Samsung U350, SCH-U350, Smooth User Manual

Download

Page 1

PORTABLE Dual-BAND

MOBILE PHONE

User Manual

Please read this manual before operating your

phone, and keep it for future reference.

u350.book Page 1 Thursday, February 26, 2009 3:11 PM

Page 2

SCH-U350_Smooth_CA15_PM_020909_F4

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), LLC

Headquarters: Customer Care Center: 1301 E. Lookout Drive 1000 Klein Rd. Richardson, TX 75082 Plano, TX 75074 Toll Free Tel: 1.888.987.HELP (4357)

Internet Address:

http://www.samsungusa.com

2009 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related

entities. Do you have questions about your Samsung Mobile Phone?

For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:

www.samsungtelecom.com/support

GH68-21989A Printed in Korea

u350.book Page 2 Thursday, February 26, 2009 3:11 PM

Page 3

T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending.

ACCESS® and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries. The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered

trademarks and are wholly owned by the Bluetooth SIG. microSD™ and the microSD logo are Trademarks of the SD Card Association. Openwave® is a registered Trademark of Openwave, Inc. Smooth™ is a trademark of Samsung Telecommunications America.

Open Source Software

Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open source licenses, please visit:

http://www.samsungnetwork.com/Home/opensource

u350.book Page 3 Thursday, February 26, 2009 3:11 PM

Page 4

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

u350.book Page 4 Thursday, February 26, 2009 3:11 PM

Page 5

Table of Contents

Section 1: Getting Started .............................................. 4

Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4

Notes and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting Up Voicemail* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Section 2: Understanding Your Phone ......................... 11

Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Open View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 16

Section 3: Call Functions .............................................19

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Call In-Progress Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Voice Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Section 4: Menu Navigation ......................................... 31

Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Section 5: Entering Text ............................................... 38

Changing the Text Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Entering Text Using Word Mode . . . . . . . . . . . . . . . . . . . . . . . 38

Entering Upper and Lower Case . . . . . . . . . . . . . . . . . . . . . . . 39

Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Entering Quick Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Section 6: Understanding Your Contacts .................... 41

Opening Contacts Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Contacts Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Adding a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Adding Pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Editing an Existing Contact Entry . . . . . . . . . . . . . . . . . . . . . . 48

Deleting a Contact Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

My Name Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Finding My Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Emergency Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Section 7: Messaging .................................................. 53

Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Creating and Sending Text Messages . . . . . . . . . . . . . . . . . . 53

Creating and Sending Picture Messages . . . . . . . . . . . . . . . . 54

u350.book Page 1 Thursday, February 26, 2009 3:11 PM

Page 6

Creating and Sending Voice Messages . . . . . . . . . . . . . . . . . . 56

Retrieving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Receiving Multimedia Messages . . . . . . . . . . . . . . . . . . . . . . . 59

Receiving Multimedia Messages . . . . . . . . . . . . . . . . . . . . . . . 60

Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Changing Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Chat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Section 8: Bluetooth ..................................................... 70

Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Section 9: Changing Your Settings .............................. 73

My Verizon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

TTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Section 10: Media Center ............................................. 90

Media Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Tunes & Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Mobile Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Browse & Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Section 11: Tools .......................................................... 96

Voice Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Notepad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Section 12: Mobile Web ............................................. 104

Mobile Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Launching Mobile Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Exit Mobile Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Navigate the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Mobile Web Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Place a Call While Using Mobile Web . . . . . . . . . . . . . . . . . . 106

Section 13: Health and Safety Information ............... 107

Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . 107

Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 108

UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Consumer Information on Wireless Phones . . . . . . . . . . . . . . 109

Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

u350.book Page 2 Thursday, February 26, 2009 3:11 PM

Page 7

Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Using Your Phone Near Other Electronic Devices . . . . . . . . . 118

FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless

Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 120

Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Other Important Safety Information . . . . . . . . . . . . . . . . . . . 122

Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Availability of Various Features/Ring Tones . . . . . . . . . . . . . 123

Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . 124

Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Section 14: Warranty Information .............................127

Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 127

End User License Agreement for Software . . . . . . . . . . . . . . 130

Index ............................................................................135

u350.book Page 3 Thursday, February 26, 2009 3:11 PM

Page 8

Section 1: Getting Started

Understanding this User Manual

The chapters of this manual generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 135.

Also included is important safety information that you should know before using your phone. Most of this information is near the back of the guide, beginning on page 107.

Notes and Tips

Throughout this guide are icons and text that are set apart from the rest. These are intended to point out important information, quick methods for activating features, to define terms, and more. The definitions for these methods are as follows:

•

Notes

: Explain alternative options within the current feature, menu, or

sub-menu.

•

Tips

: Provide quick or innovative methods for performing functions

related to the subject at hand.

•

Important

: Points out important information about the current feature

that could affect performance, or even damage your phone.

This section allows you to start using your phone after activating your service, setting up your voicemail, contacting customer support, or getting an understanding of how this manual is put together.

Using the Battery

Note:

This phone comes packaged with a partially charged rechargeable standard Li-Ion battery and wall charger.

You must fully charge the battery before using your phone for the first time. A fully discharged battery requires up to 4 hours of charge time.

Important!:

Although the phone can be used while the battery is charging, the battery must be fully charged before first use, otherwise you could damage the battery.

u350.book Page 4 Thursday, February 26, 2009 3:11 PM

Page 9

Getting Started 5

Battery Indicator

The battery indicator in the upper-right corner of the display indicates battery power level. Four bars indicate a full charge, while an empty icon indicates an almost empty battery. Two to three minutes before the battery becomes too low to operate, a blinking empty battery icon appears and a tone sounds. If you continue to operate the phone without charging, it shuts down.

Using A Non-Supported Battery

Samsung handsets do not support the use of a non-supported battery.

When using a non-supported battery you will hear a series of beeps and you will see a warning message that indicates “

NON

SUPPORTED BATTERY. SEE USER MANUAL

” If you receive this

warning, battery charging has been disabled.

Samsung charging accessories (i.e. wall charger, and cigarette lighter adapter) will only charge a Samsung approved battery.

To continue use of your handset press .

Note:

When using a non-supported battery the handset can only be used for the duration of the life of the battery and cannot be recharged.

Important!:

Using a non-supported battery may cause damage to your phone. Use a Samsung supported battery only.

Installing the Battery

1. Press down, and slide the battery cover back and lift up to

remove.

u350.book Page 5 Thursday, February 26, 2009 3:11 PM

Page 10

Insert the top end of the battery into the phone housing using the directional arrow printed on the battery. The gold

contacts at the battery end must align with contacts on the

phone. Push bottom end of the battery down until it snaps into place.

3. Slide the battery cover up until it snaps into place.

u350.book Page 6 Thursday, February 26, 2009 3:11 PM

Page 11

Getting Started 7

Removing the Batter y

1. Press down, and slide the battery cover back and lift up to

remove.

2. Lift the battery from the bottom end (see arrow 1) and

remove.

u350.book Page 7 Thursday, February 26, 2009 3:11 PM

Page 12

Slide the battery cover up until it snaps into place.

Charging the Battery

Your phone is powered by a rechargeable standard Li-ion battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Using other accessories may invalidate your warranty and may cause damage.

Note:

The phone can be used while charging but will charge faster when powered off.

u350.book Page 8 Thursday, February 26, 2009 3:11 PM

Page 13

Getting Started 9

Wall charger

The wall charger is a convenient, light-weight charger that rapidly charges your phone from any 120/ 220 VAC outlet.

1. Pull the connector cover out and turn to expose the

connector. Insert the wall charger adapter end with the

arrow up into the connector at the bottom of the phone.

2. Plug the wall charger into a standard AC wall outlet.

When the phone is completely charged (the battery icon becomes still), unplug the adapter from the power outlet. Remove the adapter end from the connector and replace the connector cover.

Turning Your Phone On and Off

Turning Your Phone On

1. Open the flip, then press and the phone will turn

on.

Note:

As with any other radio-transmitting device, do not touch the internal antenna as it affects call quality and may cause the phone to operate at a higher power level than is necessary. The internal antenna is located along the top on the back side of your phone

2. Once the phone finds a signal, the time, date, and day

appear in the display.

3. You’re now ready to place and receive calls.

Note:

If the phone is outside the Verizon Wireless coverage area the roaming icon appears in the top of the display.

Turning Your Phone Off

Press for two or more seconds. Your phone powers off.

Correct

Incorrect

ENDEN D

Internal Antenna

ENDEN D

u350.book Page 9 Thursday, February 26, 2009 3:11 PM

Page 14

Setting Up Voicemail*

Voicemail allows callers to leave voice messages.

Note:

Once your voicemail account has been set up, you can use the voicemail selection 5 (under the Messaging menu) to view details of voice messages in your voicemail box.

Voicemail Setup

1. Press and hold or

from your phone or dial your wireless phone number from

any touch-tone phone.

2. When the recorded announcement begins, press to

interrupt (if applicable). An easy-to-follow setup tutorial

will begin. Follow the instructions to set up your new

password and record a greeting.

Listening to Voicemail

1. Press and hold or .

2. You are then prompted to enter your password followed by

key. Follow recorded prompts to listen to

messages, change administrative options, etc.

*Airtime and long distance charges apply. Mobile to Mobile minutes do not apply to Voicemail setup or retrievals.

tuvtuv

mnomno

SENDSE ND

tuvtuv

mno

SEND

SE ND

u350.book Page 10 Thursday, February 26, 2009 3:11 PM

Page 15

Understanding Your Phone 11

Section 2: Understanding Your Phone

This section outlines key features of your phone as well as screens and icons that display when the phone is in use.

Features of Your Phone

–

High Speed Data (1x Technology)

–

Global Positioning (GPS) Technology for VZ Navigator

–

Personal Organizer

•

Calculator

•

Calendar

•

Alarm Clock

•

Stop Watch

•

World Clock

•

Notepad

–

Messaging Services

•

Standard and Enhanced TXT Messaging

•

Picture Messaging

•

Email Messaging

•

Mobile Instant Messenger

•

Chat

–

VGA Camera

–

Advanced Speech Recognition

–

Speakerphone

–

Bluetooth® Wireless Technology **

**The Smooth™ supports the following Bluetooth profiles: Headset, Handsfree, Serial Port, Object Push for vCard and vCalendar, and Phonebook Access. The Smooth™ does not support all Bluetooth OBEX profiles. Go to

www.verizonwireless.com/bluetoothchart to check vehicle/accessory compatibility.

u350.book Page 11 Thursday, February 26, 2009 3:11 PM

Page 16

Closed View of Your Phone

The following illustration shows the main external features of your phone.

Features (Closed View)

Camera Lens

: Allows you to take photos.

Volume key

: Allows you to adjust the master volume or adjust the voice volume during a call. To mute the ringer

during an incoming call, press the volume key up or down.

Also press and hold the key down/up, to activate Sound Off mode/Normal mode.

External LCD

: External LCD shows signal and battery

strength, time, day, and date. It also displays incoming

calls, or message notifications.

Headset Jack

: Allows you to plug in an optional headset for

safe, convenient conversations.

Camera key

: Press to activate the camera.

Speakerphone Key

: Press this key to enable/disable the

speakerphone option.

Power/Accessory Connector

: The power/accessory

interface connector is used to plug in the charging

accessories and also connect any available accessory cables to your phone.

u350.book Page 12 Thursday, February 26, 2009 3:11 PM

Page 17

Understanding Your Phone 13

Open View of Your Phone

The following illustration shows the main features of the phone.

Features (Open view)

Internal LCD

: Displays all the information needed to operate

your phone.

OK Key

: Pressing when navigating through a menu accepts

the highlighted choice in a menu, or performs an action in

an application.

Left Soft Key

: This key is used to navigate through menus and applications by selecting the choice indicated on the

lower left area of the display screen.

Send Key

: Allows you to place or receive a call. From the

home screen, press the key once to access the All Call log.

Alphanumeric Keypad

: Use these keys to enter numbers,

letters, and characters.

Special Function Keys

: Enters special characters. Perform

various functions.

Earpiece

: The earpiece allows you to hear the other caller.

Directional key

: This key allow you to scroll through the

phone menu options.

u350.book Page 13 Thursday, February 26, 2009 3:11 PM

Page 18

Right Soft Key

: This key is used to navigate through menus and applications by selecting the choice indicated on the

lower right area of the display screen.

10.

End/Power Key

: Ends a call. Press and hold the END key, to

power On or Off. When you receive an incoming call, press to send the call directly to voicemail.

11.

Clear Key

: Deletes numbers when dialing a phone number,

or characters from the display when you are in Text Mode.

Press to return to the previous menu or screen when navigating features.

12.

Microphone

: The Microphone allows the other caller to

hear you clearly when you are speaking to them.

Command Keys

Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the left soft key and the right soft key .

Left Soft Key

Some functions of the left soft key are as follows.

•

Press the

Message

(left) soft key to open the Message menu.

•

When the left soft key function is Settings, press the

Settings

(left) soft

key to view settings for the feature.

•

When the left soft key function is Edit, press the

Edit

(left) soft key

to edit a Contact or Profile setting.

Right Soft Key

Some functions of the right soft key are as follows.

•

Press the

Contacts

(right) soft key to open your Contacts list.

•

When the right soft key function is

Options

, press the

Options

(right)

soft key to view more options for the current menu.

Clear Key

The

CLR

key is used to erase or clear numbers, text, or symbols from the display. You can also use to return to a previous menu or to return to the home screen from any menu.

•

If you enter an incorrect character, briefly press to backspace (and delete) the character.

•

To erase the previous word in a sentence, press and hold .

•

To back up one menu level, briefly press .

•

Press and hold to return to the home screen.

End Key

The

End

key is used to end a call, to turn your phone on/ off, to return to the home screen from any menu or cancel the last input.

•

Press and hold the

End

key

to turn your phone on or off.

•

Press

to disconnect a call.

CLR

CLRCLR

CLR

CLRCLR

ENDEN D

END

EN D

ENDEN D

u350.book Page 14 Thursday, February 26, 2009 3:11 PM

Page 19

Understanding Your Phone 15

•

Press to return to the home screen from any menu, or to

cancel the last input.

•

Press

to send an incoming call directly to Voicemail.

Send Key

The

Send

key is used to answer calls, dial calls, and to

recall the last number(s) dialed, received, or missed.

•

Press

to answer calls.

•

Enter a number and press

to make a call.

•

Press

from the home screen to display a list of all calls to and

from your phone.

•

Press

twice from the home screen to call the most recently

dialed, received, or missed number.

•

Press

to pick up a waiting call. Press

again to switch

back to the other call.

Directional keys

Use the Directional keys (up, down, left, right) to browse menus, sub-menus, and lists. Each key also acts as a shortcut to launch applications. The Directional keys can be customized to launch your favorite application. For more information, refer to “Set Shortcuts” on page 79.

Speakerphone Key

With the flip open, press and hold the

Speakerphone

key

(located on the right side of your phone) to switch from

using the earpiece to the speakerphone before or during a call.

Use the Volume keys (located on the left side of your phone) to

adjust the volume. Press and hold the

Speakerphone

key

to enable and disable the speakerphone option.

When answering a call with the flip open or closed, press and

hold the Speakerphone key . To end the call with the

flip closed, press and hold the Speakerphone key .

After the call has ended the speakerphone function turns off

automatically.

Camera Key

Press the

Camera

key (on the right side of the phone) to activate the camera. While in camera mode press the Camera key to take a photo.

END

EN D

END

EN D

SENDSE ND

SEND

SE ND

SENDSE ND

SEND

SE ND

u350.book Page 15 Thursday, February 26, 2009 3:11 PM

Page 20

Understanding the Display Screen

The top line of your phone’s display contain icons that indicate network status, battery power, signal strength, connection type and more.

The black area of the home screen shows icons that indicate feature and function status.

The following list contains icons that may appear in your display.

Display Icons

Airplane Mode

: Appears when Airplane Mode is on. When on, all RF functions for your phone are disabled, and you cannot use your phone to place or receive calls.

Roaming

: Your phone is outside your home area. While roaming, another wireless provider may be handling your call. The service rate for the call may be higher than those made from within your home area. Please refer to Verizon Wireless for roaming rates.

