Samsung SM-T230, Galaxy Tab 4 Schematics TSHOO
Level
7.
Disassembly and Assembly Instructions
7-1.
Repair
2
7-1-1.
1)
Disassembly
1
Be careful not to make scratch and molding damage!
Disjoint Hook at REAR // Disassemble REAR
START
Use Band point of disassembly jig
1)
2
Disassemble SCREW
Disassemble SCREW(5Points)
1)
Be careful nottoscratch FPCB
2)
Disassemble FPCB connector
3
Detach FPCB connector(3point)
1)
Be careful nottoscratch FPCB
2)
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
4
Disassemble BATTERY
5
Disassemble PBA
Level2Repair
Pull marked point.
1)
DISASSEMBLE BATTERY.
2)
Battery demolition be used only hand.
The disable tweezers, Driver, JIG
6
Check Battery flatness
5.7mm OK NG
Check each part.
1)
Check Battery flatness
6-1
Prepare the ruler or the card which can check
1)
mm thickness.
5.7
Place the Battery on the flat surface like the picture
2)
Printed image should be top)
(
※
Check the battery flatness using the ruler or the card
1)
In case of NG, battery should be replaced with
2)
new one.
7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Loading...