD/SHA24S12-GB
- WEIHAI SUNGHO ELECTRONICS CO LTD/SHA24S12-US
Class B Device (Broadcasting communication device for home use)
This device obtained EMC registration mainly for home use (Class B) and may be used in all areas.
Caution: This wireless device is subject to electromagnetic interference.
This product is intended to be supplied by a Listed Power Unit marked “Class2” or “LPS” and rated 12
Vdc, Min 0.8A
Page 7
9. Notice
Approval Statement
CE Statement
Hereby, we declare that this device is in compliance with the essential requirements and other relevant provisions of
directive 1999/5/EC.
FCC approval
This device complies with Part 15 & 68 of the FCC`s Rules. Operation is subject to the following two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesirable operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
IC approval
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L'opération est soumise aux
deux conditions suivantes:
(1) cet appareil ne peut causer d'interférences, et
(2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais
fonctionnement de l'appareil.
User Information
Caution: Any changed or modifications not expressly approved by the party responsible for compliance could
void the user`s authority to operate this equipment.
Attention: Toute changé ou modifications non expressément approuvés par la partie responsable de la conformité
pourraient annuler l'utilisateur `autorité de faire fonctionner cet équipement.
This device is restricted to indoor use only within the 5.15 ~ 5.25GHz Band.
Cet appareil est restreint à l'utilisation à l'intérieur seulement dans la bande 5.15 ~ 5.25GHz.
This device complies with FCC&IC radiation exposure limits for an uncontrolled enviroment. Avoid operating this
device at a distance less than 20cm from the user.
Ce dispositif est conforme à la FCC&IC concernant les limites d'exposition aux radiations pour un environement
incontrôlée. Évitez de faire fonctionner cet appareil à une distance inférieure à 20 cm de l'utilisateur.
Loading...