1X signal streng

th: Indicates your phone is using the CDMA

1X protocol. Appears when your phone is on and indicates the current signal strength. More bars indicate a stronger signal.

D signal strength

: Appears when your phone is receiving digital data. Appears when your phone is on and indicates the current signal strength. More bars indicate a stronger signal.

SSL

: Indicates the secure socket layer is actively transmitting your communications over the internet in an encrypted format.

Voice Privacy

: Prevents eavesdropping over a CDMA traffic

channel.

No service

: Your phone cannot find a signal because you’re outside a service area. You cannot make or receive calls. Wait for a signal or move to an open area to find a signal. This indicator always appears when you first turn on your phone and disappears once service is located.

Voice Call

: Indicates a call in progress.

Data Call

: Indicates a data call in progress.

u350.book Page 16 Thursday, February 26, 2009 3:11 PM

Page 21

Understanding Your Phone 17

Bottom Display Icons

Dormant

: Indicates no incoming or outgoing data.

E911

: Indicates Global Positioning Service (GPS) for 911 is

set to On for emergency calls only.

Location On

: Global Positioning Service is set to On for

location and 911 calls.

Battery Level

: More bars indicate a greater charge. When the battery is low, an empty battery icon flashes and the phone sounds an alert, which indicates your phone is about to shut down.

TTY

: Indicates that TTY is enabled.

Bluetooth On

: Indicates that Bluetooth wireless technology

is turned on.

Bluetooth Connected

: Indicates Bluetooth wireless technology is turned on and is paired with another Bluetooth-enabled device.

Bluetooth Active

: Indicates that Bluetooth wireless technology is connected to another device and receiving or pushing data.

All Sounds Off

: The ringer is silenced for all alerts, incoming

calls, and incoming messages.

Alarm Only

: Your phone will only ring when the set alarm

sounds.

Vibrate Only

: Your phone vibrates upon receiving a call.

Speakerphone

: Your phone switches to speakerphone

instead of earpiece.

Missed Calls

: Your phone displays this icon when calls are

missed.

New Msgs

: You’ve received a new text, page or web alert message. You’re also notified of a new message by animations and sound.

Calendar Event: Your phone displays this icon when you

have a calendar event scheduled.

Voicemail: You’ve received a voicemail message, page or

web alert message. You have one or more unread voicemail messages in your voicemail box. (Only applicable on the Verizon Wireless Network.)

u350.book Page 17 Thursday, February 26, 2009 3:11 PM

Page 22

Dialogue boxes

Dialogue boxes prompt for action, inform you of status, or warn of situations such as low memory. Dialogue boxes and their definitions are outlined below.

•

Choice

-Example: “SAVE MESSAGE?”

•

Reconfirm

-Example: “ERASE ALL MESSAGES?”

•

Performing

-Example: “SENDING...” “CONNECTING...”

•

Completed

-Example: “MESSAGE SENT”

•

Information

-Example: “NEW MESSAGE”

•

Error

-Example: “SYSTEM ERROR!”

•

Warning

-Example: “BATTERY LOW,” “MEMORY FULL!”

Alarm On

: Indicates that your phone has a set alarm.

Auto Answer

: Automatic answer is enabled. Your phone automatically picks up calls after the designated time with the stereo headset or when your Bluetooth headset or Bluetooth hands-free car kit is connected.

u350.book Page 18 Thursday, February 26, 2009 3:11 PM

Page 23

Call Functions 19

Section 3: Call Functions

This section describes how to make or answer a call. It also includes the features and functionality associated with making or answering a call.

Making a Call

1. From the home screen, enter the number to call using the

numeric keypad and press .

Answering a Call

You can answer calls with either the flip open or closed.

To answer a call with the flip in the closed position; open the flip. The call will be automatically answered.

To answer a call with the flip in the open position; press to answer the call, or , or the right soft key Ignore to send the call to voicemail, or left soft key Quiet to silence the ringer.

Answering Call-Waiting Calls

When you receive a call while on a call:

•

Press to answer the new call.

•

When you press and answer the incoming call, the original caller is placed on hold.

•

Press the

key again to return to your original call.

Call In-Progress Options

Access numerous menus and features even while in a call.

Note:

If the call is disconnected while accessing the Call-In Progress Options,

the options disappear from the display and the phone eventually returns to the home screen.

1. While in a call, press the right soft key Options. The

following menu items appear in the display.

• Messaging

: Displays the Messages menu.

• Contacts List

: Opens Contact list to view your contacts.

• Recent Calls

: Displays recent incoming, missed and outgoing calls.

• Bluetooth Menu

: Displays the Bluetooth menu.

• Main Menu

: Displays the Main menu.

•Notepad

: Opens the Notepad.

• Whisper Mode

: Increases microphone to maximum volume level.

Note:

During a call turn on Whisper Mode when speaking softly or when the caller cannot hear your voice clearly. This mode is useful in meetings or public places.

SEND

SEN D

SENDSE ND

ENDEN D

SENDSE ND

SEND

SEN D

u350.book Page 19 Thursday, February 26, 2009 3:11 PM

Page 24

Press the Directional key to highlight a menu. Press

to open the highlighted menu or to activate the

feature.

3. Press the left soft key Mute/Unmute to mute the call.

Press again to unmute the call.

Recent Calls

When you place, miss, or receive a call, a record of the call is saved in Recent Calls, which is a listing of the different types of calls you can either receive or make. These types of calls are:

•

Missed

: Displays any missed calls.

•

Received

: Displays any received calls that were answered.

•

Dialed

: Displays all outgoing calls made from your phone.

•

All

: Displays all missed, received, and outgoing calls made from your

phone.

Using the default

Urban

display theme,

List

menu layout: press

Press for the Recent Calls menu and press .

Press the Directional key up or down to highlight the call type that you want to view and press .

Press the Directional key up or down to view the call.

Viewing Recent Call History

Recent Calls retains information such as the duration, date and time, and whether the call was received, dialed, or missed.

1. From the home screen, press the key.

2. Press the Directional key down to highlight the

desired number.

3. Once the desired number is highlighted, press OPEN.

4. The following call information appear in the display:

• Call Type

: The title bar displays if the call is a missed, dialed, or

received.

•Name

: If the caller is in your Contacts list, their name is listed here as well as the appropriate icon to indicate Mobile 1, Mobile 2, Home, Work, or Fax. This option only appears if the caller is in your Contacts list. If the caller is not in your Contacts list, No Name appears.

• Number

: Displays the telephone number.

•Time

: The time of the call.

•Date

: The date of the call.

•Duration

: The duration of the calls made or received.

5. Press the right soft key Options to display the

following options:

• Save to Contacts

: Save the number to your Contacts list.

pqrspqrs

SEND

SEN D

u350.book Page 20 Thursday, February 26, 2009 3:11 PM

Page 25

Call Functions 21

Note:

If save doesn't appear, that entry is already in your Contacts list.

• Details

: Displays details about the caller if entered in Contacts.

•Erase

: Deletes the call from Call History.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

•Erase All

: Deletes all calls from Call History.

•View Timers

: Select to view the call timers for your phone.

6. Press the Directional key down to highlight an

option. Press to enter the highlighted option’s sub-

menu.

Call History Icons

When you view Recent Calls, an icon to the left of the number indicates the type of call.

Indicates a Missed call

Indicates a Dialed call

Indicates a Received call

Making Calls Using Call History

1. From the home screen, press . Press the Directional

key up or down until the desired number is

highlighted.

2. Press to call the highlighted number. Or, you can

press OPEN, then press to call the highlighted number.

Creating or Updating Contacts Using Call History

1. From the home screen, press then press the

Directional key up or down until the desired number is highlighted. Press the right soft key Options. Save

to Contacts is highlighted. Press .

2. Press the Directional key up or down to highlight

Add New Contact or Update Existing. Press .

SEND

SEN D

SEND

SEN D

SEND

SEN D

SEND

SEN D

u350.book Page 21 Thursday, February 26, 2009 3:11 PM

Page 26

If you selected Add New Contact, the following types are available.

•

Mobile 1

•

Mobile 2

•

Home

•

Work

•

Fax

4. If you selected

Update Existing

, proceed to step 9.

5. Press the Directional key up or down to highlight the

desired entry type (Mobile 1, Mobile 2, Home, Work, or Fax) then press .

6. Enter a name for the entry using the keypad. Press the left

soft key Abc if you wish to select a different method of

text entry, such as Word, Abc, ABC, 123, or Symbols.

7. To assign a Speed Dial location, press the Directional key

up or down to highlight the number you would like to

assign to a Speed Dial location and press the right soft key Options. Highlight Set Speed Dial and press

Highlight an unassigned location and press SET. A confirmation message appears in the display, Yes is

highlighted, press to add Contact to the speed dial

location.

Note:

Voicemail is assigned to Speed Dial location 1. Location 411: directory assistance, 611: customer service access, 911: emergency phone number.

Note:

You can assign a speed dial location to each number associated with the contact (Home, Work, Mobile 1, Mobile 2, and Fax.).

8. When you’re finished entering information for the entry,

press SAVE. The entry is saved to your Contacts.

9. An UPDATE EXISTING pop-up screen with a selection list

of entry types displays. Press the Directional key up

or down to highlight the desired type then press . The

number is added to the selected entry and saved to your Contacts.

u350.book Page 22 Thursday, February 26, 2009 3:11 PM

Page 27

Call Functions 23

Deleting Call History Entries

1. From the home screen, press then press the

Directional key up or down until the desired number

is highlighted. Press the right soft key Options. A pop-

up menu appears in the display.

2. Press the Directional key down to highlight Erase

and press . Select Ye s or No at the ERASE ENTRY?

pop-up screen.

3. Press .

Deleting All Call History Entries

1. From the home screen, press .

2. Press the right soft key Options. A pop-up menu

appears in the display.

3. Press the Directional key down to highlight Erase All

and press . Select Ye s or No at the ERASE ALL? pop-

up screen.

4. Press .

Contacts

Making Calls Using Contacts

Contacts are entries that you create to store names, numbers, and other information for people or groups of interest. If you’ve already entered information into your Contacts list, you can recall and dial the contact easily. For more information, refer to “Adding a Contact” on page 42.

1. From the home screen, press the right soft key

Contacts. Press the Directional key up or down until

the contact that you want to call is highlighted then press

VIEW. Details for the contact appear in the display.

Note:

To quickly locate a name, press (or multi-press) any key on the keypad

that corresponds to the first, second, and/or third letters of the contact’s name.

2. If the entry contains more than one number, press the

Directional key up or down to highlight the desired

number.

3. Press to call the number.

SEND

SEN D

SEND

SEN D

SEND

SEN D

u350.book Page 23 Thursday, February 26, 2009 3:11 PM

Page 28

Roaming

What is Roaming?

Your phone can roam on other compatible digital networks. Roaming occurs when you travel outside a pre-designated coverage area. The roaming icon displays when roaming is active and extra charges may apply when making or receiving calls.

Note:

Some features may be unavailable while roaming.

Roaming Options

The following roaming options are available:

–

Home Only

- Your phone is available for normal operation only in the

designated coverage area.

–

Automatic -A

: The preferred “A” side carrier roaming list is used to

acquire service.

–

Automatic - B

: The preferred “B” side carrier roaming list is used to

acquire service.

Note:

Contact Verizon Wireless for information regarding preferred systems.

To change your Roaming option, follow these steps:

1. Using the default

Urban

display theme,

List

menu layout:

press

2. Press for Settings & Tools menu. Press

Phone Settings. Press System Select.

3. Press the Directional key up or down to choose the

setting you want, and press .

Voice Commands

Voice Commands is advanced speech recognition software that can be used to activate a wide variety of functions on your phone. Voice Commands software automatically voice activates all contacts for voice dialing and searching, no pre-recording or training needed. Speak phone numbers naturally to dial, and use voice commands to navigate phone menus.

Voice Commands Settings

You can adjust the settings and preferences by opening Voice Commands menu. Using this menu, you can change the following Voice Command features:

1. From the home screen, press and hold the

Voice

Commands

key . The Voice Commands screen

appears in the display.

2. Press the right soft key

Settings

.The following options

appear in the display:

wxyz

mno

pqrspqrs

u350.book Page 24 Thursday, February 26, 2009 3:11 PM

Page 29

Call Functions 25

• Choice List

: If Voice Commands is not absolutely confident that it has correctly identified a name or number, it can display a choice list of up to three possibilities, and prompt you to confirm the correct one. You can control when choice lists appear by changing the Choice Lists setting to the following:

–

Automatic

: Voice Commands displays a choice list when it is not confident it has identified the correct choice from among multiple alternatives.

–

Always On

: When there are multiple alternatives, Voice Commands

always displays a choice list.

–

Always Off

: Voice Commands never displays a choice list. Instead,

the application picks the best from among the possible choices.

•Sensitivity

: Sensitivity controls the balance between rejecting too much, which means the phone frequently does not recognize names, numbers, or commands, and rejecting too little, which means it frequently recognizes something even if nothing was said. When Voice Commands rejects an utterance, it displays a message such as “Please repeat…” or “No match found.” If you frequently experience these messages, you might be able to get better recognition by selecting the Sensitivity setting Reject Less. If you frequently experience false activations (Voice Commands detects a wrong match), you might be able to get better performance by selecting the Sensitivity setting Reject More.

• Digit Dialing

: Use the Digit Dialing menu to adapt digit dialing to

your voice.

–

Adapt Digits

: Lets you adapt digits, which can improve speech

recognition of phone numbers. Adaptation takes about 60 seconds.

–

Reset Digits

: Erases any digit adaptation you have done and resets digit recognition to the factory default. If you have not adapted digits, this option is grayed out.

• Sound

: You can customize the Voice Command user interface by turning playback on or off for prompts, names, and numbers. You can also change the speed and volume of name playback.

–

Prompts

: Turns playback on or off for prompts such as “Please say a

command.”

–

Digits

: Turns playback on or off for digits, for example, when confirming

a phone number.

–

Names

: Turns playback on or off for names spoken in the Call, Lookup

and Send voice commands.

–

Name Settings

: Adjusts the speed and volume of name playback and

Voice Announce Caller ID feature.

–

Speakerphone

: Allows you to set the Speakerphone On of Off by

default.

• About

: Displays information about Voice Command including

version number, build number, and device number.

Voice Commands

The following is a list of functions that you can perform using Voice Commands speech recognition on your phone.

•

Call <Name or #>:

Dial by saying a Name in your Contacts List, a

Name and a Location (home, work, mobile) or the phone number.

•

Send <Msg Type>

: Send a text or picture message to a number or to

someone in your Contacts List.

u350.book Page 25 Thursday, February 26, 2009 3:11 PM

Page 30

•

Lookup <Name>

: Open the contact record for any name in your

Contacts List.

•

Go To <Menu>:

Open any application installed on your device.

•

Check <Item>

: Provides details of your phone status, voicemail, messages, missed calls, time, signal strength, battery level, and volume level.

•

My Verizon

: Provides information about your Verizon Wireless

account.

•

Help Guide

: Provides a helpful tutorial on how to use Voice

Commands.

Call <Name or #>

Call Digit Dialing

Digit Dial allows you to dial any phone number by simply speaking the digits into the phone. No training is necessary, and Digit Dial is programmed to understand natural speech.

1. From the home screen, press and hold the Voice

Commands key .

2. After a brief pause, a list of optional commands appears in

the display and the audio prompt "Please say a command"

plays through the earpiece or speakerphone.

3. Say “Call” at a distance of 3-12 inches from the phone in a

natural voice.

4. “Please say the name, number, voice mail or last number”

plays through the earpiece or speakerphone.

5. Say the area code and number that you want to dial into

the microphone, clearly and naturally.

6. The number that you said is repeated through the speaker

and your phone dials the number.

7. If Voice Commands is not sure of the number that you said,

a list of possible matches appears in the display.

8. You’re asked to confirm the correct number as Voice

Commands displays the results.

•

Say “

Yes

” to confirm the number.

•

Say “No” to reject the number.

•

Say “

Cancel

” to exit the Voice Command.

•

Say “

Repeat

” to have the selected number read one more time.

Call Name Dialing

To use Name Dial, you’ll need to have entries stored in your Contacts list. See page 42 for information on creating a Contacts list.

1. From the home screen, press and hold the Voice

Commands key .

u350.book Page 26 Thursday, February 26, 2009 3:11 PM

Page 31

Call Functions 27

After a brief pause, a list of optional commands appears in the display and the audio prompt “Please say a command”

plays through the earpiece or speakerphone.

3. Say “Call” at a distance of 3-12 inches from the phone in a

natural voice.

4. “Please say the name, number, voice mail or last number”

plays through the earpiece or speakerphone.

5. To use Name Dialing, say the name of the contact that you

want to dial.

6. The name that you said is repeated through the speaker

and your phone dials the number.

7. If Voice Commands is not sure of the number that you said,

a list of possible matches appears in the display.

8. You’re asked to confirm the correct number as Voice

Commands displays the results.

•

Say “

Yes

” to confirm the number.

•

Say “No” to reject the number.

•

Say “

Cancel

” to exit the Voice Command.

•

Say “

Repeat

” to have the selected number read one more time.

Note:

In case various number are displayed , “Which Number?” will display

in the Listening menu option.

9. The location is repeated through the speaker and your

phone dials the number.

Send <Msg Type>

Send Text

1. From the home screen, press and hold the Voice

Commands key .

2. A list of commands appears in the display and the audio

prompt "Please say a command" plays through the earpiece or speakerphone.

3. Say “Send Text” at a distance of 3-12 inches from the

microphone. “Please say the name or number” plays

through the earpiece or speakerphone.

4. Say the name exactly as it is displayed in your Contacts

list, first name followed by last name or the phone number

of the recipient.

Note:

In case various number are displayed , “Which Number?” will display in the Listening menu option.

u350.book Page 27 Thursday, February 26, 2009 3:11 PM

Page 32

The contact name appears in the To: field. For more information, refer to “Creating and Sending Text

Messages” on page 53.

Send Picture

Send Picture allows you to access the Picture Messaging menu. You can use entries stored in My Pictures or you can take a picture of an image using the camera.

1. From the home screen, press and hold the Voice

Commands key .

2. A list of commands appears in the display and the audio

prompt "Please say a command" plays through the

earpiece or speakerphone.

3. Say “Send Picture” at a distance of 3-12 inches from the

microphone. “Please say the name or number” plays

through the earpiece or speakerphone.

4. Say the name exactly as it is displayed in your Contacts

list, first name followed by last name.

Note:

In case various number are displayed , “Which Number?” will display

in the Listening menu option.

5. The contact name appears in the To: field. For more

information, refer to “Creating and Sending Picture

Messages” on page 54.

Goto <Menu>

The “Go To” command allows you to access a menu within the phone (for example, “Go to Contacts”). If no menu option is stated, a list of options will be provided.

Opening Menus and Applications

To navigate menu items on your phone or to open select applications using Voice Commands, perform the following:

1. From the home screen, press and hold the Voice

Commands key .

2. A list of commands appears in the display and the audio

prompt “Please say a command” plays through the

earpiece or speakerphone.

3. To begin navigation of menu items, say “Go To” at a

distance of 3-12 inches from the microphone. The menu

list displays and a prompt of “Please choose” plays

through the earpiece or speakerphone.

u350.book Page 28 Thursday, February 26, 2009 3:11 PM

Page 33

Call Functions 29

Select one of the following menus or applications: Media Center, Messaging, Contacts, Recent Calls, Settings &

Tools or Mobile Web

5. The option spoken opens.

Check <Item>

Checking Phone Status

Note:

Checking Phone Status

can be accessed with the phone flip in either the

closed or open position.

1. From the home screen, press and hold the Voice

Commands key .

2. A list of commands appears in the display and the audio

prompt "Please say a command" plays through the

earpiece or speakerphone.

3. Say “Check” at a distance of 3-12 inches from the

microphone. “Please choose” plays through the earpiece

or speakerphone. Valid “Check” commands are:

•"Status

": Displays and announces all of the available status indicators in sequence through the earpiece or speakerphone—if it is enabled.

•"Voicemail

" : Displays the number of new voicemail messages.

•"Messages":

Displays and announces the number of new voicemail, TXT, and Picture messages through the earpiece or speakerphone—if it is enabled.

•"Missed Calls

": Displays the missed call log.

•"Time

": Displays and announces the current time through the

earpiece or speakerphone—if it is enabled.

•"Battery

": Displays and announces the current battery level

through the earpiece or speakerphone—if it is enabled.

•"Signal Strength

": Displays and announces the current Digital and 1x signal strength levels through the earpiece or speakerphone—if it is enabled.

•"Volume":

Displays and announces the current master volume

setting through the earpiece or speakerphone—if it is enabled.

4. The option spoken opens.

Lookup <Name>

Name Lookup

Note:

Name Lookup

can be accessed with the phone flip in either the closed or

open position.

For name lookup, you must have entries in your Contacts list.

1. From the home screen, press and hold the Voice

Commands key.

u350.book Page 29 Thursday, February 26, 2009 3:11 PM

Page 34

A list of commands appears in the display and the audio prompt “Please say a command” plays through the

speakerphone.

3. In a single command, say “Lookup” followed by the name

of a contact entry at a distance of 3-12 inches from the microphone. For example, you could say “Lookup John

Smith."

4. If you only say “Lookup”, “Please say the name” plays

through the speakerphone. To use Lookup, say the name of the contact that you want to look up.

5. Say the name exactly as it is displayed in your Contacts

list, first name followed by last name.

6. The contact name appears in the display with other

information that you’ve entered for that contact.

My Verizon

Check your Verizon Wireless account status by voice command.

Note:

This features launches the browser to your account page and requires

a data plan and is subject to Verizon Wireless data coverage.

Help Guide

Provides helpful information on how to use Voice Commands.

1. From the home screen, press and hold the Voice

Commands key .

2. A list of commands appears in the display and the audio

prompt “Please say a command” plays through them

earpiece or speakerphone.

3. Say, "Help Guide" at a distance of 3-12 inches from the

phone in a natural voice. The tutorial appears in the display.

u350.book Page 30 Thursday, February 26, 2009 3:11 PM

Page 35

Menu Navigation 31

Section 4: Menu Navigation

This section explains the menu navigation for your phone. An outline of the available menus of your phone is included.

Menu Navigation

Access menus using the Directional key , soft keys , or use a shortcut.

Your Smooth™ comes with the

Urban

display theme as the

default display theme. You may change the display theme to the

Radius, or Optronica

theme. For more information about choosing

Radius, or Optronica

display theme, see “Display Themes” on

page 77.

The

Urban

display theme may be customized to show the Main

Menu layout as the

List

main menu layout, the

List

main menu

layout, the

Tab

main menu layout or the

Grid

main menu layout on the inside main display. For more information about choosing main menu layouts, see “Main Menu Settings” on page 77.

To navigate through the menus while in the

Tab

main menu

layout, use the following steps:

1. From the home screen, press MENU.

2. Press the Directional key left or right to highlight a

menu.

3. When the desired menu is highlighted, press the

Directional key up or down to highlight a sub-menu and press .

To navigate through the menus while in the

List or Grid

main

menu layouts, use the following steps:

1. From the home screen, press MENU.

2. Press the Directional key up or down to highlight the

desired menu and press .

3. Press the Directional key up or down to highlight the

desired sub-menu and press .

Return to the Previous Menu

Press to return to the previous menu.

CLRCLR

u350.book Page 31 Thursday, February 26, 2009 3:11 PM

Page 36

Menu Number Accelerators

You can also access menus and sub-menus faster and with fewer key presses using menu number accelerators. To access a menu or sub-menu quickly, press

, then enter the

menu and/or sub-menu number(s) for the feature desired.

See the following examples for standard menu navigation and number accelerators using the default

Urban

display theme,

List

main menu layout.

Example using

standard menu navigation

1. From the home screen, press MENU.

2. Press the Directional key down to highlight

Contacts

and press .

3. Press the Directional key down to highlight

Groups

and press .

4. Press the Directional key down to highlight

Family

and press .

Example using

number accelerators

1. From the home screen, press MENU.

2. Press

Contacts

3. Press

Groups

, then:

Family

to access the

Family sub-menu.

Directional key Shortcuts

From the home screen, press a Directional key to launch its corresponding application. For more information on personalizing directional shortcut keys, see “Set Shortcuts” on page 79.

mno

defdef

ghi

mnomno

defdef

ghighi

Calendar

Mobile Web

My Verizon

My Shortcuts*

*Press the Directional key to select a menu item.

2. EMail

3. Bluetooth On/Off

4. Alarm Clock

1. New TXT Msg

Default Directional

Shortcut Keys

u350.book Page 32 Thursday, February 26, 2009 3:11 PM

Page 37

Menu Navigation 33

Menu Outline

Media Center

1: Tunes & Tones

1: Get New Ringtones

1: Get New Applications

2: My Ringtones

1: Get New Ringtones

1: Get New Applications

3: My Sounds

1: Record New

2: Pictures

1: Get New Pictures

1: Get New Applications 2: My Pictures 3: Take Picture 4: Online Album

3: Games

1: Get New Applications

4: Mobile Web 5: Browse & Download

1: Get New Applications

6: Extras

1: Get New Applications

Messaging

1: New Message

1: TXT Message 2: Picture Message 3: Voice Message

2: Inbox 3: Sent 4: Drafts 5: Voicemail 6: Email 7: Chat

My Ringtones

1: Get New Ringtones

1: Get New Applications

My Pictures

Bluetooth

1: Add New Device

Contacts

1: New Contact 2: Contact List 3: Groups

1: No Group

u350.book Page 33 Thursday, February 26, 2009 3:11 PM

Page 38

2: Business 3: Colleague 4: Family 5: Friends

4: Speed Dials 5: In Case of Emergency 6: My Name Card

Recent Calls

1: Missed 2: Received 3: Dialed 4: All 5: View Timers

VZ Navigator

Settings & Tools

1: My Verizon 2: Tools

1: Voice Commands 2: Calculator

1: Normal 2: Tip 3: Converter

1: Temperature

2: Length 3: Weight 4: Area 5: Volume

6: Currency 3: Calendar 4: Alarm Clock 5: Stop Watch 6: World Clock 7: Notepad

3: Bluetooth Menu

1: Add New Device

4: Sounds Settings

1: Call Sounds

1: Call Ringtone

1: Get New Ringtones

1: Get New Applications

2: Call Vibrate

2: Alert Sounds

1: TXT Message

1: Tone

1: Get New Ringtones

1: Get New Applications 2: Vibrate 3: Reminder

u350.book Page 34 Thursday, February 26, 2009 3:11 PM

Page 39

Menu Navigation 35

2: Multimedia Message

1: Tone

1: Get New Ringtones

1: Get New Applications 2: Vibrate 3: Reminder

3: Voicemail

1: Tone

1: Get New Ringtones

1: Get New Applications 2: Vibrate 3: Reminder

4: Emergency Tone

5: Device Connect 3: Keypad Sounds 4: Keypad Volume 5: Service Alerts

1: ERI

2: Minute Beep

3: Call Connect

4: Service Change 6: Power On/Off

1: Power On

2: Power Off

5: Display Settings

1: Banner

1: Personal Banner 2: ERI Banner

2: Backlight

1: Display

1: Duration 2: Brightness

2: Keypad 3: Contrast 4: Wallpaper

1: Main Screen

2: Front Screen 5: Display Themes 6: Main Menu Settings 7: Dial Fonts 8: Clock Format

1: Main Clock

2: Front Clock

6: Phone Settings

1: Airplane Mode 2: Set Shortcuts

1: Set My Shortcuts

2: Set Directional Key 3: Voice Command Settings

1: Voice Dial

u350.book Page 35 Thursday, February 26, 2009 3:11 PM

Page 40

2: Voice Settings

1: Choice Lists 2: Sensitivity 3: Digit Dialing

1: Adapt Digits 2: Reset Digits

4: Sound

1: Prompts 2: Digits 3: Names 4: Name Settings

1: Speed 2: Volume

5: Speakerphone

5: About 3: Menu Readout 4: TXT Msg Readout 5: Digit Dial Readout 6: Call Alert

4: Language 5: Location 6: Security

1: Edit Codes

1: Phone Only

2: Calls & Services

2: Restrictions

1: Location Setting 2: Calls

1: Incoming Calls 2: Outgoing Calls

3: Messages

1: Incoming Messages

2: Outgoing Messages 3: Phone Lock Setting 4: Lock Phone Now 5: Restore Phone

7: System Select 8: NAM Select

1: NAM Selection 2: Auto NAM Selection

9: Quick Search

7: Call Settings

1: Answer Options 2: Auto Retry 3: TTY Mode 4: One Touch Dial 5: Voice Privacy 6: Data Settings 7: DTMF Tones

8: Memory

u350.book Page 36 Thursday, February 26, 2009 3:11 PM

Page 41

Menu Navigation 37

1: Memory Usage 2: My Pictures 3: My Ringtones 4: My Sounds

9: Phone Info

1: My Number 2: SW/HW Version 3: Icon Glossary 4: Software Update

1: Status 2: Check New

u350.book Page 37 Thursday, February 26, 2009 3:11 PM

Page 42

Section 5: Entering Text

This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use Word text entry system to reduce the amount of key strokes associated with entering text.

Changing the Text Mode

1. While composing a message, press left soft key Abc to

display a pop-up menu with the following Text Mode

options:

•

Word

•

Abc

•

ABC

•

123

•

Symbols

•

Domain Extensions*

•

Quick Text**

Note:

*The Domain Extensions option is only available when the To field is highlighted. Use the Shortcuts option to quickly enter @, .com, .net, or .edu to an Email address.

**The Quick Text option is only available when entering the body of the message. Use the Quick Text option to quickly enter a message.

Entering Text Using Word Mode

Word

recognizes the most commonly used word for any sequence of key presses and inserts that word into your message. It’s much faster than the traditional method of text entry (Abc) and requires only one key press per letter of the word that you’re spelling.

1. From the home screen, press the left soft key

Message, press New Message, and press

TXT Message to compose a new text message.

2. Enter the phone number or Email address of the recipient,

then press the Directional key down to move to the

Text f i e l d .

3. Press the left soft key Abc to display a pop-up menu

containing Text Mode options.

4. Abc is highlighted by default. Press the Directional key

up or down to highlight Word, then press .

u350.book Page 38 Thursday, February 26, 2009 3:11 PM

Page 43

Entering Text 39

Now, for practice, enter the word “Hello” into your message by pressing each of the following keys only once

Word recognizes that the most frequently used word for the sequence of numbers entered. The word you just entered is “HELLO.” If more than one word shares the same sequence, Word provides the most common of the two. Press to display other words in the dictionary, if available.

Entering Upper and Lower Case

•

Enter characters while in

ABC

mode by pressing the key that contains

the desired characters

for “G”.

•

Press the key repeatedly to cycle through other available characters for that key.

•

Pause briefly when the desired character appears in the display to accept the character and therefore insert it into the message.

•

Press to enter a space.

•

To cycle between initial caps, uppercase, and lower case for characters in

ABC

mode, briefly press .

•

To cycle between initial caps, uppercase, and lower case for characters in

Word

mode, briefly press .

Entering Symbols

Use symbol mode to enter symbols @ or % into a text message.

1. From the home screen, press the left soft key

Message, press New Message, and press

TXT Message to compose a new text message.

2. Enter the phone number or Email address of the recipient,

then press the Directional key down to move to the

Text field.

3. Press the left soft key Abc to display a pop-up menu

containing the Text Mode options.

Abc

is highlighted by default. Press the Directional key

up or down to highlight Symbols, then press .

The first of three screens containing symbols appears in the display.

5. Press left soft key Prev or right soft key Next to

page through the other symbols, if necessary.

6. Enter the key that corresponds with the symbol that you

wish to enter. For example, press for an

exclamation point (!) on the first page of symbols.

H E L L O

ghighi

defdef

jkljkl

jkl

mno

ghi

ghighi

u350.book Page 39 Thursday, February 26, 2009 3:11 PM

Page 44

Repeat steps 3 through 6 to insert as many symbols into your message as desired.

Entering Numbers

Enter numbers into a text message while in number mode (

123

). For instructions on changing Text Mode see “Changing the Text Mode” on page 38..

1. From the home screen, press the left soft key

Message, press New Message, and press

TXT Message to compose a new text message.

2. Enter the phone number or Email address of the recipient,

then press the Directional key down to move to the

Text f i e l d .

3. Press the left soft key Abc to display a pop-up menu

containing the Text Mode options.

Abc

is highlighted by default. Press the Directional key

up or down to highlight 123, then press .

5. Enter the key that corresponds with the number that you

wish to enter. For example, press for the number 4.

6. When you are finished adding numbers, press the left soft

key 123 to select a different method of text entry.

Entering Quick Text

Use Quick Text mode to enter pre-loaded messages into a text message.

1. In the

Text

field, press the left soft key Abc to display a

pop-up menu containing the Text Mode options.

Abc

is highlighted by default. Press the Directional key

up or down to highlight Quick Text, then press .

3. Press the Directional key up or down to highlight one

of the pre-loaded quick text message, then press .

Note:

You can also create a new quick text message by pressing the right soft key

New

. Enter a new Quick Text message. Press to

save the message or press the right soft key to cancel.

ghi

u350.book Page 40 Thursday, February 26, 2009 3:11 PM

Page 45

Understanding Your Contacts 41

Section 6: Understanding Your Contacts

This section allows you to manage your daily contacts by storing their name and number in your Address Book.

Opening Contacts Menu

The Contacts menu provides access to powerful features such as adding Groups, creating and sending vCards, and viewing the phone number assigned to your phone by Verizon Wireless.

NOTE

: The menu navigation instructions for this section uses the

default

Urban

display theme,

List

menu layout.

1. From the home screen, press

2. Press for Contacts menu.

3. Press the Directional key up or down to highlight the

Contacts menu item of your choice, then press to

select it.

Contacts Icons

You can assign multiple entries to a contact. The icons in the following table represent all available entry types.

Mobile 1 icon

. Enter a mobile number for the

entry in this field.

Home icon

. Enter a home number for the

entry in this field.

Work icon

. Enter the work number for the

entry in this field.

Email 1 icon

. Enter an Email address for the

entry in this field.

Group icon

. Select an available group to

associate with the entry in this field.

Picture icon

. Select an available pre-loaded image or downloaded image from Picture ID to associate with the contact.

Ringtone icon

. Select a ringtone to associate

with the entry in this field.

Mobile 2 icon

. Enter a secondary mobile

number for the entry in this field.

mnomno

u350.book Page 41 Thursday, February 26, 2009 3:11 PM

Page 46

IM Name

: Enter the name associated with the

Instant Message screen name.

Fax: Enter a fax number for the entry in this

field.

Email 2 icon

. Enter an Email address for the

entry in this field.

Street: Enter the street address for the

contact.

City: Enter the city for the contact.

State: Enter the state for the contact

Zip Code: Enter the zip code for the contact

Country: Enter the country for the contact

Note icon

. Enter a note for the entry in this

field.

Note

: The name entered in this field will populate the

associated Instant Messaging application.

Adding a Contact

When you add information to your Contacts, you can add it as a new entry or as an existing entry.

Method 1

Creating a new Contact from the home screen

1. From the home screen, press

2. Press for Contacts menu.

3. Press New Contact.

4. Enter a name for the entry using the keypad.

5. Press the Directional key up or down to highlight the

appropriate type (

Mobile, Home, Work, Email

, etc.). Once

highlighted, use the keypad to enter required information.

6. Press the Directional key up or down to highlight

other type fields, if desired. Enter information using the keypad.

7. To assign a Speed Dial location after entering the number,

press the right soft key Options. Highlight Set Speed

Dial and press .

8. Highlight an unassigned location and press SET. A

confirmation message appears in the display, Yes is highlighted, press to add the Contact to the speed

dial location.

Note:

Voicemail is assigned to Speed Dial location 1.

mno

u350.book Page 42 Thursday, February 26, 2009 3:11 PM

Page 47

Understanding Your Contacts 43

Note:

You can assign a speed dial location to each number associated with the contact (Home, Work, Mobile 1, Mobile 2, and Fax.).

9. When you’re finished entering information for the entry,

press SAVE to save the entry to your Contacts.

Method 2

Adding a number to a new or existing Contact from the home screen

You can add new numbers to the Contacts by simply entering the number from the home screen, then following the necessary prompts to complete the process.

1. From the home screen, enter the number to save using the

keypad, then press the left soft key Save.

You’re prompted to select from Add New Contact ,

Update Existing or Notepad.

2. Press to enter the number as a Add New Contact,

press to add the number to Update Existing or

press to save the entry to Notepad.

3. If you selected Add New Contact, the following types are

available.

•

Mobile 1

•

Mobile 2

•

Home

•

Work

•

Fax

4. If you selected

Update Existing

, proceed to Step 9.

5. Press the Directional key up or down to highlight the

desired entry type (mobile, home, work, etc.) then press

6. Enter a name for the entry using the keypad. Press the left

soft key Abc if you wish to select a different method of

text entry, such as Word, Abc, ABC, 123, or Symbols.

7. To assign a

Speed Dial

location, highlight the number you

would like to assign to a Speed Dial location and press the right soft key Options. Highlight Set Speed Dial and

press .

Highlight an unassigned location and press SET. A

confirmation message appears in the display, Yes is

highlighted, press to add Contact to the speed dial location.

abcabc

def

u350.book Page 43 Thursday, February 26, 2009 3:11 PM

Page 48

Note:

Voicemail is assigned to Speed Dial location 1.

Note:

You can assign a speed dial location to each number associated with the contact (Home, Work, Mobile 1, Mobile 2, and Fax.).

8. When you’re finished entering information for the entry,

press SAVE. The entry is saved to your Contacts.

9. If you selected Update Existing, the Contact List opens in

Search mode. Press the Directional key up or down

to browse through entries, or enter the name of the entry

using the keypad. Once you’ve highlighted the entry you wish to update, press .

10. An UPDATE EXISTING pop-up screen with a selection list

of entry types displays. Press the Directional key up

or down to highlight the desired type then press . The number is added to the selected entry and saved to your

Contacts.

Method 3

Storing Numbers After a Call

Once you’ve finished a call, you can store the number of the caller to your Contact List.

Note:

If the call was incoming and Caller ID information was unavailable, then the store option is also unavailable.

1. After you press to end your call, the call time,

length of call and phone number appears in the display.

2. Press the right soft key Save. You’re prompted to

select Add New Contact, or Update Existing. Follow the

on-screen prompts to designate other information.

Adding Pauses

Calls to automated systems often require a password or account number. Instead of manually entering numbers each time, store the numbers to your Contacts along with special characters called pauses.

1. From the home screen, enter the number.

2. Press the right soft key Options to highlight

2-Sec

Pause

(A “P” appears in the display) or Wait (A “W”

appears in the display) and press .

• Add 2-Sec Pause

: A two-second pause stops the calling sequence for two seconds and then automatically sends the remaining digits.

•Add Wait

: A hard pause stops the calling sequence until further

input from you.

ENDEND

u350.book Page 44 Thursday, February 26, 2009 3:11 PM

Page 49

Understanding Your Contacts 45

When you’re finished entering information for the entry, press the left soft key SAVE.

Note:

Entering multiple Add Pauses extends the length of a pause. For example, two consecutive Add Pauses cause a total pause time of four seconds. Keep in mind pauses count as digits towards the 48-digit maximum.

Groups

You can place Contact entries into categories, called “

Groups

.” Groups allow you to search your Contacts faster, quickly send messages to one or more group members, and more.

Note:

By default, new entries to your Contacts are placed into the No Group unless another group is specified.

View Groups

1. From the home screen, press

2. Press for Contacts menu.

3. Press

Groups

. The following groups appear in the

display.

•

No Group

•

Business

•

Colleague

•

Family

•

Friends

4. Press the Directional key up or down to highlight the

desired group, then press to access the group and view its contents.

Move an Entry to Another Group

1. From the home screen, press the right soft key

Contacts. Press the Directional key up or down to

highlight the contact you wish to move.

2. Press the left soft key Edit. Press the Directional key

up or down to scroll to the Group option.

3. Press the left soft key Set. Choose from the following

groups:

•

No Group

•

Business

•

Colleague

•

Family

•

Friends

mnomno

def

u350.book Page 45 Thursday, February 26, 2009 3:11 PM

Page 50

Press the Directional key up or down to highlight the group containing the entry that you wish to move, then

press .

5. Press SAVE. The selection has been saved to the

designated group.

Create a New Group

In addition to the five groups already in your phone, you can create additional groups (a maximum of 25). New group names must be within a 32-character limit.

1. From the home screen, press

2. Press for Contacts menu.

3. Press

Groups

. Your existing groups appear in the

display.

4. Press the left soft key

New

. A

NEW GROUP

pop-up

menu displays with the “Enter Name” field highlighted.

5. Enter the Group name.

6. Press SAVE to save. The Groups list now displays

the new group added.

Send a Text Message to Members of a Group

Use Send Message in the Group feature to send a message to as many as 10 members of a group at once.

Note:

Text messaging availability varies when roaming off the Verizon Wireless Network.

1. From the home screen, press

2. Press for Contacts menu.

3. Press

Groups

. Your existing groups appear in the

display.

4. Highlight the desired group name and press the right soft

key Options. Highlight New TXT Msg and press .

5. Press the Directional key up or down to highlight the

contacts in the group you want to send a message. Press

to place a checkmark next to each selection to send

messages to.

6. Press the left soft key Done after selecting up to 10

contacts.

mnomno

defdef

mnomno

defdef

u350.book Page 46 Thursday, February 26, 2009 3:11 PM

Page 51

Understanding Your Contacts 47

Note:

You can mark up to 10 members of a group for message distribution. If you try to mark an 11th member, you’ll be notified that “MAXIMUM NUMBER OF RECIPIENTS IS 10”.

7. Press the Directional key down to place the cursor in

the Text field.

8. Enter the content of your message using the keypad.

9. To send the text message, press SEND.

Send a Picture Message to Members of a Group

Note:

Only available within Verizon Wireless Enhanced Services Area.

1. From the home screen, press

2. Press for Contacts menu.

3. Press

Groups

. Your existing groups appear in the

display.

4. Highlight the desired group name and press the right soft

key Options. Highlight New Picture Msg and press

5. Use the Directional key down to highlight the

contacts in the group to which you want to send a

message. Press to place a checkmark next to each

selection to send messages to.

6. Press the left soft key Done after selecting up to 10

contacts.

7. Press the Directional key up or down to move the

cursor into the following entry fields:

•Text

: Add text to the Picture Message.

•Picture

: Add an picture from My Pictures gallery to the message.

–

To add a picture in the picture entry field, press the left soft key My

Pics

. Use the Directional key to highlight the desired

picture and press

• Sound:

Add sound to the Picture Message.

• Subject

: Add a subject to the Picture Message.

•Name Card

: Attach a Name Card or an entry in your Contacts to

the message.

8. Once you’ve finished adding the desired content to your

Picture Message, press SEND to send the Picture Message to the intended recipients.

mnomno

defdef

u350.book Page 47 Thursday, February 26, 2009 3:11 PM

Page 52

Finding a Contacts Entry

From the home screen, you can quickly open the Contacts list. Contacts is a quick way of viewing entries you’ve stored in the Contacts list.

1. From the home screen, press the right soft key

Contacts. The Contact List displays.

2. In the

Go To

field, enter the first and second letters of the

name you wish to search until it is highlighted.

Editing an Existing Contact Entry

1. From the home screen, press the right soft key

Contacts.

2. Press the Directional key up or down to highlight the

contact list entry and press the left soft key Edit.

3. Press the Directional key up or down to highlight the

name, number, Email address, or other field that you wish

to edit.

4. Press to backspace and delete numbers, text, or

symbols.

5. Press and hold to erase all numbers in the

highlighted field. Use the keypad to re-enter numbers, text,

or symbols.

6. When you’re finished editing the entry, press SAVE.

Your changes are saved.

Deleting a Contact Entry

1. From the home screen, press the right soft key

Contacts.

2. Press the Directional key up or down to highlight the

contact list entry and press VIEW.

3. Press the left soft key Erase. A pop-up “ERASE

CONTACT?” screen displays.

4. Highlight

Yes

or No, then press .

Delete All Contacts

1. From the home screen, press the right soft key

Contacts.

2. Press the right soft key Options.

3. Press the Directional key up or down to highlight the

Erase All

entry and press .

CLRCLR

CLR

u350.book Page 48 Thursday, February 26, 2009 3:11 PM

Page 53

Understanding Your Contacts 49

A pop-up “ERASE ALL CONTACTS?” screen displays. Press the Directional key up or down to highlight

Yes

or No,

then press .

5. A pop-up “ENTER PHONE LOCK CODE” screen displays.

Enter the last 4-digits of your telephone number and press

Speed Dialing

Note:

1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers stored in your Contact List quicker.

Speed dialing allows you to press and hold a key (or keys) to dial the number associated with those key(s). There are three types of speed dialing;

1-touch, 2-touch

, and

3-touch dialing

Note:

Memory location 001 is reserved for voicemail. Location 411: directory assistance, 611: customer service access, 911: emergency phone number.

1-touch dialing

Call phone numbers assigned to memory locations 002 - 009 by pressing and holding the any of the 2 - 9 keys. For example, to speed dial the number assigned to location 2, press and hold

until the name and number appear in the display and the

number is dialed.

2-touch dialing

Call phone numbers assigned to keys 010 through 099 by briefly pressing the first key, then pressing and holding the second key. For example, to speed dial the number assigned to 013, briefly press , then press and hold until the number dials.

3-touch dialing

Call phone numbers assigned to memory locations 100 through 999 by briefly pressing the first and second keys, then pressing and holding the third key.

For example, to dial location number 113, briefly press

, then press and hold until the number dials.

Assign a speed dial location

1. From the home screen, press

2. Press for Contacts menu.

3. Press

Speed Dials

. The Speed Dials screen displays

with the first available number highlighted.

4. Press the Directional key up or down to highlight the

number you wish to assign or enter the speed dial location using the keypad. Press SET. The SET SPEED DIAL

screen displays.

abcabc

def

mno

ghighi

u350.book Page 49 Thursday, February 26, 2009 3:11 PM

Page 54

Press the Directional key up or down to highlight the entry you want, then press .

6. At the pop-up screen, highlight Yes or No and press .

7. Continue to assign speed dial entries or press to

return to the home screen.

My Name Card

My Name Card allows you to create a virtual business card. you can send the card to recipients as a vCard attachment.

1. From the home screen, press

2. Press for Contacts menu.

3. Press My Name Card.

4. My Name Card opens with the Name field highlighted.

5. Enter information in each of the fields as desired. Press the

Directional key up or down to move between fields, then use the keypad to enter information.

Note:

A check mark appears to the left of selected contacts.

6. When finished, press to save the Name Card.

Sending Contact Information (vCard) to another Bluetooth enabled phone

You can send individual contacts or your entire contact list to or from another device that is Bluetooth enabled*.

Note:

*If Bluetooth is not powered on, or your Smooth™ is not paired with another device see “Turning Bluetooth On or Off” on page 70.

Important!:

Not all Bluetooth devices will accept a name card.

1. From the home screen, press right soft key Contacts.

2. Highlight a contact and press right soft key Options.

3. Press Send Name Card. The following options

display:

•TXT Message

: Allows you to send a name card via TXT Message. A name card with a picture cannot be sent in a TXT Message because it exceeds the maximum number of characters allowed.

• Picture Message

: Allows you to send a name card via Picture

Message.

•Via Bluetooth

: Allows you to send a name card to a Bluetooth enabled device.

4. Press

Via

Bluetooth.

ENDEN D

mnomno

wxyz

defdef

u350.book Page 50 Thursday, February 26, 2009 3:11 PM

Page 55

Understanding Your Contacts 51

Highlight the desired contact and press MARK. To choose all contacts, press right soft key Mark All.**

When finished, press left soft key Done.

6. Highlight the destination device an press .

Note:

If your Smooth™ is not paired already with the destination device, follow the instructions on p.90 for Bluetooth Search.

7. Highlight Yes to connect to the other device. press .

8. The other device will ask to connect. Press .

“

CONNECTING

” appears in the display.

9. When the information is exchanged, a message will appear

that the transfer is complete.

Note:

** All information will be transferred except for group name , ringtone, and Emergency (ICE) contact reference.

Finding My Phone Number

1. From the home screen, press

. Press for

Settings & Tools menu.

2. Press Phone Info.

3. Press My Number. The mobile device phone

number and mobile identification number are displayed.

Emergency Contacts

Adding Emergency Contacts

1. From the home screen, press the right soft key

Contacts

In Case of Emergency

is highlighted, press

VIEW

Contact 1, Contact 2, Contact 3

and

Personal Info

options

are shown. Highlight a contact location and press

ADD

Note:

Use the

Personal Information

option to enter information such as

illnesses, allergies, and other detail information.

4. Press

From Contacts

to add an emergency number

from your contacts list. Select a Contact and press .

5. Press

New Contact

to enter a new contact as an

emergency number. Enter Contact information and press

SAVE

6. The Emergency Contact is added and is displayed in the

Contact List in red font.

wxyz

abcabc

u350.book Page 51 Thursday, February 26, 2009 3:11 PM

Page 56

Unassign an Emergency Contact

1. From the home screen, press the right soft key

Contacts

. Press the Directional key up or down to

highlight the Emergency Contact you want to unassign.

Note:

Emergency contacts are displayed in red font.

2. Press the right soft key

Options

3. Press

Unassign ICE Contact

. The “

UNASSIGN ICE

CONTACT?

” confirmation screen appears in the display.

Yes

is highlighted, press to confirm or highlight No

and press to return to your contact list.

mnomno

u350.book Page 52 Thursday, February 26, 2009 3:11 PM

Page 57

Messaging 53

Section 7: Messaging

This section allows you to send or receive different types of messages. It also includes the features and functionality associated with messaging.

Types of Messages

Your phone is capable of sending Email, text, and picture messages. Send Email, text, and picture messages by simply entering the Email address or the phone number of the recipient

in the To: <.........> or Send To field when creating a new

message.

Creating and Sending Text Messages

You can send text messages to another mobile phone or to an Email address.

NOTE

: The menu navigation instructions for this section uses the

default

Urban

display theme,

List

menu layout.

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press

New

Message.

Note:

You can also access

Messaging

menu by pressing the left soft key .

Press to compose a new text

message.

Enter the phone number or Email address of the recipient. At any point while entering your recipient(s) phone number

or Email address, press the left soft key or the

right soft key soft keys to display additional options.

䊳

Press the left soft key to change Text Mode. Choose

Word, Abc, ABC, 123, Symbols and Domain Extensions modes

of text entry.

䊳

Press the right soft key to add a recipient From

Contacts, Recent Calls or Groups.

If you do not select an option press the to return to your message.

abcabc

CLRCLR

u350.book Page 53 Thursday, February 26, 2009 3:11 PM

Page 58

Press the key to move to the Text field. In the text field, compose your message using the keypad. At any

point while composing a message, press the left soft key

or the right soft key soft keys to

display additional options.

䊳

Press the left soft key to change Text Mode. Choose

Word, Abc, ABC,123, Symbols and Quick Text modes of text

entry.

䊳

Press the right soft key to display a pop-up menu with the options listed:

: Save the message to your Draft folder.

: Select this option to display the following sub-menus:

–

Quick Text

: Choose from up to 15 pre-loaded messages. You can add

15 additional messages by pressing the right soft key

Options,

New is highlight, press

You can erase Quick Text messages by

pressing the left soft key Erase.

–

Graphic

: Lists preloaded and downloaded graphics.

–

Animation

: Lists preloaded and downloaded animations.

–

Sound

: Lists preloaded and downloaded sounds.

–

Name Card

: Attach My Name Card information or information from

one of your Contacts.

•Edit Text Format

: Allows you to edit the text size, alignment, style,

color, and background color.

• Priority Level

: Save the message with a High or Normal priority.

• Callback #

: Provides the ability to send a callback # with the

message.

• Cancel Message

: Cancels the message and allows you to save it

in the Drafts folder.

Note:

If you do not select an option press the to return to your message.

7. Press the Directional key to highlight an option.

Press to perform the function for the option, or to

enter its sub-menu.

8. To send the message, press SEND.

Creating and Sending Picture Messages

Note: Only available within Verizon Wireless Enhanced Services Area.

Picture Message combines text, picture, and sound creating an intuitive message. This is also known as Multimedia Messaging (MMS).

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press

New

Message.

4. Press Picture Message.

CLR

abcabc

u350.book Page 54 Thursday, February 26, 2009 3:11 PM

Page 59

Messaging 55

Enter the phone number or Email address of the recipient. At any point while entering your recipient(s) phone number

or Email address, press the left soft key 123 or the

right soft key Add soft keys for additional options.

䊳

Press the left soft key

123

to change Text Mode. Choose Word, Abc, ABC, 123, Symbols and Domain Extensions modes

of text entry.

䊳

Press the right soft key

Add

to add a recipient From

Contacts, Recent Calls, Groups, To Online Album, or To Contacts.

Note: If you do not select an option press the to return to your message.

6. Press the key to move to the Tex t field. In the text

field, compose your message using the keypad. At any point while composing a message, press the left soft key

Abc or the right soft key Options soft keys to

display additional options.

䊳

Press the left soft key

Abc

to change Text Mode. Choose Word, Abc, ABC,123, Symbols and Quick Text modes of text

entry.

䊳

Press the right soft key

Options

to display a pop-up menu

with the options listed:

•Preview

: Shows the message before it is sent.

• Save As Draft

: Save the message to your Draft folder.

• Add Quick Text

Choose from up to 15 pre-loaded messages. You can add 15 additional messages by pressing the right soft key New and you can erase Quick Text messages by pressing the left soft key Erase.

• Priority Level

: Save the message with a High or Normal priority.

• Cancel Message

: Cancels the message and allows you to save it

in the Drafts folder.

Note: If you do not select an option press the to return to your message.

7. Press the Directional key down to highlight the

Picture field. Press the left soft key My Pics to add a

picture, and follow the prompts. Press to attach the

highlighted image.

CLRCLR

u350.book Page 55 Thursday, February 26, 2009 3:11 PM

Page 60

Note:

Preloaded pictures in MY PICS are copy protected and can't be sent as

part of a picture message.

8. Highlight the Sound field. Press the left soft key

Sounds

to select a sound.

Highlight the desired sound or highlight Record New to record a sound and press .

9. Highlight the Subject field. In the Subject field, compose

your message using the keypad. Press the left soft key

Abc to change entry mode.

10. Press the right soft key

Options

to display a pop-up

menu with the options listed:

•Preview

: Shows the message before it is sent.

• Save As Draft

: Save the message to your Draft folder.

• Add Quick Text

Choose from up to 15 pre-loaded messages. You can add 15 additional messages by pressing the right soft key New and you can erase Quick Text messages by pressing the left soft key Erase.

• Priority Level

: Save the message with a High or Normal priority.

• Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

11. Highlight the Name Card field. Press the left soft key

Add to select My Name Card or an entry from your

Contacts list. Follow the prompts and press to insert.

12. Once all fields are complete, press to send the

message to the intended recipient(s).

Creating and Sending Voice Messages

You can send voice messages to another mobile phone or to an Email address.

1. From the home screen, press the left soft key

Message. Press

New

Message.

2. Press Voice Message.

3. Press

to start recording. Press the left soft key

Pause

if needed. After completing your recording, press

STOP

to end the recording.

4. At the

NEW VOICE MSG

screen, enter the phone number or Email address of the recipient. At any point while entering

your recipient(s) phone number or Email address, press the

left soft key 123 or the right soft key Add soft keys for additional options.

䊳

Press the left soft key

123

to change Text Mode. Choose

defdef

u350.book Page 56 Thursday, February 26, 2009 3:11 PM

Page 61

Messaging 57

Word, Abc, ABC, 123, Symbols or Domain Extensions modes of text entry.

䊳

Press the right soft key

Add

to add a recipient From

Contacts, Recent Calls, Groups, To Online Album, or To

Contacts.

5. Press the key to move to the Voice field. Your voice

recording is shown. Press the right soft key

Options

display a pop-up menu with the options listed:

•Review

: Plays the voice recording.

• Save As Draft

: Save the message to your Draft folder.

• Priority Level

: Save the message with a High or Normal priority.

• Remove Recording

: Removes the voice recording.

• Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

6. Press the left soft key

Record

to re-record a new voice

recording, if needed.

7. Press the Directional key down to highlight the Tex t

field. In the text field, compose your message using the

keypad. At any point while in the text field, press the left soft key Abc or the right soft key Options soft

keys to display additional options.

䊳

Press the left soft key

Abc

to change Text Mode. Choose: Word, Abc, ABC,123, Symbols or Quick Text modes of text

entry.

䊳

Press the right soft key

Options

to display a pop-up menu

with the options listed:

•Review

: Shows the message before it is sent.

• Save As Draft

: Save the message to your Draft folder.

• Add Quick Text

Choose from up to 15 pre-loaded messages. You can add 15 additional messages by pressing the right soft key New and you can erase Quick Text messages by pressing the left soft key Erase.

• Priority Level

: Save the message with a High or Normal priority.

• Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

䊳

Press the Directional key down to highlight the Subject

field. In the Subject field, compose your message using the

keypad. Press the left soft key

Abc

to change Text Mode. Choose:

Word, Abc, ABC,123, Symbols or Quick Text modes of text

entry.

䊳

Press the right soft key

Options

to display a pop-up menu

with the options listed:

u350.book Page 57 Thursday, February 26, 2009 3:11 PM

Page 62

•Review

: Shows the message before it is sent.

• Save As Draft

: Save the message to your Draft folder.

• Add Quick Text

Choose from up to 15 pre-loaded messages. You can add 15 additional messages by pressing the right soft key New and you can erase Quick Text messages by pressing the left soft key Erase.

• Priority Level

: Save the message with a High or Normal priority.

• Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

8. Press the Directional key down to highlight the

Name Card field. Press the left soft key Add to select

My Name Card or an entry from your Contacts list. Follow

the prompts and press to insert.

Once all fields are complete, press to send the message to the intended recipient(s).

Retrieving New Messages

While text messages from other phones are delivered directly to your phone, Picture messages and Email will be stored in the Inbox of the message server and the server will alert you to new messages. Therefore you need to retrieve new messages to your phone and read them on the phone.

Retrieving a Text Message

When you receive a message the message ringer sounds, (unless turned off), and New Text Message appears in the display along with the closed envelope icon . The date and time of the message also appear in the display.

1. Press to View now or

highlight View later and press

. The message is saved to

your Inbox where you can view it later.

2. With the message open, press the right soft key

Options to Forward, Reply w. Copy, Save Quick Text, Lock,

Add To Contacts, Messaging Font Size, Extract Addresses and Message Info. Press the left soft key

Erase

erase the message.

With the message open, press REPLY to return a message to the sender.

555555555

u350.book Page 58 Thursday, February 26, 2009 3:11 PM

Page 63

Messaging 59

Receiving Multimedia Messages

When you receive a new Multimedia Message, NEW MULTIMEDIA MSG appears in the display along with the options View Now or View Later.

Note:

For the option Reject to appear in the display when you receive a Multimedia Message, Multimedia Auto Receive mode must be set to Off in the Message Settings menu. When you receive a new Multimedia Message, press Yes .

3. After loading, the image (and text if any) contained in the

Multimedia Message appears in the display.

4. Press the Directional key up or down to scroll

through the message or view the entire picture if

necessary.

5. Press the left soft key Mute/Unmute (while an

attached sound byte is playing), or the right soft key

Options. The following options may appear in the display:

•Play Again

: Replays the sound byte attached to a Picture/Voice

Message.

•Forward

: Forward the message to another recipient.

•Erase

: Deletes the message. Only displays in menu when a sound

byte isn’t attached to the message that was sent.

• Save Picture

: Saves the picture in a Picture message to My

Pictures.

• Save As Ringtone:

Saves the sound byte received with the

message as a ringtone.

•Save Sound

: Saves the sound received with the message.

•Save Quick Text

: Saves the text received in the message to the

Quick Text list.

•Save Name Card

: Saves the attached name card to your Contact

List.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

•

Message Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

• Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

• Message Info

: Provides the following information: From and Callback #, Priority, Message Type, Size and Attachment(s) name and size.

555555555555555555

u350.book Page 59 Thursday, February 26, 2009 3:11 PM

Page 64

Note:

When viewing a Picture message, you can view the previous message

by pressing the Directional key left and view the next message by pressing the right Directional key right.

Receiving Multimedia Messages

When you receive a new Voice Message, NEW PIC-VOICE MSG. appears in the display along with the options View Now or View Later.

Note:

For the option Reject to appear in the display when you receive a Voice

Message, Multimedia Auto Receive mode must be set to Off in the Message Settings menu. The default Pic-Voice Auto Receive value is set to On.

1. When you receive a new Voice Message, press Yes.

2. After loading, the recording (and text if any) contained in

the Voice Message appears in the display.

3. Press the Directional key up or down to scroll

through the message or view the entire picture if

necessary.

4. Press the left soft key Mute/Unmute (while an

attached sound byte is playing), or the right soft key

Options. The following options may appear in the display:

•Play Again

: Replays the sound byte attached to a Picture/Voice

Message.

•Forward

: Forward the message to another recipient.

•Erase

: Deletes the message. Only displays in menu when a sound

byte isn’t attached to the message that was received.

• Save As Ringtone:

Saves the sound byte received with the

message as a ringtone.

• Save Sound

: Saves the sound received with the message.

•Save Quick Text

: Saves the text received in the message to the

Quick Text list.

•Save Name Card

: Saves the attached name card to your Contact

List.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

• Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

555555555555555555

u350.book Page 60 Thursday, February 26, 2009 3:11 PM

Page 65

Messaging 61

• Message Font Size

Allows you to select the font size of the message

being viewed. Select Normal or Large.

• Message Info

: Provides the following information: From and Callback #, Priority, Message Type, Size and Attachment(s) name and size.

Note:

When viewing a Voice message, you can view the previous message by pressing the Directional key

left and view the next message

by pressing the right Directional key right.

With the message open, press REPLY to return a message to the sender.

Receive Messages While in a Call

1. When you receive a message while in a call, the NEW TXT

MESSAGE or NEW MULTIMEDIA MSG dialog box appears

in the display. Press to View Now or highlight View

Later and press .

Note:

Text messages can only be viewed during a call. Picture and Voice messages can not be downloaded during a call.

2. You can view a text message without disconnecting your

call by pressing the right soft key Options. Select

Main Menu > Messaging and press .

3. Press Inbox, highlight the message you want to

view and press OPEN to view the message.

View a Picture/Voice Message Later

1. When you receive a new Picture/Voice message that you

would like to view later, highlight View Later and press

2. To view the message, press the left soft key Message

Press

Inbox

4. Highlight the unopened message, then press OPEN.

The INBOX screen appears first with information about the

message. Press DOWNLOAD to view Picture/Voice

message.

Message Folders

Your phone provides default message folders for your Text and Picture messages.

abc

u350.book Page 61 Thursday, February 26, 2009 3:11 PM

Page 66

Note:

To quickly view all messages in the Inbox, Sent, or Drafts folders, open

one message and then press the Directional key

right to view the

next message or press the Directional key

left to view the

previous message.

Inbox

Received messages of all types are stored in the Inbox folder.

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press Inbox.

4. Press the Directional key up or down to highlight the

message that you wish to view.

5. Press OPEN to view contents of the highlighted

message.

6. While viewing a message press the right soft key

Options to display the available options. Options are

dependent on the message type:

•

For Text Messages the following options may appear in the display:

–

Forward

: Forwards the message to another recipient.

–

Reply w. Copy

: Replies to the received message with a text message

and allows you to send a copy of the message to another contact.

–

Save Quick Text

: Saves the text received in the message to the

Quick Text list.

–

Lock/Unlock: Locks or unlocks the entry to prevent accidental

deletion.

–

Add To Contacts

: Saves the number of the sender to your Contacts

as a new entry or add to an existing entry.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Extract Addresses

: Displays all Contact Numbers, Email Addresses

and URLs extracted from the opened message. Press left soft key

Save

to save the number to your contacts or press to call the

sender.

–

Message Info

: Provides the following information: From (also provides the date and time the message was received), Callback #, Priority, Message Type, Size and Attachments (if any).

•

For Picture/Voice Messages the following options may appear in the display:

–

Play Again

: Replays the sound byte attached to a Picture/Voice

Message.

–

Forward

: Forwards the message to another recipient.

–

Erase

: Deletes the message. Only displays in menu when a sound byte

is attached to the message that was received.

–

Save Picture

: Saves the picture sent in a Picture message to My

Pictures.

–

Save As Ringtone

: Saves the sound byte received with the message

as a ringtone.

abcabc

u350.book Page 62 Thursday, February 26, 2009 3:11 PM

Page 67

Messaging 63

–

Save Sound

: Saves the sound byte received with the message in My

Sounds.

–

Save Quick Text

: Saves the text received in the message to the

Quick Text list.

–

Save Name Card

: Saves the attached name card to your Contact

List.

–

Lock/Unlock: Locks or unlocks the entry to prevent accidental

deletion.

–

Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: From (also provides the date and time the message was received), Callback #, Priority, Message Type, Size and if a Picture, Sound or Name Card were included in the message.

7. For Text and Picture/Voice Messages, press REPLY to

reply to the message.

Note:

When the Inbox exceeds 100 text messages, the first message in the list is replaced with the next incoming message. Picture messages are replaced when the phone’s maximum memory is reached. For information on how to set Auto Erase and Auto Receive see “Changing Message Settings” on page 67.

Sent

Your phone stores messages in the Sent folder, regardless of whether the message was successfully transmitted. Verify if and when a message or Email was successfully transmitted by enabling the Auto Save Sent feature in Message Settings.

Note:

Enhanced Delivery Acknowledgement can't be set for Picture message.

Review Messages in the Sent Folder

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press Sent.

4. Highlight the message you wish to review, then press

OPEN.

5. While viewing the message, press the right soft key

Options

to display options listed. Options are dependent on

the type of message:

•

For Text Messages the following options may appear in the display:

–

Forward

: Forwards the message to another recipient.

–

Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

abc

defdef

u350.book Page 63 Thursday, February 26, 2009 3:11 PM

Page 68

–

Save Quick Text

: Saves the text sent in the message to the Quick

Text list.

–

Add To Contacts

: Adds the sender’s information to your contact list.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: Send To: (also provides the date and time the message was received), Callback #, Priority, Message Type, Size and if a Picture, Sound or Name Card were included in the message.

•

For Picture/Voice Messages the following options may appear in the display:

–

Play Again:

Replays the sound in the message.

–

Forward

: Forwards the message to another recipient.

–

Erase

: Deletes the message. Only displays in menu when a sound byte

is attached to the message that was sent.

–

Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

–

Save Quick Text

: Saves the text sent in the message to the Quick

Text list.

–

Add To Contacts

: Adds the sender’s information to your contact list.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: Send To Number (also provides the date and time the message was sent), Priority, Message Type, Size, Attachment(s) (if a Graphic, Sound or Name Card were included in the message.

Note:

If no sound byte is attached to the message, press the left soft key

Erase to delete the message. Press the left soft key

Mute/

Unmute

to mute/unmute a sound byte attached to the picture

message.

6. Press the Directional key up or down to highlight the

desired option.

7. Press to perform the function for the highlighted

option.

8. From the Sent menu, press the left soft key Erase to

delete the message from the Sent folder. Highlight Ye s

press to delete, or No and press to return to the

Sent menu.

Drafts

Draft messages are those that have been composed but never sent. You can return to the Drafts folder at any time to view, edit, or send a draft message.

Create a Draft Text Message

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press New Message.

abcabc

u350.book Page 64 Thursday, February 26, 2009 3:11 PM

Page 69

Messaging 65

Highlight the type of message you want to create and press .

5. Enter the phone number of the recipient, then press the

6. Compose your message using the keypad, then press the

right soft key Options. A pop-up menu appears in the display.

7. Scroll down with the Directional key until Save As

Draft is highlighted, then press . A confirmation

message appears in the display and your message is saved to the Drafts folder.

View and Edit Draft Messages

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press Drafts.

4. Press the Directional key to highlight the message

you wish to view, then press EDIT. The message

opens in the To: field with the destination address

displayed.

5. Press to backspace and/or delete any characters in

the display, if desired. Press and hold to erase all

characters in the field.

6. Press the right soft key Options. A pop-up menu

appears in the display with the options listed.

For Text Messages the following options may appear in the display:

•

Save As Draft

: Save the message to your Draft folder.

•Add

: Select this option to display the following sub-menus:

–

Quick Text

: Choose from up to 15 pre-loaded messages. You can add

15 additional messages by pressing the right soft key

New and you can erase Quick Text messages by pressing the left soft key Erase.

–

Graphic

: Lists preloaded and downloaded graphics.

–

Animation

: Lists preloaded and downloaded animations.

–

Sound

: Lists preloaded and downloaded sounds.

–

Name Card

: Attach My Name Card information or information from

one of your Contacts.

•

Edit Text Format

: Allows you to edit the text size, alignment, style,

color, and background color.

•

Priority Level

: Save the message with a High or Normal priority.

• Callback #

: Provides the ability to send a callback # with the

message.

abcabc

ghighi

CLRCLR

CLR

u350.book Page 65 Thursday, February 26, 2009 3:11 PM

Page 70

•

Cancel Message

: Cancels the message and allows you to save it

in the Drafts folder.

For Picture/Voice Messages the following options may appear in the display:

–

Preview

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Add Quick Text

: Choose from up to 15 pre-loaded messages. You can add 15 additional messages by pressing the right soft key New and you can erase Quick Text messages by pressing the left soft key Erase.

–

Priority Level

: Save the message with a High or Normal priority.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

7. Press the Directional key up or down to highlight the

desired option. Press to perform the function for the highlighted option.

8. Highlight the following fields for Picture Messages and

press the right soft key Options to display the

following options:

•Picture

: Insert a picture.

Note:

Press the left soft key My Pics to add a new picture.

–

Preview

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Priority Level

: Save the message with a High or Normal priority.

–

Remove Picture

: Deletes the attached Picture.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

• Sound

: Insert a sound byte.

Note:

Press the left soft key Sounds to add a new sound byte.

–

Preview

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Priority Level

: Save the message with a High or Normal priority.

–

Remove Sound

: Deletes the attached sound byte file.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

• Subject

: Insert the subject of your message.

Note:

Press the left soft key Abc to change Text Mode.

–

Preview

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Add Quick Text

: Choose from up to 15 pre-loaded messages. You can add 15 additional messages by pressing the right soft key New and you can erase Quick Text messages by pressing the left soft key Erase.

–

Priority Level

: Save the message with a High or Normal priority.

u350.book Page 66 Thursday, February 26, 2009 3:11 PM

Page 71

Messaging 67

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

•Name Card

: Insert and name card.

Note:

Press the left soft key Add to add a name card.

–

Preview

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Priority Level

: Save the message with a High or Normal priority.

–

Remove Name Card

: Deletes the name card.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

9. Press the Directional key up or down to highlight the

desired option. Press to perform the function for the

highlighted option.

10. Once you’ve returned to the message composer, press

to send the message, if desired.

Erase Options

You can erase unlocked messages in your Inbox, Drafts folder, or Sent folder. Locked messages are not erased.

To erase messages:

1. From the Messaging menu, press Options.

2. The following options are available:

•Erase Inbox

: Erases unlocked messages in your Inbox.

• Erase Drafts

: Erases unlocked messages in your Drafts folder.

•Erase Sent

: Erases unlocked messages in your Sent folder.

•Erase All

: Erases unlocked messages in all message folders

(Inbox, Drafts and Sent).

Changing Message Settings

This menu allows you to define settings for messages sent or received on your phone. To access your message settings, use the following steps:

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press Settings.

4. Select the message type you would like to change and

press . Choose from the following options:

• Entry Mode

: Sets the default entry mode for messaging. Choose from

Word, Abc, ABC, or 123.

• Auto Save Sent:

Saves all messages sent. Choose from: On, Off, or

Prompt.

• Auto Erase Inbox

: Erases the oldest message of the same type (Text or Picture) when the maximum number of received messages of that type is exceeded in the Inbox. For example,

When the Inbox

exceeds 100 text messages, the first message in the list is replaced

abc

u350.book Page 67 Thursday, February 26, 2009 3:11 PM

Page 72

with the next incoming message. Picture messages are replaced when the phone’s memory is full.

Choose from On or Off.

• Messaging Font Size

: Allows you to set the message font size for

message received. Choose Normal or Large.

•TXT Auto View:

Automatically displays the text message when

received. Choose from On or Off.

• Multimedia Auto Receive

: Automatically receives picture and voice

messages into your inbox. Choose from On or Off.

• Domain Extensions

Choose from 4 different pre-loaded domain

extensions or create a new domain extension.

•Quick Text

: Displays the Quick Text pre-defined entries for Text Message and Picture Message. Press the right soft key New to add to the Quick Text list or press the left soft key Erase to erase. Enter your new text and press . The new Quick Text item shows in the first position of the list.

• Voicemail #

: Enter the speed dial entry set for your voicemail.

• Callback #

: Allows you to use or edit the number assigned to your

handset. Choose from On or Off.

• Signature

: Adds the signature text to each message sent. Choose

from None or Custom.

Voicemail

New voicemail alerts are sent via a free Text message. These messages indicate how many new and urgent voicemails are in your voice mailbox. Open the free text message to view the number of new and urgent voice messages in your voice mailbox. If a caller leaves a callback number, this number will also be sent via Text message.

Note:

Standard Text Messaging charges do not apply.

Receive Voicemail Messages

When you receive a new voicemail message you’ll hear a sound and a Text message appears in the display.

1. Press the Directional key up or down to select

Listen Now or Listen Later. Press .

View Voicemail Messages in the Inbox Folder

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press Voicemail.

4. Press CALL to dial voicemail and retrieve your

message(s).

abcabc

jkljkl

u350.book Page 68 Thursday, February 26, 2009 3:11 PM

Page 73

Messaging 69

Send and receive Email using Mobile Web. Use these steps:

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press Email.

4. Press the Directional key up or down, select one of

the following Email providers and press .

•

MSN® Hotmail

•

AOL® Mail

•

Yahoo!® Mail

•

VZ.net Mail

•

5. Use the on-screen application specific functions and

options to use the Email applications.

Chat

Join wireless chat rooms from your phone. Send text messages and icons to many chat room participants or launch one-on-one (private) chat rooms. To access a chat room from the browser:

1. From the home screen, press

2. Press for

Messaging

menu.

3. Press

Chat.

Highlight one of the following chat

rooms and press .

•

MySpace

•

Facebook

•

Photobukt

•

Zannel

•

Powerchat

•

Friendz

•

Lavachat

•

Best Pix

•

4. Use the on-screen application specific functions and

options to use the Chat applications.

abcabc

mnomno

abc

pqrs

u350.book Page 69 Thursday, February 26, 2009 3:11 PM

Page 74

Section 8: Bluetooth

This section explains Bluetooth settings for your phone.

Bluetooth Menu

About Bluetooth

Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection.

Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a range of one another, you can exchange information between them, even if they are located in different rooms.

Note:

When connected to your Bluetooth headset, press the multi-function key on the headset to use Voice Commands’s Voice Dial feature.

Bluetooth Service Profiles

Actually, the Bluetooth specification is a protocol that describes how the short-range wireless technology works, whereas individual profiles describe the services supported by individual devices. Profiles reduce the chance that different devices will not work together.

Your phone supports the following Bluetooth profile services:

–

Voice Calls are supported using any of the following depending on the accessory:

•HSP

- Headset

•HFP

- Hands-free profiles*.

– Transfer Object allows sending an

OPP

- Object Push Profile which allows transfer of vCard (i.e., Contact information) between devices and vCalendar (i.e. Calendar events).

–

Automobile Kits can use any of the following:

HFP

- Hands-free or

PBAP

- Phone Book Access Profiles*.

– Connectivity Connections (i.e. computer) are supported using

SPP

- Serial Port (connecting two BT devices).

For vehicle/accessory compatibility, go to

www.verizonwireless.com/bluetoothchart

. Phone does not support all

Bluetooth OBEX profiles.

The following Bluetooth options are available:

Turning Bluetooth On or Off

When the Bluetooth radio is turned on, you can use the Bluetooth features available. When the Bluetooth radio is turned off, you cannot send or receive information via Bluetooth. To save battery life or in situations where radio use is prohibited, such as airline traveling, you can turn off the Bluetooth wireless technology.

u350.book Page 70 Thursday, February 26, 2009 3:11 PM

Page 75

Bluetooth 71

NOTE

: The menu navigation instructions for this section uses the

default

Urban

display theme,

List

layout.

1. From the home screen, press

2. Press for Bluetooth menu.

3. Press the left soft key

to turn

Turn On or Turn O f f

Note:

If Bluetooth is turned on, the Bluetooth icon displays in the top line of the display.

This option searches for a recognized Bluetooth wireless device.

1. From the home screen, press

2. Press for Bluetooth menu.

3. Add New Device is highlighted, press .

Note:

If you have NOT already activated Bluetooth on the phone, the message: “TURN BLUETOOTH POWER ON?” displays. Highlight Yes to activate or No to exit and press .

4. The prompt: “PLACE DEVICE YOU ARE CONNECTING TO IN

DISCOVERABLE MODE.” is shown. Activate your Bluetooth

device and press .

5. A list of found Bluetooth devices will be displayed.

Highlight a Bluetooth device to be paired and press .

6. The phone automatically attempts to send a passkey of

"0000" to a hands-free device and shows the message

"ATTEMPTING TO AUTO PAIR". If the default passkey is not successful, the phone will display the message "AUTO

PAIR FAILED. ENTER PASSKEY".

(If you are attempting to pair with a car kit, be sure to clear

any error message on the car kit display first.) Enter the

correct passkey for the device you want to pair, and press

7. Select Ye s to pair the devices. Once connected the

Bluetooth Connected icon appears in the upper half

of the display. When pairing is complete, highlight Always

Ask or Always Connect (may display depending on the device) and press .

jkljkl

u350.book Page 71 Thursday, February 26, 2009 3:11 PM

Page 76

Bluetooth Settings

The Bluetooth wireless technology settings menu provides the ability to view and change the device name, show the visibility, and set the security for the device.

1. From the home screen, press

2. Press for Bluetooth menu.

3. Press the right soft key

Options

. The Bluetooth menu

displays with the following options:

•My Phone Name

: Allows you enter a customized name.

• Discovery Mode

: Allows other users to see your accessibility.

Select On for other devices to see your device, or Off for no visibility.

Note:

After selecting On, users have one minute to see your accessibility. After which Discovery Mode will automatically default back to off.

• Supported Profiles

: Displays a list of supported Bluetooth

profiles. Highlight a profile and press to view a description.

•My Phone Info

: Shows the handset information.

• Auto Pairing

: Allows you to turn automatic pairing of Bluetooth

devices on or off.

Transferring vCalendar events via Bluetooth

You can transfer vCalendar events via Bluetooth. Use the following steps:

1. From the home screen, press

2. Press for Bluetooth menu.

3. If not paired with a Bluetooth device, see “Search” on

page 71.

4. Highlight the desired Bluetooth device.

5. Press right soft key Options and then press

Send Calendar Event.

6. Navigate to highlight a Calendar event in your phone

(which is indicated by light purple color).

7. Press

VIEW

to see a list of all events on that day.

8. Highlight the one(s) you want to send and press

MARK

to select the appropriate one(s). Press the left soft

key

Done

when finished marking events.

9. When you see a prompt

“CONNECT TO <Bluetooth device>”

Yes

is highlighted, press to connect to that device.

10. The selected Calendar event(s) will be sent to the target

Bluetooth device.

jkljkl

pqrspqrs

u350.book Page 72 Thursday, February 26, 2009 3:11 PM

Page 77

Changing Your Settings 73

Section 9: Changing Your Settings

This section explains the sound and phone settings for your phone. It includes display settings, security settings, and extra settings associated with your phone.

Note:

All instructions on accessing or changing the features will begin from the

SETTINGS & TOOLS

menu.

My Verizon

The My Verizon menu connects to the Verizon Wireless Mobile Web. You can setup Favorites or choose from the available applications.

Tools

The Tools menu provides the ability to access the following menus:

•

Voice Commands

: For more information, refer to

“Voice

Commands”

on page 24.

•

Calculator

: For more information, refer to

“Calculator”

on page 96.

•

Calendar

: For more information, refer to

“Calendar”

on page 98.

•

Alarm Clock

: For more information, refer to

“Alarm Clock”

page 99.

•

Stop Watch

: For more information, refer to

“Stop Watch”

page 101.

•

World Clock

: For more information, refer to

“World Clock”

page 101.

•

Notepad

: For more information, refer to

“Notepad”

on page 102.

Bluetooth Menu

For more information, refer to “Bluetooth” on page 70.

Sounds Settings

Sounds menu provides the ability to access the following menus:

Call Sounds

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Sounds Settings.

4. Press Call Sounds or, press Call Ringtone

to get new ringtones from “Media Center” (

Get New

Applications

) or choose from pre-loaded ringtones.

5. Under

Call Sounds

, press

Call Vibrate

to turn Call

Vibrate On or Off.

6. Press to save the setting.

wxyz

ghighi

abc

u350.book Page 73 Thursday, February 26, 2009 3:11 PM

Page 78

Alert Sounds

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Sounds Settings.

4. Press Alert Sounds. For the following options, you

can set the tone for the message alerts. You can also set

vibration on and set a reminder.

•TXT Message

: allow you to set a notification for TXT message.

• Multimedia Message

: allow you to set a notification for Pic/Voice

message.

• Voicemail

: allow you to set a notification for Voicemail Message.

• Emergency Tone

: Allows you to set the alert for emergency dialing.

The options for the emergency tone are:

–

Alert: Phone plays the Emergency Dialing tone except when the master

volume setting is Vibrate or All Sounds Off.

Note:

If Emergency Tone is set to

Alert

and Master Volume is set to

Vibrate

, the handset will vibrate after emergency dialing. If Emergency Tone is set to

Alert

and the master Volume is set to

All

Sounds Off

, the handset will not sound after emergency dialing.

–

Vibrate: Phone will vibrate only and will not play the Emergency Dialing

tone.

Note:

If Emergency Tone is set to

Vibrate

and Master Volume is set to

All

Sounds Off

, the handset will not sound after emergency dialing.

–

Off: Phone will not play the Emergency Dialing tone or vibrate.

• Device Connect

: allow you to set a notification when you connect

to a device.

Keypad Sounds

Select the sound of the keypad when pressed.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Sounds Settings.

4. Press

Keypad Sounds.

5. Select Default or Xylophone.

6. Press

to set the new dial sound.

Keypad Volume

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Sounds Settings.

4. Press Keypad Volume.

wxyzwxyz

ghighi

abcabc

wxyzwxyz

ghi

defdef

wxyzwxyz

ghi

u350.book Page 74 Thursday, February 26, 2009 3:11 PM

Page 79

Changing Your Settings 75

Press the Directional key up or down or Volume key

to adjust the keypad volume.

6. Press

SET

to save.

Service Alerts

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Sounds Settings.

4. Press Service Alerts. For the following options, you

can turn the Service Alert On or Off.

•ERI

: Sounds an alert when you go into and out of your coverage

areas.

•Minute Beep

: While on a call your phone beeps after every minute

of usage.

• Call Connect

: Sounds an alert when a call is connected and when

a call has ended.

• Service Change

: Select On to hear an alert sound when there is a

change in service availability. Select

Off

for no alert sound.

Power On/Off

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Sounds Settings.

4. Press

Power On/Off. You can set the sounds for

Power On and Power Off to either On or Off.

Display Settings

The

Display

menu affects the menu style, home screen

animation, backlight settings, and more.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

• Banner

: Create your own personalized greeting that appears in home screen or choose the ERI Banner which displays the network in which you have subscribed.

• Backlight

: Choose settings for the LCD and/or Keypad.

•Contrast

: Controls the contrast setting for the front external LCD.

• Wallpaper

: Choose pictures from My Pictures to use as the background display for your home screen. Choose pictures from My Pictures to use as the background display for your Front Screen.

•Display Themes

: Choose from 3 themes used for menu display.

• Main Menu Settings

: Choose from 3 main menu layout themes

for the menu display.

•Dial Fonts

: Choose a dialing font size.

•Clock Format

: Choose digital or analog format for time display.

wxyzwxyz

ghighi

jkljkl

wxyzwxyz

ghighi

mnomno

wxyz

jkljkl

u350.book Page 75 Thursday, February 26, 2009 3:11 PM

Page 80

Select an option and press .

Banner

allows you to create your own personalized greeting that appears in home screen. Or you can display the network to which you are subscribed.

To create a personal banner:

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

4. Press Banner.

5. Press Personal Banner to create a customized

banner for your handset.

Note:

Press and hold to erase an existing banner, if necessary.

6. Enter a word or short phrase (18 characters or less) to

appear in the home screen. Press to save banner.

To turn on an ERI banner:

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

4. Press Banner.

5. Press to set the ERI Banner for your handset.

6. Select On or Off and press .

Backlight

Set the

backlight

for the display or keypad to remain on for a specified period of time or to remain on as long as the flip is open.

Note:

Prolonged backlight use drains your battery faster.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

4. Press Backlight. The menus listed appear in the

display.

•Display

: The following options are for the Main LCD.

–

Duration

: Can be set to 7 seconds, 15 seconds, 30 seconds, or

Always On.

–

Brightness

: Press the Directional key

left or right to adjust

the brightness.

•Keypad

: The following options are for the keypad.

wxyzwxyz

jkljkl

CLRCLR

wxyzwxyz

jkl

abc

wxyzwxyz

jkl

abc

u350.book Page 76 Thursday, February 26, 2009 3:11 PM

Page 81

Changing Your Settings 77

–

7 Seconds

: The keypad is on for 7 seconds.

–

15 Seconds

: The keypad is on for 15 seconds.

–

30 Seconds

: The keypad is on for 30 seconds.

–

Always On

: The keypad is always on.

5. Highlight a menu and press to enter the highlighted

option’s menu and change settings as desired.

Contrast

Set the

front contrast

for the display on the external LCD.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

4. Press Contrast. Press Directional key left or

right to adjust the contrast of the front external LCD and

press .

Wallpaper

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

4. Press Wallpaper.

5. Press Main Screen or Front Screen.

• Main Screen

: Choose My Pictures (allows you to select an image

from the My Pictures folder.).

• Front Screen

: Choose My Pictures (allows you to select an image from the My Pictures folder.) to select the wallpaper that will appear in the main or front LCD display.

6. Select your desired picture and press .

Display Themes

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

4. Press Display Themes.

5. Press the left soft key

Preview.

Press the Directional key left or right to cycle through thumbnails of the

themes.

6. Press the left soft key

List

to return to the list.

7. Make your selection and press to save.

Main Menu Settings

Choose 3 preset main menu layout themes for the menu display.

1. From the home screen, press

2. Press for Settings & Tools menu.

wxyzwxyz

jkljkl

defdef

wxyzwxyz

jkljkl

ghighi

abc

wxyz

jkljkl5jkljkl

wxyz

u350.book Page 77 Thursday, February 26, 2009 3:11 PM

Page 82

Press

Display Settings

4. Press Main Menu Settings.

•Tab

: Displays Media Center, Messaging, Contacts, Recent Calls

and Settings & Tools menu icons on the menu screen.

•List

: Displays 9 menu listings on the menu screen.

•Grid

: Displays 9 menu icons in a matrix on the menu screen.

5. Highlight a main menu setting and press .

Dial Fonts

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

4. Press Dial Fonts.

5. Choose

Normal

Large Only

6. Press the Directional key left or right to highlight a

setting and press .

Clock Format

This menu allows you to have time displayed in digital or analog format.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

4. Press Clock Format.

5. Press Main Clock. The following options appear in

the display.

•Analog

: Time appears in clock format.

• Large Analog

: Time appears in clock format in larger size.

• Digital 12

: Time appears in 12-hour digital format. Example:

8:00pm.

• Large Digital 12

: Time appears in 12-hour digital format in larger

size.

• Digital 24

: Time appears in 24-hour digital format. Example:

20:00.

• Large Digital 24

: Time appears in 24-hour digital format in larger

size.

•Off

: No time is displayed.

6. Press the Directional key left or right to view and

press to save the option.

To set the Front Clock display, use the following options:

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Display Settings

jkljkl

mnomno

wxyzwxyz

jkljkl

pqrspqrs

wxyzwxyz

jkl

tuv

wxyzwxyz

jkl

u350.book Page 78 Thursday, February 26, 2009 3:11 PM

Page 83

Changing Your Settings 79

Press Clock Format.

5. Press Front Clock. The following options appear in

the display.

• Digital

: Time appears in 12-hour digital format. Example: 8:00pm.

•Analog

: Time appears in clock format with Roman numerals.

•Off

: No time is displayed.

6. Press the Directional key left or right to view and

press to save the option.

Phone Settings

Airplane Mode

With

Airplane Mode

on, all RF functions for your phone are disabled, and you cannot use your phone to place or receive calls.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press

Airplane Mode

. Highlight On or Off and press

Set Shortcuts

allows you to personalize menu settings for

Set My

Shortcuts

and

Set Directional keys

. Choose menu settings for

each of the shortcut options under

Set My Shortcuts

. In addition,

you can personalize 3 Directional keys (up, down and left) with

Set Directional keys

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press Set Shortcuts.

...or from the home screen, press the Directional key right to launch

My Shortcuts

and press the left soft key

Settings

•Set My Shortcuts: Choose from 34 menu settings for each of the

4 shortcut options.

• Set Directional keys: Choose from 34 menu settings for the up,

left and down Directional keys.

tuvtuv

abcabc

wxyzwxyz

mnomno

wxyz

mnomno

abcabc

u350.book Page 79 Thursday, February 26, 2009 3:11 PM

Page 84

To personalize

Set My Shortcuts

1. Highlight

Set My Shortcuts

and press . Highlight any of

the shortcut options (Shortcut 1, 2, 3 or 4) to change and

press .

2. Highlight any of the menu settings and press .

Note:

Press the right soft key Options to:

1. Reset Shortcut 1,2,3 or 4

or:

2. Reset My Shortcuts,

for resetting the shortcuts to default settings.

For default settings see “Directional key Shortcuts” on page 32..

To personalize

Set Directional keys

1. Highlight

Set Directional keys

and press . Highlight any of the Directional keys (Up, Left or Down) to change and

press .

2. Highlight any of the menu settings and press .

Note:

Press the right soft key Options for:

1. Reset Up, Left or Down Key

or:

2. Reset Directional keys,

for resetting the keys to default settings.

For default settings see “Directional key Shortcuts” on page 32..

Voice Commands

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press Voice Command Settings. For more

information, refer to “Voice Commands Settings” on

page 24.

Language

Change the display language from English to Espanol or vice versa.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press Language.

5. Select a language and press .

Location

Note:

This feature is only available on the Verizon Wireless network.

The Location Global Positioning Service (GPS) setting identifies your location to the network. You can fully enable this setting or set GPS to work only in the case that you dial 911 from your phone.

1. From the home screen, press

wxyzwxyz

mno

def

wxyzwxyz

mno

ghi

u350.book Page 80 Thursday, February 26, 2009 3:11 PM

Page 85

Changing Your Settings 81

Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press Location. The following options appear in

the display:

•Location On

: GPS location setting is on wherever the feature is

available.

• E911 Only

: GPS location setting is on whenever you dial 911 only.

5. Highlight an option and press .

Security

The

Security

menu allows you to lock your phone, set

restrictions, and other security options.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press Security.

5. Enter the lock code (factory settings are the last four digits

of your telephone number) and press . The following

options appear in the display:

•Edit Codes

: Allows you to change the Lock Code for Phone Only or

Calls & Services.

• Restrictions

: Allows you to restrict the Location Setting (Lock/ Unlock Setting), Calls (Outgoing or Incoming calls), and Messages (Outgoing or Incoming messages).

• Phone Lock Setting

: Allows you to set the phone to Unlocked or

lock the phone On Power Up.

•Lock Phone Now

: Allows you to lock the handset.

•Restore Phone

: All settings are reset to factory default settings and all user data is erased including pictures, messages, contacts, and downloaded applications stored on the phone.

Edit Codes

The default lock code is the last four digits of your phone number. Use

Edit Code

to change the code to a lock code of your choice.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press

Security

You’re prompted to enter the lock

code. The default lock code is the last four digits of your

telephone number.

5. Enter the Lock Code and press . Several security

menus appear in the display.

6. Press

Edit Codes

. The following options display:

• Phone Only

: Allows you to edit the lock code for only the handset.

wxyzwxyz

mnomno

jkljkl

wxyzwxyz

mnomno

wxyz

mnomno

u350.book Page 81 Thursday, February 26, 2009 3:11 PM

Page 86

• Calls & Services

: Allows you to edit the lock code for all Calls &

Services.

7. Highlight an option and press . At the “

ENTER NEW

CODE

” prompt, enter the new lock code and press . At

the prompt, confirm new lock code.

8. At the “RE-ENTER NEW CODE” prompt, re-enter lock code

and press .

“

PHONE ONLY CODE SET

” or “CALLS & SERVICES CODE SET”

message appears in display confirming your lock code changed.

Note:

Your phone does not allow you to view the lock code for obvious security reasons. If you change the lock code, be sure to write down or memorize the new code.

Restrictions

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press Security.

You’re prompted to enter the lock

code. The default lock code is the last four digits of your telephone number.

5. Enter the

Lock Code

and press . Several security

menus appear in the display.

6. Press Restrictions.

7. Enter the

Lock Code

then press . The default lock code

is the last four digits of your telephone number. Choose

from the following options:

•

Location Setting

•

Calls

•

Messages

8. Highlight an option and press .

Phone Lock Setting

restricts the use of your phone with the exception of outgoing calls to 911. Phone Lock Setting allows you to answer calls, but to place calls (except to emergency numbers) you have to unlock the phone.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

wxyzwxyz

mnomno

abc

wxyzwxyz

mno

u350.book Page 82 Thursday, February 26, 2009 3:11 PM

Page 87

Changing Your Settings 83

Press Security. You’re prompted to enter the lock code. The default lock code is the last four digits of your

telephone number.

5. Enter the Lock Code and press . Several security

menus appear in the display.

6. Press

Phone Lock Setting

. The following options

display:

• Unlocked

: If locked, unlocks the device or phone, depending on

your selection.

•On Power Up

: The Lock Code is required whenever you power up

the phone.

7. Select an option and press .

Lock Phone Now

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press Security.

You’re prompted to enter the lock code. The default lock code is the last four digits of your

telephone number.

5. Enter the

Lock Code

and press . Several security

menus appear in the display.

6. Press

Lock Phone Now

Your phone returns to the home screen. The Lock Code is

required immediately to access any functions.

Restoring Your Phone Memory to Factory Condition

Restore Phone,

returns all setup options to their factory default.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press

Security

, and enter the lock code and press

5. Press Restore Phone. A prompt appears in the

display asking if you wish to restore default settings and

erase all user data including pictures, messages, contacts,

and downloaded applications stored on the phone.

6. Highlight Yes and press to restore default settings or

select No to return to the Security list.

mnomno

def

wxyzwxyz

mnomno

ghighi

wxyz

mnomno

jkljkl

u350.book Page 83 Thursday, February 26, 2009 3:11 PM

Page 88

Note:

After the phone power cycles back on, you must press *228 to

re-program your phone number.

Call Emergency Numbers in Lock Mode

In Lock Mode, you can dial 911 to place an emergency call.

Note:

If you dial 911, your phone dials the emergency number immediately (no prompt).

System Select

The

System Select

menu allows you to set your roaming options.

For more information, refer to “Roaming Options” on page 24.

NAM Selection

Your phone provides the option of selecting between two NAMs (Number Assignment Modules) or phone numbers. Select either

NAM Selection or Auto NAM Selection.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press NAM Selection. The following options

appear in the display:

•

NAM Selection

•

Auto NAM Selection

5. Make your selection and press .

Quick Search

is an easy way to locate contacts in your Address

Book and Menu items.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Phone Settings.

4. Press Quick Search.

5. Press the right soft key Info to display detail

information about Quick Search. Press to return to

Quick Search Menu. Select On or Off and press .

SEND

SE ND

wxyzwxyz

mnomno

tuvtuv

wxyzwxyz

mno

wxyz

u350.book Page 84 Thursday, February 26, 2009 3:11 PM

Page 89

Changing Your Settings 85

Searching for a Contact

Note:

Quick Search must be turn on to perform the procedures listed below.

1. From the home screen, press the first three numeric keys

that correspond to the letters of the contacts name. For

example, to search for “Sally” you would enter:

2. Press the Directional key up to search for Contacts.

If a match is found, the name(s) appear in the display.

3. Press the key to call the contact.

Searching for a Menu Item

Note:

Quick Search must be turn on to perform the procedures listed below.

From the home screen, press the first three numeric keys that correspond to the letters of the Menu item name. For example, to search for “Inbox” you would enter:

4. Press the Directional key down to search for Menu

items. If a match is found, the menu item(s) appear in the

display.

5. Press the key to access the content of the menu item.

Call Settings

The

Call Settings

menu allows you to select the method for answering incoming calls, setting redial options, setting data options, voice privacy, and more.

Answer Options

The Answer Options menu allows you to select the method for answering incoming calls.

1. From the home screen, press

2. Press for Settings & Tools menu.

S A L

pqrspqrs

abcabc

jkl

SENDS EN D

I N B

ghi

mnomno

abcabc

wxyz

u350.book Page 85 Thursday, February 26, 2009 3:11 PM

Page 90

Press Call Settings.

4. Press

Answer Options. The following options

appear in the display:

• Flip Open

: Calls are answered when the flip is opened.

•Any Key

: Calls are answered when any key is pressed.

• Auto w/Handsfree

: Calls are answered automatically with a 5

second delay.

5. Highlight the method you wish to use for answering calls,

then press MARK. Press the right soft key Mark

All to select all options. Press the left soft key Done.

Auto Retry

automatically redials voice/data calls after a preset

period of time.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Call Settings.

4. Press Auto Retry. The following options are:

•Off

• 10 Seconds

• 30 Seconds

• 60 Seconds

5. Select an option and press .

TTY

Your phone is fully TTY compatible. Connect the TTY equipment to the headset jack. Before you can use your phone with a TTY device, you’ll need to enable TTY functions in the phone.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Call Settings. Press TTY Mode. The

TTY Mode screen displays.

4. A warning appears in the display stating “ENABLING TTY

WILL DISABLE HEADSET AUDIO. CONTINUE?”

Highlight Yes and press to proceed to TTY MODE

screen. Highlight No and press to return to

Call

Settings

menu. Press the Directional key up or down

to select one of the following:

•TTY Full

• TTY + Talk (VCO)

•TTY + Hear (HCO)

•TTY Off

pqrspqrs

wxyzwxyz

pqrspqrs

abcabc

wxyzwxyz

pqrs

def

u350.book Page 86 Thursday, February 26, 2009 3:11 PM

Page 91

Changing Your Settings 87

Press for your selection. TTY MODE SET screen displays.

One Touch Dial

You can use this option to enable or disable the speed dialing feature.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Call Settings.

4. Press One Touch Dial. Select On or Off and press

For more information, refer to “Speed Dialing” on

page 49.

Voice Privacy

Note:

This feature is only available on the Verizon Wireless network.

Voice Privacy when enabled turns on advanced voice encryption. Voice privacy can be set to On or Off.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Call Settings.

4. Press Voice Privacy. The following options appear:

•On

•Off

5. Select an option and press .

Data Settings

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press Call Settings.

4. Press

Data Settings. The following options appear

in the display:

• Data Off

: Phone operates in normal voice call mode.

• Data For Next Call

: Data call is enabled for next call only. Phone

will reset to Data Off mode after call.

• Data Until Powered Off

: Phone will remain in Data Mode until

phone is powered off.

5. Select an option and press .

DTMF Tones

Use this menu to set DTMF settings to Normal, or Long.

1. From the home screen, press

2. Press for Settings & Tools menu.

wxyzwxyz

pqrspqrs

ghighi

wxyzwxyz

pqrspqrs

jkljkl

wxyz

pqrspqrs

mnomno

wxyz

u350.book Page 87 Thursday, February 26, 2009 3:11 PM

Page 92

Press Call Settings.

4. Press DTMF Tones. The following options appear in

the display:

•Normal

: Select for a normal tone.

•Long

: Select for an extended tone.

5. Select an option and press .

Memory

The Memory menu allows you to manage your Save Options (for Pictures, Ringtones and Sounds) on your Phone Memory.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Memory

. The following options are available:

•Memory Usage

: Allows you to see the memory usage for everything stored on your phone. The following options are available:

–

My Pictures

: Pictures you have saved from a Picture message, downloaded via the “Media Center” application, or taken using your phone.

–

My Ringtones

: Ringtones you have downloaded via the “Media

Center” application.

–

My Sounds

: Sounds you have downloaded, recorded using your

phone, or saved from a Picture message with Sound attached.

–

Applications

: Applications you have downloaded via “Media Center”

application.

–

Picture Msg

: Allows you to see the memory usage of Picture

messages that are currently stored in your Inbox, Drafts, or Sent box.

• My Pictures

: Pictures you have saved from a Picture message,

downloaded via the “Media Center” application, or taken using your phone.

• My Ringtones

: Ringtones you have downloaded via the “Media Center”

application.

• My Sounds

Sounds you have downloaded, recorded using your phone,

or saved from a Picture message with Sound attached.

Phone Info

The

Phone Info

menu allows you to view the software and hardware information, your assigned number, and an icon glossary for your phone.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Phone Info

. My Number is highlighted.

4. Press My Number to display the Mobile Device and

Identification numbers.

pqrspqrs

pqrs

wxyzwxyz

tuvtuv

wxyzwxyz

wxyz

u350.book Page 88 Thursday, February 26, 2009 3:11 PM

Page 93

Changing Your Settings 89

Press

SW/HW Version to view the version of software, PRL, ERI, Browser, Media Center, MSUI,

Hardware, ESN, S/W Update Client, WDC, and MEID on

your phone.

6. Press

Icon Glossary to view the list of icons with a

brief description.

7. Press

Software Update to check the status of your

phone’s software and to check for view new software

updates that you can download for your phone.

8. Press to return to the Phone Info menu.

abcabc

defdef

ghighi

CLRCLR

u350.book Page 89 Thursday, February 26, 2009 3:11 PM

Page 94

Section 10: Media Center

This section describes how to download and tones. It also outlines how to take, record and store images and ringtones using your phone.

Note:

All instructions on accessing or changing the features will begin from the

Media Center

menu.

Media Center

The Media Center menu provides sub-menus to Tunes & Tones, Pictures, Games, Mobile Web, Browse & Download and Extras. You can also view memory info to see how much space you’ve used (and have left) for stored media. Use the following steps for each Media Center sub-menu.

NOTE

: The menu navigation instructions for this section uses the

default

Urban

display theme,

List

layout.

1. From the home screen, press

2. Press for Media Center menu. Press the

right soft key Info.

3. Press App Memory to display the memory

available. Press the key to return.

4. Press Phone Memory to view the memory

Available, Used

, and the

Total

amount being used. Press

the key to return.

5. Press View Log to see the file transfer activity.

6. Press the key to return.

7. Press Help to display a list of frequently asked

questions.

8. Highlight an item and press to display help text.

9. Press the key to return.

Tunes & Tones

This menu allows you to get new tunes and tones, record new sounds, and set tunes and tones as your ringtone.

CLRCLR

abcabc

CLRCLR

defdef

CLR

ghi

CLR

u350.book Page 90 Thursday, February 26, 2009 3:11 PM

Page 95

Media Center 91

Get New Ringtones

Use this option to download new ringtones from the Internet.

1. From the home screen, press

2. Press for Media Center menu. Tunes &

Tones will be highlighted. Press .

3. Press Get New Ringtones.

4. Press Get New Applications.

5. You are connected to the Media Center catalog and

presented with available provider ringtone applications.

6. To return to the home screen, press the key.

My Ringtones

1. From the home screen, press

2. Press for My Ringtones.

3. Press Get New Ringtones to access the Media

Center catalog.

4. Press

Get New Applications

to download new

ringtones. Or if you have already downloaded ringtones press

and highlight your selection and press .

To return to the home screen, press the key.

My Sounds

1. From the home screen, press

2. Press for Media Center menu. Tunes &

Tones will be highlighted. Press .

3. Press My Sounds.

4. Record New is highlighted. Press to launch the

RECORD NEW screen. Press REC to record.

5. During the recording, press STOP to stop and

automatically save the recording to My Sounds or press

the left soft key Pause to pause and resume the recording appropriately. Press STOP to save sound.

ENDEN D

defdef

CLRCLR

ENDEN D

def

u350.book Page 91 Thursday, February 26, 2009 3:11 PM

Page 96

Picture

This menu allows you to get new Pictures via Media Center or take new Pictures using your phone’s camera. You can also view the saved pictures.

Get New Pictures

1. From the home screen, press

2. Press for Media Center menu.

3. Press Pictures.

4. Press Get New Pictures.

5. Press Get New Applications. Follow the on-

screen prompts to download pictures and wallpaper from

the Media Center server. Appropriate subscription charges may apply.

My Pictures

My Pictures allows you to review the pictures taken with the camera feature or downloaded and stored into your phone.

1. From the home screen, press

2. Press for My Pictures menu.

3. Press the Directional key in any direction to highlight

a photo, and press VIEW to view the highlighted

picture. Press the right soft key Options to select from

the following options (depending on whether you choose to highlight or highlight and view a photo):

•Send

: Launches the send sub-menu. Select one of the following:

–

Picture Msg

: Allows you to send the image in a Picture Message.

–

To Online Album

Sends picture to VZW Online Album storage.

•Set As

: Set the picture as the Main Wallpaper, Front Wallpaper or

Picture ID.

•Take Picture

: Activates the camera.

•Edit

: Allows you to edit the photo.

•Rename

: Renames picture file name.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

•Full View

: Provides a full screen view of the selected picture.

• Get New Pictures

: Allows you to download pictures and wallpaper

from the Media Center server.

• Manage My Pics

: Launches the Manage My Pics submenu.

• File Info

: Provides the name, size, resolution, date and time to the

selected picture.

4. Highlight your selection and press .

abcabc

ghighi

u350.book Page 92 Thursday, February 26, 2009 3:11 PM

Page 97

Media Center 93

Take Pictures

1. From the home screen, press the

Camera

key

on the right side of the phone.

2. Press the left soft key

My Pics

to view images already

saved to your phone.

Press the right soft key Options, to choose the specific camera settings. Press the Directional key up or

down to advance to each setting category, and to make

selections within each category. The following categories are available:

•Resolution

High (640x480), Med (320x240), & Low (160x120).

•

Night Shot: Allows you to turn Night Shot Off or On.

•Self Timer

Off, 5 Seconds, 10 Seconds

• White Balance

: Allows you to set this option from the following choices:

Auto, Sunny, Cloudy, Tungsten, or Fluorescent.

• Quality

Fine, Normal, Economy

•

Ready Sound

: The sound you hear before you capture the image. Off,

Say Cheese!, Look here, 1,2,3,!

•

Shutter Sound

: Allows you to select a shutter sound. Shutter, Okay,

Chime, No Sound.

• Color Effects

Allows you to set this option from the following choices:

Normal, Black & White, Antique, Negative, Green and Aqua.

•Preview Mode

: Allows you preview the image in Full screen or Standard

screen.

3. To exit the camera, press the key.

Taking a Picture with the flip closed

1. Press and hold the

Camera

key on the right side

of the phone.

2. Press the

Camera

key to capture a picture. The

picture is automatically saved to

My Pics

Online Album

Stores pictures to your online album.

Note:

You must first setup your account on the Verizon Wireless website: www.verizonwireless.com before establishing a connection.

1. From the home screen, press

2. Press for Media Center menu.

3. Press Picture.

4. Press Online Album. The VZW Online Album sign-

on screen displays.

ENDEN D

abc

ghi

u350.book Page 93 Thursday, February 26, 2009 3:11 PM

Page 98

Enter your Mobile Number and Password. Highlight LOGIN and press . You are now connected to your

online album.

Games

Select from several fun and interesting applications or a broad category of games that you can play on your phone.

1. From the home screen, press

2. Press for Media Center menu.

3. Press Games.

4. Press Get New Applications.

5. Press the Directional key up or down to make a

selection and press .

6. Choose the charge

Either Subscription

Unlimited

, then

press . Follow in screen prompts to apply.

Mobile Web

1. From the home screen, press

2. Press for Media Center menu.

3. Press Mobile Web.

Tip: Default shortcut to launch the Verizon Wireless Mobile Web, press the

Directional key up.

4. The browser is launched and a pop up screen with

available applications is displayed. Press the Directional key to browse the categories.

5. Once the desired category is highlighted, press to

enter the category list.

When you use Mobile Web, some of the keys operate differently than during a normal phone call. It presents on-screen items in any of the following ways:

•

Text or numeric input

•

Links (embedded in content)

•

Numbered options (some options may not be numbered)

•

Simple text

You can utilize the options or links by using the soft keys.

Browse & Download

applications that keep you in touch with the

world, keep you organized, and help you find the coolest spots.

1. From the home screen, press

2. Press for Media Center menu.

defdef

ghighi

u350.book Page 94 Thursday, February 26, 2009 3:11 PM

Page 99

Media Center 95

Press Browse & Download.

4. Press Get New Applications.

5. Highlight the application to download and press .

6. Follow on screen subscription prompts and press .

The download process begins. At the “App installed

successfully. Would you like to run it?” prompt, press Yes

to launch application, or No to return to category list.

Note:

The Browse & Download menu will display all downloaded applications, with the most current download first.

VZ Navigator

VZ Navigator gives you all the features of an advanced navigation system right on your phone. Get spoken turn-by-turn directions, maps, local point of interest search and more.

1. From the home screen, press

2. Press for VZ Navigator.

Extras

1. From the home screen, press

2. Press for Media Center menu.

3. Press Extras.

4. Press Get New Applications.

5. Highlight the desired application to download and press

6. Follow on screen subscription prompts and press .

The download process begins. At the “App installed

successfully. Would you like to run it?” prompt, press Ye s to launch application, or No to return to category list.

jkljkl

tuvtuv

mno

u350.book Page 95 Thursday, February 26, 2009 3:11 PM

Page 100

Section 11: Tools

The topics covered in this section allow you to schedule appointments, view the calendar, set an alarm, view time zones, take notes, and perform simple math calculations.

Note:

All instructions on accessing or changing the features will begin from the

SETTINGS & TOOLS

menu.

Voice Commands

For more information, refer to “Voice Commands” on page 24.

Calculator

You can perform calculations, including addition, subtraction, multiplication and division using your phone.

Normal

Note:

The menu navigation instructions for this section uses the default Urban display theme, List menu layout.

1. From the home screen, press

2. Press for Settings & Tools menu.

3. Press

Tools,

Calculator,

Normal.

The Calculator opens.

4. Enter the first number in your equation using the keypad.

(Numbers can be up to 15 digits long.)

5. Press the right soft key Operator to display a pop-up

menu which allows you to enter a Parenthesis or Power if

desired. Press the left soft key Clear or to clear

all data entered.

6. Press to change the sign for a number to a

negative.

7. Press to add a decimal point.

8. Use the Directional key to set the type of calculation

you wish to perform. Your choices are as follows:

• Up key

: [+] Addition

• Down key

: [-] Subtraction

• Right key

: [x] Multiplication

• Left key

: [÷] Division

9. Use the keypad to enter the second number into your

equation.

wxyzwxyz

abcabc

abc

CLRCLR

u350.book Page 96 Thursday, February 26, 2009 3:11 PM